1# 2# EDAC Kconfig 3# Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com 4# Licensed and distributed under the GPL 5 6config EDAC_ATOMIC_SCRUB 7 bool 8 9config EDAC_SUPPORT 10 bool 11 12menuconfig EDAC 13 tristate "EDAC (Error Detection And Correction) reporting" 14 depends on HAS_IOMEM && EDAC_SUPPORT && RAS 15 help 16 EDAC is a subsystem along with hardware-specific drivers designed to 17 report hardware errors. These are low-level errors that are reported 18 in the CPU or supporting chipset or other subsystems: 19 memory errors, cache errors, PCI errors, thermal throttling, etc.. 20 If unsure, select 'Y'. 21 22 The mailing list for the EDAC project is linux-edac@vger.kernel.org. 23 24if EDAC 25 26config EDAC_LEGACY_SYSFS 27 bool "EDAC legacy sysfs" 28 default y 29 help 30 Enable the compatibility sysfs nodes. 31 Use 'Y' if your edac utilities aren't ported to work with the newer 32 structures. 33 34config EDAC_DEBUG 35 bool "Debugging" 36 select DEBUG_FS 37 help 38 This turns on debugging information for the entire EDAC subsystem. 39 You do so by inserting edac_module with "edac_debug_level=x." Valid 40 levels are 0-4 (from low to high) and by default it is set to 2. 41 Usually you should select 'N' here. 42 43config EDAC_DECODE_MCE 44 tristate "Decode MCEs in human-readable form (only on AMD for now)" 45 depends on CPU_SUP_AMD && X86_MCE_AMD 46 default y 47 help 48 Enable this option if you want to decode Machine Check Exceptions 49 occurring on your machine in human-readable form. 50 51 You should definitely say Y here in case you want to decode MCEs 52 which occur really early upon boot, before the module infrastructure 53 has been initialized. 54 55config EDAC_GHES 56 bool "Output ACPI APEI/GHES BIOS detected errors via EDAC" 57 depends on ACPI_APEI_GHES && (EDAC=y) 58 help 59 Not all machines support hardware-driven error report. Some of those 60 provide a BIOS-driven error report mechanism via ACPI, using the 61 APEI/GHES driver. By enabling this option, the error reports provided 62 by GHES are sent to userspace via the EDAC API. 63 64 When this option is enabled, it will disable the hardware-driven 65 mechanisms, if a GHES BIOS is detected, entering into the 66 "Firmware First" mode. 67 68 It should be noticed that keeping both GHES and a hardware-driven 69 error mechanism won't work well, as BIOS will race with OS, while 70 reading the error registers. So, if you want to not use "Firmware 71 first" GHES error mechanism, you should disable GHES either at 72 compilation time or by passing "ghes.disable=1" Kernel parameter 73 at boot time. 74 75 In doubt, say 'Y'. 76 77config EDAC_AMD64 78 tristate "AMD64 (Opteron, Athlon64)" 79 depends on AMD_NB && EDAC_DECODE_MCE 80 help 81 Support for error detection and correction of DRAM ECC errors on 82 the AMD64 families (>= K8) of memory controllers. 83 84 When EDAC_DEBUG is enabled, hardware error injection facilities 85 through sysfs are available: 86 87 AMD CPUs up to and excluding family 0x17 provide for Memory 88 Error Injection into the ECC detection circuits. The amd64_edac 89 module allows the operator/user to inject Uncorrectable and 90 Correctable errors into DRAM. 91 92 When enabled, in each of the respective memory controller directories 93 (/sys/devices/system/edac/mc/mcX), there are 3 input files: 94 95 - inject_section (0..3, 16-byte section of 64-byte cacheline), 96 - inject_word (0..8, 16-bit word of 16-byte section), 97 - inject_ecc_vector (hex ecc vector: select bits of inject word) 98 99 In addition, there are two control files, inject_read and inject_write, 100 which trigger the DRAM ECC Read and Write respectively. 101 102config EDAC_AL_MC 103 tristate "Amazon's Annapurna Lab Memory Controller" 104 depends on (ARCH_ALPINE || COMPILE_TEST) 105 help 106 Support for error detection and correction for Amazon's Annapurna 107 Labs Alpine chips which allow 1 bit correction and 2 bits detection. 108 109config EDAC_AMD76X 110 tristate "AMD 76x (760, 762, 768)" 111 depends on PCI && X86_32 112 help 113 Support for error detection and correction on the AMD 76x 114 series of chipsets used with the Athlon processor. 115 116config EDAC_E7XXX 117 tristate "Intel e7xxx (e7205, e7500, e7501, e7505)" 118 depends on PCI && X86_32 119 help 120 Support for error detection and correction on the Intel 121 E7205, E7500, E7501 and E7505 server chipsets. 122 123config EDAC_E752X 124 tristate "Intel e752x (e7520, e7525, e7320) and 3100" 125 depends on PCI && X86 126 help 127 Support for error detection and correction on the Intel 128 E7520, E7525, E7320 server chipsets. 129 130config EDAC_I82443BXGX 131 tristate "Intel 82443BX/GX (440BX/GX)" 132 depends on PCI && X86_32 133 depends on BROKEN 134 help 135 Support for error detection and correction on the Intel 136 82443BX/GX memory controllers (440BX/GX chipsets). 137 138config EDAC_I82875P 139 tristate "Intel 82875p (D82875P, E7210)" 140 depends on PCI && X86_32 141 help 142 Support for error detection and correction on the Intel 143 DP82785P and E7210 server chipsets. 144 145config EDAC_I82975X 146 tristate "Intel 82975x (D82975x)" 147 depends on PCI && X86 148 help 149 Support for error detection and correction on the Intel 150 DP82975x server chipsets. 151 152config EDAC_I3000 153 tristate "Intel 3000/3010" 154 depends on PCI && X86 155 help 156 Support for error detection and correction on the Intel 157 3000 and 3010 server chipsets. 158 159config EDAC_I3200 160 tristate "Intel 3200" 161 depends on PCI && X86 162 help 163 Support for error detection and correction on the Intel 164 3200 and 3210 server chipsets. 165 166config EDAC_IE31200 167 tristate "Intel e312xx" 168 depends on PCI && X86 169 help 170 Support for error detection and correction on the Intel 171 E3-1200 based DRAM controllers. 172 173config EDAC_X38 174 tristate "Intel X38" 175 depends on PCI && X86 176 help 177 Support for error detection and correction on the Intel 178 X38 server chipsets. 179 180config EDAC_I5400 181 tristate "Intel 5400 (Seaburg) chipsets" 182 depends on PCI && X86 183 help 184 Support for error detection and correction the Intel 185 i5400 MCH chipset (Seaburg). 186 187config EDAC_I7CORE 188 tristate "Intel i7 Core (Nehalem) processors" 189 depends on PCI && X86 && X86_MCE_INTEL 190 help 191 Support for error detection and correction the Intel 192 i7 Core (Nehalem) Integrated Memory Controller that exists on 193 newer processors like i7 Core, i7 Core Extreme, Xeon 35xx 194 and Xeon 55xx processors. 195 196config EDAC_I82860 197 tristate "Intel 82860" 198 depends on PCI && X86_32 199 help 200 Support for error detection and correction on the Intel 201 82860 chipset. 202 203config EDAC_R82600 204 tristate "Radisys 82600 embedded chipset" 205 depends on PCI && X86_32 206 help 207 Support for error detection and correction on the Radisys 208 82600 embedded chipset. 209 210config EDAC_I5000 211 tristate "Intel Greencreek/Blackford chipset" 212 depends on X86 && PCI 213 help 214 Support for error detection and correction the Intel 215 Greekcreek/Blackford chipsets. 216 217config EDAC_I5100 218 tristate "Intel San Clemente MCH" 219 depends on X86 && PCI 220 help 221 Support for error detection and correction the Intel 222 San Clemente MCH. 223 224config EDAC_I7300 225 tristate "Intel Clarksboro MCH" 226 depends on X86 && PCI 227 help 228 Support for error detection and correction the Intel 229 Clarksboro MCH (Intel 7300 chipset). 230 231config EDAC_SBRIDGE 232 tristate "Intel Sandy-Bridge/Ivy-Bridge/Haswell Integrated MC" 233 depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG 234 help 235 Support for error detection and correction the Intel 236 Sandy Bridge, Ivy Bridge and Haswell Integrated Memory Controllers. 237 238config EDAC_SKX 239 tristate "Intel Skylake server Integrated MC" 240 depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI 241 depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_SKX can't be y 242 select DMI 243 select ACPI_ADXL 244 help 245 Support for error detection and correction the Intel 246 Skylake server Integrated Memory Controllers. If your 247 system has non-volatile DIMMs you should also manually 248 select CONFIG_ACPI_NFIT. 249 250config EDAC_I10NM 251 tristate "Intel 10nm server Integrated MC" 252 depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI 253 depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_I10NM can't be y 254 select DMI 255 select ACPI_ADXL 256 help 257 Support for error detection and correction the Intel 258 10nm server Integrated Memory Controllers. If your 259 system has non-volatile DIMMs you should also manually 260 select CONFIG_ACPI_NFIT. 261 262config EDAC_PND2 263 tristate "Intel Pondicherry2" 264 depends on PCI && X86_64 && X86_MCE_INTEL 265 help 266 Support for error detection and correction on the Intel 267 Pondicherry2 Integrated Memory Controller. This SoC IP is 268 first used on the Apollo Lake platform and Denverton 269 micro-server but may appear on others in the future. 270 271config EDAC_IGEN6 272 tristate "Intel client SoC Integrated MC" 273 depends on PCI && PCI_MMCONFIG && ARCH_HAVE_NMI_SAFE_CMPXCHG 274 depends on X64_64 && X86_MCE_INTEL 275 help 276 Support for error detection and correction on the Intel 277 client SoC Integrated Memory Controller using In-Band ECC IP. 278 This In-Band ECC is first used on the Elkhart Lake SoC but 279 may appear on others in the future. 280 281config EDAC_MPC85XX 282 bool "Freescale MPC83xx / MPC85xx" 283 depends on FSL_SOC && EDAC=y 284 help 285 Support for error detection and correction on the Freescale 286 MPC8349, MPC8560, MPC8540, MPC8548, T4240 287 288config EDAC_LAYERSCAPE 289 tristate "Freescale Layerscape DDR" 290 depends on ARCH_LAYERSCAPE || SOC_LS1021A 291 help 292 Support for error detection and correction on Freescale memory 293 controllers on Layerscape SoCs. 294 295config EDAC_PASEMI 296 tristate "PA Semi PWRficient" 297 depends on PPC_PASEMI && PCI 298 help 299 Support for error detection and correction on PA Semi 300 PWRficient. 301 302config EDAC_CELL 303 tristate "Cell Broadband Engine memory controller" 304 depends on PPC_CELL_COMMON 305 help 306 Support for error detection and correction on the 307 Cell Broadband Engine internal memory controller 308 on platform without a hypervisor 309 310config EDAC_PPC4XX 311 tristate "PPC4xx IBM DDR2 Memory Controller" 312 depends on 4xx 313 help 314 This enables support for EDAC on the ECC memory used 315 with the IBM DDR2 memory controller found in various 316 PowerPC 4xx embedded processors such as the 405EX[r], 317 440SP, 440SPe, 460EX, 460GT and 460SX. 318 319config EDAC_AMD8131 320 tristate "AMD8131 HyperTransport PCI-X Tunnel" 321 depends on PCI && PPC_MAPLE 322 help 323 Support for error detection and correction on the 324 AMD8131 HyperTransport PCI-X Tunnel chip. 325 Note, add more Kconfig dependency if it's adopted 326 on some machine other than Maple. 327 328config EDAC_AMD8111 329 tristate "AMD8111 HyperTransport I/O Hub" 330 depends on PCI && PPC_MAPLE 331 help 332 Support for error detection and correction on the 333 AMD8111 HyperTransport I/O Hub chip. 334 Note, add more Kconfig dependency if it's adopted 335 on some machine other than Maple. 336 337config EDAC_CPC925 338 tristate "IBM CPC925 Memory Controller (PPC970FX)" 339 depends on PPC64 340 help 341 Support for error detection and correction on the 342 IBM CPC925 Bridge and Memory Controller, which is 343 a companion chip to the PowerPC 970 family of 344 processors. 345 346config EDAC_HIGHBANK_MC 347 tristate "Highbank Memory Controller" 348 depends on ARCH_HIGHBANK 349 help 350 Support for error detection and correction on the 351 Calxeda Highbank memory controller. 352 353config EDAC_HIGHBANK_L2 354 tristate "Highbank L2 Cache" 355 depends on ARCH_HIGHBANK 356 help 357 Support for error detection and correction on the 358 Calxeda Highbank memory controller. 359 360config EDAC_OCTEON_PC 361 tristate "Cavium Octeon Primary Caches" 362 depends on CPU_CAVIUM_OCTEON 363 help 364 Support for error detection and correction on the primary caches of 365 the cnMIPS cores of Cavium Octeon family SOCs. 366 367config EDAC_OCTEON_L2C 368 tristate "Cavium Octeon Secondary Caches (L2C)" 369 depends on CAVIUM_OCTEON_SOC 370 help 371 Support for error detection and correction on the 372 Cavium Octeon family of SOCs. 373 374config EDAC_OCTEON_LMC 375 tristate "Cavium Octeon DRAM Memory Controller (LMC)" 376 depends on CAVIUM_OCTEON_SOC 377 help 378 Support for error detection and correction on the 379 Cavium Octeon family of SOCs. 380 381config EDAC_OCTEON_PCI 382 tristate "Cavium Octeon PCI Controller" 383 depends on PCI && CAVIUM_OCTEON_SOC 384 help 385 Support for error detection and correction on the 386 Cavium Octeon family of SOCs. 387 388config EDAC_THUNDERX 389 tristate "Cavium ThunderX EDAC" 390 depends on ARM64 391 depends on PCI 392 help 393 Support for error detection and correction on the 394 Cavium ThunderX memory controllers (LMC), Cache 395 Coherent Processor Interconnect (CCPI) and L2 cache 396 blocks (TAD, CBC, MCI). 397 398config EDAC_ALTERA 399 bool "Altera SOCFPGA ECC" 400 depends on EDAC=y && ARCH_INTEL_SOCFPGA 401 help 402 Support for error detection and correction on the 403 Altera SOCs. This is the global enable for the 404 various Altera peripherals. 405 406config EDAC_ALTERA_SDRAM 407 bool "Altera SDRAM ECC" 408 depends on EDAC_ALTERA=y 409 help 410 Support for error detection and correction on the 411 Altera SDRAM Memory for Altera SoCs. Note that the 412 preloader must initialize the SDRAM before loading 413 the kernel. 414 415config EDAC_ALTERA_L2C 416 bool "Altera L2 Cache ECC" 417 depends on EDAC_ALTERA=y && CACHE_L2X0 418 help 419 Support for error detection and correction on the 420 Altera L2 cache Memory for Altera SoCs. This option 421 requires L2 cache. 422 423config EDAC_ALTERA_OCRAM 424 bool "Altera On-Chip RAM ECC" 425 depends on EDAC_ALTERA=y && SRAM && GENERIC_ALLOCATOR 426 help 427 Support for error detection and correction on the 428 Altera On-Chip RAM Memory for Altera SoCs. 429 430config EDAC_ALTERA_ETHERNET 431 bool "Altera Ethernet FIFO ECC" 432 depends on EDAC_ALTERA=y 433 help 434 Support for error detection and correction on the 435 Altera Ethernet FIFO Memory for Altera SoCs. 436 437config EDAC_ALTERA_NAND 438 bool "Altera NAND FIFO ECC" 439 depends on EDAC_ALTERA=y && MTD_NAND_DENALI 440 help 441 Support for error detection and correction on the 442 Altera NAND FIFO Memory for Altera SoCs. 443 444config EDAC_ALTERA_DMA 445 bool "Altera DMA FIFO ECC" 446 depends on EDAC_ALTERA=y && PL330_DMA=y 447 help 448 Support for error detection and correction on the 449 Altera DMA FIFO Memory for Altera SoCs. 450 451config EDAC_ALTERA_USB 452 bool "Altera USB FIFO ECC" 453 depends on EDAC_ALTERA=y && USB_DWC2 454 help 455 Support for error detection and correction on the 456 Altera USB FIFO Memory for Altera SoCs. 457 458config EDAC_ALTERA_QSPI 459 bool "Altera QSPI FIFO ECC" 460 depends on EDAC_ALTERA=y && SPI_CADENCE_QUADSPI 461 help 462 Support for error detection and correction on the 463 Altera QSPI FIFO Memory for Altera SoCs. 464 465config EDAC_ALTERA_SDMMC 466 bool "Altera SDMMC FIFO ECC" 467 depends on EDAC_ALTERA=y && MMC_DW 468 help 469 Support for error detection and correction on the 470 Altera SDMMC FIFO Memory for Altera SoCs. 471 472config EDAC_SIFIVE 473 bool "Sifive platform EDAC driver" 474 depends on EDAC=y && SIFIVE_L2 475 help 476 Support for error detection and correction on the SiFive SoCs. 477 478config EDAC_ARMADA_XP 479 bool "Marvell Armada XP DDR and L2 Cache ECC" 480 depends on MACH_MVEBU_V7 481 help 482 Support for error correction and detection on the Marvell Aramada XP 483 DDR RAM and L2 cache controllers. 484 485config EDAC_SYNOPSYS 486 tristate "Synopsys DDR Memory Controller" 487 depends on ARCH_ZYNQ || ARCH_ZYNQMP 488 help 489 Support for error detection and correction on the Synopsys DDR 490 memory controller. 491 492config EDAC_XGENE 493 tristate "APM X-Gene SoC" 494 depends on (ARM64 || COMPILE_TEST) 495 help 496 Support for error detection and correction on the 497 APM X-Gene family of SOCs. 498 499config EDAC_TI 500 tristate "Texas Instruments DDR3 ECC Controller" 501 depends on ARCH_KEYSTONE || SOC_DRA7XX 502 help 503 Support for error detection and correction on the TI SoCs. 504 505config EDAC_QCOM 506 tristate "QCOM EDAC Controller" 507 depends on ARCH_QCOM && QCOM_LLCC 508 help 509 Support for error detection and correction on the 510 Qualcomm Technologies, Inc. SoCs. 511 512 This driver reports Single Bit Errors (SBEs) and Double Bit Errors (DBEs). 513 As of now, it supports error reporting for Last Level Cache Controller (LLCC) 514 of Tag RAM and Data RAM. 515 516 For debugging issues having to do with stability and overall system 517 health, you should probably say 'Y' here. 518 519config EDAC_ASPEED 520 tristate "Aspeed AST BMC SoC" 521 depends on ARCH_ASPEED 522 help 523 Support for error detection and correction on the Aspeed AST BMC SoC. 524 525 First, ECC must be configured in the bootloader. Then, this driver 526 will expose error counters via the EDAC kernel framework. 527 528config EDAC_BLUEFIELD 529 tristate "Mellanox BlueField Memory ECC" 530 depends on ARM64 && ((MELLANOX_PLATFORM && ACPI) || COMPILE_TEST) 531 help 532 Support for error detection and correction on the 533 Mellanox BlueField SoCs. 534 535config EDAC_DMC520 536 tristate "ARM DMC-520 ECC" 537 depends on ARM64 538 help 539 Support for error detection and correction on the 540 SoCs with ARM DMC-520 DRAM controller. 541 542endif # EDAC 543