xref: /openbmc/linux/drivers/edac/i10nm_base.c (revision 6c33a6f4)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Driver for Intel(R) 10nm server memory controller.
4  * Copyright (c) 2019, Intel Corporation.
5  *
6  */
7 
8 #include <linux/kernel.h>
9 #include <asm/cpu_device_id.h>
10 #include <asm/intel-family.h>
11 #include <asm/mce.h>
12 #include "edac_module.h"
13 #include "skx_common.h"
14 
15 #define I10NM_REVISION	"v0.0.3"
16 #define EDAC_MOD_STR	"i10nm_edac"
17 
18 /* Debug macros */
19 #define i10nm_printk(level, fmt, arg...)	\
20 	edac_printk(level, "i10nm", fmt, ##arg)
21 
22 #define I10NM_GET_SCK_BAR(d, reg)		\
23 	pci_read_config_dword((d)->uracu, 0xd0, &(reg))
24 #define I10NM_GET_IMC_BAR(d, i, reg)	\
25 	pci_read_config_dword((d)->uracu, 0xd8 + (i) * 4, &(reg))
26 #define I10NM_GET_DIMMMTR(m, i, j)	\
27 	(*(u32 *)((m)->mbase + 0x2080c + (i) * 0x4000 + (j) * 4))
28 #define I10NM_GET_MCDDRTCFG(m, i, j)	\
29 	(*(u32 *)((m)->mbase + 0x20970 + (i) * 0x4000 + (j) * 4))
30 
31 #define I10NM_GET_SCK_MMIO_BASE(reg)	(GET_BITFIELD(reg, 0, 28) << 23)
32 #define I10NM_GET_IMC_MMIO_OFFSET(reg)	(GET_BITFIELD(reg, 0, 10) << 12)
33 #define I10NM_GET_IMC_MMIO_SIZE(reg)	((GET_BITFIELD(reg, 13, 23) - \
34 					 GET_BITFIELD(reg, 0, 10) + 1) << 12)
35 
36 static struct list_head *i10nm_edac_list;
37 
38 static struct pci_dev *pci_get_dev_wrapper(int dom, unsigned int bus,
39 					   unsigned int dev, unsigned int fun)
40 {
41 	struct pci_dev *pdev;
42 
43 	pdev = pci_get_domain_bus_and_slot(dom, bus, PCI_DEVFN(dev, fun));
44 	if (!pdev) {
45 		edac_dbg(2, "No device %02x:%02x.%x\n",
46 			 bus, dev, fun);
47 		return NULL;
48 	}
49 
50 	if (unlikely(pci_enable_device(pdev) < 0)) {
51 		edac_dbg(2, "Failed to enable device %02x:%02x.%x\n",
52 			 bus, dev, fun);
53 		return NULL;
54 	}
55 
56 	pci_dev_get(pdev);
57 
58 	return pdev;
59 }
60 
61 static int i10nm_get_all_munits(void)
62 {
63 	struct pci_dev *mdev;
64 	void __iomem *mbase;
65 	unsigned long size;
66 	struct skx_dev *d;
67 	int i, j = 0;
68 	u32 reg, off;
69 	u64 base;
70 
71 	list_for_each_entry(d, i10nm_edac_list, list) {
72 		d->util_all = pci_get_dev_wrapper(d->seg, d->bus[1], 29, 1);
73 		if (!d->util_all)
74 			return -ENODEV;
75 
76 		d->uracu = pci_get_dev_wrapper(d->seg, d->bus[0], 0, 1);
77 		if (!d->uracu)
78 			return -ENODEV;
79 
80 		if (I10NM_GET_SCK_BAR(d, reg)) {
81 			i10nm_printk(KERN_ERR, "Failed to socket bar\n");
82 			return -ENODEV;
83 		}
84 
85 		base = I10NM_GET_SCK_MMIO_BASE(reg);
86 		edac_dbg(2, "socket%d mmio base 0x%llx (reg 0x%x)\n",
87 			 j++, base, reg);
88 
89 		for (i = 0; i < I10NM_NUM_IMC; i++) {
90 			mdev = pci_get_dev_wrapper(d->seg, d->bus[0],
91 						   12 + i, 0);
92 			if (i == 0 && !mdev) {
93 				i10nm_printk(KERN_ERR, "No IMC found\n");
94 				return -ENODEV;
95 			}
96 			if (!mdev)
97 				continue;
98 
99 			d->imc[i].mdev = mdev;
100 
101 			if (I10NM_GET_IMC_BAR(d, i, reg)) {
102 				i10nm_printk(KERN_ERR, "Failed to get mc bar\n");
103 				return -ENODEV;
104 			}
105 
106 			off  = I10NM_GET_IMC_MMIO_OFFSET(reg);
107 			size = I10NM_GET_IMC_MMIO_SIZE(reg);
108 			edac_dbg(2, "mc%d mmio base 0x%llx size 0x%lx (reg 0x%x)\n",
109 				 i, base + off, size, reg);
110 
111 			mbase = ioremap(base + off, size);
112 			if (!mbase) {
113 				i10nm_printk(KERN_ERR, "Failed to ioremap 0x%llx\n",
114 					     base + off);
115 				return -ENODEV;
116 			}
117 
118 			d->imc[i].mbase = mbase;
119 		}
120 	}
121 
122 	return 0;
123 }
124 
125 static const struct x86_cpu_id i10nm_cpuids[] = {
126 	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_TREMONT_D, 0, 0 },
127 	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ICELAKE_X, 0, 0 },
128 	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ICELAKE_D, 0, 0 },
129 	{ }
130 };
131 MODULE_DEVICE_TABLE(x86cpu, i10nm_cpuids);
132 
133 static bool i10nm_check_ecc(struct skx_imc *imc, int chan)
134 {
135 	u32 mcmtr;
136 
137 	mcmtr = *(u32 *)(imc->mbase + 0x20ef8 + chan * 0x4000);
138 	edac_dbg(1, "ch%d mcmtr reg %x\n", chan, mcmtr);
139 
140 	return !!GET_BITFIELD(mcmtr, 2, 2);
141 }
142 
143 static int i10nm_get_dimm_config(struct mem_ctl_info *mci)
144 {
145 	struct skx_pvt *pvt = mci->pvt_info;
146 	struct skx_imc *imc = pvt->imc;
147 	struct dimm_info *dimm;
148 	u32 mtr, mcddrtcfg;
149 	int i, j, ndimms;
150 
151 	for (i = 0; i < I10NM_NUM_CHANNELS; i++) {
152 		if (!imc->mbase)
153 			continue;
154 
155 		ndimms = 0;
156 		for (j = 0; j < I10NM_NUM_DIMMS; j++) {
157 			dimm = edac_get_dimm(mci, i, j, 0);
158 			mtr = I10NM_GET_DIMMMTR(imc, i, j);
159 			mcddrtcfg = I10NM_GET_MCDDRTCFG(imc, i, j);
160 			edac_dbg(1, "dimmmtr 0x%x mcddrtcfg 0x%x (mc%d ch%d dimm%d)\n",
161 				 mtr, mcddrtcfg, imc->mc, i, j);
162 
163 			if (IS_DIMM_PRESENT(mtr))
164 				ndimms += skx_get_dimm_info(mtr, 0, dimm,
165 							    imc, i, j);
166 			else if (IS_NVDIMM_PRESENT(mcddrtcfg, j))
167 				ndimms += skx_get_nvdimm_info(dimm, imc, i, j,
168 							      EDAC_MOD_STR);
169 		}
170 		if (ndimms && !i10nm_check_ecc(imc, i)) {
171 			i10nm_printk(KERN_ERR, "ECC is disabled on imc %d channel %d\n",
172 				     imc->mc, i);
173 			return -ENODEV;
174 		}
175 	}
176 
177 	return 0;
178 }
179 
180 static struct notifier_block i10nm_mce_dec = {
181 	.notifier_call	= skx_mce_check_error,
182 	.priority	= MCE_PRIO_EDAC,
183 };
184 
185 #ifdef CONFIG_EDAC_DEBUG
186 /*
187  * Debug feature.
188  * Exercise the address decode logic by writing an address to
189  * /sys/kernel/debug/edac/i10nm_test/addr.
190  */
191 static struct dentry *i10nm_test;
192 
193 static int debugfs_u64_set(void *data, u64 val)
194 {
195 	struct mce m;
196 
197 	pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val);
198 
199 	memset(&m, 0, sizeof(m));
200 	/* ADDRV + MemRd + Unknown channel */
201 	m.status = MCI_STATUS_ADDRV + 0x90;
202 	/* One corrected error */
203 	m.status |= BIT_ULL(MCI_STATUS_CEC_SHIFT);
204 	m.addr = val;
205 	skx_mce_check_error(NULL, 0, &m);
206 
207 	return 0;
208 }
209 DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
210 
211 static void setup_i10nm_debug(void)
212 {
213 	i10nm_test = edac_debugfs_create_dir("i10nm_test");
214 	if (!i10nm_test)
215 		return;
216 
217 	if (!edac_debugfs_create_file("addr", 0200, i10nm_test,
218 				      NULL, &fops_u64_wo)) {
219 		debugfs_remove(i10nm_test);
220 		i10nm_test = NULL;
221 	}
222 }
223 
224 static void teardown_i10nm_debug(void)
225 {
226 	debugfs_remove_recursive(i10nm_test);
227 }
228 #else
229 static inline void setup_i10nm_debug(void) {}
230 static inline void teardown_i10nm_debug(void) {}
231 #endif /*CONFIG_EDAC_DEBUG*/
232 
233 static int __init i10nm_init(void)
234 {
235 	u8 mc = 0, src_id = 0, node_id = 0;
236 	const struct x86_cpu_id *id;
237 	const char *owner;
238 	struct skx_dev *d;
239 	int rc, i, off[3] = {0xd0, 0xc8, 0xcc};
240 	u64 tolm, tohm;
241 
242 	edac_dbg(2, "\n");
243 
244 	owner = edac_get_owner();
245 	if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
246 		return -EBUSY;
247 
248 	id = x86_match_cpu(i10nm_cpuids);
249 	if (!id)
250 		return -ENODEV;
251 
252 	rc = skx_get_hi_lo(0x09a2, off, &tolm, &tohm);
253 	if (rc)
254 		return rc;
255 
256 	rc = skx_get_all_bus_mappings(0x3452, 0xcc, I10NM, &i10nm_edac_list);
257 	if (rc < 0)
258 		goto fail;
259 	if (rc == 0) {
260 		i10nm_printk(KERN_ERR, "No memory controllers found\n");
261 		return -ENODEV;
262 	}
263 
264 	rc = i10nm_get_all_munits();
265 	if (rc < 0)
266 		goto fail;
267 
268 	list_for_each_entry(d, i10nm_edac_list, list) {
269 		rc = skx_get_src_id(d, 0xf8, &src_id);
270 		if (rc < 0)
271 			goto fail;
272 
273 		rc = skx_get_node_id(d, &node_id);
274 		if (rc < 0)
275 			goto fail;
276 
277 		edac_dbg(2, "src_id = %d node_id = %d\n", src_id, node_id);
278 		for (i = 0; i < I10NM_NUM_IMC; i++) {
279 			if (!d->imc[i].mdev)
280 				continue;
281 
282 			d->imc[i].mc  = mc++;
283 			d->imc[i].lmc = i;
284 			d->imc[i].src_id  = src_id;
285 			d->imc[i].node_id = node_id;
286 
287 			rc = skx_register_mci(&d->imc[i], d->imc[i].mdev,
288 					      "Intel_10nm Socket", EDAC_MOD_STR,
289 					      i10nm_get_dimm_config);
290 			if (rc < 0)
291 				goto fail;
292 		}
293 	}
294 
295 	rc = skx_adxl_get();
296 	if (rc)
297 		goto fail;
298 
299 	opstate_init();
300 	mce_register_decode_chain(&i10nm_mce_dec);
301 	setup_i10nm_debug();
302 
303 	i10nm_printk(KERN_INFO, "%s\n", I10NM_REVISION);
304 
305 	return 0;
306 fail:
307 	skx_remove();
308 	return rc;
309 }
310 
311 static void __exit i10nm_exit(void)
312 {
313 	edac_dbg(2, "\n");
314 	teardown_i10nm_debug();
315 	mce_unregister_decode_chain(&i10nm_mce_dec);
316 	skx_adxl_put();
317 	skx_remove();
318 }
319 
320 module_init(i10nm_init);
321 module_exit(i10nm_exit);
322 
323 MODULE_LICENSE("GPL v2");
324 MODULE_DESCRIPTION("MC Driver for Intel 10nm server processors");
325