1# 2# EDAC Kconfig 3# Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com 4# Licensed and distributed under the GPL 5 6config EDAC_ATOMIC_SCRUB 7 bool 8 9config EDAC_SUPPORT 10 bool 11 12menuconfig EDAC 13 tristate "EDAC (Error Detection And Correction) reporting" 14 depends on HAS_IOMEM && EDAC_SUPPORT && RAS 15 help 16 EDAC is a subsystem along with hardware-specific drivers designed to 17 report hardware errors. These are low-level errors that are reported 18 in the CPU or supporting chipset or other subsystems: 19 memory errors, cache errors, PCI errors, thermal throttling, etc.. 20 If unsure, select 'Y'. 21 22 The mailing list for the EDAC project is linux-edac@vger.kernel.org. 23 24if EDAC 25 26config EDAC_LEGACY_SYSFS 27 bool "EDAC legacy sysfs" 28 default y 29 help 30 Enable the compatibility sysfs nodes. 31 Use 'Y' if your edac utilities aren't ported to work with the newer 32 structures. 33 34config EDAC_DEBUG 35 bool "Debugging" 36 select DEBUG_FS 37 help 38 This turns on debugging information for the entire EDAC subsystem. 39 You do so by inserting edac_module with "edac_debug_level=x." Valid 40 levels are 0-4 (from low to high) and by default it is set to 2. 41 Usually you should select 'N' here. 42 43config EDAC_DECODE_MCE 44 tristate "Decode MCEs in human-readable form (only on AMD for now)" 45 depends on CPU_SUP_AMD && X86_MCE_AMD 46 default y 47 ---help--- 48 Enable this option if you want to decode Machine Check Exceptions 49 occurring on your machine in human-readable form. 50 51 You should definitely say Y here in case you want to decode MCEs 52 which occur really early upon boot, before the module infrastructure 53 has been initialized. 54 55config EDAC_GHES 56 bool "Output ACPI APEI/GHES BIOS detected errors via EDAC" 57 depends on ACPI_APEI_GHES && (EDAC=y) 58 help 59 Not all machines support hardware-driven error report. Some of those 60 provide a BIOS-driven error report mechanism via ACPI, using the 61 APEI/GHES driver. By enabling this option, the error reports provided 62 by GHES are sent to userspace via the EDAC API. 63 64 When this option is enabled, it will disable the hardware-driven 65 mechanisms, if a GHES BIOS is detected, entering into the 66 "Firmware First" mode. 67 68 It should be noticed that keeping both GHES and a hardware-driven 69 error mechanism won't work well, as BIOS will race with OS, while 70 reading the error registers. So, if you want to not use "Firmware 71 first" GHES error mechanism, you should disable GHES either at 72 compilation time or by passing "ghes.disable=1" Kernel parameter 73 at boot time. 74 75 In doubt, say 'Y'. 76 77config EDAC_AMD64 78 tristate "AMD64 (Opteron, Athlon64)" 79 depends on AMD_NB && EDAC_DECODE_MCE 80 help 81 Support for error detection and correction of DRAM ECC errors on 82 the AMD64 families (>= K8) of memory controllers. 83 84config EDAC_AMD64_ERROR_INJECTION 85 bool "Sysfs HW Error injection facilities" 86 depends on EDAC_AMD64 87 help 88 Recent Opterons (Family 10h and later) provide for Memory Error 89 Injection into the ECC detection circuits. The amd64_edac module 90 allows the operator/user to inject Uncorrectable and Correctable 91 errors into DRAM. 92 93 When enabled, in each of the respective memory controller directories 94 (/sys/devices/system/edac/mc/mcX), there are 3 input files: 95 96 - inject_section (0..3, 16-byte section of 64-byte cacheline), 97 - inject_word (0..8, 16-bit word of 16-byte section), 98 - inject_ecc_vector (hex ecc vector: select bits of inject word) 99 100 In addition, there are two control files, inject_read and inject_write, 101 which trigger the DRAM ECC Read and Write respectively. 102 103config EDAC_AMD76X 104 tristate "AMD 76x (760, 762, 768)" 105 depends on PCI && X86_32 106 help 107 Support for error detection and correction on the AMD 76x 108 series of chipsets used with the Athlon processor. 109 110config EDAC_E7XXX 111 tristate "Intel e7xxx (e7205, e7500, e7501, e7505)" 112 depends on PCI && X86_32 113 help 114 Support for error detection and correction on the Intel 115 E7205, E7500, E7501 and E7505 server chipsets. 116 117config EDAC_E752X 118 tristate "Intel e752x (e7520, e7525, e7320) and 3100" 119 depends on PCI && X86 120 help 121 Support for error detection and correction on the Intel 122 E7520, E7525, E7320 server chipsets. 123 124config EDAC_I82443BXGX 125 tristate "Intel 82443BX/GX (440BX/GX)" 126 depends on PCI && X86_32 127 depends on BROKEN 128 help 129 Support for error detection and correction on the Intel 130 82443BX/GX memory controllers (440BX/GX chipsets). 131 132config EDAC_I82875P 133 tristate "Intel 82875p (D82875P, E7210)" 134 depends on PCI && X86_32 135 help 136 Support for error detection and correction on the Intel 137 DP82785P and E7210 server chipsets. 138 139config EDAC_I82975X 140 tristate "Intel 82975x (D82975x)" 141 depends on PCI && X86 142 help 143 Support for error detection and correction on the Intel 144 DP82975x server chipsets. 145 146config EDAC_I3000 147 tristate "Intel 3000/3010" 148 depends on PCI && X86 149 help 150 Support for error detection and correction on the Intel 151 3000 and 3010 server chipsets. 152 153config EDAC_I3200 154 tristate "Intel 3200" 155 depends on PCI && X86 156 help 157 Support for error detection and correction on the Intel 158 3200 and 3210 server chipsets. 159 160config EDAC_IE31200 161 tristate "Intel e312xx" 162 depends on PCI && X86 163 help 164 Support for error detection and correction on the Intel 165 E3-1200 based DRAM controllers. 166 167config EDAC_X38 168 tristate "Intel X38" 169 depends on PCI && X86 170 help 171 Support for error detection and correction on the Intel 172 X38 server chipsets. 173 174config EDAC_I5400 175 tristate "Intel 5400 (Seaburg) chipsets" 176 depends on PCI && X86 177 help 178 Support for error detection and correction the Intel 179 i5400 MCH chipset (Seaburg). 180 181config EDAC_I7CORE 182 tristate "Intel i7 Core (Nehalem) processors" 183 depends on PCI && X86 && X86_MCE_INTEL 184 help 185 Support for error detection and correction the Intel 186 i7 Core (Nehalem) Integrated Memory Controller that exists on 187 newer processors like i7 Core, i7 Core Extreme, Xeon 35xx 188 and Xeon 55xx processors. 189 190config EDAC_I82860 191 tristate "Intel 82860" 192 depends on PCI && X86_32 193 help 194 Support for error detection and correction on the Intel 195 82860 chipset. 196 197config EDAC_R82600 198 tristate "Radisys 82600 embedded chipset" 199 depends on PCI && X86_32 200 help 201 Support for error detection and correction on the Radisys 202 82600 embedded chipset. 203 204config EDAC_I5000 205 tristate "Intel Greencreek/Blackford chipset" 206 depends on X86 && PCI 207 help 208 Support for error detection and correction the Intel 209 Greekcreek/Blackford chipsets. 210 211config EDAC_I5100 212 tristate "Intel San Clemente MCH" 213 depends on X86 && PCI 214 help 215 Support for error detection and correction the Intel 216 San Clemente MCH. 217 218config EDAC_I7300 219 tristate "Intel Clarksboro MCH" 220 depends on X86 && PCI 221 help 222 Support for error detection and correction the Intel 223 Clarksboro MCH (Intel 7300 chipset). 224 225config EDAC_SBRIDGE 226 tristate "Intel Sandy-Bridge/Ivy-Bridge/Haswell Integrated MC" 227 depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG 228 help 229 Support for error detection and correction the Intel 230 Sandy Bridge, Ivy Bridge and Haswell Integrated Memory Controllers. 231 232config EDAC_SKX 233 tristate "Intel Skylake server Integrated MC" 234 depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI 235 depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_SKX can't be y 236 select DMI 237 select ACPI_ADXL 238 help 239 Support for error detection and correction the Intel 240 Skylake server Integrated Memory Controllers. If your 241 system has non-volatile DIMMs you should also manually 242 select CONFIG_ACPI_NFIT. 243 244config EDAC_I10NM 245 tristate "Intel 10nm server Integrated MC" 246 depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI 247 depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_I10NM can't be y 248 select DMI 249 select ACPI_ADXL 250 help 251 Support for error detection and correction the Intel 252 10nm server Integrated Memory Controllers. If your 253 system has non-volatile DIMMs you should also manually 254 select CONFIG_ACPI_NFIT. 255 256config EDAC_PND2 257 tristate "Intel Pondicherry2" 258 depends on PCI && X86_64 && X86_MCE_INTEL 259 help 260 Support for error detection and correction on the Intel 261 Pondicherry2 Integrated Memory Controller. This SoC IP is 262 first used on the Apollo Lake platform and Denverton 263 micro-server but may appear on others in the future. 264 265config EDAC_MPC85XX 266 bool "Freescale MPC83xx / MPC85xx" 267 depends on FSL_SOC && EDAC=y 268 help 269 Support for error detection and correction on the Freescale 270 MPC8349, MPC8560, MPC8540, MPC8548, T4240 271 272config EDAC_LAYERSCAPE 273 tristate "Freescale Layerscape DDR" 274 depends on ARCH_LAYERSCAPE || SOC_LS1021A 275 help 276 Support for error detection and correction on Freescale memory 277 controllers on Layerscape SoCs. 278 279config EDAC_MV64X60 280 tristate "Marvell MV64x60" 281 depends on MV64X60 282 help 283 Support for error detection and correction on the Marvell 284 MV64360 and MV64460 chipsets. 285 286config EDAC_PASEMI 287 tristate "PA Semi PWRficient" 288 depends on PPC_PASEMI && PCI 289 help 290 Support for error detection and correction on PA Semi 291 PWRficient. 292 293config EDAC_CELL 294 tristate "Cell Broadband Engine memory controller" 295 depends on PPC_CELL_COMMON 296 help 297 Support for error detection and correction on the 298 Cell Broadband Engine internal memory controller 299 on platform without a hypervisor 300 301config EDAC_PPC4XX 302 tristate "PPC4xx IBM DDR2 Memory Controller" 303 depends on 4xx 304 help 305 This enables support for EDAC on the ECC memory used 306 with the IBM DDR2 memory controller found in various 307 PowerPC 4xx embedded processors such as the 405EX[r], 308 440SP, 440SPe, 460EX, 460GT and 460SX. 309 310config EDAC_AMD8131 311 tristate "AMD8131 HyperTransport PCI-X Tunnel" 312 depends on PCI && PPC_MAPLE 313 help 314 Support for error detection and correction on the 315 AMD8131 HyperTransport PCI-X Tunnel chip. 316 Note, add more Kconfig dependency if it's adopted 317 on some machine other than Maple. 318 319config EDAC_AMD8111 320 tristate "AMD8111 HyperTransport I/O Hub" 321 depends on PCI && PPC_MAPLE 322 help 323 Support for error detection and correction on the 324 AMD8111 HyperTransport I/O Hub chip. 325 Note, add more Kconfig dependency if it's adopted 326 on some machine other than Maple. 327 328config EDAC_CPC925 329 tristate "IBM CPC925 Memory Controller (PPC970FX)" 330 depends on PPC64 331 help 332 Support for error detection and correction on the 333 IBM CPC925 Bridge and Memory Controller, which is 334 a companion chip to the PowerPC 970 family of 335 processors. 336 337config EDAC_HIGHBANK_MC 338 tristate "Highbank Memory Controller" 339 depends on ARCH_HIGHBANK 340 help 341 Support for error detection and correction on the 342 Calxeda Highbank memory controller. 343 344config EDAC_HIGHBANK_L2 345 tristate "Highbank L2 Cache" 346 depends on ARCH_HIGHBANK 347 help 348 Support for error detection and correction on the 349 Calxeda Highbank memory controller. 350 351config EDAC_OCTEON_PC 352 tristate "Cavium Octeon Primary Caches" 353 depends on CPU_CAVIUM_OCTEON 354 help 355 Support for error detection and correction on the primary caches of 356 the cnMIPS cores of Cavium Octeon family SOCs. 357 358config EDAC_OCTEON_L2C 359 tristate "Cavium Octeon Secondary Caches (L2C)" 360 depends on CAVIUM_OCTEON_SOC 361 help 362 Support for error detection and correction on the 363 Cavium Octeon family of SOCs. 364 365config EDAC_OCTEON_LMC 366 tristate "Cavium Octeon DRAM Memory Controller (LMC)" 367 depends on CAVIUM_OCTEON_SOC 368 help 369 Support for error detection and correction on the 370 Cavium Octeon family of SOCs. 371 372config EDAC_OCTEON_PCI 373 tristate "Cavium Octeon PCI Controller" 374 depends on PCI && CAVIUM_OCTEON_SOC 375 help 376 Support for error detection and correction on the 377 Cavium Octeon family of SOCs. 378 379config EDAC_THUNDERX 380 tristate "Cavium ThunderX EDAC" 381 depends on ARM64 382 depends on PCI 383 help 384 Support for error detection and correction on the 385 Cavium ThunderX memory controllers (LMC), Cache 386 Coherent Processor Interconnect (CCPI) and L2 cache 387 blocks (TAD, CBC, MCI). 388 389config EDAC_ALTERA 390 bool "Altera SOCFPGA ECC" 391 depends on EDAC=y && (ARCH_SOCFPGA || ARCH_STRATIX10) 392 help 393 Support for error detection and correction on the 394 Altera SOCs. This is the global enable for the 395 various Altera peripherals. 396 397config EDAC_ALTERA_SDRAM 398 bool "Altera SDRAM ECC" 399 depends on EDAC_ALTERA=y 400 help 401 Support for error detection and correction on the 402 Altera SDRAM Memory for Altera SoCs. Note that the 403 preloader must initialize the SDRAM before loading 404 the kernel. 405 406config EDAC_ALTERA_L2C 407 bool "Altera L2 Cache ECC" 408 depends on EDAC_ALTERA=y && CACHE_L2X0 409 help 410 Support for error detection and correction on the 411 Altera L2 cache Memory for Altera SoCs. This option 412 requires L2 cache. 413 414config EDAC_ALTERA_OCRAM 415 bool "Altera On-Chip RAM ECC" 416 depends on EDAC_ALTERA=y && SRAM && GENERIC_ALLOCATOR 417 help 418 Support for error detection and correction on the 419 Altera On-Chip RAM Memory for Altera SoCs. 420 421config EDAC_ALTERA_ETHERNET 422 bool "Altera Ethernet FIFO ECC" 423 depends on EDAC_ALTERA=y 424 help 425 Support for error detection and correction on the 426 Altera Ethernet FIFO Memory for Altera SoCs. 427 428config EDAC_ALTERA_NAND 429 bool "Altera NAND FIFO ECC" 430 depends on EDAC_ALTERA=y && MTD_NAND_DENALI 431 help 432 Support for error detection and correction on the 433 Altera NAND FIFO Memory for Altera SoCs. 434 435config EDAC_ALTERA_DMA 436 bool "Altera DMA FIFO ECC" 437 depends on EDAC_ALTERA=y && PL330_DMA=y 438 help 439 Support for error detection and correction on the 440 Altera DMA FIFO Memory for Altera SoCs. 441 442config EDAC_ALTERA_USB 443 bool "Altera USB FIFO ECC" 444 depends on EDAC_ALTERA=y && USB_DWC2 445 help 446 Support for error detection and correction on the 447 Altera USB FIFO Memory for Altera SoCs. 448 449config EDAC_ALTERA_QSPI 450 bool "Altera QSPI FIFO ECC" 451 depends on EDAC_ALTERA=y && SPI_CADENCE_QUADSPI 452 help 453 Support for error detection and correction on the 454 Altera QSPI FIFO Memory for Altera SoCs. 455 456config EDAC_ALTERA_SDMMC 457 bool "Altera SDMMC FIFO ECC" 458 depends on EDAC_ALTERA=y && MMC_DW 459 help 460 Support for error detection and correction on the 461 Altera SDMMC FIFO Memory for Altera SoCs. 462 463config EDAC_SYNOPSYS 464 tristate "Synopsys DDR Memory Controller" 465 depends on ARCH_ZYNQ || ARCH_ZYNQMP 466 help 467 Support for error detection and correction on the Synopsys DDR 468 memory controller. 469 470config EDAC_XGENE 471 tristate "APM X-Gene SoC" 472 depends on (ARM64 || COMPILE_TEST) 473 help 474 Support for error detection and correction on the 475 APM X-Gene family of SOCs. 476 477config EDAC_TI 478 tristate "Texas Instruments DDR3 ECC Controller" 479 depends on ARCH_KEYSTONE || SOC_DRA7XX 480 help 481 Support for error detection and correction on the 482 TI SoCs. 483 484config EDAC_QCOM 485 tristate "QCOM EDAC Controller" 486 depends on ARCH_QCOM && QCOM_LLCC 487 help 488 Support for error detection and correction on the 489 Qualcomm Technologies, Inc. SoCs. 490 491 This driver reports Single Bit Errors (SBEs) and Double Bit Errors (DBEs). 492 As of now, it supports error reporting for Last Level Cache Controller (LLCC) 493 of Tag RAM and Data RAM. 494 495 For debugging issues having to do with stability and overall system 496 health, you should probably say 'Y' here. 497 498config EDAC_ASPEED 499 tristate "Aspeed AST 2500 SoC" 500 depends on MACH_ASPEED_G5 501 help 502 Support for error detection and correction on the Aspeed AST 2500 SoC. 503 504 First, ECC must be configured in the bootloader. Then, this driver 505 will expose error counters via the EDAC kernel framework. 506 507endif # EDAC 508