1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * cpc925_edac.c, EDAC driver for IBM CPC925 Bridge and Memory Controller.
4 *
5 * Copyright (c) 2008 Wind River Systems, Inc.
6 *
7 * Authors: Cao Qingtao <qingtao.cao@windriver.com>
8 */
9
10 #include <linux/module.h>
11 #include <linux/init.h>
12 #include <linux/io.h>
13 #include <linux/edac.h>
14 #include <linux/of.h>
15 #include <linux/platform_device.h>
16 #include <linux/gfp.h>
17
18 #include "edac_module.h"
19
20 #define CPC925_EDAC_REVISION " Ver: 1.0.0"
21 #define CPC925_EDAC_MOD_STR "cpc925_edac"
22
23 #define cpc925_printk(level, fmt, arg...) \
24 edac_printk(level, "CPC925", fmt, ##arg)
25
26 #define cpc925_mc_printk(mci, level, fmt, arg...) \
27 edac_mc_chipset_printk(mci, level, "CPC925", fmt, ##arg)
28
29 /*
30 * CPC925 registers are of 32 bits with bit0 defined at the
31 * most significant bit and bit31 at that of least significant.
32 */
33 #define CPC925_BITS_PER_REG 32
34 #define CPC925_BIT(nr) (1UL << (CPC925_BITS_PER_REG - 1 - nr))
35
36 /*
37 * EDAC device names for the error detections of
38 * CPU Interface and Hypertransport Link.
39 */
40 #define CPC925_CPU_ERR_DEV "cpu"
41 #define CPC925_HT_LINK_DEV "htlink"
42
43 /* Suppose DDR Refresh cycle is 15.6 microsecond */
44 #define CPC925_REF_FREQ 0xFA69
45 #define CPC925_SCRUB_BLOCK_SIZE 64 /* bytes */
46 #define CPC925_NR_CSROWS 8
47
48 /*
49 * All registers and bits definitions are taken from
50 * "CPC925 Bridge and Memory Controller User Manual, SA14-2761-02".
51 */
52
53 /*
54 * CPU and Memory Controller Registers
55 */
56 /************************************************************
57 * Processor Interface Exception Mask Register (APIMASK)
58 ************************************************************/
59 #define REG_APIMASK_OFFSET 0x30070
60 enum apimask_bits {
61 APIMASK_DART = CPC925_BIT(0), /* DART Exception */
62 APIMASK_ADI0 = CPC925_BIT(1), /* Handshake Error on PI0_ADI */
63 APIMASK_ADI1 = CPC925_BIT(2), /* Handshake Error on PI1_ADI */
64 APIMASK_STAT = CPC925_BIT(3), /* Status Exception */
65 APIMASK_DERR = CPC925_BIT(4), /* Data Error Exception */
66 APIMASK_ADRS0 = CPC925_BIT(5), /* Addressing Exception on PI0 */
67 APIMASK_ADRS1 = CPC925_BIT(6), /* Addressing Exception on PI1 */
68 /* BIT(7) Reserved */
69 APIMASK_ECC_UE_H = CPC925_BIT(8), /* UECC upper */
70 APIMASK_ECC_CE_H = CPC925_BIT(9), /* CECC upper */
71 APIMASK_ECC_UE_L = CPC925_BIT(10), /* UECC lower */
72 APIMASK_ECC_CE_L = CPC925_BIT(11), /* CECC lower */
73
74 CPU_MASK_ENABLE = (APIMASK_DART | APIMASK_ADI0 | APIMASK_ADI1 |
75 APIMASK_STAT | APIMASK_DERR | APIMASK_ADRS0 |
76 APIMASK_ADRS1),
77 ECC_MASK_ENABLE = (APIMASK_ECC_UE_H | APIMASK_ECC_CE_H |
78 APIMASK_ECC_UE_L | APIMASK_ECC_CE_L),
79 };
80 #define APIMASK_ADI(n) CPC925_BIT(((n)+1))
81
82 /************************************************************
83 * Processor Interface Exception Register (APIEXCP)
84 ************************************************************/
85 #define REG_APIEXCP_OFFSET 0x30060
86 enum apiexcp_bits {
87 APIEXCP_DART = CPC925_BIT(0), /* DART Exception */
88 APIEXCP_ADI0 = CPC925_BIT(1), /* Handshake Error on PI0_ADI */
89 APIEXCP_ADI1 = CPC925_BIT(2), /* Handshake Error on PI1_ADI */
90 APIEXCP_STAT = CPC925_BIT(3), /* Status Exception */
91 APIEXCP_DERR = CPC925_BIT(4), /* Data Error Exception */
92 APIEXCP_ADRS0 = CPC925_BIT(5), /* Addressing Exception on PI0 */
93 APIEXCP_ADRS1 = CPC925_BIT(6), /* Addressing Exception on PI1 */
94 /* BIT(7) Reserved */
95 APIEXCP_ECC_UE_H = CPC925_BIT(8), /* UECC upper */
96 APIEXCP_ECC_CE_H = CPC925_BIT(9), /* CECC upper */
97 APIEXCP_ECC_UE_L = CPC925_BIT(10), /* UECC lower */
98 APIEXCP_ECC_CE_L = CPC925_BIT(11), /* CECC lower */
99
100 CPU_EXCP_DETECTED = (APIEXCP_DART | APIEXCP_ADI0 | APIEXCP_ADI1 |
101 APIEXCP_STAT | APIEXCP_DERR | APIEXCP_ADRS0 |
102 APIEXCP_ADRS1),
103 UECC_EXCP_DETECTED = (APIEXCP_ECC_UE_H | APIEXCP_ECC_UE_L),
104 CECC_EXCP_DETECTED = (APIEXCP_ECC_CE_H | APIEXCP_ECC_CE_L),
105 ECC_EXCP_DETECTED = (UECC_EXCP_DETECTED | CECC_EXCP_DETECTED),
106 };
107
108 /************************************************************
109 * Memory Bus Configuration Register (MBCR)
110 ************************************************************/
111 #define REG_MBCR_OFFSET 0x2190
112 #define MBCR_64BITCFG_SHIFT 23
113 #define MBCR_64BITCFG_MASK (1UL << MBCR_64BITCFG_SHIFT)
114 #define MBCR_64BITBUS_SHIFT 22
115 #define MBCR_64BITBUS_MASK (1UL << MBCR_64BITBUS_SHIFT)
116
117 /************************************************************
118 * Memory Bank Mode Register (MBMR)
119 ************************************************************/
120 #define REG_MBMR_OFFSET 0x21C0
121 #define MBMR_MODE_MAX_VALUE 0xF
122 #define MBMR_MODE_SHIFT 25
123 #define MBMR_MODE_MASK (MBMR_MODE_MAX_VALUE << MBMR_MODE_SHIFT)
124 #define MBMR_BBA_SHIFT 24
125 #define MBMR_BBA_MASK (1UL << MBMR_BBA_SHIFT)
126
127 /************************************************************
128 * Memory Bank Boundary Address Register (MBBAR)
129 ************************************************************/
130 #define REG_MBBAR_OFFSET 0x21D0
131 #define MBBAR_BBA_MAX_VALUE 0xFF
132 #define MBBAR_BBA_SHIFT 24
133 #define MBBAR_BBA_MASK (MBBAR_BBA_MAX_VALUE << MBBAR_BBA_SHIFT)
134
135 /************************************************************
136 * Memory Scrub Control Register (MSCR)
137 ************************************************************/
138 #define REG_MSCR_OFFSET 0x2400
139 #define MSCR_SCRUB_MOD_MASK 0xC0000000 /* scrub_mod - bit0:1*/
140 #define MSCR_BACKGR_SCRUB 0x40000000 /* 01 */
141 #define MSCR_SI_SHIFT 16 /* si - bit8:15*/
142 #define MSCR_SI_MAX_VALUE 0xFF
143 #define MSCR_SI_MASK (MSCR_SI_MAX_VALUE << MSCR_SI_SHIFT)
144
145 /************************************************************
146 * Memory Scrub Range Start Register (MSRSR)
147 ************************************************************/
148 #define REG_MSRSR_OFFSET 0x2410
149
150 /************************************************************
151 * Memory Scrub Range End Register (MSRER)
152 ************************************************************/
153 #define REG_MSRER_OFFSET 0x2420
154
155 /************************************************************
156 * Memory Scrub Pattern Register (MSPR)
157 ************************************************************/
158 #define REG_MSPR_OFFSET 0x2430
159
160 /************************************************************
161 * Memory Check Control Register (MCCR)
162 ************************************************************/
163 #define REG_MCCR_OFFSET 0x2440
164 enum mccr_bits {
165 MCCR_ECC_EN = CPC925_BIT(0), /* ECC high and low check */
166 };
167
168 /************************************************************
169 * Memory Check Range End Register (MCRER)
170 ************************************************************/
171 #define REG_MCRER_OFFSET 0x2450
172
173 /************************************************************
174 * Memory Error Address Register (MEAR)
175 ************************************************************/
176 #define REG_MEAR_OFFSET 0x2460
177 #define MEAR_BCNT_MAX_VALUE 0x3
178 #define MEAR_BCNT_SHIFT 30
179 #define MEAR_BCNT_MASK (MEAR_BCNT_MAX_VALUE << MEAR_BCNT_SHIFT)
180 #define MEAR_RANK_MAX_VALUE 0x7
181 #define MEAR_RANK_SHIFT 27
182 #define MEAR_RANK_MASK (MEAR_RANK_MAX_VALUE << MEAR_RANK_SHIFT)
183 #define MEAR_COL_MAX_VALUE 0x7FF
184 #define MEAR_COL_SHIFT 16
185 #define MEAR_COL_MASK (MEAR_COL_MAX_VALUE << MEAR_COL_SHIFT)
186 #define MEAR_BANK_MAX_VALUE 0x3
187 #define MEAR_BANK_SHIFT 14
188 #define MEAR_BANK_MASK (MEAR_BANK_MAX_VALUE << MEAR_BANK_SHIFT)
189 #define MEAR_ROW_MASK 0x00003FFF
190
191 /************************************************************
192 * Memory Error Syndrome Register (MESR)
193 ************************************************************/
194 #define REG_MESR_OFFSET 0x2470
195 #define MESR_ECC_SYN_H_MASK 0xFF00
196 #define MESR_ECC_SYN_L_MASK 0x00FF
197
198 /************************************************************
199 * Memory Mode Control Register (MMCR)
200 ************************************************************/
201 #define REG_MMCR_OFFSET 0x2500
202 enum mmcr_bits {
203 MMCR_REG_DIMM_MODE = CPC925_BIT(3),
204 };
205
206 /*
207 * HyperTransport Link Registers
208 */
209 /************************************************************
210 * Error Handling/Enumeration Scratch Pad Register (ERRCTRL)
211 ************************************************************/
212 #define REG_ERRCTRL_OFFSET 0x70140
213 enum errctrl_bits { /* nonfatal interrupts for */
214 ERRCTRL_SERR_NF = CPC925_BIT(0), /* system error */
215 ERRCTRL_CRC_NF = CPC925_BIT(1), /* CRC error */
216 ERRCTRL_RSP_NF = CPC925_BIT(2), /* Response error */
217 ERRCTRL_EOC_NF = CPC925_BIT(3), /* End-Of-Chain error */
218 ERRCTRL_OVF_NF = CPC925_BIT(4), /* Overflow error */
219 ERRCTRL_PROT_NF = CPC925_BIT(5), /* Protocol error */
220
221 ERRCTRL_RSP_ERR = CPC925_BIT(6), /* Response error received */
222 ERRCTRL_CHN_FAL = CPC925_BIT(7), /* Sync flooding detected */
223
224 HT_ERRCTRL_ENABLE = (ERRCTRL_SERR_NF | ERRCTRL_CRC_NF |
225 ERRCTRL_RSP_NF | ERRCTRL_EOC_NF |
226 ERRCTRL_OVF_NF | ERRCTRL_PROT_NF),
227 HT_ERRCTRL_DETECTED = (ERRCTRL_RSP_ERR | ERRCTRL_CHN_FAL),
228 };
229
230 /************************************************************
231 * Link Configuration and Link Control Register (LINKCTRL)
232 ************************************************************/
233 #define REG_LINKCTRL_OFFSET 0x70110
234 enum linkctrl_bits {
235 LINKCTRL_CRC_ERR = (CPC925_BIT(22) | CPC925_BIT(23)),
236 LINKCTRL_LINK_FAIL = CPC925_BIT(27),
237
238 HT_LINKCTRL_DETECTED = (LINKCTRL_CRC_ERR | LINKCTRL_LINK_FAIL),
239 };
240
241 /************************************************************
242 * Link FreqCap/Error/Freq/Revision ID Register (LINKERR)
243 ************************************************************/
244 #define REG_LINKERR_OFFSET 0x70120
245 enum linkerr_bits {
246 LINKERR_EOC_ERR = CPC925_BIT(17), /* End-Of-Chain error */
247 LINKERR_OVF_ERR = CPC925_BIT(18), /* Receive Buffer Overflow */
248 LINKERR_PROT_ERR = CPC925_BIT(19), /* Protocol error */
249
250 HT_LINKERR_DETECTED = (LINKERR_EOC_ERR | LINKERR_OVF_ERR |
251 LINKERR_PROT_ERR),
252 };
253
254 /************************************************************
255 * Bridge Control Register (BRGCTRL)
256 ************************************************************/
257 #define REG_BRGCTRL_OFFSET 0x70300
258 enum brgctrl_bits {
259 BRGCTRL_DETSERR = CPC925_BIT(0), /* SERR on Secondary Bus */
260 BRGCTRL_SECBUSRESET = CPC925_BIT(9), /* Secondary Bus Reset */
261 };
262
263 /* Private structure for edac memory controller */
264 struct cpc925_mc_pdata {
265 void __iomem *vbase;
266 unsigned long total_mem;
267 const char *name;
268 int edac_idx;
269 };
270
271 /* Private structure for common edac device */
272 struct cpc925_dev_info {
273 void __iomem *vbase;
274 struct platform_device *pdev;
275 char *ctl_name;
276 int edac_idx;
277 struct edac_device_ctl_info *edac_dev;
278 void (*init)(struct cpc925_dev_info *dev_info);
279 void (*exit)(struct cpc925_dev_info *dev_info);
280 void (*check)(struct edac_device_ctl_info *edac_dev);
281 };
282
283 /* Get total memory size from Open Firmware DTB */
get_total_mem(struct cpc925_mc_pdata * pdata)284 static void get_total_mem(struct cpc925_mc_pdata *pdata)
285 {
286 struct device_node *np = NULL;
287 const unsigned int *reg, *reg_end;
288 int len, sw, aw;
289 unsigned long start, size;
290
291 np = of_find_node_by_type(NULL, "memory");
292 if (!np)
293 return;
294
295 aw = of_n_addr_cells(np);
296 sw = of_n_size_cells(np);
297 reg = (const unsigned int *)of_get_property(np, "reg", &len);
298 reg_end = reg + len/4;
299
300 pdata->total_mem = 0;
301 do {
302 start = of_read_number(reg, aw);
303 reg += aw;
304 size = of_read_number(reg, sw);
305 reg += sw;
306 edac_dbg(1, "start 0x%lx, size 0x%lx\n", start, size);
307 pdata->total_mem += size;
308 } while (reg < reg_end);
309
310 of_node_put(np);
311 edac_dbg(0, "total_mem 0x%lx\n", pdata->total_mem);
312 }
313
cpc925_init_csrows(struct mem_ctl_info * mci)314 static void cpc925_init_csrows(struct mem_ctl_info *mci)
315 {
316 struct cpc925_mc_pdata *pdata = mci->pvt_info;
317 struct csrow_info *csrow;
318 struct dimm_info *dimm;
319 enum dev_type dtype;
320 int index, j;
321 u32 mbmr, mbbar, bba, grain;
322 unsigned long row_size, nr_pages, last_nr_pages = 0;
323
324 get_total_mem(pdata);
325
326 for (index = 0; index < mci->nr_csrows; index++) {
327 mbmr = __raw_readl(pdata->vbase + REG_MBMR_OFFSET +
328 0x20 * index);
329 mbbar = __raw_readl(pdata->vbase + REG_MBBAR_OFFSET +
330 0x20 + index);
331 bba = (((mbmr & MBMR_BBA_MASK) >> MBMR_BBA_SHIFT) << 8) |
332 ((mbbar & MBBAR_BBA_MASK) >> MBBAR_BBA_SHIFT);
333
334 if (bba == 0)
335 continue; /* not populated */
336
337 csrow = mci->csrows[index];
338
339 row_size = bba * (1UL << 28); /* 256M */
340 csrow->first_page = last_nr_pages;
341 nr_pages = row_size >> PAGE_SHIFT;
342 csrow->last_page = csrow->first_page + nr_pages - 1;
343 last_nr_pages = csrow->last_page + 1;
344
345 switch (csrow->nr_channels) {
346 case 1: /* Single channel */
347 grain = 32; /* four-beat burst of 32 bytes */
348 break;
349 case 2: /* Dual channel */
350 default:
351 grain = 64; /* four-beat burst of 64 bytes */
352 break;
353 }
354 switch ((mbmr & MBMR_MODE_MASK) >> MBMR_MODE_SHIFT) {
355 case 6: /* 0110, no way to differentiate X8 VS X16 */
356 case 5: /* 0101 */
357 case 8: /* 1000 */
358 dtype = DEV_X16;
359 break;
360 case 7: /* 0111 */
361 case 9: /* 1001 */
362 dtype = DEV_X8;
363 break;
364 default:
365 dtype = DEV_UNKNOWN;
366 break;
367 }
368 for (j = 0; j < csrow->nr_channels; j++) {
369 dimm = csrow->channels[j]->dimm;
370 dimm->nr_pages = nr_pages / csrow->nr_channels;
371 dimm->mtype = MEM_RDDR;
372 dimm->edac_mode = EDAC_SECDED;
373 dimm->grain = grain;
374 dimm->dtype = dtype;
375 }
376 }
377 }
378
379 /* Enable memory controller ECC detection */
cpc925_mc_init(struct mem_ctl_info * mci)380 static void cpc925_mc_init(struct mem_ctl_info *mci)
381 {
382 struct cpc925_mc_pdata *pdata = mci->pvt_info;
383 u32 apimask;
384 u32 mccr;
385
386 /* Enable various ECC error exceptions */
387 apimask = __raw_readl(pdata->vbase + REG_APIMASK_OFFSET);
388 if ((apimask & ECC_MASK_ENABLE) == 0) {
389 apimask |= ECC_MASK_ENABLE;
390 __raw_writel(apimask, pdata->vbase + REG_APIMASK_OFFSET);
391 }
392
393 /* Enable ECC detection */
394 mccr = __raw_readl(pdata->vbase + REG_MCCR_OFFSET);
395 if ((mccr & MCCR_ECC_EN) == 0) {
396 mccr |= MCCR_ECC_EN;
397 __raw_writel(mccr, pdata->vbase + REG_MCCR_OFFSET);
398 }
399 }
400
401 /* Disable memory controller ECC detection */
cpc925_mc_exit(struct mem_ctl_info * mci)402 static void cpc925_mc_exit(struct mem_ctl_info *mci)
403 {
404 /*
405 * WARNING:
406 * We are supposed to clear the ECC error detection bits,
407 * and it will be no problem to do so. However, once they
408 * are cleared here if we want to re-install CPC925 EDAC
409 * module later, setting them up in cpc925_mc_init() will
410 * trigger machine check exception.
411 * Also, it's ok to leave ECC error detection bits enabled,
412 * since they are reset to 1 by default or by boot loader.
413 */
414
415 return;
416 }
417
418 /*
419 * Revert DDR column/row/bank addresses into page frame number and
420 * offset in page.
421 *
422 * Suppose memory mode is 0x0111(128-bit mode, identical DIMM pairs),
423 * physical address(PA) bits to column address(CA) bits mappings are:
424 * CA 0 1 2 3 4 5 6 7 8 9 10
425 * PA 59 58 57 56 55 54 53 52 51 50 49
426 *
427 * physical address(PA) bits to bank address(BA) bits mappings are:
428 * BA 0 1
429 * PA 43 44
430 *
431 * physical address(PA) bits to row address(RA) bits mappings are:
432 * RA 0 1 2 3 4 5 6 7 8 9 10 11 12
433 * PA 36 35 34 48 47 46 45 40 41 42 39 38 37
434 */
cpc925_mc_get_pfn(struct mem_ctl_info * mci,u32 mear,unsigned long * pfn,unsigned long * offset,int * csrow)435 static void cpc925_mc_get_pfn(struct mem_ctl_info *mci, u32 mear,
436 unsigned long *pfn, unsigned long *offset, int *csrow)
437 {
438 u32 bcnt, rank, col, bank, row;
439 u32 c;
440 unsigned long pa;
441 int i;
442
443 bcnt = (mear & MEAR_BCNT_MASK) >> MEAR_BCNT_SHIFT;
444 rank = (mear & MEAR_RANK_MASK) >> MEAR_RANK_SHIFT;
445 col = (mear & MEAR_COL_MASK) >> MEAR_COL_SHIFT;
446 bank = (mear & MEAR_BANK_MASK) >> MEAR_BANK_SHIFT;
447 row = mear & MEAR_ROW_MASK;
448
449 *csrow = rank;
450
451 #ifdef CONFIG_EDAC_DEBUG
452 if (mci->csrows[rank]->first_page == 0) {
453 cpc925_mc_printk(mci, KERN_ERR, "ECC occurs in a "
454 "non-populated csrow, broken hardware?\n");
455 return;
456 }
457 #endif
458
459 /* Revert csrow number */
460 pa = mci->csrows[rank]->first_page << PAGE_SHIFT;
461
462 /* Revert column address */
463 col += bcnt;
464 for (i = 0; i < 11; i++) {
465 c = col & 0x1;
466 col >>= 1;
467 pa |= c << (14 - i);
468 }
469
470 /* Revert bank address */
471 pa |= bank << 19;
472
473 /* Revert row address, in 4 steps */
474 for (i = 0; i < 3; i++) {
475 c = row & 0x1;
476 row >>= 1;
477 pa |= c << (26 - i);
478 }
479
480 for (i = 0; i < 3; i++) {
481 c = row & 0x1;
482 row >>= 1;
483 pa |= c << (21 + i);
484 }
485
486 for (i = 0; i < 4; i++) {
487 c = row & 0x1;
488 row >>= 1;
489 pa |= c << (18 - i);
490 }
491
492 for (i = 0; i < 3; i++) {
493 c = row & 0x1;
494 row >>= 1;
495 pa |= c << (29 - i);
496 }
497
498 *offset = pa & (PAGE_SIZE - 1);
499 *pfn = pa >> PAGE_SHIFT;
500
501 edac_dbg(0, "ECC physical address 0x%lx\n", pa);
502 }
503
cpc925_mc_find_channel(struct mem_ctl_info * mci,u16 syndrome)504 static int cpc925_mc_find_channel(struct mem_ctl_info *mci, u16 syndrome)
505 {
506 if ((syndrome & MESR_ECC_SYN_H_MASK) == 0)
507 return 0;
508
509 if ((syndrome & MESR_ECC_SYN_L_MASK) == 0)
510 return 1;
511
512 cpc925_mc_printk(mci, KERN_INFO, "Unexpected syndrome value: 0x%x\n",
513 syndrome);
514 return 1;
515 }
516
517 /* Check memory controller registers for ECC errors */
cpc925_mc_check(struct mem_ctl_info * mci)518 static void cpc925_mc_check(struct mem_ctl_info *mci)
519 {
520 struct cpc925_mc_pdata *pdata = mci->pvt_info;
521 u32 apiexcp;
522 u32 mear;
523 u32 mesr;
524 u16 syndrome;
525 unsigned long pfn = 0, offset = 0;
526 int csrow = 0, channel = 0;
527
528 /* APIEXCP is cleared when read */
529 apiexcp = __raw_readl(pdata->vbase + REG_APIEXCP_OFFSET);
530 if ((apiexcp & ECC_EXCP_DETECTED) == 0)
531 return;
532
533 mesr = __raw_readl(pdata->vbase + REG_MESR_OFFSET);
534 syndrome = mesr | (MESR_ECC_SYN_H_MASK | MESR_ECC_SYN_L_MASK);
535
536 mear = __raw_readl(pdata->vbase + REG_MEAR_OFFSET);
537
538 /* Revert column/row addresses into page frame number, etc */
539 cpc925_mc_get_pfn(mci, mear, &pfn, &offset, &csrow);
540
541 if (apiexcp & CECC_EXCP_DETECTED) {
542 cpc925_mc_printk(mci, KERN_INFO, "DRAM CECC Fault\n");
543 channel = cpc925_mc_find_channel(mci, syndrome);
544 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
545 pfn, offset, syndrome,
546 csrow, channel, -1,
547 mci->ctl_name, "");
548 }
549
550 if (apiexcp & UECC_EXCP_DETECTED) {
551 cpc925_mc_printk(mci, KERN_INFO, "DRAM UECC Fault\n");
552 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
553 pfn, offset, 0,
554 csrow, -1, -1,
555 mci->ctl_name, "");
556 }
557
558 cpc925_mc_printk(mci, KERN_INFO, "Dump registers:\n");
559 cpc925_mc_printk(mci, KERN_INFO, "APIMASK 0x%08x\n",
560 __raw_readl(pdata->vbase + REG_APIMASK_OFFSET));
561 cpc925_mc_printk(mci, KERN_INFO, "APIEXCP 0x%08x\n",
562 apiexcp);
563 cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Ctrl 0x%08x\n",
564 __raw_readl(pdata->vbase + REG_MSCR_OFFSET));
565 cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge Start 0x%08x\n",
566 __raw_readl(pdata->vbase + REG_MSRSR_OFFSET));
567 cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge End 0x%08x\n",
568 __raw_readl(pdata->vbase + REG_MSRER_OFFSET));
569 cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Pattern 0x%08x\n",
570 __raw_readl(pdata->vbase + REG_MSPR_OFFSET));
571 cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Ctrl 0x%08x\n",
572 __raw_readl(pdata->vbase + REG_MCCR_OFFSET));
573 cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Rge End 0x%08x\n",
574 __raw_readl(pdata->vbase + REG_MCRER_OFFSET));
575 cpc925_mc_printk(mci, KERN_INFO, "Mem Err Address 0x%08x\n",
576 mesr);
577 cpc925_mc_printk(mci, KERN_INFO, "Mem Err Syndrome 0x%08x\n",
578 syndrome);
579 }
580
581 /******************** CPU err device********************************/
cpc925_cpu_mask_disabled(void)582 static u32 cpc925_cpu_mask_disabled(void)
583 {
584 struct device_node *cpunode;
585 static u32 mask = 0;
586
587 /* use cached value if available */
588 if (mask != 0)
589 return mask;
590
591 mask = APIMASK_ADI0 | APIMASK_ADI1;
592
593 for_each_of_cpu_node(cpunode) {
594 const u32 *reg = of_get_property(cpunode, "reg", NULL);
595 if (reg == NULL || *reg > 2) {
596 cpc925_printk(KERN_ERR, "Bad reg value at %pOF\n", cpunode);
597 continue;
598 }
599
600 mask &= ~APIMASK_ADI(*reg);
601 }
602
603 if (mask != (APIMASK_ADI0 | APIMASK_ADI1)) {
604 /* We assume that each CPU sits on it's own PI and that
605 * for present CPUs the reg property equals to the PI
606 * interface id */
607 cpc925_printk(KERN_WARNING,
608 "Assuming PI id is equal to CPU MPIC id!\n");
609 }
610
611 return mask;
612 }
613
614 /* Enable CPU Errors detection */
cpc925_cpu_init(struct cpc925_dev_info * dev_info)615 static void cpc925_cpu_init(struct cpc925_dev_info *dev_info)
616 {
617 u32 apimask;
618 u32 cpumask;
619
620 apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET);
621
622 cpumask = cpc925_cpu_mask_disabled();
623 if (apimask & cpumask) {
624 cpc925_printk(KERN_WARNING, "CPU(s) not present, "
625 "but enabled in APIMASK, disabling\n");
626 apimask &= ~cpumask;
627 }
628
629 if ((apimask & CPU_MASK_ENABLE) == 0)
630 apimask |= CPU_MASK_ENABLE;
631
632 __raw_writel(apimask, dev_info->vbase + REG_APIMASK_OFFSET);
633 }
634
635 /* Disable CPU Errors detection */
cpc925_cpu_exit(struct cpc925_dev_info * dev_info)636 static void cpc925_cpu_exit(struct cpc925_dev_info *dev_info)
637 {
638 /*
639 * WARNING:
640 * We are supposed to clear the CPU error detection bits,
641 * and it will be no problem to do so. However, once they
642 * are cleared here if we want to re-install CPC925 EDAC
643 * module later, setting them up in cpc925_cpu_init() will
644 * trigger machine check exception.
645 * Also, it's ok to leave CPU error detection bits enabled,
646 * since they are reset to 1 by default.
647 */
648
649 return;
650 }
651
652 /* Check for CPU Errors */
cpc925_cpu_check(struct edac_device_ctl_info * edac_dev)653 static void cpc925_cpu_check(struct edac_device_ctl_info *edac_dev)
654 {
655 struct cpc925_dev_info *dev_info = edac_dev->pvt_info;
656 u32 apiexcp;
657 u32 apimask;
658
659 /* APIEXCP is cleared when read */
660 apiexcp = __raw_readl(dev_info->vbase + REG_APIEXCP_OFFSET);
661 if ((apiexcp & CPU_EXCP_DETECTED) == 0)
662 return;
663
664 if ((apiexcp & ~cpc925_cpu_mask_disabled()) == 0)
665 return;
666
667 apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET);
668 cpc925_printk(KERN_INFO, "Processor Interface Fault\n"
669 "Processor Interface register dump:\n");
670 cpc925_printk(KERN_INFO, "APIMASK 0x%08x\n", apimask);
671 cpc925_printk(KERN_INFO, "APIEXCP 0x%08x\n", apiexcp);
672
673 edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name);
674 }
675
676 /******************** HT Link err device****************************/
677 /* Enable HyperTransport Link Error detection */
cpc925_htlink_init(struct cpc925_dev_info * dev_info)678 static void cpc925_htlink_init(struct cpc925_dev_info *dev_info)
679 {
680 u32 ht_errctrl;
681
682 ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET);
683 if ((ht_errctrl & HT_ERRCTRL_ENABLE) == 0) {
684 ht_errctrl |= HT_ERRCTRL_ENABLE;
685 __raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET);
686 }
687 }
688
689 /* Disable HyperTransport Link Error detection */
cpc925_htlink_exit(struct cpc925_dev_info * dev_info)690 static void cpc925_htlink_exit(struct cpc925_dev_info *dev_info)
691 {
692 u32 ht_errctrl;
693
694 ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET);
695 ht_errctrl &= ~HT_ERRCTRL_ENABLE;
696 __raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET);
697 }
698
699 /* Check for HyperTransport Link errors */
cpc925_htlink_check(struct edac_device_ctl_info * edac_dev)700 static void cpc925_htlink_check(struct edac_device_ctl_info *edac_dev)
701 {
702 struct cpc925_dev_info *dev_info = edac_dev->pvt_info;
703 u32 brgctrl = __raw_readl(dev_info->vbase + REG_BRGCTRL_OFFSET);
704 u32 linkctrl = __raw_readl(dev_info->vbase + REG_LINKCTRL_OFFSET);
705 u32 errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET);
706 u32 linkerr = __raw_readl(dev_info->vbase + REG_LINKERR_OFFSET);
707
708 if (!((brgctrl & BRGCTRL_DETSERR) ||
709 (linkctrl & HT_LINKCTRL_DETECTED) ||
710 (errctrl & HT_ERRCTRL_DETECTED) ||
711 (linkerr & HT_LINKERR_DETECTED)))
712 return;
713
714 cpc925_printk(KERN_INFO, "HT Link Fault\n"
715 "HT register dump:\n");
716 cpc925_printk(KERN_INFO, "Bridge Ctrl 0x%08x\n",
717 brgctrl);
718 cpc925_printk(KERN_INFO, "Link Config Ctrl 0x%08x\n",
719 linkctrl);
720 cpc925_printk(KERN_INFO, "Error Enum and Ctrl 0x%08x\n",
721 errctrl);
722 cpc925_printk(KERN_INFO, "Link Error 0x%08x\n",
723 linkerr);
724
725 /* Clear by write 1 */
726 if (brgctrl & BRGCTRL_DETSERR)
727 __raw_writel(BRGCTRL_DETSERR,
728 dev_info->vbase + REG_BRGCTRL_OFFSET);
729
730 if (linkctrl & HT_LINKCTRL_DETECTED)
731 __raw_writel(HT_LINKCTRL_DETECTED,
732 dev_info->vbase + REG_LINKCTRL_OFFSET);
733
734 /* Initiate Secondary Bus Reset to clear the chain failure */
735 if (errctrl & ERRCTRL_CHN_FAL)
736 __raw_writel(BRGCTRL_SECBUSRESET,
737 dev_info->vbase + REG_BRGCTRL_OFFSET);
738
739 if (errctrl & ERRCTRL_RSP_ERR)
740 __raw_writel(ERRCTRL_RSP_ERR,
741 dev_info->vbase + REG_ERRCTRL_OFFSET);
742
743 if (linkerr & HT_LINKERR_DETECTED)
744 __raw_writel(HT_LINKERR_DETECTED,
745 dev_info->vbase + REG_LINKERR_OFFSET);
746
747 edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name);
748 }
749
750 static struct cpc925_dev_info cpc925_devs[] = {
751 {
752 .ctl_name = CPC925_CPU_ERR_DEV,
753 .init = cpc925_cpu_init,
754 .exit = cpc925_cpu_exit,
755 .check = cpc925_cpu_check,
756 },
757 {
758 .ctl_name = CPC925_HT_LINK_DEV,
759 .init = cpc925_htlink_init,
760 .exit = cpc925_htlink_exit,
761 .check = cpc925_htlink_check,
762 },
763 { }
764 };
765
766 /*
767 * Add CPU Err detection and HyperTransport Link Err detection
768 * as common "edac_device", they have no corresponding device
769 * nodes in the Open Firmware DTB and we have to add platform
770 * devices for them. Also, they will share the MMIO with that
771 * of memory controller.
772 */
cpc925_add_edac_devices(void __iomem * vbase)773 static void cpc925_add_edac_devices(void __iomem *vbase)
774 {
775 struct cpc925_dev_info *dev_info;
776
777 if (!vbase) {
778 cpc925_printk(KERN_ERR, "MMIO not established yet\n");
779 return;
780 }
781
782 for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) {
783 dev_info->vbase = vbase;
784 dev_info->pdev = platform_device_register_simple(
785 dev_info->ctl_name, 0, NULL, 0);
786 if (IS_ERR(dev_info->pdev)) {
787 cpc925_printk(KERN_ERR,
788 "Can't register platform device for %s\n",
789 dev_info->ctl_name);
790 continue;
791 }
792
793 /*
794 * Don't have to allocate private structure but
795 * make use of cpc925_devs[] instead.
796 */
797 dev_info->edac_idx = edac_device_alloc_index();
798 dev_info->edac_dev =
799 edac_device_alloc_ctl_info(0, dev_info->ctl_name,
800 1, NULL, 0, 0, NULL, 0, dev_info->edac_idx);
801 if (!dev_info->edac_dev) {
802 cpc925_printk(KERN_ERR, "No memory for edac device\n");
803 goto err1;
804 }
805
806 dev_info->edac_dev->pvt_info = dev_info;
807 dev_info->edac_dev->dev = &dev_info->pdev->dev;
808 dev_info->edac_dev->ctl_name = dev_info->ctl_name;
809 dev_info->edac_dev->mod_name = CPC925_EDAC_MOD_STR;
810 dev_info->edac_dev->dev_name = dev_name(&dev_info->pdev->dev);
811
812 if (edac_op_state == EDAC_OPSTATE_POLL)
813 dev_info->edac_dev->edac_check = dev_info->check;
814
815 if (dev_info->init)
816 dev_info->init(dev_info);
817
818 if (edac_device_add_device(dev_info->edac_dev) > 0) {
819 cpc925_printk(KERN_ERR,
820 "Unable to add edac device for %s\n",
821 dev_info->ctl_name);
822 goto err2;
823 }
824
825 edac_dbg(0, "Successfully added edac device for %s\n",
826 dev_info->ctl_name);
827
828 continue;
829
830 err2:
831 if (dev_info->exit)
832 dev_info->exit(dev_info);
833 edac_device_free_ctl_info(dev_info->edac_dev);
834 err1:
835 platform_device_unregister(dev_info->pdev);
836 }
837 }
838
839 /*
840 * Delete the common "edac_device" for CPU Err Detection
841 * and HyperTransport Link Err Detection
842 */
cpc925_del_edac_devices(void)843 static void cpc925_del_edac_devices(void)
844 {
845 struct cpc925_dev_info *dev_info;
846
847 for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) {
848 if (dev_info->edac_dev) {
849 edac_device_del_device(dev_info->edac_dev->dev);
850 edac_device_free_ctl_info(dev_info->edac_dev);
851 platform_device_unregister(dev_info->pdev);
852 }
853
854 if (dev_info->exit)
855 dev_info->exit(dev_info);
856
857 edac_dbg(0, "Successfully deleted edac device for %s\n",
858 dev_info->ctl_name);
859 }
860 }
861
862 /* Convert current back-ground scrub rate into byte/sec bandwidth */
cpc925_get_sdram_scrub_rate(struct mem_ctl_info * mci)863 static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci)
864 {
865 struct cpc925_mc_pdata *pdata = mci->pvt_info;
866 int bw;
867 u32 mscr;
868 u8 si;
869
870 mscr = __raw_readl(pdata->vbase + REG_MSCR_OFFSET);
871 si = (mscr & MSCR_SI_MASK) >> MSCR_SI_SHIFT;
872
873 edac_dbg(0, "Mem Scrub Ctrl Register 0x%x\n", mscr);
874
875 if (((mscr & MSCR_SCRUB_MOD_MASK) != MSCR_BACKGR_SCRUB) ||
876 (si == 0)) {
877 cpc925_mc_printk(mci, KERN_INFO, "Scrub mode not enabled\n");
878 bw = 0;
879 } else
880 bw = CPC925_SCRUB_BLOCK_SIZE * 0xFA67 / si;
881
882 return bw;
883 }
884
885 /* Return 0 for single channel; 1 for dual channel */
cpc925_mc_get_channels(void __iomem * vbase)886 static int cpc925_mc_get_channels(void __iomem *vbase)
887 {
888 int dual = 0;
889 u32 mbcr;
890
891 mbcr = __raw_readl(vbase + REG_MBCR_OFFSET);
892
893 /*
894 * Dual channel only when 128-bit wide physical bus
895 * and 128-bit configuration.
896 */
897 if (((mbcr & MBCR_64BITCFG_MASK) == 0) &&
898 ((mbcr & MBCR_64BITBUS_MASK) == 0))
899 dual = 1;
900
901 edac_dbg(0, "%s channel\n", (dual > 0) ? "Dual" : "Single");
902
903 return dual;
904 }
905
cpc925_probe(struct platform_device * pdev)906 static int cpc925_probe(struct platform_device *pdev)
907 {
908 static int edac_mc_idx;
909 struct mem_ctl_info *mci;
910 struct edac_mc_layer layers[2];
911 void __iomem *vbase;
912 struct cpc925_mc_pdata *pdata;
913 struct resource *r;
914 int res = 0, nr_channels;
915
916 edac_dbg(0, "%s platform device found!\n", pdev->name);
917
918 if (!devres_open_group(&pdev->dev, cpc925_probe, GFP_KERNEL)) {
919 res = -ENOMEM;
920 goto out;
921 }
922
923 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
924 if (!r) {
925 cpc925_printk(KERN_ERR, "Unable to get resource\n");
926 res = -ENOENT;
927 goto err1;
928 }
929
930 if (!devm_request_mem_region(&pdev->dev,
931 r->start,
932 resource_size(r),
933 pdev->name)) {
934 cpc925_printk(KERN_ERR, "Unable to request mem region\n");
935 res = -EBUSY;
936 goto err1;
937 }
938
939 vbase = devm_ioremap(&pdev->dev, r->start, resource_size(r));
940 if (!vbase) {
941 cpc925_printk(KERN_ERR, "Unable to ioremap device\n");
942 res = -ENOMEM;
943 goto err2;
944 }
945
946 nr_channels = cpc925_mc_get_channels(vbase) + 1;
947
948 layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
949 layers[0].size = CPC925_NR_CSROWS;
950 layers[0].is_virt_csrow = true;
951 layers[1].type = EDAC_MC_LAYER_CHANNEL;
952 layers[1].size = nr_channels;
953 layers[1].is_virt_csrow = false;
954 mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers,
955 sizeof(struct cpc925_mc_pdata));
956 if (!mci) {
957 cpc925_printk(KERN_ERR, "No memory for mem_ctl_info\n");
958 res = -ENOMEM;
959 goto err2;
960 }
961
962 pdata = mci->pvt_info;
963 pdata->vbase = vbase;
964 pdata->edac_idx = edac_mc_idx++;
965 pdata->name = pdev->name;
966
967 mci->pdev = &pdev->dev;
968 platform_set_drvdata(pdev, mci);
969 mci->dev_name = dev_name(&pdev->dev);
970 mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR;
971 mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
972 mci->edac_cap = EDAC_FLAG_SECDED;
973 mci->mod_name = CPC925_EDAC_MOD_STR;
974 mci->ctl_name = pdev->name;
975
976 if (edac_op_state == EDAC_OPSTATE_POLL)
977 mci->edac_check = cpc925_mc_check;
978
979 mci->ctl_page_to_phys = NULL;
980 mci->scrub_mode = SCRUB_SW_SRC;
981 mci->set_sdram_scrub_rate = NULL;
982 mci->get_sdram_scrub_rate = cpc925_get_sdram_scrub_rate;
983
984 cpc925_init_csrows(mci);
985
986 /* Setup memory controller registers */
987 cpc925_mc_init(mci);
988
989 if (edac_mc_add_mc(mci) > 0) {
990 cpc925_mc_printk(mci, KERN_ERR, "Failed edac_mc_add_mc()\n");
991 goto err3;
992 }
993
994 cpc925_add_edac_devices(vbase);
995
996 /* get this far and it's successful */
997 edac_dbg(0, "success\n");
998
999 res = 0;
1000 goto out;
1001
1002 err3:
1003 cpc925_mc_exit(mci);
1004 edac_mc_free(mci);
1005 err2:
1006 devm_release_mem_region(&pdev->dev, r->start, resource_size(r));
1007 err1:
1008 devres_release_group(&pdev->dev, cpc925_probe);
1009 out:
1010 return res;
1011 }
1012
cpc925_remove(struct platform_device * pdev)1013 static int cpc925_remove(struct platform_device *pdev)
1014 {
1015 struct mem_ctl_info *mci = platform_get_drvdata(pdev);
1016
1017 /*
1018 * Delete common edac devices before edac mc, because
1019 * the former share the MMIO of the latter.
1020 */
1021 cpc925_del_edac_devices();
1022 cpc925_mc_exit(mci);
1023
1024 edac_mc_del_mc(&pdev->dev);
1025 edac_mc_free(mci);
1026
1027 return 0;
1028 }
1029
1030 static struct platform_driver cpc925_edac_driver = {
1031 .probe = cpc925_probe,
1032 .remove = cpc925_remove,
1033 .driver = {
1034 .name = "cpc925_edac",
1035 }
1036 };
1037
cpc925_edac_init(void)1038 static int __init cpc925_edac_init(void)
1039 {
1040 int ret = 0;
1041
1042 printk(KERN_INFO "IBM CPC925 EDAC driver " CPC925_EDAC_REVISION "\n");
1043 printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc\n");
1044
1045 /* Only support POLL mode so far */
1046 edac_op_state = EDAC_OPSTATE_POLL;
1047
1048 ret = platform_driver_register(&cpc925_edac_driver);
1049 if (ret) {
1050 printk(KERN_WARNING "Failed to register %s\n",
1051 CPC925_EDAC_MOD_STR);
1052 }
1053
1054 return ret;
1055 }
1056
cpc925_edac_exit(void)1057 static void __exit cpc925_edac_exit(void)
1058 {
1059 platform_driver_unregister(&cpc925_edac_driver);
1060 }
1061
1062 module_init(cpc925_edac_init);
1063 module_exit(cpc925_edac_exit);
1064
1065 MODULE_LICENSE("GPL");
1066 MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>");
1067 MODULE_DESCRIPTION("IBM CPC925 Bridge and MC EDAC kernel module");
1068