1 /* 2 * Intel D82875P Memory Controller kernel module 3 * (C) 2003 Linux Networx (http://lnxi.com) 4 * This file may be distributed under the terms of the 5 * GNU General Public License. 6 * 7 * Written by Thayne Harbaugh 8 * Contributors: 9 * Wang Zhenyu at intel.com 10 * 11 * $Id: edac_i82875p.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $ 12 * 13 * Note: E7210 appears same as D82875P - zhenyu.z.wang at intel.com 14 */ 15 16 #include <linux/module.h> 17 #include <linux/init.h> 18 #include <linux/pci.h> 19 #include <linux/pci_ids.h> 20 #include <linux/edac.h> 21 #include "edac_module.h" 22 23 #define EDAC_MOD_STR "i82875p_edac" 24 25 #define i82875p_printk(level, fmt, arg...) \ 26 edac_printk(level, "i82875p", fmt, ##arg) 27 28 #define i82875p_mc_printk(mci, level, fmt, arg...) \ 29 edac_mc_chipset_printk(mci, level, "i82875p", fmt, ##arg) 30 31 #ifndef PCI_DEVICE_ID_INTEL_82875_0 32 #define PCI_DEVICE_ID_INTEL_82875_0 0x2578 33 #endif /* PCI_DEVICE_ID_INTEL_82875_0 */ 34 35 #ifndef PCI_DEVICE_ID_INTEL_82875_6 36 #define PCI_DEVICE_ID_INTEL_82875_6 0x257e 37 #endif /* PCI_DEVICE_ID_INTEL_82875_6 */ 38 39 /* four csrows in dual channel, eight in single channel */ 40 #define I82875P_NR_DIMMS 8 41 #define I82875P_NR_CSROWS(nr_chans) (I82875P_NR_DIMMS / (nr_chans)) 42 43 /* Intel 82875p register addresses - device 0 function 0 - DRAM Controller */ 44 #define I82875P_EAP 0x58 /* Error Address Pointer (32b) 45 * 46 * 31:12 block address 47 * 11:0 reserved 48 */ 49 50 #define I82875P_DERRSYN 0x5c /* DRAM Error Syndrome (8b) 51 * 52 * 7:0 DRAM ECC Syndrome 53 */ 54 55 #define I82875P_DES 0x5d /* DRAM Error Status (8b) 56 * 57 * 7:1 reserved 58 * 0 Error channel 0/1 59 */ 60 61 #define I82875P_ERRSTS 0xc8 /* Error Status Register (16b) 62 * 63 * 15:10 reserved 64 * 9 non-DRAM lock error (ndlock) 65 * 8 Sftwr Generated SMI 66 * 7 ECC UE 67 * 6 reserved 68 * 5 MCH detects unimplemented cycle 69 * 4 AGP access outside GA 70 * 3 Invalid AGP access 71 * 2 Invalid GA translation table 72 * 1 Unsupported AGP command 73 * 0 ECC CE 74 */ 75 76 #define I82875P_ERRCMD 0xca /* Error Command (16b) 77 * 78 * 15:10 reserved 79 * 9 SERR on non-DRAM lock 80 * 8 SERR on ECC UE 81 * 7 SERR on ECC CE 82 * 6 target abort on high exception 83 * 5 detect unimplemented cyc 84 * 4 AGP access outside of GA 85 * 3 SERR on invalid AGP access 86 * 2 invalid translation table 87 * 1 SERR on unsupported AGP command 88 * 0 reserved 89 */ 90 91 /* Intel 82875p register addresses - device 6 function 0 - DRAM Controller */ 92 #define I82875P_PCICMD6 0x04 /* PCI Command Register (16b) 93 * 94 * 15:10 reserved 95 * 9 fast back-to-back - ro 0 96 * 8 SERR enable - ro 0 97 * 7 addr/data stepping - ro 0 98 * 6 parity err enable - ro 0 99 * 5 VGA palette snoop - ro 0 100 * 4 mem wr & invalidate - ro 0 101 * 3 special cycle - ro 0 102 * 2 bus master - ro 0 103 * 1 mem access dev6 - 0(dis),1(en) 104 * 0 IO access dev3 - 0(dis),1(en) 105 */ 106 107 #define I82875P_BAR6 0x10 /* Mem Delays Base ADDR Reg (32b) 108 * 109 * 31:12 mem base addr [31:12] 110 * 11:4 address mask - ro 0 111 * 3 prefetchable - ro 0(non),1(pre) 112 * 2:1 mem type - ro 0 113 * 0 mem space - ro 0 114 */ 115 116 /* Intel 82875p MMIO register space - device 0 function 0 - MMR space */ 117 118 #define I82875P_DRB_SHIFT 26 /* 64MiB grain */ 119 #define I82875P_DRB 0x00 /* DRAM Row Boundary (8b x 8) 120 * 121 * 7 reserved 122 * 6:0 64MiB row boundary addr 123 */ 124 125 #define I82875P_DRA 0x10 /* DRAM Row Attribute (4b x 8) 126 * 127 * 7 reserved 128 * 6:4 row attr row 1 129 * 3 reserved 130 * 2:0 row attr row 0 131 * 132 * 000 = 4KiB 133 * 001 = 8KiB 134 * 010 = 16KiB 135 * 011 = 32KiB 136 */ 137 138 #define I82875P_DRC 0x68 /* DRAM Controller Mode (32b) 139 * 140 * 31:30 reserved 141 * 29 init complete 142 * 28:23 reserved 143 * 22:21 nr chan 00=1,01=2 144 * 20 reserved 145 * 19:18 Data Integ Mode 00=none,01=ecc 146 * 17:11 reserved 147 * 10:8 refresh mode 148 * 7 reserved 149 * 6:4 mode select 150 * 3:2 reserved 151 * 1:0 DRAM type 01=DDR 152 */ 153 154 enum i82875p_chips { 155 I82875P = 0, 156 }; 157 158 struct i82875p_pvt { 159 struct pci_dev *ovrfl_pdev; 160 void __iomem *ovrfl_window; 161 }; 162 163 struct i82875p_dev_info { 164 const char *ctl_name; 165 }; 166 167 struct i82875p_error_info { 168 u16 errsts; 169 u32 eap; 170 u8 des; 171 u8 derrsyn; 172 u16 errsts2; 173 }; 174 175 static const struct i82875p_dev_info i82875p_devs[] = { 176 [I82875P] = { 177 .ctl_name = "i82875p"}, 178 }; 179 180 static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has 181 * already registered driver 182 */ 183 184 static struct edac_pci_ctl_info *i82875p_pci; 185 186 static void i82875p_get_error_info(struct mem_ctl_info *mci, 187 struct i82875p_error_info *info) 188 { 189 struct pci_dev *pdev; 190 191 pdev = to_pci_dev(mci->pdev); 192 193 /* 194 * This is a mess because there is no atomic way to read all the 195 * registers at once and the registers can transition from CE being 196 * overwritten by UE. 197 */ 198 pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts); 199 200 if (!(info->errsts & 0x0081)) 201 return; 202 203 pci_read_config_dword(pdev, I82875P_EAP, &info->eap); 204 pci_read_config_byte(pdev, I82875P_DES, &info->des); 205 pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn); 206 pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts2); 207 208 /* 209 * If the error is the same then we can for both reads then 210 * the first set of reads is valid. If there is a change then 211 * there is a CE no info and the second set of reads is valid 212 * and should be UE info. 213 */ 214 if ((info->errsts ^ info->errsts2) & 0x0081) { 215 pci_read_config_dword(pdev, I82875P_EAP, &info->eap); 216 pci_read_config_byte(pdev, I82875P_DES, &info->des); 217 pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn); 218 } 219 220 pci_write_bits16(pdev, I82875P_ERRSTS, 0x0081, 0x0081); 221 } 222 223 static int i82875p_process_error_info(struct mem_ctl_info *mci, 224 struct i82875p_error_info *info, 225 int handle_errors) 226 { 227 int row, multi_chan; 228 229 multi_chan = mci->csrows[0]->nr_channels - 1; 230 231 if (!(info->errsts & 0x0081)) 232 return 0; 233 234 if (!handle_errors) 235 return 1; 236 237 if ((info->errsts ^ info->errsts2) & 0x0081) { 238 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, 239 -1, -1, -1, 240 "UE overwrote CE", ""); 241 info->errsts = info->errsts2; 242 } 243 244 info->eap >>= PAGE_SHIFT; 245 row = edac_mc_find_csrow_by_page(mci, info->eap); 246 247 if (info->errsts & 0x0080) 248 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 249 info->eap, 0, 0, 250 row, -1, -1, 251 "i82875p UE", ""); 252 else 253 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 254 info->eap, 0, info->derrsyn, 255 row, multi_chan ? (info->des & 0x1) : 0, 256 -1, "i82875p CE", ""); 257 258 return 1; 259 } 260 261 static void i82875p_check(struct mem_ctl_info *mci) 262 { 263 struct i82875p_error_info info; 264 265 edac_dbg(1, "MC%d\n", mci->mc_idx); 266 i82875p_get_error_info(mci, &info); 267 i82875p_process_error_info(mci, &info, 1); 268 } 269 270 /* Return 0 on success or 1 on failure. */ 271 static int i82875p_setup_overfl_dev(struct pci_dev *pdev, 272 struct pci_dev **ovrfl_pdev, 273 void __iomem **ovrfl_window) 274 { 275 struct pci_dev *dev; 276 void __iomem *window; 277 278 *ovrfl_pdev = NULL; 279 *ovrfl_window = NULL; 280 dev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL); 281 282 if (dev == NULL) { 283 /* Intel tells BIOS developers to hide device 6 which 284 * configures the overflow device access containing 285 * the DRBs - this is where we expose device 6. 286 * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm 287 */ 288 pci_write_bits8(pdev, 0xf4, 0x2, 0x2); 289 dev = pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0)); 290 291 if (dev == NULL) 292 return 1; 293 294 pci_bus_assign_resources(dev->bus); 295 pci_bus_add_device(dev); 296 } 297 298 *ovrfl_pdev = dev; 299 300 if (pci_enable_device(dev)) { 301 i82875p_printk(KERN_ERR, "%s(): Failed to enable overflow " 302 "device\n", __func__); 303 return 1; 304 } 305 306 if (pci_request_regions(dev, pci_name(dev))) { 307 #ifdef CORRECT_BIOS 308 goto fail0; 309 #endif 310 } 311 312 /* cache is irrelevant for PCI bus reads/writes */ 313 window = pci_ioremap_bar(dev, 0); 314 if (window == NULL) { 315 i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n", 316 __func__); 317 goto fail1; 318 } 319 320 *ovrfl_window = window; 321 return 0; 322 323 fail1: 324 pci_release_regions(dev); 325 326 #ifdef CORRECT_BIOS 327 fail0: 328 pci_disable_device(dev); 329 #endif 330 /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */ 331 return 1; 332 } 333 334 /* Return 1 if dual channel mode is active. Else return 0. */ 335 static inline int dual_channel_active(u32 drc) 336 { 337 return (drc >> 21) & 0x1; 338 } 339 340 static void i82875p_init_csrows(struct mem_ctl_info *mci, 341 struct pci_dev *pdev, 342 void __iomem * ovrfl_window, u32 drc) 343 { 344 struct csrow_info *csrow; 345 struct dimm_info *dimm; 346 unsigned nr_chans = dual_channel_active(drc) + 1; 347 unsigned long last_cumul_size; 348 u8 value; 349 u32 drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */ 350 u32 cumul_size, nr_pages; 351 int index, j; 352 353 drc_ddim = (drc >> 18) & 0x1; 354 last_cumul_size = 0; 355 356 /* The dram row boundary (DRB) reg values are boundary address 357 * for each DRAM row with a granularity of 32 or 64MB (single/dual 358 * channel operation). DRB regs are cumulative; therefore DRB7 will 359 * contain the total memory contained in all eight rows. 360 */ 361 362 for (index = 0; index < mci->nr_csrows; index++) { 363 csrow = mci->csrows[index]; 364 365 value = readb(ovrfl_window + I82875P_DRB + index); 366 cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT); 367 edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size); 368 if (cumul_size == last_cumul_size) 369 continue; /* not populated */ 370 371 csrow->first_page = last_cumul_size; 372 csrow->last_page = cumul_size - 1; 373 nr_pages = cumul_size - last_cumul_size; 374 last_cumul_size = cumul_size; 375 376 for (j = 0; j < nr_chans; j++) { 377 dimm = csrow->channels[j]->dimm; 378 379 dimm->nr_pages = nr_pages / nr_chans; 380 dimm->grain = 1 << 12; /* I82875P_EAP has 4KiB reolution */ 381 dimm->mtype = MEM_DDR; 382 dimm->dtype = DEV_UNKNOWN; 383 dimm->edac_mode = drc_ddim ? EDAC_SECDED : EDAC_NONE; 384 } 385 } 386 } 387 388 static int i82875p_probe1(struct pci_dev *pdev, int dev_idx) 389 { 390 int rc = -ENODEV; 391 struct mem_ctl_info *mci; 392 struct edac_mc_layer layers[2]; 393 struct i82875p_pvt *pvt; 394 struct pci_dev *ovrfl_pdev; 395 void __iomem *ovrfl_window; 396 u32 drc; 397 u32 nr_chans; 398 struct i82875p_error_info discard; 399 400 edac_dbg(0, "\n"); 401 402 if (i82875p_setup_overfl_dev(pdev, &ovrfl_pdev, &ovrfl_window)) 403 return -ENODEV; 404 drc = readl(ovrfl_window + I82875P_DRC); 405 nr_chans = dual_channel_active(drc) + 1; 406 407 layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; 408 layers[0].size = I82875P_NR_CSROWS(nr_chans); 409 layers[0].is_virt_csrow = true; 410 layers[1].type = EDAC_MC_LAYER_CHANNEL; 411 layers[1].size = nr_chans; 412 layers[1].is_virt_csrow = false; 413 mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); 414 if (!mci) { 415 rc = -ENOMEM; 416 goto fail0; 417 } 418 419 edac_dbg(3, "init mci\n"); 420 mci->pdev = &pdev->dev; 421 mci->mtype_cap = MEM_FLAG_DDR; 422 mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; 423 mci->edac_cap = EDAC_FLAG_UNKNOWN; 424 mci->mod_name = EDAC_MOD_STR; 425 mci->ctl_name = i82875p_devs[dev_idx].ctl_name; 426 mci->dev_name = pci_name(pdev); 427 mci->edac_check = i82875p_check; 428 mci->ctl_page_to_phys = NULL; 429 edac_dbg(3, "init pvt\n"); 430 pvt = (struct i82875p_pvt *)mci->pvt_info; 431 pvt->ovrfl_pdev = ovrfl_pdev; 432 pvt->ovrfl_window = ovrfl_window; 433 i82875p_init_csrows(mci, pdev, ovrfl_window, drc); 434 i82875p_get_error_info(mci, &discard); /* clear counters */ 435 436 /* Here we assume that we will never see multiple instances of this 437 * type of memory controller. The ID is therefore hardcoded to 0. 438 */ 439 if (edac_mc_add_mc(mci)) { 440 edac_dbg(3, "failed edac_mc_add_mc()\n"); 441 goto fail1; 442 } 443 444 /* allocating generic PCI control info */ 445 i82875p_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); 446 if (!i82875p_pci) { 447 printk(KERN_WARNING 448 "%s(): Unable to create PCI control\n", 449 __func__); 450 printk(KERN_WARNING 451 "%s(): PCI error report via EDAC not setup\n", 452 __func__); 453 } 454 455 /* get this far and it's successful */ 456 edac_dbg(3, "success\n"); 457 return 0; 458 459 fail1: 460 edac_mc_free(mci); 461 462 fail0: 463 iounmap(ovrfl_window); 464 pci_release_regions(ovrfl_pdev); 465 466 pci_disable_device(ovrfl_pdev); 467 /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */ 468 return rc; 469 } 470 471 /* returns count (>= 0), or negative on error */ 472 static int i82875p_init_one(struct pci_dev *pdev, 473 const struct pci_device_id *ent) 474 { 475 int rc; 476 477 edac_dbg(0, "\n"); 478 i82875p_printk(KERN_INFO, "i82875p init one\n"); 479 480 if (pci_enable_device(pdev) < 0) 481 return -EIO; 482 483 rc = i82875p_probe1(pdev, ent->driver_data); 484 485 if (mci_pdev == NULL) 486 mci_pdev = pci_dev_get(pdev); 487 488 return rc; 489 } 490 491 static void i82875p_remove_one(struct pci_dev *pdev) 492 { 493 struct mem_ctl_info *mci; 494 struct i82875p_pvt *pvt = NULL; 495 496 edac_dbg(0, "\n"); 497 498 if (i82875p_pci) 499 edac_pci_release_generic_ctl(i82875p_pci); 500 501 if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL) 502 return; 503 504 pvt = (struct i82875p_pvt *)mci->pvt_info; 505 506 if (pvt->ovrfl_window) 507 iounmap(pvt->ovrfl_window); 508 509 if (pvt->ovrfl_pdev) { 510 #ifdef CORRECT_BIOS 511 pci_release_regions(pvt->ovrfl_pdev); 512 #endif /*CORRECT_BIOS */ 513 pci_disable_device(pvt->ovrfl_pdev); 514 pci_dev_put(pvt->ovrfl_pdev); 515 } 516 517 edac_mc_free(mci); 518 } 519 520 static const struct pci_device_id i82875p_pci_tbl[] = { 521 { 522 PCI_VEND_DEV(INTEL, 82875_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, 523 I82875P}, 524 { 525 0, 526 } /* 0 terminated list. */ 527 }; 528 529 MODULE_DEVICE_TABLE(pci, i82875p_pci_tbl); 530 531 static struct pci_driver i82875p_driver = { 532 .name = EDAC_MOD_STR, 533 .probe = i82875p_init_one, 534 .remove = i82875p_remove_one, 535 .id_table = i82875p_pci_tbl, 536 }; 537 538 static int __init i82875p_init(void) 539 { 540 int pci_rc; 541 542 edac_dbg(3, "\n"); 543 544 /* Ensure that the OPSTATE is set correctly for POLL or NMI */ 545 opstate_init(); 546 547 pci_rc = pci_register_driver(&i82875p_driver); 548 549 if (pci_rc < 0) 550 goto fail0; 551 552 if (mci_pdev == NULL) { 553 mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 554 PCI_DEVICE_ID_INTEL_82875_0, NULL); 555 556 if (!mci_pdev) { 557 edac_dbg(0, "875p pci_get_device fail\n"); 558 pci_rc = -ENODEV; 559 goto fail1; 560 } 561 562 pci_rc = i82875p_init_one(mci_pdev, i82875p_pci_tbl); 563 564 if (pci_rc < 0) { 565 edac_dbg(0, "875p init fail\n"); 566 pci_rc = -ENODEV; 567 goto fail1; 568 } 569 } 570 571 return 0; 572 573 fail1: 574 pci_unregister_driver(&i82875p_driver); 575 576 fail0: 577 pci_dev_put(mci_pdev); 578 return pci_rc; 579 } 580 581 static void __exit i82875p_exit(void) 582 { 583 edac_dbg(3, "\n"); 584 585 i82875p_remove_one(mci_pdev); 586 pci_dev_put(mci_pdev); 587 588 pci_unregister_driver(&i82875p_driver); 589 590 } 591 592 module_init(i82875p_init); 593 module_exit(i82875p_exit); 594 595 MODULE_LICENSE("GPL"); 596 MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh"); 597 MODULE_DESCRIPTION("MC support for Intel 82875 memory hub controllers"); 598 599 module_param(edac_op_state, int, 0444); 600 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); 601