1 /* 2 * AMD64 class Memory Controller kernel module 3 * 4 * Copyright (c) 2009 SoftwareBitMaker. 5 * Copyright (c) 2009 Advanced Micro Devices, Inc. 6 * 7 * This file may be distributed under the terms of the 8 * GNU General Public License. 9 * 10 * Originally Written by Thayne Harbaugh 11 * 12 * Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>: 13 * - K8 CPU Revision D and greater support 14 * 15 * Changes by Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>: 16 * - Module largely rewritten, with new (and hopefully correct) 17 * code for dealing with node and chip select interleaving, 18 * various code cleanup, and bug fixes 19 * - Added support for memory hoisting using DRAM hole address 20 * register 21 * 22 * Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>: 23 * -K8 Rev (1207) revision support added, required Revision 24 * specific mini-driver code to support Rev F as well as 25 * prior revisions 26 * 27 * Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>: 28 * -Family 10h revision support added. New PCI Device IDs, 29 * indicating new changes. Actual registers modified 30 * were slight, less than the Rev E to Rev F transition 31 * but changing the PCI Device ID was the proper thing to 32 * do, as it provides for almost automactic family 33 * detection. The mods to Rev F required more family 34 * information detection. 35 * 36 * Changes/Fixes by Borislav Petkov <bp@alien8.de>: 37 * - misc fixes and code cleanups 38 * 39 * This module is based on the following documents 40 * (available from http://www.amd.com/): 41 * 42 * Title: BIOS and Kernel Developer's Guide for AMD Athlon 64 and AMD 43 * Opteron Processors 44 * AMD publication #: 26094 45 *` Revision: 3.26 46 * 47 * Title: BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh 48 * Processors 49 * AMD publication #: 32559 50 * Revision: 3.00 51 * Issue Date: May 2006 52 * 53 * Title: BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h 54 * Processors 55 * AMD publication #: 31116 56 * Revision: 3.00 57 * Issue Date: September 07, 2007 58 * 59 * Sections in the first 2 documents are no longer in sync with each other. 60 * The Family 10h BKDG was totally re-written from scratch with a new 61 * presentation model. 62 * Therefore, comments that refer to a Document section might be off. 63 */ 64 65 #include <linux/module.h> 66 #include <linux/ctype.h> 67 #include <linux/init.h> 68 #include <linux/pci.h> 69 #include <linux/pci_ids.h> 70 #include <linux/slab.h> 71 #include <linux/mmzone.h> 72 #include <linux/edac.h> 73 #include <asm/msr.h> 74 #include "edac_core.h" 75 #include "mce_amd.h" 76 77 #define amd64_debug(fmt, arg...) \ 78 edac_printk(KERN_DEBUG, "amd64", fmt, ##arg) 79 80 #define amd64_info(fmt, arg...) \ 81 edac_printk(KERN_INFO, "amd64", fmt, ##arg) 82 83 #define amd64_notice(fmt, arg...) \ 84 edac_printk(KERN_NOTICE, "amd64", fmt, ##arg) 85 86 #define amd64_warn(fmt, arg...) \ 87 edac_printk(KERN_WARNING, "amd64", fmt, ##arg) 88 89 #define amd64_err(fmt, arg...) \ 90 edac_printk(KERN_ERR, "amd64", fmt, ##arg) 91 92 #define amd64_mc_warn(mci, fmt, arg...) \ 93 edac_mc_chipset_printk(mci, KERN_WARNING, "amd64", fmt, ##arg) 94 95 #define amd64_mc_err(mci, fmt, arg...) \ 96 edac_mc_chipset_printk(mci, KERN_ERR, "amd64", fmt, ##arg) 97 98 /* 99 * Throughout the comments in this code, the following terms are used: 100 * 101 * SysAddr, DramAddr, and InputAddr 102 * 103 * These terms come directly from the amd64 documentation 104 * (AMD publication #26094). They are defined as follows: 105 * 106 * SysAddr: 107 * This is a physical address generated by a CPU core or a device 108 * doing DMA. If generated by a CPU core, a SysAddr is the result of 109 * a virtual to physical address translation by the CPU core's address 110 * translation mechanism (MMU). 111 * 112 * DramAddr: 113 * A DramAddr is derived from a SysAddr by subtracting an offset that 114 * depends on which node the SysAddr maps to and whether the SysAddr 115 * is within a range affected by memory hoisting. The DRAM Base 116 * (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers 117 * determine which node a SysAddr maps to. 118 * 119 * If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr 120 * is within the range of addresses specified by this register, then 121 * a value x from the DHAR is subtracted from the SysAddr to produce a 122 * DramAddr. Here, x represents the base address for the node that 123 * the SysAddr maps to plus an offset due to memory hoisting. See 124 * section 3.4.8 and the comments in amd64_get_dram_hole_info() and 125 * sys_addr_to_dram_addr() below for more information. 126 * 127 * If the SysAddr is not affected by the DHAR then a value y is 128 * subtracted from the SysAddr to produce a DramAddr. Here, y is the 129 * base address for the node that the SysAddr maps to. See section 130 * 3.4.4 and the comments in sys_addr_to_dram_addr() below for more 131 * information. 132 * 133 * InputAddr: 134 * A DramAddr is translated to an InputAddr before being passed to the 135 * memory controller for the node that the DramAddr is associated 136 * with. The memory controller then maps the InputAddr to a csrow. 137 * If node interleaving is not in use, then the InputAddr has the same 138 * value as the DramAddr. Otherwise, the InputAddr is produced by 139 * discarding the bits used for node interleaving from the DramAddr. 140 * See section 3.4.4 for more information. 141 * 142 * The memory controller for a given node uses its DRAM CS Base and 143 * DRAM CS Mask registers to map an InputAddr to a csrow. See 144 * sections 3.5.4 and 3.5.5 for more information. 145 */ 146 147 #define EDAC_AMD64_VERSION "3.4.0" 148 #define EDAC_MOD_STR "amd64_edac" 149 150 /* Extended Model from CPUID, for CPU Revision numbers */ 151 #define K8_REV_D 1 152 #define K8_REV_E 2 153 #define K8_REV_F 4 154 155 /* Hardware limit on ChipSelect rows per MC and processors per system */ 156 #define NUM_CHIPSELECTS 8 157 #define DRAM_RANGES 8 158 159 #define ON true 160 #define OFF false 161 162 /* 163 * PCI-defined configuration space registers 164 */ 165 #define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b 166 #define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c 167 #define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601 168 #define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602 169 #define PCI_DEVICE_ID_AMD_16H_NB_F1 0x1531 170 #define PCI_DEVICE_ID_AMD_16H_NB_F2 0x1532 171 172 /* 173 * Function 1 - Address Map 174 */ 175 #define DRAM_BASE_LO 0x40 176 #define DRAM_LIMIT_LO 0x44 177 178 /* 179 * F15 M30h D18F1x2[1C:00] 180 */ 181 #define DRAM_CONT_BASE 0x200 182 #define DRAM_CONT_LIMIT 0x204 183 184 /* 185 * F15 M30h D18F1x2[4C:40] 186 */ 187 #define DRAM_CONT_HIGH_OFF 0x240 188 189 #define dram_rw(pvt, i) ((u8)(pvt->ranges[i].base.lo & 0x3)) 190 #define dram_intlv_sel(pvt, i) ((u8)((pvt->ranges[i].lim.lo >> 8) & 0x7)) 191 #define dram_dst_node(pvt, i) ((u8)(pvt->ranges[i].lim.lo & 0x7)) 192 193 #define DHAR 0xf0 194 #define dhar_mem_hoist_valid(pvt) ((pvt)->dhar & BIT(1)) 195 #define dhar_base(pvt) ((pvt)->dhar & 0xff000000) 196 #define k8_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff00) << 16) 197 198 /* NOTE: Extra mask bit vs K8 */ 199 #define f10_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff80) << 16) 200 201 #define DCT_CFG_SEL 0x10C 202 203 #define DRAM_LOCAL_NODE_BASE 0x120 204 #define DRAM_LOCAL_NODE_LIM 0x124 205 206 #define DRAM_BASE_HI 0x140 207 #define DRAM_LIMIT_HI 0x144 208 209 210 /* 211 * Function 2 - DRAM controller 212 */ 213 #define DCSB0 0x40 214 #define DCSB1 0x140 215 #define DCSB_CS_ENABLE BIT(0) 216 217 #define DCSM0 0x60 218 #define DCSM1 0x160 219 220 #define csrow_enabled(i, dct, pvt) ((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE) 221 222 #define DBAM0 0x80 223 #define DBAM1 0x180 224 225 /* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */ 226 #define DBAM_DIMM(i, reg) ((((reg) >> (4*(i)))) & 0xF) 227 228 #define DBAM_MAX_VALUE 11 229 230 #define DCLR0 0x90 231 #define DCLR1 0x190 232 #define REVE_WIDTH_128 BIT(16) 233 #define WIDTH_128 BIT(11) 234 235 #define DCHR0 0x94 236 #define DCHR1 0x194 237 #define DDR3_MODE BIT(8) 238 239 #define DCT_SEL_LO 0x110 240 #define dct_high_range_enabled(pvt) ((pvt)->dct_sel_lo & BIT(0)) 241 #define dct_interleave_enabled(pvt) ((pvt)->dct_sel_lo & BIT(2)) 242 243 #define dct_ganging_enabled(pvt) ((boot_cpu_data.x86 == 0x10) && ((pvt)->dct_sel_lo & BIT(4))) 244 245 #define dct_data_intlv_enabled(pvt) ((pvt)->dct_sel_lo & BIT(5)) 246 #define dct_memory_cleared(pvt) ((pvt)->dct_sel_lo & BIT(10)) 247 248 #define SWAP_INTLV_REG 0x10c 249 250 #define DCT_SEL_HI 0x114 251 252 /* 253 * Function 3 - Misc Control 254 */ 255 #define NBCTL 0x40 256 257 #define NBCFG 0x44 258 #define NBCFG_CHIPKILL BIT(23) 259 #define NBCFG_ECC_ENABLE BIT(22) 260 261 /* F3x48: NBSL */ 262 #define F10_NBSL_EXT_ERR_ECC 0x8 263 #define NBSL_PP_OBS 0x2 264 265 #define SCRCTRL 0x58 266 267 #define F10_ONLINE_SPARE 0xB0 268 #define online_spare_swap_done(pvt, c) (((pvt)->online_spare >> (1 + 2 * (c))) & 0x1) 269 #define online_spare_bad_dramcs(pvt, c) (((pvt)->online_spare >> (4 + 4 * (c))) & 0x7) 270 271 #define F10_NB_ARRAY_ADDR 0xB8 272 #define F10_NB_ARRAY_DRAM BIT(31) 273 274 /* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline */ 275 #define SET_NB_ARRAY_ADDR(section) (((section) & 0x3) << 1) 276 277 #define F10_NB_ARRAY_DATA 0xBC 278 #define F10_NB_ARR_ECC_WR_REQ BIT(17) 279 #define SET_NB_DRAM_INJECTION_WRITE(inj) \ 280 (BIT(((inj.word) & 0xF) + 20) | \ 281 F10_NB_ARR_ECC_WR_REQ | inj.bit_map) 282 #define SET_NB_DRAM_INJECTION_READ(inj) \ 283 (BIT(((inj.word) & 0xF) + 20) | \ 284 BIT(16) | inj.bit_map) 285 286 287 #define NBCAP 0xE8 288 #define NBCAP_CHIPKILL BIT(4) 289 #define NBCAP_SECDED BIT(3) 290 #define NBCAP_DCT_DUAL BIT(0) 291 292 #define EXT_NB_MCA_CFG 0x180 293 294 /* MSRs */ 295 #define MSR_MCGCTL_NBE BIT(4) 296 297 enum amd_families { 298 K8_CPUS = 0, 299 F10_CPUS, 300 F15_CPUS, 301 F15_M30H_CPUS, 302 F16_CPUS, 303 NUM_FAMILIES, 304 }; 305 306 /* Error injection control structure */ 307 struct error_injection { 308 u32 section; 309 u32 word; 310 u32 bit_map; 311 }; 312 313 /* low and high part of PCI config space regs */ 314 struct reg_pair { 315 u32 lo, hi; 316 }; 317 318 /* 319 * See F1x[1, 0][7C:40] DRAM Base/Limit Registers 320 */ 321 struct dram_range { 322 struct reg_pair base; 323 struct reg_pair lim; 324 }; 325 326 /* A DCT chip selects collection */ 327 struct chip_select { 328 u32 csbases[NUM_CHIPSELECTS]; 329 u8 b_cnt; 330 331 u32 csmasks[NUM_CHIPSELECTS]; 332 u8 m_cnt; 333 }; 334 335 struct amd64_pvt { 336 struct low_ops *ops; 337 338 /* pci_device handles which we utilize */ 339 struct pci_dev *F1, *F2, *F3; 340 341 u16 mc_node_id; /* MC index of this MC node */ 342 u8 fam; /* CPU family */ 343 u8 model; /* ... model */ 344 u8 stepping; /* ... stepping */ 345 346 int ext_model; /* extended model value of this node */ 347 int channel_count; 348 349 /* Raw registers */ 350 u32 dclr0; /* DRAM Configuration Low DCT0 reg */ 351 u32 dclr1; /* DRAM Configuration Low DCT1 reg */ 352 u32 dchr0; /* DRAM Configuration High DCT0 reg */ 353 u32 dchr1; /* DRAM Configuration High DCT1 reg */ 354 u32 nbcap; /* North Bridge Capabilities */ 355 u32 nbcfg; /* F10 North Bridge Configuration */ 356 u32 ext_nbcfg; /* Extended F10 North Bridge Configuration */ 357 u32 dhar; /* DRAM Hoist reg */ 358 u32 dbam0; /* DRAM Base Address Mapping reg for DCT0 */ 359 u32 dbam1; /* DRAM Base Address Mapping reg for DCT1 */ 360 361 /* one for each DCT */ 362 struct chip_select csels[2]; 363 364 /* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */ 365 struct dram_range ranges[DRAM_RANGES]; 366 367 u64 top_mem; /* top of memory below 4GB */ 368 u64 top_mem2; /* top of memory above 4GB */ 369 370 u32 dct_sel_lo; /* DRAM Controller Select Low */ 371 u32 dct_sel_hi; /* DRAM Controller Select High */ 372 u32 online_spare; /* On-Line spare Reg */ 373 374 /* x4 or x8 syndromes in use */ 375 u8 ecc_sym_sz; 376 377 /* place to store error injection parameters prior to issue */ 378 struct error_injection injection; 379 }; 380 381 enum err_codes { 382 DECODE_OK = 0, 383 ERR_NODE = -1, 384 ERR_CSROW = -2, 385 ERR_CHANNEL = -3, 386 }; 387 388 struct err_info { 389 int err_code; 390 struct mem_ctl_info *src_mci; 391 int csrow; 392 int channel; 393 u16 syndrome; 394 u32 page; 395 u32 offset; 396 }; 397 398 static inline u64 get_dram_base(struct amd64_pvt *pvt, u8 i) 399 { 400 u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8; 401 402 if (boot_cpu_data.x86 == 0xf) 403 return addr; 404 405 return (((u64)pvt->ranges[i].base.hi & 0x000000ff) << 40) | addr; 406 } 407 408 static inline u64 get_dram_limit(struct amd64_pvt *pvt, u8 i) 409 { 410 u64 lim = (((u64)pvt->ranges[i].lim.lo & 0xffff0000) << 8) | 0x00ffffff; 411 412 if (boot_cpu_data.x86 == 0xf) 413 return lim; 414 415 return (((u64)pvt->ranges[i].lim.hi & 0x000000ff) << 40) | lim; 416 } 417 418 static inline u16 extract_syndrome(u64 status) 419 { 420 return ((status >> 47) & 0xff) | ((status >> 16) & 0xff00); 421 } 422 423 static inline u8 dct_sel_interleave_addr(struct amd64_pvt *pvt) 424 { 425 if (pvt->fam == 0x15 && pvt->model >= 0x30) 426 return (((pvt->dct_sel_hi >> 9) & 0x1) << 2) | 427 ((pvt->dct_sel_lo >> 6) & 0x3); 428 429 return ((pvt)->dct_sel_lo >> 6) & 0x3; 430 } 431 /* 432 * per-node ECC settings descriptor 433 */ 434 struct ecc_settings { 435 u32 old_nbctl; 436 bool nbctl_valid; 437 438 struct flags { 439 unsigned long nb_mce_enable:1; 440 unsigned long nb_ecc_prev:1; 441 } flags; 442 }; 443 444 #ifdef CONFIG_EDAC_DEBUG 445 int amd64_create_sysfs_dbg_files(struct mem_ctl_info *mci); 446 void amd64_remove_sysfs_dbg_files(struct mem_ctl_info *mci); 447 448 #else 449 static inline int amd64_create_sysfs_dbg_files(struct mem_ctl_info *mci) 450 { 451 return 0; 452 } 453 static void inline amd64_remove_sysfs_dbg_files(struct mem_ctl_info *mci) 454 { 455 } 456 #endif 457 458 #ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION 459 int amd64_create_sysfs_inject_files(struct mem_ctl_info *mci); 460 void amd64_remove_sysfs_inject_files(struct mem_ctl_info *mci); 461 462 #else 463 static inline int amd64_create_sysfs_inject_files(struct mem_ctl_info *mci) 464 { 465 return 0; 466 } 467 static inline void amd64_remove_sysfs_inject_files(struct mem_ctl_info *mci) 468 { 469 } 470 #endif 471 472 /* 473 * Each of the PCI Device IDs types have their own set of hardware accessor 474 * functions and per device encoding/decoding logic. 475 */ 476 struct low_ops { 477 int (*early_channel_count) (struct amd64_pvt *pvt); 478 void (*map_sysaddr_to_csrow) (struct mem_ctl_info *mci, u64 sys_addr, 479 struct err_info *); 480 int (*dbam_to_cs) (struct amd64_pvt *pvt, u8 dct, unsigned cs_mode); 481 int (*read_dct_pci_cfg) (struct amd64_pvt *pvt, int offset, 482 u32 *val, const char *func); 483 }; 484 485 struct amd64_family_type { 486 const char *ctl_name; 487 u16 f1_id, f3_id; 488 struct low_ops ops; 489 }; 490 491 int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset, 492 u32 *val, const char *func); 493 int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset, 494 u32 val, const char *func); 495 496 #define amd64_read_pci_cfg(pdev, offset, val) \ 497 __amd64_read_pci_cfg_dword(pdev, offset, val, __func__) 498 499 #define amd64_write_pci_cfg(pdev, offset, val) \ 500 __amd64_write_pci_cfg_dword(pdev, offset, val, __func__) 501 502 #define amd64_read_dct_pci_cfg(pvt, offset, val) \ 503 pvt->ops->read_dct_pci_cfg(pvt, offset, val, __func__) 504 505 int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base, 506 u64 *hole_offset, u64 *hole_size); 507 508 #define to_mci(k) container_of(k, struct mem_ctl_info, dev) 509 510 /* Injection helpers */ 511 static inline void disable_caches(void *dummy) 512 { 513 write_cr0(read_cr0() | X86_CR0_CD); 514 wbinvd(); 515 } 516 517 static inline void enable_caches(void *dummy) 518 { 519 write_cr0(read_cr0() & ~X86_CR0_CD); 520 } 521 522 static inline u8 dram_intlv_en(struct amd64_pvt *pvt, unsigned int i) 523 { 524 if (pvt->fam == 0x15 && pvt->model >= 0x30) { 525 u32 tmp; 526 amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &tmp); 527 return (u8) tmp & 0xF; 528 } 529 return (u8) (pvt->ranges[i].base.lo >> 8) & 0x7; 530 } 531 532 static inline u8 dhar_valid(struct amd64_pvt *pvt) 533 { 534 if (pvt->fam == 0x15 && pvt->model >= 0x30) { 535 u32 tmp; 536 amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp); 537 return (tmp >> 1) & BIT(0); 538 } 539 return (pvt)->dhar & BIT(0); 540 } 541 542 static inline u32 dct_sel_baseaddr(struct amd64_pvt *pvt) 543 { 544 if (pvt->fam == 0x15 && pvt->model >= 0x30) { 545 u32 tmp; 546 amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp); 547 return (tmp >> 11) & 0x1FFF; 548 } 549 return (pvt)->dct_sel_lo & 0xFFFFF800; 550 } 551