1 /* 2 * cpc925_edac.c, EDAC driver for IBM CPC925 Bridge and Memory Controller. 3 * 4 * Copyright (c) 2008 Wind River Systems, Inc. 5 * 6 * Authors: Cao Qingtao <qingtao.cao@windriver.com> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 15 * See the GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 20 */ 21 22 #include <linux/module.h> 23 #include <linux/init.h> 24 #include <linux/io.h> 25 #include <linux/edac.h> 26 #include <linux/of.h> 27 #include <linux/platform_device.h> 28 #include <linux/gfp.h> 29 30 #include "edac_core.h" 31 #include "edac_module.h" 32 33 #define CPC925_EDAC_REVISION " Ver: 1.0.0" 34 #define CPC925_EDAC_MOD_STR "cpc925_edac" 35 36 #define cpc925_printk(level, fmt, arg...) \ 37 edac_printk(level, "CPC925", fmt, ##arg) 38 39 #define cpc925_mc_printk(mci, level, fmt, arg...) \ 40 edac_mc_chipset_printk(mci, level, "CPC925", fmt, ##arg) 41 42 /* 43 * CPC925 registers are of 32 bits with bit0 defined at the 44 * most significant bit and bit31 at that of least significant. 45 */ 46 #define CPC925_BITS_PER_REG 32 47 #define CPC925_BIT(nr) (1UL << (CPC925_BITS_PER_REG - 1 - nr)) 48 49 /* 50 * EDAC device names for the error detections of 51 * CPU Interface and Hypertransport Link. 52 */ 53 #define CPC925_CPU_ERR_DEV "cpu" 54 #define CPC925_HT_LINK_DEV "htlink" 55 56 /* Suppose DDR Refresh cycle is 15.6 microsecond */ 57 #define CPC925_REF_FREQ 0xFA69 58 #define CPC925_SCRUB_BLOCK_SIZE 64 /* bytes */ 59 #define CPC925_NR_CSROWS 8 60 61 /* 62 * All registers and bits definitions are taken from 63 * "CPC925 Bridge and Memory Controller User Manual, SA14-2761-02". 64 */ 65 66 /* 67 * CPU and Memory Controller Registers 68 */ 69 /************************************************************ 70 * Processor Interface Exception Mask Register (APIMASK) 71 ************************************************************/ 72 #define REG_APIMASK_OFFSET 0x30070 73 enum apimask_bits { 74 APIMASK_DART = CPC925_BIT(0), /* DART Exception */ 75 APIMASK_ADI0 = CPC925_BIT(1), /* Handshake Error on PI0_ADI */ 76 APIMASK_ADI1 = CPC925_BIT(2), /* Handshake Error on PI1_ADI */ 77 APIMASK_STAT = CPC925_BIT(3), /* Status Exception */ 78 APIMASK_DERR = CPC925_BIT(4), /* Data Error Exception */ 79 APIMASK_ADRS0 = CPC925_BIT(5), /* Addressing Exception on PI0 */ 80 APIMASK_ADRS1 = CPC925_BIT(6), /* Addressing Exception on PI1 */ 81 /* BIT(7) Reserved */ 82 APIMASK_ECC_UE_H = CPC925_BIT(8), /* UECC upper */ 83 APIMASK_ECC_CE_H = CPC925_BIT(9), /* CECC upper */ 84 APIMASK_ECC_UE_L = CPC925_BIT(10), /* UECC lower */ 85 APIMASK_ECC_CE_L = CPC925_BIT(11), /* CECC lower */ 86 87 CPU_MASK_ENABLE = (APIMASK_DART | APIMASK_ADI0 | APIMASK_ADI1 | 88 APIMASK_STAT | APIMASK_DERR | APIMASK_ADRS0 | 89 APIMASK_ADRS1), 90 ECC_MASK_ENABLE = (APIMASK_ECC_UE_H | APIMASK_ECC_CE_H | 91 APIMASK_ECC_UE_L | APIMASK_ECC_CE_L), 92 }; 93 #define APIMASK_ADI(n) CPC925_BIT(((n)+1)) 94 95 /************************************************************ 96 * Processor Interface Exception Register (APIEXCP) 97 ************************************************************/ 98 #define REG_APIEXCP_OFFSET 0x30060 99 enum apiexcp_bits { 100 APIEXCP_DART = CPC925_BIT(0), /* DART Exception */ 101 APIEXCP_ADI0 = CPC925_BIT(1), /* Handshake Error on PI0_ADI */ 102 APIEXCP_ADI1 = CPC925_BIT(2), /* Handshake Error on PI1_ADI */ 103 APIEXCP_STAT = CPC925_BIT(3), /* Status Exception */ 104 APIEXCP_DERR = CPC925_BIT(4), /* Data Error Exception */ 105 APIEXCP_ADRS0 = CPC925_BIT(5), /* Addressing Exception on PI0 */ 106 APIEXCP_ADRS1 = CPC925_BIT(6), /* Addressing Exception on PI1 */ 107 /* BIT(7) Reserved */ 108 APIEXCP_ECC_UE_H = CPC925_BIT(8), /* UECC upper */ 109 APIEXCP_ECC_CE_H = CPC925_BIT(9), /* CECC upper */ 110 APIEXCP_ECC_UE_L = CPC925_BIT(10), /* UECC lower */ 111 APIEXCP_ECC_CE_L = CPC925_BIT(11), /* CECC lower */ 112 113 CPU_EXCP_DETECTED = (APIEXCP_DART | APIEXCP_ADI0 | APIEXCP_ADI1 | 114 APIEXCP_STAT | APIEXCP_DERR | APIEXCP_ADRS0 | 115 APIEXCP_ADRS1), 116 UECC_EXCP_DETECTED = (APIEXCP_ECC_UE_H | APIEXCP_ECC_UE_L), 117 CECC_EXCP_DETECTED = (APIEXCP_ECC_CE_H | APIEXCP_ECC_CE_L), 118 ECC_EXCP_DETECTED = (UECC_EXCP_DETECTED | CECC_EXCP_DETECTED), 119 }; 120 121 /************************************************************ 122 * Memory Bus Configuration Register (MBCR) 123 ************************************************************/ 124 #define REG_MBCR_OFFSET 0x2190 125 #define MBCR_64BITCFG_SHIFT 23 126 #define MBCR_64BITCFG_MASK (1UL << MBCR_64BITCFG_SHIFT) 127 #define MBCR_64BITBUS_SHIFT 22 128 #define MBCR_64BITBUS_MASK (1UL << MBCR_64BITBUS_SHIFT) 129 130 /************************************************************ 131 * Memory Bank Mode Register (MBMR) 132 ************************************************************/ 133 #define REG_MBMR_OFFSET 0x21C0 134 #define MBMR_MODE_MAX_VALUE 0xF 135 #define MBMR_MODE_SHIFT 25 136 #define MBMR_MODE_MASK (MBMR_MODE_MAX_VALUE << MBMR_MODE_SHIFT) 137 #define MBMR_BBA_SHIFT 24 138 #define MBMR_BBA_MASK (1UL << MBMR_BBA_SHIFT) 139 140 /************************************************************ 141 * Memory Bank Boundary Address Register (MBBAR) 142 ************************************************************/ 143 #define REG_MBBAR_OFFSET 0x21D0 144 #define MBBAR_BBA_MAX_VALUE 0xFF 145 #define MBBAR_BBA_SHIFT 24 146 #define MBBAR_BBA_MASK (MBBAR_BBA_MAX_VALUE << MBBAR_BBA_SHIFT) 147 148 /************************************************************ 149 * Memory Scrub Control Register (MSCR) 150 ************************************************************/ 151 #define REG_MSCR_OFFSET 0x2400 152 #define MSCR_SCRUB_MOD_MASK 0xC0000000 /* scrub_mod - bit0:1*/ 153 #define MSCR_BACKGR_SCRUB 0x40000000 /* 01 */ 154 #define MSCR_SI_SHIFT 16 /* si - bit8:15*/ 155 #define MSCR_SI_MAX_VALUE 0xFF 156 #define MSCR_SI_MASK (MSCR_SI_MAX_VALUE << MSCR_SI_SHIFT) 157 158 /************************************************************ 159 * Memory Scrub Range Start Register (MSRSR) 160 ************************************************************/ 161 #define REG_MSRSR_OFFSET 0x2410 162 163 /************************************************************ 164 * Memory Scrub Range End Register (MSRER) 165 ************************************************************/ 166 #define REG_MSRER_OFFSET 0x2420 167 168 /************************************************************ 169 * Memory Scrub Pattern Register (MSPR) 170 ************************************************************/ 171 #define REG_MSPR_OFFSET 0x2430 172 173 /************************************************************ 174 * Memory Check Control Register (MCCR) 175 ************************************************************/ 176 #define REG_MCCR_OFFSET 0x2440 177 enum mccr_bits { 178 MCCR_ECC_EN = CPC925_BIT(0), /* ECC high and low check */ 179 }; 180 181 /************************************************************ 182 * Memory Check Range End Register (MCRER) 183 ************************************************************/ 184 #define REG_MCRER_OFFSET 0x2450 185 186 /************************************************************ 187 * Memory Error Address Register (MEAR) 188 ************************************************************/ 189 #define REG_MEAR_OFFSET 0x2460 190 #define MEAR_BCNT_MAX_VALUE 0x3 191 #define MEAR_BCNT_SHIFT 30 192 #define MEAR_BCNT_MASK (MEAR_BCNT_MAX_VALUE << MEAR_BCNT_SHIFT) 193 #define MEAR_RANK_MAX_VALUE 0x7 194 #define MEAR_RANK_SHIFT 27 195 #define MEAR_RANK_MASK (MEAR_RANK_MAX_VALUE << MEAR_RANK_SHIFT) 196 #define MEAR_COL_MAX_VALUE 0x7FF 197 #define MEAR_COL_SHIFT 16 198 #define MEAR_COL_MASK (MEAR_COL_MAX_VALUE << MEAR_COL_SHIFT) 199 #define MEAR_BANK_MAX_VALUE 0x3 200 #define MEAR_BANK_SHIFT 14 201 #define MEAR_BANK_MASK (MEAR_BANK_MAX_VALUE << MEAR_BANK_SHIFT) 202 #define MEAR_ROW_MASK 0x00003FFF 203 204 /************************************************************ 205 * Memory Error Syndrome Register (MESR) 206 ************************************************************/ 207 #define REG_MESR_OFFSET 0x2470 208 #define MESR_ECC_SYN_H_MASK 0xFF00 209 #define MESR_ECC_SYN_L_MASK 0x00FF 210 211 /************************************************************ 212 * Memory Mode Control Register (MMCR) 213 ************************************************************/ 214 #define REG_MMCR_OFFSET 0x2500 215 enum mmcr_bits { 216 MMCR_REG_DIMM_MODE = CPC925_BIT(3), 217 }; 218 219 /* 220 * HyperTransport Link Registers 221 */ 222 /************************************************************ 223 * Error Handling/Enumeration Scratch Pad Register (ERRCTRL) 224 ************************************************************/ 225 #define REG_ERRCTRL_OFFSET 0x70140 226 enum errctrl_bits { /* nonfatal interrupts for */ 227 ERRCTRL_SERR_NF = CPC925_BIT(0), /* system error */ 228 ERRCTRL_CRC_NF = CPC925_BIT(1), /* CRC error */ 229 ERRCTRL_RSP_NF = CPC925_BIT(2), /* Response error */ 230 ERRCTRL_EOC_NF = CPC925_BIT(3), /* End-Of-Chain error */ 231 ERRCTRL_OVF_NF = CPC925_BIT(4), /* Overflow error */ 232 ERRCTRL_PROT_NF = CPC925_BIT(5), /* Protocol error */ 233 234 ERRCTRL_RSP_ERR = CPC925_BIT(6), /* Response error received */ 235 ERRCTRL_CHN_FAL = CPC925_BIT(7), /* Sync flooding detected */ 236 237 HT_ERRCTRL_ENABLE = (ERRCTRL_SERR_NF | ERRCTRL_CRC_NF | 238 ERRCTRL_RSP_NF | ERRCTRL_EOC_NF | 239 ERRCTRL_OVF_NF | ERRCTRL_PROT_NF), 240 HT_ERRCTRL_DETECTED = (ERRCTRL_RSP_ERR | ERRCTRL_CHN_FAL), 241 }; 242 243 /************************************************************ 244 * Link Configuration and Link Control Register (LINKCTRL) 245 ************************************************************/ 246 #define REG_LINKCTRL_OFFSET 0x70110 247 enum linkctrl_bits { 248 LINKCTRL_CRC_ERR = (CPC925_BIT(22) | CPC925_BIT(23)), 249 LINKCTRL_LINK_FAIL = CPC925_BIT(27), 250 251 HT_LINKCTRL_DETECTED = (LINKCTRL_CRC_ERR | LINKCTRL_LINK_FAIL), 252 }; 253 254 /************************************************************ 255 * Link FreqCap/Error/Freq/Revision ID Register (LINKERR) 256 ************************************************************/ 257 #define REG_LINKERR_OFFSET 0x70120 258 enum linkerr_bits { 259 LINKERR_EOC_ERR = CPC925_BIT(17), /* End-Of-Chain error */ 260 LINKERR_OVF_ERR = CPC925_BIT(18), /* Receive Buffer Overflow */ 261 LINKERR_PROT_ERR = CPC925_BIT(19), /* Protocol error */ 262 263 HT_LINKERR_DETECTED = (LINKERR_EOC_ERR | LINKERR_OVF_ERR | 264 LINKERR_PROT_ERR), 265 }; 266 267 /************************************************************ 268 * Bridge Control Register (BRGCTRL) 269 ************************************************************/ 270 #define REG_BRGCTRL_OFFSET 0x70300 271 enum brgctrl_bits { 272 BRGCTRL_DETSERR = CPC925_BIT(0), /* SERR on Secondary Bus */ 273 BRGCTRL_SECBUSRESET = CPC925_BIT(9), /* Secondary Bus Reset */ 274 }; 275 276 /* Private structure for edac memory controller */ 277 struct cpc925_mc_pdata { 278 void __iomem *vbase; 279 unsigned long total_mem; 280 const char *name; 281 int edac_idx; 282 }; 283 284 /* Private structure for common edac device */ 285 struct cpc925_dev_info { 286 void __iomem *vbase; 287 struct platform_device *pdev; 288 char *ctl_name; 289 int edac_idx; 290 struct edac_device_ctl_info *edac_dev; 291 void (*init)(struct cpc925_dev_info *dev_info); 292 void (*exit)(struct cpc925_dev_info *dev_info); 293 void (*check)(struct edac_device_ctl_info *edac_dev); 294 }; 295 296 /* Get total memory size from Open Firmware DTB */ 297 static void get_total_mem(struct cpc925_mc_pdata *pdata) 298 { 299 struct device_node *np = NULL; 300 const unsigned int *reg, *reg_end; 301 int len, sw, aw; 302 unsigned long start, size; 303 304 np = of_find_node_by_type(NULL, "memory"); 305 if (!np) 306 return; 307 308 aw = of_n_addr_cells(np); 309 sw = of_n_size_cells(np); 310 reg = (const unsigned int *)of_get_property(np, "reg", &len); 311 reg_end = reg + len/4; 312 313 pdata->total_mem = 0; 314 do { 315 start = of_read_number(reg, aw); 316 reg += aw; 317 size = of_read_number(reg, sw); 318 reg += sw; 319 edac_dbg(1, "start 0x%lx, size 0x%lx\n", start, size); 320 pdata->total_mem += size; 321 } while (reg < reg_end); 322 323 of_node_put(np); 324 edac_dbg(0, "total_mem 0x%lx\n", pdata->total_mem); 325 } 326 327 static void cpc925_init_csrows(struct mem_ctl_info *mci) 328 { 329 struct cpc925_mc_pdata *pdata = mci->pvt_info; 330 struct csrow_info *csrow; 331 struct dimm_info *dimm; 332 enum dev_type dtype; 333 int index, j; 334 u32 mbmr, mbbar, bba, grain; 335 unsigned long row_size, nr_pages, last_nr_pages = 0; 336 337 get_total_mem(pdata); 338 339 for (index = 0; index < mci->nr_csrows; index++) { 340 mbmr = __raw_readl(pdata->vbase + REG_MBMR_OFFSET + 341 0x20 * index); 342 mbbar = __raw_readl(pdata->vbase + REG_MBBAR_OFFSET + 343 0x20 + index); 344 bba = (((mbmr & MBMR_BBA_MASK) >> MBMR_BBA_SHIFT) << 8) | 345 ((mbbar & MBBAR_BBA_MASK) >> MBBAR_BBA_SHIFT); 346 347 if (bba == 0) 348 continue; /* not populated */ 349 350 csrow = mci->csrows[index]; 351 352 row_size = bba * (1UL << 28); /* 256M */ 353 csrow->first_page = last_nr_pages; 354 nr_pages = row_size >> PAGE_SHIFT; 355 csrow->last_page = csrow->first_page + nr_pages - 1; 356 last_nr_pages = csrow->last_page + 1; 357 358 switch (csrow->nr_channels) { 359 case 1: /* Single channel */ 360 grain = 32; /* four-beat burst of 32 bytes */ 361 break; 362 case 2: /* Dual channel */ 363 default: 364 grain = 64; /* four-beat burst of 64 bytes */ 365 break; 366 } 367 switch ((mbmr & MBMR_MODE_MASK) >> MBMR_MODE_SHIFT) { 368 case 6: /* 0110, no way to differentiate X8 VS X16 */ 369 case 5: /* 0101 */ 370 case 8: /* 1000 */ 371 dtype = DEV_X16; 372 break; 373 case 7: /* 0111 */ 374 case 9: /* 1001 */ 375 dtype = DEV_X8; 376 break; 377 default: 378 dtype = DEV_UNKNOWN; 379 break; 380 } 381 for (j = 0; j < csrow->nr_channels; j++) { 382 dimm = csrow->channels[j]->dimm; 383 dimm->nr_pages = nr_pages / csrow->nr_channels; 384 dimm->mtype = MEM_RDDR; 385 dimm->edac_mode = EDAC_SECDED; 386 dimm->grain = grain; 387 dimm->dtype = dtype; 388 } 389 } 390 } 391 392 /* Enable memory controller ECC detection */ 393 static void cpc925_mc_init(struct mem_ctl_info *mci) 394 { 395 struct cpc925_mc_pdata *pdata = mci->pvt_info; 396 u32 apimask; 397 u32 mccr; 398 399 /* Enable various ECC error exceptions */ 400 apimask = __raw_readl(pdata->vbase + REG_APIMASK_OFFSET); 401 if ((apimask & ECC_MASK_ENABLE) == 0) { 402 apimask |= ECC_MASK_ENABLE; 403 __raw_writel(apimask, pdata->vbase + REG_APIMASK_OFFSET); 404 } 405 406 /* Enable ECC detection */ 407 mccr = __raw_readl(pdata->vbase + REG_MCCR_OFFSET); 408 if ((mccr & MCCR_ECC_EN) == 0) { 409 mccr |= MCCR_ECC_EN; 410 __raw_writel(mccr, pdata->vbase + REG_MCCR_OFFSET); 411 } 412 } 413 414 /* Disable memory controller ECC detection */ 415 static void cpc925_mc_exit(struct mem_ctl_info *mci) 416 { 417 /* 418 * WARNING: 419 * We are supposed to clear the ECC error detection bits, 420 * and it will be no problem to do so. However, once they 421 * are cleared here if we want to re-install CPC925 EDAC 422 * module later, setting them up in cpc925_mc_init() will 423 * trigger machine check exception. 424 * Also, it's ok to leave ECC error detection bits enabled, 425 * since they are reset to 1 by default or by boot loader. 426 */ 427 428 return; 429 } 430 431 /* 432 * Revert DDR column/row/bank addresses into page frame number and 433 * offset in page. 434 * 435 * Suppose memory mode is 0x0111(128-bit mode, identical DIMM pairs), 436 * physical address(PA) bits to column address(CA) bits mappings are: 437 * CA 0 1 2 3 4 5 6 7 8 9 10 438 * PA 59 58 57 56 55 54 53 52 51 50 49 439 * 440 * physical address(PA) bits to bank address(BA) bits mappings are: 441 * BA 0 1 442 * PA 43 44 443 * 444 * physical address(PA) bits to row address(RA) bits mappings are: 445 * RA 0 1 2 3 4 5 6 7 8 9 10 11 12 446 * PA 36 35 34 48 47 46 45 40 41 42 39 38 37 447 */ 448 static void cpc925_mc_get_pfn(struct mem_ctl_info *mci, u32 mear, 449 unsigned long *pfn, unsigned long *offset, int *csrow) 450 { 451 u32 bcnt, rank, col, bank, row; 452 u32 c; 453 unsigned long pa; 454 int i; 455 456 bcnt = (mear & MEAR_BCNT_MASK) >> MEAR_BCNT_SHIFT; 457 rank = (mear & MEAR_RANK_MASK) >> MEAR_RANK_SHIFT; 458 col = (mear & MEAR_COL_MASK) >> MEAR_COL_SHIFT; 459 bank = (mear & MEAR_BANK_MASK) >> MEAR_BANK_SHIFT; 460 row = mear & MEAR_ROW_MASK; 461 462 *csrow = rank; 463 464 #ifdef CONFIG_EDAC_DEBUG 465 if (mci->csrows[rank]->first_page == 0) { 466 cpc925_mc_printk(mci, KERN_ERR, "ECC occurs in a " 467 "non-populated csrow, broken hardware?\n"); 468 return; 469 } 470 #endif 471 472 /* Revert csrow number */ 473 pa = mci->csrows[rank]->first_page << PAGE_SHIFT; 474 475 /* Revert column address */ 476 col += bcnt; 477 for (i = 0; i < 11; i++) { 478 c = col & 0x1; 479 col >>= 1; 480 pa |= c << (14 - i); 481 } 482 483 /* Revert bank address */ 484 pa |= bank << 19; 485 486 /* Revert row address, in 4 steps */ 487 for (i = 0; i < 3; i++) { 488 c = row & 0x1; 489 row >>= 1; 490 pa |= c << (26 - i); 491 } 492 493 for (i = 0; i < 3; i++) { 494 c = row & 0x1; 495 row >>= 1; 496 pa |= c << (21 + i); 497 } 498 499 for (i = 0; i < 4; i++) { 500 c = row & 0x1; 501 row >>= 1; 502 pa |= c << (18 - i); 503 } 504 505 for (i = 0; i < 3; i++) { 506 c = row & 0x1; 507 row >>= 1; 508 pa |= c << (29 - i); 509 } 510 511 *offset = pa & (PAGE_SIZE - 1); 512 *pfn = pa >> PAGE_SHIFT; 513 514 edac_dbg(0, "ECC physical address 0x%lx\n", pa); 515 } 516 517 static int cpc925_mc_find_channel(struct mem_ctl_info *mci, u16 syndrome) 518 { 519 if ((syndrome & MESR_ECC_SYN_H_MASK) == 0) 520 return 0; 521 522 if ((syndrome & MESR_ECC_SYN_L_MASK) == 0) 523 return 1; 524 525 cpc925_mc_printk(mci, KERN_INFO, "Unexpected syndrome value: 0x%x\n", 526 syndrome); 527 return 1; 528 } 529 530 /* Check memory controller registers for ECC errors */ 531 static void cpc925_mc_check(struct mem_ctl_info *mci) 532 { 533 struct cpc925_mc_pdata *pdata = mci->pvt_info; 534 u32 apiexcp; 535 u32 mear; 536 u32 mesr; 537 u16 syndrome; 538 unsigned long pfn = 0, offset = 0; 539 int csrow = 0, channel = 0; 540 541 /* APIEXCP is cleared when read */ 542 apiexcp = __raw_readl(pdata->vbase + REG_APIEXCP_OFFSET); 543 if ((apiexcp & ECC_EXCP_DETECTED) == 0) 544 return; 545 546 mesr = __raw_readl(pdata->vbase + REG_MESR_OFFSET); 547 syndrome = mesr | (MESR_ECC_SYN_H_MASK | MESR_ECC_SYN_L_MASK); 548 549 mear = __raw_readl(pdata->vbase + REG_MEAR_OFFSET); 550 551 /* Revert column/row addresses into page frame number, etc */ 552 cpc925_mc_get_pfn(mci, mear, &pfn, &offset, &csrow); 553 554 if (apiexcp & CECC_EXCP_DETECTED) { 555 cpc925_mc_printk(mci, KERN_INFO, "DRAM CECC Fault\n"); 556 channel = cpc925_mc_find_channel(mci, syndrome); 557 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 558 pfn, offset, syndrome, 559 csrow, channel, -1, 560 mci->ctl_name, ""); 561 } 562 563 if (apiexcp & UECC_EXCP_DETECTED) { 564 cpc925_mc_printk(mci, KERN_INFO, "DRAM UECC Fault\n"); 565 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 566 pfn, offset, 0, 567 csrow, -1, -1, 568 mci->ctl_name, ""); 569 } 570 571 cpc925_mc_printk(mci, KERN_INFO, "Dump registers:\n"); 572 cpc925_mc_printk(mci, KERN_INFO, "APIMASK 0x%08x\n", 573 __raw_readl(pdata->vbase + REG_APIMASK_OFFSET)); 574 cpc925_mc_printk(mci, KERN_INFO, "APIEXCP 0x%08x\n", 575 apiexcp); 576 cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Ctrl 0x%08x\n", 577 __raw_readl(pdata->vbase + REG_MSCR_OFFSET)); 578 cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge Start 0x%08x\n", 579 __raw_readl(pdata->vbase + REG_MSRSR_OFFSET)); 580 cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge End 0x%08x\n", 581 __raw_readl(pdata->vbase + REG_MSRER_OFFSET)); 582 cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Pattern 0x%08x\n", 583 __raw_readl(pdata->vbase + REG_MSPR_OFFSET)); 584 cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Ctrl 0x%08x\n", 585 __raw_readl(pdata->vbase + REG_MCCR_OFFSET)); 586 cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Rge End 0x%08x\n", 587 __raw_readl(pdata->vbase + REG_MCRER_OFFSET)); 588 cpc925_mc_printk(mci, KERN_INFO, "Mem Err Address 0x%08x\n", 589 mesr); 590 cpc925_mc_printk(mci, KERN_INFO, "Mem Err Syndrome 0x%08x\n", 591 syndrome); 592 } 593 594 /******************** CPU err device********************************/ 595 static u32 cpc925_cpu_mask_disabled(void) 596 { 597 struct device_node *cpus; 598 struct device_node *cpunode = NULL; 599 static u32 mask = 0; 600 601 /* use cached value if available */ 602 if (mask != 0) 603 return mask; 604 605 mask = APIMASK_ADI0 | APIMASK_ADI1; 606 607 cpus = of_find_node_by_path("/cpus"); 608 if (cpus == NULL) { 609 cpc925_printk(KERN_DEBUG, "No /cpus node !\n"); 610 return 0; 611 } 612 613 while ((cpunode = of_get_next_child(cpus, cpunode)) != NULL) { 614 const u32 *reg = of_get_property(cpunode, "reg", NULL); 615 616 if (strcmp(cpunode->type, "cpu")) { 617 cpc925_printk(KERN_ERR, "Not a cpu node in /cpus: %s\n", cpunode->name); 618 continue; 619 } 620 621 if (reg == NULL || *reg > 2) { 622 cpc925_printk(KERN_ERR, "Bad reg value at %s\n", cpunode->full_name); 623 continue; 624 } 625 626 mask &= ~APIMASK_ADI(*reg); 627 } 628 629 if (mask != (APIMASK_ADI0 | APIMASK_ADI1)) { 630 /* We assume that each CPU sits on it's own PI and that 631 * for present CPUs the reg property equals to the PI 632 * interface id */ 633 cpc925_printk(KERN_WARNING, 634 "Assuming PI id is equal to CPU MPIC id!\n"); 635 } 636 637 of_node_put(cpunode); 638 of_node_put(cpus); 639 640 return mask; 641 } 642 643 /* Enable CPU Errors detection */ 644 static void cpc925_cpu_init(struct cpc925_dev_info *dev_info) 645 { 646 u32 apimask; 647 u32 cpumask; 648 649 apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET); 650 651 cpumask = cpc925_cpu_mask_disabled(); 652 if (apimask & cpumask) { 653 cpc925_printk(KERN_WARNING, "CPU(s) not present, " 654 "but enabled in APIMASK, disabling\n"); 655 apimask &= ~cpumask; 656 } 657 658 if ((apimask & CPU_MASK_ENABLE) == 0) 659 apimask |= CPU_MASK_ENABLE; 660 661 __raw_writel(apimask, dev_info->vbase + REG_APIMASK_OFFSET); 662 } 663 664 /* Disable CPU Errors detection */ 665 static void cpc925_cpu_exit(struct cpc925_dev_info *dev_info) 666 { 667 /* 668 * WARNING: 669 * We are supposed to clear the CPU error detection bits, 670 * and it will be no problem to do so. However, once they 671 * are cleared here if we want to re-install CPC925 EDAC 672 * module later, setting them up in cpc925_cpu_init() will 673 * trigger machine check exception. 674 * Also, it's ok to leave CPU error detection bits enabled, 675 * since they are reset to 1 by default. 676 */ 677 678 return; 679 } 680 681 /* Check for CPU Errors */ 682 static void cpc925_cpu_check(struct edac_device_ctl_info *edac_dev) 683 { 684 struct cpc925_dev_info *dev_info = edac_dev->pvt_info; 685 u32 apiexcp; 686 u32 apimask; 687 688 /* APIEXCP is cleared when read */ 689 apiexcp = __raw_readl(dev_info->vbase + REG_APIEXCP_OFFSET); 690 if ((apiexcp & CPU_EXCP_DETECTED) == 0) 691 return; 692 693 if ((apiexcp & ~cpc925_cpu_mask_disabled()) == 0) 694 return; 695 696 apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET); 697 cpc925_printk(KERN_INFO, "Processor Interface Fault\n" 698 "Processor Interface register dump:\n"); 699 cpc925_printk(KERN_INFO, "APIMASK 0x%08x\n", apimask); 700 cpc925_printk(KERN_INFO, "APIEXCP 0x%08x\n", apiexcp); 701 702 edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); 703 } 704 705 /******************** HT Link err device****************************/ 706 /* Enable HyperTransport Link Error detection */ 707 static void cpc925_htlink_init(struct cpc925_dev_info *dev_info) 708 { 709 u32 ht_errctrl; 710 711 ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET); 712 if ((ht_errctrl & HT_ERRCTRL_ENABLE) == 0) { 713 ht_errctrl |= HT_ERRCTRL_ENABLE; 714 __raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET); 715 } 716 } 717 718 /* Disable HyperTransport Link Error detection */ 719 static void cpc925_htlink_exit(struct cpc925_dev_info *dev_info) 720 { 721 u32 ht_errctrl; 722 723 ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET); 724 ht_errctrl &= ~HT_ERRCTRL_ENABLE; 725 __raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET); 726 } 727 728 /* Check for HyperTransport Link errors */ 729 static void cpc925_htlink_check(struct edac_device_ctl_info *edac_dev) 730 { 731 struct cpc925_dev_info *dev_info = edac_dev->pvt_info; 732 u32 brgctrl = __raw_readl(dev_info->vbase + REG_BRGCTRL_OFFSET); 733 u32 linkctrl = __raw_readl(dev_info->vbase + REG_LINKCTRL_OFFSET); 734 u32 errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET); 735 u32 linkerr = __raw_readl(dev_info->vbase + REG_LINKERR_OFFSET); 736 737 if (!((brgctrl & BRGCTRL_DETSERR) || 738 (linkctrl & HT_LINKCTRL_DETECTED) || 739 (errctrl & HT_ERRCTRL_DETECTED) || 740 (linkerr & HT_LINKERR_DETECTED))) 741 return; 742 743 cpc925_printk(KERN_INFO, "HT Link Fault\n" 744 "HT register dump:\n"); 745 cpc925_printk(KERN_INFO, "Bridge Ctrl 0x%08x\n", 746 brgctrl); 747 cpc925_printk(KERN_INFO, "Link Config Ctrl 0x%08x\n", 748 linkctrl); 749 cpc925_printk(KERN_INFO, "Error Enum and Ctrl 0x%08x\n", 750 errctrl); 751 cpc925_printk(KERN_INFO, "Link Error 0x%08x\n", 752 linkerr); 753 754 /* Clear by write 1 */ 755 if (brgctrl & BRGCTRL_DETSERR) 756 __raw_writel(BRGCTRL_DETSERR, 757 dev_info->vbase + REG_BRGCTRL_OFFSET); 758 759 if (linkctrl & HT_LINKCTRL_DETECTED) 760 __raw_writel(HT_LINKCTRL_DETECTED, 761 dev_info->vbase + REG_LINKCTRL_OFFSET); 762 763 /* Initiate Secondary Bus Reset to clear the chain failure */ 764 if (errctrl & ERRCTRL_CHN_FAL) 765 __raw_writel(BRGCTRL_SECBUSRESET, 766 dev_info->vbase + REG_BRGCTRL_OFFSET); 767 768 if (errctrl & ERRCTRL_RSP_ERR) 769 __raw_writel(ERRCTRL_RSP_ERR, 770 dev_info->vbase + REG_ERRCTRL_OFFSET); 771 772 if (linkerr & HT_LINKERR_DETECTED) 773 __raw_writel(HT_LINKERR_DETECTED, 774 dev_info->vbase + REG_LINKERR_OFFSET); 775 776 edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name); 777 } 778 779 static struct cpc925_dev_info cpc925_devs[] = { 780 { 781 .ctl_name = CPC925_CPU_ERR_DEV, 782 .init = cpc925_cpu_init, 783 .exit = cpc925_cpu_exit, 784 .check = cpc925_cpu_check, 785 }, 786 { 787 .ctl_name = CPC925_HT_LINK_DEV, 788 .init = cpc925_htlink_init, 789 .exit = cpc925_htlink_exit, 790 .check = cpc925_htlink_check, 791 }, 792 {0}, /* Terminated by NULL */ 793 }; 794 795 /* 796 * Add CPU Err detection and HyperTransport Link Err detection 797 * as common "edac_device", they have no corresponding device 798 * nodes in the Open Firmware DTB and we have to add platform 799 * devices for them. Also, they will share the MMIO with that 800 * of memory controller. 801 */ 802 static void cpc925_add_edac_devices(void __iomem *vbase) 803 { 804 struct cpc925_dev_info *dev_info; 805 806 if (!vbase) { 807 cpc925_printk(KERN_ERR, "MMIO not established yet\n"); 808 return; 809 } 810 811 for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) { 812 dev_info->vbase = vbase; 813 dev_info->pdev = platform_device_register_simple( 814 dev_info->ctl_name, 0, NULL, 0); 815 if (IS_ERR(dev_info->pdev)) { 816 cpc925_printk(KERN_ERR, 817 "Can't register platform device for %s\n", 818 dev_info->ctl_name); 819 continue; 820 } 821 822 /* 823 * Don't have to allocate private structure but 824 * make use of cpc925_devs[] instead. 825 */ 826 dev_info->edac_idx = edac_device_alloc_index(); 827 dev_info->edac_dev = 828 edac_device_alloc_ctl_info(0, dev_info->ctl_name, 829 1, NULL, 0, 0, NULL, 0, dev_info->edac_idx); 830 if (!dev_info->edac_dev) { 831 cpc925_printk(KERN_ERR, "No memory for edac device\n"); 832 goto err1; 833 } 834 835 dev_info->edac_dev->pvt_info = dev_info; 836 dev_info->edac_dev->dev = &dev_info->pdev->dev; 837 dev_info->edac_dev->ctl_name = dev_info->ctl_name; 838 dev_info->edac_dev->mod_name = CPC925_EDAC_MOD_STR; 839 dev_info->edac_dev->dev_name = dev_name(&dev_info->pdev->dev); 840 841 if (edac_op_state == EDAC_OPSTATE_POLL) 842 dev_info->edac_dev->edac_check = dev_info->check; 843 844 if (dev_info->init) 845 dev_info->init(dev_info); 846 847 if (edac_device_add_device(dev_info->edac_dev) > 0) { 848 cpc925_printk(KERN_ERR, 849 "Unable to add edac device for %s\n", 850 dev_info->ctl_name); 851 goto err2; 852 } 853 854 edac_dbg(0, "Successfully added edac device for %s\n", 855 dev_info->ctl_name); 856 857 continue; 858 859 err2: 860 if (dev_info->exit) 861 dev_info->exit(dev_info); 862 edac_device_free_ctl_info(dev_info->edac_dev); 863 err1: 864 platform_device_unregister(dev_info->pdev); 865 } 866 } 867 868 /* 869 * Delete the common "edac_device" for CPU Err Detection 870 * and HyperTransport Link Err Detection 871 */ 872 static void cpc925_del_edac_devices(void) 873 { 874 struct cpc925_dev_info *dev_info; 875 876 for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) { 877 if (dev_info->edac_dev) { 878 edac_device_del_device(dev_info->edac_dev->dev); 879 edac_device_free_ctl_info(dev_info->edac_dev); 880 platform_device_unregister(dev_info->pdev); 881 } 882 883 if (dev_info->exit) 884 dev_info->exit(dev_info); 885 886 edac_dbg(0, "Successfully deleted edac device for %s\n", 887 dev_info->ctl_name); 888 } 889 } 890 891 /* Convert current back-ground scrub rate into byte/sec bandwidth */ 892 static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci) 893 { 894 struct cpc925_mc_pdata *pdata = mci->pvt_info; 895 int bw; 896 u32 mscr; 897 u8 si; 898 899 mscr = __raw_readl(pdata->vbase + REG_MSCR_OFFSET); 900 si = (mscr & MSCR_SI_MASK) >> MSCR_SI_SHIFT; 901 902 edac_dbg(0, "Mem Scrub Ctrl Register 0x%x\n", mscr); 903 904 if (((mscr & MSCR_SCRUB_MOD_MASK) != MSCR_BACKGR_SCRUB) || 905 (si == 0)) { 906 cpc925_mc_printk(mci, KERN_INFO, "Scrub mode not enabled\n"); 907 bw = 0; 908 } else 909 bw = CPC925_SCRUB_BLOCK_SIZE * 0xFA67 / si; 910 911 return bw; 912 } 913 914 /* Return 0 for single channel; 1 for dual channel */ 915 static int cpc925_mc_get_channels(void __iomem *vbase) 916 { 917 int dual = 0; 918 u32 mbcr; 919 920 mbcr = __raw_readl(vbase + REG_MBCR_OFFSET); 921 922 /* 923 * Dual channel only when 128-bit wide physical bus 924 * and 128-bit configuration. 925 */ 926 if (((mbcr & MBCR_64BITCFG_MASK) == 0) && 927 ((mbcr & MBCR_64BITBUS_MASK) == 0)) 928 dual = 1; 929 930 edac_dbg(0, "%s channel\n", (dual > 0) ? "Dual" : "Single"); 931 932 return dual; 933 } 934 935 static int __devinit cpc925_probe(struct platform_device *pdev) 936 { 937 static int edac_mc_idx; 938 struct mem_ctl_info *mci; 939 struct edac_mc_layer layers[2]; 940 void __iomem *vbase; 941 struct cpc925_mc_pdata *pdata; 942 struct resource *r; 943 int res = 0, nr_channels; 944 945 edac_dbg(0, "%s platform device found!\n", pdev->name); 946 947 if (!devres_open_group(&pdev->dev, cpc925_probe, GFP_KERNEL)) { 948 res = -ENOMEM; 949 goto out; 950 } 951 952 r = platform_get_resource(pdev, IORESOURCE_MEM, 0); 953 if (!r) { 954 cpc925_printk(KERN_ERR, "Unable to get resource\n"); 955 res = -ENOENT; 956 goto err1; 957 } 958 959 if (!devm_request_mem_region(&pdev->dev, 960 r->start, 961 resource_size(r), 962 pdev->name)) { 963 cpc925_printk(KERN_ERR, "Unable to request mem region\n"); 964 res = -EBUSY; 965 goto err1; 966 } 967 968 vbase = devm_ioremap(&pdev->dev, r->start, resource_size(r)); 969 if (!vbase) { 970 cpc925_printk(KERN_ERR, "Unable to ioremap device\n"); 971 res = -ENOMEM; 972 goto err2; 973 } 974 975 nr_channels = cpc925_mc_get_channels(vbase) + 1; 976 977 layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; 978 layers[0].size = CPC925_NR_CSROWS; 979 layers[0].is_virt_csrow = true; 980 layers[1].type = EDAC_MC_LAYER_CHANNEL; 981 layers[1].size = nr_channels; 982 layers[1].is_virt_csrow = false; 983 mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers, 984 sizeof(struct cpc925_mc_pdata)); 985 if (!mci) { 986 cpc925_printk(KERN_ERR, "No memory for mem_ctl_info\n"); 987 res = -ENOMEM; 988 goto err2; 989 } 990 991 pdata = mci->pvt_info; 992 pdata->vbase = vbase; 993 pdata->edac_idx = edac_mc_idx++; 994 pdata->name = pdev->name; 995 996 mci->pdev = &pdev->dev; 997 platform_set_drvdata(pdev, mci); 998 mci->dev_name = dev_name(&pdev->dev); 999 mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR; 1000 mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; 1001 mci->edac_cap = EDAC_FLAG_SECDED; 1002 mci->mod_name = CPC925_EDAC_MOD_STR; 1003 mci->mod_ver = CPC925_EDAC_REVISION; 1004 mci->ctl_name = pdev->name; 1005 1006 if (edac_op_state == EDAC_OPSTATE_POLL) 1007 mci->edac_check = cpc925_mc_check; 1008 1009 mci->ctl_page_to_phys = NULL; 1010 mci->scrub_mode = SCRUB_SW_SRC; 1011 mci->set_sdram_scrub_rate = NULL; 1012 mci->get_sdram_scrub_rate = cpc925_get_sdram_scrub_rate; 1013 1014 cpc925_init_csrows(mci); 1015 1016 /* Setup memory controller registers */ 1017 cpc925_mc_init(mci); 1018 1019 if (edac_mc_add_mc(mci) > 0) { 1020 cpc925_mc_printk(mci, KERN_ERR, "Failed edac_mc_add_mc()\n"); 1021 goto err3; 1022 } 1023 1024 cpc925_add_edac_devices(vbase); 1025 1026 /* get this far and it's successful */ 1027 edac_dbg(0, "success\n"); 1028 1029 res = 0; 1030 goto out; 1031 1032 err3: 1033 cpc925_mc_exit(mci); 1034 edac_mc_free(mci); 1035 err2: 1036 devm_release_mem_region(&pdev->dev, r->start, resource_size(r)); 1037 err1: 1038 devres_release_group(&pdev->dev, cpc925_probe); 1039 out: 1040 return res; 1041 } 1042 1043 static int cpc925_remove(struct platform_device *pdev) 1044 { 1045 struct mem_ctl_info *mci = platform_get_drvdata(pdev); 1046 1047 /* 1048 * Delete common edac devices before edac mc, because 1049 * the former share the MMIO of the latter. 1050 */ 1051 cpc925_del_edac_devices(); 1052 cpc925_mc_exit(mci); 1053 1054 edac_mc_del_mc(&pdev->dev); 1055 edac_mc_free(mci); 1056 1057 return 0; 1058 } 1059 1060 static struct platform_driver cpc925_edac_driver = { 1061 .probe = cpc925_probe, 1062 .remove = cpc925_remove, 1063 .driver = { 1064 .name = "cpc925_edac", 1065 } 1066 }; 1067 1068 static int __init cpc925_edac_init(void) 1069 { 1070 int ret = 0; 1071 1072 printk(KERN_INFO "IBM CPC925 EDAC driver " CPC925_EDAC_REVISION "\n"); 1073 printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc\n"); 1074 1075 /* Only support POLL mode so far */ 1076 edac_op_state = EDAC_OPSTATE_POLL; 1077 1078 ret = platform_driver_register(&cpc925_edac_driver); 1079 if (ret) { 1080 printk(KERN_WARNING "Failed to register %s\n", 1081 CPC925_EDAC_MOD_STR); 1082 } 1083 1084 return ret; 1085 } 1086 1087 static void __exit cpc925_edac_exit(void) 1088 { 1089 platform_driver_unregister(&cpc925_edac_driver); 1090 } 1091 1092 module_init(cpc925_edac_init); 1093 module_exit(cpc925_edac_exit); 1094 1095 MODULE_LICENSE("GPL"); 1096 MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>"); 1097 MODULE_DESCRIPTION("IBM CPC925 Bridge and MC EDAC kernel module"); 1098