1 /* 2 * Intel 5400 class Memory Controllers kernel module (Seaburg) 3 * 4 * This file may be distributed under the terms of the 5 * GNU General Public License. 6 * 7 * Copyright (c) 2008 by: 8 * Ben Woodard <woodard@redhat.com> 9 * Mauro Carvalho Chehab 10 * 11 * Red Hat Inc. http://www.redhat.com 12 * 13 * Forked and adapted from the i5000_edac driver which was 14 * written by Douglas Thompson Linux Networx <norsk5@xmission.com> 15 * 16 * This module is based on the following document: 17 * 18 * Intel 5400 Chipset Memory Controller Hub (MCH) - Datasheet 19 * http://developer.intel.com/design/chipsets/datashts/313070.htm 20 * 21 * This Memory Controller manages DDR2 FB-DIMMs. It has 2 branches, each with 22 * 2 channels operating in lockstep no-mirror mode. Each channel can have up to 23 * 4 dimm's, each with up to 8GB. 24 * 25 */ 26 27 #include <linux/module.h> 28 #include <linux/init.h> 29 #include <linux/pci.h> 30 #include <linux/pci_ids.h> 31 #include <linux/slab.h> 32 #include <linux/edac.h> 33 #include <linux/mmzone.h> 34 35 #include "edac_module.h" 36 37 /* 38 * Alter this version for the I5400 module when modifications are made 39 */ 40 #define I5400_REVISION " Ver: 1.0.0" 41 42 #define EDAC_MOD_STR "i5400_edac" 43 44 #define i5400_printk(level, fmt, arg...) \ 45 edac_printk(level, "i5400", fmt, ##arg) 46 47 #define i5400_mc_printk(mci, level, fmt, arg...) \ 48 edac_mc_chipset_printk(mci, level, "i5400", fmt, ##arg) 49 50 /* Limits for i5400 */ 51 #define MAX_BRANCHES 2 52 #define CHANNELS_PER_BRANCH 2 53 #define DIMMS_PER_CHANNEL 4 54 #define MAX_CHANNELS (MAX_BRANCHES * CHANNELS_PER_BRANCH) 55 56 /* Device 16, 57 * Function 0: System Address 58 * Function 1: Memory Branch Map, Control, Errors Register 59 * Function 2: FSB Error Registers 60 * 61 * All 3 functions of Device 16 (0,1,2) share the SAME DID and 62 * uses PCI_DEVICE_ID_INTEL_5400_ERR for device 16 (0,1,2), 63 * PCI_DEVICE_ID_INTEL_5400_FBD0 and PCI_DEVICE_ID_INTEL_5400_FBD1 64 * for device 21 (0,1). 65 */ 66 67 /* OFFSETS for Function 0 */ 68 #define AMBASE 0x48 /* AMB Mem Mapped Reg Region Base */ 69 #define MAXCH 0x56 /* Max Channel Number */ 70 #define MAXDIMMPERCH 0x57 /* Max DIMM PER Channel Number */ 71 72 /* OFFSETS for Function 1 */ 73 #define TOLM 0x6C 74 #define REDMEMB 0x7C 75 #define REC_ECC_LOCATOR_ODD(x) ((x) & 0x3fe00) /* bits [17:9] indicate ODD, [8:0] indicate EVEN */ 76 #define MIR0 0x80 77 #define MIR1 0x84 78 #define AMIR0 0x8c 79 #define AMIR1 0x90 80 81 /* Fatal error registers */ 82 #define FERR_FAT_FBD 0x98 /* also called as FERR_FAT_FB_DIMM at datasheet */ 83 #define FERR_FAT_FBDCHAN (3<<28) /* channel index where the highest-order error occurred */ 84 85 #define NERR_FAT_FBD 0x9c 86 #define FERR_NF_FBD 0xa0 /* also called as FERR_NFAT_FB_DIMM at datasheet */ 87 88 /* Non-fatal error register */ 89 #define NERR_NF_FBD 0xa4 90 91 /* Enable error mask */ 92 #define EMASK_FBD 0xa8 93 94 #define ERR0_FBD 0xac 95 #define ERR1_FBD 0xb0 96 #define ERR2_FBD 0xb4 97 #define MCERR_FBD 0xb8 98 99 /* No OFFSETS for Device 16 Function 2 */ 100 101 /* 102 * Device 21, 103 * Function 0: Memory Map Branch 0 104 * 105 * Device 22, 106 * Function 0: Memory Map Branch 1 107 */ 108 109 /* OFFSETS for Function 0 */ 110 #define AMBPRESENT_0 0x64 111 #define AMBPRESENT_1 0x66 112 #define MTR0 0x80 113 #define MTR1 0x82 114 #define MTR2 0x84 115 #define MTR3 0x86 116 117 /* OFFSETS for Function 1 */ 118 #define NRECFGLOG 0x74 119 #define RECFGLOG 0x78 120 #define NRECMEMA 0xbe 121 #define NRECMEMB 0xc0 122 #define NRECFB_DIMMA 0xc4 123 #define NRECFB_DIMMB 0xc8 124 #define NRECFB_DIMMC 0xcc 125 #define NRECFB_DIMMD 0xd0 126 #define NRECFB_DIMME 0xd4 127 #define NRECFB_DIMMF 0xd8 128 #define REDMEMA 0xdC 129 #define RECMEMA 0xf0 130 #define RECMEMB 0xf4 131 #define RECFB_DIMMA 0xf8 132 #define RECFB_DIMMB 0xec 133 #define RECFB_DIMMC 0xf0 134 #define RECFB_DIMMD 0xf4 135 #define RECFB_DIMME 0xf8 136 #define RECFB_DIMMF 0xfC 137 138 /* 139 * Error indicator bits and masks 140 * Error masks are according with Table 5-17 of i5400 datasheet 141 */ 142 143 enum error_mask { 144 EMASK_M1 = 1<<0, /* Memory Write error on non-redundant retry */ 145 EMASK_M2 = 1<<1, /* Memory or FB-DIMM configuration CRC read error */ 146 EMASK_M3 = 1<<2, /* Reserved */ 147 EMASK_M4 = 1<<3, /* Uncorrectable Data ECC on Replay */ 148 EMASK_M5 = 1<<4, /* Aliased Uncorrectable Non-Mirrored Demand Data ECC */ 149 EMASK_M6 = 1<<5, /* Unsupported on i5400 */ 150 EMASK_M7 = 1<<6, /* Aliased Uncorrectable Resilver- or Spare-Copy Data ECC */ 151 EMASK_M8 = 1<<7, /* Aliased Uncorrectable Patrol Data ECC */ 152 EMASK_M9 = 1<<8, /* Non-Aliased Uncorrectable Non-Mirrored Demand Data ECC */ 153 EMASK_M10 = 1<<9, /* Unsupported on i5400 */ 154 EMASK_M11 = 1<<10, /* Non-Aliased Uncorrectable Resilver- or Spare-Copy Data ECC */ 155 EMASK_M12 = 1<<11, /* Non-Aliased Uncorrectable Patrol Data ECC */ 156 EMASK_M13 = 1<<12, /* Memory Write error on first attempt */ 157 EMASK_M14 = 1<<13, /* FB-DIMM Configuration Write error on first attempt */ 158 EMASK_M15 = 1<<14, /* Memory or FB-DIMM configuration CRC read error */ 159 EMASK_M16 = 1<<15, /* Channel Failed-Over Occurred */ 160 EMASK_M17 = 1<<16, /* Correctable Non-Mirrored Demand Data ECC */ 161 EMASK_M18 = 1<<17, /* Unsupported on i5400 */ 162 EMASK_M19 = 1<<18, /* Correctable Resilver- or Spare-Copy Data ECC */ 163 EMASK_M20 = 1<<19, /* Correctable Patrol Data ECC */ 164 EMASK_M21 = 1<<20, /* FB-DIMM Northbound parity error on FB-DIMM Sync Status */ 165 EMASK_M22 = 1<<21, /* SPD protocol Error */ 166 EMASK_M23 = 1<<22, /* Non-Redundant Fast Reset Timeout */ 167 EMASK_M24 = 1<<23, /* Refresh error */ 168 EMASK_M25 = 1<<24, /* Memory Write error on redundant retry */ 169 EMASK_M26 = 1<<25, /* Redundant Fast Reset Timeout */ 170 EMASK_M27 = 1<<26, /* Correctable Counter Threshold Exceeded */ 171 EMASK_M28 = 1<<27, /* DIMM-Spare Copy Completed */ 172 EMASK_M29 = 1<<28, /* DIMM-Isolation Completed */ 173 }; 174 175 /* 176 * Names to translate bit error into something useful 177 */ 178 static const char *error_name[] = { 179 [0] = "Memory Write error on non-redundant retry", 180 [1] = "Memory or FB-DIMM configuration CRC read error", 181 /* Reserved */ 182 [3] = "Uncorrectable Data ECC on Replay", 183 [4] = "Aliased Uncorrectable Non-Mirrored Demand Data ECC", 184 /* M6 Unsupported on i5400 */ 185 [6] = "Aliased Uncorrectable Resilver- or Spare-Copy Data ECC", 186 [7] = "Aliased Uncorrectable Patrol Data ECC", 187 [8] = "Non-Aliased Uncorrectable Non-Mirrored Demand Data ECC", 188 /* M10 Unsupported on i5400 */ 189 [10] = "Non-Aliased Uncorrectable Resilver- or Spare-Copy Data ECC", 190 [11] = "Non-Aliased Uncorrectable Patrol Data ECC", 191 [12] = "Memory Write error on first attempt", 192 [13] = "FB-DIMM Configuration Write error on first attempt", 193 [14] = "Memory or FB-DIMM configuration CRC read error", 194 [15] = "Channel Failed-Over Occurred", 195 [16] = "Correctable Non-Mirrored Demand Data ECC", 196 /* M18 Unsupported on i5400 */ 197 [18] = "Correctable Resilver- or Spare-Copy Data ECC", 198 [19] = "Correctable Patrol Data ECC", 199 [20] = "FB-DIMM Northbound parity error on FB-DIMM Sync Status", 200 [21] = "SPD protocol Error", 201 [22] = "Non-Redundant Fast Reset Timeout", 202 [23] = "Refresh error", 203 [24] = "Memory Write error on redundant retry", 204 [25] = "Redundant Fast Reset Timeout", 205 [26] = "Correctable Counter Threshold Exceeded", 206 [27] = "DIMM-Spare Copy Completed", 207 [28] = "DIMM-Isolation Completed", 208 }; 209 210 /* Fatal errors */ 211 #define ERROR_FAT_MASK (EMASK_M1 | \ 212 EMASK_M2 | \ 213 EMASK_M23) 214 215 /* Correctable errors */ 216 #define ERROR_NF_CORRECTABLE (EMASK_M27 | \ 217 EMASK_M20 | \ 218 EMASK_M19 | \ 219 EMASK_M18 | \ 220 EMASK_M17 | \ 221 EMASK_M16) 222 #define ERROR_NF_DIMM_SPARE (EMASK_M29 | \ 223 EMASK_M28) 224 #define ERROR_NF_SPD_PROTOCOL (EMASK_M22) 225 #define ERROR_NF_NORTH_CRC (EMASK_M21) 226 227 /* Recoverable errors */ 228 #define ERROR_NF_RECOVERABLE (EMASK_M26 | \ 229 EMASK_M25 | \ 230 EMASK_M24 | \ 231 EMASK_M15 | \ 232 EMASK_M14 | \ 233 EMASK_M13 | \ 234 EMASK_M12 | \ 235 EMASK_M11 | \ 236 EMASK_M9 | \ 237 EMASK_M8 | \ 238 EMASK_M7 | \ 239 EMASK_M5) 240 241 /* uncorrectable errors */ 242 #define ERROR_NF_UNCORRECTABLE (EMASK_M4) 243 244 /* mask to all non-fatal errors */ 245 #define ERROR_NF_MASK (ERROR_NF_CORRECTABLE | \ 246 ERROR_NF_UNCORRECTABLE | \ 247 ERROR_NF_RECOVERABLE | \ 248 ERROR_NF_DIMM_SPARE | \ 249 ERROR_NF_SPD_PROTOCOL | \ 250 ERROR_NF_NORTH_CRC) 251 252 /* 253 * Define error masks for the several registers 254 */ 255 256 /* Enable all fatal and non fatal errors */ 257 #define ENABLE_EMASK_ALL (ERROR_FAT_MASK | ERROR_NF_MASK) 258 259 /* mask for fatal error registers */ 260 #define FERR_FAT_MASK ERROR_FAT_MASK 261 262 /* masks for non-fatal error register */ 263 static inline int to_nf_mask(unsigned int mask) 264 { 265 return (mask & EMASK_M29) | (mask >> 3); 266 }; 267 268 static inline int from_nf_ferr(unsigned int mask) 269 { 270 return (mask & EMASK_M29) | /* Bit 28 */ 271 (mask & ((1 << 28) - 1) << 3); /* Bits 0 to 27 */ 272 }; 273 274 #define FERR_NF_MASK to_nf_mask(ERROR_NF_MASK) 275 #define FERR_NF_CORRECTABLE to_nf_mask(ERROR_NF_CORRECTABLE) 276 #define FERR_NF_DIMM_SPARE to_nf_mask(ERROR_NF_DIMM_SPARE) 277 #define FERR_NF_SPD_PROTOCOL to_nf_mask(ERROR_NF_SPD_PROTOCOL) 278 #define FERR_NF_NORTH_CRC to_nf_mask(ERROR_NF_NORTH_CRC) 279 #define FERR_NF_RECOVERABLE to_nf_mask(ERROR_NF_RECOVERABLE) 280 #define FERR_NF_UNCORRECTABLE to_nf_mask(ERROR_NF_UNCORRECTABLE) 281 282 /* Defines to extract the vaious fields from the 283 * MTRx - Memory Technology Registers 284 */ 285 #define MTR_DIMMS_PRESENT(mtr) ((mtr) & (1 << 10)) 286 #define MTR_DIMMS_ETHROTTLE(mtr) ((mtr) & (1 << 9)) 287 #define MTR_DRAM_WIDTH(mtr) (((mtr) & (1 << 8)) ? 8 : 4) 288 #define MTR_DRAM_BANKS(mtr) (((mtr) & (1 << 6)) ? 8 : 4) 289 #define MTR_DRAM_BANKS_ADDR_BITS(mtr) ((MTR_DRAM_BANKS(mtr) == 8) ? 3 : 2) 290 #define MTR_DIMM_RANK(mtr) (((mtr) >> 5) & 0x1) 291 #define MTR_DIMM_RANK_ADDR_BITS(mtr) (MTR_DIMM_RANK(mtr) ? 2 : 1) 292 #define MTR_DIMM_ROWS(mtr) (((mtr) >> 2) & 0x3) 293 #define MTR_DIMM_ROWS_ADDR_BITS(mtr) (MTR_DIMM_ROWS(mtr) + 13) 294 #define MTR_DIMM_COLS(mtr) ((mtr) & 0x3) 295 #define MTR_DIMM_COLS_ADDR_BITS(mtr) (MTR_DIMM_COLS(mtr) + 10) 296 297 /* This applies to FERR_NF_FB-DIMM as well as FERR_FAT_FB-DIMM */ 298 static inline int extract_fbdchan_indx(u32 x) 299 { 300 return (x>>28) & 0x3; 301 } 302 303 /* Device name and register DID (Device ID) */ 304 struct i5400_dev_info { 305 const char *ctl_name; /* name for this device */ 306 u16 fsb_mapping_errors; /* DID for the branchmap,control */ 307 }; 308 309 /* Table of devices attributes supported by this driver */ 310 static const struct i5400_dev_info i5400_devs[] = { 311 { 312 .ctl_name = "I5400", 313 .fsb_mapping_errors = PCI_DEVICE_ID_INTEL_5400_ERR, 314 }, 315 }; 316 317 struct i5400_dimm_info { 318 int megabytes; /* size, 0 means not present */ 319 }; 320 321 /* driver private data structure */ 322 struct i5400_pvt { 323 struct pci_dev *system_address; /* 16.0 */ 324 struct pci_dev *branchmap_werrors; /* 16.1 */ 325 struct pci_dev *fsb_error_regs; /* 16.2 */ 326 struct pci_dev *branch_0; /* 21.0 */ 327 struct pci_dev *branch_1; /* 22.0 */ 328 329 u16 tolm; /* top of low memory */ 330 union { 331 u64 ambase; /* AMB BAR */ 332 struct { 333 u32 ambase_bottom; 334 u32 ambase_top; 335 } u __packed; 336 }; 337 338 u16 mir0, mir1; 339 340 u16 b0_mtr[DIMMS_PER_CHANNEL]; /* Memory Technlogy Reg */ 341 u16 b0_ambpresent0; /* Branch 0, Channel 0 */ 342 u16 b0_ambpresent1; /* Brnach 0, Channel 1 */ 343 344 u16 b1_mtr[DIMMS_PER_CHANNEL]; /* Memory Technlogy Reg */ 345 u16 b1_ambpresent0; /* Branch 1, Channel 8 */ 346 u16 b1_ambpresent1; /* Branch 1, Channel 1 */ 347 348 /* DIMM information matrix, allocating architecture maximums */ 349 struct i5400_dimm_info dimm_info[DIMMS_PER_CHANNEL][MAX_CHANNELS]; 350 351 /* Actual values for this controller */ 352 int maxch; /* Max channels */ 353 int maxdimmperch; /* Max DIMMs per channel */ 354 }; 355 356 /* I5400 MCH error information retrieved from Hardware */ 357 struct i5400_error_info { 358 /* These registers are always read from the MC */ 359 u32 ferr_fat_fbd; /* First Errors Fatal */ 360 u32 nerr_fat_fbd; /* Next Errors Fatal */ 361 u32 ferr_nf_fbd; /* First Errors Non-Fatal */ 362 u32 nerr_nf_fbd; /* Next Errors Non-Fatal */ 363 364 /* These registers are input ONLY if there was a Recoverable Error */ 365 u32 redmemb; /* Recoverable Mem Data Error log B */ 366 u16 recmema; /* Recoverable Mem Error log A */ 367 u32 recmemb; /* Recoverable Mem Error log B */ 368 369 /* These registers are input ONLY if there was a Non-Rec Error */ 370 u16 nrecmema; /* Non-Recoverable Mem log A */ 371 u32 nrecmemb; /* Non-Recoverable Mem log B */ 372 373 }; 374 375 /* note that nrec_rdwr changed from NRECMEMA to NRECMEMB between the 5000 and 376 5400 better to use an inline function than a macro in this case */ 377 static inline int nrec_bank(struct i5400_error_info *info) 378 { 379 return ((info->nrecmema) >> 12) & 0x7; 380 } 381 static inline int nrec_rank(struct i5400_error_info *info) 382 { 383 return ((info->nrecmema) >> 8) & 0xf; 384 } 385 static inline int nrec_buf_id(struct i5400_error_info *info) 386 { 387 return ((info->nrecmema)) & 0xff; 388 } 389 static inline int nrec_rdwr(struct i5400_error_info *info) 390 { 391 return (info->nrecmemb) >> 31; 392 } 393 /* This applies to both NREC and REC string so it can be used with nrec_rdwr 394 and rec_rdwr */ 395 static inline const char *rdwr_str(int rdwr) 396 { 397 return rdwr ? "Write" : "Read"; 398 } 399 static inline int nrec_cas(struct i5400_error_info *info) 400 { 401 return ((info->nrecmemb) >> 16) & 0x1fff; 402 } 403 static inline int nrec_ras(struct i5400_error_info *info) 404 { 405 return (info->nrecmemb) & 0xffff; 406 } 407 static inline int rec_bank(struct i5400_error_info *info) 408 { 409 return ((info->recmema) >> 12) & 0x7; 410 } 411 static inline int rec_rank(struct i5400_error_info *info) 412 { 413 return ((info->recmema) >> 8) & 0xf; 414 } 415 static inline int rec_rdwr(struct i5400_error_info *info) 416 { 417 return (info->recmemb) >> 31; 418 } 419 static inline int rec_cas(struct i5400_error_info *info) 420 { 421 return ((info->recmemb) >> 16) & 0x1fff; 422 } 423 static inline int rec_ras(struct i5400_error_info *info) 424 { 425 return (info->recmemb) & 0xffff; 426 } 427 428 static struct edac_pci_ctl_info *i5400_pci; 429 430 /* 431 * i5400_get_error_info Retrieve the hardware error information from 432 * the hardware and cache it in the 'info' 433 * structure 434 */ 435 static void i5400_get_error_info(struct mem_ctl_info *mci, 436 struct i5400_error_info *info) 437 { 438 struct i5400_pvt *pvt; 439 u32 value; 440 441 pvt = mci->pvt_info; 442 443 /* read in the 1st FATAL error register */ 444 pci_read_config_dword(pvt->branchmap_werrors, FERR_FAT_FBD, &value); 445 446 /* Mask only the bits that the doc says are valid 447 */ 448 value &= (FERR_FAT_FBDCHAN | FERR_FAT_MASK); 449 450 /* If there is an error, then read in the 451 NEXT FATAL error register and the Memory Error Log Register A 452 */ 453 if (value & FERR_FAT_MASK) { 454 info->ferr_fat_fbd = value; 455 456 /* harvest the various error data we need */ 457 pci_read_config_dword(pvt->branchmap_werrors, 458 NERR_FAT_FBD, &info->nerr_fat_fbd); 459 pci_read_config_word(pvt->branchmap_werrors, 460 NRECMEMA, &info->nrecmema); 461 pci_read_config_dword(pvt->branchmap_werrors, 462 NRECMEMB, &info->nrecmemb); 463 464 /* Clear the error bits, by writing them back */ 465 pci_write_config_dword(pvt->branchmap_werrors, 466 FERR_FAT_FBD, value); 467 } else { 468 info->ferr_fat_fbd = 0; 469 info->nerr_fat_fbd = 0; 470 info->nrecmema = 0; 471 info->nrecmemb = 0; 472 } 473 474 /* read in the 1st NON-FATAL error register */ 475 pci_read_config_dword(pvt->branchmap_werrors, FERR_NF_FBD, &value); 476 477 /* If there is an error, then read in the 1st NON-FATAL error 478 * register as well */ 479 if (value & FERR_NF_MASK) { 480 info->ferr_nf_fbd = value; 481 482 /* harvest the various error data we need */ 483 pci_read_config_dword(pvt->branchmap_werrors, 484 NERR_NF_FBD, &info->nerr_nf_fbd); 485 pci_read_config_word(pvt->branchmap_werrors, 486 RECMEMA, &info->recmema); 487 pci_read_config_dword(pvt->branchmap_werrors, 488 RECMEMB, &info->recmemb); 489 pci_read_config_dword(pvt->branchmap_werrors, 490 REDMEMB, &info->redmemb); 491 492 /* Clear the error bits, by writing them back */ 493 pci_write_config_dword(pvt->branchmap_werrors, 494 FERR_NF_FBD, value); 495 } else { 496 info->ferr_nf_fbd = 0; 497 info->nerr_nf_fbd = 0; 498 info->recmema = 0; 499 info->recmemb = 0; 500 info->redmemb = 0; 501 } 502 } 503 504 /* 505 * i5400_proccess_non_recoverable_info(struct mem_ctl_info *mci, 506 * struct i5400_error_info *info, 507 * int handle_errors); 508 * 509 * handle the Intel FATAL and unrecoverable errors, if any 510 */ 511 static void i5400_proccess_non_recoverable_info(struct mem_ctl_info *mci, 512 struct i5400_error_info *info, 513 unsigned long allErrors) 514 { 515 char msg[EDAC_MC_LABEL_LEN + 1 + 90 + 80]; 516 int branch; 517 int channel; 518 int bank; 519 int buf_id; 520 int rank; 521 int rdwr; 522 int ras, cas; 523 int errnum; 524 char *type = NULL; 525 enum hw_event_mc_err_type tp_event = HW_EVENT_ERR_UNCORRECTED; 526 527 if (!allErrors) 528 return; /* if no error, return now */ 529 530 if (allErrors & ERROR_FAT_MASK) { 531 type = "FATAL"; 532 tp_event = HW_EVENT_ERR_FATAL; 533 } else if (allErrors & FERR_NF_UNCORRECTABLE) 534 type = "NON-FATAL uncorrected"; 535 else 536 type = "NON-FATAL recoverable"; 537 538 /* ONLY ONE of the possible error bits will be set, as per the docs */ 539 540 branch = extract_fbdchan_indx(info->ferr_fat_fbd); 541 channel = branch; 542 543 /* Use the NON-Recoverable macros to extract data */ 544 bank = nrec_bank(info); 545 rank = nrec_rank(info); 546 buf_id = nrec_buf_id(info); 547 rdwr = nrec_rdwr(info); 548 ras = nrec_ras(info); 549 cas = nrec_cas(info); 550 551 edac_dbg(0, "\t\tDIMM= %d Channels= %d,%d (Branch= %d DRAM Bank= %d Buffer ID = %d rdwr= %s ras= %d cas= %d)\n", 552 rank, channel, channel + 1, branch >> 1, bank, 553 buf_id, rdwr_str(rdwr), ras, cas); 554 555 /* Only 1 bit will be on */ 556 errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name)); 557 558 /* Form out message */ 559 snprintf(msg, sizeof(msg), 560 "Bank=%d Buffer ID = %d RAS=%d CAS=%d Err=0x%lx (%s)", 561 bank, buf_id, ras, cas, allErrors, error_name[errnum]); 562 563 edac_mc_handle_error(tp_event, mci, 1, 0, 0, 0, 564 branch >> 1, -1, rank, 565 rdwr ? "Write error" : "Read error", 566 msg); 567 } 568 569 /* 570 * i5400_process_fatal_error_info(struct mem_ctl_info *mci, 571 * struct i5400_error_info *info, 572 * int handle_errors); 573 * 574 * handle the Intel NON-FATAL errors, if any 575 */ 576 static void i5400_process_nonfatal_error_info(struct mem_ctl_info *mci, 577 struct i5400_error_info *info) 578 { 579 char msg[EDAC_MC_LABEL_LEN + 1 + 90 + 80]; 580 unsigned long allErrors; 581 int branch; 582 int channel; 583 int bank; 584 int rank; 585 int rdwr; 586 int ras, cas; 587 int errnum; 588 589 /* mask off the Error bits that are possible */ 590 allErrors = from_nf_ferr(info->ferr_nf_fbd & FERR_NF_MASK); 591 if (!allErrors) 592 return; /* if no error, return now */ 593 594 /* ONLY ONE of the possible error bits will be set, as per the docs */ 595 596 if (allErrors & (ERROR_NF_UNCORRECTABLE | ERROR_NF_RECOVERABLE)) { 597 i5400_proccess_non_recoverable_info(mci, info, allErrors); 598 return; 599 } 600 601 /* Correctable errors */ 602 if (allErrors & ERROR_NF_CORRECTABLE) { 603 edac_dbg(0, "\tCorrected bits= 0x%lx\n", allErrors); 604 605 branch = extract_fbdchan_indx(info->ferr_nf_fbd); 606 607 channel = 0; 608 if (REC_ECC_LOCATOR_ODD(info->redmemb)) 609 channel = 1; 610 611 /* Convert channel to be based from zero, instead of 612 * from branch base of 0 */ 613 channel += branch; 614 615 bank = rec_bank(info); 616 rank = rec_rank(info); 617 rdwr = rec_rdwr(info); 618 ras = rec_ras(info); 619 cas = rec_cas(info); 620 621 /* Only 1 bit will be on */ 622 errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name)); 623 624 edac_dbg(0, "\t\tDIMM= %d Channel= %d (Branch %d DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n", 625 rank, channel, branch >> 1, bank, 626 rdwr_str(rdwr), ras, cas); 627 628 /* Form out message */ 629 snprintf(msg, sizeof(msg), 630 "Corrected error (Branch=%d DRAM-Bank=%d RDWR=%s " 631 "RAS=%d CAS=%d, CE Err=0x%lx (%s))", 632 branch >> 1, bank, rdwr_str(rdwr), ras, cas, 633 allErrors, error_name[errnum]); 634 635 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0, 636 branch >> 1, channel % 2, rank, 637 rdwr ? "Write error" : "Read error", 638 msg); 639 640 return; 641 } 642 643 /* Miscellaneous errors */ 644 errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name)); 645 646 branch = extract_fbdchan_indx(info->ferr_nf_fbd); 647 648 i5400_mc_printk(mci, KERN_EMERG, 649 "Non-Fatal misc error (Branch=%d Err=%#lx (%s))", 650 branch >> 1, allErrors, error_name[errnum]); 651 } 652 653 /* 654 * i5400_process_error_info Process the error info that is 655 * in the 'info' structure, previously retrieved from hardware 656 */ 657 static void i5400_process_error_info(struct mem_ctl_info *mci, 658 struct i5400_error_info *info) 659 { u32 allErrors; 660 661 /* First handle any fatal errors that occurred */ 662 allErrors = (info->ferr_fat_fbd & FERR_FAT_MASK); 663 i5400_proccess_non_recoverable_info(mci, info, allErrors); 664 665 /* now handle any non-fatal errors that occurred */ 666 i5400_process_nonfatal_error_info(mci, info); 667 } 668 669 /* 670 * i5400_clear_error Retrieve any error from the hardware 671 * but do NOT process that error. 672 * Used for 'clearing' out of previous errors 673 * Called by the Core module. 674 */ 675 static void i5400_clear_error(struct mem_ctl_info *mci) 676 { 677 struct i5400_error_info info; 678 679 i5400_get_error_info(mci, &info); 680 } 681 682 /* 683 * i5400_check_error Retrieve and process errors reported by the 684 * hardware. Called by the Core module. 685 */ 686 static void i5400_check_error(struct mem_ctl_info *mci) 687 { 688 struct i5400_error_info info; 689 edac_dbg(4, "MC%d\n", mci->mc_idx); 690 i5400_get_error_info(mci, &info); 691 i5400_process_error_info(mci, &info); 692 } 693 694 /* 695 * i5400_put_devices 'put' all the devices that we have 696 * reserved via 'get' 697 */ 698 static void i5400_put_devices(struct mem_ctl_info *mci) 699 { 700 struct i5400_pvt *pvt; 701 702 pvt = mci->pvt_info; 703 704 /* Decrement usage count for devices */ 705 pci_dev_put(pvt->branch_1); 706 pci_dev_put(pvt->branch_0); 707 pci_dev_put(pvt->fsb_error_regs); 708 pci_dev_put(pvt->branchmap_werrors); 709 } 710 711 /* 712 * i5400_get_devices Find and perform 'get' operation on the MCH's 713 * device/functions we want to reference for this driver 714 * 715 * Need to 'get' device 16 func 1 and func 2 716 */ 717 static int i5400_get_devices(struct mem_ctl_info *mci, int dev_idx) 718 { 719 struct i5400_pvt *pvt; 720 struct pci_dev *pdev; 721 722 pvt = mci->pvt_info; 723 pvt->branchmap_werrors = NULL; 724 pvt->fsb_error_regs = NULL; 725 pvt->branch_0 = NULL; 726 pvt->branch_1 = NULL; 727 728 /* Attempt to 'get' the MCH register we want */ 729 pdev = NULL; 730 while (1) { 731 pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 732 PCI_DEVICE_ID_INTEL_5400_ERR, pdev); 733 if (!pdev) { 734 /* End of list, leave */ 735 i5400_printk(KERN_ERR, 736 "'system address,Process Bus' " 737 "device not found:" 738 "vendor 0x%x device 0x%x ERR func 1 " 739 "(broken BIOS?)\n", 740 PCI_VENDOR_ID_INTEL, 741 PCI_DEVICE_ID_INTEL_5400_ERR); 742 return -ENODEV; 743 } 744 745 /* Store device 16 func 1 */ 746 if (PCI_FUNC(pdev->devfn) == 1) 747 break; 748 } 749 pvt->branchmap_werrors = pdev; 750 751 pdev = NULL; 752 while (1) { 753 pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 754 PCI_DEVICE_ID_INTEL_5400_ERR, pdev); 755 if (!pdev) { 756 /* End of list, leave */ 757 i5400_printk(KERN_ERR, 758 "'system address,Process Bus' " 759 "device not found:" 760 "vendor 0x%x device 0x%x ERR func 2 " 761 "(broken BIOS?)\n", 762 PCI_VENDOR_ID_INTEL, 763 PCI_DEVICE_ID_INTEL_5400_ERR); 764 765 pci_dev_put(pvt->branchmap_werrors); 766 return -ENODEV; 767 } 768 769 /* Store device 16 func 2 */ 770 if (PCI_FUNC(pdev->devfn) == 2) 771 break; 772 } 773 pvt->fsb_error_regs = pdev; 774 775 edac_dbg(1, "System Address, processor bus- PCI Bus ID: %s %x:%x\n", 776 pci_name(pvt->system_address), 777 pvt->system_address->vendor, pvt->system_address->device); 778 edac_dbg(1, "Branchmap, control and errors - PCI Bus ID: %s %x:%x\n", 779 pci_name(pvt->branchmap_werrors), 780 pvt->branchmap_werrors->vendor, 781 pvt->branchmap_werrors->device); 782 edac_dbg(1, "FSB Error Regs - PCI Bus ID: %s %x:%x\n", 783 pci_name(pvt->fsb_error_regs), 784 pvt->fsb_error_regs->vendor, pvt->fsb_error_regs->device); 785 786 pvt->branch_0 = pci_get_device(PCI_VENDOR_ID_INTEL, 787 PCI_DEVICE_ID_INTEL_5400_FBD0, NULL); 788 if (!pvt->branch_0) { 789 i5400_printk(KERN_ERR, 790 "MC: 'BRANCH 0' device not found:" 791 "vendor 0x%x device 0x%x Func 0 (broken BIOS?)\n", 792 PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_FBD0); 793 794 pci_dev_put(pvt->fsb_error_regs); 795 pci_dev_put(pvt->branchmap_werrors); 796 return -ENODEV; 797 } 798 799 /* If this device claims to have more than 2 channels then 800 * fetch Branch 1's information 801 */ 802 if (pvt->maxch < CHANNELS_PER_BRANCH) 803 return 0; 804 805 pvt->branch_1 = pci_get_device(PCI_VENDOR_ID_INTEL, 806 PCI_DEVICE_ID_INTEL_5400_FBD1, NULL); 807 if (!pvt->branch_1) { 808 i5400_printk(KERN_ERR, 809 "MC: 'BRANCH 1' device not found:" 810 "vendor 0x%x device 0x%x Func 0 " 811 "(broken BIOS?)\n", 812 PCI_VENDOR_ID_INTEL, 813 PCI_DEVICE_ID_INTEL_5400_FBD1); 814 815 pci_dev_put(pvt->branch_0); 816 pci_dev_put(pvt->fsb_error_regs); 817 pci_dev_put(pvt->branchmap_werrors); 818 return -ENODEV; 819 } 820 821 return 0; 822 } 823 824 /* 825 * determine_amb_present 826 * 827 * the information is contained in DIMMS_PER_CHANNEL different 828 * registers determining which of the DIMMS_PER_CHANNEL requires 829 * knowing which channel is in question 830 * 831 * 2 branches, each with 2 channels 832 * b0_ambpresent0 for channel '0' 833 * b0_ambpresent1 for channel '1' 834 * b1_ambpresent0 for channel '2' 835 * b1_ambpresent1 for channel '3' 836 */ 837 static int determine_amb_present_reg(struct i5400_pvt *pvt, int channel) 838 { 839 int amb_present; 840 841 if (channel < CHANNELS_PER_BRANCH) { 842 if (channel & 0x1) 843 amb_present = pvt->b0_ambpresent1; 844 else 845 amb_present = pvt->b0_ambpresent0; 846 } else { 847 if (channel & 0x1) 848 amb_present = pvt->b1_ambpresent1; 849 else 850 amb_present = pvt->b1_ambpresent0; 851 } 852 853 return amb_present; 854 } 855 856 /* 857 * determine_mtr(pvt, dimm, channel) 858 * 859 * return the proper MTR register as determine by the dimm and desired channel 860 */ 861 static int determine_mtr(struct i5400_pvt *pvt, int dimm, int channel) 862 { 863 int mtr; 864 int n; 865 866 /* There is one MTR for each slot pair of FB-DIMMs, 867 Each slot pair may be at branch 0 or branch 1. 868 */ 869 n = dimm; 870 871 if (n >= DIMMS_PER_CHANNEL) { 872 edac_dbg(0, "ERROR: trying to access an invalid dimm: %d\n", 873 dimm); 874 return 0; 875 } 876 877 if (channel < CHANNELS_PER_BRANCH) 878 mtr = pvt->b0_mtr[n]; 879 else 880 mtr = pvt->b1_mtr[n]; 881 882 return mtr; 883 } 884 885 /* 886 */ 887 static void decode_mtr(int slot_row, u16 mtr) 888 { 889 int ans; 890 891 ans = MTR_DIMMS_PRESENT(mtr); 892 893 edac_dbg(2, "\tMTR%d=0x%x: DIMMs are %sPresent\n", 894 slot_row, mtr, ans ? "" : "NOT "); 895 if (!ans) 896 return; 897 898 edac_dbg(2, "\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr)); 899 900 edac_dbg(2, "\t\tELECTRICAL THROTTLING is %s\n", 901 MTR_DIMMS_ETHROTTLE(mtr) ? "enabled" : "disabled"); 902 903 edac_dbg(2, "\t\tNUMBANK: %d bank(s)\n", MTR_DRAM_BANKS(mtr)); 904 edac_dbg(2, "\t\tNUMRANK: %s\n", 905 MTR_DIMM_RANK(mtr) ? "double" : "single"); 906 edac_dbg(2, "\t\tNUMROW: %s\n", 907 MTR_DIMM_ROWS(mtr) == 0 ? "8,192 - 13 rows" : 908 MTR_DIMM_ROWS(mtr) == 1 ? "16,384 - 14 rows" : 909 MTR_DIMM_ROWS(mtr) == 2 ? "32,768 - 15 rows" : 910 "65,536 - 16 rows"); 911 edac_dbg(2, "\t\tNUMCOL: %s\n", 912 MTR_DIMM_COLS(mtr) == 0 ? "1,024 - 10 columns" : 913 MTR_DIMM_COLS(mtr) == 1 ? "2,048 - 11 columns" : 914 MTR_DIMM_COLS(mtr) == 2 ? "4,096 - 12 columns" : 915 "reserved"); 916 } 917 918 static void handle_channel(struct i5400_pvt *pvt, int dimm, int channel, 919 struct i5400_dimm_info *dinfo) 920 { 921 int mtr; 922 int amb_present_reg; 923 int addrBits; 924 925 mtr = determine_mtr(pvt, dimm, channel); 926 if (MTR_DIMMS_PRESENT(mtr)) { 927 amb_present_reg = determine_amb_present_reg(pvt, channel); 928 929 /* Determine if there is a DIMM present in this DIMM slot */ 930 if (amb_present_reg & (1 << dimm)) { 931 /* Start with the number of bits for a Bank 932 * on the DRAM */ 933 addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr); 934 /* Add thenumber of ROW bits */ 935 addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr); 936 /* add the number of COLUMN bits */ 937 addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr); 938 /* add the number of RANK bits */ 939 addrBits += MTR_DIMM_RANK(mtr); 940 941 addrBits += 6; /* add 64 bits per DIMM */ 942 addrBits -= 20; /* divide by 2^^20 */ 943 addrBits -= 3; /* 8 bits per bytes */ 944 945 dinfo->megabytes = 1 << addrBits; 946 } 947 } 948 } 949 950 /* 951 * calculate_dimm_size 952 * 953 * also will output a DIMM matrix map, if debug is enabled, for viewing 954 * how the DIMMs are populated 955 */ 956 static void calculate_dimm_size(struct i5400_pvt *pvt) 957 { 958 struct i5400_dimm_info *dinfo; 959 int dimm, max_dimms; 960 char *p, *mem_buffer; 961 int space, n; 962 int channel, branch; 963 964 /* ================= Generate some debug output ================= */ 965 space = PAGE_SIZE; 966 mem_buffer = p = kmalloc(space, GFP_KERNEL); 967 if (p == NULL) { 968 i5400_printk(KERN_ERR, "MC: %s:%s() kmalloc() failed\n", 969 __FILE__, __func__); 970 return; 971 } 972 973 /* Scan all the actual DIMMS 974 * and calculate the information for each DIMM 975 * Start with the highest dimm first, to display it first 976 * and work toward the 0th dimm 977 */ 978 max_dimms = pvt->maxdimmperch; 979 for (dimm = max_dimms - 1; dimm >= 0; dimm--) { 980 981 /* on an odd dimm, first output a 'boundary' marker, 982 * then reset the message buffer */ 983 if (dimm & 0x1) { 984 n = snprintf(p, space, "---------------------------" 985 "-------------------------------"); 986 p += n; 987 space -= n; 988 edac_dbg(2, "%s\n", mem_buffer); 989 p = mem_buffer; 990 space = PAGE_SIZE; 991 } 992 n = snprintf(p, space, "dimm %2d ", dimm); 993 p += n; 994 space -= n; 995 996 for (channel = 0; channel < pvt->maxch; channel++) { 997 dinfo = &pvt->dimm_info[dimm][channel]; 998 handle_channel(pvt, dimm, channel, dinfo); 999 n = snprintf(p, space, "%4d MB | ", dinfo->megabytes); 1000 p += n; 1001 space -= n; 1002 } 1003 edac_dbg(2, "%s\n", mem_buffer); 1004 p = mem_buffer; 1005 space = PAGE_SIZE; 1006 } 1007 1008 /* Output the last bottom 'boundary' marker */ 1009 n = snprintf(p, space, "---------------------------" 1010 "-------------------------------"); 1011 p += n; 1012 space -= n; 1013 edac_dbg(2, "%s\n", mem_buffer); 1014 p = mem_buffer; 1015 space = PAGE_SIZE; 1016 1017 /* now output the 'channel' labels */ 1018 n = snprintf(p, space, " "); 1019 p += n; 1020 space -= n; 1021 for (channel = 0; channel < pvt->maxch; channel++) { 1022 n = snprintf(p, space, "channel %d | ", channel); 1023 p += n; 1024 space -= n; 1025 } 1026 1027 space -= n; 1028 edac_dbg(2, "%s\n", mem_buffer); 1029 p = mem_buffer; 1030 space = PAGE_SIZE; 1031 1032 n = snprintf(p, space, " "); 1033 p += n; 1034 for (branch = 0; branch < MAX_BRANCHES; branch++) { 1035 n = snprintf(p, space, " branch %d | ", branch); 1036 p += n; 1037 space -= n; 1038 } 1039 1040 /* output the last message and free buffer */ 1041 edac_dbg(2, "%s\n", mem_buffer); 1042 kfree(mem_buffer); 1043 } 1044 1045 /* 1046 * i5400_get_mc_regs read in the necessary registers and 1047 * cache locally 1048 * 1049 * Fills in the private data members 1050 */ 1051 static void i5400_get_mc_regs(struct mem_ctl_info *mci) 1052 { 1053 struct i5400_pvt *pvt; 1054 u32 actual_tolm; 1055 u16 limit; 1056 int slot_row; 1057 int maxch; 1058 int maxdimmperch; 1059 int way0, way1; 1060 1061 pvt = mci->pvt_info; 1062 1063 pci_read_config_dword(pvt->system_address, AMBASE, 1064 &pvt->u.ambase_bottom); 1065 pci_read_config_dword(pvt->system_address, AMBASE + sizeof(u32), 1066 &pvt->u.ambase_top); 1067 1068 maxdimmperch = pvt->maxdimmperch; 1069 maxch = pvt->maxch; 1070 1071 edac_dbg(2, "AMBASE= 0x%lx MAXCH= %d MAX-DIMM-Per-CH= %d\n", 1072 (long unsigned int)pvt->ambase, pvt->maxch, pvt->maxdimmperch); 1073 1074 /* Get the Branch Map regs */ 1075 pci_read_config_word(pvt->branchmap_werrors, TOLM, &pvt->tolm); 1076 pvt->tolm >>= 12; 1077 edac_dbg(2, "\nTOLM (number of 256M regions) =%u (0x%x)\n", 1078 pvt->tolm, pvt->tolm); 1079 1080 actual_tolm = (u32) ((1000l * pvt->tolm) >> (30 - 28)); 1081 edac_dbg(2, "Actual TOLM byte addr=%u.%03u GB (0x%x)\n", 1082 actual_tolm/1000, actual_tolm % 1000, pvt->tolm << 28); 1083 1084 pci_read_config_word(pvt->branchmap_werrors, MIR0, &pvt->mir0); 1085 pci_read_config_word(pvt->branchmap_werrors, MIR1, &pvt->mir1); 1086 1087 /* Get the MIR[0-1] regs */ 1088 limit = (pvt->mir0 >> 4) & 0x0fff; 1089 way0 = pvt->mir0 & 0x1; 1090 way1 = pvt->mir0 & 0x2; 1091 edac_dbg(2, "MIR0: limit= 0x%x WAY1= %u WAY0= %x\n", 1092 limit, way1, way0); 1093 limit = (pvt->mir1 >> 4) & 0xfff; 1094 way0 = pvt->mir1 & 0x1; 1095 way1 = pvt->mir1 & 0x2; 1096 edac_dbg(2, "MIR1: limit= 0x%x WAY1= %u WAY0= %x\n", 1097 limit, way1, way0); 1098 1099 /* Get the set of MTR[0-3] regs by each branch */ 1100 for (slot_row = 0; slot_row < DIMMS_PER_CHANNEL; slot_row++) { 1101 int where = MTR0 + (slot_row * sizeof(u16)); 1102 1103 /* Branch 0 set of MTR registers */ 1104 pci_read_config_word(pvt->branch_0, where, 1105 &pvt->b0_mtr[slot_row]); 1106 1107 edac_dbg(2, "MTR%d where=0x%x B0 value=0x%x\n", 1108 slot_row, where, pvt->b0_mtr[slot_row]); 1109 1110 if (pvt->maxch < CHANNELS_PER_BRANCH) { 1111 pvt->b1_mtr[slot_row] = 0; 1112 continue; 1113 } 1114 1115 /* Branch 1 set of MTR registers */ 1116 pci_read_config_word(pvt->branch_1, where, 1117 &pvt->b1_mtr[slot_row]); 1118 edac_dbg(2, "MTR%d where=0x%x B1 value=0x%x\n", 1119 slot_row, where, pvt->b1_mtr[slot_row]); 1120 } 1121 1122 /* Read and dump branch 0's MTRs */ 1123 edac_dbg(2, "Memory Technology Registers:\n"); 1124 edac_dbg(2, " Branch 0:\n"); 1125 for (slot_row = 0; slot_row < DIMMS_PER_CHANNEL; slot_row++) 1126 decode_mtr(slot_row, pvt->b0_mtr[slot_row]); 1127 1128 pci_read_config_word(pvt->branch_0, AMBPRESENT_0, 1129 &pvt->b0_ambpresent0); 1130 edac_dbg(2, "\t\tAMB-Branch 0-present0 0x%x:\n", pvt->b0_ambpresent0); 1131 pci_read_config_word(pvt->branch_0, AMBPRESENT_1, 1132 &pvt->b0_ambpresent1); 1133 edac_dbg(2, "\t\tAMB-Branch 0-present1 0x%x:\n", pvt->b0_ambpresent1); 1134 1135 /* Only if we have 2 branchs (4 channels) */ 1136 if (pvt->maxch < CHANNELS_PER_BRANCH) { 1137 pvt->b1_ambpresent0 = 0; 1138 pvt->b1_ambpresent1 = 0; 1139 } else { 1140 /* Read and dump branch 1's MTRs */ 1141 edac_dbg(2, " Branch 1:\n"); 1142 for (slot_row = 0; slot_row < DIMMS_PER_CHANNEL; slot_row++) 1143 decode_mtr(slot_row, pvt->b1_mtr[slot_row]); 1144 1145 pci_read_config_word(pvt->branch_1, AMBPRESENT_0, 1146 &pvt->b1_ambpresent0); 1147 edac_dbg(2, "\t\tAMB-Branch 1-present0 0x%x:\n", 1148 pvt->b1_ambpresent0); 1149 pci_read_config_word(pvt->branch_1, AMBPRESENT_1, 1150 &pvt->b1_ambpresent1); 1151 edac_dbg(2, "\t\tAMB-Branch 1-present1 0x%x:\n", 1152 pvt->b1_ambpresent1); 1153 } 1154 1155 /* Go and determine the size of each DIMM and place in an 1156 * orderly matrix */ 1157 calculate_dimm_size(pvt); 1158 } 1159 1160 /* 1161 * i5400_init_dimms Initialize the 'dimms' table within 1162 * the mci control structure with the 1163 * addressing of memory. 1164 * 1165 * return: 1166 * 0 success 1167 * 1 no actual memory found on this MC 1168 */ 1169 static int i5400_init_dimms(struct mem_ctl_info *mci) 1170 { 1171 struct i5400_pvt *pvt; 1172 struct dimm_info *dimm; 1173 int ndimms, channel_count; 1174 int max_dimms; 1175 int mtr; 1176 int size_mb; 1177 int channel, slot; 1178 1179 pvt = mci->pvt_info; 1180 1181 channel_count = pvt->maxch; 1182 max_dimms = pvt->maxdimmperch; 1183 1184 ndimms = 0; 1185 1186 /* 1187 * FIXME: remove pvt->dimm_info[slot][channel] and use the 3 1188 * layers here. 1189 */ 1190 for (channel = 0; channel < mci->layers[0].size * mci->layers[1].size; 1191 channel++) { 1192 for (slot = 0; slot < mci->layers[2].size; slot++) { 1193 mtr = determine_mtr(pvt, slot, channel); 1194 1195 /* if no DIMMS on this slot, continue */ 1196 if (!MTR_DIMMS_PRESENT(mtr)) 1197 continue; 1198 1199 dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, 1200 channel / 2, channel % 2, slot); 1201 1202 size_mb = pvt->dimm_info[slot][channel].megabytes; 1203 1204 edac_dbg(2, "dimm (branch %d channel %d slot %d): %d.%03d GB\n", 1205 channel / 2, channel % 2, slot, 1206 size_mb / 1000, size_mb % 1000); 1207 1208 dimm->nr_pages = size_mb << 8; 1209 dimm->grain = 8; 1210 dimm->dtype = MTR_DRAM_WIDTH(mtr) == 8 ? 1211 DEV_X8 : DEV_X4; 1212 dimm->mtype = MEM_FB_DDR2; 1213 /* 1214 * The eccc mechanism is SDDC (aka SECC), with 1215 * is similar to Chipkill. 1216 */ 1217 dimm->edac_mode = MTR_DRAM_WIDTH(mtr) == 8 ? 1218 EDAC_S8ECD8ED : EDAC_S4ECD4ED; 1219 ndimms++; 1220 } 1221 } 1222 1223 /* 1224 * When just one memory is provided, it should be at location (0,0,0). 1225 * With such single-DIMM mode, the SDCC algorithm degrades to SECDEC+. 1226 */ 1227 if (ndimms == 1) 1228 mci->dimms[0]->edac_mode = EDAC_SECDED; 1229 1230 return (ndimms == 0); 1231 } 1232 1233 /* 1234 * i5400_enable_error_reporting 1235 * Turn on the memory reporting features of the hardware 1236 */ 1237 static void i5400_enable_error_reporting(struct mem_ctl_info *mci) 1238 { 1239 struct i5400_pvt *pvt; 1240 u32 fbd_error_mask; 1241 1242 pvt = mci->pvt_info; 1243 1244 /* Read the FBD Error Mask Register */ 1245 pci_read_config_dword(pvt->branchmap_werrors, EMASK_FBD, 1246 &fbd_error_mask); 1247 1248 /* Enable with a '0' */ 1249 fbd_error_mask &= ~(ENABLE_EMASK_ALL); 1250 1251 pci_write_config_dword(pvt->branchmap_werrors, EMASK_FBD, 1252 fbd_error_mask); 1253 } 1254 1255 /* 1256 * i5400_probe1 Probe for ONE instance of device to see if it is 1257 * present. 1258 * return: 1259 * 0 for FOUND a device 1260 * < 0 for error code 1261 */ 1262 static int i5400_probe1(struct pci_dev *pdev, int dev_idx) 1263 { 1264 struct mem_ctl_info *mci; 1265 struct i5400_pvt *pvt; 1266 struct edac_mc_layer layers[3]; 1267 1268 if (dev_idx >= ARRAY_SIZE(i5400_devs)) 1269 return -EINVAL; 1270 1271 edac_dbg(0, "MC: pdev bus %u dev=0x%x fn=0x%x\n", 1272 pdev->bus->number, 1273 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); 1274 1275 /* We only are looking for func 0 of the set */ 1276 if (PCI_FUNC(pdev->devfn) != 0) 1277 return -ENODEV; 1278 1279 /* 1280 * allocate a new MC control structure 1281 * 1282 * This drivers uses the DIMM slot as "csrow" and the rest as "channel". 1283 */ 1284 layers[0].type = EDAC_MC_LAYER_BRANCH; 1285 layers[0].size = MAX_BRANCHES; 1286 layers[0].is_virt_csrow = false; 1287 layers[1].type = EDAC_MC_LAYER_CHANNEL; 1288 layers[1].size = CHANNELS_PER_BRANCH; 1289 layers[1].is_virt_csrow = false; 1290 layers[2].type = EDAC_MC_LAYER_SLOT; 1291 layers[2].size = DIMMS_PER_CHANNEL; 1292 layers[2].is_virt_csrow = true; 1293 mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); 1294 if (mci == NULL) 1295 return -ENOMEM; 1296 1297 edac_dbg(0, "MC: mci = %p\n", mci); 1298 1299 mci->pdev = &pdev->dev; /* record ptr to the generic device */ 1300 1301 pvt = mci->pvt_info; 1302 pvt->system_address = pdev; /* Record this device in our private */ 1303 pvt->maxch = MAX_CHANNELS; 1304 pvt->maxdimmperch = DIMMS_PER_CHANNEL; 1305 1306 /* 'get' the pci devices we want to reserve for our use */ 1307 if (i5400_get_devices(mci, dev_idx)) 1308 goto fail0; 1309 1310 /* Time to get serious */ 1311 i5400_get_mc_regs(mci); /* retrieve the hardware registers */ 1312 1313 mci->mc_idx = 0; 1314 mci->mtype_cap = MEM_FLAG_FB_DDR2; 1315 mci->edac_ctl_cap = EDAC_FLAG_NONE; 1316 mci->edac_cap = EDAC_FLAG_NONE; 1317 mci->mod_name = "i5400_edac.c"; 1318 mci->mod_ver = I5400_REVISION; 1319 mci->ctl_name = i5400_devs[dev_idx].ctl_name; 1320 mci->dev_name = pci_name(pdev); 1321 mci->ctl_page_to_phys = NULL; 1322 1323 /* Set the function pointer to an actual operation function */ 1324 mci->edac_check = i5400_check_error; 1325 1326 /* initialize the MC control structure 'dimms' table 1327 * with the mapping and control information */ 1328 if (i5400_init_dimms(mci)) { 1329 edac_dbg(0, "MC: Setting mci->edac_cap to EDAC_FLAG_NONE because i5400_init_dimms() returned nonzero value\n"); 1330 mci->edac_cap = EDAC_FLAG_NONE; /* no dimms found */ 1331 } else { 1332 edac_dbg(1, "MC: Enable error reporting now\n"); 1333 i5400_enable_error_reporting(mci); 1334 } 1335 1336 /* add this new MC control structure to EDAC's list of MCs */ 1337 if (edac_mc_add_mc(mci)) { 1338 edac_dbg(0, "MC: failed edac_mc_add_mc()\n"); 1339 /* FIXME: perhaps some code should go here that disables error 1340 * reporting if we just enabled it 1341 */ 1342 goto fail1; 1343 } 1344 1345 i5400_clear_error(mci); 1346 1347 /* allocating generic PCI control info */ 1348 i5400_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); 1349 if (!i5400_pci) { 1350 printk(KERN_WARNING 1351 "%s(): Unable to create PCI control\n", 1352 __func__); 1353 printk(KERN_WARNING 1354 "%s(): PCI error report via EDAC not setup\n", 1355 __func__); 1356 } 1357 1358 return 0; 1359 1360 /* Error exit unwinding stack */ 1361 fail1: 1362 1363 i5400_put_devices(mci); 1364 1365 fail0: 1366 edac_mc_free(mci); 1367 return -ENODEV; 1368 } 1369 1370 /* 1371 * i5400_init_one constructor for one instance of device 1372 * 1373 * returns: 1374 * negative on error 1375 * count (>= 0) 1376 */ 1377 static int i5400_init_one(struct pci_dev *pdev, const struct pci_device_id *id) 1378 { 1379 int rc; 1380 1381 edac_dbg(0, "MC:\n"); 1382 1383 /* wake up device */ 1384 rc = pci_enable_device(pdev); 1385 if (rc) 1386 return rc; 1387 1388 /* now probe and enable the device */ 1389 return i5400_probe1(pdev, id->driver_data); 1390 } 1391 1392 /* 1393 * i5400_remove_one destructor for one instance of device 1394 * 1395 */ 1396 static void i5400_remove_one(struct pci_dev *pdev) 1397 { 1398 struct mem_ctl_info *mci; 1399 1400 edac_dbg(0, "\n"); 1401 1402 if (i5400_pci) 1403 edac_pci_release_generic_ctl(i5400_pci); 1404 1405 mci = edac_mc_del_mc(&pdev->dev); 1406 if (!mci) 1407 return; 1408 1409 /* retrieve references to resources, and free those resources */ 1410 i5400_put_devices(mci); 1411 1412 pci_disable_device(pdev); 1413 1414 edac_mc_free(mci); 1415 } 1416 1417 /* 1418 * pci_device_id table for which devices we are looking for 1419 * 1420 * The "E500P" device is the first device supported. 1421 */ 1422 static const struct pci_device_id i5400_pci_tbl[] = { 1423 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR)}, 1424 {0,} /* 0 terminated list. */ 1425 }; 1426 1427 MODULE_DEVICE_TABLE(pci, i5400_pci_tbl); 1428 1429 /* 1430 * i5400_driver pci_driver structure for this module 1431 * 1432 */ 1433 static struct pci_driver i5400_driver = { 1434 .name = "i5400_edac", 1435 .probe = i5400_init_one, 1436 .remove = i5400_remove_one, 1437 .id_table = i5400_pci_tbl, 1438 }; 1439 1440 /* 1441 * i5400_init Module entry function 1442 * Try to initialize this module for its devices 1443 */ 1444 static int __init i5400_init(void) 1445 { 1446 int pci_rc; 1447 1448 edac_dbg(2, "MC:\n"); 1449 1450 /* Ensure that the OPSTATE is set correctly for POLL or NMI */ 1451 opstate_init(); 1452 1453 pci_rc = pci_register_driver(&i5400_driver); 1454 1455 return (pci_rc < 0) ? pci_rc : 0; 1456 } 1457 1458 /* 1459 * i5400_exit() Module exit function 1460 * Unregister the driver 1461 */ 1462 static void __exit i5400_exit(void) 1463 { 1464 edac_dbg(2, "MC:\n"); 1465 pci_unregister_driver(&i5400_driver); 1466 } 1467 1468 module_init(i5400_init); 1469 module_exit(i5400_exit); 1470 1471 MODULE_LICENSE("GPL"); 1472 MODULE_AUTHOR("Ben Woodard <woodard@redhat.com>"); 1473 MODULE_AUTHOR("Mauro Carvalho Chehab"); 1474 MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)"); 1475 MODULE_DESCRIPTION("MC Driver for Intel I5400 memory controllers - " 1476 I5400_REVISION); 1477 1478 module_param(edac_op_state, int, 0444); 1479 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); 1480