1 /* 2 * Intel 5000(P/V/X) class Memory Controllers kernel module 3 * 4 * This file may be distributed under the terms of the 5 * GNU General Public License. 6 * 7 * Written by Douglas Thompson Linux Networx (http://lnxi.com) 8 * norsk5@xmission.com 9 * 10 * This module is based on the following document: 11 * 12 * Intel 5000X Chipset Memory Controller Hub (MCH) - Datasheet 13 * http://developer.intel.com/design/chipsets/datashts/313070.htm 14 * 15 */ 16 17 #include <linux/module.h> 18 #include <linux/init.h> 19 #include <linux/pci.h> 20 #include <linux/pci_ids.h> 21 #include <linux/slab.h> 22 #include <linux/edac.h> 23 #include <asm/mmzone.h> 24 25 #include "edac_core.h" 26 27 /* 28 * Alter this version for the I5000 module when modifications are made 29 */ 30 #define I5000_REVISION " Ver: 2.0.12 " __DATE__ 31 #define EDAC_MOD_STR "i5000_edac" 32 33 #define i5000_printk(level, fmt, arg...) \ 34 edac_printk(level, "i5000", fmt, ##arg) 35 36 #define i5000_mc_printk(mci, level, fmt, arg...) \ 37 edac_mc_chipset_printk(mci, level, "i5000", fmt, ##arg) 38 39 #ifndef PCI_DEVICE_ID_INTEL_FBD_0 40 #define PCI_DEVICE_ID_INTEL_FBD_0 0x25F5 41 #endif 42 #ifndef PCI_DEVICE_ID_INTEL_FBD_1 43 #define PCI_DEVICE_ID_INTEL_FBD_1 0x25F6 44 #endif 45 46 /* Device 16, 47 * Function 0: System Address 48 * Function 1: Memory Branch Map, Control, Errors Register 49 * Function 2: FSB Error Registers 50 * 51 * All 3 functions of Device 16 (0,1,2) share the SAME DID 52 */ 53 #define PCI_DEVICE_ID_INTEL_I5000_DEV16 0x25F0 54 55 /* OFFSETS for Function 0 */ 56 57 /* OFFSETS for Function 1 */ 58 #define AMBASE 0x48 59 #define MAXCH 0x56 60 #define MAXDIMMPERCH 0x57 61 #define TOLM 0x6C 62 #define REDMEMB 0x7C 63 #define RED_ECC_LOCATOR(x) ((x) & 0x3FFFF) 64 #define REC_ECC_LOCATOR_EVEN(x) ((x) & 0x001FF) 65 #define REC_ECC_LOCATOR_ODD(x) ((x) & 0x3FE00) 66 #define MIR0 0x80 67 #define MIR1 0x84 68 #define MIR2 0x88 69 #define AMIR0 0x8C 70 #define AMIR1 0x90 71 #define AMIR2 0x94 72 73 #define FERR_FAT_FBD 0x98 74 #define NERR_FAT_FBD 0x9C 75 #define EXTRACT_FBDCHAN_INDX(x) (((x)>>28) & 0x3) 76 #define FERR_FAT_FBDCHAN 0x30000000 77 #define FERR_FAT_M3ERR 0x00000004 78 #define FERR_FAT_M2ERR 0x00000002 79 #define FERR_FAT_M1ERR 0x00000001 80 #define FERR_FAT_MASK (FERR_FAT_M1ERR | \ 81 FERR_FAT_M2ERR | \ 82 FERR_FAT_M3ERR) 83 84 #define FERR_NF_FBD 0xA0 85 86 /* Thermal and SPD or BFD errors */ 87 #define FERR_NF_M28ERR 0x01000000 88 #define FERR_NF_M27ERR 0x00800000 89 #define FERR_NF_M26ERR 0x00400000 90 #define FERR_NF_M25ERR 0x00200000 91 #define FERR_NF_M24ERR 0x00100000 92 #define FERR_NF_M23ERR 0x00080000 93 #define FERR_NF_M22ERR 0x00040000 94 #define FERR_NF_M21ERR 0x00020000 95 96 /* Correctable errors */ 97 #define FERR_NF_M20ERR 0x00010000 98 #define FERR_NF_M19ERR 0x00008000 99 #define FERR_NF_M18ERR 0x00004000 100 #define FERR_NF_M17ERR 0x00002000 101 102 /* Non-Retry or redundant Retry errors */ 103 #define FERR_NF_M16ERR 0x00001000 104 #define FERR_NF_M15ERR 0x00000800 105 #define FERR_NF_M14ERR 0x00000400 106 #define FERR_NF_M13ERR 0x00000200 107 108 /* Uncorrectable errors */ 109 #define FERR_NF_M12ERR 0x00000100 110 #define FERR_NF_M11ERR 0x00000080 111 #define FERR_NF_M10ERR 0x00000040 112 #define FERR_NF_M9ERR 0x00000020 113 #define FERR_NF_M8ERR 0x00000010 114 #define FERR_NF_M7ERR 0x00000008 115 #define FERR_NF_M6ERR 0x00000004 116 #define FERR_NF_M5ERR 0x00000002 117 #define FERR_NF_M4ERR 0x00000001 118 119 #define FERR_NF_UNCORRECTABLE (FERR_NF_M12ERR | \ 120 FERR_NF_M11ERR | \ 121 FERR_NF_M10ERR | \ 122 FERR_NF_M9ERR | \ 123 FERR_NF_M8ERR | \ 124 FERR_NF_M7ERR | \ 125 FERR_NF_M6ERR | \ 126 FERR_NF_M5ERR | \ 127 FERR_NF_M4ERR) 128 #define FERR_NF_CORRECTABLE (FERR_NF_M20ERR | \ 129 FERR_NF_M19ERR | \ 130 FERR_NF_M18ERR | \ 131 FERR_NF_M17ERR) 132 #define FERR_NF_DIMM_SPARE (FERR_NF_M27ERR | \ 133 FERR_NF_M28ERR) 134 #define FERR_NF_THERMAL (FERR_NF_M26ERR | \ 135 FERR_NF_M25ERR | \ 136 FERR_NF_M24ERR | \ 137 FERR_NF_M23ERR) 138 #define FERR_NF_SPD_PROTOCOL (FERR_NF_M22ERR) 139 #define FERR_NF_NORTH_CRC (FERR_NF_M21ERR) 140 #define FERR_NF_NON_RETRY (FERR_NF_M13ERR | \ 141 FERR_NF_M14ERR | \ 142 FERR_NF_M15ERR) 143 144 #define NERR_NF_FBD 0xA4 145 #define FERR_NF_MASK (FERR_NF_UNCORRECTABLE | \ 146 FERR_NF_CORRECTABLE | \ 147 FERR_NF_DIMM_SPARE | \ 148 FERR_NF_THERMAL | \ 149 FERR_NF_SPD_PROTOCOL | \ 150 FERR_NF_NORTH_CRC | \ 151 FERR_NF_NON_RETRY) 152 153 #define EMASK_FBD 0xA8 154 #define EMASK_FBD_M28ERR 0x08000000 155 #define EMASK_FBD_M27ERR 0x04000000 156 #define EMASK_FBD_M26ERR 0x02000000 157 #define EMASK_FBD_M25ERR 0x01000000 158 #define EMASK_FBD_M24ERR 0x00800000 159 #define EMASK_FBD_M23ERR 0x00400000 160 #define EMASK_FBD_M22ERR 0x00200000 161 #define EMASK_FBD_M21ERR 0x00100000 162 #define EMASK_FBD_M20ERR 0x00080000 163 #define EMASK_FBD_M19ERR 0x00040000 164 #define EMASK_FBD_M18ERR 0x00020000 165 #define EMASK_FBD_M17ERR 0x00010000 166 167 #define EMASK_FBD_M15ERR 0x00004000 168 #define EMASK_FBD_M14ERR 0x00002000 169 #define EMASK_FBD_M13ERR 0x00001000 170 #define EMASK_FBD_M12ERR 0x00000800 171 #define EMASK_FBD_M11ERR 0x00000400 172 #define EMASK_FBD_M10ERR 0x00000200 173 #define EMASK_FBD_M9ERR 0x00000100 174 #define EMASK_FBD_M8ERR 0x00000080 175 #define EMASK_FBD_M7ERR 0x00000040 176 #define EMASK_FBD_M6ERR 0x00000020 177 #define EMASK_FBD_M5ERR 0x00000010 178 #define EMASK_FBD_M4ERR 0x00000008 179 #define EMASK_FBD_M3ERR 0x00000004 180 #define EMASK_FBD_M2ERR 0x00000002 181 #define EMASK_FBD_M1ERR 0x00000001 182 183 #define ENABLE_EMASK_FBD_FATAL_ERRORS (EMASK_FBD_M1ERR | \ 184 EMASK_FBD_M2ERR | \ 185 EMASK_FBD_M3ERR) 186 187 #define ENABLE_EMASK_FBD_UNCORRECTABLE (EMASK_FBD_M4ERR | \ 188 EMASK_FBD_M5ERR | \ 189 EMASK_FBD_M6ERR | \ 190 EMASK_FBD_M7ERR | \ 191 EMASK_FBD_M8ERR | \ 192 EMASK_FBD_M9ERR | \ 193 EMASK_FBD_M10ERR | \ 194 EMASK_FBD_M11ERR | \ 195 EMASK_FBD_M12ERR) 196 #define ENABLE_EMASK_FBD_CORRECTABLE (EMASK_FBD_M17ERR | \ 197 EMASK_FBD_M18ERR | \ 198 EMASK_FBD_M19ERR | \ 199 EMASK_FBD_M20ERR) 200 #define ENABLE_EMASK_FBD_DIMM_SPARE (EMASK_FBD_M27ERR | \ 201 EMASK_FBD_M28ERR) 202 #define ENABLE_EMASK_FBD_THERMALS (EMASK_FBD_M26ERR | \ 203 EMASK_FBD_M25ERR | \ 204 EMASK_FBD_M24ERR | \ 205 EMASK_FBD_M23ERR) 206 #define ENABLE_EMASK_FBD_SPD_PROTOCOL (EMASK_FBD_M22ERR) 207 #define ENABLE_EMASK_FBD_NORTH_CRC (EMASK_FBD_M21ERR) 208 #define ENABLE_EMASK_FBD_NON_RETRY (EMASK_FBD_M15ERR | \ 209 EMASK_FBD_M14ERR | \ 210 EMASK_FBD_M13ERR) 211 212 #define ENABLE_EMASK_ALL (ENABLE_EMASK_FBD_NON_RETRY | \ 213 ENABLE_EMASK_FBD_NORTH_CRC | \ 214 ENABLE_EMASK_FBD_SPD_PROTOCOL | \ 215 ENABLE_EMASK_FBD_THERMALS | \ 216 ENABLE_EMASK_FBD_DIMM_SPARE | \ 217 ENABLE_EMASK_FBD_FATAL_ERRORS | \ 218 ENABLE_EMASK_FBD_CORRECTABLE | \ 219 ENABLE_EMASK_FBD_UNCORRECTABLE) 220 221 #define ERR0_FBD 0xAC 222 #define ERR1_FBD 0xB0 223 #define ERR2_FBD 0xB4 224 #define MCERR_FBD 0xB8 225 #define NRECMEMA 0xBE 226 #define NREC_BANK(x) (((x)>>12) & 0x7) 227 #define NREC_RDWR(x) (((x)>>11) & 1) 228 #define NREC_RANK(x) (((x)>>8) & 0x7) 229 #define NRECMEMB 0xC0 230 #define NREC_CAS(x) (((x)>>16) & 0xFFFFFF) 231 #define NREC_RAS(x) ((x) & 0x7FFF) 232 #define NRECFGLOG 0xC4 233 #define NREEECFBDA 0xC8 234 #define NREEECFBDB 0xCC 235 #define NREEECFBDC 0xD0 236 #define NREEECFBDD 0xD4 237 #define NREEECFBDE 0xD8 238 #define REDMEMA 0xDC 239 #define RECMEMA 0xE2 240 #define REC_BANK(x) (((x)>>12) & 0x7) 241 #define REC_RDWR(x) (((x)>>11) & 1) 242 #define REC_RANK(x) (((x)>>8) & 0x7) 243 #define RECMEMB 0xE4 244 #define REC_CAS(x) (((x)>>16) & 0xFFFFFF) 245 #define REC_RAS(x) ((x) & 0x7FFF) 246 #define RECFGLOG 0xE8 247 #define RECFBDA 0xEC 248 #define RECFBDB 0xF0 249 #define RECFBDC 0xF4 250 #define RECFBDD 0xF8 251 #define RECFBDE 0xFC 252 253 /* OFFSETS for Function 2 */ 254 255 /* 256 * Device 21, 257 * Function 0: Memory Map Branch 0 258 * 259 * Device 22, 260 * Function 0: Memory Map Branch 1 261 */ 262 #define PCI_DEVICE_ID_I5000_BRANCH_0 0x25F5 263 #define PCI_DEVICE_ID_I5000_BRANCH_1 0x25F6 264 265 #define AMB_PRESENT_0 0x64 266 #define AMB_PRESENT_1 0x66 267 #define MTR0 0x80 268 #define MTR1 0x84 269 #define MTR2 0x88 270 #define MTR3 0x8C 271 272 #define NUM_MTRS 4 273 #define CHANNELS_PER_BRANCH (2) 274 275 /* Defines to extract the vaious fields from the 276 * MTRx - Memory Technology Registers 277 */ 278 #define MTR_DIMMS_PRESENT(mtr) ((mtr) & (0x1 << 8)) 279 #define MTR_DRAM_WIDTH(mtr) ((((mtr) >> 6) & 0x1) ? 8 : 4) 280 #define MTR_DRAM_BANKS(mtr) ((((mtr) >> 5) & 0x1) ? 8 : 4) 281 #define MTR_DRAM_BANKS_ADDR_BITS(mtr) ((MTR_DRAM_BANKS(mtr) == 8) ? 3 : 2) 282 #define MTR_DIMM_RANK(mtr) (((mtr) >> 4) & 0x1) 283 #define MTR_DIMM_RANK_ADDR_BITS(mtr) (MTR_DIMM_RANK(mtr) ? 2 : 1) 284 #define MTR_DIMM_ROWS(mtr) (((mtr) >> 2) & 0x3) 285 #define MTR_DIMM_ROWS_ADDR_BITS(mtr) (MTR_DIMM_ROWS(mtr) + 13) 286 #define MTR_DIMM_COLS(mtr) ((mtr) & 0x3) 287 #define MTR_DIMM_COLS_ADDR_BITS(mtr) (MTR_DIMM_COLS(mtr) + 10) 288 289 #ifdef CONFIG_EDAC_DEBUG 290 static char *numrow_toString[] = { 291 "8,192 - 13 rows", 292 "16,384 - 14 rows", 293 "32,768 - 15 rows", 294 "reserved" 295 }; 296 297 static char *numcol_toString[] = { 298 "1,024 - 10 columns", 299 "2,048 - 11 columns", 300 "4,096 - 12 columns", 301 "reserved" 302 }; 303 #endif 304 305 /* enables the report of miscellaneous messages as CE errors - default off */ 306 static int misc_messages; 307 308 /* Enumeration of supported devices */ 309 enum i5000_chips { 310 I5000P = 0, 311 I5000V = 1, /* future */ 312 I5000X = 2 /* future */ 313 }; 314 315 /* Device name and register DID (Device ID) */ 316 struct i5000_dev_info { 317 const char *ctl_name; /* name for this device */ 318 u16 fsb_mapping_errors; /* DID for the branchmap,control */ 319 }; 320 321 /* Table of devices attributes supported by this driver */ 322 static const struct i5000_dev_info i5000_devs[] = { 323 [I5000P] = { 324 .ctl_name = "I5000", 325 .fsb_mapping_errors = PCI_DEVICE_ID_INTEL_I5000_DEV16, 326 }, 327 }; 328 329 struct i5000_dimm_info { 330 int megabytes; /* size, 0 means not present */ 331 int dual_rank; 332 }; 333 334 #define MAX_CHANNELS 6 /* max possible channels */ 335 #define MAX_CSROWS (8*2) /* max possible csrows per channel */ 336 337 /* driver private data structure */ 338 struct i5000_pvt { 339 struct pci_dev *system_address; /* 16.0 */ 340 struct pci_dev *branchmap_werrors; /* 16.1 */ 341 struct pci_dev *fsb_error_regs; /* 16.2 */ 342 struct pci_dev *branch_0; /* 21.0 */ 343 struct pci_dev *branch_1; /* 22.0 */ 344 345 u16 tolm; /* top of low memory */ 346 u64 ambase; /* AMB BAR */ 347 348 u16 mir0, mir1, mir2; 349 350 u16 b0_mtr[NUM_MTRS]; /* Memory Technlogy Reg */ 351 u16 b0_ambpresent0; /* Branch 0, Channel 0 */ 352 u16 b0_ambpresent1; /* Brnach 0, Channel 1 */ 353 354 u16 b1_mtr[NUM_MTRS]; /* Memory Technlogy Reg */ 355 u16 b1_ambpresent0; /* Branch 1, Channel 8 */ 356 u16 b1_ambpresent1; /* Branch 1, Channel 1 */ 357 358 /* DIMM information matrix, allocating architecture maximums */ 359 struct i5000_dimm_info dimm_info[MAX_CSROWS][MAX_CHANNELS]; 360 361 /* Actual values for this controller */ 362 int maxch; /* Max channels */ 363 int maxdimmperch; /* Max DIMMs per channel */ 364 }; 365 366 /* I5000 MCH error information retrieved from Hardware */ 367 struct i5000_error_info { 368 369 /* These registers are always read from the MC */ 370 u32 ferr_fat_fbd; /* First Errors Fatal */ 371 u32 nerr_fat_fbd; /* Next Errors Fatal */ 372 u32 ferr_nf_fbd; /* First Errors Non-Fatal */ 373 u32 nerr_nf_fbd; /* Next Errors Non-Fatal */ 374 375 /* These registers are input ONLY if there was a Recoverable Error */ 376 u32 redmemb; /* Recoverable Mem Data Error log B */ 377 u16 recmema; /* Recoverable Mem Error log A */ 378 u32 recmemb; /* Recoverable Mem Error log B */ 379 380 /* These registers are input ONLY if there was a 381 * Non-Recoverable Error */ 382 u16 nrecmema; /* Non-Recoverable Mem log A */ 383 u16 nrecmemb; /* Non-Recoverable Mem log B */ 384 385 }; 386 387 static struct edac_pci_ctl_info *i5000_pci; 388 389 /* 390 * i5000_get_error_info Retrieve the hardware error information from 391 * the hardware and cache it in the 'info' 392 * structure 393 */ 394 static void i5000_get_error_info(struct mem_ctl_info *mci, 395 struct i5000_error_info *info) 396 { 397 struct i5000_pvt *pvt; 398 u32 value; 399 400 pvt = mci->pvt_info; 401 402 /* read in the 1st FATAL error register */ 403 pci_read_config_dword(pvt->branchmap_werrors, FERR_FAT_FBD, &value); 404 405 /* Mask only the bits that the doc says are valid 406 */ 407 value &= (FERR_FAT_FBDCHAN | FERR_FAT_MASK); 408 409 /* If there is an error, then read in the */ 410 /* NEXT FATAL error register and the Memory Error Log Register A */ 411 if (value & FERR_FAT_MASK) { 412 info->ferr_fat_fbd = value; 413 414 /* harvest the various error data we need */ 415 pci_read_config_dword(pvt->branchmap_werrors, 416 NERR_FAT_FBD, &info->nerr_fat_fbd); 417 pci_read_config_word(pvt->branchmap_werrors, 418 NRECMEMA, &info->nrecmema); 419 pci_read_config_word(pvt->branchmap_werrors, 420 NRECMEMB, &info->nrecmemb); 421 422 /* Clear the error bits, by writing them back */ 423 pci_write_config_dword(pvt->branchmap_werrors, 424 FERR_FAT_FBD, value); 425 } else { 426 info->ferr_fat_fbd = 0; 427 info->nerr_fat_fbd = 0; 428 info->nrecmema = 0; 429 info->nrecmemb = 0; 430 } 431 432 /* read in the 1st NON-FATAL error register */ 433 pci_read_config_dword(pvt->branchmap_werrors, FERR_NF_FBD, &value); 434 435 /* If there is an error, then read in the 1st NON-FATAL error 436 * register as well */ 437 if (value & FERR_NF_MASK) { 438 info->ferr_nf_fbd = value; 439 440 /* harvest the various error data we need */ 441 pci_read_config_dword(pvt->branchmap_werrors, 442 NERR_NF_FBD, &info->nerr_nf_fbd); 443 pci_read_config_word(pvt->branchmap_werrors, 444 RECMEMA, &info->recmema); 445 pci_read_config_dword(pvt->branchmap_werrors, 446 RECMEMB, &info->recmemb); 447 pci_read_config_dword(pvt->branchmap_werrors, 448 REDMEMB, &info->redmemb); 449 450 /* Clear the error bits, by writing them back */ 451 pci_write_config_dword(pvt->branchmap_werrors, 452 FERR_NF_FBD, value); 453 } else { 454 info->ferr_nf_fbd = 0; 455 info->nerr_nf_fbd = 0; 456 info->recmema = 0; 457 info->recmemb = 0; 458 info->redmemb = 0; 459 } 460 } 461 462 /* 463 * i5000_process_fatal_error_info(struct mem_ctl_info *mci, 464 * struct i5000_error_info *info, 465 * int handle_errors); 466 * 467 * handle the Intel FATAL errors, if any 468 */ 469 static void i5000_process_fatal_error_info(struct mem_ctl_info *mci, 470 struct i5000_error_info *info, 471 int handle_errors) 472 { 473 char msg[EDAC_MC_LABEL_LEN + 1 + 160]; 474 char *specific = NULL; 475 u32 allErrors; 476 int branch; 477 int channel; 478 int bank; 479 int rank; 480 int rdwr; 481 int ras, cas; 482 483 /* mask off the Error bits that are possible */ 484 allErrors = (info->ferr_fat_fbd & FERR_FAT_MASK); 485 if (!allErrors) 486 return; /* if no error, return now */ 487 488 branch = EXTRACT_FBDCHAN_INDX(info->ferr_fat_fbd); 489 channel = branch; 490 491 /* Use the NON-Recoverable macros to extract data */ 492 bank = NREC_BANK(info->nrecmema); 493 rank = NREC_RANK(info->nrecmema); 494 rdwr = NREC_RDWR(info->nrecmema); 495 ras = NREC_RAS(info->nrecmemb); 496 cas = NREC_CAS(info->nrecmemb); 497 498 debugf0("\t\tCSROW= %d Channels= %d,%d (Branch= %d " 499 "DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n", 500 rank, channel, channel + 1, branch >> 1, bank, 501 rdwr ? "Write" : "Read", ras, cas); 502 503 /* Only 1 bit will be on */ 504 switch (allErrors) { 505 case FERR_FAT_M1ERR: 506 specific = "Alert on non-redundant retry or fast " 507 "reset timeout"; 508 break; 509 case FERR_FAT_M2ERR: 510 specific = "Northbound CRC error on non-redundant " 511 "retry"; 512 break; 513 case FERR_FAT_M3ERR: 514 { 515 static int done; 516 517 /* 518 * This error is generated to inform that the intelligent 519 * throttling is disabled and the temperature passed the 520 * specified middle point. Since this is something the BIOS 521 * should take care of, we'll warn only once to avoid 522 * worthlessly flooding the log. 523 */ 524 if (done) 525 return; 526 done++; 527 528 specific = ">Tmid Thermal event with intelligent " 529 "throttling disabled"; 530 } 531 break; 532 } 533 534 /* Form out message */ 535 snprintf(msg, sizeof(msg), 536 "(Branch=%d DRAM-Bank=%d RDWR=%s RAS=%d CAS=%d " 537 "FATAL Err=0x%x (%s))", 538 branch >> 1, bank, rdwr ? "Write" : "Read", ras, cas, 539 allErrors, specific); 540 541 /* Call the helper to output message */ 542 edac_mc_handle_fbd_ue(mci, rank, channel, channel + 1, msg); 543 } 544 545 /* 546 * i5000_process_fatal_error_info(struct mem_ctl_info *mci, 547 * struct i5000_error_info *info, 548 * int handle_errors); 549 * 550 * handle the Intel NON-FATAL errors, if any 551 */ 552 static void i5000_process_nonfatal_error_info(struct mem_ctl_info *mci, 553 struct i5000_error_info *info, 554 int handle_errors) 555 { 556 char msg[EDAC_MC_LABEL_LEN + 1 + 170]; 557 char *specific = NULL; 558 u32 allErrors; 559 u32 ue_errors; 560 u32 ce_errors; 561 u32 misc_errors; 562 int branch; 563 int channel; 564 int bank; 565 int rank; 566 int rdwr; 567 int ras, cas; 568 569 /* mask off the Error bits that are possible */ 570 allErrors = (info->ferr_nf_fbd & FERR_NF_MASK); 571 if (!allErrors) 572 return; /* if no error, return now */ 573 574 /* ONLY ONE of the possible error bits will be set, as per the docs */ 575 ue_errors = allErrors & FERR_NF_UNCORRECTABLE; 576 if (ue_errors) { 577 debugf0("\tUncorrected bits= 0x%x\n", ue_errors); 578 579 branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd); 580 581 /* 582 * According with i5000 datasheet, bit 28 has no significance 583 * for errors M4Err-M12Err and M17Err-M21Err, on FERR_NF_FBD 584 */ 585 channel = branch & 2; 586 587 bank = NREC_BANK(info->nrecmema); 588 rank = NREC_RANK(info->nrecmema); 589 rdwr = NREC_RDWR(info->nrecmema); 590 ras = NREC_RAS(info->nrecmemb); 591 cas = NREC_CAS(info->nrecmemb); 592 593 debugf0 594 ("\t\tCSROW= %d Channels= %d,%d (Branch= %d " 595 "DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n", 596 rank, channel, channel + 1, branch >> 1, bank, 597 rdwr ? "Write" : "Read", ras, cas); 598 599 switch (ue_errors) { 600 case FERR_NF_M12ERR: 601 specific = "Non-Aliased Uncorrectable Patrol Data ECC"; 602 break; 603 case FERR_NF_M11ERR: 604 specific = "Non-Aliased Uncorrectable Spare-Copy " 605 "Data ECC"; 606 break; 607 case FERR_NF_M10ERR: 608 specific = "Non-Aliased Uncorrectable Mirrored Demand " 609 "Data ECC"; 610 break; 611 case FERR_NF_M9ERR: 612 specific = "Non-Aliased Uncorrectable Non-Mirrored " 613 "Demand Data ECC"; 614 break; 615 case FERR_NF_M8ERR: 616 specific = "Aliased Uncorrectable Patrol Data ECC"; 617 break; 618 case FERR_NF_M7ERR: 619 specific = "Aliased Uncorrectable Spare-Copy Data ECC"; 620 break; 621 case FERR_NF_M6ERR: 622 specific = "Aliased Uncorrectable Mirrored Demand " 623 "Data ECC"; 624 break; 625 case FERR_NF_M5ERR: 626 specific = "Aliased Uncorrectable Non-Mirrored Demand " 627 "Data ECC"; 628 break; 629 case FERR_NF_M4ERR: 630 specific = "Uncorrectable Data ECC on Replay"; 631 break; 632 } 633 634 /* Form out message */ 635 snprintf(msg, sizeof(msg), 636 "(Branch=%d DRAM-Bank=%d RDWR=%s RAS=%d " 637 "CAS=%d, UE Err=0x%x (%s))", 638 branch >> 1, bank, rdwr ? "Write" : "Read", ras, cas, 639 ue_errors, specific); 640 641 /* Call the helper to output message */ 642 edac_mc_handle_fbd_ue(mci, rank, channel, channel + 1, msg); 643 } 644 645 /* Check correctable errors */ 646 ce_errors = allErrors & FERR_NF_CORRECTABLE; 647 if (ce_errors) { 648 debugf0("\tCorrected bits= 0x%x\n", ce_errors); 649 650 branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd); 651 652 channel = 0; 653 if (REC_ECC_LOCATOR_ODD(info->redmemb)) 654 channel = 1; 655 656 /* Convert channel to be based from zero, instead of 657 * from branch base of 0 */ 658 channel += branch; 659 660 bank = REC_BANK(info->recmema); 661 rank = REC_RANK(info->recmema); 662 rdwr = REC_RDWR(info->recmema); 663 ras = REC_RAS(info->recmemb); 664 cas = REC_CAS(info->recmemb); 665 666 debugf0("\t\tCSROW= %d Channel= %d (Branch %d " 667 "DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n", 668 rank, channel, branch >> 1, bank, 669 rdwr ? "Write" : "Read", ras, cas); 670 671 switch (ce_errors) { 672 case FERR_NF_M17ERR: 673 specific = "Correctable Non-Mirrored Demand Data ECC"; 674 break; 675 case FERR_NF_M18ERR: 676 specific = "Correctable Mirrored Demand Data ECC"; 677 break; 678 case FERR_NF_M19ERR: 679 specific = "Correctable Spare-Copy Data ECC"; 680 break; 681 case FERR_NF_M20ERR: 682 specific = "Correctable Patrol Data ECC"; 683 break; 684 } 685 686 /* Form out message */ 687 snprintf(msg, sizeof(msg), 688 "(Branch=%d DRAM-Bank=%d RDWR=%s RAS=%d " 689 "CAS=%d, CE Err=0x%x (%s))", branch >> 1, bank, 690 rdwr ? "Write" : "Read", ras, cas, ce_errors, 691 specific); 692 693 /* Call the helper to output message */ 694 edac_mc_handle_fbd_ce(mci, rank, channel, msg); 695 } 696 697 if (!misc_messages) 698 return; 699 700 misc_errors = allErrors & (FERR_NF_NON_RETRY | FERR_NF_NORTH_CRC | 701 FERR_NF_SPD_PROTOCOL | FERR_NF_DIMM_SPARE); 702 if (misc_errors) { 703 switch (misc_errors) { 704 case FERR_NF_M13ERR: 705 specific = "Non-Retry or Redundant Retry FBD Memory " 706 "Alert or Redundant Fast Reset Timeout"; 707 break; 708 case FERR_NF_M14ERR: 709 specific = "Non-Retry or Redundant Retry FBD " 710 "Configuration Alert"; 711 break; 712 case FERR_NF_M15ERR: 713 specific = "Non-Retry or Redundant Retry FBD " 714 "Northbound CRC error on read data"; 715 break; 716 case FERR_NF_M21ERR: 717 specific = "FBD Northbound CRC error on " 718 "FBD Sync Status"; 719 break; 720 case FERR_NF_M22ERR: 721 specific = "SPD protocol error"; 722 break; 723 case FERR_NF_M27ERR: 724 specific = "DIMM-spare copy started"; 725 break; 726 case FERR_NF_M28ERR: 727 specific = "DIMM-spare copy completed"; 728 break; 729 } 730 branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd); 731 732 /* Form out message */ 733 snprintf(msg, sizeof(msg), 734 "(Branch=%d Err=%#x (%s))", branch >> 1, 735 misc_errors, specific); 736 737 /* Call the helper to output message */ 738 edac_mc_handle_fbd_ce(mci, 0, 0, msg); 739 } 740 } 741 742 /* 743 * i5000_process_error_info Process the error info that is 744 * in the 'info' structure, previously retrieved from hardware 745 */ 746 static void i5000_process_error_info(struct mem_ctl_info *mci, 747 struct i5000_error_info *info, 748 int handle_errors) 749 { 750 /* First handle any fatal errors that occurred */ 751 i5000_process_fatal_error_info(mci, info, handle_errors); 752 753 /* now handle any non-fatal errors that occurred */ 754 i5000_process_nonfatal_error_info(mci, info, handle_errors); 755 } 756 757 /* 758 * i5000_clear_error Retrieve any error from the hardware 759 * but do NOT process that error. 760 * Used for 'clearing' out of previous errors 761 * Called by the Core module. 762 */ 763 static void i5000_clear_error(struct mem_ctl_info *mci) 764 { 765 struct i5000_error_info info; 766 767 i5000_get_error_info(mci, &info); 768 } 769 770 /* 771 * i5000_check_error Retrieve and process errors reported by the 772 * hardware. Called by the Core module. 773 */ 774 static void i5000_check_error(struct mem_ctl_info *mci) 775 { 776 struct i5000_error_info info; 777 debugf4("MC%d: %s: %s()\n", mci->mc_idx, __FILE__, __func__); 778 i5000_get_error_info(mci, &info); 779 i5000_process_error_info(mci, &info, 1); 780 } 781 782 /* 783 * i5000_get_devices Find and perform 'get' operation on the MCH's 784 * device/functions we want to reference for this driver 785 * 786 * Need to 'get' device 16 func 1 and func 2 787 */ 788 static int i5000_get_devices(struct mem_ctl_info *mci, int dev_idx) 789 { 790 //const struct i5000_dev_info *i5000_dev = &i5000_devs[dev_idx]; 791 struct i5000_pvt *pvt; 792 struct pci_dev *pdev; 793 794 pvt = mci->pvt_info; 795 796 /* Attempt to 'get' the MCH register we want */ 797 pdev = NULL; 798 while (1) { 799 pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 800 PCI_DEVICE_ID_INTEL_I5000_DEV16, pdev); 801 802 /* End of list, leave */ 803 if (pdev == NULL) { 804 i5000_printk(KERN_ERR, 805 "'system address,Process Bus' " 806 "device not found:" 807 "vendor 0x%x device 0x%x FUNC 1 " 808 "(broken BIOS?)\n", 809 PCI_VENDOR_ID_INTEL, 810 PCI_DEVICE_ID_INTEL_I5000_DEV16); 811 812 return 1; 813 } 814 815 /* Scan for device 16 func 1 */ 816 if (PCI_FUNC(pdev->devfn) == 1) 817 break; 818 } 819 820 pvt->branchmap_werrors = pdev; 821 822 /* Attempt to 'get' the MCH register we want */ 823 pdev = NULL; 824 while (1) { 825 pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 826 PCI_DEVICE_ID_INTEL_I5000_DEV16, pdev); 827 828 if (pdev == NULL) { 829 i5000_printk(KERN_ERR, 830 "MC: 'branchmap,control,errors' " 831 "device not found:" 832 "vendor 0x%x device 0x%x Func 2 " 833 "(broken BIOS?)\n", 834 PCI_VENDOR_ID_INTEL, 835 PCI_DEVICE_ID_INTEL_I5000_DEV16); 836 837 pci_dev_put(pvt->branchmap_werrors); 838 return 1; 839 } 840 841 /* Scan for device 16 func 1 */ 842 if (PCI_FUNC(pdev->devfn) == 2) 843 break; 844 } 845 846 pvt->fsb_error_regs = pdev; 847 848 debugf1("System Address, processor bus- PCI Bus ID: %s %x:%x\n", 849 pci_name(pvt->system_address), 850 pvt->system_address->vendor, pvt->system_address->device); 851 debugf1("Branchmap, control and errors - PCI Bus ID: %s %x:%x\n", 852 pci_name(pvt->branchmap_werrors), 853 pvt->branchmap_werrors->vendor, pvt->branchmap_werrors->device); 854 debugf1("FSB Error Regs - PCI Bus ID: %s %x:%x\n", 855 pci_name(pvt->fsb_error_regs), 856 pvt->fsb_error_regs->vendor, pvt->fsb_error_regs->device); 857 858 pdev = NULL; 859 pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 860 PCI_DEVICE_ID_I5000_BRANCH_0, pdev); 861 862 if (pdev == NULL) { 863 i5000_printk(KERN_ERR, 864 "MC: 'BRANCH 0' device not found:" 865 "vendor 0x%x device 0x%x Func 0 (broken BIOS?)\n", 866 PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_I5000_BRANCH_0); 867 868 pci_dev_put(pvt->branchmap_werrors); 869 pci_dev_put(pvt->fsb_error_regs); 870 return 1; 871 } 872 873 pvt->branch_0 = pdev; 874 875 /* If this device claims to have more than 2 channels then 876 * fetch Branch 1's information 877 */ 878 if (pvt->maxch >= CHANNELS_PER_BRANCH) { 879 pdev = NULL; 880 pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 881 PCI_DEVICE_ID_I5000_BRANCH_1, pdev); 882 883 if (pdev == NULL) { 884 i5000_printk(KERN_ERR, 885 "MC: 'BRANCH 1' device not found:" 886 "vendor 0x%x device 0x%x Func 0 " 887 "(broken BIOS?)\n", 888 PCI_VENDOR_ID_INTEL, 889 PCI_DEVICE_ID_I5000_BRANCH_1); 890 891 pci_dev_put(pvt->branchmap_werrors); 892 pci_dev_put(pvt->fsb_error_regs); 893 pci_dev_put(pvt->branch_0); 894 return 1; 895 } 896 897 pvt->branch_1 = pdev; 898 } 899 900 return 0; 901 } 902 903 /* 904 * i5000_put_devices 'put' all the devices that we have 905 * reserved via 'get' 906 */ 907 static void i5000_put_devices(struct mem_ctl_info *mci) 908 { 909 struct i5000_pvt *pvt; 910 911 pvt = mci->pvt_info; 912 913 pci_dev_put(pvt->branchmap_werrors); /* FUNC 1 */ 914 pci_dev_put(pvt->fsb_error_regs); /* FUNC 2 */ 915 pci_dev_put(pvt->branch_0); /* DEV 21 */ 916 917 /* Only if more than 2 channels do we release the second branch */ 918 if (pvt->maxch >= CHANNELS_PER_BRANCH) 919 pci_dev_put(pvt->branch_1); /* DEV 22 */ 920 } 921 922 /* 923 * determine_amb_resent 924 * 925 * the information is contained in NUM_MTRS different registers 926 * determineing which of the NUM_MTRS requires knowing 927 * which channel is in question 928 * 929 * 2 branches, each with 2 channels 930 * b0_ambpresent0 for channel '0' 931 * b0_ambpresent1 for channel '1' 932 * b1_ambpresent0 for channel '2' 933 * b1_ambpresent1 for channel '3' 934 */ 935 static int determine_amb_present_reg(struct i5000_pvt *pvt, int channel) 936 { 937 int amb_present; 938 939 if (channel < CHANNELS_PER_BRANCH) { 940 if (channel & 0x1) 941 amb_present = pvt->b0_ambpresent1; 942 else 943 amb_present = pvt->b0_ambpresent0; 944 } else { 945 if (channel & 0x1) 946 amb_present = pvt->b1_ambpresent1; 947 else 948 amb_present = pvt->b1_ambpresent0; 949 } 950 951 return amb_present; 952 } 953 954 /* 955 * determine_mtr(pvt, csrow, channel) 956 * 957 * return the proper MTR register as determine by the csrow and channel desired 958 */ 959 static int determine_mtr(struct i5000_pvt *pvt, int csrow, int channel) 960 { 961 int mtr; 962 963 if (channel < CHANNELS_PER_BRANCH) 964 mtr = pvt->b0_mtr[csrow >> 1]; 965 else 966 mtr = pvt->b1_mtr[csrow >> 1]; 967 968 return mtr; 969 } 970 971 /* 972 */ 973 static void decode_mtr(int slot_row, u16 mtr) 974 { 975 int ans; 976 977 ans = MTR_DIMMS_PRESENT(mtr); 978 979 debugf2("\tMTR%d=0x%x: DIMMs are %s\n", slot_row, mtr, 980 ans ? "Present" : "NOT Present"); 981 if (!ans) 982 return; 983 984 debugf2("\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr)); 985 debugf2("\t\tNUMBANK: %d bank(s)\n", MTR_DRAM_BANKS(mtr)); 986 debugf2("\t\tNUMRANK: %s\n", MTR_DIMM_RANK(mtr) ? "double" : "single"); 987 debugf2("\t\tNUMROW: %s\n", numrow_toString[MTR_DIMM_ROWS(mtr)]); 988 debugf2("\t\tNUMCOL: %s\n", numcol_toString[MTR_DIMM_COLS(mtr)]); 989 } 990 991 static void handle_channel(struct i5000_pvt *pvt, int csrow, int channel, 992 struct i5000_dimm_info *dinfo) 993 { 994 int mtr; 995 int amb_present_reg; 996 int addrBits; 997 998 mtr = determine_mtr(pvt, csrow, channel); 999 if (MTR_DIMMS_PRESENT(mtr)) { 1000 amb_present_reg = determine_amb_present_reg(pvt, channel); 1001 1002 /* Determine if there is a DIMM present in this DIMM slot */ 1003 if (amb_present_reg & (1 << (csrow >> 1))) { 1004 dinfo->dual_rank = MTR_DIMM_RANK(mtr); 1005 1006 if (!((dinfo->dual_rank == 0) && 1007 ((csrow & 0x1) == 0x1))) { 1008 /* Start with the number of bits for a Bank 1009 * on the DRAM */ 1010 addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr); 1011 /* Add thenumber of ROW bits */ 1012 addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr); 1013 /* add the number of COLUMN bits */ 1014 addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr); 1015 1016 addrBits += 6; /* add 64 bits per DIMM */ 1017 addrBits -= 20; /* divide by 2^^20 */ 1018 addrBits -= 3; /* 8 bits per bytes */ 1019 1020 dinfo->megabytes = 1 << addrBits; 1021 } 1022 } 1023 } 1024 } 1025 1026 /* 1027 * calculate_dimm_size 1028 * 1029 * also will output a DIMM matrix map, if debug is enabled, for viewing 1030 * how the DIMMs are populated 1031 */ 1032 static void calculate_dimm_size(struct i5000_pvt *pvt) 1033 { 1034 struct i5000_dimm_info *dinfo; 1035 int csrow, max_csrows; 1036 char *p, *mem_buffer; 1037 int space, n; 1038 int channel; 1039 1040 /* ================= Generate some debug output ================= */ 1041 space = PAGE_SIZE; 1042 mem_buffer = p = kmalloc(space, GFP_KERNEL); 1043 if (p == NULL) { 1044 i5000_printk(KERN_ERR, "MC: %s:%s() kmalloc() failed\n", 1045 __FILE__, __func__); 1046 return; 1047 } 1048 1049 n = snprintf(p, space, "\n"); 1050 p += n; 1051 space -= n; 1052 1053 /* Scan all the actual CSROWS (which is # of DIMMS * 2) 1054 * and calculate the information for each DIMM 1055 * Start with the highest csrow first, to display it first 1056 * and work toward the 0th csrow 1057 */ 1058 max_csrows = pvt->maxdimmperch * 2; 1059 for (csrow = max_csrows - 1; csrow >= 0; csrow--) { 1060 1061 /* on an odd csrow, first output a 'boundary' marker, 1062 * then reset the message buffer */ 1063 if (csrow & 0x1) { 1064 n = snprintf(p, space, "---------------------------" 1065 "--------------------------------"); 1066 p += n; 1067 space -= n; 1068 debugf2("%s\n", mem_buffer); 1069 p = mem_buffer; 1070 space = PAGE_SIZE; 1071 } 1072 n = snprintf(p, space, "csrow %2d ", csrow); 1073 p += n; 1074 space -= n; 1075 1076 for (channel = 0; channel < pvt->maxch; channel++) { 1077 dinfo = &pvt->dimm_info[csrow][channel]; 1078 handle_channel(pvt, csrow, channel, dinfo); 1079 n = snprintf(p, space, "%4d MB | ", dinfo->megabytes); 1080 p += n; 1081 space -= n; 1082 } 1083 n = snprintf(p, space, "\n"); 1084 p += n; 1085 space -= n; 1086 } 1087 1088 /* Output the last bottom 'boundary' marker */ 1089 n = snprintf(p, space, "---------------------------" 1090 "--------------------------------\n"); 1091 p += n; 1092 space -= n; 1093 1094 /* now output the 'channel' labels */ 1095 n = snprintf(p, space, " "); 1096 p += n; 1097 space -= n; 1098 for (channel = 0; channel < pvt->maxch; channel++) { 1099 n = snprintf(p, space, "channel %d | ", channel); 1100 p += n; 1101 space -= n; 1102 } 1103 n = snprintf(p, space, "\n"); 1104 p += n; 1105 space -= n; 1106 1107 /* output the last message and free buffer */ 1108 debugf2("%s\n", mem_buffer); 1109 kfree(mem_buffer); 1110 } 1111 1112 /* 1113 * i5000_get_mc_regs read in the necessary registers and 1114 * cache locally 1115 * 1116 * Fills in the private data members 1117 */ 1118 static void i5000_get_mc_regs(struct mem_ctl_info *mci) 1119 { 1120 struct i5000_pvt *pvt; 1121 u32 actual_tolm; 1122 u16 limit; 1123 int slot_row; 1124 int maxch; 1125 int maxdimmperch; 1126 int way0, way1; 1127 1128 pvt = mci->pvt_info; 1129 1130 pci_read_config_dword(pvt->system_address, AMBASE, 1131 (u32 *) & pvt->ambase); 1132 pci_read_config_dword(pvt->system_address, AMBASE + sizeof(u32), 1133 ((u32 *) & pvt->ambase) + sizeof(u32)); 1134 1135 maxdimmperch = pvt->maxdimmperch; 1136 maxch = pvt->maxch; 1137 1138 debugf2("AMBASE= 0x%lx MAXCH= %d MAX-DIMM-Per-CH= %d\n", 1139 (long unsigned int)pvt->ambase, pvt->maxch, pvt->maxdimmperch); 1140 1141 /* Get the Branch Map regs */ 1142 pci_read_config_word(pvt->branchmap_werrors, TOLM, &pvt->tolm); 1143 pvt->tolm >>= 12; 1144 debugf2("\nTOLM (number of 256M regions) =%u (0x%x)\n", pvt->tolm, 1145 pvt->tolm); 1146 1147 actual_tolm = pvt->tolm << 28; 1148 debugf2("Actual TOLM byte addr=%u (0x%x)\n", actual_tolm, actual_tolm); 1149 1150 pci_read_config_word(pvt->branchmap_werrors, MIR0, &pvt->mir0); 1151 pci_read_config_word(pvt->branchmap_werrors, MIR1, &pvt->mir1); 1152 pci_read_config_word(pvt->branchmap_werrors, MIR2, &pvt->mir2); 1153 1154 /* Get the MIR[0-2] regs */ 1155 limit = (pvt->mir0 >> 4) & 0x0FFF; 1156 way0 = pvt->mir0 & 0x1; 1157 way1 = pvt->mir0 & 0x2; 1158 debugf2("MIR0: limit= 0x%x WAY1= %u WAY0= %x\n", limit, way1, way0); 1159 limit = (pvt->mir1 >> 4) & 0x0FFF; 1160 way0 = pvt->mir1 & 0x1; 1161 way1 = pvt->mir1 & 0x2; 1162 debugf2("MIR1: limit= 0x%x WAY1= %u WAY0= %x\n", limit, way1, way0); 1163 limit = (pvt->mir2 >> 4) & 0x0FFF; 1164 way0 = pvt->mir2 & 0x1; 1165 way1 = pvt->mir2 & 0x2; 1166 debugf2("MIR2: limit= 0x%x WAY1= %u WAY0= %x\n", limit, way1, way0); 1167 1168 /* Get the MTR[0-3] regs */ 1169 for (slot_row = 0; slot_row < NUM_MTRS; slot_row++) { 1170 int where = MTR0 + (slot_row * sizeof(u32)); 1171 1172 pci_read_config_word(pvt->branch_0, where, 1173 &pvt->b0_mtr[slot_row]); 1174 1175 debugf2("MTR%d where=0x%x B0 value=0x%x\n", slot_row, where, 1176 pvt->b0_mtr[slot_row]); 1177 1178 if (pvt->maxch >= CHANNELS_PER_BRANCH) { 1179 pci_read_config_word(pvt->branch_1, where, 1180 &pvt->b1_mtr[slot_row]); 1181 debugf2("MTR%d where=0x%x B1 value=0x%x\n", slot_row, 1182 where, pvt->b1_mtr[slot_row]); 1183 } else { 1184 pvt->b1_mtr[slot_row] = 0; 1185 } 1186 } 1187 1188 /* Read and dump branch 0's MTRs */ 1189 debugf2("\nMemory Technology Registers:\n"); 1190 debugf2(" Branch 0:\n"); 1191 for (slot_row = 0; slot_row < NUM_MTRS; slot_row++) { 1192 decode_mtr(slot_row, pvt->b0_mtr[slot_row]); 1193 } 1194 pci_read_config_word(pvt->branch_0, AMB_PRESENT_0, 1195 &pvt->b0_ambpresent0); 1196 debugf2("\t\tAMB-Branch 0-present0 0x%x:\n", pvt->b0_ambpresent0); 1197 pci_read_config_word(pvt->branch_0, AMB_PRESENT_1, 1198 &pvt->b0_ambpresent1); 1199 debugf2("\t\tAMB-Branch 0-present1 0x%x:\n", pvt->b0_ambpresent1); 1200 1201 /* Only if we have 2 branchs (4 channels) */ 1202 if (pvt->maxch < CHANNELS_PER_BRANCH) { 1203 pvt->b1_ambpresent0 = 0; 1204 pvt->b1_ambpresent1 = 0; 1205 } else { 1206 /* Read and dump branch 1's MTRs */ 1207 debugf2(" Branch 1:\n"); 1208 for (slot_row = 0; slot_row < NUM_MTRS; slot_row++) { 1209 decode_mtr(slot_row, pvt->b1_mtr[slot_row]); 1210 } 1211 pci_read_config_word(pvt->branch_1, AMB_PRESENT_0, 1212 &pvt->b1_ambpresent0); 1213 debugf2("\t\tAMB-Branch 1-present0 0x%x:\n", 1214 pvt->b1_ambpresent0); 1215 pci_read_config_word(pvt->branch_1, AMB_PRESENT_1, 1216 &pvt->b1_ambpresent1); 1217 debugf2("\t\tAMB-Branch 1-present1 0x%x:\n", 1218 pvt->b1_ambpresent1); 1219 } 1220 1221 /* Go and determine the size of each DIMM and place in an 1222 * orderly matrix */ 1223 calculate_dimm_size(pvt); 1224 } 1225 1226 /* 1227 * i5000_init_csrows Initialize the 'csrows' table within 1228 * the mci control structure with the 1229 * addressing of memory. 1230 * 1231 * return: 1232 * 0 success 1233 * 1 no actual memory found on this MC 1234 */ 1235 static int i5000_init_csrows(struct mem_ctl_info *mci) 1236 { 1237 struct i5000_pvt *pvt; 1238 struct csrow_info *p_csrow; 1239 int empty, channel_count; 1240 int max_csrows; 1241 int mtr, mtr1; 1242 int csrow_megs; 1243 int channel; 1244 int csrow; 1245 1246 pvt = mci->pvt_info; 1247 1248 channel_count = pvt->maxch; 1249 max_csrows = pvt->maxdimmperch * 2; 1250 1251 empty = 1; /* Assume NO memory */ 1252 1253 for (csrow = 0; csrow < max_csrows; csrow++) { 1254 p_csrow = &mci->csrows[csrow]; 1255 1256 p_csrow->csrow_idx = csrow; 1257 1258 /* use branch 0 for the basis */ 1259 mtr = pvt->b0_mtr[csrow >> 1]; 1260 mtr1 = pvt->b1_mtr[csrow >> 1]; 1261 1262 /* if no DIMMS on this row, continue */ 1263 if (!MTR_DIMMS_PRESENT(mtr) && !MTR_DIMMS_PRESENT(mtr1)) 1264 continue; 1265 1266 /* FAKE OUT VALUES, FIXME */ 1267 p_csrow->first_page = 0 + csrow * 20; 1268 p_csrow->last_page = 9 + csrow * 20; 1269 p_csrow->page_mask = 0xFFF; 1270 1271 p_csrow->grain = 8; 1272 1273 csrow_megs = 0; 1274 for (channel = 0; channel < pvt->maxch; channel++) { 1275 csrow_megs += pvt->dimm_info[csrow][channel].megabytes; 1276 } 1277 1278 p_csrow->nr_pages = csrow_megs << 8; 1279 1280 /* Assume DDR2 for now */ 1281 p_csrow->mtype = MEM_FB_DDR2; 1282 1283 /* ask what device type on this row */ 1284 if (MTR_DRAM_WIDTH(mtr)) 1285 p_csrow->dtype = DEV_X8; 1286 else 1287 p_csrow->dtype = DEV_X4; 1288 1289 p_csrow->edac_mode = EDAC_S8ECD8ED; 1290 1291 empty = 0; 1292 } 1293 1294 return empty; 1295 } 1296 1297 /* 1298 * i5000_enable_error_reporting 1299 * Turn on the memory reporting features of the hardware 1300 */ 1301 static void i5000_enable_error_reporting(struct mem_ctl_info *mci) 1302 { 1303 struct i5000_pvt *pvt; 1304 u32 fbd_error_mask; 1305 1306 pvt = mci->pvt_info; 1307 1308 /* Read the FBD Error Mask Register */ 1309 pci_read_config_dword(pvt->branchmap_werrors, EMASK_FBD, 1310 &fbd_error_mask); 1311 1312 /* Enable with a '0' */ 1313 fbd_error_mask &= ~(ENABLE_EMASK_ALL); 1314 1315 pci_write_config_dword(pvt->branchmap_werrors, EMASK_FBD, 1316 fbd_error_mask); 1317 } 1318 1319 /* 1320 * i5000_get_dimm_and_channel_counts(pdev, &num_csrows, &num_channels) 1321 * 1322 * ask the device how many channels are present and how many CSROWS 1323 * as well 1324 */ 1325 static void i5000_get_dimm_and_channel_counts(struct pci_dev *pdev, 1326 int *num_dimms_per_channel, 1327 int *num_channels) 1328 { 1329 u8 value; 1330 1331 /* Need to retrieve just how many channels and dimms per channel are 1332 * supported on this memory controller 1333 */ 1334 pci_read_config_byte(pdev, MAXDIMMPERCH, &value); 1335 *num_dimms_per_channel = (int)value *2; 1336 1337 pci_read_config_byte(pdev, MAXCH, &value); 1338 *num_channels = (int)value; 1339 } 1340 1341 /* 1342 * i5000_probe1 Probe for ONE instance of device to see if it is 1343 * present. 1344 * return: 1345 * 0 for FOUND a device 1346 * < 0 for error code 1347 */ 1348 static int i5000_probe1(struct pci_dev *pdev, int dev_idx) 1349 { 1350 struct mem_ctl_info *mci; 1351 struct i5000_pvt *pvt; 1352 int num_channels; 1353 int num_dimms_per_channel; 1354 int num_csrows; 1355 1356 debugf0("MC: %s: %s(), pdev bus %u dev=0x%x fn=0x%x\n", 1357 __FILE__, __func__, 1358 pdev->bus->number, 1359 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); 1360 1361 /* We only are looking for func 0 of the set */ 1362 if (PCI_FUNC(pdev->devfn) != 0) 1363 return -ENODEV; 1364 1365 /* Ask the devices for the number of CSROWS and CHANNELS so 1366 * that we can calculate the memory resources, etc 1367 * 1368 * The Chipset will report what it can handle which will be greater 1369 * or equal to what the motherboard manufacturer will implement. 1370 * 1371 * As we don't have a motherboard identification routine to determine 1372 * actual number of slots/dimms per channel, we thus utilize the 1373 * resource as specified by the chipset. Thus, we might have 1374 * have more DIMMs per channel than actually on the mobo, but this 1375 * allows the driver to support upto the chipset max, without 1376 * some fancy mobo determination. 1377 */ 1378 i5000_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel, 1379 &num_channels); 1380 num_csrows = num_dimms_per_channel * 2; 1381 1382 debugf0("MC: %s(): Number of - Channels= %d DIMMS= %d CSROWS= %d\n", 1383 __func__, num_channels, num_dimms_per_channel, num_csrows); 1384 1385 /* allocate a new MC control structure */ 1386 mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels, 0); 1387 1388 if (mci == NULL) 1389 return -ENOMEM; 1390 1391 kobject_get(&mci->edac_mci_kobj); 1392 debugf0("MC: %s: %s(): mci = %p\n", __FILE__, __func__, mci); 1393 1394 mci->dev = &pdev->dev; /* record ptr to the generic device */ 1395 1396 pvt = mci->pvt_info; 1397 pvt->system_address = pdev; /* Record this device in our private */ 1398 pvt->maxch = num_channels; 1399 pvt->maxdimmperch = num_dimms_per_channel; 1400 1401 /* 'get' the pci devices we want to reserve for our use */ 1402 if (i5000_get_devices(mci, dev_idx)) 1403 goto fail0; 1404 1405 /* Time to get serious */ 1406 i5000_get_mc_regs(mci); /* retrieve the hardware registers */ 1407 1408 mci->mc_idx = 0; 1409 mci->mtype_cap = MEM_FLAG_FB_DDR2; 1410 mci->edac_ctl_cap = EDAC_FLAG_NONE; 1411 mci->edac_cap = EDAC_FLAG_NONE; 1412 mci->mod_name = "i5000_edac.c"; 1413 mci->mod_ver = I5000_REVISION; 1414 mci->ctl_name = i5000_devs[dev_idx].ctl_name; 1415 mci->dev_name = pci_name(pdev); 1416 mci->ctl_page_to_phys = NULL; 1417 1418 /* Set the function pointer to an actual operation function */ 1419 mci->edac_check = i5000_check_error; 1420 1421 /* initialize the MC control structure 'csrows' table 1422 * with the mapping and control information */ 1423 if (i5000_init_csrows(mci)) { 1424 debugf0("MC: Setting mci->edac_cap to EDAC_FLAG_NONE\n" 1425 " because i5000_init_csrows() returned nonzero " 1426 "value\n"); 1427 mci->edac_cap = EDAC_FLAG_NONE; /* no csrows found */ 1428 } else { 1429 debugf1("MC: Enable error reporting now\n"); 1430 i5000_enable_error_reporting(mci); 1431 } 1432 1433 /* add this new MC control structure to EDAC's list of MCs */ 1434 if (edac_mc_add_mc(mci)) { 1435 debugf0("MC: %s: %s(): failed edac_mc_add_mc()\n", 1436 __FILE__, __func__); 1437 /* FIXME: perhaps some code should go here that disables error 1438 * reporting if we just enabled it 1439 */ 1440 goto fail1; 1441 } 1442 1443 i5000_clear_error(mci); 1444 1445 /* allocating generic PCI control info */ 1446 i5000_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); 1447 if (!i5000_pci) { 1448 printk(KERN_WARNING 1449 "%s(): Unable to create PCI control\n", 1450 __func__); 1451 printk(KERN_WARNING 1452 "%s(): PCI error report via EDAC not setup\n", 1453 __func__); 1454 } 1455 1456 return 0; 1457 1458 /* Error exit unwinding stack */ 1459 fail1: 1460 1461 i5000_put_devices(mci); 1462 1463 fail0: 1464 kobject_put(&mci->edac_mci_kobj); 1465 edac_mc_free(mci); 1466 return -ENODEV; 1467 } 1468 1469 /* 1470 * i5000_init_one constructor for one instance of device 1471 * 1472 * returns: 1473 * negative on error 1474 * count (>= 0) 1475 */ 1476 static int __devinit i5000_init_one(struct pci_dev *pdev, 1477 const struct pci_device_id *id) 1478 { 1479 int rc; 1480 1481 debugf0("MC: %s: %s()\n", __FILE__, __func__); 1482 1483 /* wake up device */ 1484 rc = pci_enable_device(pdev); 1485 if (rc) 1486 return rc; 1487 1488 /* now probe and enable the device */ 1489 return i5000_probe1(pdev, id->driver_data); 1490 } 1491 1492 /* 1493 * i5000_remove_one destructor for one instance of device 1494 * 1495 */ 1496 static void __devexit i5000_remove_one(struct pci_dev *pdev) 1497 { 1498 struct mem_ctl_info *mci; 1499 1500 debugf0("%s: %s()\n", __FILE__, __func__); 1501 1502 if (i5000_pci) 1503 edac_pci_release_generic_ctl(i5000_pci); 1504 1505 if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL) 1506 return; 1507 1508 /* retrieve references to resources, and free those resources */ 1509 i5000_put_devices(mci); 1510 kobject_put(&mci->edac_mci_kobj); 1511 edac_mc_free(mci); 1512 } 1513 1514 /* 1515 * pci_device_id table for which devices we are looking for 1516 * 1517 * The "E500P" device is the first device supported. 1518 */ 1519 static const struct pci_device_id i5000_pci_tbl[] __devinitdata = { 1520 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I5000_DEV16), 1521 .driver_data = I5000P}, 1522 1523 {0,} /* 0 terminated list. */ 1524 }; 1525 1526 MODULE_DEVICE_TABLE(pci, i5000_pci_tbl); 1527 1528 /* 1529 * i5000_driver pci_driver structure for this module 1530 * 1531 */ 1532 static struct pci_driver i5000_driver = { 1533 .name = KBUILD_BASENAME, 1534 .probe = i5000_init_one, 1535 .remove = __devexit_p(i5000_remove_one), 1536 .id_table = i5000_pci_tbl, 1537 }; 1538 1539 /* 1540 * i5000_init Module entry function 1541 * Try to initialize this module for its devices 1542 */ 1543 static int __init i5000_init(void) 1544 { 1545 int pci_rc; 1546 1547 debugf2("MC: %s: %s()\n", __FILE__, __func__); 1548 1549 /* Ensure that the OPSTATE is set correctly for POLL or NMI */ 1550 opstate_init(); 1551 1552 pci_rc = pci_register_driver(&i5000_driver); 1553 1554 return (pci_rc < 0) ? pci_rc : 0; 1555 } 1556 1557 /* 1558 * i5000_exit() Module exit function 1559 * Unregister the driver 1560 */ 1561 static void __exit i5000_exit(void) 1562 { 1563 debugf2("MC: %s: %s()\n", __FILE__, __func__); 1564 pci_unregister_driver(&i5000_driver); 1565 } 1566 1567 module_init(i5000_init); 1568 module_exit(i5000_exit); 1569 1570 MODULE_LICENSE("GPL"); 1571 MODULE_AUTHOR 1572 ("Linux Networx (http://lnxi.com) Doug Thompson <norsk5@xmission.com>"); 1573 MODULE_DESCRIPTION("MC Driver for Intel I5000 memory controllers - " 1574 I5000_REVISION); 1575 1576 module_param(edac_op_state, int, 0444); 1577 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); 1578 module_param(misc_messages, int, 0444); 1579 MODULE_PARM_DESC(misc_messages, "Log miscellaneous non fatal messages"); 1580 1581