xref: /openbmc/linux/drivers/edac/amd64_edac.h (revision 8b036556)
1 /*
2  * AMD64 class Memory Controller kernel module
3  *
4  * Copyright (c) 2009 SoftwareBitMaker.
5  * Copyright (c) 2009 Advanced Micro Devices, Inc.
6  *
7  * This file may be distributed under the terms of the
8  * GNU General Public License.
9  *
10  *	Originally Written by Thayne Harbaugh
11  *
12  *      Changes by Douglas "norsk" Thompson  <dougthompson@xmission.com>:
13  *		- K8 CPU Revision D and greater support
14  *
15  *      Changes by Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>:
16  *		- Module largely rewritten, with new (and hopefully correct)
17  *		code for dealing with node and chip select interleaving,
18  *		various code cleanup, and bug fixes
19  *		- Added support for memory hoisting using DRAM hole address
20  *		register
21  *
22  *	Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>:
23  *		-K8 Rev (1207) revision support added, required Revision
24  *		specific mini-driver code to support Rev F as well as
25  *		prior revisions
26  *
27  *	Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>:
28  *		-Family 10h revision support added. New PCI Device IDs,
29  *		indicating new changes. Actual registers modified
30  *		were slight, less than the Rev E to Rev F transition
31  *		but changing the PCI Device ID was the proper thing to
32  *		do, as it provides for almost automactic family
33  *		detection. The mods to Rev F required more family
34  *		information detection.
35  *
36  *	Changes/Fixes by Borislav Petkov <bp@alien8.de>:
37  *		- misc fixes and code cleanups
38  *
39  * This module is based on the following documents
40  * (available from http://www.amd.com/):
41  *
42  *	Title:	BIOS and Kernel Developer's Guide for AMD Athlon 64 and AMD
43  *		Opteron Processors
44  *	AMD publication #: 26094
45  *`	Revision: 3.26
46  *
47  *	Title:	BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh
48  *		Processors
49  *	AMD publication #: 32559
50  *	Revision: 3.00
51  *	Issue Date: May 2006
52  *
53  *	Title:	BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h
54  *		Processors
55  *	AMD publication #: 31116
56  *	Revision: 3.00
57  *	Issue Date: September 07, 2007
58  *
59  * Sections in the first 2 documents are no longer in sync with each other.
60  * The Family 10h BKDG was totally re-written from scratch with a new
61  * presentation model.
62  * Therefore, comments that refer to a Document section might be off.
63  */
64 
65 #include <linux/module.h>
66 #include <linux/ctype.h>
67 #include <linux/init.h>
68 #include <linux/pci.h>
69 #include <linux/pci_ids.h>
70 #include <linux/slab.h>
71 #include <linux/mmzone.h>
72 #include <linux/edac.h>
73 #include <asm/msr.h>
74 #include "edac_core.h"
75 #include "mce_amd.h"
76 
77 #define amd64_debug(fmt, arg...) \
78 	edac_printk(KERN_DEBUG, "amd64", fmt, ##arg)
79 
80 #define amd64_info(fmt, arg...) \
81 	edac_printk(KERN_INFO, "amd64", fmt, ##arg)
82 
83 #define amd64_notice(fmt, arg...) \
84 	edac_printk(KERN_NOTICE, "amd64", fmt, ##arg)
85 
86 #define amd64_warn(fmt, arg...) \
87 	edac_printk(KERN_WARNING, "amd64", fmt, ##arg)
88 
89 #define amd64_err(fmt, arg...) \
90 	edac_printk(KERN_ERR, "amd64", fmt, ##arg)
91 
92 #define amd64_mc_warn(mci, fmt, arg...) \
93 	edac_mc_chipset_printk(mci, KERN_WARNING, "amd64", fmt, ##arg)
94 
95 #define amd64_mc_err(mci, fmt, arg...) \
96 	edac_mc_chipset_printk(mci, KERN_ERR, "amd64", fmt, ##arg)
97 
98 /*
99  * Throughout the comments in this code, the following terms are used:
100  *
101  *	SysAddr, DramAddr, and InputAddr
102  *
103  *  These terms come directly from the amd64 documentation
104  * (AMD publication #26094).  They are defined as follows:
105  *
106  *     SysAddr:
107  *         This is a physical address generated by a CPU core or a device
108  *         doing DMA.  If generated by a CPU core, a SysAddr is the result of
109  *         a virtual to physical address translation by the CPU core's address
110  *         translation mechanism (MMU).
111  *
112  *     DramAddr:
113  *         A DramAddr is derived from a SysAddr by subtracting an offset that
114  *         depends on which node the SysAddr maps to and whether the SysAddr
115  *         is within a range affected by memory hoisting.  The DRAM Base
116  *         (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers
117  *         determine which node a SysAddr maps to.
118  *
119  *         If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr
120  *         is within the range of addresses specified by this register, then
121  *         a value x from the DHAR is subtracted from the SysAddr to produce a
122  *         DramAddr.  Here, x represents the base address for the node that
123  *         the SysAddr maps to plus an offset due to memory hoisting.  See
124  *         section 3.4.8 and the comments in amd64_get_dram_hole_info() and
125  *         sys_addr_to_dram_addr() below for more information.
126  *
127  *         If the SysAddr is not affected by the DHAR then a value y is
128  *         subtracted from the SysAddr to produce a DramAddr.  Here, y is the
129  *         base address for the node that the SysAddr maps to.  See section
130  *         3.4.4 and the comments in sys_addr_to_dram_addr() below for more
131  *         information.
132  *
133  *     InputAddr:
134  *         A DramAddr is translated to an InputAddr before being passed to the
135  *         memory controller for the node that the DramAddr is associated
136  *         with.  The memory controller then maps the InputAddr to a csrow.
137  *         If node interleaving is not in use, then the InputAddr has the same
138  *         value as the DramAddr.  Otherwise, the InputAddr is produced by
139  *         discarding the bits used for node interleaving from the DramAddr.
140  *         See section 3.4.4 for more information.
141  *
142  *         The memory controller for a given node uses its DRAM CS Base and
143  *         DRAM CS Mask registers to map an InputAddr to a csrow.  See
144  *         sections 3.5.4 and 3.5.5 for more information.
145  */
146 
147 #define EDAC_AMD64_VERSION		"3.4.0"
148 #define EDAC_MOD_STR			"amd64_edac"
149 
150 /* Extended Model from CPUID, for CPU Revision numbers */
151 #define K8_REV_D			1
152 #define K8_REV_E			2
153 #define K8_REV_F			4
154 
155 /* Hardware limit on ChipSelect rows per MC and processors per system */
156 #define NUM_CHIPSELECTS			8
157 #define DRAM_RANGES			8
158 
159 #define ON true
160 #define OFF false
161 
162 /*
163  * PCI-defined configuration space registers
164  */
165 #define PCI_DEVICE_ID_AMD_15H_NB_F1	0x1601
166 #define PCI_DEVICE_ID_AMD_15H_NB_F2	0x1602
167 #define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b
168 #define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c
169 #define PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 0x1571
170 #define PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 0x1572
171 #define PCI_DEVICE_ID_AMD_16H_NB_F1	0x1531
172 #define PCI_DEVICE_ID_AMD_16H_NB_F2	0x1532
173 #define PCI_DEVICE_ID_AMD_16H_M30H_NB_F1 0x1581
174 #define PCI_DEVICE_ID_AMD_16H_M30H_NB_F2 0x1582
175 
176 /*
177  * Function 1 - Address Map
178  */
179 #define DRAM_BASE_LO			0x40
180 #define DRAM_LIMIT_LO			0x44
181 
182 /*
183  * F15 M30h D18F1x2[1C:00]
184  */
185 #define DRAM_CONT_BASE			0x200
186 #define DRAM_CONT_LIMIT			0x204
187 
188 /*
189  * F15 M30h D18F1x2[4C:40]
190  */
191 #define DRAM_CONT_HIGH_OFF		0x240
192 
193 #define dram_rw(pvt, i)			((u8)(pvt->ranges[i].base.lo & 0x3))
194 #define dram_intlv_sel(pvt, i)		((u8)((pvt->ranges[i].lim.lo >> 8) & 0x7))
195 #define dram_dst_node(pvt, i)		((u8)(pvt->ranges[i].lim.lo & 0x7))
196 
197 #define DHAR				0xf0
198 #define dhar_mem_hoist_valid(pvt)	((pvt)->dhar & BIT(1))
199 #define dhar_base(pvt)			((pvt)->dhar & 0xff000000)
200 #define k8_dhar_offset(pvt)		(((pvt)->dhar & 0x0000ff00) << 16)
201 
202 					/* NOTE: Extra mask bit vs K8 */
203 #define f10_dhar_offset(pvt)		(((pvt)->dhar & 0x0000ff80) << 16)
204 
205 #define DCT_CFG_SEL			0x10C
206 
207 #define DRAM_LOCAL_NODE_BASE		0x120
208 #define DRAM_LOCAL_NODE_LIM		0x124
209 
210 #define DRAM_BASE_HI			0x140
211 #define DRAM_LIMIT_HI			0x144
212 
213 
214 /*
215  * Function 2 - DRAM controller
216  */
217 #define DCSB0				0x40
218 #define DCSB1				0x140
219 #define DCSB_CS_ENABLE			BIT(0)
220 
221 #define DCSM0				0x60
222 #define DCSM1				0x160
223 
224 #define csrow_enabled(i, dct, pvt)	((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE)
225 
226 #define DRAM_CONTROL			0x78
227 
228 #define DBAM0				0x80
229 #define DBAM1				0x180
230 
231 /* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */
232 #define DBAM_DIMM(i, reg)		((((reg) >> (4*(i)))) & 0xF)
233 
234 #define DBAM_MAX_VALUE			11
235 
236 #define DCLR0				0x90
237 #define DCLR1				0x190
238 #define REVE_WIDTH_128			BIT(16)
239 #define WIDTH_128			BIT(11)
240 
241 #define DCHR0				0x94
242 #define DCHR1				0x194
243 #define DDR3_MODE			BIT(8)
244 
245 #define DCT_SEL_LO			0x110
246 #define dct_high_range_enabled(pvt)	((pvt)->dct_sel_lo & BIT(0))
247 #define dct_interleave_enabled(pvt)	((pvt)->dct_sel_lo & BIT(2))
248 
249 #define dct_ganging_enabled(pvt)	((boot_cpu_data.x86 == 0x10) && ((pvt)->dct_sel_lo & BIT(4)))
250 
251 #define dct_data_intlv_enabled(pvt)	((pvt)->dct_sel_lo & BIT(5))
252 #define dct_memory_cleared(pvt)		((pvt)->dct_sel_lo & BIT(10))
253 
254 #define SWAP_INTLV_REG			0x10c
255 
256 #define DCT_SEL_HI			0x114
257 
258 /*
259  * Function 3 - Misc Control
260  */
261 #define NBCTL				0x40
262 
263 #define NBCFG				0x44
264 #define NBCFG_CHIPKILL			BIT(23)
265 #define NBCFG_ECC_ENABLE		BIT(22)
266 
267 /* F3x48: NBSL */
268 #define F10_NBSL_EXT_ERR_ECC		0x8
269 #define NBSL_PP_OBS			0x2
270 
271 #define SCRCTRL				0x58
272 
273 #define F10_ONLINE_SPARE		0xB0
274 #define online_spare_swap_done(pvt, c)	(((pvt)->online_spare >> (1 + 2 * (c))) & 0x1)
275 #define online_spare_bad_dramcs(pvt, c)	(((pvt)->online_spare >> (4 + 4 * (c))) & 0x7)
276 
277 #define F10_NB_ARRAY_ADDR		0xB8
278 #define F10_NB_ARRAY_DRAM		BIT(31)
279 
280 /* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline  */
281 #define SET_NB_ARRAY_ADDR(section)	(((section) & 0x3) << 1)
282 
283 #define F10_NB_ARRAY_DATA		0xBC
284 #define F10_NB_ARR_ECC_WR_REQ		BIT(17)
285 #define SET_NB_DRAM_INJECTION_WRITE(inj)  \
286 					(BIT(((inj.word) & 0xF) + 20) | \
287 					F10_NB_ARR_ECC_WR_REQ | inj.bit_map)
288 #define SET_NB_DRAM_INJECTION_READ(inj)  \
289 					(BIT(((inj.word) & 0xF) + 20) | \
290 					BIT(16) |  inj.bit_map)
291 
292 
293 #define NBCAP				0xE8
294 #define NBCAP_CHIPKILL			BIT(4)
295 #define NBCAP_SECDED			BIT(3)
296 #define NBCAP_DCT_DUAL			BIT(0)
297 
298 #define EXT_NB_MCA_CFG			0x180
299 
300 /* MSRs */
301 #define MSR_MCGCTL_NBE			BIT(4)
302 
303 enum amd_families {
304 	K8_CPUS = 0,
305 	F10_CPUS,
306 	F15_CPUS,
307 	F15_M30H_CPUS,
308 	F15_M60H_CPUS,
309 	F16_CPUS,
310 	F16_M30H_CPUS,
311 	NUM_FAMILIES,
312 };
313 
314 /* Error injection control structure */
315 struct error_injection {
316 	u32	 section;
317 	u32	 word;
318 	u32	 bit_map;
319 };
320 
321 /* low and high part of PCI config space regs */
322 struct reg_pair {
323 	u32 lo, hi;
324 };
325 
326 /*
327  * See F1x[1, 0][7C:40] DRAM Base/Limit Registers
328  */
329 struct dram_range {
330 	struct reg_pair base;
331 	struct reg_pair lim;
332 };
333 
334 /* A DCT chip selects collection */
335 struct chip_select {
336 	u32 csbases[NUM_CHIPSELECTS];
337 	u8 b_cnt;
338 
339 	u32 csmasks[NUM_CHIPSELECTS];
340 	u8 m_cnt;
341 };
342 
343 struct amd64_pvt {
344 	struct low_ops *ops;
345 
346 	/* pci_device handles which we utilize */
347 	struct pci_dev *F1, *F2, *F3;
348 
349 	u16 mc_node_id;		/* MC index of this MC node */
350 	u8 fam;			/* CPU family */
351 	u8 model;		/* ... model */
352 	u8 stepping;		/* ... stepping */
353 
354 	int ext_model;		/* extended model value of this node */
355 	int channel_count;
356 
357 	/* Raw registers */
358 	u32 dclr0;		/* DRAM Configuration Low DCT0 reg */
359 	u32 dclr1;		/* DRAM Configuration Low DCT1 reg */
360 	u32 dchr0;		/* DRAM Configuration High DCT0 reg */
361 	u32 dchr1;		/* DRAM Configuration High DCT1 reg */
362 	u32 nbcap;		/* North Bridge Capabilities */
363 	u32 nbcfg;		/* F10 North Bridge Configuration */
364 	u32 ext_nbcfg;		/* Extended F10 North Bridge Configuration */
365 	u32 dhar;		/* DRAM Hoist reg */
366 	u32 dbam0;		/* DRAM Base Address Mapping reg for DCT0 */
367 	u32 dbam1;		/* DRAM Base Address Mapping reg for DCT1 */
368 
369 	/* one for each DCT */
370 	struct chip_select csels[2];
371 
372 	/* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */
373 	struct dram_range ranges[DRAM_RANGES];
374 
375 	u64 top_mem;		/* top of memory below 4GB */
376 	u64 top_mem2;		/* top of memory above 4GB */
377 
378 	u32 dct_sel_lo;		/* DRAM Controller Select Low */
379 	u32 dct_sel_hi;		/* DRAM Controller Select High */
380 	u32 online_spare;	/* On-Line spare Reg */
381 
382 	/* x4 or x8 syndromes in use */
383 	u8 ecc_sym_sz;
384 
385 	/* place to store error injection parameters prior to issue */
386 	struct error_injection injection;
387 
388 	/* cache the dram_type */
389 	enum mem_type dram_type;
390 };
391 
392 enum err_codes {
393 	DECODE_OK	=  0,
394 	ERR_NODE	= -1,
395 	ERR_CSROW	= -2,
396 	ERR_CHANNEL	= -3,
397 };
398 
399 struct err_info {
400 	int err_code;
401 	struct mem_ctl_info *src_mci;
402 	int csrow;
403 	int channel;
404 	u16 syndrome;
405 	u32 page;
406 	u32 offset;
407 };
408 
409 static inline u64 get_dram_base(struct amd64_pvt *pvt, u8 i)
410 {
411 	u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8;
412 
413 	if (boot_cpu_data.x86 == 0xf)
414 		return addr;
415 
416 	return (((u64)pvt->ranges[i].base.hi & 0x000000ff) << 40) | addr;
417 }
418 
419 static inline u64 get_dram_limit(struct amd64_pvt *pvt, u8 i)
420 {
421 	u64 lim = (((u64)pvt->ranges[i].lim.lo & 0xffff0000) << 8) | 0x00ffffff;
422 
423 	if (boot_cpu_data.x86 == 0xf)
424 		return lim;
425 
426 	return (((u64)pvt->ranges[i].lim.hi & 0x000000ff) << 40) | lim;
427 }
428 
429 static inline u16 extract_syndrome(u64 status)
430 {
431 	return ((status >> 47) & 0xff) | ((status >> 16) & 0xff00);
432 }
433 
434 static inline u8 dct_sel_interleave_addr(struct amd64_pvt *pvt)
435 {
436 	if (pvt->fam == 0x15 && pvt->model >= 0x30)
437 		return (((pvt->dct_sel_hi >> 9) & 0x1) << 2) |
438 			((pvt->dct_sel_lo >> 6) & 0x3);
439 
440 	return	((pvt)->dct_sel_lo >> 6) & 0x3;
441 }
442 /*
443  * per-node ECC settings descriptor
444  */
445 struct ecc_settings {
446 	u32 old_nbctl;
447 	bool nbctl_valid;
448 
449 	struct flags {
450 		unsigned long nb_mce_enable:1;
451 		unsigned long nb_ecc_prev:1;
452 	} flags;
453 };
454 
455 #ifdef CONFIG_EDAC_DEBUG
456 int amd64_create_sysfs_dbg_files(struct mem_ctl_info *mci);
457 void amd64_remove_sysfs_dbg_files(struct mem_ctl_info *mci);
458 
459 #else
460 static inline int amd64_create_sysfs_dbg_files(struct mem_ctl_info *mci)
461 {
462 	return 0;
463 }
464 static void inline amd64_remove_sysfs_dbg_files(struct mem_ctl_info *mci)
465 {
466 }
467 #endif
468 
469 #ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION
470 int amd64_create_sysfs_inject_files(struct mem_ctl_info *mci);
471 void amd64_remove_sysfs_inject_files(struct mem_ctl_info *mci);
472 
473 #else
474 static inline int amd64_create_sysfs_inject_files(struct mem_ctl_info *mci)
475 {
476 	return 0;
477 }
478 static inline void amd64_remove_sysfs_inject_files(struct mem_ctl_info *mci)
479 {
480 }
481 #endif
482 
483 /*
484  * Each of the PCI Device IDs types have their own set of hardware accessor
485  * functions and per device encoding/decoding logic.
486  */
487 struct low_ops {
488 	int (*early_channel_count)	(struct amd64_pvt *pvt);
489 	void (*map_sysaddr_to_csrow)	(struct mem_ctl_info *mci, u64 sys_addr,
490 					 struct err_info *);
491 	int (*dbam_to_cs)		(struct amd64_pvt *pvt, u8 dct,
492 					 unsigned cs_mode, int cs_mask_nr);
493 };
494 
495 struct amd64_family_type {
496 	const char *ctl_name;
497 	u16 f1_id, f3_id;
498 	struct low_ops ops;
499 };
500 
501 int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
502 			       u32 *val, const char *func);
503 int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset,
504 				u32 val, const char *func);
505 
506 #define amd64_read_pci_cfg(pdev, offset, val)	\
507 	__amd64_read_pci_cfg_dword(pdev, offset, val, __func__)
508 
509 #define amd64_write_pci_cfg(pdev, offset, val)	\
510 	__amd64_write_pci_cfg_dword(pdev, offset, val, __func__)
511 
512 int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
513 			     u64 *hole_offset, u64 *hole_size);
514 
515 #define to_mci(k) container_of(k, struct mem_ctl_info, dev)
516 
517 /* Injection helpers */
518 static inline void disable_caches(void *dummy)
519 {
520 	write_cr0(read_cr0() | X86_CR0_CD);
521 	wbinvd();
522 }
523 
524 static inline void enable_caches(void *dummy)
525 {
526 	write_cr0(read_cr0() & ~X86_CR0_CD);
527 }
528 
529 static inline u8 dram_intlv_en(struct amd64_pvt *pvt, unsigned int i)
530 {
531 	if (pvt->fam == 0x15 && pvt->model >= 0x30) {
532 		u32 tmp;
533 		amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &tmp);
534 		return (u8) tmp & 0xF;
535 	}
536 	return (u8) (pvt->ranges[i].base.lo >> 8) & 0x7;
537 }
538 
539 static inline u8 dhar_valid(struct amd64_pvt *pvt)
540 {
541 	if (pvt->fam == 0x15 && pvt->model >= 0x30) {
542 		u32 tmp;
543 		amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
544 		return (tmp >> 1) & BIT(0);
545 	}
546 	return (pvt)->dhar & BIT(0);
547 }
548 
549 static inline u32 dct_sel_baseaddr(struct amd64_pvt *pvt)
550 {
551 	if (pvt->fam == 0x15 && pvt->model >= 0x30) {
552 		u32 tmp;
553 		amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
554 		return (tmp >> 11) & 0x1FFF;
555 	}
556 	return (pvt)->dct_sel_lo & 0xFFFFF800;
557 }
558