1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Driver for STM32 DMA controller 4 * 5 * Inspired by dma-jz4740.c and tegra20-apb-dma.c 6 * 7 * Copyright (C) M'boumba Cedric Madianga 2015 8 * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com> 9 * Pierre-Yves Mordret <pierre-yves.mordret@st.com> 10 */ 11 12 #include <linux/clk.h> 13 #include <linux/delay.h> 14 #include <linux/dmaengine.h> 15 #include <linux/dma-mapping.h> 16 #include <linux/err.h> 17 #include <linux/init.h> 18 #include <linux/iopoll.h> 19 #include <linux/jiffies.h> 20 #include <linux/list.h> 21 #include <linux/module.h> 22 #include <linux/of.h> 23 #include <linux/of_device.h> 24 #include <linux/of_dma.h> 25 #include <linux/platform_device.h> 26 #include <linux/pm_runtime.h> 27 #include <linux/reset.h> 28 #include <linux/sched.h> 29 #include <linux/slab.h> 30 31 #include "virt-dma.h" 32 33 #define STM32_DMA_LISR 0x0000 /* DMA Low Int Status Reg */ 34 #define STM32_DMA_HISR 0x0004 /* DMA High Int Status Reg */ 35 #define STM32_DMA_LIFCR 0x0008 /* DMA Low Int Flag Clear Reg */ 36 #define STM32_DMA_HIFCR 0x000c /* DMA High Int Flag Clear Reg */ 37 #define STM32_DMA_TCI BIT(5) /* Transfer Complete Interrupt */ 38 #define STM32_DMA_HTI BIT(4) /* Half Transfer Interrupt */ 39 #define STM32_DMA_TEI BIT(3) /* Transfer Error Interrupt */ 40 #define STM32_DMA_DMEI BIT(2) /* Direct Mode Error Interrupt */ 41 #define STM32_DMA_FEI BIT(0) /* FIFO Error Interrupt */ 42 #define STM32_DMA_MASKI (STM32_DMA_TCI \ 43 | STM32_DMA_TEI \ 44 | STM32_DMA_DMEI \ 45 | STM32_DMA_FEI) 46 47 /* DMA Stream x Configuration Register */ 48 #define STM32_DMA_SCR(x) (0x0010 + 0x18 * (x)) /* x = 0..7 */ 49 #define STM32_DMA_SCR_REQ(n) ((n & 0x7) << 25) 50 #define STM32_DMA_SCR_MBURST_MASK GENMASK(24, 23) 51 #define STM32_DMA_SCR_MBURST(n) ((n & 0x3) << 23) 52 #define STM32_DMA_SCR_PBURST_MASK GENMASK(22, 21) 53 #define STM32_DMA_SCR_PBURST(n) ((n & 0x3) << 21) 54 #define STM32_DMA_SCR_PL_MASK GENMASK(17, 16) 55 #define STM32_DMA_SCR_PL(n) ((n & 0x3) << 16) 56 #define STM32_DMA_SCR_MSIZE_MASK GENMASK(14, 13) 57 #define STM32_DMA_SCR_MSIZE(n) ((n & 0x3) << 13) 58 #define STM32_DMA_SCR_PSIZE_MASK GENMASK(12, 11) 59 #define STM32_DMA_SCR_PSIZE(n) ((n & 0x3) << 11) 60 #define STM32_DMA_SCR_PSIZE_GET(n) ((n & STM32_DMA_SCR_PSIZE_MASK) >> 11) 61 #define STM32_DMA_SCR_DIR_MASK GENMASK(7, 6) 62 #define STM32_DMA_SCR_DIR(n) ((n & 0x3) << 6) 63 #define STM32_DMA_SCR_CT BIT(19) /* Target in double buffer */ 64 #define STM32_DMA_SCR_DBM BIT(18) /* Double Buffer Mode */ 65 #define STM32_DMA_SCR_PINCOS BIT(15) /* Peripheral inc offset size */ 66 #define STM32_DMA_SCR_MINC BIT(10) /* Memory increment mode */ 67 #define STM32_DMA_SCR_PINC BIT(9) /* Peripheral increment mode */ 68 #define STM32_DMA_SCR_CIRC BIT(8) /* Circular mode */ 69 #define STM32_DMA_SCR_PFCTRL BIT(5) /* Peripheral Flow Controller */ 70 #define STM32_DMA_SCR_TCIE BIT(4) /* Transfer Complete Int Enable 71 */ 72 #define STM32_DMA_SCR_TEIE BIT(2) /* Transfer Error Int Enable */ 73 #define STM32_DMA_SCR_DMEIE BIT(1) /* Direct Mode Err Int Enable */ 74 #define STM32_DMA_SCR_EN BIT(0) /* Stream Enable */ 75 #define STM32_DMA_SCR_CFG_MASK (STM32_DMA_SCR_PINC \ 76 | STM32_DMA_SCR_MINC \ 77 | STM32_DMA_SCR_PINCOS \ 78 | STM32_DMA_SCR_PL_MASK) 79 #define STM32_DMA_SCR_IRQ_MASK (STM32_DMA_SCR_TCIE \ 80 | STM32_DMA_SCR_TEIE \ 81 | STM32_DMA_SCR_DMEIE) 82 83 /* DMA Stream x number of data register */ 84 #define STM32_DMA_SNDTR(x) (0x0014 + 0x18 * (x)) 85 86 /* DMA stream peripheral address register */ 87 #define STM32_DMA_SPAR(x) (0x0018 + 0x18 * (x)) 88 89 /* DMA stream x memory 0 address register */ 90 #define STM32_DMA_SM0AR(x) (0x001c + 0x18 * (x)) 91 92 /* DMA stream x memory 1 address register */ 93 #define STM32_DMA_SM1AR(x) (0x0020 + 0x18 * (x)) 94 95 /* DMA stream x FIFO control register */ 96 #define STM32_DMA_SFCR(x) (0x0024 + 0x18 * (x)) 97 #define STM32_DMA_SFCR_FTH_MASK GENMASK(1, 0) 98 #define STM32_DMA_SFCR_FTH(n) (n & STM32_DMA_SFCR_FTH_MASK) 99 #define STM32_DMA_SFCR_FEIE BIT(7) /* FIFO error interrupt enable */ 100 #define STM32_DMA_SFCR_DMDIS BIT(2) /* Direct mode disable */ 101 #define STM32_DMA_SFCR_MASK (STM32_DMA_SFCR_FEIE \ 102 | STM32_DMA_SFCR_DMDIS) 103 104 /* DMA direction */ 105 #define STM32_DMA_DEV_TO_MEM 0x00 106 #define STM32_DMA_MEM_TO_DEV 0x01 107 #define STM32_DMA_MEM_TO_MEM 0x02 108 109 /* DMA priority level */ 110 #define STM32_DMA_PRIORITY_LOW 0x00 111 #define STM32_DMA_PRIORITY_MEDIUM 0x01 112 #define STM32_DMA_PRIORITY_HIGH 0x02 113 #define STM32_DMA_PRIORITY_VERY_HIGH 0x03 114 115 /* DMA FIFO threshold selection */ 116 #define STM32_DMA_FIFO_THRESHOLD_1QUARTERFULL 0x00 117 #define STM32_DMA_FIFO_THRESHOLD_HALFFULL 0x01 118 #define STM32_DMA_FIFO_THRESHOLD_3QUARTERSFULL 0x02 119 #define STM32_DMA_FIFO_THRESHOLD_FULL 0x03 120 #define STM32_DMA_FIFO_THRESHOLD_NONE 0x04 121 122 #define STM32_DMA_MAX_DATA_ITEMS 0xffff 123 /* 124 * Valid transfer starts from @0 to @0xFFFE leading to unaligned scatter 125 * gather at boundary. Thus it's safer to round down this value on FIFO 126 * size (16 Bytes) 127 */ 128 #define STM32_DMA_ALIGNED_MAX_DATA_ITEMS \ 129 ALIGN_DOWN(STM32_DMA_MAX_DATA_ITEMS, 16) 130 #define STM32_DMA_MAX_CHANNELS 0x08 131 #define STM32_DMA_MAX_REQUEST_ID 0x08 132 #define STM32_DMA_MAX_DATA_PARAM 0x03 133 #define STM32_DMA_FIFO_SIZE 16 /* FIFO is 16 bytes */ 134 #define STM32_DMA_MIN_BURST 4 135 #define STM32_DMA_MAX_BURST 16 136 137 /* DMA Features */ 138 #define STM32_DMA_THRESHOLD_FTR_MASK GENMASK(1, 0) 139 #define STM32_DMA_THRESHOLD_FTR_GET(n) ((n) & STM32_DMA_THRESHOLD_FTR_MASK) 140 #define STM32_DMA_DIRECT_MODE_MASK BIT(2) 141 #define STM32_DMA_DIRECT_MODE_GET(n) (((n) & STM32_DMA_DIRECT_MODE_MASK) \ 142 >> 2) 143 144 enum stm32_dma_width { 145 STM32_DMA_BYTE, 146 STM32_DMA_HALF_WORD, 147 STM32_DMA_WORD, 148 }; 149 150 enum stm32_dma_burst_size { 151 STM32_DMA_BURST_SINGLE, 152 STM32_DMA_BURST_INCR4, 153 STM32_DMA_BURST_INCR8, 154 STM32_DMA_BURST_INCR16, 155 }; 156 157 /** 158 * struct stm32_dma_cfg - STM32 DMA custom configuration 159 * @channel_id: channel ID 160 * @request_line: DMA request 161 * @stream_config: 32bit mask specifying the DMA channel configuration 162 * @features: 32bit mask specifying the DMA Feature list 163 */ 164 struct stm32_dma_cfg { 165 u32 channel_id; 166 u32 request_line; 167 u32 stream_config; 168 u32 features; 169 }; 170 171 struct stm32_dma_chan_reg { 172 u32 dma_lisr; 173 u32 dma_hisr; 174 u32 dma_lifcr; 175 u32 dma_hifcr; 176 u32 dma_scr; 177 u32 dma_sndtr; 178 u32 dma_spar; 179 u32 dma_sm0ar; 180 u32 dma_sm1ar; 181 u32 dma_sfcr; 182 }; 183 184 struct stm32_dma_sg_req { 185 u32 len; 186 struct stm32_dma_chan_reg chan_reg; 187 }; 188 189 struct stm32_dma_desc { 190 struct virt_dma_desc vdesc; 191 bool cyclic; 192 u32 num_sgs; 193 struct stm32_dma_sg_req sg_req[]; 194 }; 195 196 struct stm32_dma_chan { 197 struct virt_dma_chan vchan; 198 bool config_init; 199 bool busy; 200 u32 id; 201 u32 irq; 202 struct stm32_dma_desc *desc; 203 u32 next_sg; 204 struct dma_slave_config dma_sconfig; 205 struct stm32_dma_chan_reg chan_reg; 206 u32 threshold; 207 u32 mem_burst; 208 u32 mem_width; 209 }; 210 211 struct stm32_dma_device { 212 struct dma_device ddev; 213 void __iomem *base; 214 struct clk *clk; 215 bool mem2mem; 216 struct stm32_dma_chan chan[STM32_DMA_MAX_CHANNELS]; 217 }; 218 219 static struct stm32_dma_device *stm32_dma_get_dev(struct stm32_dma_chan *chan) 220 { 221 return container_of(chan->vchan.chan.device, struct stm32_dma_device, 222 ddev); 223 } 224 225 static struct stm32_dma_chan *to_stm32_dma_chan(struct dma_chan *c) 226 { 227 return container_of(c, struct stm32_dma_chan, vchan.chan); 228 } 229 230 static struct stm32_dma_desc *to_stm32_dma_desc(struct virt_dma_desc *vdesc) 231 { 232 return container_of(vdesc, struct stm32_dma_desc, vdesc); 233 } 234 235 static struct device *chan2dev(struct stm32_dma_chan *chan) 236 { 237 return &chan->vchan.chan.dev->device; 238 } 239 240 static u32 stm32_dma_read(struct stm32_dma_device *dmadev, u32 reg) 241 { 242 return readl_relaxed(dmadev->base + reg); 243 } 244 245 static void stm32_dma_write(struct stm32_dma_device *dmadev, u32 reg, u32 val) 246 { 247 writel_relaxed(val, dmadev->base + reg); 248 } 249 250 static int stm32_dma_get_width(struct stm32_dma_chan *chan, 251 enum dma_slave_buswidth width) 252 { 253 switch (width) { 254 case DMA_SLAVE_BUSWIDTH_1_BYTE: 255 return STM32_DMA_BYTE; 256 case DMA_SLAVE_BUSWIDTH_2_BYTES: 257 return STM32_DMA_HALF_WORD; 258 case DMA_SLAVE_BUSWIDTH_4_BYTES: 259 return STM32_DMA_WORD; 260 default: 261 dev_err(chan2dev(chan), "Dma bus width not supported\n"); 262 return -EINVAL; 263 } 264 } 265 266 static enum dma_slave_buswidth stm32_dma_get_max_width(u32 buf_len, 267 dma_addr_t buf_addr, 268 u32 threshold) 269 { 270 enum dma_slave_buswidth max_width; 271 u64 addr = buf_addr; 272 273 if (threshold == STM32_DMA_FIFO_THRESHOLD_FULL) 274 max_width = DMA_SLAVE_BUSWIDTH_4_BYTES; 275 else 276 max_width = DMA_SLAVE_BUSWIDTH_2_BYTES; 277 278 while ((buf_len < max_width || buf_len % max_width) && 279 max_width > DMA_SLAVE_BUSWIDTH_1_BYTE) 280 max_width = max_width >> 1; 281 282 if (do_div(addr, max_width)) 283 max_width = DMA_SLAVE_BUSWIDTH_1_BYTE; 284 285 return max_width; 286 } 287 288 static bool stm32_dma_fifo_threshold_is_allowed(u32 burst, u32 threshold, 289 enum dma_slave_buswidth width) 290 { 291 u32 remaining; 292 293 if (threshold == STM32_DMA_FIFO_THRESHOLD_NONE) 294 return false; 295 296 if (width != DMA_SLAVE_BUSWIDTH_UNDEFINED) { 297 if (burst != 0) { 298 /* 299 * If number of beats fit in several whole bursts 300 * this configuration is allowed. 301 */ 302 remaining = ((STM32_DMA_FIFO_SIZE / width) * 303 (threshold + 1) / 4) % burst; 304 305 if (remaining == 0) 306 return true; 307 } else { 308 return true; 309 } 310 } 311 312 return false; 313 } 314 315 static bool stm32_dma_is_burst_possible(u32 buf_len, u32 threshold) 316 { 317 /* If FIFO direct mode, burst is not possible */ 318 if (threshold == STM32_DMA_FIFO_THRESHOLD_NONE) 319 return false; 320 321 /* 322 * Buffer or period length has to be aligned on FIFO depth. 323 * Otherwise bytes may be stuck within FIFO at buffer or period 324 * length. 325 */ 326 return ((buf_len % ((threshold + 1) * 4)) == 0); 327 } 328 329 static u32 stm32_dma_get_best_burst(u32 buf_len, u32 max_burst, u32 threshold, 330 enum dma_slave_buswidth width) 331 { 332 u32 best_burst = max_burst; 333 334 if (best_burst == 1 || !stm32_dma_is_burst_possible(buf_len, threshold)) 335 return 0; 336 337 while ((buf_len < best_burst * width && best_burst > 1) || 338 !stm32_dma_fifo_threshold_is_allowed(best_burst, threshold, 339 width)) { 340 if (best_burst > STM32_DMA_MIN_BURST) 341 best_burst = best_burst >> 1; 342 else 343 best_burst = 0; 344 } 345 346 return best_burst; 347 } 348 349 static int stm32_dma_get_burst(struct stm32_dma_chan *chan, u32 maxburst) 350 { 351 switch (maxburst) { 352 case 0: 353 case 1: 354 return STM32_DMA_BURST_SINGLE; 355 case 4: 356 return STM32_DMA_BURST_INCR4; 357 case 8: 358 return STM32_DMA_BURST_INCR8; 359 case 16: 360 return STM32_DMA_BURST_INCR16; 361 default: 362 dev_err(chan2dev(chan), "Dma burst size not supported\n"); 363 return -EINVAL; 364 } 365 } 366 367 static void stm32_dma_set_fifo_config(struct stm32_dma_chan *chan, 368 u32 src_burst, u32 dst_burst) 369 { 370 chan->chan_reg.dma_sfcr &= ~STM32_DMA_SFCR_MASK; 371 chan->chan_reg.dma_scr &= ~STM32_DMA_SCR_DMEIE; 372 373 if (!src_burst && !dst_burst) { 374 /* Using direct mode */ 375 chan->chan_reg.dma_scr |= STM32_DMA_SCR_DMEIE; 376 } else { 377 /* Using FIFO mode */ 378 chan->chan_reg.dma_sfcr |= STM32_DMA_SFCR_MASK; 379 } 380 } 381 382 static int stm32_dma_slave_config(struct dma_chan *c, 383 struct dma_slave_config *config) 384 { 385 struct stm32_dma_chan *chan = to_stm32_dma_chan(c); 386 387 memcpy(&chan->dma_sconfig, config, sizeof(*config)); 388 389 chan->config_init = true; 390 391 return 0; 392 } 393 394 static u32 stm32_dma_irq_status(struct stm32_dma_chan *chan) 395 { 396 struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); 397 u32 flags, dma_isr; 398 399 /* 400 * Read "flags" from DMA_xISR register corresponding to the selected 401 * DMA channel at the correct bit offset inside that register. 402 * 403 * If (ch % 4) is 2 or 3, left shift the mask by 16 bits. 404 * If (ch % 4) is 1 or 3, additionally left shift the mask by 6 bits. 405 */ 406 407 if (chan->id & 4) 408 dma_isr = stm32_dma_read(dmadev, STM32_DMA_HISR); 409 else 410 dma_isr = stm32_dma_read(dmadev, STM32_DMA_LISR); 411 412 flags = dma_isr >> (((chan->id & 2) << 3) | ((chan->id & 1) * 6)); 413 414 return flags & STM32_DMA_MASKI; 415 } 416 417 static void stm32_dma_irq_clear(struct stm32_dma_chan *chan, u32 flags) 418 { 419 struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); 420 u32 dma_ifcr; 421 422 /* 423 * Write "flags" to the DMA_xIFCR register corresponding to the selected 424 * DMA channel at the correct bit offset inside that register. 425 * 426 * If (ch % 4) is 2 or 3, left shift the mask by 16 bits. 427 * If (ch % 4) is 1 or 3, additionally left shift the mask by 6 bits. 428 */ 429 flags &= STM32_DMA_MASKI; 430 dma_ifcr = flags << (((chan->id & 2) << 3) | ((chan->id & 1) * 6)); 431 432 if (chan->id & 4) 433 stm32_dma_write(dmadev, STM32_DMA_HIFCR, dma_ifcr); 434 else 435 stm32_dma_write(dmadev, STM32_DMA_LIFCR, dma_ifcr); 436 } 437 438 static int stm32_dma_disable_chan(struct stm32_dma_chan *chan) 439 { 440 struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); 441 u32 dma_scr, id, reg; 442 443 id = chan->id; 444 reg = STM32_DMA_SCR(id); 445 dma_scr = stm32_dma_read(dmadev, reg); 446 447 if (dma_scr & STM32_DMA_SCR_EN) { 448 dma_scr &= ~STM32_DMA_SCR_EN; 449 stm32_dma_write(dmadev, reg, dma_scr); 450 451 return readl_relaxed_poll_timeout_atomic(dmadev->base + reg, 452 dma_scr, !(dma_scr & STM32_DMA_SCR_EN), 453 10, 1000000); 454 } 455 456 return 0; 457 } 458 459 static void stm32_dma_stop(struct stm32_dma_chan *chan) 460 { 461 struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); 462 u32 dma_scr, dma_sfcr, status; 463 int ret; 464 465 /* Disable interrupts */ 466 dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id)); 467 dma_scr &= ~STM32_DMA_SCR_IRQ_MASK; 468 stm32_dma_write(dmadev, STM32_DMA_SCR(chan->id), dma_scr); 469 dma_sfcr = stm32_dma_read(dmadev, STM32_DMA_SFCR(chan->id)); 470 dma_sfcr &= ~STM32_DMA_SFCR_FEIE; 471 stm32_dma_write(dmadev, STM32_DMA_SFCR(chan->id), dma_sfcr); 472 473 /* Disable DMA */ 474 ret = stm32_dma_disable_chan(chan); 475 if (ret < 0) 476 return; 477 478 /* Clear interrupt status if it is there */ 479 status = stm32_dma_irq_status(chan); 480 if (status) { 481 dev_dbg(chan2dev(chan), "%s(): clearing interrupt: 0x%08x\n", 482 __func__, status); 483 stm32_dma_irq_clear(chan, status); 484 } 485 486 chan->busy = false; 487 } 488 489 static int stm32_dma_terminate_all(struct dma_chan *c) 490 { 491 struct stm32_dma_chan *chan = to_stm32_dma_chan(c); 492 unsigned long flags; 493 LIST_HEAD(head); 494 495 spin_lock_irqsave(&chan->vchan.lock, flags); 496 497 if (chan->desc) { 498 vchan_terminate_vdesc(&chan->desc->vdesc); 499 if (chan->busy) 500 stm32_dma_stop(chan); 501 chan->desc = NULL; 502 } 503 504 vchan_get_all_descriptors(&chan->vchan, &head); 505 spin_unlock_irqrestore(&chan->vchan.lock, flags); 506 vchan_dma_desc_free_list(&chan->vchan, &head); 507 508 return 0; 509 } 510 511 static void stm32_dma_synchronize(struct dma_chan *c) 512 { 513 struct stm32_dma_chan *chan = to_stm32_dma_chan(c); 514 515 vchan_synchronize(&chan->vchan); 516 } 517 518 static void stm32_dma_dump_reg(struct stm32_dma_chan *chan) 519 { 520 struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); 521 u32 scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id)); 522 u32 ndtr = stm32_dma_read(dmadev, STM32_DMA_SNDTR(chan->id)); 523 u32 spar = stm32_dma_read(dmadev, STM32_DMA_SPAR(chan->id)); 524 u32 sm0ar = stm32_dma_read(dmadev, STM32_DMA_SM0AR(chan->id)); 525 u32 sm1ar = stm32_dma_read(dmadev, STM32_DMA_SM1AR(chan->id)); 526 u32 sfcr = stm32_dma_read(dmadev, STM32_DMA_SFCR(chan->id)); 527 528 dev_dbg(chan2dev(chan), "SCR: 0x%08x\n", scr); 529 dev_dbg(chan2dev(chan), "NDTR: 0x%08x\n", ndtr); 530 dev_dbg(chan2dev(chan), "SPAR: 0x%08x\n", spar); 531 dev_dbg(chan2dev(chan), "SM0AR: 0x%08x\n", sm0ar); 532 dev_dbg(chan2dev(chan), "SM1AR: 0x%08x\n", sm1ar); 533 dev_dbg(chan2dev(chan), "SFCR: 0x%08x\n", sfcr); 534 } 535 536 static void stm32_dma_configure_next_sg(struct stm32_dma_chan *chan); 537 538 static void stm32_dma_start_transfer(struct stm32_dma_chan *chan) 539 { 540 struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); 541 struct virt_dma_desc *vdesc; 542 struct stm32_dma_sg_req *sg_req; 543 struct stm32_dma_chan_reg *reg; 544 u32 status; 545 int ret; 546 547 ret = stm32_dma_disable_chan(chan); 548 if (ret < 0) 549 return; 550 551 if (!chan->desc) { 552 vdesc = vchan_next_desc(&chan->vchan); 553 if (!vdesc) 554 return; 555 556 list_del(&vdesc->node); 557 558 chan->desc = to_stm32_dma_desc(vdesc); 559 chan->next_sg = 0; 560 } 561 562 if (chan->next_sg == chan->desc->num_sgs) 563 chan->next_sg = 0; 564 565 sg_req = &chan->desc->sg_req[chan->next_sg]; 566 reg = &sg_req->chan_reg; 567 568 reg->dma_scr &= ~STM32_DMA_SCR_EN; 569 stm32_dma_write(dmadev, STM32_DMA_SCR(chan->id), reg->dma_scr); 570 stm32_dma_write(dmadev, STM32_DMA_SPAR(chan->id), reg->dma_spar); 571 stm32_dma_write(dmadev, STM32_DMA_SM0AR(chan->id), reg->dma_sm0ar); 572 stm32_dma_write(dmadev, STM32_DMA_SFCR(chan->id), reg->dma_sfcr); 573 stm32_dma_write(dmadev, STM32_DMA_SM1AR(chan->id), reg->dma_sm1ar); 574 stm32_dma_write(dmadev, STM32_DMA_SNDTR(chan->id), reg->dma_sndtr); 575 576 chan->next_sg++; 577 578 /* Clear interrupt status if it is there */ 579 status = stm32_dma_irq_status(chan); 580 if (status) 581 stm32_dma_irq_clear(chan, status); 582 583 if (chan->desc->cyclic) 584 stm32_dma_configure_next_sg(chan); 585 586 stm32_dma_dump_reg(chan); 587 588 /* Start DMA */ 589 reg->dma_scr |= STM32_DMA_SCR_EN; 590 stm32_dma_write(dmadev, STM32_DMA_SCR(chan->id), reg->dma_scr); 591 592 chan->busy = true; 593 594 dev_dbg(chan2dev(chan), "vchan %pK: started\n", &chan->vchan); 595 } 596 597 static void stm32_dma_configure_next_sg(struct stm32_dma_chan *chan) 598 { 599 struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); 600 struct stm32_dma_sg_req *sg_req; 601 u32 dma_scr, dma_sm0ar, dma_sm1ar, id; 602 603 id = chan->id; 604 dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(id)); 605 606 if (dma_scr & STM32_DMA_SCR_DBM) { 607 if (chan->next_sg == chan->desc->num_sgs) 608 chan->next_sg = 0; 609 610 sg_req = &chan->desc->sg_req[chan->next_sg]; 611 612 if (dma_scr & STM32_DMA_SCR_CT) { 613 dma_sm0ar = sg_req->chan_reg.dma_sm0ar; 614 stm32_dma_write(dmadev, STM32_DMA_SM0AR(id), dma_sm0ar); 615 dev_dbg(chan2dev(chan), "CT=1 <=> SM0AR: 0x%08x\n", 616 stm32_dma_read(dmadev, STM32_DMA_SM0AR(id))); 617 } else { 618 dma_sm1ar = sg_req->chan_reg.dma_sm1ar; 619 stm32_dma_write(dmadev, STM32_DMA_SM1AR(id), dma_sm1ar); 620 dev_dbg(chan2dev(chan), "CT=0 <=> SM1AR: 0x%08x\n", 621 stm32_dma_read(dmadev, STM32_DMA_SM1AR(id))); 622 } 623 } 624 } 625 626 static void stm32_dma_handle_chan_done(struct stm32_dma_chan *chan) 627 { 628 if (chan->desc) { 629 if (chan->desc->cyclic) { 630 vchan_cyclic_callback(&chan->desc->vdesc); 631 chan->next_sg++; 632 stm32_dma_configure_next_sg(chan); 633 } else { 634 chan->busy = false; 635 if (chan->next_sg == chan->desc->num_sgs) { 636 vchan_cookie_complete(&chan->desc->vdesc); 637 chan->desc = NULL; 638 } 639 stm32_dma_start_transfer(chan); 640 } 641 } 642 } 643 644 static irqreturn_t stm32_dma_chan_irq(int irq, void *devid) 645 { 646 struct stm32_dma_chan *chan = devid; 647 struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); 648 u32 status, scr, sfcr; 649 650 spin_lock(&chan->vchan.lock); 651 652 status = stm32_dma_irq_status(chan); 653 scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id)); 654 sfcr = stm32_dma_read(dmadev, STM32_DMA_SFCR(chan->id)); 655 656 if (status & STM32_DMA_FEI) { 657 stm32_dma_irq_clear(chan, STM32_DMA_FEI); 658 status &= ~STM32_DMA_FEI; 659 if (sfcr & STM32_DMA_SFCR_FEIE) { 660 if (!(scr & STM32_DMA_SCR_EN) && 661 !(status & STM32_DMA_TCI)) 662 dev_err(chan2dev(chan), "FIFO Error\n"); 663 else 664 dev_dbg(chan2dev(chan), "FIFO over/underrun\n"); 665 } 666 } 667 if (status & STM32_DMA_DMEI) { 668 stm32_dma_irq_clear(chan, STM32_DMA_DMEI); 669 status &= ~STM32_DMA_DMEI; 670 if (sfcr & STM32_DMA_SCR_DMEIE) 671 dev_dbg(chan2dev(chan), "Direct mode overrun\n"); 672 } 673 674 if (status & STM32_DMA_TCI) { 675 stm32_dma_irq_clear(chan, STM32_DMA_TCI); 676 if (scr & STM32_DMA_SCR_TCIE) 677 stm32_dma_handle_chan_done(chan); 678 status &= ~STM32_DMA_TCI; 679 } 680 681 if (status & STM32_DMA_HTI) { 682 stm32_dma_irq_clear(chan, STM32_DMA_HTI); 683 status &= ~STM32_DMA_HTI; 684 } 685 686 if (status) { 687 stm32_dma_irq_clear(chan, status); 688 dev_err(chan2dev(chan), "DMA error: status=0x%08x\n", status); 689 if (!(scr & STM32_DMA_SCR_EN)) 690 dev_err(chan2dev(chan), "chan disabled by HW\n"); 691 } 692 693 spin_unlock(&chan->vchan.lock); 694 695 return IRQ_HANDLED; 696 } 697 698 static void stm32_dma_issue_pending(struct dma_chan *c) 699 { 700 struct stm32_dma_chan *chan = to_stm32_dma_chan(c); 701 unsigned long flags; 702 703 spin_lock_irqsave(&chan->vchan.lock, flags); 704 if (vchan_issue_pending(&chan->vchan) && !chan->desc && !chan->busy) { 705 dev_dbg(chan2dev(chan), "vchan %pK: issued\n", &chan->vchan); 706 stm32_dma_start_transfer(chan); 707 708 } 709 spin_unlock_irqrestore(&chan->vchan.lock, flags); 710 } 711 712 static int stm32_dma_set_xfer_param(struct stm32_dma_chan *chan, 713 enum dma_transfer_direction direction, 714 enum dma_slave_buswidth *buswidth, 715 u32 buf_len, dma_addr_t buf_addr) 716 { 717 enum dma_slave_buswidth src_addr_width, dst_addr_width; 718 int src_bus_width, dst_bus_width; 719 int src_burst_size, dst_burst_size; 720 u32 src_maxburst, dst_maxburst, src_best_burst, dst_best_burst; 721 u32 dma_scr, fifoth; 722 723 src_addr_width = chan->dma_sconfig.src_addr_width; 724 dst_addr_width = chan->dma_sconfig.dst_addr_width; 725 src_maxburst = chan->dma_sconfig.src_maxburst; 726 dst_maxburst = chan->dma_sconfig.dst_maxburst; 727 fifoth = chan->threshold; 728 729 switch (direction) { 730 case DMA_MEM_TO_DEV: 731 /* Set device data size */ 732 dst_bus_width = stm32_dma_get_width(chan, dst_addr_width); 733 if (dst_bus_width < 0) 734 return dst_bus_width; 735 736 /* Set device burst size */ 737 dst_best_burst = stm32_dma_get_best_burst(buf_len, 738 dst_maxburst, 739 fifoth, 740 dst_addr_width); 741 742 dst_burst_size = stm32_dma_get_burst(chan, dst_best_burst); 743 if (dst_burst_size < 0) 744 return dst_burst_size; 745 746 /* Set memory data size */ 747 src_addr_width = stm32_dma_get_max_width(buf_len, buf_addr, 748 fifoth); 749 chan->mem_width = src_addr_width; 750 src_bus_width = stm32_dma_get_width(chan, src_addr_width); 751 if (src_bus_width < 0) 752 return src_bus_width; 753 754 /* Set memory burst size */ 755 src_maxburst = STM32_DMA_MAX_BURST; 756 src_best_burst = stm32_dma_get_best_burst(buf_len, 757 src_maxburst, 758 fifoth, 759 src_addr_width); 760 src_burst_size = stm32_dma_get_burst(chan, src_best_burst); 761 if (src_burst_size < 0) 762 return src_burst_size; 763 764 dma_scr = STM32_DMA_SCR_DIR(STM32_DMA_MEM_TO_DEV) | 765 STM32_DMA_SCR_PSIZE(dst_bus_width) | 766 STM32_DMA_SCR_MSIZE(src_bus_width) | 767 STM32_DMA_SCR_PBURST(dst_burst_size) | 768 STM32_DMA_SCR_MBURST(src_burst_size); 769 770 /* Set FIFO threshold */ 771 chan->chan_reg.dma_sfcr &= ~STM32_DMA_SFCR_FTH_MASK; 772 if (fifoth != STM32_DMA_FIFO_THRESHOLD_NONE) 773 chan->chan_reg.dma_sfcr |= STM32_DMA_SFCR_FTH(fifoth); 774 775 /* Set peripheral address */ 776 chan->chan_reg.dma_spar = chan->dma_sconfig.dst_addr; 777 *buswidth = dst_addr_width; 778 break; 779 780 case DMA_DEV_TO_MEM: 781 /* Set device data size */ 782 src_bus_width = stm32_dma_get_width(chan, src_addr_width); 783 if (src_bus_width < 0) 784 return src_bus_width; 785 786 /* Set device burst size */ 787 src_best_burst = stm32_dma_get_best_burst(buf_len, 788 src_maxburst, 789 fifoth, 790 src_addr_width); 791 chan->mem_burst = src_best_burst; 792 src_burst_size = stm32_dma_get_burst(chan, src_best_burst); 793 if (src_burst_size < 0) 794 return src_burst_size; 795 796 /* Set memory data size */ 797 dst_addr_width = stm32_dma_get_max_width(buf_len, buf_addr, 798 fifoth); 799 chan->mem_width = dst_addr_width; 800 dst_bus_width = stm32_dma_get_width(chan, dst_addr_width); 801 if (dst_bus_width < 0) 802 return dst_bus_width; 803 804 /* Set memory burst size */ 805 dst_maxburst = STM32_DMA_MAX_BURST; 806 dst_best_burst = stm32_dma_get_best_burst(buf_len, 807 dst_maxburst, 808 fifoth, 809 dst_addr_width); 810 chan->mem_burst = dst_best_burst; 811 dst_burst_size = stm32_dma_get_burst(chan, dst_best_burst); 812 if (dst_burst_size < 0) 813 return dst_burst_size; 814 815 dma_scr = STM32_DMA_SCR_DIR(STM32_DMA_DEV_TO_MEM) | 816 STM32_DMA_SCR_PSIZE(src_bus_width) | 817 STM32_DMA_SCR_MSIZE(dst_bus_width) | 818 STM32_DMA_SCR_PBURST(src_burst_size) | 819 STM32_DMA_SCR_MBURST(dst_burst_size); 820 821 /* Set FIFO threshold */ 822 chan->chan_reg.dma_sfcr &= ~STM32_DMA_SFCR_FTH_MASK; 823 if (fifoth != STM32_DMA_FIFO_THRESHOLD_NONE) 824 chan->chan_reg.dma_sfcr |= STM32_DMA_SFCR_FTH(fifoth); 825 826 /* Set peripheral address */ 827 chan->chan_reg.dma_spar = chan->dma_sconfig.src_addr; 828 *buswidth = chan->dma_sconfig.src_addr_width; 829 break; 830 831 default: 832 dev_err(chan2dev(chan), "Dma direction is not supported\n"); 833 return -EINVAL; 834 } 835 836 stm32_dma_set_fifo_config(chan, src_best_burst, dst_best_burst); 837 838 /* Set DMA control register */ 839 chan->chan_reg.dma_scr &= ~(STM32_DMA_SCR_DIR_MASK | 840 STM32_DMA_SCR_PSIZE_MASK | STM32_DMA_SCR_MSIZE_MASK | 841 STM32_DMA_SCR_PBURST_MASK | STM32_DMA_SCR_MBURST_MASK); 842 chan->chan_reg.dma_scr |= dma_scr; 843 844 return 0; 845 } 846 847 static void stm32_dma_clear_reg(struct stm32_dma_chan_reg *regs) 848 { 849 memset(regs, 0, sizeof(struct stm32_dma_chan_reg)); 850 } 851 852 static struct dma_async_tx_descriptor *stm32_dma_prep_slave_sg( 853 struct dma_chan *c, struct scatterlist *sgl, 854 u32 sg_len, enum dma_transfer_direction direction, 855 unsigned long flags, void *context) 856 { 857 struct stm32_dma_chan *chan = to_stm32_dma_chan(c); 858 struct stm32_dma_desc *desc; 859 struct scatterlist *sg; 860 enum dma_slave_buswidth buswidth; 861 u32 nb_data_items; 862 int i, ret; 863 864 if (!chan->config_init) { 865 dev_err(chan2dev(chan), "dma channel is not configured\n"); 866 return NULL; 867 } 868 869 if (sg_len < 1) { 870 dev_err(chan2dev(chan), "Invalid segment length %d\n", sg_len); 871 return NULL; 872 } 873 874 desc = kzalloc(struct_size(desc, sg_req, sg_len), GFP_NOWAIT); 875 if (!desc) 876 return NULL; 877 878 /* Set peripheral flow controller */ 879 if (chan->dma_sconfig.device_fc) 880 chan->chan_reg.dma_scr |= STM32_DMA_SCR_PFCTRL; 881 else 882 chan->chan_reg.dma_scr &= ~STM32_DMA_SCR_PFCTRL; 883 884 for_each_sg(sgl, sg, sg_len, i) { 885 ret = stm32_dma_set_xfer_param(chan, direction, &buswidth, 886 sg_dma_len(sg), 887 sg_dma_address(sg)); 888 if (ret < 0) 889 goto err; 890 891 desc->sg_req[i].len = sg_dma_len(sg); 892 893 nb_data_items = desc->sg_req[i].len / buswidth; 894 if (nb_data_items > STM32_DMA_ALIGNED_MAX_DATA_ITEMS) { 895 dev_err(chan2dev(chan), "nb items not supported\n"); 896 goto err; 897 } 898 899 stm32_dma_clear_reg(&desc->sg_req[i].chan_reg); 900 desc->sg_req[i].chan_reg.dma_scr = chan->chan_reg.dma_scr; 901 desc->sg_req[i].chan_reg.dma_sfcr = chan->chan_reg.dma_sfcr; 902 desc->sg_req[i].chan_reg.dma_spar = chan->chan_reg.dma_spar; 903 desc->sg_req[i].chan_reg.dma_sm0ar = sg_dma_address(sg); 904 desc->sg_req[i].chan_reg.dma_sm1ar = sg_dma_address(sg); 905 desc->sg_req[i].chan_reg.dma_sndtr = nb_data_items; 906 } 907 908 desc->num_sgs = sg_len; 909 desc->cyclic = false; 910 911 return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags); 912 913 err: 914 kfree(desc); 915 return NULL; 916 } 917 918 static struct dma_async_tx_descriptor *stm32_dma_prep_dma_cyclic( 919 struct dma_chan *c, dma_addr_t buf_addr, size_t buf_len, 920 size_t period_len, enum dma_transfer_direction direction, 921 unsigned long flags) 922 { 923 struct stm32_dma_chan *chan = to_stm32_dma_chan(c); 924 struct stm32_dma_desc *desc; 925 enum dma_slave_buswidth buswidth; 926 u32 num_periods, nb_data_items; 927 int i, ret; 928 929 if (!buf_len || !period_len) { 930 dev_err(chan2dev(chan), "Invalid buffer/period len\n"); 931 return NULL; 932 } 933 934 if (!chan->config_init) { 935 dev_err(chan2dev(chan), "dma channel is not configured\n"); 936 return NULL; 937 } 938 939 if (buf_len % period_len) { 940 dev_err(chan2dev(chan), "buf_len not multiple of period_len\n"); 941 return NULL; 942 } 943 944 /* 945 * We allow to take more number of requests till DMA is 946 * not started. The driver will loop over all requests. 947 * Once DMA is started then new requests can be queued only after 948 * terminating the DMA. 949 */ 950 if (chan->busy) { 951 dev_err(chan2dev(chan), "Request not allowed when dma busy\n"); 952 return NULL; 953 } 954 955 ret = stm32_dma_set_xfer_param(chan, direction, &buswidth, period_len, 956 buf_addr); 957 if (ret < 0) 958 return NULL; 959 960 nb_data_items = period_len / buswidth; 961 if (nb_data_items > STM32_DMA_ALIGNED_MAX_DATA_ITEMS) { 962 dev_err(chan2dev(chan), "number of items not supported\n"); 963 return NULL; 964 } 965 966 /* Enable Circular mode or double buffer mode */ 967 if (buf_len == period_len) 968 chan->chan_reg.dma_scr |= STM32_DMA_SCR_CIRC; 969 else 970 chan->chan_reg.dma_scr |= STM32_DMA_SCR_DBM; 971 972 /* Clear periph ctrl if client set it */ 973 chan->chan_reg.dma_scr &= ~STM32_DMA_SCR_PFCTRL; 974 975 num_periods = buf_len / period_len; 976 977 desc = kzalloc(struct_size(desc, sg_req, num_periods), GFP_NOWAIT); 978 if (!desc) 979 return NULL; 980 981 for (i = 0; i < num_periods; i++) { 982 desc->sg_req[i].len = period_len; 983 984 stm32_dma_clear_reg(&desc->sg_req[i].chan_reg); 985 desc->sg_req[i].chan_reg.dma_scr = chan->chan_reg.dma_scr; 986 desc->sg_req[i].chan_reg.dma_sfcr = chan->chan_reg.dma_sfcr; 987 desc->sg_req[i].chan_reg.dma_spar = chan->chan_reg.dma_spar; 988 desc->sg_req[i].chan_reg.dma_sm0ar = buf_addr; 989 desc->sg_req[i].chan_reg.dma_sm1ar = buf_addr; 990 desc->sg_req[i].chan_reg.dma_sndtr = nb_data_items; 991 buf_addr += period_len; 992 } 993 994 desc->num_sgs = num_periods; 995 desc->cyclic = true; 996 997 return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags); 998 } 999 1000 static struct dma_async_tx_descriptor *stm32_dma_prep_dma_memcpy( 1001 struct dma_chan *c, dma_addr_t dest, 1002 dma_addr_t src, size_t len, unsigned long flags) 1003 { 1004 struct stm32_dma_chan *chan = to_stm32_dma_chan(c); 1005 enum dma_slave_buswidth max_width; 1006 struct stm32_dma_desc *desc; 1007 size_t xfer_count, offset; 1008 u32 num_sgs, best_burst, dma_burst, threshold; 1009 int i; 1010 1011 num_sgs = DIV_ROUND_UP(len, STM32_DMA_ALIGNED_MAX_DATA_ITEMS); 1012 desc = kzalloc(struct_size(desc, sg_req, num_sgs), GFP_NOWAIT); 1013 if (!desc) 1014 return NULL; 1015 1016 threshold = chan->threshold; 1017 1018 for (offset = 0, i = 0; offset < len; offset += xfer_count, i++) { 1019 xfer_count = min_t(size_t, len - offset, 1020 STM32_DMA_ALIGNED_MAX_DATA_ITEMS); 1021 1022 /* Compute best burst size */ 1023 max_width = DMA_SLAVE_BUSWIDTH_1_BYTE; 1024 best_burst = stm32_dma_get_best_burst(len, STM32_DMA_MAX_BURST, 1025 threshold, max_width); 1026 dma_burst = stm32_dma_get_burst(chan, best_burst); 1027 1028 stm32_dma_clear_reg(&desc->sg_req[i].chan_reg); 1029 desc->sg_req[i].chan_reg.dma_scr = 1030 STM32_DMA_SCR_DIR(STM32_DMA_MEM_TO_MEM) | 1031 STM32_DMA_SCR_PBURST(dma_burst) | 1032 STM32_DMA_SCR_MBURST(dma_burst) | 1033 STM32_DMA_SCR_MINC | 1034 STM32_DMA_SCR_PINC | 1035 STM32_DMA_SCR_TCIE | 1036 STM32_DMA_SCR_TEIE; 1037 desc->sg_req[i].chan_reg.dma_sfcr |= STM32_DMA_SFCR_MASK; 1038 desc->sg_req[i].chan_reg.dma_sfcr |= 1039 STM32_DMA_SFCR_FTH(threshold); 1040 desc->sg_req[i].chan_reg.dma_spar = src + offset; 1041 desc->sg_req[i].chan_reg.dma_sm0ar = dest + offset; 1042 desc->sg_req[i].chan_reg.dma_sndtr = xfer_count; 1043 desc->sg_req[i].len = xfer_count; 1044 } 1045 1046 desc->num_sgs = num_sgs; 1047 desc->cyclic = false; 1048 1049 return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags); 1050 } 1051 1052 static u32 stm32_dma_get_remaining_bytes(struct stm32_dma_chan *chan) 1053 { 1054 u32 dma_scr, width, ndtr; 1055 struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); 1056 1057 dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id)); 1058 width = STM32_DMA_SCR_PSIZE_GET(dma_scr); 1059 ndtr = stm32_dma_read(dmadev, STM32_DMA_SNDTR(chan->id)); 1060 1061 return ndtr << width; 1062 } 1063 1064 /** 1065 * stm32_dma_is_current_sg - check that expected sg_req is currently transferred 1066 * @chan: dma channel 1067 * 1068 * This function called when IRQ are disable, checks that the hardware has not 1069 * switched on the next transfer in double buffer mode. The test is done by 1070 * comparing the next_sg memory address with the hardware related register 1071 * (based on CT bit value). 1072 * 1073 * Returns true if expected current transfer is still running or double 1074 * buffer mode is not activated. 1075 */ 1076 static bool stm32_dma_is_current_sg(struct stm32_dma_chan *chan) 1077 { 1078 struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); 1079 struct stm32_dma_sg_req *sg_req; 1080 u32 dma_scr, dma_smar, id; 1081 1082 id = chan->id; 1083 dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(id)); 1084 1085 if (!(dma_scr & STM32_DMA_SCR_DBM)) 1086 return true; 1087 1088 sg_req = &chan->desc->sg_req[chan->next_sg]; 1089 1090 if (dma_scr & STM32_DMA_SCR_CT) { 1091 dma_smar = stm32_dma_read(dmadev, STM32_DMA_SM0AR(id)); 1092 return (dma_smar == sg_req->chan_reg.dma_sm0ar); 1093 } 1094 1095 dma_smar = stm32_dma_read(dmadev, STM32_DMA_SM1AR(id)); 1096 1097 return (dma_smar == sg_req->chan_reg.dma_sm1ar); 1098 } 1099 1100 static size_t stm32_dma_desc_residue(struct stm32_dma_chan *chan, 1101 struct stm32_dma_desc *desc, 1102 u32 next_sg) 1103 { 1104 u32 modulo, burst_size; 1105 u32 residue; 1106 u32 n_sg = next_sg; 1107 struct stm32_dma_sg_req *sg_req = &chan->desc->sg_req[chan->next_sg]; 1108 int i; 1109 1110 /* 1111 * Calculate the residue means compute the descriptors 1112 * information: 1113 * - the sg_req currently transferred 1114 * - the Hardware remaining position in this sg (NDTR bits field). 1115 * 1116 * A race condition may occur if DMA is running in cyclic or double 1117 * buffer mode, since the DMA register are automatically reloaded at end 1118 * of period transfer. The hardware may have switched to the next 1119 * transfer (CT bit updated) just before the position (SxNDTR reg) is 1120 * read. 1121 * In this case the SxNDTR reg could (or not) correspond to the new 1122 * transfer position, and not the expected one. 1123 * The strategy implemented in the stm32 driver is to: 1124 * - read the SxNDTR register 1125 * - crosscheck that hardware is still in current transfer. 1126 * In case of switch, we can assume that the DMA is at the beginning of 1127 * the next transfer. So we approximate the residue in consequence, by 1128 * pointing on the beginning of next transfer. 1129 * 1130 * This race condition doesn't apply for none cyclic mode, as double 1131 * buffer is not used. In such situation registers are updated by the 1132 * software. 1133 */ 1134 1135 residue = stm32_dma_get_remaining_bytes(chan); 1136 1137 if (!stm32_dma_is_current_sg(chan)) { 1138 n_sg++; 1139 if (n_sg == chan->desc->num_sgs) 1140 n_sg = 0; 1141 residue = sg_req->len; 1142 } 1143 1144 /* 1145 * In cyclic mode, for the last period, residue = remaining bytes 1146 * from NDTR, 1147 * else for all other periods in cyclic mode, and in sg mode, 1148 * residue = remaining bytes from NDTR + remaining 1149 * periods/sg to be transferred 1150 */ 1151 if (!chan->desc->cyclic || n_sg != 0) 1152 for (i = n_sg; i < desc->num_sgs; i++) 1153 residue += desc->sg_req[i].len; 1154 1155 if (!chan->mem_burst) 1156 return residue; 1157 1158 burst_size = chan->mem_burst * chan->mem_width; 1159 modulo = residue % burst_size; 1160 if (modulo) 1161 residue = residue - modulo + burst_size; 1162 1163 return residue; 1164 } 1165 1166 static enum dma_status stm32_dma_tx_status(struct dma_chan *c, 1167 dma_cookie_t cookie, 1168 struct dma_tx_state *state) 1169 { 1170 struct stm32_dma_chan *chan = to_stm32_dma_chan(c); 1171 struct virt_dma_desc *vdesc; 1172 enum dma_status status; 1173 unsigned long flags; 1174 u32 residue = 0; 1175 1176 status = dma_cookie_status(c, cookie, state); 1177 if (status == DMA_COMPLETE || !state) 1178 return status; 1179 1180 spin_lock_irqsave(&chan->vchan.lock, flags); 1181 vdesc = vchan_find_desc(&chan->vchan, cookie); 1182 if (chan->desc && cookie == chan->desc->vdesc.tx.cookie) 1183 residue = stm32_dma_desc_residue(chan, chan->desc, 1184 chan->next_sg); 1185 else if (vdesc) 1186 residue = stm32_dma_desc_residue(chan, 1187 to_stm32_dma_desc(vdesc), 0); 1188 dma_set_residue(state, residue); 1189 1190 spin_unlock_irqrestore(&chan->vchan.lock, flags); 1191 1192 return status; 1193 } 1194 1195 static int stm32_dma_alloc_chan_resources(struct dma_chan *c) 1196 { 1197 struct stm32_dma_chan *chan = to_stm32_dma_chan(c); 1198 struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); 1199 int ret; 1200 1201 chan->config_init = false; 1202 1203 ret = pm_runtime_resume_and_get(dmadev->ddev.dev); 1204 if (ret < 0) 1205 return ret; 1206 1207 ret = stm32_dma_disable_chan(chan); 1208 if (ret < 0) 1209 pm_runtime_put(dmadev->ddev.dev); 1210 1211 return ret; 1212 } 1213 1214 static void stm32_dma_free_chan_resources(struct dma_chan *c) 1215 { 1216 struct stm32_dma_chan *chan = to_stm32_dma_chan(c); 1217 struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); 1218 unsigned long flags; 1219 1220 dev_dbg(chan2dev(chan), "Freeing channel %d\n", chan->id); 1221 1222 if (chan->busy) { 1223 spin_lock_irqsave(&chan->vchan.lock, flags); 1224 stm32_dma_stop(chan); 1225 chan->desc = NULL; 1226 spin_unlock_irqrestore(&chan->vchan.lock, flags); 1227 } 1228 1229 pm_runtime_put(dmadev->ddev.dev); 1230 1231 vchan_free_chan_resources(to_virt_chan(c)); 1232 stm32_dma_clear_reg(&chan->chan_reg); 1233 chan->threshold = 0; 1234 } 1235 1236 static void stm32_dma_desc_free(struct virt_dma_desc *vdesc) 1237 { 1238 kfree(container_of(vdesc, struct stm32_dma_desc, vdesc)); 1239 } 1240 1241 static void stm32_dma_set_config(struct stm32_dma_chan *chan, 1242 struct stm32_dma_cfg *cfg) 1243 { 1244 stm32_dma_clear_reg(&chan->chan_reg); 1245 1246 chan->chan_reg.dma_scr = cfg->stream_config & STM32_DMA_SCR_CFG_MASK; 1247 chan->chan_reg.dma_scr |= STM32_DMA_SCR_REQ(cfg->request_line); 1248 1249 /* Enable Interrupts */ 1250 chan->chan_reg.dma_scr |= STM32_DMA_SCR_TEIE | STM32_DMA_SCR_TCIE; 1251 1252 chan->threshold = STM32_DMA_THRESHOLD_FTR_GET(cfg->features); 1253 if (STM32_DMA_DIRECT_MODE_GET(cfg->features)) 1254 chan->threshold = STM32_DMA_FIFO_THRESHOLD_NONE; 1255 } 1256 1257 static struct dma_chan *stm32_dma_of_xlate(struct of_phandle_args *dma_spec, 1258 struct of_dma *ofdma) 1259 { 1260 struct stm32_dma_device *dmadev = ofdma->of_dma_data; 1261 struct device *dev = dmadev->ddev.dev; 1262 struct stm32_dma_cfg cfg; 1263 struct stm32_dma_chan *chan; 1264 struct dma_chan *c; 1265 1266 if (dma_spec->args_count < 4) { 1267 dev_err(dev, "Bad number of cells\n"); 1268 return NULL; 1269 } 1270 1271 cfg.channel_id = dma_spec->args[0]; 1272 cfg.request_line = dma_spec->args[1]; 1273 cfg.stream_config = dma_spec->args[2]; 1274 cfg.features = dma_spec->args[3]; 1275 1276 if (cfg.channel_id >= STM32_DMA_MAX_CHANNELS || 1277 cfg.request_line >= STM32_DMA_MAX_REQUEST_ID) { 1278 dev_err(dev, "Bad channel and/or request id\n"); 1279 return NULL; 1280 } 1281 1282 chan = &dmadev->chan[cfg.channel_id]; 1283 1284 c = dma_get_slave_channel(&chan->vchan.chan); 1285 if (!c) { 1286 dev_err(dev, "No more channels available\n"); 1287 return NULL; 1288 } 1289 1290 stm32_dma_set_config(chan, &cfg); 1291 1292 return c; 1293 } 1294 1295 static const struct of_device_id stm32_dma_of_match[] = { 1296 { .compatible = "st,stm32-dma", }, 1297 { /* sentinel */ }, 1298 }; 1299 MODULE_DEVICE_TABLE(of, stm32_dma_of_match); 1300 1301 static int stm32_dma_probe(struct platform_device *pdev) 1302 { 1303 struct stm32_dma_chan *chan; 1304 struct stm32_dma_device *dmadev; 1305 struct dma_device *dd; 1306 const struct of_device_id *match; 1307 struct resource *res; 1308 struct reset_control *rst; 1309 int i, ret; 1310 1311 match = of_match_device(stm32_dma_of_match, &pdev->dev); 1312 if (!match) { 1313 dev_err(&pdev->dev, "Error: No device match found\n"); 1314 return -ENODEV; 1315 } 1316 1317 dmadev = devm_kzalloc(&pdev->dev, sizeof(*dmadev), GFP_KERNEL); 1318 if (!dmadev) 1319 return -ENOMEM; 1320 1321 dd = &dmadev->ddev; 1322 1323 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1324 dmadev->base = devm_ioremap_resource(&pdev->dev, res); 1325 if (IS_ERR(dmadev->base)) 1326 return PTR_ERR(dmadev->base); 1327 1328 dmadev->clk = devm_clk_get(&pdev->dev, NULL); 1329 if (IS_ERR(dmadev->clk)) 1330 return dev_err_probe(&pdev->dev, PTR_ERR(dmadev->clk), "Can't get clock\n"); 1331 1332 ret = clk_prepare_enable(dmadev->clk); 1333 if (ret < 0) { 1334 dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret); 1335 return ret; 1336 } 1337 1338 dmadev->mem2mem = of_property_read_bool(pdev->dev.of_node, 1339 "st,mem2mem"); 1340 1341 rst = devm_reset_control_get(&pdev->dev, NULL); 1342 if (IS_ERR(rst)) { 1343 ret = PTR_ERR(rst); 1344 if (ret == -EPROBE_DEFER) 1345 goto clk_free; 1346 } else { 1347 reset_control_assert(rst); 1348 udelay(2); 1349 reset_control_deassert(rst); 1350 } 1351 1352 dma_set_max_seg_size(&pdev->dev, STM32_DMA_ALIGNED_MAX_DATA_ITEMS); 1353 1354 dma_cap_set(DMA_SLAVE, dd->cap_mask); 1355 dma_cap_set(DMA_PRIVATE, dd->cap_mask); 1356 dma_cap_set(DMA_CYCLIC, dd->cap_mask); 1357 dd->device_alloc_chan_resources = stm32_dma_alloc_chan_resources; 1358 dd->device_free_chan_resources = stm32_dma_free_chan_resources; 1359 dd->device_tx_status = stm32_dma_tx_status; 1360 dd->device_issue_pending = stm32_dma_issue_pending; 1361 dd->device_prep_slave_sg = stm32_dma_prep_slave_sg; 1362 dd->device_prep_dma_cyclic = stm32_dma_prep_dma_cyclic; 1363 dd->device_config = stm32_dma_slave_config; 1364 dd->device_terminate_all = stm32_dma_terminate_all; 1365 dd->device_synchronize = stm32_dma_synchronize; 1366 dd->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | 1367 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | 1368 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); 1369 dd->dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | 1370 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | 1371 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); 1372 dd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); 1373 dd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; 1374 dd->copy_align = DMAENGINE_ALIGN_32_BYTES; 1375 dd->max_burst = STM32_DMA_MAX_BURST; 1376 dd->descriptor_reuse = true; 1377 dd->dev = &pdev->dev; 1378 INIT_LIST_HEAD(&dd->channels); 1379 1380 if (dmadev->mem2mem) { 1381 dma_cap_set(DMA_MEMCPY, dd->cap_mask); 1382 dd->device_prep_dma_memcpy = stm32_dma_prep_dma_memcpy; 1383 dd->directions |= BIT(DMA_MEM_TO_MEM); 1384 } 1385 1386 for (i = 0; i < STM32_DMA_MAX_CHANNELS; i++) { 1387 chan = &dmadev->chan[i]; 1388 chan->id = i; 1389 chan->vchan.desc_free = stm32_dma_desc_free; 1390 vchan_init(&chan->vchan, dd); 1391 } 1392 1393 ret = dma_async_device_register(dd); 1394 if (ret) 1395 goto clk_free; 1396 1397 for (i = 0; i < STM32_DMA_MAX_CHANNELS; i++) { 1398 chan = &dmadev->chan[i]; 1399 ret = platform_get_irq(pdev, i); 1400 if (ret < 0) 1401 goto err_unregister; 1402 chan->irq = ret; 1403 1404 ret = devm_request_irq(&pdev->dev, chan->irq, 1405 stm32_dma_chan_irq, 0, 1406 dev_name(chan2dev(chan)), chan); 1407 if (ret) { 1408 dev_err(&pdev->dev, 1409 "request_irq failed with err %d channel %d\n", 1410 ret, i); 1411 goto err_unregister; 1412 } 1413 } 1414 1415 ret = of_dma_controller_register(pdev->dev.of_node, 1416 stm32_dma_of_xlate, dmadev); 1417 if (ret < 0) { 1418 dev_err(&pdev->dev, 1419 "STM32 DMA DMA OF registration failed %d\n", ret); 1420 goto err_unregister; 1421 } 1422 1423 platform_set_drvdata(pdev, dmadev); 1424 1425 pm_runtime_set_active(&pdev->dev); 1426 pm_runtime_enable(&pdev->dev); 1427 pm_runtime_get_noresume(&pdev->dev); 1428 pm_runtime_put(&pdev->dev); 1429 1430 dev_info(&pdev->dev, "STM32 DMA driver registered\n"); 1431 1432 return 0; 1433 1434 err_unregister: 1435 dma_async_device_unregister(dd); 1436 clk_free: 1437 clk_disable_unprepare(dmadev->clk); 1438 1439 return ret; 1440 } 1441 1442 #ifdef CONFIG_PM 1443 static int stm32_dma_runtime_suspend(struct device *dev) 1444 { 1445 struct stm32_dma_device *dmadev = dev_get_drvdata(dev); 1446 1447 clk_disable_unprepare(dmadev->clk); 1448 1449 return 0; 1450 } 1451 1452 static int stm32_dma_runtime_resume(struct device *dev) 1453 { 1454 struct stm32_dma_device *dmadev = dev_get_drvdata(dev); 1455 int ret; 1456 1457 ret = clk_prepare_enable(dmadev->clk); 1458 if (ret) { 1459 dev_err(dev, "failed to prepare_enable clock\n"); 1460 return ret; 1461 } 1462 1463 return 0; 1464 } 1465 #endif 1466 1467 #ifdef CONFIG_PM_SLEEP 1468 static int stm32_dma_suspend(struct device *dev) 1469 { 1470 struct stm32_dma_device *dmadev = dev_get_drvdata(dev); 1471 int id, ret, scr; 1472 1473 ret = pm_runtime_resume_and_get(dev); 1474 if (ret < 0) 1475 return ret; 1476 1477 for (id = 0; id < STM32_DMA_MAX_CHANNELS; id++) { 1478 scr = stm32_dma_read(dmadev, STM32_DMA_SCR(id)); 1479 if (scr & STM32_DMA_SCR_EN) { 1480 dev_warn(dev, "Suspend is prevented by Chan %i\n", id); 1481 return -EBUSY; 1482 } 1483 } 1484 1485 pm_runtime_put_sync(dev); 1486 1487 pm_runtime_force_suspend(dev); 1488 1489 return 0; 1490 } 1491 1492 static int stm32_dma_resume(struct device *dev) 1493 { 1494 return pm_runtime_force_resume(dev); 1495 } 1496 #endif 1497 1498 static const struct dev_pm_ops stm32_dma_pm_ops = { 1499 SET_SYSTEM_SLEEP_PM_OPS(stm32_dma_suspend, stm32_dma_resume) 1500 SET_RUNTIME_PM_OPS(stm32_dma_runtime_suspend, 1501 stm32_dma_runtime_resume, NULL) 1502 }; 1503 1504 static struct platform_driver stm32_dma_driver = { 1505 .driver = { 1506 .name = "stm32-dma", 1507 .of_match_table = stm32_dma_of_match, 1508 .pm = &stm32_dma_pm_ops, 1509 }, 1510 .probe = stm32_dma_probe, 1511 }; 1512 1513 static int __init stm32_dma_init(void) 1514 { 1515 return platform_driver_register(&stm32_dma_driver); 1516 } 1517 subsys_initcall(stm32_dma_init); 1518