xref: /openbmc/linux/drivers/dma/xilinx/xilinx_dma.c (revision d2574c33)
1 /*
2  * DMA driver for Xilinx Video DMA Engine
3  *
4  * Copyright (C) 2010-2014 Xilinx, Inc. All rights reserved.
5  *
6  * Based on the Freescale DMA driver.
7  *
8  * Description:
9  * The AXI Video Direct Memory Access (AXI VDMA) core is a soft Xilinx IP
10  * core that provides high-bandwidth direct memory access between memory
11  * and AXI4-Stream type video target peripherals. The core provides efficient
12  * two dimensional DMA operations with independent asynchronous read (S2MM)
13  * and write (MM2S) channel operation. It can be configured to have either
14  * one channel or two channels. If configured as two channels, one is to
15  * transmit to the video device (MM2S) and another is to receive from the
16  * video device (S2MM). Initialization, status, interrupt and management
17  * registers are accessed through an AXI4-Lite slave interface.
18  *
19  * The AXI Direct Memory Access (AXI DMA) core is a soft Xilinx IP core that
20  * provides high-bandwidth one dimensional direct memory access between memory
21  * and AXI4-Stream target peripherals. It supports one receive and one
22  * transmit channel, both of them optional at synthesis time.
23  *
24  * The AXI CDMA, is a soft IP, which provides high-bandwidth Direct Memory
25  * Access (DMA) between a memory-mapped source address and a memory-mapped
26  * destination address.
27  *
28  * This program is free software: you can redistribute it and/or modify
29  * it under the terms of the GNU General Public License as published by
30  * the Free Software Foundation, either version 2 of the License, or
31  * (at your option) any later version.
32  */
33 
34 #include <linux/bitops.h>
35 #include <linux/dmapool.h>
36 #include <linux/dma/xilinx_dma.h>
37 #include <linux/init.h>
38 #include <linux/interrupt.h>
39 #include <linux/io.h>
40 #include <linux/iopoll.h>
41 #include <linux/module.h>
42 #include <linux/of_address.h>
43 #include <linux/of_dma.h>
44 #include <linux/of_platform.h>
45 #include <linux/of_irq.h>
46 #include <linux/slab.h>
47 #include <linux/clk.h>
48 #include <linux/io-64-nonatomic-lo-hi.h>
49 
50 #include "../dmaengine.h"
51 
52 /* Register/Descriptor Offsets */
53 #define XILINX_DMA_MM2S_CTRL_OFFSET		0x0000
54 #define XILINX_DMA_S2MM_CTRL_OFFSET		0x0030
55 #define XILINX_VDMA_MM2S_DESC_OFFSET		0x0050
56 #define XILINX_VDMA_S2MM_DESC_OFFSET		0x00a0
57 
58 /* Control Registers */
59 #define XILINX_DMA_REG_DMACR			0x0000
60 #define XILINX_DMA_DMACR_DELAY_MAX		0xff
61 #define XILINX_DMA_DMACR_DELAY_SHIFT		24
62 #define XILINX_DMA_DMACR_FRAME_COUNT_MAX	0xff
63 #define XILINX_DMA_DMACR_FRAME_COUNT_SHIFT	16
64 #define XILINX_DMA_DMACR_ERR_IRQ		BIT(14)
65 #define XILINX_DMA_DMACR_DLY_CNT_IRQ		BIT(13)
66 #define XILINX_DMA_DMACR_FRM_CNT_IRQ		BIT(12)
67 #define XILINX_DMA_DMACR_MASTER_SHIFT		8
68 #define XILINX_DMA_DMACR_FSYNCSRC_SHIFT	5
69 #define XILINX_DMA_DMACR_FRAMECNT_EN		BIT(4)
70 #define XILINX_DMA_DMACR_GENLOCK_EN		BIT(3)
71 #define XILINX_DMA_DMACR_RESET			BIT(2)
72 #define XILINX_DMA_DMACR_CIRC_EN		BIT(1)
73 #define XILINX_DMA_DMACR_RUNSTOP		BIT(0)
74 #define XILINX_DMA_DMACR_FSYNCSRC_MASK		GENMASK(6, 5)
75 
76 #define XILINX_DMA_REG_DMASR			0x0004
77 #define XILINX_DMA_DMASR_EOL_LATE_ERR		BIT(15)
78 #define XILINX_DMA_DMASR_ERR_IRQ		BIT(14)
79 #define XILINX_DMA_DMASR_DLY_CNT_IRQ		BIT(13)
80 #define XILINX_DMA_DMASR_FRM_CNT_IRQ		BIT(12)
81 #define XILINX_DMA_DMASR_SOF_LATE_ERR		BIT(11)
82 #define XILINX_DMA_DMASR_SG_DEC_ERR		BIT(10)
83 #define XILINX_DMA_DMASR_SG_SLV_ERR		BIT(9)
84 #define XILINX_DMA_DMASR_EOF_EARLY_ERR		BIT(8)
85 #define XILINX_DMA_DMASR_SOF_EARLY_ERR		BIT(7)
86 #define XILINX_DMA_DMASR_DMA_DEC_ERR		BIT(6)
87 #define XILINX_DMA_DMASR_DMA_SLAVE_ERR		BIT(5)
88 #define XILINX_DMA_DMASR_DMA_INT_ERR		BIT(4)
89 #define XILINX_DMA_DMASR_SG_MASK		BIT(3)
90 #define XILINX_DMA_DMASR_IDLE			BIT(1)
91 #define XILINX_DMA_DMASR_HALTED		BIT(0)
92 #define XILINX_DMA_DMASR_DELAY_MASK		GENMASK(31, 24)
93 #define XILINX_DMA_DMASR_FRAME_COUNT_MASK	GENMASK(23, 16)
94 
95 #define XILINX_DMA_REG_CURDESC			0x0008
96 #define XILINX_DMA_REG_TAILDESC		0x0010
97 #define XILINX_DMA_REG_REG_INDEX		0x0014
98 #define XILINX_DMA_REG_FRMSTORE		0x0018
99 #define XILINX_DMA_REG_THRESHOLD		0x001c
100 #define XILINX_DMA_REG_FRMPTR_STS		0x0024
101 #define XILINX_DMA_REG_PARK_PTR		0x0028
102 #define XILINX_DMA_PARK_PTR_WR_REF_SHIFT	8
103 #define XILINX_DMA_PARK_PTR_WR_REF_MASK		GENMASK(12, 8)
104 #define XILINX_DMA_PARK_PTR_RD_REF_SHIFT	0
105 #define XILINX_DMA_PARK_PTR_RD_REF_MASK		GENMASK(4, 0)
106 #define XILINX_DMA_REG_VDMA_VERSION		0x002c
107 
108 /* Register Direct Mode Registers */
109 #define XILINX_DMA_REG_VSIZE			0x0000
110 #define XILINX_DMA_REG_HSIZE			0x0004
111 
112 #define XILINX_DMA_REG_FRMDLY_STRIDE		0x0008
113 #define XILINX_DMA_FRMDLY_STRIDE_FRMDLY_SHIFT	24
114 #define XILINX_DMA_FRMDLY_STRIDE_STRIDE_SHIFT	0
115 
116 #define XILINX_VDMA_REG_START_ADDRESS(n)	(0x000c + 4 * (n))
117 #define XILINX_VDMA_REG_START_ADDRESS_64(n)	(0x000c + 8 * (n))
118 
119 #define XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP	0x00ec
120 #define XILINX_VDMA_ENABLE_VERTICAL_FLIP	BIT(0)
121 
122 /* HW specific definitions */
123 #define XILINX_DMA_MAX_CHANS_PER_DEVICE	0x20
124 
125 #define XILINX_DMA_DMAXR_ALL_IRQ_MASK	\
126 		(XILINX_DMA_DMASR_FRM_CNT_IRQ | \
127 		 XILINX_DMA_DMASR_DLY_CNT_IRQ | \
128 		 XILINX_DMA_DMASR_ERR_IRQ)
129 
130 #define XILINX_DMA_DMASR_ALL_ERR_MASK	\
131 		(XILINX_DMA_DMASR_EOL_LATE_ERR | \
132 		 XILINX_DMA_DMASR_SOF_LATE_ERR | \
133 		 XILINX_DMA_DMASR_SG_DEC_ERR | \
134 		 XILINX_DMA_DMASR_SG_SLV_ERR | \
135 		 XILINX_DMA_DMASR_EOF_EARLY_ERR | \
136 		 XILINX_DMA_DMASR_SOF_EARLY_ERR | \
137 		 XILINX_DMA_DMASR_DMA_DEC_ERR | \
138 		 XILINX_DMA_DMASR_DMA_SLAVE_ERR | \
139 		 XILINX_DMA_DMASR_DMA_INT_ERR)
140 
141 /*
142  * Recoverable errors are DMA Internal error, SOF Early, EOF Early
143  * and SOF Late. They are only recoverable when C_FLUSH_ON_FSYNC
144  * is enabled in the h/w system.
145  */
146 #define XILINX_DMA_DMASR_ERR_RECOVER_MASK	\
147 		(XILINX_DMA_DMASR_SOF_LATE_ERR | \
148 		 XILINX_DMA_DMASR_EOF_EARLY_ERR | \
149 		 XILINX_DMA_DMASR_SOF_EARLY_ERR | \
150 		 XILINX_DMA_DMASR_DMA_INT_ERR)
151 
152 /* Axi VDMA Flush on Fsync bits */
153 #define XILINX_DMA_FLUSH_S2MM		3
154 #define XILINX_DMA_FLUSH_MM2S		2
155 #define XILINX_DMA_FLUSH_BOTH		1
156 
157 /* Delay loop counter to prevent hardware failure */
158 #define XILINX_DMA_LOOP_COUNT		1000000
159 
160 /* AXI DMA Specific Registers/Offsets */
161 #define XILINX_DMA_REG_SRCDSTADDR	0x18
162 #define XILINX_DMA_REG_BTT		0x28
163 
164 /* AXI DMA Specific Masks/Bit fields */
165 #define XILINX_DMA_MAX_TRANS_LEN_MIN	8
166 #define XILINX_DMA_MAX_TRANS_LEN_MAX	23
167 #define XILINX_DMA_V2_MAX_TRANS_LEN_MAX	26
168 #define XILINX_DMA_CR_COALESCE_MAX	GENMASK(23, 16)
169 #define XILINX_DMA_CR_CYCLIC_BD_EN_MASK	BIT(4)
170 #define XILINX_DMA_CR_COALESCE_SHIFT	16
171 #define XILINX_DMA_BD_SOP		BIT(27)
172 #define XILINX_DMA_BD_EOP		BIT(26)
173 #define XILINX_DMA_COALESCE_MAX		255
174 #define XILINX_DMA_NUM_DESCS		255
175 #define XILINX_DMA_NUM_APP_WORDS	5
176 
177 /* Multi-Channel DMA Descriptor offsets*/
178 #define XILINX_DMA_MCRX_CDESC(x)	(0x40 + (x-1) * 0x20)
179 #define XILINX_DMA_MCRX_TDESC(x)	(0x48 + (x-1) * 0x20)
180 
181 /* Multi-Channel DMA Masks/Shifts */
182 #define XILINX_DMA_BD_HSIZE_MASK	GENMASK(15, 0)
183 #define XILINX_DMA_BD_STRIDE_MASK	GENMASK(15, 0)
184 #define XILINX_DMA_BD_VSIZE_MASK	GENMASK(31, 19)
185 #define XILINX_DMA_BD_TDEST_MASK	GENMASK(4, 0)
186 #define XILINX_DMA_BD_STRIDE_SHIFT	0
187 #define XILINX_DMA_BD_VSIZE_SHIFT	19
188 
189 /* AXI CDMA Specific Registers/Offsets */
190 #define XILINX_CDMA_REG_SRCADDR		0x18
191 #define XILINX_CDMA_REG_DSTADDR		0x20
192 
193 /* AXI CDMA Specific Masks */
194 #define XILINX_CDMA_CR_SGMODE          BIT(3)
195 
196 #define xilinx_prep_dma_addr_t(addr)	\
197 	((dma_addr_t)((u64)addr##_##msb << 32 | (addr)))
198 /**
199  * struct xilinx_vdma_desc_hw - Hardware Descriptor
200  * @next_desc: Next Descriptor Pointer @0x00
201  * @pad1: Reserved @0x04
202  * @buf_addr: Buffer address @0x08
203  * @buf_addr_msb: MSB of Buffer address @0x0C
204  * @vsize: Vertical Size @0x10
205  * @hsize: Horizontal Size @0x14
206  * @stride: Number of bytes between the first
207  *	    pixels of each horizontal line @0x18
208  */
209 struct xilinx_vdma_desc_hw {
210 	u32 next_desc;
211 	u32 pad1;
212 	u32 buf_addr;
213 	u32 buf_addr_msb;
214 	u32 vsize;
215 	u32 hsize;
216 	u32 stride;
217 } __aligned(64);
218 
219 /**
220  * struct xilinx_axidma_desc_hw - Hardware Descriptor for AXI DMA
221  * @next_desc: Next Descriptor Pointer @0x00
222  * @next_desc_msb: MSB of Next Descriptor Pointer @0x04
223  * @buf_addr: Buffer address @0x08
224  * @buf_addr_msb: MSB of Buffer address @0x0C
225  * @mcdma_control: Control field for mcdma @0x10
226  * @vsize_stride: Vsize and Stride field for mcdma @0x14
227  * @control: Control field @0x18
228  * @status: Status field @0x1C
229  * @app: APP Fields @0x20 - 0x30
230  */
231 struct xilinx_axidma_desc_hw {
232 	u32 next_desc;
233 	u32 next_desc_msb;
234 	u32 buf_addr;
235 	u32 buf_addr_msb;
236 	u32 mcdma_control;
237 	u32 vsize_stride;
238 	u32 control;
239 	u32 status;
240 	u32 app[XILINX_DMA_NUM_APP_WORDS];
241 } __aligned(64);
242 
243 /**
244  * struct xilinx_cdma_desc_hw - Hardware Descriptor
245  * @next_desc: Next Descriptor Pointer @0x00
246  * @next_desc_msb: Next Descriptor Pointer MSB @0x04
247  * @src_addr: Source address @0x08
248  * @src_addr_msb: Source address MSB @0x0C
249  * @dest_addr: Destination address @0x10
250  * @dest_addr_msb: Destination address MSB @0x14
251  * @control: Control field @0x18
252  * @status: Status field @0x1C
253  */
254 struct xilinx_cdma_desc_hw {
255 	u32 next_desc;
256 	u32 next_desc_msb;
257 	u32 src_addr;
258 	u32 src_addr_msb;
259 	u32 dest_addr;
260 	u32 dest_addr_msb;
261 	u32 control;
262 	u32 status;
263 } __aligned(64);
264 
265 /**
266  * struct xilinx_vdma_tx_segment - Descriptor segment
267  * @hw: Hardware descriptor
268  * @node: Node in the descriptor segments list
269  * @phys: Physical address of segment
270  */
271 struct xilinx_vdma_tx_segment {
272 	struct xilinx_vdma_desc_hw hw;
273 	struct list_head node;
274 	dma_addr_t phys;
275 } __aligned(64);
276 
277 /**
278  * struct xilinx_axidma_tx_segment - Descriptor segment
279  * @hw: Hardware descriptor
280  * @node: Node in the descriptor segments list
281  * @phys: Physical address of segment
282  */
283 struct xilinx_axidma_tx_segment {
284 	struct xilinx_axidma_desc_hw hw;
285 	struct list_head node;
286 	dma_addr_t phys;
287 } __aligned(64);
288 
289 /**
290  * struct xilinx_cdma_tx_segment - Descriptor segment
291  * @hw: Hardware descriptor
292  * @node: Node in the descriptor segments list
293  * @phys: Physical address of segment
294  */
295 struct xilinx_cdma_tx_segment {
296 	struct xilinx_cdma_desc_hw hw;
297 	struct list_head node;
298 	dma_addr_t phys;
299 } __aligned(64);
300 
301 /**
302  * struct xilinx_dma_tx_descriptor - Per Transaction structure
303  * @async_tx: Async transaction descriptor
304  * @segments: TX segments list
305  * @node: Node in the channel descriptors list
306  * @cyclic: Check for cyclic transfers.
307  */
308 struct xilinx_dma_tx_descriptor {
309 	struct dma_async_tx_descriptor async_tx;
310 	struct list_head segments;
311 	struct list_head node;
312 	bool cyclic;
313 };
314 
315 /**
316  * struct xilinx_dma_chan - Driver specific DMA channel structure
317  * @xdev: Driver specific device structure
318  * @ctrl_offset: Control registers offset
319  * @desc_offset: TX descriptor registers offset
320  * @lock: Descriptor operation lock
321  * @pending_list: Descriptors waiting
322  * @active_list: Descriptors ready to submit
323  * @done_list: Complete descriptors
324  * @free_seg_list: Free descriptors
325  * @common: DMA common channel
326  * @desc_pool: Descriptors pool
327  * @dev: The dma device
328  * @irq: Channel IRQ
329  * @id: Channel ID
330  * @direction: Transfer direction
331  * @num_frms: Number of frames
332  * @has_sg: Support scatter transfers
333  * @cyclic: Check for cyclic transfers.
334  * @genlock: Support genlock mode
335  * @err: Channel has errors
336  * @idle: Check for channel idle
337  * @tasklet: Cleanup work after irq
338  * @config: Device configuration info
339  * @flush_on_fsync: Flush on Frame sync
340  * @desc_pendingcount: Descriptor pending count
341  * @ext_addr: Indicates 64 bit addressing is supported by dma channel
342  * @desc_submitcount: Descriptor h/w submitted count
343  * @residue: Residue for AXI DMA
344  * @seg_v: Statically allocated segments base
345  * @seg_p: Physical allocated segments base
346  * @cyclic_seg_v: Statically allocated segment base for cyclic transfers
347  * @cyclic_seg_p: Physical allocated segments base for cyclic dma
348  * @start_transfer: Differentiate b/w DMA IP's transfer
349  * @stop_transfer: Differentiate b/w DMA IP's quiesce
350  * @tdest: TDEST value for mcdma
351  * @has_vflip: S2MM vertical flip
352  */
353 struct xilinx_dma_chan {
354 	struct xilinx_dma_device *xdev;
355 	u32 ctrl_offset;
356 	u32 desc_offset;
357 	spinlock_t lock;
358 	struct list_head pending_list;
359 	struct list_head active_list;
360 	struct list_head done_list;
361 	struct list_head free_seg_list;
362 	struct dma_chan common;
363 	struct dma_pool *desc_pool;
364 	struct device *dev;
365 	int irq;
366 	int id;
367 	enum dma_transfer_direction direction;
368 	int num_frms;
369 	bool has_sg;
370 	bool cyclic;
371 	bool genlock;
372 	bool err;
373 	bool idle;
374 	struct tasklet_struct tasklet;
375 	struct xilinx_vdma_config config;
376 	bool flush_on_fsync;
377 	u32 desc_pendingcount;
378 	bool ext_addr;
379 	u32 desc_submitcount;
380 	u32 residue;
381 	struct xilinx_axidma_tx_segment *seg_v;
382 	dma_addr_t seg_p;
383 	struct xilinx_axidma_tx_segment *cyclic_seg_v;
384 	dma_addr_t cyclic_seg_p;
385 	void (*start_transfer)(struct xilinx_dma_chan *chan);
386 	int (*stop_transfer)(struct xilinx_dma_chan *chan);
387 	u16 tdest;
388 	bool has_vflip;
389 };
390 
391 /**
392  * enum xdma_ip_type - DMA IP type.
393  *
394  * @XDMA_TYPE_AXIDMA: Axi dma ip.
395  * @XDMA_TYPE_CDMA: Axi cdma ip.
396  * @XDMA_TYPE_VDMA: Axi vdma ip.
397  *
398  */
399 enum xdma_ip_type {
400 	XDMA_TYPE_AXIDMA = 0,
401 	XDMA_TYPE_CDMA,
402 	XDMA_TYPE_VDMA,
403 };
404 
405 struct xilinx_dma_config {
406 	enum xdma_ip_type dmatype;
407 	int (*clk_init)(struct platform_device *pdev, struct clk **axi_clk,
408 			struct clk **tx_clk, struct clk **txs_clk,
409 			struct clk **rx_clk, struct clk **rxs_clk);
410 };
411 
412 /**
413  * struct xilinx_dma_device - DMA device structure
414  * @regs: I/O mapped base address
415  * @dev: Device Structure
416  * @common: DMA device structure
417  * @chan: Driver specific DMA channel
418  * @mcdma: Specifies whether Multi-Channel is present or not
419  * @flush_on_fsync: Flush on frame sync
420  * @ext_addr: Indicates 64 bit addressing is supported by dma device
421  * @pdev: Platform device structure pointer
422  * @dma_config: DMA config structure
423  * @axi_clk: DMA Axi4-lite interace clock
424  * @tx_clk: DMA mm2s clock
425  * @txs_clk: DMA mm2s stream clock
426  * @rx_clk: DMA s2mm clock
427  * @rxs_clk: DMA s2mm stream clock
428  * @nr_channels: Number of channels DMA device supports
429  * @chan_id: DMA channel identifier
430  * @max_buffer_len: Max buffer length
431  */
432 struct xilinx_dma_device {
433 	void __iomem *regs;
434 	struct device *dev;
435 	struct dma_device common;
436 	struct xilinx_dma_chan *chan[XILINX_DMA_MAX_CHANS_PER_DEVICE];
437 	bool mcdma;
438 	u32 flush_on_fsync;
439 	bool ext_addr;
440 	struct platform_device  *pdev;
441 	const struct xilinx_dma_config *dma_config;
442 	struct clk *axi_clk;
443 	struct clk *tx_clk;
444 	struct clk *txs_clk;
445 	struct clk *rx_clk;
446 	struct clk *rxs_clk;
447 	u32 nr_channels;
448 	u32 chan_id;
449 	u32 max_buffer_len;
450 };
451 
452 /* Macros */
453 #define to_xilinx_chan(chan) \
454 	container_of(chan, struct xilinx_dma_chan, common)
455 #define to_dma_tx_descriptor(tx) \
456 	container_of(tx, struct xilinx_dma_tx_descriptor, async_tx)
457 #define xilinx_dma_poll_timeout(chan, reg, val, cond, delay_us, timeout_us) \
458 	readl_poll_timeout(chan->xdev->regs + chan->ctrl_offset + reg, val, \
459 			   cond, delay_us, timeout_us)
460 
461 /* IO accessors */
462 static inline u32 dma_read(struct xilinx_dma_chan *chan, u32 reg)
463 {
464 	return ioread32(chan->xdev->regs + reg);
465 }
466 
467 static inline void dma_write(struct xilinx_dma_chan *chan, u32 reg, u32 value)
468 {
469 	iowrite32(value, chan->xdev->regs + reg);
470 }
471 
472 static inline void vdma_desc_write(struct xilinx_dma_chan *chan, u32 reg,
473 				   u32 value)
474 {
475 	dma_write(chan, chan->desc_offset + reg, value);
476 }
477 
478 static inline u32 dma_ctrl_read(struct xilinx_dma_chan *chan, u32 reg)
479 {
480 	return dma_read(chan, chan->ctrl_offset + reg);
481 }
482 
483 static inline void dma_ctrl_write(struct xilinx_dma_chan *chan, u32 reg,
484 				   u32 value)
485 {
486 	dma_write(chan, chan->ctrl_offset + reg, value);
487 }
488 
489 static inline void dma_ctrl_clr(struct xilinx_dma_chan *chan, u32 reg,
490 				 u32 clr)
491 {
492 	dma_ctrl_write(chan, reg, dma_ctrl_read(chan, reg) & ~clr);
493 }
494 
495 static inline void dma_ctrl_set(struct xilinx_dma_chan *chan, u32 reg,
496 				 u32 set)
497 {
498 	dma_ctrl_write(chan, reg, dma_ctrl_read(chan, reg) | set);
499 }
500 
501 /**
502  * vdma_desc_write_64 - 64-bit descriptor write
503  * @chan: Driver specific VDMA channel
504  * @reg: Register to write
505  * @value_lsb: lower address of the descriptor.
506  * @value_msb: upper address of the descriptor.
507  *
508  * Since vdma driver is trying to write to a register offset which is not a
509  * multiple of 64 bits(ex : 0x5c), we are writing as two separate 32 bits
510  * instead of a single 64 bit register write.
511  */
512 static inline void vdma_desc_write_64(struct xilinx_dma_chan *chan, u32 reg,
513 				      u32 value_lsb, u32 value_msb)
514 {
515 	/* Write the lsb 32 bits*/
516 	writel(value_lsb, chan->xdev->regs + chan->desc_offset + reg);
517 
518 	/* Write the msb 32 bits */
519 	writel(value_msb, chan->xdev->regs + chan->desc_offset + reg + 4);
520 }
521 
522 static inline void dma_writeq(struct xilinx_dma_chan *chan, u32 reg, u64 value)
523 {
524 	lo_hi_writeq(value, chan->xdev->regs + chan->ctrl_offset + reg);
525 }
526 
527 static inline void xilinx_write(struct xilinx_dma_chan *chan, u32 reg,
528 				dma_addr_t addr)
529 {
530 	if (chan->ext_addr)
531 		dma_writeq(chan, reg, addr);
532 	else
533 		dma_ctrl_write(chan, reg, addr);
534 }
535 
536 static inline void xilinx_axidma_buf(struct xilinx_dma_chan *chan,
537 				     struct xilinx_axidma_desc_hw *hw,
538 				     dma_addr_t buf_addr, size_t sg_used,
539 				     size_t period_len)
540 {
541 	if (chan->ext_addr) {
542 		hw->buf_addr = lower_32_bits(buf_addr + sg_used + period_len);
543 		hw->buf_addr_msb = upper_32_bits(buf_addr + sg_used +
544 						 period_len);
545 	} else {
546 		hw->buf_addr = buf_addr + sg_used + period_len;
547 	}
548 }
549 
550 /* -----------------------------------------------------------------------------
551  * Descriptors and segments alloc and free
552  */
553 
554 /**
555  * xilinx_vdma_alloc_tx_segment - Allocate transaction segment
556  * @chan: Driver specific DMA channel
557  *
558  * Return: The allocated segment on success and NULL on failure.
559  */
560 static struct xilinx_vdma_tx_segment *
561 xilinx_vdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
562 {
563 	struct xilinx_vdma_tx_segment *segment;
564 	dma_addr_t phys;
565 
566 	segment = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &phys);
567 	if (!segment)
568 		return NULL;
569 
570 	segment->phys = phys;
571 
572 	return segment;
573 }
574 
575 /**
576  * xilinx_cdma_alloc_tx_segment - Allocate transaction segment
577  * @chan: Driver specific DMA channel
578  *
579  * Return: The allocated segment on success and NULL on failure.
580  */
581 static struct xilinx_cdma_tx_segment *
582 xilinx_cdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
583 {
584 	struct xilinx_cdma_tx_segment *segment;
585 	dma_addr_t phys;
586 
587 	segment = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &phys);
588 	if (!segment)
589 		return NULL;
590 
591 	segment->phys = phys;
592 
593 	return segment;
594 }
595 
596 /**
597  * xilinx_axidma_alloc_tx_segment - Allocate transaction segment
598  * @chan: Driver specific DMA channel
599  *
600  * Return: The allocated segment on success and NULL on failure.
601  */
602 static struct xilinx_axidma_tx_segment *
603 xilinx_axidma_alloc_tx_segment(struct xilinx_dma_chan *chan)
604 {
605 	struct xilinx_axidma_tx_segment *segment = NULL;
606 	unsigned long flags;
607 
608 	spin_lock_irqsave(&chan->lock, flags);
609 	if (!list_empty(&chan->free_seg_list)) {
610 		segment = list_first_entry(&chan->free_seg_list,
611 					   struct xilinx_axidma_tx_segment,
612 					   node);
613 		list_del(&segment->node);
614 	}
615 	spin_unlock_irqrestore(&chan->lock, flags);
616 
617 	return segment;
618 }
619 
620 static void xilinx_dma_clean_hw_desc(struct xilinx_axidma_desc_hw *hw)
621 {
622 	u32 next_desc = hw->next_desc;
623 	u32 next_desc_msb = hw->next_desc_msb;
624 
625 	memset(hw, 0, sizeof(struct xilinx_axidma_desc_hw));
626 
627 	hw->next_desc = next_desc;
628 	hw->next_desc_msb = next_desc_msb;
629 }
630 
631 /**
632  * xilinx_dma_free_tx_segment - Free transaction segment
633  * @chan: Driver specific DMA channel
634  * @segment: DMA transaction segment
635  */
636 static void xilinx_dma_free_tx_segment(struct xilinx_dma_chan *chan,
637 				struct xilinx_axidma_tx_segment *segment)
638 {
639 	xilinx_dma_clean_hw_desc(&segment->hw);
640 
641 	list_add_tail(&segment->node, &chan->free_seg_list);
642 }
643 
644 /**
645  * xilinx_cdma_free_tx_segment - Free transaction segment
646  * @chan: Driver specific DMA channel
647  * @segment: DMA transaction segment
648  */
649 static void xilinx_cdma_free_tx_segment(struct xilinx_dma_chan *chan,
650 				struct xilinx_cdma_tx_segment *segment)
651 {
652 	dma_pool_free(chan->desc_pool, segment, segment->phys);
653 }
654 
655 /**
656  * xilinx_vdma_free_tx_segment - Free transaction segment
657  * @chan: Driver specific DMA channel
658  * @segment: DMA transaction segment
659  */
660 static void xilinx_vdma_free_tx_segment(struct xilinx_dma_chan *chan,
661 					struct xilinx_vdma_tx_segment *segment)
662 {
663 	dma_pool_free(chan->desc_pool, segment, segment->phys);
664 }
665 
666 /**
667  * xilinx_dma_tx_descriptor - Allocate transaction descriptor
668  * @chan: Driver specific DMA channel
669  *
670  * Return: The allocated descriptor on success and NULL on failure.
671  */
672 static struct xilinx_dma_tx_descriptor *
673 xilinx_dma_alloc_tx_descriptor(struct xilinx_dma_chan *chan)
674 {
675 	struct xilinx_dma_tx_descriptor *desc;
676 
677 	desc = kzalloc(sizeof(*desc), GFP_KERNEL);
678 	if (!desc)
679 		return NULL;
680 
681 	INIT_LIST_HEAD(&desc->segments);
682 
683 	return desc;
684 }
685 
686 /**
687  * xilinx_dma_free_tx_descriptor - Free transaction descriptor
688  * @chan: Driver specific DMA channel
689  * @desc: DMA transaction descriptor
690  */
691 static void
692 xilinx_dma_free_tx_descriptor(struct xilinx_dma_chan *chan,
693 			       struct xilinx_dma_tx_descriptor *desc)
694 {
695 	struct xilinx_vdma_tx_segment *segment, *next;
696 	struct xilinx_cdma_tx_segment *cdma_segment, *cdma_next;
697 	struct xilinx_axidma_tx_segment *axidma_segment, *axidma_next;
698 
699 	if (!desc)
700 		return;
701 
702 	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
703 		list_for_each_entry_safe(segment, next, &desc->segments, node) {
704 			list_del(&segment->node);
705 			xilinx_vdma_free_tx_segment(chan, segment);
706 		}
707 	} else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
708 		list_for_each_entry_safe(cdma_segment, cdma_next,
709 					 &desc->segments, node) {
710 			list_del(&cdma_segment->node);
711 			xilinx_cdma_free_tx_segment(chan, cdma_segment);
712 		}
713 	} else {
714 		list_for_each_entry_safe(axidma_segment, axidma_next,
715 					 &desc->segments, node) {
716 			list_del(&axidma_segment->node);
717 			xilinx_dma_free_tx_segment(chan, axidma_segment);
718 		}
719 	}
720 
721 	kfree(desc);
722 }
723 
724 /* Required functions */
725 
726 /**
727  * xilinx_dma_free_desc_list - Free descriptors list
728  * @chan: Driver specific DMA channel
729  * @list: List to parse and delete the descriptor
730  */
731 static void xilinx_dma_free_desc_list(struct xilinx_dma_chan *chan,
732 					struct list_head *list)
733 {
734 	struct xilinx_dma_tx_descriptor *desc, *next;
735 
736 	list_for_each_entry_safe(desc, next, list, node) {
737 		list_del(&desc->node);
738 		xilinx_dma_free_tx_descriptor(chan, desc);
739 	}
740 }
741 
742 /**
743  * xilinx_dma_free_descriptors - Free channel descriptors
744  * @chan: Driver specific DMA channel
745  */
746 static void xilinx_dma_free_descriptors(struct xilinx_dma_chan *chan)
747 {
748 	unsigned long flags;
749 
750 	spin_lock_irqsave(&chan->lock, flags);
751 
752 	xilinx_dma_free_desc_list(chan, &chan->pending_list);
753 	xilinx_dma_free_desc_list(chan, &chan->done_list);
754 	xilinx_dma_free_desc_list(chan, &chan->active_list);
755 
756 	spin_unlock_irqrestore(&chan->lock, flags);
757 }
758 
759 /**
760  * xilinx_dma_free_chan_resources - Free channel resources
761  * @dchan: DMA channel
762  */
763 static void xilinx_dma_free_chan_resources(struct dma_chan *dchan)
764 {
765 	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
766 	unsigned long flags;
767 
768 	dev_dbg(chan->dev, "Free all channel resources.\n");
769 
770 	xilinx_dma_free_descriptors(chan);
771 
772 	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
773 		spin_lock_irqsave(&chan->lock, flags);
774 		INIT_LIST_HEAD(&chan->free_seg_list);
775 		spin_unlock_irqrestore(&chan->lock, flags);
776 
777 		/* Free memory that is allocated for BD */
778 		dma_free_coherent(chan->dev, sizeof(*chan->seg_v) *
779 				  XILINX_DMA_NUM_DESCS, chan->seg_v,
780 				  chan->seg_p);
781 
782 		/* Free Memory that is allocated for cyclic DMA Mode */
783 		dma_free_coherent(chan->dev, sizeof(*chan->cyclic_seg_v),
784 				  chan->cyclic_seg_v, chan->cyclic_seg_p);
785 	}
786 
787 	if (chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIDMA) {
788 		dma_pool_destroy(chan->desc_pool);
789 		chan->desc_pool = NULL;
790 	}
791 }
792 
793 /**
794  * xilinx_dma_chan_handle_cyclic - Cyclic dma callback
795  * @chan: Driver specific dma channel
796  * @desc: dma transaction descriptor
797  * @flags: flags for spin lock
798  */
799 static void xilinx_dma_chan_handle_cyclic(struct xilinx_dma_chan *chan,
800 					  struct xilinx_dma_tx_descriptor *desc,
801 					  unsigned long *flags)
802 {
803 	dma_async_tx_callback callback;
804 	void *callback_param;
805 
806 	callback = desc->async_tx.callback;
807 	callback_param = desc->async_tx.callback_param;
808 	if (callback) {
809 		spin_unlock_irqrestore(&chan->lock, *flags);
810 		callback(callback_param);
811 		spin_lock_irqsave(&chan->lock, *flags);
812 	}
813 }
814 
815 /**
816  * xilinx_dma_chan_desc_cleanup - Clean channel descriptors
817  * @chan: Driver specific DMA channel
818  */
819 static void xilinx_dma_chan_desc_cleanup(struct xilinx_dma_chan *chan)
820 {
821 	struct xilinx_dma_tx_descriptor *desc, *next;
822 	unsigned long flags;
823 
824 	spin_lock_irqsave(&chan->lock, flags);
825 
826 	list_for_each_entry_safe(desc, next, &chan->done_list, node) {
827 		struct dmaengine_desc_callback cb;
828 
829 		if (desc->cyclic) {
830 			xilinx_dma_chan_handle_cyclic(chan, desc, &flags);
831 			break;
832 		}
833 
834 		/* Remove from the list of running transactions */
835 		list_del(&desc->node);
836 
837 		/* Run the link descriptor callback function */
838 		dmaengine_desc_get_callback(&desc->async_tx, &cb);
839 		if (dmaengine_desc_callback_valid(&cb)) {
840 			spin_unlock_irqrestore(&chan->lock, flags);
841 			dmaengine_desc_callback_invoke(&cb, NULL);
842 			spin_lock_irqsave(&chan->lock, flags);
843 		}
844 
845 		/* Run any dependencies, then free the descriptor */
846 		dma_run_dependencies(&desc->async_tx);
847 		xilinx_dma_free_tx_descriptor(chan, desc);
848 	}
849 
850 	spin_unlock_irqrestore(&chan->lock, flags);
851 }
852 
853 /**
854  * xilinx_dma_do_tasklet - Schedule completion tasklet
855  * @data: Pointer to the Xilinx DMA channel structure
856  */
857 static void xilinx_dma_do_tasklet(unsigned long data)
858 {
859 	struct xilinx_dma_chan *chan = (struct xilinx_dma_chan *)data;
860 
861 	xilinx_dma_chan_desc_cleanup(chan);
862 }
863 
864 /**
865  * xilinx_dma_alloc_chan_resources - Allocate channel resources
866  * @dchan: DMA channel
867  *
868  * Return: '0' on success and failure value on error
869  */
870 static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
871 {
872 	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
873 	int i;
874 
875 	/* Has this channel already been allocated? */
876 	if (chan->desc_pool)
877 		return 0;
878 
879 	/*
880 	 * We need the descriptor to be aligned to 64bytes
881 	 * for meeting Xilinx VDMA specification requirement.
882 	 */
883 	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
884 		/* Allocate the buffer descriptors. */
885 		chan->seg_v = dma_alloc_coherent(chan->dev,
886 						 sizeof(*chan->seg_v) * XILINX_DMA_NUM_DESCS,
887 						 &chan->seg_p, GFP_KERNEL);
888 		if (!chan->seg_v) {
889 			dev_err(chan->dev,
890 				"unable to allocate channel %d descriptors\n",
891 				chan->id);
892 			return -ENOMEM;
893 		}
894 		/*
895 		 * For cyclic DMA mode we need to program the tail Descriptor
896 		 * register with a value which is not a part of the BD chain
897 		 * so allocating a desc segment during channel allocation for
898 		 * programming tail descriptor.
899 		 */
900 		chan->cyclic_seg_v = dma_alloc_coherent(chan->dev,
901 							sizeof(*chan->cyclic_seg_v),
902 							&chan->cyclic_seg_p,
903 							GFP_KERNEL);
904 		if (!chan->cyclic_seg_v) {
905 			dev_err(chan->dev,
906 				"unable to allocate desc segment for cyclic DMA\n");
907 			dma_free_coherent(chan->dev, sizeof(*chan->seg_v) *
908 				XILINX_DMA_NUM_DESCS, chan->seg_v,
909 				chan->seg_p);
910 			return -ENOMEM;
911 		}
912 		chan->cyclic_seg_v->phys = chan->cyclic_seg_p;
913 
914 		for (i = 0; i < XILINX_DMA_NUM_DESCS; i++) {
915 			chan->seg_v[i].hw.next_desc =
916 			lower_32_bits(chan->seg_p + sizeof(*chan->seg_v) *
917 				((i + 1) % XILINX_DMA_NUM_DESCS));
918 			chan->seg_v[i].hw.next_desc_msb =
919 			upper_32_bits(chan->seg_p + sizeof(*chan->seg_v) *
920 				((i + 1) % XILINX_DMA_NUM_DESCS));
921 			chan->seg_v[i].phys = chan->seg_p +
922 				sizeof(*chan->seg_v) * i;
923 			list_add_tail(&chan->seg_v[i].node,
924 				      &chan->free_seg_list);
925 		}
926 	} else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
927 		chan->desc_pool = dma_pool_create("xilinx_cdma_desc_pool",
928 				   chan->dev,
929 				   sizeof(struct xilinx_cdma_tx_segment),
930 				   __alignof__(struct xilinx_cdma_tx_segment),
931 				   0);
932 	} else {
933 		chan->desc_pool = dma_pool_create("xilinx_vdma_desc_pool",
934 				     chan->dev,
935 				     sizeof(struct xilinx_vdma_tx_segment),
936 				     __alignof__(struct xilinx_vdma_tx_segment),
937 				     0);
938 	}
939 
940 	if (!chan->desc_pool &&
941 	    (chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIDMA)) {
942 		dev_err(chan->dev,
943 			"unable to allocate channel %d descriptor pool\n",
944 			chan->id);
945 		return -ENOMEM;
946 	}
947 
948 	dma_cookie_init(dchan);
949 
950 	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
951 		/* For AXI DMA resetting once channel will reset the
952 		 * other channel as well so enable the interrupts here.
953 		 */
954 		dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
955 			      XILINX_DMA_DMAXR_ALL_IRQ_MASK);
956 	}
957 
958 	if ((chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
959 		dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
960 			     XILINX_CDMA_CR_SGMODE);
961 
962 	return 0;
963 }
964 
965 /**
966  * xilinx_dma_calc_copysize - Calculate the amount of data to copy
967  * @chan: Driver specific DMA channel
968  * @size: Total data that needs to be copied
969  * @done: Amount of data that has been already copied
970  *
971  * Return: Amount of data that has to be copied
972  */
973 static int xilinx_dma_calc_copysize(struct xilinx_dma_chan *chan,
974 				    int size, int done)
975 {
976 	size_t copy;
977 
978 	copy = min_t(size_t, size - done,
979 		     chan->xdev->max_buffer_len);
980 
981 	if ((copy + done < size) &&
982 	    chan->xdev->common.copy_align) {
983 		/*
984 		 * If this is not the last descriptor, make sure
985 		 * the next one will be properly aligned
986 		 */
987 		copy = rounddown(copy,
988 				 (1 << chan->xdev->common.copy_align));
989 	}
990 	return copy;
991 }
992 
993 /**
994  * xilinx_dma_tx_status - Get DMA transaction status
995  * @dchan: DMA channel
996  * @cookie: Transaction identifier
997  * @txstate: Transaction state
998  *
999  * Return: DMA transaction status
1000  */
1001 static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
1002 					dma_cookie_t cookie,
1003 					struct dma_tx_state *txstate)
1004 {
1005 	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1006 	struct xilinx_dma_tx_descriptor *desc;
1007 	struct xilinx_axidma_tx_segment *segment;
1008 	struct xilinx_axidma_desc_hw *hw;
1009 	enum dma_status ret;
1010 	unsigned long flags;
1011 	u32 residue = 0;
1012 
1013 	ret = dma_cookie_status(dchan, cookie, txstate);
1014 	if (ret == DMA_COMPLETE || !txstate)
1015 		return ret;
1016 
1017 	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
1018 		spin_lock_irqsave(&chan->lock, flags);
1019 
1020 		desc = list_last_entry(&chan->active_list,
1021 				       struct xilinx_dma_tx_descriptor, node);
1022 		if (chan->has_sg) {
1023 			list_for_each_entry(segment, &desc->segments, node) {
1024 				hw = &segment->hw;
1025 				residue += (hw->control - hw->status) &
1026 					   chan->xdev->max_buffer_len;
1027 			}
1028 		}
1029 		spin_unlock_irqrestore(&chan->lock, flags);
1030 
1031 		chan->residue = residue;
1032 		dma_set_residue(txstate, chan->residue);
1033 	}
1034 
1035 	return ret;
1036 }
1037 
1038 /**
1039  * xilinx_dma_stop_transfer - Halt DMA channel
1040  * @chan: Driver specific DMA channel
1041  *
1042  * Return: '0' on success and failure value on error
1043  */
1044 static int xilinx_dma_stop_transfer(struct xilinx_dma_chan *chan)
1045 {
1046 	u32 val;
1047 
1048 	dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RUNSTOP);
1049 
1050 	/* Wait for the hardware to halt */
1051 	return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
1052 				       val & XILINX_DMA_DMASR_HALTED, 0,
1053 				       XILINX_DMA_LOOP_COUNT);
1054 }
1055 
1056 /**
1057  * xilinx_cdma_stop_transfer - Wait for the current transfer to complete
1058  * @chan: Driver specific DMA channel
1059  *
1060  * Return: '0' on success and failure value on error
1061  */
1062 static int xilinx_cdma_stop_transfer(struct xilinx_dma_chan *chan)
1063 {
1064 	u32 val;
1065 
1066 	return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
1067 				       val & XILINX_DMA_DMASR_IDLE, 0,
1068 				       XILINX_DMA_LOOP_COUNT);
1069 }
1070 
1071 /**
1072  * xilinx_dma_start - Start DMA channel
1073  * @chan: Driver specific DMA channel
1074  */
1075 static void xilinx_dma_start(struct xilinx_dma_chan *chan)
1076 {
1077 	int err;
1078 	u32 val;
1079 
1080 	dma_ctrl_set(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RUNSTOP);
1081 
1082 	/* Wait for the hardware to start */
1083 	err = xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
1084 				      !(val & XILINX_DMA_DMASR_HALTED), 0,
1085 				      XILINX_DMA_LOOP_COUNT);
1086 
1087 	if (err) {
1088 		dev_err(chan->dev, "Cannot start channel %p: %x\n",
1089 			chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
1090 
1091 		chan->err = true;
1092 	}
1093 }
1094 
1095 /**
1096  * xilinx_vdma_start_transfer - Starts VDMA transfer
1097  * @chan: Driver specific channel struct pointer
1098  */
1099 static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
1100 {
1101 	struct xilinx_vdma_config *config = &chan->config;
1102 	struct xilinx_dma_tx_descriptor *desc, *tail_desc;
1103 	u32 reg, j;
1104 	struct xilinx_vdma_tx_segment *segment, *last = NULL;
1105 	int i = 0;
1106 
1107 	/* This function was invoked with lock held */
1108 	if (chan->err)
1109 		return;
1110 
1111 	if (!chan->idle)
1112 		return;
1113 
1114 	if (list_empty(&chan->pending_list))
1115 		return;
1116 
1117 	desc = list_first_entry(&chan->pending_list,
1118 				struct xilinx_dma_tx_descriptor, node);
1119 	tail_desc = list_last_entry(&chan->pending_list,
1120 				    struct xilinx_dma_tx_descriptor, node);
1121 
1122 	/* Configure the hardware using info in the config structure */
1123 	if (chan->has_vflip) {
1124 		reg = dma_read(chan, XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP);
1125 		reg &= ~XILINX_VDMA_ENABLE_VERTICAL_FLIP;
1126 		reg |= config->vflip_en;
1127 		dma_write(chan, XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP,
1128 			  reg);
1129 	}
1130 
1131 	reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
1132 
1133 	if (config->frm_cnt_en)
1134 		reg |= XILINX_DMA_DMACR_FRAMECNT_EN;
1135 	else
1136 		reg &= ~XILINX_DMA_DMACR_FRAMECNT_EN;
1137 
1138 	/* If not parking, enable circular mode */
1139 	if (config->park)
1140 		reg &= ~XILINX_DMA_DMACR_CIRC_EN;
1141 	else
1142 		reg |= XILINX_DMA_DMACR_CIRC_EN;
1143 
1144 	dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
1145 
1146 	j = chan->desc_submitcount;
1147 	reg = dma_read(chan, XILINX_DMA_REG_PARK_PTR);
1148 	if (chan->direction == DMA_MEM_TO_DEV) {
1149 		reg &= ~XILINX_DMA_PARK_PTR_RD_REF_MASK;
1150 		reg |= j << XILINX_DMA_PARK_PTR_RD_REF_SHIFT;
1151 	} else {
1152 		reg &= ~XILINX_DMA_PARK_PTR_WR_REF_MASK;
1153 		reg |= j << XILINX_DMA_PARK_PTR_WR_REF_SHIFT;
1154 	}
1155 	dma_write(chan, XILINX_DMA_REG_PARK_PTR, reg);
1156 
1157 	/* Start the hardware */
1158 	xilinx_dma_start(chan);
1159 
1160 	if (chan->err)
1161 		return;
1162 
1163 	/* Start the transfer */
1164 	if (chan->desc_submitcount < chan->num_frms)
1165 		i = chan->desc_submitcount;
1166 
1167 	list_for_each_entry(segment, &desc->segments, node) {
1168 		if (chan->ext_addr)
1169 			vdma_desc_write_64(chan,
1170 				   XILINX_VDMA_REG_START_ADDRESS_64(i++),
1171 				   segment->hw.buf_addr,
1172 				   segment->hw.buf_addr_msb);
1173 		else
1174 			vdma_desc_write(chan,
1175 					XILINX_VDMA_REG_START_ADDRESS(i++),
1176 					segment->hw.buf_addr);
1177 
1178 		last = segment;
1179 	}
1180 
1181 	if (!last)
1182 		return;
1183 
1184 	/* HW expects these parameters to be same for one transaction */
1185 	vdma_desc_write(chan, XILINX_DMA_REG_HSIZE, last->hw.hsize);
1186 	vdma_desc_write(chan, XILINX_DMA_REG_FRMDLY_STRIDE,
1187 			last->hw.stride);
1188 	vdma_desc_write(chan, XILINX_DMA_REG_VSIZE, last->hw.vsize);
1189 
1190 	chan->desc_submitcount++;
1191 	chan->desc_pendingcount--;
1192 	list_del(&desc->node);
1193 	list_add_tail(&desc->node, &chan->active_list);
1194 	if (chan->desc_submitcount == chan->num_frms)
1195 		chan->desc_submitcount = 0;
1196 
1197 	chan->idle = false;
1198 }
1199 
1200 /**
1201  * xilinx_cdma_start_transfer - Starts cdma transfer
1202  * @chan: Driver specific channel struct pointer
1203  */
1204 static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
1205 {
1206 	struct xilinx_dma_tx_descriptor *head_desc, *tail_desc;
1207 	struct xilinx_cdma_tx_segment *tail_segment;
1208 	u32 ctrl_reg = dma_read(chan, XILINX_DMA_REG_DMACR);
1209 
1210 	if (chan->err)
1211 		return;
1212 
1213 	if (!chan->idle)
1214 		return;
1215 
1216 	if (list_empty(&chan->pending_list))
1217 		return;
1218 
1219 	head_desc = list_first_entry(&chan->pending_list,
1220 				     struct xilinx_dma_tx_descriptor, node);
1221 	tail_desc = list_last_entry(&chan->pending_list,
1222 				    struct xilinx_dma_tx_descriptor, node);
1223 	tail_segment = list_last_entry(&tail_desc->segments,
1224 				       struct xilinx_cdma_tx_segment, node);
1225 
1226 	if (chan->desc_pendingcount <= XILINX_DMA_COALESCE_MAX) {
1227 		ctrl_reg &= ~XILINX_DMA_CR_COALESCE_MAX;
1228 		ctrl_reg |= chan->desc_pendingcount <<
1229 				XILINX_DMA_CR_COALESCE_SHIFT;
1230 		dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, ctrl_reg);
1231 	}
1232 
1233 	if (chan->has_sg) {
1234 		dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
1235 			     XILINX_CDMA_CR_SGMODE);
1236 
1237 		dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
1238 			     XILINX_CDMA_CR_SGMODE);
1239 
1240 		xilinx_write(chan, XILINX_DMA_REG_CURDESC,
1241 			     head_desc->async_tx.phys);
1242 
1243 		/* Update tail ptr register which will start the transfer */
1244 		xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
1245 			     tail_segment->phys);
1246 	} else {
1247 		/* In simple mode */
1248 		struct xilinx_cdma_tx_segment *segment;
1249 		struct xilinx_cdma_desc_hw *hw;
1250 
1251 		segment = list_first_entry(&head_desc->segments,
1252 					   struct xilinx_cdma_tx_segment,
1253 					   node);
1254 
1255 		hw = &segment->hw;
1256 
1257 		xilinx_write(chan, XILINX_CDMA_REG_SRCADDR,
1258 			     xilinx_prep_dma_addr_t(hw->src_addr));
1259 		xilinx_write(chan, XILINX_CDMA_REG_DSTADDR,
1260 			     xilinx_prep_dma_addr_t(hw->dest_addr));
1261 
1262 		/* Start the transfer */
1263 		dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
1264 				hw->control & chan->xdev->max_buffer_len);
1265 	}
1266 
1267 	list_splice_tail_init(&chan->pending_list, &chan->active_list);
1268 	chan->desc_pendingcount = 0;
1269 	chan->idle = false;
1270 }
1271 
1272 /**
1273  * xilinx_dma_start_transfer - Starts DMA transfer
1274  * @chan: Driver specific channel struct pointer
1275  */
1276 static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
1277 {
1278 	struct xilinx_dma_tx_descriptor *head_desc, *tail_desc;
1279 	struct xilinx_axidma_tx_segment *tail_segment;
1280 	u32 reg;
1281 
1282 	if (chan->err)
1283 		return;
1284 
1285 	if (list_empty(&chan->pending_list))
1286 		return;
1287 
1288 	if (!chan->idle)
1289 		return;
1290 
1291 	head_desc = list_first_entry(&chan->pending_list,
1292 				     struct xilinx_dma_tx_descriptor, node);
1293 	tail_desc = list_last_entry(&chan->pending_list,
1294 				    struct xilinx_dma_tx_descriptor, node);
1295 	tail_segment = list_last_entry(&tail_desc->segments,
1296 				       struct xilinx_axidma_tx_segment, node);
1297 
1298 	reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
1299 
1300 	if (chan->desc_pendingcount <= XILINX_DMA_COALESCE_MAX) {
1301 		reg &= ~XILINX_DMA_CR_COALESCE_MAX;
1302 		reg |= chan->desc_pendingcount <<
1303 				  XILINX_DMA_CR_COALESCE_SHIFT;
1304 		dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
1305 	}
1306 
1307 	if (chan->has_sg && !chan->xdev->mcdma)
1308 		xilinx_write(chan, XILINX_DMA_REG_CURDESC,
1309 			     head_desc->async_tx.phys);
1310 
1311 	if (chan->has_sg && chan->xdev->mcdma) {
1312 		if (chan->direction == DMA_MEM_TO_DEV) {
1313 			dma_ctrl_write(chan, XILINX_DMA_REG_CURDESC,
1314 				       head_desc->async_tx.phys);
1315 		} else {
1316 			if (!chan->tdest) {
1317 				dma_ctrl_write(chan, XILINX_DMA_REG_CURDESC,
1318 				       head_desc->async_tx.phys);
1319 			} else {
1320 				dma_ctrl_write(chan,
1321 					XILINX_DMA_MCRX_CDESC(chan->tdest),
1322 				       head_desc->async_tx.phys);
1323 			}
1324 		}
1325 	}
1326 
1327 	xilinx_dma_start(chan);
1328 
1329 	if (chan->err)
1330 		return;
1331 
1332 	/* Start the transfer */
1333 	if (chan->has_sg && !chan->xdev->mcdma) {
1334 		if (chan->cyclic)
1335 			xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
1336 				     chan->cyclic_seg_v->phys);
1337 		else
1338 			xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
1339 				     tail_segment->phys);
1340 	} else if (chan->has_sg && chan->xdev->mcdma) {
1341 		if (chan->direction == DMA_MEM_TO_DEV) {
1342 			dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC,
1343 			       tail_segment->phys);
1344 		} else {
1345 			if (!chan->tdest) {
1346 				dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC,
1347 					       tail_segment->phys);
1348 			} else {
1349 				dma_ctrl_write(chan,
1350 					XILINX_DMA_MCRX_TDESC(chan->tdest),
1351 					tail_segment->phys);
1352 			}
1353 		}
1354 	} else {
1355 		struct xilinx_axidma_tx_segment *segment;
1356 		struct xilinx_axidma_desc_hw *hw;
1357 
1358 		segment = list_first_entry(&head_desc->segments,
1359 					   struct xilinx_axidma_tx_segment,
1360 					   node);
1361 		hw = &segment->hw;
1362 
1363 		xilinx_write(chan, XILINX_DMA_REG_SRCDSTADDR, hw->buf_addr);
1364 
1365 		/* Start the transfer */
1366 		dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
1367 			       hw->control & chan->xdev->max_buffer_len);
1368 	}
1369 
1370 	list_splice_tail_init(&chan->pending_list, &chan->active_list);
1371 	chan->desc_pendingcount = 0;
1372 	chan->idle = false;
1373 }
1374 
1375 /**
1376  * xilinx_dma_issue_pending - Issue pending transactions
1377  * @dchan: DMA channel
1378  */
1379 static void xilinx_dma_issue_pending(struct dma_chan *dchan)
1380 {
1381 	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1382 	unsigned long flags;
1383 
1384 	spin_lock_irqsave(&chan->lock, flags);
1385 	chan->start_transfer(chan);
1386 	spin_unlock_irqrestore(&chan->lock, flags);
1387 }
1388 
1389 /**
1390  * xilinx_dma_complete_descriptor - Mark the active descriptor as complete
1391  * @chan : xilinx DMA channel
1392  *
1393  * CONTEXT: hardirq
1394  */
1395 static void xilinx_dma_complete_descriptor(struct xilinx_dma_chan *chan)
1396 {
1397 	struct xilinx_dma_tx_descriptor *desc, *next;
1398 
1399 	/* This function was invoked with lock held */
1400 	if (list_empty(&chan->active_list))
1401 		return;
1402 
1403 	list_for_each_entry_safe(desc, next, &chan->active_list, node) {
1404 		list_del(&desc->node);
1405 		if (!desc->cyclic)
1406 			dma_cookie_complete(&desc->async_tx);
1407 		list_add_tail(&desc->node, &chan->done_list);
1408 	}
1409 }
1410 
1411 /**
1412  * xilinx_dma_reset - Reset DMA channel
1413  * @chan: Driver specific DMA channel
1414  *
1415  * Return: '0' on success and failure value on error
1416  */
1417 static int xilinx_dma_reset(struct xilinx_dma_chan *chan)
1418 {
1419 	int err;
1420 	u32 tmp;
1421 
1422 	dma_ctrl_set(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RESET);
1423 
1424 	/* Wait for the hardware to finish reset */
1425 	err = xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMACR, tmp,
1426 				      !(tmp & XILINX_DMA_DMACR_RESET), 0,
1427 				      XILINX_DMA_LOOP_COUNT);
1428 
1429 	if (err) {
1430 		dev_err(chan->dev, "reset timeout, cr %x, sr %x\n",
1431 			dma_ctrl_read(chan, XILINX_DMA_REG_DMACR),
1432 			dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
1433 		return -ETIMEDOUT;
1434 	}
1435 
1436 	chan->err = false;
1437 	chan->idle = true;
1438 	chan->desc_submitcount = 0;
1439 
1440 	return err;
1441 }
1442 
1443 /**
1444  * xilinx_dma_chan_reset - Reset DMA channel and enable interrupts
1445  * @chan: Driver specific DMA channel
1446  *
1447  * Return: '0' on success and failure value on error
1448  */
1449 static int xilinx_dma_chan_reset(struct xilinx_dma_chan *chan)
1450 {
1451 	int err;
1452 
1453 	/* Reset VDMA */
1454 	err = xilinx_dma_reset(chan);
1455 	if (err)
1456 		return err;
1457 
1458 	/* Enable interrupts */
1459 	dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
1460 		      XILINX_DMA_DMAXR_ALL_IRQ_MASK);
1461 
1462 	return 0;
1463 }
1464 
1465 /**
1466  * xilinx_dma_irq_handler - DMA Interrupt handler
1467  * @irq: IRQ number
1468  * @data: Pointer to the Xilinx DMA channel structure
1469  *
1470  * Return: IRQ_HANDLED/IRQ_NONE
1471  */
1472 static irqreturn_t xilinx_dma_irq_handler(int irq, void *data)
1473 {
1474 	struct xilinx_dma_chan *chan = data;
1475 	u32 status;
1476 
1477 	/* Read the status and ack the interrupts. */
1478 	status = dma_ctrl_read(chan, XILINX_DMA_REG_DMASR);
1479 	if (!(status & XILINX_DMA_DMAXR_ALL_IRQ_MASK))
1480 		return IRQ_NONE;
1481 
1482 	dma_ctrl_write(chan, XILINX_DMA_REG_DMASR,
1483 			status & XILINX_DMA_DMAXR_ALL_IRQ_MASK);
1484 
1485 	if (status & XILINX_DMA_DMASR_ERR_IRQ) {
1486 		/*
1487 		 * An error occurred. If C_FLUSH_ON_FSYNC is enabled and the
1488 		 * error is recoverable, ignore it. Otherwise flag the error.
1489 		 *
1490 		 * Only recoverable errors can be cleared in the DMASR register,
1491 		 * make sure not to write to other error bits to 1.
1492 		 */
1493 		u32 errors = status & XILINX_DMA_DMASR_ALL_ERR_MASK;
1494 
1495 		dma_ctrl_write(chan, XILINX_DMA_REG_DMASR,
1496 				errors & XILINX_DMA_DMASR_ERR_RECOVER_MASK);
1497 
1498 		if (!chan->flush_on_fsync ||
1499 		    (errors & ~XILINX_DMA_DMASR_ERR_RECOVER_MASK)) {
1500 			dev_err(chan->dev,
1501 				"Channel %p has errors %x, cdr %x tdr %x\n",
1502 				chan, errors,
1503 				dma_ctrl_read(chan, XILINX_DMA_REG_CURDESC),
1504 				dma_ctrl_read(chan, XILINX_DMA_REG_TAILDESC));
1505 			chan->err = true;
1506 		}
1507 	}
1508 
1509 	if (status & XILINX_DMA_DMASR_DLY_CNT_IRQ) {
1510 		/*
1511 		 * Device takes too long to do the transfer when user requires
1512 		 * responsiveness.
1513 		 */
1514 		dev_dbg(chan->dev, "Inter-packet latency too long\n");
1515 	}
1516 
1517 	if (status & XILINX_DMA_DMASR_FRM_CNT_IRQ) {
1518 		spin_lock(&chan->lock);
1519 		xilinx_dma_complete_descriptor(chan);
1520 		chan->idle = true;
1521 		chan->start_transfer(chan);
1522 		spin_unlock(&chan->lock);
1523 	}
1524 
1525 	tasklet_schedule(&chan->tasklet);
1526 	return IRQ_HANDLED;
1527 }
1528 
1529 /**
1530  * append_desc_queue - Queuing descriptor
1531  * @chan: Driver specific dma channel
1532  * @desc: dma transaction descriptor
1533  */
1534 static void append_desc_queue(struct xilinx_dma_chan *chan,
1535 			      struct xilinx_dma_tx_descriptor *desc)
1536 {
1537 	struct xilinx_vdma_tx_segment *tail_segment;
1538 	struct xilinx_dma_tx_descriptor *tail_desc;
1539 	struct xilinx_axidma_tx_segment *axidma_tail_segment;
1540 	struct xilinx_cdma_tx_segment *cdma_tail_segment;
1541 
1542 	if (list_empty(&chan->pending_list))
1543 		goto append;
1544 
1545 	/*
1546 	 * Add the hardware descriptor to the chain of hardware descriptors
1547 	 * that already exists in memory.
1548 	 */
1549 	tail_desc = list_last_entry(&chan->pending_list,
1550 				    struct xilinx_dma_tx_descriptor, node);
1551 	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
1552 		tail_segment = list_last_entry(&tail_desc->segments,
1553 					       struct xilinx_vdma_tx_segment,
1554 					       node);
1555 		tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
1556 	} else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
1557 		cdma_tail_segment = list_last_entry(&tail_desc->segments,
1558 						struct xilinx_cdma_tx_segment,
1559 						node);
1560 		cdma_tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
1561 	} else {
1562 		axidma_tail_segment = list_last_entry(&tail_desc->segments,
1563 					       struct xilinx_axidma_tx_segment,
1564 					       node);
1565 		axidma_tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
1566 	}
1567 
1568 	/*
1569 	 * Add the software descriptor and all children to the list
1570 	 * of pending transactions
1571 	 */
1572 append:
1573 	list_add_tail(&desc->node, &chan->pending_list);
1574 	chan->desc_pendingcount++;
1575 
1576 	if (chan->has_sg && (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA)
1577 	    && unlikely(chan->desc_pendingcount > chan->num_frms)) {
1578 		dev_dbg(chan->dev, "desc pendingcount is too high\n");
1579 		chan->desc_pendingcount = chan->num_frms;
1580 	}
1581 }
1582 
1583 /**
1584  * xilinx_dma_tx_submit - Submit DMA transaction
1585  * @tx: Async transaction descriptor
1586  *
1587  * Return: cookie value on success and failure value on error
1588  */
1589 static dma_cookie_t xilinx_dma_tx_submit(struct dma_async_tx_descriptor *tx)
1590 {
1591 	struct xilinx_dma_tx_descriptor *desc = to_dma_tx_descriptor(tx);
1592 	struct xilinx_dma_chan *chan = to_xilinx_chan(tx->chan);
1593 	dma_cookie_t cookie;
1594 	unsigned long flags;
1595 	int err;
1596 
1597 	if (chan->cyclic) {
1598 		xilinx_dma_free_tx_descriptor(chan, desc);
1599 		return -EBUSY;
1600 	}
1601 
1602 	if (chan->err) {
1603 		/*
1604 		 * If reset fails, need to hard reset the system.
1605 		 * Channel is no longer functional
1606 		 */
1607 		err = xilinx_dma_chan_reset(chan);
1608 		if (err < 0)
1609 			return err;
1610 	}
1611 
1612 	spin_lock_irqsave(&chan->lock, flags);
1613 
1614 	cookie = dma_cookie_assign(tx);
1615 
1616 	/* Put this transaction onto the tail of the pending queue */
1617 	append_desc_queue(chan, desc);
1618 
1619 	if (desc->cyclic)
1620 		chan->cyclic = true;
1621 
1622 	spin_unlock_irqrestore(&chan->lock, flags);
1623 
1624 	return cookie;
1625 }
1626 
1627 /**
1628  * xilinx_vdma_dma_prep_interleaved - prepare a descriptor for a
1629  *	DMA_SLAVE transaction
1630  * @dchan: DMA channel
1631  * @xt: Interleaved template pointer
1632  * @flags: transfer ack flags
1633  *
1634  * Return: Async transaction descriptor on success and NULL on failure
1635  */
1636 static struct dma_async_tx_descriptor *
1637 xilinx_vdma_dma_prep_interleaved(struct dma_chan *dchan,
1638 				 struct dma_interleaved_template *xt,
1639 				 unsigned long flags)
1640 {
1641 	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1642 	struct xilinx_dma_tx_descriptor *desc;
1643 	struct xilinx_vdma_tx_segment *segment;
1644 	struct xilinx_vdma_desc_hw *hw;
1645 
1646 	if (!is_slave_direction(xt->dir))
1647 		return NULL;
1648 
1649 	if (!xt->numf || !xt->sgl[0].size)
1650 		return NULL;
1651 
1652 	if (xt->frame_size != 1)
1653 		return NULL;
1654 
1655 	/* Allocate a transaction descriptor. */
1656 	desc = xilinx_dma_alloc_tx_descriptor(chan);
1657 	if (!desc)
1658 		return NULL;
1659 
1660 	dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
1661 	desc->async_tx.tx_submit = xilinx_dma_tx_submit;
1662 	async_tx_ack(&desc->async_tx);
1663 
1664 	/* Allocate the link descriptor from DMA pool */
1665 	segment = xilinx_vdma_alloc_tx_segment(chan);
1666 	if (!segment)
1667 		goto error;
1668 
1669 	/* Fill in the hardware descriptor */
1670 	hw = &segment->hw;
1671 	hw->vsize = xt->numf;
1672 	hw->hsize = xt->sgl[0].size;
1673 	hw->stride = (xt->sgl[0].icg + xt->sgl[0].size) <<
1674 			XILINX_DMA_FRMDLY_STRIDE_STRIDE_SHIFT;
1675 	hw->stride |= chan->config.frm_dly <<
1676 			XILINX_DMA_FRMDLY_STRIDE_FRMDLY_SHIFT;
1677 
1678 	if (xt->dir != DMA_MEM_TO_DEV) {
1679 		if (chan->ext_addr) {
1680 			hw->buf_addr = lower_32_bits(xt->dst_start);
1681 			hw->buf_addr_msb = upper_32_bits(xt->dst_start);
1682 		} else {
1683 			hw->buf_addr = xt->dst_start;
1684 		}
1685 	} else {
1686 		if (chan->ext_addr) {
1687 			hw->buf_addr = lower_32_bits(xt->src_start);
1688 			hw->buf_addr_msb = upper_32_bits(xt->src_start);
1689 		} else {
1690 			hw->buf_addr = xt->src_start;
1691 		}
1692 	}
1693 
1694 	/* Insert the segment into the descriptor segments list. */
1695 	list_add_tail(&segment->node, &desc->segments);
1696 
1697 	/* Link the last hardware descriptor with the first. */
1698 	segment = list_first_entry(&desc->segments,
1699 				   struct xilinx_vdma_tx_segment, node);
1700 	desc->async_tx.phys = segment->phys;
1701 
1702 	return &desc->async_tx;
1703 
1704 error:
1705 	xilinx_dma_free_tx_descriptor(chan, desc);
1706 	return NULL;
1707 }
1708 
1709 /**
1710  * xilinx_cdma_prep_memcpy - prepare descriptors for a memcpy transaction
1711  * @dchan: DMA channel
1712  * @dma_dst: destination address
1713  * @dma_src: source address
1714  * @len: transfer length
1715  * @flags: transfer ack flags
1716  *
1717  * Return: Async transaction descriptor on success and NULL on failure
1718  */
1719 static struct dma_async_tx_descriptor *
1720 xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
1721 			dma_addr_t dma_src, size_t len, unsigned long flags)
1722 {
1723 	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1724 	struct xilinx_dma_tx_descriptor *desc;
1725 	struct xilinx_cdma_tx_segment *segment;
1726 	struct xilinx_cdma_desc_hw *hw;
1727 
1728 	if (!len || len > chan->xdev->max_buffer_len)
1729 		return NULL;
1730 
1731 	desc = xilinx_dma_alloc_tx_descriptor(chan);
1732 	if (!desc)
1733 		return NULL;
1734 
1735 	dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
1736 	desc->async_tx.tx_submit = xilinx_dma_tx_submit;
1737 
1738 	/* Allocate the link descriptor from DMA pool */
1739 	segment = xilinx_cdma_alloc_tx_segment(chan);
1740 	if (!segment)
1741 		goto error;
1742 
1743 	hw = &segment->hw;
1744 	hw->control = len;
1745 	hw->src_addr = dma_src;
1746 	hw->dest_addr = dma_dst;
1747 	if (chan->ext_addr) {
1748 		hw->src_addr_msb = upper_32_bits(dma_src);
1749 		hw->dest_addr_msb = upper_32_bits(dma_dst);
1750 	}
1751 
1752 	/* Insert the segment into the descriptor segments list. */
1753 	list_add_tail(&segment->node, &desc->segments);
1754 
1755 	desc->async_tx.phys = segment->phys;
1756 	hw->next_desc = segment->phys;
1757 
1758 	return &desc->async_tx;
1759 
1760 error:
1761 	xilinx_dma_free_tx_descriptor(chan, desc);
1762 	return NULL;
1763 }
1764 
1765 /**
1766  * xilinx_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
1767  * @dchan: DMA channel
1768  * @sgl: scatterlist to transfer to/from
1769  * @sg_len: number of entries in @scatterlist
1770  * @direction: DMA direction
1771  * @flags: transfer ack flags
1772  * @context: APP words of the descriptor
1773  *
1774  * Return: Async transaction descriptor on success and NULL on failure
1775  */
1776 static struct dma_async_tx_descriptor *xilinx_dma_prep_slave_sg(
1777 	struct dma_chan *dchan, struct scatterlist *sgl, unsigned int sg_len,
1778 	enum dma_transfer_direction direction, unsigned long flags,
1779 	void *context)
1780 {
1781 	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1782 	struct xilinx_dma_tx_descriptor *desc;
1783 	struct xilinx_axidma_tx_segment *segment = NULL;
1784 	u32 *app_w = (u32 *)context;
1785 	struct scatterlist *sg;
1786 	size_t copy;
1787 	size_t sg_used;
1788 	unsigned int i;
1789 
1790 	if (!is_slave_direction(direction))
1791 		return NULL;
1792 
1793 	/* Allocate a transaction descriptor. */
1794 	desc = xilinx_dma_alloc_tx_descriptor(chan);
1795 	if (!desc)
1796 		return NULL;
1797 
1798 	dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
1799 	desc->async_tx.tx_submit = xilinx_dma_tx_submit;
1800 
1801 	/* Build transactions using information in the scatter gather list */
1802 	for_each_sg(sgl, sg, sg_len, i) {
1803 		sg_used = 0;
1804 
1805 		/* Loop until the entire scatterlist entry is used */
1806 		while (sg_used < sg_dma_len(sg)) {
1807 			struct xilinx_axidma_desc_hw *hw;
1808 
1809 			/* Get a free segment */
1810 			segment = xilinx_axidma_alloc_tx_segment(chan);
1811 			if (!segment)
1812 				goto error;
1813 
1814 			/*
1815 			 * Calculate the maximum number of bytes to transfer,
1816 			 * making sure it is less than the hw limit
1817 			 */
1818 			copy = xilinx_dma_calc_copysize(chan, sg_dma_len(sg),
1819 							sg_used);
1820 			hw = &segment->hw;
1821 
1822 			/* Fill in the descriptor */
1823 			xilinx_axidma_buf(chan, hw, sg_dma_address(sg),
1824 					  sg_used, 0);
1825 
1826 			hw->control = copy;
1827 
1828 			if (chan->direction == DMA_MEM_TO_DEV) {
1829 				if (app_w)
1830 					memcpy(hw->app, app_w, sizeof(u32) *
1831 					       XILINX_DMA_NUM_APP_WORDS);
1832 			}
1833 
1834 			sg_used += copy;
1835 
1836 			/*
1837 			 * Insert the segment into the descriptor segments
1838 			 * list.
1839 			 */
1840 			list_add_tail(&segment->node, &desc->segments);
1841 		}
1842 	}
1843 
1844 	segment = list_first_entry(&desc->segments,
1845 				   struct xilinx_axidma_tx_segment, node);
1846 	desc->async_tx.phys = segment->phys;
1847 
1848 	/* For the last DMA_MEM_TO_DEV transfer, set EOP */
1849 	if (chan->direction == DMA_MEM_TO_DEV) {
1850 		segment->hw.control |= XILINX_DMA_BD_SOP;
1851 		segment = list_last_entry(&desc->segments,
1852 					  struct xilinx_axidma_tx_segment,
1853 					  node);
1854 		segment->hw.control |= XILINX_DMA_BD_EOP;
1855 	}
1856 
1857 	return &desc->async_tx;
1858 
1859 error:
1860 	xilinx_dma_free_tx_descriptor(chan, desc);
1861 	return NULL;
1862 }
1863 
1864 /**
1865  * xilinx_dma_prep_dma_cyclic - prepare descriptors for a DMA_SLAVE transaction
1866  * @dchan: DMA channel
1867  * @buf_addr: Physical address of the buffer
1868  * @buf_len: Total length of the cyclic buffers
1869  * @period_len: length of individual cyclic buffer
1870  * @direction: DMA direction
1871  * @flags: transfer ack flags
1872  *
1873  * Return: Async transaction descriptor on success and NULL on failure
1874  */
1875 static struct dma_async_tx_descriptor *xilinx_dma_prep_dma_cyclic(
1876 	struct dma_chan *dchan, dma_addr_t buf_addr, size_t buf_len,
1877 	size_t period_len, enum dma_transfer_direction direction,
1878 	unsigned long flags)
1879 {
1880 	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1881 	struct xilinx_dma_tx_descriptor *desc;
1882 	struct xilinx_axidma_tx_segment *segment, *head_segment, *prev = NULL;
1883 	size_t copy, sg_used;
1884 	unsigned int num_periods;
1885 	int i;
1886 	u32 reg;
1887 
1888 	if (!period_len)
1889 		return NULL;
1890 
1891 	num_periods = buf_len / period_len;
1892 
1893 	if (!num_periods)
1894 		return NULL;
1895 
1896 	if (!is_slave_direction(direction))
1897 		return NULL;
1898 
1899 	/* Allocate a transaction descriptor. */
1900 	desc = xilinx_dma_alloc_tx_descriptor(chan);
1901 	if (!desc)
1902 		return NULL;
1903 
1904 	chan->direction = direction;
1905 	dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
1906 	desc->async_tx.tx_submit = xilinx_dma_tx_submit;
1907 
1908 	for (i = 0; i < num_periods; ++i) {
1909 		sg_used = 0;
1910 
1911 		while (sg_used < period_len) {
1912 			struct xilinx_axidma_desc_hw *hw;
1913 
1914 			/* Get a free segment */
1915 			segment = xilinx_axidma_alloc_tx_segment(chan);
1916 			if (!segment)
1917 				goto error;
1918 
1919 			/*
1920 			 * Calculate the maximum number of bytes to transfer,
1921 			 * making sure it is less than the hw limit
1922 			 */
1923 			copy = xilinx_dma_calc_copysize(chan, period_len,
1924 							sg_used);
1925 			hw = &segment->hw;
1926 			xilinx_axidma_buf(chan, hw, buf_addr, sg_used,
1927 					  period_len * i);
1928 			hw->control = copy;
1929 
1930 			if (prev)
1931 				prev->hw.next_desc = segment->phys;
1932 
1933 			prev = segment;
1934 			sg_used += copy;
1935 
1936 			/*
1937 			 * Insert the segment into the descriptor segments
1938 			 * list.
1939 			 */
1940 			list_add_tail(&segment->node, &desc->segments);
1941 		}
1942 	}
1943 
1944 	head_segment = list_first_entry(&desc->segments,
1945 				   struct xilinx_axidma_tx_segment, node);
1946 	desc->async_tx.phys = head_segment->phys;
1947 
1948 	desc->cyclic = true;
1949 	reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
1950 	reg |= XILINX_DMA_CR_CYCLIC_BD_EN_MASK;
1951 	dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
1952 
1953 	segment = list_last_entry(&desc->segments,
1954 				  struct xilinx_axidma_tx_segment,
1955 				  node);
1956 	segment->hw.next_desc = (u32) head_segment->phys;
1957 
1958 	/* For the last DMA_MEM_TO_DEV transfer, set EOP */
1959 	if (direction == DMA_MEM_TO_DEV) {
1960 		head_segment->hw.control |= XILINX_DMA_BD_SOP;
1961 		segment->hw.control |= XILINX_DMA_BD_EOP;
1962 	}
1963 
1964 	return &desc->async_tx;
1965 
1966 error:
1967 	xilinx_dma_free_tx_descriptor(chan, desc);
1968 	return NULL;
1969 }
1970 
1971 /**
1972  * xilinx_dma_prep_interleaved - prepare a descriptor for a
1973  *	DMA_SLAVE transaction
1974  * @dchan: DMA channel
1975  * @xt: Interleaved template pointer
1976  * @flags: transfer ack flags
1977  *
1978  * Return: Async transaction descriptor on success and NULL on failure
1979  */
1980 static struct dma_async_tx_descriptor *
1981 xilinx_dma_prep_interleaved(struct dma_chan *dchan,
1982 				 struct dma_interleaved_template *xt,
1983 				 unsigned long flags)
1984 {
1985 	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1986 	struct xilinx_dma_tx_descriptor *desc;
1987 	struct xilinx_axidma_tx_segment *segment;
1988 	struct xilinx_axidma_desc_hw *hw;
1989 
1990 	if (!is_slave_direction(xt->dir))
1991 		return NULL;
1992 
1993 	if (!xt->numf || !xt->sgl[0].size)
1994 		return NULL;
1995 
1996 	if (xt->frame_size != 1)
1997 		return NULL;
1998 
1999 	/* Allocate a transaction descriptor. */
2000 	desc = xilinx_dma_alloc_tx_descriptor(chan);
2001 	if (!desc)
2002 		return NULL;
2003 
2004 	chan->direction = xt->dir;
2005 	dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
2006 	desc->async_tx.tx_submit = xilinx_dma_tx_submit;
2007 
2008 	/* Get a free segment */
2009 	segment = xilinx_axidma_alloc_tx_segment(chan);
2010 	if (!segment)
2011 		goto error;
2012 
2013 	hw = &segment->hw;
2014 
2015 	/* Fill in the descriptor */
2016 	if (xt->dir != DMA_MEM_TO_DEV)
2017 		hw->buf_addr = xt->dst_start;
2018 	else
2019 		hw->buf_addr = xt->src_start;
2020 
2021 	hw->mcdma_control = chan->tdest & XILINX_DMA_BD_TDEST_MASK;
2022 	hw->vsize_stride = (xt->numf << XILINX_DMA_BD_VSIZE_SHIFT) &
2023 			    XILINX_DMA_BD_VSIZE_MASK;
2024 	hw->vsize_stride |= (xt->sgl[0].icg + xt->sgl[0].size) &
2025 			    XILINX_DMA_BD_STRIDE_MASK;
2026 	hw->control = xt->sgl[0].size & XILINX_DMA_BD_HSIZE_MASK;
2027 
2028 	/*
2029 	 * Insert the segment into the descriptor segments
2030 	 * list.
2031 	 */
2032 	list_add_tail(&segment->node, &desc->segments);
2033 
2034 
2035 	segment = list_first_entry(&desc->segments,
2036 				   struct xilinx_axidma_tx_segment, node);
2037 	desc->async_tx.phys = segment->phys;
2038 
2039 	/* For the last DMA_MEM_TO_DEV transfer, set EOP */
2040 	if (xt->dir == DMA_MEM_TO_DEV) {
2041 		segment->hw.control |= XILINX_DMA_BD_SOP;
2042 		segment = list_last_entry(&desc->segments,
2043 					  struct xilinx_axidma_tx_segment,
2044 					  node);
2045 		segment->hw.control |= XILINX_DMA_BD_EOP;
2046 	}
2047 
2048 	return &desc->async_tx;
2049 
2050 error:
2051 	xilinx_dma_free_tx_descriptor(chan, desc);
2052 	return NULL;
2053 }
2054 
2055 /**
2056  * xilinx_dma_terminate_all - Halt the channel and free descriptors
2057  * @dchan: Driver specific DMA Channel pointer
2058  *
2059  * Return: '0' always.
2060  */
2061 static int xilinx_dma_terminate_all(struct dma_chan *dchan)
2062 {
2063 	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2064 	u32 reg;
2065 	int err;
2066 
2067 	if (chan->cyclic)
2068 		xilinx_dma_chan_reset(chan);
2069 
2070 	err = chan->stop_transfer(chan);
2071 	if (err) {
2072 		dev_err(chan->dev, "Cannot stop channel %p: %x\n",
2073 			chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
2074 		chan->err = true;
2075 	}
2076 
2077 	/* Remove and free all of the descriptors in the lists */
2078 	xilinx_dma_free_descriptors(chan);
2079 	chan->idle = true;
2080 
2081 	if (chan->cyclic) {
2082 		reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
2083 		reg &= ~XILINX_DMA_CR_CYCLIC_BD_EN_MASK;
2084 		dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
2085 		chan->cyclic = false;
2086 	}
2087 
2088 	if ((chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
2089 		dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
2090 			     XILINX_CDMA_CR_SGMODE);
2091 
2092 	return 0;
2093 }
2094 
2095 /**
2096  * xilinx_dma_channel_set_config - Configure VDMA channel
2097  * Run-time configuration for Axi VDMA, supports:
2098  * . halt the channel
2099  * . configure interrupt coalescing and inter-packet delay threshold
2100  * . start/stop parking
2101  * . enable genlock
2102  *
2103  * @dchan: DMA channel
2104  * @cfg: VDMA device configuration pointer
2105  *
2106  * Return: '0' on success and failure value on error
2107  */
2108 int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
2109 					struct xilinx_vdma_config *cfg)
2110 {
2111 	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2112 	u32 dmacr;
2113 
2114 	if (cfg->reset)
2115 		return xilinx_dma_chan_reset(chan);
2116 
2117 	dmacr = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
2118 
2119 	chan->config.frm_dly = cfg->frm_dly;
2120 	chan->config.park = cfg->park;
2121 
2122 	/* genlock settings */
2123 	chan->config.gen_lock = cfg->gen_lock;
2124 	chan->config.master = cfg->master;
2125 
2126 	if (cfg->gen_lock && chan->genlock) {
2127 		dmacr |= XILINX_DMA_DMACR_GENLOCK_EN;
2128 		dmacr |= cfg->master << XILINX_DMA_DMACR_MASTER_SHIFT;
2129 	}
2130 
2131 	chan->config.frm_cnt_en = cfg->frm_cnt_en;
2132 	chan->config.vflip_en = cfg->vflip_en;
2133 
2134 	if (cfg->park)
2135 		chan->config.park_frm = cfg->park_frm;
2136 	else
2137 		chan->config.park_frm = -1;
2138 
2139 	chan->config.coalesc = cfg->coalesc;
2140 	chan->config.delay = cfg->delay;
2141 
2142 	if (cfg->coalesc <= XILINX_DMA_DMACR_FRAME_COUNT_MAX) {
2143 		dmacr |= cfg->coalesc << XILINX_DMA_DMACR_FRAME_COUNT_SHIFT;
2144 		chan->config.coalesc = cfg->coalesc;
2145 	}
2146 
2147 	if (cfg->delay <= XILINX_DMA_DMACR_DELAY_MAX) {
2148 		dmacr |= cfg->delay << XILINX_DMA_DMACR_DELAY_SHIFT;
2149 		chan->config.delay = cfg->delay;
2150 	}
2151 
2152 	/* FSync Source selection */
2153 	dmacr &= ~XILINX_DMA_DMACR_FSYNCSRC_MASK;
2154 	dmacr |= cfg->ext_fsync << XILINX_DMA_DMACR_FSYNCSRC_SHIFT;
2155 
2156 	dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, dmacr);
2157 
2158 	return 0;
2159 }
2160 EXPORT_SYMBOL(xilinx_vdma_channel_set_config);
2161 
2162 /* -----------------------------------------------------------------------------
2163  * Probe and remove
2164  */
2165 
2166 /**
2167  * xilinx_dma_chan_remove - Per Channel remove function
2168  * @chan: Driver specific DMA channel
2169  */
2170 static void xilinx_dma_chan_remove(struct xilinx_dma_chan *chan)
2171 {
2172 	/* Disable all interrupts */
2173 	dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
2174 		      XILINX_DMA_DMAXR_ALL_IRQ_MASK);
2175 
2176 	if (chan->irq > 0)
2177 		free_irq(chan->irq, chan);
2178 
2179 	tasklet_kill(&chan->tasklet);
2180 
2181 	list_del(&chan->common.device_node);
2182 }
2183 
2184 static int axidma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
2185 			    struct clk **tx_clk, struct clk **rx_clk,
2186 			    struct clk **sg_clk, struct clk **tmp_clk)
2187 {
2188 	int err;
2189 
2190 	*tmp_clk = NULL;
2191 
2192 	*axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
2193 	if (IS_ERR(*axi_clk)) {
2194 		err = PTR_ERR(*axi_clk);
2195 		dev_err(&pdev->dev, "failed to get axi_aclk (%d)\n", err);
2196 		return err;
2197 	}
2198 
2199 	*tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
2200 	if (IS_ERR(*tx_clk))
2201 		*tx_clk = NULL;
2202 
2203 	*rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
2204 	if (IS_ERR(*rx_clk))
2205 		*rx_clk = NULL;
2206 
2207 	*sg_clk = devm_clk_get(&pdev->dev, "m_axi_sg_aclk");
2208 	if (IS_ERR(*sg_clk))
2209 		*sg_clk = NULL;
2210 
2211 	err = clk_prepare_enable(*axi_clk);
2212 	if (err) {
2213 		dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", err);
2214 		return err;
2215 	}
2216 
2217 	err = clk_prepare_enable(*tx_clk);
2218 	if (err) {
2219 		dev_err(&pdev->dev, "failed to enable tx_clk (%d)\n", err);
2220 		goto err_disable_axiclk;
2221 	}
2222 
2223 	err = clk_prepare_enable(*rx_clk);
2224 	if (err) {
2225 		dev_err(&pdev->dev, "failed to enable rx_clk (%d)\n", err);
2226 		goto err_disable_txclk;
2227 	}
2228 
2229 	err = clk_prepare_enable(*sg_clk);
2230 	if (err) {
2231 		dev_err(&pdev->dev, "failed to enable sg_clk (%d)\n", err);
2232 		goto err_disable_rxclk;
2233 	}
2234 
2235 	return 0;
2236 
2237 err_disable_rxclk:
2238 	clk_disable_unprepare(*rx_clk);
2239 err_disable_txclk:
2240 	clk_disable_unprepare(*tx_clk);
2241 err_disable_axiclk:
2242 	clk_disable_unprepare(*axi_clk);
2243 
2244 	return err;
2245 }
2246 
2247 static int axicdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
2248 			    struct clk **dev_clk, struct clk **tmp_clk,
2249 			    struct clk **tmp1_clk, struct clk **tmp2_clk)
2250 {
2251 	int err;
2252 
2253 	*tmp_clk = NULL;
2254 	*tmp1_clk = NULL;
2255 	*tmp2_clk = NULL;
2256 
2257 	*axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
2258 	if (IS_ERR(*axi_clk)) {
2259 		err = PTR_ERR(*axi_clk);
2260 		dev_err(&pdev->dev, "failed to get axi_clk (%d)\n", err);
2261 		return err;
2262 	}
2263 
2264 	*dev_clk = devm_clk_get(&pdev->dev, "m_axi_aclk");
2265 	if (IS_ERR(*dev_clk)) {
2266 		err = PTR_ERR(*dev_clk);
2267 		dev_err(&pdev->dev, "failed to get dev_clk (%d)\n", err);
2268 		return err;
2269 	}
2270 
2271 	err = clk_prepare_enable(*axi_clk);
2272 	if (err) {
2273 		dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", err);
2274 		return err;
2275 	}
2276 
2277 	err = clk_prepare_enable(*dev_clk);
2278 	if (err) {
2279 		dev_err(&pdev->dev, "failed to enable dev_clk (%d)\n", err);
2280 		goto err_disable_axiclk;
2281 	}
2282 
2283 	return 0;
2284 
2285 err_disable_axiclk:
2286 	clk_disable_unprepare(*axi_clk);
2287 
2288 	return err;
2289 }
2290 
2291 static int axivdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
2292 			    struct clk **tx_clk, struct clk **txs_clk,
2293 			    struct clk **rx_clk, struct clk **rxs_clk)
2294 {
2295 	int err;
2296 
2297 	*axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
2298 	if (IS_ERR(*axi_clk)) {
2299 		err = PTR_ERR(*axi_clk);
2300 		dev_err(&pdev->dev, "failed to get axi_aclk (%d)\n", err);
2301 		return err;
2302 	}
2303 
2304 	*tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
2305 	if (IS_ERR(*tx_clk))
2306 		*tx_clk = NULL;
2307 
2308 	*txs_clk = devm_clk_get(&pdev->dev, "m_axis_mm2s_aclk");
2309 	if (IS_ERR(*txs_clk))
2310 		*txs_clk = NULL;
2311 
2312 	*rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
2313 	if (IS_ERR(*rx_clk))
2314 		*rx_clk = NULL;
2315 
2316 	*rxs_clk = devm_clk_get(&pdev->dev, "s_axis_s2mm_aclk");
2317 	if (IS_ERR(*rxs_clk))
2318 		*rxs_clk = NULL;
2319 
2320 	err = clk_prepare_enable(*axi_clk);
2321 	if (err) {
2322 		dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", err);
2323 		return err;
2324 	}
2325 
2326 	err = clk_prepare_enable(*tx_clk);
2327 	if (err) {
2328 		dev_err(&pdev->dev, "failed to enable tx_clk (%d)\n", err);
2329 		goto err_disable_axiclk;
2330 	}
2331 
2332 	err = clk_prepare_enable(*txs_clk);
2333 	if (err) {
2334 		dev_err(&pdev->dev, "failed to enable txs_clk (%d)\n", err);
2335 		goto err_disable_txclk;
2336 	}
2337 
2338 	err = clk_prepare_enable(*rx_clk);
2339 	if (err) {
2340 		dev_err(&pdev->dev, "failed to enable rx_clk (%d)\n", err);
2341 		goto err_disable_txsclk;
2342 	}
2343 
2344 	err = clk_prepare_enable(*rxs_clk);
2345 	if (err) {
2346 		dev_err(&pdev->dev, "failed to enable rxs_clk (%d)\n", err);
2347 		goto err_disable_rxclk;
2348 	}
2349 
2350 	return 0;
2351 
2352 err_disable_rxclk:
2353 	clk_disable_unprepare(*rx_clk);
2354 err_disable_txsclk:
2355 	clk_disable_unprepare(*txs_clk);
2356 err_disable_txclk:
2357 	clk_disable_unprepare(*tx_clk);
2358 err_disable_axiclk:
2359 	clk_disable_unprepare(*axi_clk);
2360 
2361 	return err;
2362 }
2363 
2364 static void xdma_disable_allclks(struct xilinx_dma_device *xdev)
2365 {
2366 	clk_disable_unprepare(xdev->rxs_clk);
2367 	clk_disable_unprepare(xdev->rx_clk);
2368 	clk_disable_unprepare(xdev->txs_clk);
2369 	clk_disable_unprepare(xdev->tx_clk);
2370 	clk_disable_unprepare(xdev->axi_clk);
2371 }
2372 
2373 /**
2374  * xilinx_dma_chan_probe - Per Channel Probing
2375  * It get channel features from the device tree entry and
2376  * initialize special channel handling routines
2377  *
2378  * @xdev: Driver specific device structure
2379  * @node: Device node
2380  * @chan_id: DMA Channel id
2381  *
2382  * Return: '0' on success and failure value on error
2383  */
2384 static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
2385 				  struct device_node *node, int chan_id)
2386 {
2387 	struct xilinx_dma_chan *chan;
2388 	bool has_dre = false;
2389 	u32 value, width;
2390 	int err;
2391 
2392 	/* Allocate and initialize the channel structure */
2393 	chan = devm_kzalloc(xdev->dev, sizeof(*chan), GFP_KERNEL);
2394 	if (!chan)
2395 		return -ENOMEM;
2396 
2397 	chan->dev = xdev->dev;
2398 	chan->xdev = xdev;
2399 	chan->desc_pendingcount = 0x0;
2400 	chan->ext_addr = xdev->ext_addr;
2401 	/* This variable ensures that descriptors are not
2402 	 * Submitted when dma engine is in progress. This variable is
2403 	 * Added to avoid polling for a bit in the status register to
2404 	 * Know dma state in the driver hot path.
2405 	 */
2406 	chan->idle = true;
2407 
2408 	spin_lock_init(&chan->lock);
2409 	INIT_LIST_HEAD(&chan->pending_list);
2410 	INIT_LIST_HEAD(&chan->done_list);
2411 	INIT_LIST_HEAD(&chan->active_list);
2412 	INIT_LIST_HEAD(&chan->free_seg_list);
2413 
2414 	/* Retrieve the channel properties from the device tree */
2415 	has_dre = of_property_read_bool(node, "xlnx,include-dre");
2416 
2417 	chan->genlock = of_property_read_bool(node, "xlnx,genlock-mode");
2418 
2419 	err = of_property_read_u32(node, "xlnx,datawidth", &value);
2420 	if (err) {
2421 		dev_err(xdev->dev, "missing xlnx,datawidth property\n");
2422 		return err;
2423 	}
2424 	width = value >> 3; /* Convert bits to bytes */
2425 
2426 	/* If data width is greater than 8 bytes, DRE is not in hw */
2427 	if (width > 8)
2428 		has_dre = false;
2429 
2430 	if (!has_dre)
2431 		xdev->common.copy_align = fls(width - 1);
2432 
2433 	if (of_device_is_compatible(node, "xlnx,axi-vdma-mm2s-channel") ||
2434 	    of_device_is_compatible(node, "xlnx,axi-dma-mm2s-channel") ||
2435 	    of_device_is_compatible(node, "xlnx,axi-cdma-channel")) {
2436 		chan->direction = DMA_MEM_TO_DEV;
2437 		chan->id = chan_id;
2438 		chan->tdest = chan_id;
2439 
2440 		chan->ctrl_offset = XILINX_DMA_MM2S_CTRL_OFFSET;
2441 		if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
2442 			chan->desc_offset = XILINX_VDMA_MM2S_DESC_OFFSET;
2443 			chan->config.park = 1;
2444 
2445 			if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
2446 			    xdev->flush_on_fsync == XILINX_DMA_FLUSH_MM2S)
2447 				chan->flush_on_fsync = true;
2448 		}
2449 	} else if (of_device_is_compatible(node,
2450 					   "xlnx,axi-vdma-s2mm-channel") ||
2451 		   of_device_is_compatible(node,
2452 					   "xlnx,axi-dma-s2mm-channel")) {
2453 		chan->direction = DMA_DEV_TO_MEM;
2454 		chan->id = chan_id;
2455 		chan->tdest = chan_id - xdev->nr_channels;
2456 		chan->has_vflip = of_property_read_bool(node,
2457 					"xlnx,enable-vert-flip");
2458 		if (chan->has_vflip) {
2459 			chan->config.vflip_en = dma_read(chan,
2460 				XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP) &
2461 				XILINX_VDMA_ENABLE_VERTICAL_FLIP;
2462 		}
2463 
2464 		chan->ctrl_offset = XILINX_DMA_S2MM_CTRL_OFFSET;
2465 		if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
2466 			chan->desc_offset = XILINX_VDMA_S2MM_DESC_OFFSET;
2467 			chan->config.park = 1;
2468 
2469 			if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
2470 			    xdev->flush_on_fsync == XILINX_DMA_FLUSH_S2MM)
2471 				chan->flush_on_fsync = true;
2472 		}
2473 	} else {
2474 		dev_err(xdev->dev, "Invalid channel compatible node\n");
2475 		return -EINVAL;
2476 	}
2477 
2478 	/* Request the interrupt */
2479 	chan->irq = irq_of_parse_and_map(node, 0);
2480 	err = request_irq(chan->irq, xilinx_dma_irq_handler, IRQF_SHARED,
2481 			  "xilinx-dma-controller", chan);
2482 	if (err) {
2483 		dev_err(xdev->dev, "unable to request IRQ %d\n", chan->irq);
2484 		return err;
2485 	}
2486 
2487 	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
2488 		chan->start_transfer = xilinx_dma_start_transfer;
2489 		chan->stop_transfer = xilinx_dma_stop_transfer;
2490 	} else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
2491 		chan->start_transfer = xilinx_cdma_start_transfer;
2492 		chan->stop_transfer = xilinx_cdma_stop_transfer;
2493 	} else {
2494 		chan->start_transfer = xilinx_vdma_start_transfer;
2495 		chan->stop_transfer = xilinx_dma_stop_transfer;
2496 	}
2497 
2498 	/* check if SG is enabled (only for AXIDMA and CDMA) */
2499 	if (xdev->dma_config->dmatype != XDMA_TYPE_VDMA) {
2500 		if (dma_ctrl_read(chan, XILINX_DMA_REG_DMASR) &
2501 		    XILINX_DMA_DMASR_SG_MASK)
2502 			chan->has_sg = true;
2503 		dev_dbg(chan->dev, "ch %d: SG %s\n", chan->id,
2504 			chan->has_sg ? "enabled" : "disabled");
2505 	}
2506 
2507 	/* Initialize the tasklet */
2508 	tasklet_init(&chan->tasklet, xilinx_dma_do_tasklet,
2509 			(unsigned long)chan);
2510 
2511 	/*
2512 	 * Initialize the DMA channel and add it to the DMA engine channels
2513 	 * list.
2514 	 */
2515 	chan->common.device = &xdev->common;
2516 
2517 	list_add_tail(&chan->common.device_node, &xdev->common.channels);
2518 	xdev->chan[chan->id] = chan;
2519 
2520 	/* Reset the channel */
2521 	err = xilinx_dma_chan_reset(chan);
2522 	if (err < 0) {
2523 		dev_err(xdev->dev, "Reset channel failed\n");
2524 		return err;
2525 	}
2526 
2527 	return 0;
2528 }
2529 
2530 /**
2531  * xilinx_dma_child_probe - Per child node probe
2532  * It get number of dma-channels per child node from
2533  * device-tree and initializes all the channels.
2534  *
2535  * @xdev: Driver specific device structure
2536  * @node: Device node
2537  *
2538  * Return: 0 always.
2539  */
2540 static int xilinx_dma_child_probe(struct xilinx_dma_device *xdev,
2541 				    struct device_node *node)
2542 {
2543 	int ret, i, nr_channels = 1;
2544 
2545 	ret = of_property_read_u32(node, "dma-channels", &nr_channels);
2546 	if ((ret < 0) && xdev->mcdma)
2547 		dev_warn(xdev->dev, "missing dma-channels property\n");
2548 
2549 	for (i = 0; i < nr_channels; i++)
2550 		xilinx_dma_chan_probe(xdev, node, xdev->chan_id++);
2551 
2552 	xdev->nr_channels += nr_channels;
2553 
2554 	return 0;
2555 }
2556 
2557 /**
2558  * of_dma_xilinx_xlate - Translation function
2559  * @dma_spec: Pointer to DMA specifier as found in the device tree
2560  * @ofdma: Pointer to DMA controller data
2561  *
2562  * Return: DMA channel pointer on success and NULL on error
2563  */
2564 static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
2565 						struct of_dma *ofdma)
2566 {
2567 	struct xilinx_dma_device *xdev = ofdma->of_dma_data;
2568 	int chan_id = dma_spec->args[0];
2569 
2570 	if (chan_id >= xdev->nr_channels || !xdev->chan[chan_id])
2571 		return NULL;
2572 
2573 	return dma_get_slave_channel(&xdev->chan[chan_id]->common);
2574 }
2575 
2576 static const struct xilinx_dma_config axidma_config = {
2577 	.dmatype = XDMA_TYPE_AXIDMA,
2578 	.clk_init = axidma_clk_init,
2579 };
2580 
2581 static const struct xilinx_dma_config axicdma_config = {
2582 	.dmatype = XDMA_TYPE_CDMA,
2583 	.clk_init = axicdma_clk_init,
2584 };
2585 
2586 static const struct xilinx_dma_config axivdma_config = {
2587 	.dmatype = XDMA_TYPE_VDMA,
2588 	.clk_init = axivdma_clk_init,
2589 };
2590 
2591 static const struct of_device_id xilinx_dma_of_ids[] = {
2592 	{ .compatible = "xlnx,axi-dma-1.00.a", .data = &axidma_config },
2593 	{ .compatible = "xlnx,axi-cdma-1.00.a", .data = &axicdma_config },
2594 	{ .compatible = "xlnx,axi-vdma-1.00.a", .data = &axivdma_config },
2595 	{}
2596 };
2597 MODULE_DEVICE_TABLE(of, xilinx_dma_of_ids);
2598 
2599 /**
2600  * xilinx_dma_probe - Driver probe function
2601  * @pdev: Pointer to the platform_device structure
2602  *
2603  * Return: '0' on success and failure value on error
2604  */
2605 static int xilinx_dma_probe(struct platform_device *pdev)
2606 {
2607 	int (*clk_init)(struct platform_device *, struct clk **, struct clk **,
2608 			struct clk **, struct clk **, struct clk **)
2609 					= axivdma_clk_init;
2610 	struct device_node *node = pdev->dev.of_node;
2611 	struct xilinx_dma_device *xdev;
2612 	struct device_node *child, *np = pdev->dev.of_node;
2613 	struct resource *io;
2614 	u32 num_frames, addr_width, len_width;
2615 	int i, err;
2616 
2617 	/* Allocate and initialize the DMA engine structure */
2618 	xdev = devm_kzalloc(&pdev->dev, sizeof(*xdev), GFP_KERNEL);
2619 	if (!xdev)
2620 		return -ENOMEM;
2621 
2622 	xdev->dev = &pdev->dev;
2623 	if (np) {
2624 		const struct of_device_id *match;
2625 
2626 		match = of_match_node(xilinx_dma_of_ids, np);
2627 		if (match && match->data) {
2628 			xdev->dma_config = match->data;
2629 			clk_init = xdev->dma_config->clk_init;
2630 		}
2631 	}
2632 
2633 	err = clk_init(pdev, &xdev->axi_clk, &xdev->tx_clk, &xdev->txs_clk,
2634 		       &xdev->rx_clk, &xdev->rxs_clk);
2635 	if (err)
2636 		return err;
2637 
2638 	/* Request and map I/O memory */
2639 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2640 	xdev->regs = devm_ioremap_resource(&pdev->dev, io);
2641 	if (IS_ERR(xdev->regs))
2642 		return PTR_ERR(xdev->regs);
2643 
2644 	/* Retrieve the DMA engine properties from the device tree */
2645 	xdev->max_buffer_len = GENMASK(XILINX_DMA_MAX_TRANS_LEN_MAX - 1, 0);
2646 
2647 	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
2648 		xdev->mcdma = of_property_read_bool(node, "xlnx,mcdma");
2649 		if (!of_property_read_u32(node, "xlnx,sg-length-width",
2650 					  &len_width)) {
2651 			if (len_width < XILINX_DMA_MAX_TRANS_LEN_MIN ||
2652 			    len_width > XILINX_DMA_V2_MAX_TRANS_LEN_MAX) {
2653 				dev_warn(xdev->dev,
2654 					 "invalid xlnx,sg-length-width property value. Using default width\n");
2655 			} else {
2656 				if (len_width > XILINX_DMA_MAX_TRANS_LEN_MAX)
2657 					dev_warn(xdev->dev, "Please ensure that IP supports buffer length > 23 bits\n");
2658 				xdev->max_buffer_len =
2659 					GENMASK(len_width - 1, 0);
2660 			}
2661 		}
2662 	}
2663 
2664 	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
2665 		err = of_property_read_u32(node, "xlnx,num-fstores",
2666 					   &num_frames);
2667 		if (err < 0) {
2668 			dev_err(xdev->dev,
2669 				"missing xlnx,num-fstores property\n");
2670 			return err;
2671 		}
2672 
2673 		err = of_property_read_u32(node, "xlnx,flush-fsync",
2674 					   &xdev->flush_on_fsync);
2675 		if (err < 0)
2676 			dev_warn(xdev->dev,
2677 				 "missing xlnx,flush-fsync property\n");
2678 	}
2679 
2680 	err = of_property_read_u32(node, "xlnx,addrwidth", &addr_width);
2681 	if (err < 0)
2682 		dev_warn(xdev->dev, "missing xlnx,addrwidth property\n");
2683 
2684 	if (addr_width > 32)
2685 		xdev->ext_addr = true;
2686 	else
2687 		xdev->ext_addr = false;
2688 
2689 	/* Set the dma mask bits */
2690 	dma_set_mask(xdev->dev, DMA_BIT_MASK(addr_width));
2691 
2692 	/* Initialize the DMA engine */
2693 	xdev->common.dev = &pdev->dev;
2694 
2695 	INIT_LIST_HEAD(&xdev->common.channels);
2696 	if (!(xdev->dma_config->dmatype == XDMA_TYPE_CDMA)) {
2697 		dma_cap_set(DMA_SLAVE, xdev->common.cap_mask);
2698 		dma_cap_set(DMA_PRIVATE, xdev->common.cap_mask);
2699 	}
2700 
2701 	xdev->common.device_alloc_chan_resources =
2702 				xilinx_dma_alloc_chan_resources;
2703 	xdev->common.device_free_chan_resources =
2704 				xilinx_dma_free_chan_resources;
2705 	xdev->common.device_terminate_all = xilinx_dma_terminate_all;
2706 	xdev->common.device_tx_status = xilinx_dma_tx_status;
2707 	xdev->common.device_issue_pending = xilinx_dma_issue_pending;
2708 	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
2709 		dma_cap_set(DMA_CYCLIC, xdev->common.cap_mask);
2710 		xdev->common.device_prep_slave_sg = xilinx_dma_prep_slave_sg;
2711 		xdev->common.device_prep_dma_cyclic =
2712 					  xilinx_dma_prep_dma_cyclic;
2713 		xdev->common.device_prep_interleaved_dma =
2714 					xilinx_dma_prep_interleaved;
2715 		/* Residue calculation is supported by only AXI DMA */
2716 		xdev->common.residue_granularity =
2717 					  DMA_RESIDUE_GRANULARITY_SEGMENT;
2718 	} else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
2719 		dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
2720 		xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
2721 	} else {
2722 		xdev->common.device_prep_interleaved_dma =
2723 				xilinx_vdma_dma_prep_interleaved;
2724 	}
2725 
2726 	platform_set_drvdata(pdev, xdev);
2727 
2728 	/* Initialize the channels */
2729 	for_each_child_of_node(node, child) {
2730 		err = xilinx_dma_child_probe(xdev, child);
2731 		if (err < 0)
2732 			goto disable_clks;
2733 	}
2734 
2735 	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
2736 		for (i = 0; i < xdev->nr_channels; i++)
2737 			if (xdev->chan[i])
2738 				xdev->chan[i]->num_frms = num_frames;
2739 	}
2740 
2741 	/* Register the DMA engine with the core */
2742 	dma_async_device_register(&xdev->common);
2743 
2744 	err = of_dma_controller_register(node, of_dma_xilinx_xlate,
2745 					 xdev);
2746 	if (err < 0) {
2747 		dev_err(&pdev->dev, "Unable to register DMA to DT\n");
2748 		dma_async_device_unregister(&xdev->common);
2749 		goto error;
2750 	}
2751 
2752 	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
2753 		dev_info(&pdev->dev, "Xilinx AXI DMA Engine Driver Probed!!\n");
2754 	else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA)
2755 		dev_info(&pdev->dev, "Xilinx AXI CDMA Engine Driver Probed!!\n");
2756 	else
2757 		dev_info(&pdev->dev, "Xilinx AXI VDMA Engine Driver Probed!!\n");
2758 
2759 	return 0;
2760 
2761 disable_clks:
2762 	xdma_disable_allclks(xdev);
2763 error:
2764 	for (i = 0; i < xdev->nr_channels; i++)
2765 		if (xdev->chan[i])
2766 			xilinx_dma_chan_remove(xdev->chan[i]);
2767 
2768 	return err;
2769 }
2770 
2771 /**
2772  * xilinx_dma_remove - Driver remove function
2773  * @pdev: Pointer to the platform_device structure
2774  *
2775  * Return: Always '0'
2776  */
2777 static int xilinx_dma_remove(struct platform_device *pdev)
2778 {
2779 	struct xilinx_dma_device *xdev = platform_get_drvdata(pdev);
2780 	int i;
2781 
2782 	of_dma_controller_free(pdev->dev.of_node);
2783 
2784 	dma_async_device_unregister(&xdev->common);
2785 
2786 	for (i = 0; i < xdev->nr_channels; i++)
2787 		if (xdev->chan[i])
2788 			xilinx_dma_chan_remove(xdev->chan[i]);
2789 
2790 	xdma_disable_allclks(xdev);
2791 
2792 	return 0;
2793 }
2794 
2795 static struct platform_driver xilinx_vdma_driver = {
2796 	.driver = {
2797 		.name = "xilinx-vdma",
2798 		.of_match_table = xilinx_dma_of_ids,
2799 	},
2800 	.probe = xilinx_dma_probe,
2801 	.remove = xilinx_dma_remove,
2802 };
2803 
2804 module_platform_driver(xilinx_vdma_driver);
2805 
2806 MODULE_AUTHOR("Xilinx, Inc.");
2807 MODULE_DESCRIPTION("Xilinx VDMA driver");
2808 MODULE_LICENSE("GPL v2");
2809