1# 2# EDAC Kconfig 3# Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com 4# Licensed and distributed under the GPL 5 6config EDAC_ATOMIC_SCRUB 7 bool 8 9config EDAC_SUPPORT 10 bool 11 12menuconfig EDAC 13 tristate "EDAC (Error Detection And Correction) reporting" 14 depends on HAS_IOMEM && EDAC_SUPPORT && RAS 15 help 16 EDAC is a subsystem along with hardware-specific drivers designed to 17 report hardware errors. These are low-level errors that are reported 18 in the CPU or supporting chipset or other subsystems: 19 memory errors, cache errors, PCI errors, thermal throttling, etc.. 20 If unsure, select 'Y'. 21 22 The mailing list for the EDAC project is linux-edac@vger.kernel.org. 23 24if EDAC 25 26config EDAC_LEGACY_SYSFS 27 bool "EDAC legacy sysfs" 28 default y 29 help 30 Enable the compatibility sysfs nodes. 31 Use 'Y' if your edac utilities aren't ported to work with the newer 32 structures. 33 34config EDAC_DEBUG 35 bool "Debugging" 36 select DEBUG_FS 37 help 38 This turns on debugging information for the entire EDAC subsystem. 39 You do so by inserting edac_module with "edac_debug_level=x." Valid 40 levels are 0-4 (from low to high) and by default it is set to 2. 41 Usually you should select 'N' here. 42 43config EDAC_DECODE_MCE 44 tristate "Decode MCEs in human-readable form (only on AMD for now)" 45 depends on CPU_SUP_AMD && X86_MCE_AMD 46 default y 47 help 48 Enable this option if you want to decode Machine Check Exceptions 49 occurring on your machine in human-readable form. 50 51 You should definitely say Y here in case you want to decode MCEs 52 which occur really early upon boot, before the module infrastructure 53 has been initialized. 54 55config EDAC_GHES 56 bool "Output ACPI APEI/GHES BIOS detected errors via EDAC" 57 depends on ACPI_APEI_GHES && (EDAC=y) 58 help 59 Not all machines support hardware-driven error report. Some of those 60 provide a BIOS-driven error report mechanism via ACPI, using the 61 APEI/GHES driver. By enabling this option, the error reports provided 62 by GHES are sent to userspace via the EDAC API. 63 64 When this option is enabled, it will disable the hardware-driven 65 mechanisms, if a GHES BIOS is detected, entering into the 66 "Firmware First" mode. 67 68 It should be noticed that keeping both GHES and a hardware-driven 69 error mechanism won't work well, as BIOS will race with OS, while 70 reading the error registers. So, if you want to not use "Firmware 71 first" GHES error mechanism, you should disable GHES either at 72 compilation time or by passing "ghes.disable=1" Kernel parameter 73 at boot time. 74 75 In doubt, say 'Y'. 76 77config EDAC_AMD64 78 tristate "AMD64 (Opteron, Athlon64)" 79 depends on AMD_NB && EDAC_DECODE_MCE 80 help 81 Support for error detection and correction of DRAM ECC errors on 82 the AMD64 families (>= K8) of memory controllers. 83 84 When EDAC_DEBUG is enabled, hardware error injection facilities 85 through sysfs are available: 86 87 AMD CPUs up to and excluding family 0x17 provide for Memory 88 Error Injection into the ECC detection circuits. The amd64_edac 89 module allows the operator/user to inject Uncorrectable and 90 Correctable errors into DRAM. 91 92 When enabled, in each of the respective memory controller directories 93 (/sys/devices/system/edac/mc/mcX), there are 3 input files: 94 95 - inject_section (0..3, 16-byte section of 64-byte cacheline), 96 - inject_word (0..8, 16-bit word of 16-byte section), 97 - inject_ecc_vector (hex ecc vector: select bits of inject word) 98 99 In addition, there are two control files, inject_read and inject_write, 100 which trigger the DRAM ECC Read and Write respectively. 101 102config EDAC_AL_MC 103 tristate "Amazon's Annapurna Lab Memory Controller" 104 depends on (ARCH_ALPINE || COMPILE_TEST) 105 help 106 Support for error detection and correction for Amazon's Annapurna 107 Labs Alpine chips which allow 1 bit correction and 2 bits detection. 108 109config EDAC_AMD76X 110 tristate "AMD 76x (760, 762, 768)" 111 depends on PCI && X86_32 112 help 113 Support for error detection and correction on the AMD 76x 114 series of chipsets used with the Athlon processor. 115 116config EDAC_E7XXX 117 tristate "Intel e7xxx (e7205, e7500, e7501, e7505)" 118 depends on PCI && X86_32 119 help 120 Support for error detection and correction on the Intel 121 E7205, E7500, E7501 and E7505 server chipsets. 122 123config EDAC_E752X 124 tristate "Intel e752x (e7520, e7525, e7320) and 3100" 125 depends on PCI && X86 126 help 127 Support for error detection and correction on the Intel 128 E7520, E7525, E7320 server chipsets. 129 130config EDAC_I82443BXGX 131 tristate "Intel 82443BX/GX (440BX/GX)" 132 depends on PCI && X86_32 133 depends on BROKEN 134 help 135 Support for error detection and correction on the Intel 136 82443BX/GX memory controllers (440BX/GX chipsets). 137 138config EDAC_I82875P 139 tristate "Intel 82875p (D82875P, E7210)" 140 depends on PCI && X86_32 141 help 142 Support for error detection and correction on the Intel 143 DP82785P and E7210 server chipsets. 144 145config EDAC_I82975X 146 tristate "Intel 82975x (D82975x)" 147 depends on PCI && X86 148 help 149 Support for error detection and correction on the Intel 150 DP82975x server chipsets. 151 152config EDAC_I3000 153 tristate "Intel 3000/3010" 154 depends on PCI && X86 155 help 156 Support for error detection and correction on the Intel 157 3000 and 3010 server chipsets. 158 159config EDAC_I3200 160 tristate "Intel 3200" 161 depends on PCI && X86 162 help 163 Support for error detection and correction on the Intel 164 3200 and 3210 server chipsets. 165 166config EDAC_IE31200 167 tristate "Intel e312xx" 168 depends on PCI && X86 169 help 170 Support for error detection and correction on the Intel 171 E3-1200 based DRAM controllers. 172 173config EDAC_X38 174 tristate "Intel X38" 175 depends on PCI && X86 176 help 177 Support for error detection and correction on the Intel 178 X38 server chipsets. 179 180config EDAC_I5400 181 tristate "Intel 5400 (Seaburg) chipsets" 182 depends on PCI && X86 183 help 184 Support for error detection and correction the Intel 185 i5400 MCH chipset (Seaburg). 186 187config EDAC_I7CORE 188 tristate "Intel i7 Core (Nehalem) processors" 189 depends on PCI && X86 && X86_MCE_INTEL 190 help 191 Support for error detection and correction the Intel 192 i7 Core (Nehalem) Integrated Memory Controller that exists on 193 newer processors like i7 Core, i7 Core Extreme, Xeon 35xx 194 and Xeon 55xx processors. 195 196config EDAC_I82860 197 tristate "Intel 82860" 198 depends on PCI && X86_32 199 help 200 Support for error detection and correction on the Intel 201 82860 chipset. 202 203config EDAC_R82600 204 tristate "Radisys 82600 embedded chipset" 205 depends on PCI && X86_32 206 help 207 Support for error detection and correction on the Radisys 208 82600 embedded chipset. 209 210config EDAC_I5000 211 tristate "Intel Greencreek/Blackford chipset" 212 depends on X86 && PCI 213 help 214 Support for error detection and correction the Intel 215 Greekcreek/Blackford chipsets. 216 217config EDAC_I5100 218 tristate "Intel San Clemente MCH" 219 depends on X86 && PCI 220 help 221 Support for error detection and correction the Intel 222 San Clemente MCH. 223 224config EDAC_I7300 225 tristate "Intel Clarksboro MCH" 226 depends on X86 && PCI 227 help 228 Support for error detection and correction the Intel 229 Clarksboro MCH (Intel 7300 chipset). 230 231config EDAC_SBRIDGE 232 tristate "Intel Sandy-Bridge/Ivy-Bridge/Haswell Integrated MC" 233 depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG 234 help 235 Support for error detection and correction the Intel 236 Sandy Bridge, Ivy Bridge and Haswell Integrated Memory Controllers. 237 238config EDAC_SKX 239 tristate "Intel Skylake server Integrated MC" 240 depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI 241 depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_SKX can't be y 242 select DMI 243 select ACPI_ADXL 244 help 245 Support for error detection and correction the Intel 246 Skylake server Integrated Memory Controllers. If your 247 system has non-volatile DIMMs you should also manually 248 select CONFIG_ACPI_NFIT. 249 250config EDAC_I10NM 251 tristate "Intel 10nm server Integrated MC" 252 depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI 253 depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_I10NM can't be y 254 select DMI 255 select ACPI_ADXL 256 help 257 Support for error detection and correction the Intel 258 10nm server Integrated Memory Controllers. If your 259 system has non-volatile DIMMs you should also manually 260 select CONFIG_ACPI_NFIT. 261 262config EDAC_PND2 263 tristate "Intel Pondicherry2" 264 depends on PCI && X86_64 && X86_MCE_INTEL 265 help 266 Support for error detection and correction on the Intel 267 Pondicherry2 Integrated Memory Controller. This SoC IP is 268 first used on the Apollo Lake platform and Denverton 269 micro-server but may appear on others in the future. 270 271config EDAC_IGEN6 272 tristate "Intel client SoC Integrated MC" 273 depends on PCI && X86_64 && PCI_MMCONFIG && ARCH_HAVE_NMI_SAFE_CMPXCHG 274 help 275 Support for error detection and correction on the Intel 276 client SoC Integrated Memory Controller using In-Band ECC IP. 277 This In-Band ECC is first used on the Elkhart Lake SoC but 278 may appear on others in the future. 279 280config EDAC_MPC85XX 281 bool "Freescale MPC83xx / MPC85xx" 282 depends on FSL_SOC && EDAC=y 283 help 284 Support for error detection and correction on the Freescale 285 MPC8349, MPC8560, MPC8540, MPC8548, T4240 286 287config EDAC_LAYERSCAPE 288 tristate "Freescale Layerscape DDR" 289 depends on ARCH_LAYERSCAPE || SOC_LS1021A 290 help 291 Support for error detection and correction on Freescale memory 292 controllers on Layerscape SoCs. 293 294config EDAC_PASEMI 295 tristate "PA Semi PWRficient" 296 depends on PPC_PASEMI && PCI 297 help 298 Support for error detection and correction on PA Semi 299 PWRficient. 300 301config EDAC_CELL 302 tristate "Cell Broadband Engine memory controller" 303 depends on PPC_CELL_COMMON 304 help 305 Support for error detection and correction on the 306 Cell Broadband Engine internal memory controller 307 on platform without a hypervisor 308 309config EDAC_PPC4XX 310 tristate "PPC4xx IBM DDR2 Memory Controller" 311 depends on 4xx 312 help 313 This enables support for EDAC on the ECC memory used 314 with the IBM DDR2 memory controller found in various 315 PowerPC 4xx embedded processors such as the 405EX[r], 316 440SP, 440SPe, 460EX, 460GT and 460SX. 317 318config EDAC_AMD8131 319 tristate "AMD8131 HyperTransport PCI-X Tunnel" 320 depends on PCI && PPC_MAPLE 321 help 322 Support for error detection and correction on the 323 AMD8131 HyperTransport PCI-X Tunnel chip. 324 Note, add more Kconfig dependency if it's adopted 325 on some machine other than Maple. 326 327config EDAC_AMD8111 328 tristate "AMD8111 HyperTransport I/O Hub" 329 depends on PCI && PPC_MAPLE 330 help 331 Support for error detection and correction on the 332 AMD8111 HyperTransport I/O Hub chip. 333 Note, add more Kconfig dependency if it's adopted 334 on some machine other than Maple. 335 336config EDAC_CPC925 337 tristate "IBM CPC925 Memory Controller (PPC970FX)" 338 depends on PPC64 339 help 340 Support for error detection and correction on the 341 IBM CPC925 Bridge and Memory Controller, which is 342 a companion chip to the PowerPC 970 family of 343 processors. 344 345config EDAC_HIGHBANK_MC 346 tristate "Highbank Memory Controller" 347 depends on ARCH_HIGHBANK 348 help 349 Support for error detection and correction on the 350 Calxeda Highbank memory controller. 351 352config EDAC_HIGHBANK_L2 353 tristate "Highbank L2 Cache" 354 depends on ARCH_HIGHBANK 355 help 356 Support for error detection and correction on the 357 Calxeda Highbank memory controller. 358 359config EDAC_OCTEON_PC 360 tristate "Cavium Octeon Primary Caches" 361 depends on CPU_CAVIUM_OCTEON 362 help 363 Support for error detection and correction on the primary caches of 364 the cnMIPS cores of Cavium Octeon family SOCs. 365 366config EDAC_OCTEON_L2C 367 tristate "Cavium Octeon Secondary Caches (L2C)" 368 depends on CAVIUM_OCTEON_SOC 369 help 370 Support for error detection and correction on the 371 Cavium Octeon family of SOCs. 372 373config EDAC_OCTEON_LMC 374 tristate "Cavium Octeon DRAM Memory Controller (LMC)" 375 depends on CAVIUM_OCTEON_SOC 376 help 377 Support for error detection and correction on the 378 Cavium Octeon family of SOCs. 379 380config EDAC_OCTEON_PCI 381 tristate "Cavium Octeon PCI Controller" 382 depends on PCI && CAVIUM_OCTEON_SOC 383 help 384 Support for error detection and correction on the 385 Cavium Octeon family of SOCs. 386 387config EDAC_THUNDERX 388 tristate "Cavium ThunderX EDAC" 389 depends on ARM64 390 depends on PCI 391 help 392 Support for error detection and correction on the 393 Cavium ThunderX memory controllers (LMC), Cache 394 Coherent Processor Interconnect (CCPI) and L2 cache 395 blocks (TAD, CBC, MCI). 396 397config EDAC_ALTERA 398 bool "Altera SOCFPGA ECC" 399 depends on EDAC=y && ARCH_INTEL_SOCFPGA 400 help 401 Support for error detection and correction on the 402 Altera SOCs. This is the global enable for the 403 various Altera peripherals. 404 405config EDAC_ALTERA_SDRAM 406 bool "Altera SDRAM ECC" 407 depends on EDAC_ALTERA=y 408 help 409 Support for error detection and correction on the 410 Altera SDRAM Memory for Altera SoCs. Note that the 411 preloader must initialize the SDRAM before loading 412 the kernel. 413 414config EDAC_ALTERA_L2C 415 bool "Altera L2 Cache ECC" 416 depends on EDAC_ALTERA=y && CACHE_L2X0 417 help 418 Support for error detection and correction on the 419 Altera L2 cache Memory for Altera SoCs. This option 420 requires L2 cache. 421 422config EDAC_ALTERA_OCRAM 423 bool "Altera On-Chip RAM ECC" 424 depends on EDAC_ALTERA=y && SRAM && GENERIC_ALLOCATOR 425 help 426 Support for error detection and correction on the 427 Altera On-Chip RAM Memory for Altera SoCs. 428 429config EDAC_ALTERA_ETHERNET 430 bool "Altera Ethernet FIFO ECC" 431 depends on EDAC_ALTERA=y 432 help 433 Support for error detection and correction on the 434 Altera Ethernet FIFO Memory for Altera SoCs. 435 436config EDAC_ALTERA_NAND 437 bool "Altera NAND FIFO ECC" 438 depends on EDAC_ALTERA=y && MTD_NAND_DENALI 439 help 440 Support for error detection and correction on the 441 Altera NAND FIFO Memory for Altera SoCs. 442 443config EDAC_ALTERA_DMA 444 bool "Altera DMA FIFO ECC" 445 depends on EDAC_ALTERA=y && PL330_DMA=y 446 help 447 Support for error detection and correction on the 448 Altera DMA FIFO Memory for Altera SoCs. 449 450config EDAC_ALTERA_USB 451 bool "Altera USB FIFO ECC" 452 depends on EDAC_ALTERA=y && USB_DWC2 453 help 454 Support for error detection and correction on the 455 Altera USB FIFO Memory for Altera SoCs. 456 457config EDAC_ALTERA_QSPI 458 bool "Altera QSPI FIFO ECC" 459 depends on EDAC_ALTERA=y && SPI_CADENCE_QUADSPI 460 help 461 Support for error detection and correction on the 462 Altera QSPI FIFO Memory for Altera SoCs. 463 464config EDAC_ALTERA_SDMMC 465 bool "Altera SDMMC FIFO ECC" 466 depends on EDAC_ALTERA=y && MMC_DW 467 help 468 Support for error detection and correction on the 469 Altera SDMMC FIFO Memory for Altera SoCs. 470 471config EDAC_SIFIVE 472 bool "Sifive platform EDAC driver" 473 depends on EDAC=y && SIFIVE_L2 474 help 475 Support for error detection and correction on the SiFive SoCs. 476 477config EDAC_ARMADA_XP 478 bool "Marvell Armada XP DDR and L2 Cache ECC" 479 depends on MACH_MVEBU_V7 480 help 481 Support for error correction and detection on the Marvell Aramada XP 482 DDR RAM and L2 cache controllers. 483 484config EDAC_SYNOPSYS 485 tristate "Synopsys DDR Memory Controller" 486 depends on ARCH_ZYNQ || ARCH_ZYNQMP 487 help 488 Support for error detection and correction on the Synopsys DDR 489 memory controller. 490 491config EDAC_XGENE 492 tristate "APM X-Gene SoC" 493 depends on (ARM64 || COMPILE_TEST) 494 help 495 Support for error detection and correction on the 496 APM X-Gene family of SOCs. 497 498config EDAC_TI 499 tristate "Texas Instruments DDR3 ECC Controller" 500 depends on ARCH_KEYSTONE || SOC_DRA7XX 501 help 502 Support for error detection and correction on the TI SoCs. 503 504config EDAC_QCOM 505 tristate "QCOM EDAC Controller" 506 depends on ARCH_QCOM && QCOM_LLCC 507 help 508 Support for error detection and correction on the 509 Qualcomm Technologies, Inc. SoCs. 510 511 This driver reports Single Bit Errors (SBEs) and Double Bit Errors (DBEs). 512 As of now, it supports error reporting for Last Level Cache Controller (LLCC) 513 of Tag RAM and Data RAM. 514 515 For debugging issues having to do with stability and overall system 516 health, you should probably say 'Y' here. 517 518config EDAC_ASPEED 519 tristate "Aspeed AST BMC SoC" 520 depends on ARCH_ASPEED 521 help 522 Support for error detection and correction on the Aspeed AST BMC SoC. 523 524 First, ECC must be configured in the bootloader. Then, this driver 525 will expose error counters via the EDAC kernel framework. 526 527config EDAC_BLUEFIELD 528 tristate "Mellanox BlueField Memory ECC" 529 depends on ARM64 && ((MELLANOX_PLATFORM && ACPI) || COMPILE_TEST) 530 help 531 Support for error detection and correction on the 532 Mellanox BlueField SoCs. 533 534config EDAC_DMC520 535 tristate "ARM DMC-520 ECC" 536 depends on ARM64 537 help 538 Support for error detection and correction on the 539 SoCs with ARM DMC-520 DRAM controller. 540 541endif # EDAC 542