1 /* 2 * Intel 82975X Memory Controller kernel module 3 * (C) 2007 aCarLab (India) Pvt. Ltd. (http://acarlab.com) 4 * (C) 2007 jetzbroadband (http://jetzbroadband.com) 5 * This file may be distributed under the terms of the 6 * GNU General Public License. 7 * 8 * Written by Arvind R. 9 * Copied from i82875p_edac.c source: 10 */ 11 12 #include <linux/module.h> 13 #include <linux/init.h> 14 #include <linux/pci.h> 15 #include <linux/pci_ids.h> 16 #include <linux/edac.h> 17 #include "edac_core.h" 18 19 #define I82975X_REVISION " Ver: 1.0.0 " __DATE__ 20 #define EDAC_MOD_STR "i82975x_edac" 21 22 #define i82975x_printk(level, fmt, arg...) \ 23 edac_printk(level, "i82975x", fmt, ##arg) 24 25 #define i82975x_mc_printk(mci, level, fmt, arg...) \ 26 edac_mc_chipset_printk(mci, level, "i82975x", fmt, ##arg) 27 28 #ifndef PCI_DEVICE_ID_INTEL_82975_0 29 #define PCI_DEVICE_ID_INTEL_82975_0 0x277c 30 #endif /* PCI_DEVICE_ID_INTEL_82975_0 */ 31 32 #define I82975X_NR_CSROWS(nr_chans) (8/(nr_chans)) 33 34 /* Intel 82975X register addresses - device 0 function 0 - DRAM Controller */ 35 #define I82975X_EAP 0x58 /* Dram Error Address Pointer (32b) 36 * 37 * 31:7 128 byte cache-line address 38 * 6:1 reserved 39 * 0 0: CH0; 1: CH1 40 */ 41 42 #define I82975X_DERRSYN 0x5c /* Dram Error SYNdrome (8b) 43 * 44 * 7:0 DRAM ECC Syndrome 45 */ 46 47 #define I82975X_DES 0x5d /* Dram ERRor DeSTination (8b) 48 * 0h: Processor Memory Reads 49 * 1h:7h reserved 50 * More - See Page 65 of Intel DocSheet. 51 */ 52 53 #define I82975X_ERRSTS 0xc8 /* Error Status Register (16b) 54 * 55 * 15:12 reserved 56 * 11 Thermal Sensor Event 57 * 10 reserved 58 * 9 non-DRAM lock error (ndlock) 59 * 8 Refresh Timeout 60 * 7:2 reserved 61 * 1 ECC UE (multibit DRAM error) 62 * 0 ECC CE (singlebit DRAM error) 63 */ 64 65 /* Error Reporting is supported by 3 mechanisms: 66 1. DMI SERR generation ( ERRCMD ) 67 2. SMI DMI generation ( SMICMD ) 68 3. SCI DMI generation ( SCICMD ) 69 NOTE: Only ONE of the three must be enabled 70 */ 71 #define I82975X_ERRCMD 0xca /* Error Command (16b) 72 * 73 * 15:12 reserved 74 * 11 Thermal Sensor Event 75 * 10 reserved 76 * 9 non-DRAM lock error (ndlock) 77 * 8 Refresh Timeout 78 * 7:2 reserved 79 * 1 ECC UE (multibit DRAM error) 80 * 0 ECC CE (singlebit DRAM error) 81 */ 82 83 #define I82975X_SMICMD 0xcc /* Error Command (16b) 84 * 85 * 15:2 reserved 86 * 1 ECC UE (multibit DRAM error) 87 * 0 ECC CE (singlebit DRAM error) 88 */ 89 90 #define I82975X_SCICMD 0xce /* Error Command (16b) 91 * 92 * 15:2 reserved 93 * 1 ECC UE (multibit DRAM error) 94 * 0 ECC CE (singlebit DRAM error) 95 */ 96 97 #define I82975X_XEAP 0xfc /* Extended Dram Error Address Pointer (8b) 98 * 99 * 7:1 reserved 100 * 0 Bit32 of the Dram Error Address 101 */ 102 103 #define I82975X_MCHBAR 0x44 /* 104 * 105 * 31:14 Base Addr of 16K memory-mapped 106 * configuration space 107 * 13:1 reserverd 108 * 0 mem-mapped config space enable 109 */ 110 111 /* NOTE: Following addresses have to indexed using MCHBAR offset (44h, 32b) */ 112 /* Intel 82975x memory mapped register space */ 113 114 #define I82975X_DRB_SHIFT 25 /* fixed 32MiB grain */ 115 116 #define I82975X_DRB 0x100 /* DRAM Row Boundary (8b x 8) 117 * 118 * 7 set to 1 in highest DRB of 119 * channel if 4GB in ch. 120 * 6:2 upper boundary of rank in 121 * 32MB grains 122 * 1:0 set to 0 123 */ 124 #define I82975X_DRB_CH0R0 0x100 125 #define I82975X_DRB_CH0R1 0x101 126 #define I82975X_DRB_CH0R2 0x102 127 #define I82975X_DRB_CH0R3 0x103 128 #define I82975X_DRB_CH1R0 0x180 129 #define I82975X_DRB_CH1R1 0x181 130 #define I82975X_DRB_CH1R2 0x182 131 #define I82975X_DRB_CH1R3 0x183 132 133 134 #define I82975X_DRA 0x108 /* DRAM Row Attribute (4b x 8) 135 * defines the PAGE SIZE to be used 136 * for the rank 137 * 7 reserved 138 * 6:4 row attr of odd rank, i.e. 1 139 * 3 reserved 140 * 2:0 row attr of even rank, i.e. 0 141 * 142 * 000 = unpopulated 143 * 001 = reserved 144 * 010 = 4KiB 145 * 011 = 8KiB 146 * 100 = 16KiB 147 * others = reserved 148 */ 149 #define I82975X_DRA_CH0R01 0x108 150 #define I82975X_DRA_CH0R23 0x109 151 #define I82975X_DRA_CH1R01 0x188 152 #define I82975X_DRA_CH1R23 0x189 153 154 155 #define I82975X_BNKARC 0x10e /* Type of device in each rank - Bank Arch (16b) 156 * 157 * 15:8 reserved 158 * 7:6 Rank 3 architecture 159 * 5:4 Rank 2 architecture 160 * 3:2 Rank 1 architecture 161 * 1:0 Rank 0 architecture 162 * 163 * 00 => x16 devices; i.e 4 banks 164 * 01 => x8 devices; i.e 8 banks 165 */ 166 #define I82975X_C0BNKARC 0x10e 167 #define I82975X_C1BNKARC 0x18e 168 169 170 171 #define I82975X_DRC 0x120 /* DRAM Controller Mode0 (32b) 172 * 173 * 31:30 reserved 174 * 29 init complete 175 * 28:11 reserved, according to Intel 176 * 22:21 number of channels 177 * 00=1 01=2 in 82875 178 * seems to be ECC mode 179 * bits in 82975 in Asus 180 * P5W 181 * 19:18 Data Integ Mode 182 * 00=none 01=ECC in 82875 183 * 10:8 refresh mode 184 * 7 reserved 185 * 6:4 mode select 186 * 3:2 reserved 187 * 1:0 DRAM type 10=Second Revision 188 * DDR2 SDRAM 189 * 00, 01, 11 reserved 190 */ 191 #define I82975X_DRC_CH0M0 0x120 192 #define I82975X_DRC_CH1M0 0x1A0 193 194 195 #define I82975X_DRC_M1 0x124 /* DRAM Controller Mode1 (32b) 196 * 31 0=Standard Address Map 197 * 1=Enhanced Address Map 198 * 30:0 reserved 199 */ 200 201 #define I82975X_DRC_CH0M1 0x124 202 #define I82975X_DRC_CH1M1 0x1A4 203 204 enum i82975x_chips { 205 I82975X = 0, 206 }; 207 208 struct i82975x_pvt { 209 void __iomem *mch_window; 210 }; 211 212 struct i82975x_dev_info { 213 const char *ctl_name; 214 }; 215 216 struct i82975x_error_info { 217 u16 errsts; 218 u32 eap; 219 u8 des; 220 u8 derrsyn; 221 u16 errsts2; 222 u8 chan; /* the channel is bit 0 of EAP */ 223 u8 xeap; /* extended eap bit */ 224 }; 225 226 static const struct i82975x_dev_info i82975x_devs[] = { 227 [I82975X] = { 228 .ctl_name = "i82975x" 229 }, 230 }; 231 232 static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has 233 * already registered driver 234 */ 235 236 static int i82975x_registered = 1; 237 238 static void i82975x_get_error_info(struct mem_ctl_info *mci, 239 struct i82975x_error_info *info) 240 { 241 struct pci_dev *pdev; 242 243 pdev = to_pci_dev(mci->dev); 244 245 /* 246 * This is a mess because there is no atomic way to read all the 247 * registers at once and the registers can transition from CE being 248 * overwritten by UE. 249 */ 250 pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts); 251 pci_read_config_dword(pdev, I82975X_EAP, &info->eap); 252 pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap); 253 pci_read_config_byte(pdev, I82975X_DES, &info->des); 254 pci_read_config_byte(pdev, I82975X_DERRSYN, &info->derrsyn); 255 pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts2); 256 257 pci_write_bits16(pdev, I82975X_ERRSTS, 0x0003, 0x0003); 258 259 /* 260 * If the error is the same then we can for both reads then 261 * the first set of reads is valid. If there is a change then 262 * there is a CE no info and the second set of reads is valid 263 * and should be UE info. 264 */ 265 if (!(info->errsts2 & 0x0003)) 266 return; 267 268 if ((info->errsts ^ info->errsts2) & 0x0003) { 269 pci_read_config_dword(pdev, I82975X_EAP, &info->eap); 270 pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap); 271 pci_read_config_byte(pdev, I82975X_DES, &info->des); 272 pci_read_config_byte(pdev, I82975X_DERRSYN, 273 &info->derrsyn); 274 } 275 } 276 277 static int i82975x_process_error_info(struct mem_ctl_info *mci, 278 struct i82975x_error_info *info, int handle_errors) 279 { 280 int row, multi_chan, chan; 281 282 multi_chan = mci->csrows[0].nr_channels - 1; 283 284 if (!(info->errsts2 & 0x0003)) 285 return 0; 286 287 if (!handle_errors) 288 return 1; 289 290 if ((info->errsts ^ info->errsts2) & 0x0003) { 291 edac_mc_handle_ce_no_info(mci, "UE overwrote CE"); 292 info->errsts = info->errsts2; 293 } 294 295 chan = info->eap & 1; 296 info->eap >>= 1; 297 if (info->xeap ) 298 info->eap |= 0x80000000; 299 info->eap >>= PAGE_SHIFT; 300 row = edac_mc_find_csrow_by_page(mci, info->eap); 301 302 if (info->errsts & 0x0002) 303 edac_mc_handle_ue(mci, info->eap, 0, row, "i82975x UE"); 304 else 305 edac_mc_handle_ce(mci, info->eap, 0, info->derrsyn, row, 306 multi_chan ? chan : 0, 307 "i82975x CE"); 308 309 return 1; 310 } 311 312 static void i82975x_check(struct mem_ctl_info *mci) 313 { 314 struct i82975x_error_info info; 315 316 debugf1("MC%d: %s()\n", mci->mc_idx, __func__); 317 i82975x_get_error_info(mci, &info); 318 i82975x_process_error_info(mci, &info, 1); 319 } 320 321 /* Return 1 if dual channel mode is active. Else return 0. */ 322 static int dual_channel_active(void __iomem *mch_window) 323 { 324 /* 325 * We treat interleaved-symmetric configuration as dual-channel - EAP's 326 * bit-0 giving the channel of the error location. 327 * 328 * All other configurations are treated as single channel - the EAP's 329 * bit-0 will resolve ok in symmetric area of mixed 330 * (symmetric/asymmetric) configurations 331 */ 332 u8 drb[4][2]; 333 int row; 334 int dualch; 335 336 for (dualch = 1, row = 0; dualch && (row < 4); row++) { 337 drb[row][0] = readb(mch_window + I82975X_DRB + row); 338 drb[row][1] = readb(mch_window + I82975X_DRB + row + 0x80); 339 dualch = dualch && (drb[row][0] == drb[row][1]); 340 } 341 return dualch; 342 } 343 344 static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank) 345 { 346 /* 347 * ASUS P5W DH either does not program this register or programs 348 * it wrong! 349 * ECC is possible on i92975x ONLY with DEV_X8 which should mean 'val' 350 * for each rank should be 01b - the LSB of the word should be 0x55; 351 * but it reads 0! 352 */ 353 return DEV_X8; 354 } 355 356 static void i82975x_init_csrows(struct mem_ctl_info *mci, 357 struct pci_dev *pdev, void __iomem *mch_window) 358 { 359 struct csrow_info *csrow; 360 unsigned long last_cumul_size; 361 u8 value; 362 u32 cumul_size; 363 int index; 364 365 last_cumul_size = 0; 366 367 /* 368 * 82875 comment: 369 * The dram row boundary (DRB) reg values are boundary address 370 * for each DRAM row with a granularity of 32 or 64MB (single/dual 371 * channel operation). DRB regs are cumulative; therefore DRB7 will 372 * contain the total memory contained in all eight rows. 373 * 374 * FIXME: 375 * EDAC currently works for Dual-channel Interleaved configuration. 376 * Other configurations, which the chip supports, need fixing/testing. 377 * 378 */ 379 380 for (index = 0; index < mci->nr_csrows; index++) { 381 csrow = &mci->csrows[index]; 382 383 value = readb(mch_window + I82975X_DRB + index + 384 ((index >= 4) ? 0x80 : 0)); 385 cumul_size = value; 386 cumul_size <<= (I82975X_DRB_SHIFT - PAGE_SHIFT); 387 debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index, 388 cumul_size); 389 if (cumul_size == last_cumul_size) 390 continue; /* not populated */ 391 392 csrow->first_page = last_cumul_size; 393 csrow->last_page = cumul_size - 1; 394 csrow->nr_pages = cumul_size - last_cumul_size; 395 last_cumul_size = cumul_size; 396 csrow->grain = 1 << 7; /* I82975X_EAP has 128B resolution */ 397 csrow->mtype = MEM_DDR; /* i82975x supports only DDR2 */ 398 csrow->dtype = i82975x_dram_type(mch_window, index); 399 csrow->edac_mode = EDAC_SECDED; /* only supported */ 400 } 401 } 402 403 /* #define i82975x_DEBUG_IOMEM */ 404 405 #ifdef i82975x_DEBUG_IOMEM 406 static void i82975x_print_dram_timings(void __iomem *mch_window) 407 { 408 /* 409 * The register meanings are from Intel specs; 410 * (shows 13-5-5-5 for 800-DDR2) 411 * Asus P5W Bios reports 15-5-4-4 412 * What's your religion? 413 */ 414 static const int caslats[4] = { 5, 4, 3, 6 }; 415 u32 dtreg[2]; 416 417 dtreg[0] = readl(mch_window + 0x114); 418 dtreg[1] = readl(mch_window + 0x194); 419 i82975x_printk(KERN_INFO, "DRAM Timings : Ch0 Ch1\n" 420 " RAS Active Min = %d %d\n" 421 " CAS latency = %d %d\n" 422 " RAS to CAS = %d %d\n" 423 " RAS precharge = %d %d\n", 424 (dtreg[0] >> 19 ) & 0x0f, 425 (dtreg[1] >> 19) & 0x0f, 426 caslats[(dtreg[0] >> 8) & 0x03], 427 caslats[(dtreg[1] >> 8) & 0x03], 428 ((dtreg[0] >> 4) & 0x07) + 2, 429 ((dtreg[1] >> 4) & 0x07) + 2, 430 (dtreg[0] & 0x07) + 2, 431 (dtreg[1] & 0x07) + 2 432 ); 433 434 } 435 #endif 436 437 static int i82975x_probe1(struct pci_dev *pdev, int dev_idx) 438 { 439 int rc = -ENODEV; 440 struct mem_ctl_info *mci; 441 struct i82975x_pvt *pvt; 442 void __iomem *mch_window; 443 u32 mchbar; 444 u32 drc[2]; 445 struct i82975x_error_info discard; 446 int chans; 447 #ifdef i82975x_DEBUG_IOMEM 448 u8 c0drb[4]; 449 u8 c1drb[4]; 450 #endif 451 452 debugf0("%s()\n", __func__); 453 454 pci_read_config_dword(pdev, I82975X_MCHBAR, &mchbar); 455 if (!(mchbar & 1)) { 456 debugf3("%s(): failed, MCHBAR disabled!\n", __func__); 457 goto fail0; 458 } 459 mchbar &= 0xffffc000; /* bits 31:14 used for 16K window */ 460 mch_window = ioremap_nocache(mchbar, 0x1000); 461 462 #ifdef i82975x_DEBUG_IOMEM 463 i82975x_printk(KERN_INFO, "MCHBAR real = %0x, remapped = %p\n", 464 mchbar, mch_window); 465 466 c0drb[0] = readb(mch_window + I82975X_DRB_CH0R0); 467 c0drb[1] = readb(mch_window + I82975X_DRB_CH0R1); 468 c0drb[2] = readb(mch_window + I82975X_DRB_CH0R2); 469 c0drb[3] = readb(mch_window + I82975X_DRB_CH0R3); 470 c1drb[0] = readb(mch_window + I82975X_DRB_CH1R0); 471 c1drb[1] = readb(mch_window + I82975X_DRB_CH1R1); 472 c1drb[2] = readb(mch_window + I82975X_DRB_CH1R2); 473 c1drb[3] = readb(mch_window + I82975X_DRB_CH1R3); 474 i82975x_printk(KERN_INFO, "DRBCH0R0 = 0x%02x\n", c0drb[0]); 475 i82975x_printk(KERN_INFO, "DRBCH0R1 = 0x%02x\n", c0drb[1]); 476 i82975x_printk(KERN_INFO, "DRBCH0R2 = 0x%02x\n", c0drb[2]); 477 i82975x_printk(KERN_INFO, "DRBCH0R3 = 0x%02x\n", c0drb[3]); 478 i82975x_printk(KERN_INFO, "DRBCH1R0 = 0x%02x\n", c1drb[0]); 479 i82975x_printk(KERN_INFO, "DRBCH1R1 = 0x%02x\n", c1drb[1]); 480 i82975x_printk(KERN_INFO, "DRBCH1R2 = 0x%02x\n", c1drb[2]); 481 i82975x_printk(KERN_INFO, "DRBCH1R3 = 0x%02x\n", c1drb[3]); 482 #endif 483 484 drc[0] = readl(mch_window + I82975X_DRC_CH0M0); 485 drc[1] = readl(mch_window + I82975X_DRC_CH1M0); 486 #ifdef i82975x_DEBUG_IOMEM 487 i82975x_printk(KERN_INFO, "DRC_CH0 = %0x, %s\n", drc[0], 488 ((drc[0] >> 21) & 3) == 1 ? 489 "ECC enabled" : "ECC disabled"); 490 i82975x_printk(KERN_INFO, "DRC_CH1 = %0x, %s\n", drc[1], 491 ((drc[1] >> 21) & 3) == 1 ? 492 "ECC enabled" : "ECC disabled"); 493 494 i82975x_printk(KERN_INFO, "C0 BNKARC = %0x\n", 495 readw(mch_window + I82975X_C0BNKARC)); 496 i82975x_printk(KERN_INFO, "C1 BNKARC = %0x\n", 497 readw(mch_window + I82975X_C1BNKARC)); 498 i82975x_print_dram_timings(mch_window); 499 goto fail1; 500 #endif 501 if (!(((drc[0] >> 21) & 3) == 1 || ((drc[1] >> 21) & 3) == 1)) { 502 i82975x_printk(KERN_INFO, "ECC disabled on both channels.\n"); 503 goto fail1; 504 } 505 506 chans = dual_channel_active(mch_window) + 1; 507 508 /* assuming only one controller, index thus is 0 */ 509 mci = edac_mc_alloc(sizeof(*pvt), I82975X_NR_CSROWS(chans), 510 chans, 0); 511 if (!mci) { 512 rc = -ENOMEM; 513 goto fail1; 514 } 515 516 debugf3("%s(): init mci\n", __func__); 517 mci->dev = &pdev->dev; 518 mci->mtype_cap = MEM_FLAG_DDR; 519 mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; 520 mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; 521 mci->mod_name = EDAC_MOD_STR; 522 mci->mod_ver = I82975X_REVISION; 523 mci->ctl_name = i82975x_devs[dev_idx].ctl_name; 524 mci->edac_check = i82975x_check; 525 mci->ctl_page_to_phys = NULL; 526 debugf3("%s(): init pvt\n", __func__); 527 pvt = (struct i82975x_pvt *) mci->pvt_info; 528 pvt->mch_window = mch_window; 529 i82975x_init_csrows(mci, pdev, mch_window); 530 i82975x_get_error_info(mci, &discard); /* clear counters */ 531 532 /* finalize this instance of memory controller with edac core */ 533 if (edac_mc_add_mc(mci)) { 534 debugf3("%s(): failed edac_mc_add_mc()\n", __func__); 535 goto fail2; 536 } 537 538 /* get this far and it's successful */ 539 debugf3("%s(): success\n", __func__); 540 return 0; 541 542 fail2: 543 edac_mc_free(mci); 544 545 fail1: 546 iounmap(mch_window); 547 fail0: 548 return rc; 549 } 550 551 /* returns count (>= 0), or negative on error */ 552 static int __devinit i82975x_init_one(struct pci_dev *pdev, 553 const struct pci_device_id *ent) 554 { 555 int rc; 556 557 debugf0("%s()\n", __func__); 558 559 if (pci_enable_device(pdev) < 0) 560 return -EIO; 561 562 rc = i82975x_probe1(pdev, ent->driver_data); 563 564 if (mci_pdev == NULL) 565 mci_pdev = pci_dev_get(pdev); 566 567 return rc; 568 } 569 570 static void __devexit i82975x_remove_one(struct pci_dev *pdev) 571 { 572 struct mem_ctl_info *mci; 573 struct i82975x_pvt *pvt; 574 575 debugf0("%s()\n", __func__); 576 577 mci = edac_mc_del_mc(&pdev->dev); 578 if (mci == NULL) 579 return; 580 581 pvt = mci->pvt_info; 582 if (pvt->mch_window) 583 iounmap( pvt->mch_window ); 584 585 edac_mc_free(mci); 586 } 587 588 static const struct pci_device_id i82975x_pci_tbl[] __devinitdata = { 589 { 590 PCI_VEND_DEV(INTEL, 82975_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, 591 I82975X 592 }, 593 { 594 0, 595 } /* 0 terminated list. */ 596 }; 597 598 MODULE_DEVICE_TABLE(pci, i82975x_pci_tbl); 599 600 static struct pci_driver i82975x_driver = { 601 .name = EDAC_MOD_STR, 602 .probe = i82975x_init_one, 603 .remove = __devexit_p(i82975x_remove_one), 604 .id_table = i82975x_pci_tbl, 605 }; 606 607 static int __init i82975x_init(void) 608 { 609 int pci_rc; 610 611 debugf3("%s()\n", __func__); 612 613 /* Ensure that the OPSTATE is set correctly for POLL or NMI */ 614 opstate_init(); 615 616 pci_rc = pci_register_driver(&i82975x_driver); 617 if (pci_rc < 0) 618 goto fail0; 619 620 if (mci_pdev == NULL) { 621 mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 622 PCI_DEVICE_ID_INTEL_82975_0, NULL); 623 624 if (!mci_pdev) { 625 debugf0("i82975x pci_get_device fail\n"); 626 pci_rc = -ENODEV; 627 goto fail1; 628 } 629 630 pci_rc = i82975x_init_one(mci_pdev, i82975x_pci_tbl); 631 632 if (pci_rc < 0) { 633 debugf0("i82975x init fail\n"); 634 pci_rc = -ENODEV; 635 goto fail1; 636 } 637 } 638 639 return 0; 640 641 fail1: 642 pci_unregister_driver(&i82975x_driver); 643 644 fail0: 645 if (mci_pdev != NULL) 646 pci_dev_put(mci_pdev); 647 648 return pci_rc; 649 } 650 651 static void __exit i82975x_exit(void) 652 { 653 debugf3("%s()\n", __func__); 654 655 pci_unregister_driver(&i82975x_driver); 656 657 if (!i82975x_registered) { 658 i82975x_remove_one(mci_pdev); 659 pci_dev_put(mci_pdev); 660 } 661 } 662 663 module_init(i82975x_init); 664 module_exit(i82975x_exit); 665 666 MODULE_LICENSE("GPL"); 667 MODULE_AUTHOR("Arvind R. <arvind@acarlab.com>"); 668 MODULE_DESCRIPTION("MC support for Intel 82975 memory hub controllers"); 669 670 module_param(edac_op_state, int, 0444); 671 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); 672