1# 2# EDAC Kconfig 3# Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com 4# Licensed and distributed under the GPL 5 6config EDAC_ATOMIC_SCRUB 7 bool 8 9config EDAC_SUPPORT 10 bool 11 12menuconfig EDAC 13 tristate "EDAC (Error Detection And Correction) reporting" 14 depends on HAS_IOMEM && EDAC_SUPPORT && RAS 15 help 16 EDAC is a subsystem along with hardware-specific drivers designed to 17 report hardware errors. These are low-level errors that are reported 18 in the CPU or supporting chipset or other subsystems: 19 memory errors, cache errors, PCI errors, thermal throttling, etc.. 20 If unsure, select 'Y'. 21 22 The mailing list for the EDAC project is linux-edac@vger.kernel.org. 23 24if EDAC 25 26config EDAC_LEGACY_SYSFS 27 bool "EDAC legacy sysfs" 28 default y 29 help 30 Enable the compatibility sysfs nodes. 31 Use 'Y' if your edac utilities aren't ported to work with the newer 32 structures. 33 34config EDAC_DEBUG 35 bool "Debugging" 36 select DEBUG_FS 37 help 38 This turns on debugging information for the entire EDAC subsystem. 39 You do so by inserting edac_module with "edac_debug_level=x." Valid 40 levels are 0-4 (from low to high) and by default it is set to 2. 41 Usually you should select 'N' here. 42 43config EDAC_DECODE_MCE 44 tristate "Decode MCEs in human-readable form (only on AMD for now)" 45 depends on CPU_SUP_AMD && X86_MCE_AMD 46 default y 47 ---help--- 48 Enable this option if you want to decode Machine Check Exceptions 49 occurring on your machine in human-readable form. 50 51 You should definitely say Y here in case you want to decode MCEs 52 which occur really early upon boot, before the module infrastructure 53 has been initialized. 54 55config EDAC_GHES 56 bool "Output ACPI APEI/GHES BIOS detected errors via EDAC" 57 depends on ACPI_APEI_GHES && (EDAC=y) 58 help 59 Not all machines support hardware-driven error report. Some of those 60 provide a BIOS-driven error report mechanism via ACPI, using the 61 APEI/GHES driver. By enabling this option, the error reports provided 62 by GHES are sent to userspace via the EDAC API. 63 64 When this option is enabled, it will disable the hardware-driven 65 mechanisms, if a GHES BIOS is detected, entering into the 66 "Firmware First" mode. 67 68 It should be noticed that keeping both GHES and a hardware-driven 69 error mechanism won't work well, as BIOS will race with OS, while 70 reading the error registers. So, if you want to not use "Firmware 71 first" GHES error mechanism, you should disable GHES either at 72 compilation time or by passing "ghes.disable=1" Kernel parameter 73 at boot time. 74 75 In doubt, say 'Y'. 76 77config EDAC_AMD64 78 tristate "AMD64 (Opteron, Athlon64)" 79 depends on AMD_NB && EDAC_DECODE_MCE 80 help 81 Support for error detection and correction of DRAM ECC errors on 82 the AMD64 families (>= K8) of memory controllers. 83 84config EDAC_AMD64_ERROR_INJECTION 85 bool "Sysfs HW Error injection facilities" 86 depends on EDAC_AMD64 87 help 88 Recent Opterons (Family 10h and later) provide for Memory Error 89 Injection into the ECC detection circuits. The amd64_edac module 90 allows the operator/user to inject Uncorrectable and Correctable 91 errors into DRAM. 92 93 When enabled, in each of the respective memory controller directories 94 (/sys/devices/system/edac/mc/mcX), there are 3 input files: 95 96 - inject_section (0..3, 16-byte section of 64-byte cacheline), 97 - inject_word (0..8, 16-bit word of 16-byte section), 98 - inject_ecc_vector (hex ecc vector: select bits of inject word) 99 100 In addition, there are two control files, inject_read and inject_write, 101 which trigger the DRAM ECC Read and Write respectively. 102 103config EDAC_AMD76X 104 tristate "AMD 76x (760, 762, 768)" 105 depends on PCI && X86_32 106 help 107 Support for error detection and correction on the AMD 76x 108 series of chipsets used with the Athlon processor. 109 110config EDAC_E7XXX 111 tristate "Intel e7xxx (e7205, e7500, e7501, e7505)" 112 depends on PCI && X86_32 113 help 114 Support for error detection and correction on the Intel 115 E7205, E7500, E7501 and E7505 server chipsets. 116 117config EDAC_E752X 118 tristate "Intel e752x (e7520, e7525, e7320) and 3100" 119 depends on PCI && X86 120 help 121 Support for error detection and correction on the Intel 122 E7520, E7525, E7320 server chipsets. 123 124config EDAC_I82443BXGX 125 tristate "Intel 82443BX/GX (440BX/GX)" 126 depends on PCI && X86_32 127 depends on BROKEN 128 help 129 Support for error detection and correction on the Intel 130 82443BX/GX memory controllers (440BX/GX chipsets). 131 132config EDAC_I82875P 133 tristate "Intel 82875p (D82875P, E7210)" 134 depends on PCI && X86_32 135 help 136 Support for error detection and correction on the Intel 137 DP82785P and E7210 server chipsets. 138 139config EDAC_I82975X 140 tristate "Intel 82975x (D82975x)" 141 depends on PCI && X86 142 help 143 Support for error detection and correction on the Intel 144 DP82975x server chipsets. 145 146config EDAC_I3000 147 tristate "Intel 3000/3010" 148 depends on PCI && X86 149 help 150 Support for error detection and correction on the Intel 151 3000 and 3010 server chipsets. 152 153config EDAC_I3200 154 tristate "Intel 3200" 155 depends on PCI && X86 156 help 157 Support for error detection and correction on the Intel 158 3200 and 3210 server chipsets. 159 160config EDAC_IE31200 161 tristate "Intel e312xx" 162 depends on PCI && X86 163 help 164 Support for error detection and correction on the Intel 165 E3-1200 based DRAM controllers. 166 167config EDAC_X38 168 tristate "Intel X38" 169 depends on PCI && X86 170 help 171 Support for error detection and correction on the Intel 172 X38 server chipsets. 173 174config EDAC_I5400 175 tristate "Intel 5400 (Seaburg) chipsets" 176 depends on PCI && X86 177 help 178 Support for error detection and correction the Intel 179 i5400 MCH chipset (Seaburg). 180 181config EDAC_I7CORE 182 tristate "Intel i7 Core (Nehalem) processors" 183 depends on PCI && X86 && X86_MCE_INTEL 184 help 185 Support for error detection and correction the Intel 186 i7 Core (Nehalem) Integrated Memory Controller that exists on 187 newer processors like i7 Core, i7 Core Extreme, Xeon 35xx 188 and Xeon 55xx processors. 189 190config EDAC_I82860 191 tristate "Intel 82860" 192 depends on PCI && X86_32 193 help 194 Support for error detection and correction on the Intel 195 82860 chipset. 196 197config EDAC_R82600 198 tristate "Radisys 82600 embedded chipset" 199 depends on PCI && X86_32 200 help 201 Support for error detection and correction on the Radisys 202 82600 embedded chipset. 203 204config EDAC_I5000 205 tristate "Intel Greencreek/Blackford chipset" 206 depends on X86 && PCI 207 help 208 Support for error detection and correction the Intel 209 Greekcreek/Blackford chipsets. 210 211config EDAC_I5100 212 tristate "Intel San Clemente MCH" 213 depends on X86 && PCI 214 help 215 Support for error detection and correction the Intel 216 San Clemente MCH. 217 218config EDAC_I7300 219 tristate "Intel Clarksboro MCH" 220 depends on X86 && PCI 221 help 222 Support for error detection and correction the Intel 223 Clarksboro MCH (Intel 7300 chipset). 224 225config EDAC_SBRIDGE 226 tristate "Intel Sandy-Bridge/Ivy-Bridge/Haswell Integrated MC" 227 depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG 228 help 229 Support for error detection and correction the Intel 230 Sandy Bridge, Ivy Bridge and Haswell Integrated Memory Controllers. 231 232config EDAC_SKX 233 tristate "Intel Skylake server Integrated MC" 234 depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG 235 depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_SKX can't be y 236 select DMI 237 select ACPI_ADXL if ACPI 238 help 239 Support for error detection and correction the Intel 240 Skylake server Integrated Memory Controllers. If your 241 system has non-volatile DIMMs you should also manually 242 select CONFIG_ACPI_NFIT. 243 244config EDAC_PND2 245 tristate "Intel Pondicherry2" 246 depends on PCI && X86_64 && X86_MCE_INTEL 247 help 248 Support for error detection and correction on the Intel 249 Pondicherry2 Integrated Memory Controller. This SoC IP is 250 first used on the Apollo Lake platform and Denverton 251 micro-server but may appear on others in the future. 252 253config EDAC_MPC85XX 254 tristate "Freescale MPC83xx / MPC85xx" 255 depends on FSL_SOC 256 help 257 Support for error detection and correction on the Freescale 258 MPC8349, MPC8560, MPC8540, MPC8548, T4240 259 260config EDAC_LAYERSCAPE 261 tristate "Freescale Layerscape DDR" 262 depends on ARCH_LAYERSCAPE || SOC_LS1021A 263 help 264 Support for error detection and correction on Freescale memory 265 controllers on Layerscape SoCs. 266 267config EDAC_MV64X60 268 tristate "Marvell MV64x60" 269 depends on MV64X60 270 help 271 Support for error detection and correction on the Marvell 272 MV64360 and MV64460 chipsets. 273 274config EDAC_PASEMI 275 tristate "PA Semi PWRficient" 276 depends on PPC_PASEMI && PCI 277 help 278 Support for error detection and correction on PA Semi 279 PWRficient. 280 281config EDAC_CELL 282 tristate "Cell Broadband Engine memory controller" 283 depends on PPC_CELL_COMMON 284 help 285 Support for error detection and correction on the 286 Cell Broadband Engine internal memory controller 287 on platform without a hypervisor 288 289config EDAC_PPC4XX 290 tristate "PPC4xx IBM DDR2 Memory Controller" 291 depends on 4xx 292 help 293 This enables support for EDAC on the ECC memory used 294 with the IBM DDR2 memory controller found in various 295 PowerPC 4xx embedded processors such as the 405EX[r], 296 440SP, 440SPe, 460EX, 460GT and 460SX. 297 298config EDAC_AMD8131 299 tristate "AMD8131 HyperTransport PCI-X Tunnel" 300 depends on PCI && PPC_MAPLE 301 help 302 Support for error detection and correction on the 303 AMD8131 HyperTransport PCI-X Tunnel chip. 304 Note, add more Kconfig dependency if it's adopted 305 on some machine other than Maple. 306 307config EDAC_AMD8111 308 tristate "AMD8111 HyperTransport I/O Hub" 309 depends on PCI && PPC_MAPLE 310 help 311 Support for error detection and correction on the 312 AMD8111 HyperTransport I/O Hub chip. 313 Note, add more Kconfig dependency if it's adopted 314 on some machine other than Maple. 315 316config EDAC_CPC925 317 tristate "IBM CPC925 Memory Controller (PPC970FX)" 318 depends on PPC64 319 help 320 Support for error detection and correction on the 321 IBM CPC925 Bridge and Memory Controller, which is 322 a companion chip to the PowerPC 970 family of 323 processors. 324 325config EDAC_HIGHBANK_MC 326 tristate "Highbank Memory Controller" 327 depends on ARCH_HIGHBANK 328 help 329 Support for error detection and correction on the 330 Calxeda Highbank memory controller. 331 332config EDAC_HIGHBANK_L2 333 tristate "Highbank L2 Cache" 334 depends on ARCH_HIGHBANK 335 help 336 Support for error detection and correction on the 337 Calxeda Highbank memory controller. 338 339config EDAC_OCTEON_PC 340 tristate "Cavium Octeon Primary Caches" 341 depends on CPU_CAVIUM_OCTEON 342 help 343 Support for error detection and correction on the primary caches of 344 the cnMIPS cores of Cavium Octeon family SOCs. 345 346config EDAC_OCTEON_L2C 347 tristate "Cavium Octeon Secondary Caches (L2C)" 348 depends on CAVIUM_OCTEON_SOC 349 help 350 Support for error detection and correction on the 351 Cavium Octeon family of SOCs. 352 353config EDAC_OCTEON_LMC 354 tristate "Cavium Octeon DRAM Memory Controller (LMC)" 355 depends on CAVIUM_OCTEON_SOC 356 help 357 Support for error detection and correction on the 358 Cavium Octeon family of SOCs. 359 360config EDAC_OCTEON_PCI 361 tristate "Cavium Octeon PCI Controller" 362 depends on PCI && CAVIUM_OCTEON_SOC 363 help 364 Support for error detection and correction on the 365 Cavium Octeon family of SOCs. 366 367config EDAC_THUNDERX 368 tristate "Cavium ThunderX EDAC" 369 depends on ARM64 370 depends on PCI 371 help 372 Support for error detection and correction on the 373 Cavium ThunderX memory controllers (LMC), Cache 374 Coherent Processor Interconnect (CCPI) and L2 cache 375 blocks (TAD, CBC, MCI). 376 377config EDAC_ALTERA 378 bool "Altera SOCFPGA ECC" 379 depends on EDAC=y && (ARCH_SOCFPGA || ARCH_STRATIX10) 380 help 381 Support for error detection and correction on the 382 Altera SOCs. This must be selected for SDRAM ECC. 383 Note that the preloader must initialize the SDRAM 384 before loading the kernel. 385 386config EDAC_ALTERA_L2C 387 bool "Altera L2 Cache ECC" 388 depends on EDAC_ALTERA=y && CACHE_L2X0 389 help 390 Support for error detection and correction on the 391 Altera L2 cache Memory for Altera SoCs. This option 392 requires L2 cache. 393 394config EDAC_ALTERA_OCRAM 395 bool "Altera On-Chip RAM ECC" 396 depends on EDAC_ALTERA=y && SRAM && GENERIC_ALLOCATOR 397 help 398 Support for error detection and correction on the 399 Altera On-Chip RAM Memory for Altera SoCs. 400 401config EDAC_ALTERA_ETHERNET 402 bool "Altera Ethernet FIFO ECC" 403 depends on EDAC_ALTERA=y 404 help 405 Support for error detection and correction on the 406 Altera Ethernet FIFO Memory for Altera SoCs. 407 408config EDAC_ALTERA_NAND 409 bool "Altera NAND FIFO ECC" 410 depends on EDAC_ALTERA=y && MTD_NAND_DENALI 411 help 412 Support for error detection and correction on the 413 Altera NAND FIFO Memory for Altera SoCs. 414 415config EDAC_ALTERA_DMA 416 bool "Altera DMA FIFO ECC" 417 depends on EDAC_ALTERA=y && PL330_DMA=y 418 help 419 Support for error detection and correction on the 420 Altera DMA FIFO Memory for Altera SoCs. 421 422config EDAC_ALTERA_USB 423 bool "Altera USB FIFO ECC" 424 depends on EDAC_ALTERA=y && USB_DWC2 425 help 426 Support for error detection and correction on the 427 Altera USB FIFO Memory for Altera SoCs. 428 429config EDAC_ALTERA_QSPI 430 bool "Altera QSPI FIFO ECC" 431 depends on EDAC_ALTERA=y && SPI_CADENCE_QUADSPI 432 help 433 Support for error detection and correction on the 434 Altera QSPI FIFO Memory for Altera SoCs. 435 436config EDAC_ALTERA_SDMMC 437 bool "Altera SDMMC FIFO ECC" 438 depends on EDAC_ALTERA=y && MMC_DW 439 help 440 Support for error detection and correction on the 441 Altera SDMMC FIFO Memory for Altera SoCs. 442 443config EDAC_SYNOPSYS 444 tristate "Synopsys DDR Memory Controller" 445 depends on ARCH_ZYNQ 446 help 447 Support for error detection and correction on the Synopsys DDR 448 memory controller. 449 450config EDAC_XGENE 451 tristate "APM X-Gene SoC" 452 depends on (ARM64 || COMPILE_TEST) 453 help 454 Support for error detection and correction on the 455 APM X-Gene family of SOCs. 456 457config EDAC_TI 458 tristate "Texas Instruments DDR3 ECC Controller" 459 depends on ARCH_KEYSTONE || SOC_DRA7XX 460 help 461 Support for error detection and correction on the 462 TI SoCs. 463 464config EDAC_QCOM 465 tristate "QCOM EDAC Controller" 466 depends on ARCH_QCOM && QCOM_LLCC 467 help 468 Support for error detection and correction on the 469 Qualcomm Technologies, Inc. SoCs. 470 471 This driver reports Single Bit Errors (SBEs) and Double Bit Errors (DBEs). 472 As of now, it supports error reporting for Last Level Cache Controller (LLCC) 473 of Tag RAM and Data RAM. 474 475 For debugging issues having to do with stability and overall system 476 health, you should probably say 'Y' here. 477 478endif # EDAC 479