1 /* 2 * Intel 3000/3010 Memory Controller kernel module 3 * Copyright (C) 2007 Akamai Technologies, Inc. 4 * Shamelessly copied from: 5 * Intel D82875P Memory Controller kernel module 6 * (C) 2003 Linux Networx (http://lnxi.com) 7 * 8 * This file may be distributed under the terms of the 9 * GNU General Public License. 10 */ 11 12 #include <linux/module.h> 13 #include <linux/init.h> 14 #include <linux/pci.h> 15 #include <linux/pci_ids.h> 16 #include <linux/edac.h> 17 #include "edac_module.h" 18 19 #define EDAC_MOD_STR "i3000_edac" 20 21 #define I3000_RANKS 8 22 #define I3000_RANKS_PER_CHANNEL 4 23 #define I3000_CHANNELS 2 24 25 /* Intel 3000 register addresses - device 0 function 0 - DRAM Controller */ 26 27 #define I3000_MCHBAR 0x44 /* MCH Memory Mapped Register BAR */ 28 #define I3000_MCHBAR_MASK 0xffffc000 29 #define I3000_MMR_WINDOW_SIZE 16384 30 31 #define I3000_EDEAP 0x70 /* Extended DRAM Error Address Pointer (8b) 32 * 33 * 7:1 reserved 34 * 0 bit 32 of address 35 */ 36 #define I3000_DEAP 0x58 /* DRAM Error Address Pointer (32b) 37 * 38 * 31:7 address 39 * 6:1 reserved 40 * 0 Error channel 0/1 41 */ 42 #define I3000_DEAP_GRAIN (1 << 7) 43 44 /* 45 * Helper functions to decode the DEAP/EDEAP hardware registers. 46 * 47 * The type promotion here is deliberate; we're deriving an 48 * unsigned long pfn and offset from hardware regs which are u8/u32. 49 */ 50 51 static inline unsigned long deap_pfn(u8 edeap, u32 deap) 52 { 53 deap >>= PAGE_SHIFT; 54 deap |= (edeap & 1) << (32 - PAGE_SHIFT); 55 return deap; 56 } 57 58 static inline unsigned long deap_offset(u32 deap) 59 { 60 return deap & ~(I3000_DEAP_GRAIN - 1) & ~PAGE_MASK; 61 } 62 63 static inline int deap_channel(u32 deap) 64 { 65 return deap & 1; 66 } 67 68 #define I3000_DERRSYN 0x5c /* DRAM Error Syndrome (8b) 69 * 70 * 7:0 DRAM ECC Syndrome 71 */ 72 73 #define I3000_ERRSTS 0xc8 /* Error Status Register (16b) 74 * 75 * 15:12 reserved 76 * 11 MCH Thermal Sensor Event 77 * for SMI/SCI/SERR 78 * 10 reserved 79 * 9 LOCK to non-DRAM Memory Flag (LCKF) 80 * 8 Received Refresh Timeout Flag (RRTOF) 81 * 7:2 reserved 82 * 1 Multi-bit DRAM ECC Error Flag (DMERR) 83 * 0 Single-bit DRAM ECC Error Flag (DSERR) 84 */ 85 #define I3000_ERRSTS_BITS 0x0b03 /* bits which indicate errors */ 86 #define I3000_ERRSTS_UE 0x0002 87 #define I3000_ERRSTS_CE 0x0001 88 89 #define I3000_ERRCMD 0xca /* Error Command (16b) 90 * 91 * 15:12 reserved 92 * 11 SERR on MCH Thermal Sensor Event 93 * (TSESERR) 94 * 10 reserved 95 * 9 SERR on LOCK to non-DRAM Memory 96 * (LCKERR) 97 * 8 SERR on DRAM Refresh Timeout 98 * (DRTOERR) 99 * 7:2 reserved 100 * 1 SERR Multi-Bit DRAM ECC Error 101 * (DMERR) 102 * 0 SERR on Single-Bit ECC Error 103 * (DSERR) 104 */ 105 106 /* Intel MMIO register space - device 0 function 0 - MMR space */ 107 108 #define I3000_DRB_SHIFT 25 /* 32MiB grain */ 109 110 #define I3000_C0DRB 0x100 /* Channel 0 DRAM Rank Boundary (8b x 4) 111 * 112 * 7:0 Channel 0 DRAM Rank Boundary Address 113 */ 114 #define I3000_C1DRB 0x180 /* Channel 1 DRAM Rank Boundary (8b x 4) 115 * 116 * 7:0 Channel 1 DRAM Rank Boundary Address 117 */ 118 119 #define I3000_C0DRA 0x108 /* Channel 0 DRAM Rank Attribute (8b x 2) 120 * 121 * 7 reserved 122 * 6:4 DRAM odd Rank Attribute 123 * 3 reserved 124 * 2:0 DRAM even Rank Attribute 125 * 126 * Each attribute defines the page 127 * size of the corresponding rank: 128 * 000: unpopulated 129 * 001: reserved 130 * 010: 4 KB 131 * 011: 8 KB 132 * 100: 16 KB 133 * Others: reserved 134 */ 135 #define I3000_C1DRA 0x188 /* Channel 1 DRAM Rank Attribute (8b x 2) */ 136 137 static inline unsigned char odd_rank_attrib(unsigned char dra) 138 { 139 return (dra & 0x70) >> 4; 140 } 141 142 static inline unsigned char even_rank_attrib(unsigned char dra) 143 { 144 return dra & 0x07; 145 } 146 147 #define I3000_C0DRC0 0x120 /* DRAM Controller Mode 0 (32b) 148 * 149 * 31:30 reserved 150 * 29 Initialization Complete (IC) 151 * 28:11 reserved 152 * 10:8 Refresh Mode Select (RMS) 153 * 7 reserved 154 * 6:4 Mode Select (SMS) 155 * 3:2 reserved 156 * 1:0 DRAM Type (DT) 157 */ 158 159 #define I3000_C0DRC1 0x124 /* DRAM Controller Mode 1 (32b) 160 * 161 * 31 Enhanced Addressing Enable (ENHADE) 162 * 30:0 reserved 163 */ 164 165 enum i3000p_chips { 166 I3000 = 0, 167 }; 168 169 struct i3000_dev_info { 170 const char *ctl_name; 171 }; 172 173 struct i3000_error_info { 174 u16 errsts; 175 u8 derrsyn; 176 u8 edeap; 177 u32 deap; 178 u16 errsts2; 179 }; 180 181 static const struct i3000_dev_info i3000_devs[] = { 182 [I3000] = { 183 .ctl_name = "i3000"}, 184 }; 185 186 static struct pci_dev *mci_pdev; 187 static int i3000_registered = 1; 188 static struct edac_pci_ctl_info *i3000_pci; 189 190 static void i3000_get_error_info(struct mem_ctl_info *mci, 191 struct i3000_error_info *info) 192 { 193 struct pci_dev *pdev; 194 195 pdev = to_pci_dev(mci->pdev); 196 197 /* 198 * This is a mess because there is no atomic way to read all the 199 * registers at once and the registers can transition from CE being 200 * overwritten by UE. 201 */ 202 pci_read_config_word(pdev, I3000_ERRSTS, &info->errsts); 203 if (!(info->errsts & I3000_ERRSTS_BITS)) 204 return; 205 pci_read_config_byte(pdev, I3000_EDEAP, &info->edeap); 206 pci_read_config_dword(pdev, I3000_DEAP, &info->deap); 207 pci_read_config_byte(pdev, I3000_DERRSYN, &info->derrsyn); 208 pci_read_config_word(pdev, I3000_ERRSTS, &info->errsts2); 209 210 /* 211 * If the error is the same for both reads then the first set 212 * of reads is valid. If there is a change then there is a CE 213 * with no info and the second set of reads is valid and 214 * should be UE info. 215 */ 216 if ((info->errsts ^ info->errsts2) & I3000_ERRSTS_BITS) { 217 pci_read_config_byte(pdev, I3000_EDEAP, &info->edeap); 218 pci_read_config_dword(pdev, I3000_DEAP, &info->deap); 219 pci_read_config_byte(pdev, I3000_DERRSYN, &info->derrsyn); 220 } 221 222 /* 223 * Clear any error bits. 224 * (Yes, we really clear bits by writing 1 to them.) 225 */ 226 pci_write_bits16(pdev, I3000_ERRSTS, I3000_ERRSTS_BITS, 227 I3000_ERRSTS_BITS); 228 } 229 230 static int i3000_process_error_info(struct mem_ctl_info *mci, 231 struct i3000_error_info *info, 232 int handle_errors) 233 { 234 int row, multi_chan, channel; 235 unsigned long pfn, offset; 236 237 multi_chan = mci->csrows[0]->nr_channels - 1; 238 239 if (!(info->errsts & I3000_ERRSTS_BITS)) 240 return 0; 241 242 if (!handle_errors) 243 return 1; 244 245 if ((info->errsts ^ info->errsts2) & I3000_ERRSTS_BITS) { 246 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, 247 -1, -1, -1, 248 "UE overwrote CE", ""); 249 info->errsts = info->errsts2; 250 } 251 252 pfn = deap_pfn(info->edeap, info->deap); 253 offset = deap_offset(info->deap); 254 channel = deap_channel(info->deap); 255 256 row = edac_mc_find_csrow_by_page(mci, pfn); 257 258 if (info->errsts & I3000_ERRSTS_UE) 259 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 260 pfn, offset, 0, 261 row, -1, -1, 262 "i3000 UE", ""); 263 else 264 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 265 pfn, offset, info->derrsyn, 266 row, multi_chan ? channel : 0, -1, 267 "i3000 CE", ""); 268 269 return 1; 270 } 271 272 static void i3000_check(struct mem_ctl_info *mci) 273 { 274 struct i3000_error_info info; 275 276 edac_dbg(1, "MC%d\n", mci->mc_idx); 277 i3000_get_error_info(mci, &info); 278 i3000_process_error_info(mci, &info, 1); 279 } 280 281 static int i3000_is_interleaved(const unsigned char *c0dra, 282 const unsigned char *c1dra, 283 const unsigned char *c0drb, 284 const unsigned char *c1drb) 285 { 286 int i; 287 288 /* 289 * If the channels aren't populated identically then 290 * we're not interleaved. 291 */ 292 for (i = 0; i < I3000_RANKS_PER_CHANNEL / 2; i++) 293 if (odd_rank_attrib(c0dra[i]) != odd_rank_attrib(c1dra[i]) || 294 even_rank_attrib(c0dra[i]) != 295 even_rank_attrib(c1dra[i])) 296 return 0; 297 298 /* 299 * If the rank boundaries for the two channels are different 300 * then we're not interleaved. 301 */ 302 for (i = 0; i < I3000_RANKS_PER_CHANNEL; i++) 303 if (c0drb[i] != c1drb[i]) 304 return 0; 305 306 return 1; 307 } 308 309 static int i3000_probe1(struct pci_dev *pdev, int dev_idx) 310 { 311 int rc; 312 int i, j; 313 struct mem_ctl_info *mci = NULL; 314 struct edac_mc_layer layers[2]; 315 unsigned long last_cumul_size, nr_pages; 316 int interleaved, nr_channels; 317 unsigned char dra[I3000_RANKS / 2], drb[I3000_RANKS]; 318 unsigned char *c0dra = dra, *c1dra = &dra[I3000_RANKS_PER_CHANNEL / 2]; 319 unsigned char *c0drb = drb, *c1drb = &drb[I3000_RANKS_PER_CHANNEL]; 320 unsigned long mchbar; 321 void __iomem *window; 322 323 edac_dbg(0, "MC:\n"); 324 325 pci_read_config_dword(pdev, I3000_MCHBAR, (u32 *) & mchbar); 326 mchbar &= I3000_MCHBAR_MASK; 327 window = ioremap_nocache(mchbar, I3000_MMR_WINDOW_SIZE); 328 if (!window) { 329 printk(KERN_ERR "i3000: cannot map mmio space at 0x%lx\n", 330 mchbar); 331 return -ENODEV; 332 } 333 334 c0dra[0] = readb(window + I3000_C0DRA + 0); /* ranks 0,1 */ 335 c0dra[1] = readb(window + I3000_C0DRA + 1); /* ranks 2,3 */ 336 c1dra[0] = readb(window + I3000_C1DRA + 0); /* ranks 0,1 */ 337 c1dra[1] = readb(window + I3000_C1DRA + 1); /* ranks 2,3 */ 338 339 for (i = 0; i < I3000_RANKS_PER_CHANNEL; i++) { 340 c0drb[i] = readb(window + I3000_C0DRB + i); 341 c1drb[i] = readb(window + I3000_C1DRB + i); 342 } 343 344 iounmap(window); 345 346 /* 347 * Figure out how many channels we have. 348 * 349 * If we have what the datasheet calls "asymmetric channels" 350 * (essentially the same as what was called "virtual single 351 * channel mode" in the i82875) then it's a single channel as 352 * far as EDAC is concerned. 353 */ 354 interleaved = i3000_is_interleaved(c0dra, c1dra, c0drb, c1drb); 355 nr_channels = interleaved ? 2 : 1; 356 357 layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; 358 layers[0].size = I3000_RANKS / nr_channels; 359 layers[0].is_virt_csrow = true; 360 layers[1].type = EDAC_MC_LAYER_CHANNEL; 361 layers[1].size = nr_channels; 362 layers[1].is_virt_csrow = false; 363 mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0); 364 if (!mci) 365 return -ENOMEM; 366 367 edac_dbg(3, "MC: init mci\n"); 368 369 mci->pdev = &pdev->dev; 370 mci->mtype_cap = MEM_FLAG_DDR2; 371 372 mci->edac_ctl_cap = EDAC_FLAG_SECDED; 373 mci->edac_cap = EDAC_FLAG_SECDED; 374 375 mci->mod_name = EDAC_MOD_STR; 376 mci->ctl_name = i3000_devs[dev_idx].ctl_name; 377 mci->dev_name = pci_name(pdev); 378 mci->edac_check = i3000_check; 379 mci->ctl_page_to_phys = NULL; 380 381 /* 382 * The dram rank boundary (DRB) reg values are boundary addresses 383 * for each DRAM rank with a granularity of 32MB. DRB regs are 384 * cumulative; the last one will contain the total memory 385 * contained in all ranks. 386 * 387 * If we're in interleaved mode then we're only walking through 388 * the ranks of controller 0, so we double all the values we see. 389 */ 390 for (last_cumul_size = i = 0; i < mci->nr_csrows; i++) { 391 u8 value; 392 u32 cumul_size; 393 struct csrow_info *csrow = mci->csrows[i]; 394 395 value = drb[i]; 396 cumul_size = value << (I3000_DRB_SHIFT - PAGE_SHIFT); 397 if (interleaved) 398 cumul_size <<= 1; 399 edac_dbg(3, "MC: (%d) cumul_size 0x%x\n", i, cumul_size); 400 if (cumul_size == last_cumul_size) 401 continue; 402 403 csrow->first_page = last_cumul_size; 404 csrow->last_page = cumul_size - 1; 405 nr_pages = cumul_size - last_cumul_size; 406 last_cumul_size = cumul_size; 407 408 for (j = 0; j < nr_channels; j++) { 409 struct dimm_info *dimm = csrow->channels[j]->dimm; 410 411 dimm->nr_pages = nr_pages / nr_channels; 412 dimm->grain = I3000_DEAP_GRAIN; 413 dimm->mtype = MEM_DDR2; 414 dimm->dtype = DEV_UNKNOWN; 415 dimm->edac_mode = EDAC_UNKNOWN; 416 } 417 } 418 419 /* 420 * Clear any error bits. 421 * (Yes, we really clear bits by writing 1 to them.) 422 */ 423 pci_write_bits16(pdev, I3000_ERRSTS, I3000_ERRSTS_BITS, 424 I3000_ERRSTS_BITS); 425 426 rc = -ENODEV; 427 if (edac_mc_add_mc(mci)) { 428 edac_dbg(3, "MC: failed edac_mc_add_mc()\n"); 429 goto fail; 430 } 431 432 /* allocating generic PCI control info */ 433 i3000_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); 434 if (!i3000_pci) { 435 printk(KERN_WARNING 436 "%s(): Unable to create PCI control\n", 437 __func__); 438 printk(KERN_WARNING 439 "%s(): PCI error report via EDAC not setup\n", 440 __func__); 441 } 442 443 /* get this far and it's successful */ 444 edac_dbg(3, "MC: success\n"); 445 return 0; 446 447 fail: 448 if (mci) 449 edac_mc_free(mci); 450 451 return rc; 452 } 453 454 /* returns count (>= 0), or negative on error */ 455 static int i3000_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 456 { 457 int rc; 458 459 edac_dbg(0, "MC:\n"); 460 461 if (pci_enable_device(pdev) < 0) 462 return -EIO; 463 464 rc = i3000_probe1(pdev, ent->driver_data); 465 if (!mci_pdev) 466 mci_pdev = pci_dev_get(pdev); 467 468 return rc; 469 } 470 471 static void i3000_remove_one(struct pci_dev *pdev) 472 { 473 struct mem_ctl_info *mci; 474 475 edac_dbg(0, "\n"); 476 477 if (i3000_pci) 478 edac_pci_release_generic_ctl(i3000_pci); 479 480 mci = edac_mc_del_mc(&pdev->dev); 481 if (!mci) 482 return; 483 484 edac_mc_free(mci); 485 } 486 487 static const struct pci_device_id i3000_pci_tbl[] = { 488 { 489 PCI_VEND_DEV(INTEL, 3000_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0, 490 I3000}, 491 { 492 0, 493 } /* 0 terminated list. */ 494 }; 495 496 MODULE_DEVICE_TABLE(pci, i3000_pci_tbl); 497 498 static struct pci_driver i3000_driver = { 499 .name = EDAC_MOD_STR, 500 .probe = i3000_init_one, 501 .remove = i3000_remove_one, 502 .id_table = i3000_pci_tbl, 503 }; 504 505 static int __init i3000_init(void) 506 { 507 int pci_rc; 508 509 edac_dbg(3, "MC:\n"); 510 511 /* Ensure that the OPSTATE is set correctly for POLL or NMI */ 512 opstate_init(); 513 514 pci_rc = pci_register_driver(&i3000_driver); 515 if (pci_rc < 0) 516 goto fail0; 517 518 if (!mci_pdev) { 519 i3000_registered = 0; 520 mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 521 PCI_DEVICE_ID_INTEL_3000_HB, NULL); 522 if (!mci_pdev) { 523 edac_dbg(0, "i3000 pci_get_device fail\n"); 524 pci_rc = -ENODEV; 525 goto fail1; 526 } 527 528 pci_rc = i3000_init_one(mci_pdev, i3000_pci_tbl); 529 if (pci_rc < 0) { 530 edac_dbg(0, "i3000 init fail\n"); 531 pci_rc = -ENODEV; 532 goto fail1; 533 } 534 } 535 536 return 0; 537 538 fail1: 539 pci_unregister_driver(&i3000_driver); 540 541 fail0: 542 pci_dev_put(mci_pdev); 543 544 return pci_rc; 545 } 546 547 static void __exit i3000_exit(void) 548 { 549 edac_dbg(3, "MC:\n"); 550 551 pci_unregister_driver(&i3000_driver); 552 if (!i3000_registered) { 553 i3000_remove_one(mci_pdev); 554 pci_dev_put(mci_pdev); 555 } 556 } 557 558 module_init(i3000_init); 559 module_exit(i3000_exit); 560 561 MODULE_LICENSE("GPL"); 562 MODULE_AUTHOR("Akamai Technologies Arthur Ulfeldt/Jason Uhlenkott"); 563 MODULE_DESCRIPTION("MC support for Intel 3000 memory hub controllers"); 564 565 module_param(edac_op_state, int, 0444); 566 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); 567