xref: /openbmc/linux/drivers/edac/Kconfig (revision a2cce7a9)
1#
2#	EDAC Kconfig
3#	Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com
4#	Licensed and distributed under the GPL
5
6config EDAC_ATOMIC_SCRUB
7	bool
8
9config EDAC_SUPPORT
10	bool
11
12menuconfig EDAC
13	bool "EDAC (Error Detection And Correction) reporting"
14	depends on HAS_IOMEM && EDAC_SUPPORT
15	help
16	  EDAC is designed to report errors in the core system.
17	  These are low-level errors that are reported in the CPU or
18	  supporting chipset or other subsystems:
19	  memory errors, cache errors, PCI errors, thermal throttling, etc..
20	  If unsure, select 'Y'.
21
22	  If this code is reporting problems on your system, please
23	  see the EDAC project web pages for more information at:
24
25	  <http://bluesmoke.sourceforge.net/>
26
27	  and:
28
29	  <http://buttersideup.com/edacwiki>
30
31	  There is also a mailing list for the EDAC project, which can
32	  be found via the sourceforge page.
33
34if EDAC
35
36config EDAC_LEGACY_SYSFS
37	bool "EDAC legacy sysfs"
38	default y
39	help
40	  Enable the compatibility sysfs nodes.
41	  Use 'Y' if your edac utilities aren't ported to work with the newer
42	  structures.
43
44config EDAC_DEBUG
45	bool "Debugging"
46	help
47	  This turns on debugging information for the entire EDAC subsystem.
48	  You do so by inserting edac_module with "edac_debug_level=x." Valid
49	  levels are 0-4 (from low to high) and by default it is set to 2.
50	  Usually you should select 'N' here.
51
52config EDAC_DECODE_MCE
53	tristate "Decode MCEs in human-readable form (only on AMD for now)"
54	depends on CPU_SUP_AMD && X86_MCE_AMD
55	default y
56	---help---
57	  Enable this option if you want to decode Machine Check Exceptions
58	  occurring on your machine in human-readable form.
59
60	  You should definitely say Y here in case you want to decode MCEs
61	  which occur really early upon boot, before the module infrastructure
62	  has been initialized.
63
64config EDAC_MM_EDAC
65	tristate "Main Memory EDAC (Error Detection And Correction) reporting"
66	select RAS
67	help
68	  Some systems are able to detect and correct errors in main
69	  memory.  EDAC can report statistics on memory error
70	  detection and correction (EDAC - or commonly referred to ECC
71	  errors).  EDAC will also try to decode where these errors
72	  occurred so that a particular failing memory module can be
73	  replaced.  If unsure, select 'Y'.
74
75config EDAC_GHES
76	bool "Output ACPI APEI/GHES BIOS detected errors via EDAC"
77	depends on ACPI_APEI_GHES && (EDAC_MM_EDAC=y)
78	default y
79	help
80	  Not all machines support hardware-driven error report. Some of those
81	  provide a BIOS-driven error report mechanism via ACPI, using the
82	  APEI/GHES driver. By enabling this option, the error reports provided
83	  by GHES are sent to userspace via the EDAC API.
84
85	  When this option is enabled, it will disable the hardware-driven
86	  mechanisms, if a GHES BIOS is detected, entering into the
87	  "Firmware First" mode.
88
89	  It should be noticed that keeping both GHES and a hardware-driven
90	  error mechanism won't work well, as BIOS will race with OS, while
91	  reading the error registers. So, if you want to not use "Firmware
92	  first" GHES error mechanism, you should disable GHES either at
93	  compilation time or by passing "ghes.disable=1" Kernel parameter
94	  at boot time.
95
96	  In doubt, say 'Y'.
97
98config EDAC_AMD64
99	tristate "AMD64 (Opteron, Athlon64)"
100	depends on EDAC_MM_EDAC && AMD_NB && EDAC_DECODE_MCE
101	help
102	  Support for error detection and correction of DRAM ECC errors on
103	  the AMD64 families (>= K8) of memory controllers.
104
105config EDAC_AMD64_ERROR_INJECTION
106	bool "Sysfs HW Error injection facilities"
107	depends on EDAC_AMD64
108	help
109	  Recent Opterons (Family 10h and later) provide for Memory Error
110	  Injection into the ECC detection circuits. The amd64_edac module
111	  allows the operator/user to inject Uncorrectable and Correctable
112	  errors into DRAM.
113
114	  When enabled, in each of the respective memory controller directories
115	  (/sys/devices/system/edac/mc/mcX), there are 3 input files:
116
117	  - inject_section (0..3, 16-byte section of 64-byte cacheline),
118	  - inject_word (0..8, 16-bit word of 16-byte section),
119	  - inject_ecc_vector (hex ecc vector: select bits of inject word)
120
121	  In addition, there are two control files, inject_read and inject_write,
122	  which trigger the DRAM ECC Read and Write respectively.
123
124config EDAC_AMD76X
125	tristate "AMD 76x (760, 762, 768)"
126	depends on EDAC_MM_EDAC && PCI && X86_32
127	help
128	  Support for error detection and correction on the AMD 76x
129	  series of chipsets used with the Athlon processor.
130
131config EDAC_E7XXX
132	tristate "Intel e7xxx (e7205, e7500, e7501, e7505)"
133	depends on EDAC_MM_EDAC && PCI && X86_32
134	help
135	  Support for error detection and correction on the Intel
136	  E7205, E7500, E7501 and E7505 server chipsets.
137
138config EDAC_E752X
139	tristate "Intel e752x (e7520, e7525, e7320) and 3100"
140	depends on EDAC_MM_EDAC && PCI && X86
141	help
142	  Support for error detection and correction on the Intel
143	  E7520, E7525, E7320 server chipsets.
144
145config EDAC_I82443BXGX
146	tristate "Intel 82443BX/GX (440BX/GX)"
147	depends on EDAC_MM_EDAC && PCI && X86_32
148	depends on BROKEN
149	help
150	  Support for error detection and correction on the Intel
151	  82443BX/GX memory controllers (440BX/GX chipsets).
152
153config EDAC_I82875P
154	tristate "Intel 82875p (D82875P, E7210)"
155	depends on EDAC_MM_EDAC && PCI && X86_32
156	help
157	  Support for error detection and correction on the Intel
158	  DP82785P and E7210 server chipsets.
159
160config EDAC_I82975X
161	tristate "Intel 82975x (D82975x)"
162	depends on EDAC_MM_EDAC && PCI && X86
163	help
164	  Support for error detection and correction on the Intel
165	  DP82975x server chipsets.
166
167config EDAC_I3000
168	tristate "Intel 3000/3010"
169	depends on EDAC_MM_EDAC && PCI && X86
170	help
171	  Support for error detection and correction on the Intel
172	  3000 and 3010 server chipsets.
173
174config EDAC_I3200
175	tristate "Intel 3200"
176	depends on EDAC_MM_EDAC && PCI && X86
177	help
178	  Support for error detection and correction on the Intel
179	  3200 and 3210 server chipsets.
180
181config EDAC_IE31200
182	tristate "Intel e312xx"
183	depends on EDAC_MM_EDAC && PCI && X86
184	help
185	  Support for error detection and correction on the Intel
186	  E3-1200 based DRAM controllers.
187
188config EDAC_X38
189	tristate "Intel X38"
190	depends on EDAC_MM_EDAC && PCI && X86
191	help
192	  Support for error detection and correction on the Intel
193	  X38 server chipsets.
194
195config EDAC_I5400
196	tristate "Intel 5400 (Seaburg) chipsets"
197	depends on EDAC_MM_EDAC && PCI && X86
198	help
199	  Support for error detection and correction the Intel
200	  i5400 MCH chipset (Seaburg).
201
202config EDAC_I7CORE
203	tristate "Intel i7 Core (Nehalem) processors"
204	depends on EDAC_MM_EDAC && PCI && X86 && X86_MCE_INTEL
205	help
206	  Support for error detection and correction the Intel
207	  i7 Core (Nehalem) Integrated Memory Controller that exists on
208	  newer processors like i7 Core, i7 Core Extreme, Xeon 35xx
209	  and Xeon 55xx processors.
210
211config EDAC_I82860
212	tristate "Intel 82860"
213	depends on EDAC_MM_EDAC && PCI && X86_32
214	help
215	  Support for error detection and correction on the Intel
216	  82860 chipset.
217
218config EDAC_R82600
219	tristate "Radisys 82600 embedded chipset"
220	depends on EDAC_MM_EDAC && PCI && X86_32
221	help
222	  Support for error detection and correction on the Radisys
223	  82600 embedded chipset.
224
225config EDAC_I5000
226	tristate "Intel Greencreek/Blackford chipset"
227	depends on EDAC_MM_EDAC && X86 && PCI
228	help
229	  Support for error detection and correction the Intel
230	  Greekcreek/Blackford chipsets.
231
232config EDAC_I5100
233	tristate "Intel San Clemente MCH"
234	depends on EDAC_MM_EDAC && X86 && PCI
235	help
236	  Support for error detection and correction the Intel
237	  San Clemente MCH.
238
239config EDAC_I7300
240	tristate "Intel Clarksboro MCH"
241	depends on EDAC_MM_EDAC && X86 && PCI
242	help
243	  Support for error detection and correction the Intel
244	  Clarksboro MCH (Intel 7300 chipset).
245
246config EDAC_SBRIDGE
247	tristate "Intel Sandy-Bridge/Ivy-Bridge/Haswell Integrated MC"
248	depends on EDAC_MM_EDAC && PCI && X86_64 && X86_MCE_INTEL
249	depends on PCI_MMCONFIG
250	help
251	  Support for error detection and correction the Intel
252	  Sandy Bridge, Ivy Bridge and Haswell Integrated Memory Controllers.
253
254config EDAC_MPC85XX
255	tristate "Freescale MPC83xx / MPC85xx"
256	depends on EDAC_MM_EDAC && FSL_SOC
257	help
258	  Support for error detection and correction on the Freescale
259	  MPC8349, MPC8560, MPC8540, MPC8548, T4240
260
261config EDAC_MV64X60
262	tristate "Marvell MV64x60"
263	depends on EDAC_MM_EDAC && MV64X60
264	help
265	  Support for error detection and correction on the Marvell
266	  MV64360 and MV64460 chipsets.
267
268config EDAC_PASEMI
269	tristate "PA Semi PWRficient"
270	depends on EDAC_MM_EDAC && PCI
271	depends on PPC_PASEMI
272	help
273	  Support for error detection and correction on PA Semi
274	  PWRficient.
275
276config EDAC_CELL
277	tristate "Cell Broadband Engine memory controller"
278	depends on EDAC_MM_EDAC && PPC_CELL_COMMON
279	help
280	  Support for error detection and correction on the
281	  Cell Broadband Engine internal memory controller
282	  on platform without a hypervisor
283
284config EDAC_PPC4XX
285	tristate "PPC4xx IBM DDR2 Memory Controller"
286	depends on EDAC_MM_EDAC && 4xx
287	help
288	  This enables support for EDAC on the ECC memory used
289	  with the IBM DDR2 memory controller found in various
290	  PowerPC 4xx embedded processors such as the 405EX[r],
291	  440SP, 440SPe, 460EX, 460GT and 460SX.
292
293config EDAC_AMD8131
294	tristate "AMD8131 HyperTransport PCI-X Tunnel"
295	depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
296	help
297	  Support for error detection and correction on the
298	  AMD8131 HyperTransport PCI-X Tunnel chip.
299	  Note, add more Kconfig dependency if it's adopted
300	  on some machine other than Maple.
301
302config EDAC_AMD8111
303	tristate "AMD8111 HyperTransport I/O Hub"
304	depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
305	help
306	  Support for error detection and correction on the
307	  AMD8111 HyperTransport I/O Hub chip.
308	  Note, add more Kconfig dependency if it's adopted
309	  on some machine other than Maple.
310
311config EDAC_CPC925
312	tristate "IBM CPC925 Memory Controller (PPC970FX)"
313	depends on EDAC_MM_EDAC && PPC64
314	help
315	  Support for error detection and correction on the
316	  IBM CPC925 Bridge and Memory Controller, which is
317	  a companion chip to the PowerPC 970 family of
318	  processors.
319
320config EDAC_TILE
321	tristate "Tilera Memory Controller"
322	depends on EDAC_MM_EDAC && TILE
323	default y
324	help
325	  Support for error detection and correction on the
326	  Tilera memory controller.
327
328config EDAC_HIGHBANK_MC
329	tristate "Highbank Memory Controller"
330	depends on EDAC_MM_EDAC && ARCH_HIGHBANK
331	help
332	  Support for error detection and correction on the
333	  Calxeda Highbank memory controller.
334
335config EDAC_HIGHBANK_L2
336	tristate "Highbank L2 Cache"
337	depends on EDAC_MM_EDAC && ARCH_HIGHBANK
338	help
339	  Support for error detection and correction on the
340	  Calxeda Highbank memory controller.
341
342config EDAC_OCTEON_PC
343	tristate "Cavium Octeon Primary Caches"
344	depends on EDAC_MM_EDAC && CPU_CAVIUM_OCTEON
345	help
346	  Support for error detection and correction on the primary caches of
347	  the cnMIPS cores of Cavium Octeon family SOCs.
348
349config EDAC_OCTEON_L2C
350	tristate "Cavium Octeon Secondary Caches (L2C)"
351	depends on EDAC_MM_EDAC && CAVIUM_OCTEON_SOC
352	help
353	  Support for error detection and correction on the
354	  Cavium Octeon family of SOCs.
355
356config EDAC_OCTEON_LMC
357	tristate "Cavium Octeon DRAM Memory Controller (LMC)"
358	depends on EDAC_MM_EDAC && CAVIUM_OCTEON_SOC
359	help
360	  Support for error detection and correction on the
361	  Cavium Octeon family of SOCs.
362
363config EDAC_OCTEON_PCI
364	tristate "Cavium Octeon PCI Controller"
365	depends on EDAC_MM_EDAC && PCI && CAVIUM_OCTEON_SOC
366	help
367	  Support for error detection and correction on the
368	  Cavium Octeon family of SOCs.
369
370config EDAC_ALTERA_MC
371	bool "Altera SDRAM Memory Controller EDAC"
372	depends on EDAC_MM_EDAC=y && ARCH_SOCFPGA
373	help
374	  Support for error detection and correction on the
375	  Altera SDRAM memory controller. Note that the
376	  preloader must initialize the SDRAM before loading
377	  the kernel.
378
379config EDAC_SYNOPSYS
380	tristate "Synopsys DDR Memory Controller"
381	depends on EDAC_MM_EDAC && ARCH_ZYNQ
382	help
383	  Support for error detection and correction on the Synopsys DDR
384	  memory controller.
385
386config EDAC_XGENE
387	tristate "APM X-Gene SoC"
388	depends on EDAC_MM_EDAC && (ARM64 || COMPILE_TEST)
389	help
390	  Support for error detection and correction on the
391	  APM X-Gene family of SOCs.
392
393endif # EDAC
394