xref: /openbmc/linux/drivers/dma/ste_dma40_ll.h (revision 9f380456)
1 /*
2  * Copyright (C) ST-Ericsson SA 2007-2010
3  * Author: Per Friden <per.friden@stericsson.com> for ST-Ericsson SA
4  * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson SA
5  * License terms: GNU General Public License (GPL) version 2
6  */
7 #ifndef STE_DMA40_LL_H
8 #define STE_DMA40_LL_H
9 
10 #define D40_DREG_PCBASE		0x400
11 #define D40_DREG_PCDELTA	(8 * 4)
12 #define D40_LLI_ALIGN		16 /* LLI alignment must be 16 bytes. */
13 
14 #define D40_LCPA_CHAN_SIZE 32
15 #define D40_LCPA_CHAN_DST_DELTA 16
16 
17 #define D40_TYPE_TO_GROUP(type) (type / 16)
18 #define D40_TYPE_TO_EVENT(type) (type % 16)
19 #define D40_GROUP_SIZE 8
20 #define D40_PHYS_TO_GROUP(phys) ((phys & (D40_GROUP_SIZE - 1)) / 2)
21 
22 /* Most bits of the CFG register are the same in log as in phy mode */
23 #define D40_SREG_CFG_MST_POS		15
24 #define D40_SREG_CFG_TIM_POS		14
25 #define D40_SREG_CFG_EIM_POS		13
26 #define D40_SREG_CFG_LOG_INCR_POS	12
27 #define D40_SREG_CFG_PHY_PEN_POS	12
28 #define D40_SREG_CFG_PSIZE_POS		10
29 #define D40_SREG_CFG_ESIZE_POS		 8
30 #define D40_SREG_CFG_PRI_POS		 7
31 #define D40_SREG_CFG_LBE_POS		 6
32 #define D40_SREG_CFG_LOG_GIM_POS	 5
33 #define D40_SREG_CFG_LOG_MFU_POS	 4
34 #define D40_SREG_CFG_PHY_TM_POS		 4
35 #define D40_SREG_CFG_PHY_EVTL_POS	 0
36 
37 
38 /* Standard channel parameters - basic mode (element register) */
39 #define D40_SREG_ELEM_PHY_ECNT_POS	16
40 #define D40_SREG_ELEM_PHY_EIDX_POS	 0
41 
42 #define D40_SREG_ELEM_PHY_ECNT_MASK	(0xFFFF << D40_SREG_ELEM_PHY_ECNT_POS)
43 
44 /* Standard channel parameters - basic mode (Link register) */
45 #define D40_SREG_LNK_PHY_TCP_POS	0
46 #define D40_SREG_LNK_PHY_LMP_POS	1
47 #define D40_SREG_LNK_PHY_PRE_POS	2
48 /*
49  * Source  destination link address. Contains the
50  * 29-bit byte word aligned address of the reload area.
51  */
52 #define D40_SREG_LNK_PHYS_LNK_MASK	0xFFFFFFF8UL
53 
54 /* Standard basic channel logical mode */
55 
56 /* Element register */
57 #define D40_SREG_ELEM_LOG_ECNT_POS	16
58 #define D40_SREG_ELEM_LOG_LIDX_POS	 8
59 #define D40_SREG_ELEM_LOG_LOS_POS	 1
60 #define D40_SREG_ELEM_LOG_TCP_POS	 0
61 
62 #define D40_SREG_ELEM_LOG_LIDX_MASK	(0xFF << D40_SREG_ELEM_LOG_LIDX_POS)
63 
64 /* Link register */
65 #define D40_EVENTLINE_POS(i)		(2 * i)
66 #define D40_EVENTLINE_MASK(i)		(0x3 << D40_EVENTLINE_POS(i))
67 
68 /* Standard basic channel logical params in memory */
69 
70 /* LCSP0 */
71 #define D40_MEM_LCSP0_ECNT_POS		16
72 #define D40_MEM_LCSP0_SPTR_POS		 0
73 
74 #define D40_MEM_LCSP0_ECNT_MASK		(0xFFFF << D40_MEM_LCSP0_ECNT_POS)
75 #define D40_MEM_LCSP0_SPTR_MASK		(0xFFFF << D40_MEM_LCSP0_SPTR_POS)
76 
77 /* LCSP1 */
78 #define D40_MEM_LCSP1_SPTR_POS		16
79 #define D40_MEM_LCSP1_SCFG_MST_POS	15
80 #define D40_MEM_LCSP1_SCFG_TIM_POS	14
81 #define D40_MEM_LCSP1_SCFG_EIM_POS	13
82 #define D40_MEM_LCSP1_SCFG_INCR_POS	12
83 #define D40_MEM_LCSP1_SCFG_PSIZE_POS	10
84 #define D40_MEM_LCSP1_SCFG_ESIZE_POS	 8
85 #define D40_MEM_LCSP1_SLOS_POS		 1
86 #define D40_MEM_LCSP1_STCP_POS		 0
87 
88 #define D40_MEM_LCSP1_SPTR_MASK		(0xFFFF << D40_MEM_LCSP1_SPTR_POS)
89 #define D40_MEM_LCSP1_SCFG_TIM_MASK	(0x1 << D40_MEM_LCSP1_SCFG_TIM_POS)
90 #define D40_MEM_LCSP1_SCFG_INCR_MASK	(0x1 << D40_MEM_LCSP1_SCFG_INCR_POS)
91 #define D40_MEM_LCSP1_SCFG_PSIZE_MASK	(0x3 << D40_MEM_LCSP1_SCFG_PSIZE_POS)
92 #define D40_MEM_LCSP1_SLOS_MASK		(0x7F << D40_MEM_LCSP1_SLOS_POS)
93 #define D40_MEM_LCSP1_STCP_MASK		(0x1 << D40_MEM_LCSP1_STCP_POS)
94 
95 /* LCSP2 */
96 #define D40_MEM_LCSP2_ECNT_POS		16
97 
98 #define D40_MEM_LCSP2_ECNT_MASK		(0xFFFF << D40_MEM_LCSP2_ECNT_POS)
99 
100 /* LCSP3 */
101 #define D40_MEM_LCSP3_DCFG_MST_POS	15
102 #define D40_MEM_LCSP3_DCFG_TIM_POS	14
103 #define D40_MEM_LCSP3_DCFG_EIM_POS	13
104 #define D40_MEM_LCSP3_DCFG_INCR_POS	12
105 #define D40_MEM_LCSP3_DCFG_PSIZE_POS	10
106 #define D40_MEM_LCSP3_DCFG_ESIZE_POS	 8
107 #define D40_MEM_LCSP3_DLOS_POS		 1
108 #define D40_MEM_LCSP3_DTCP_POS		 0
109 
110 #define D40_MEM_LCSP3_DLOS_MASK		(0x7F << D40_MEM_LCSP3_DLOS_POS)
111 #define D40_MEM_LCSP3_DTCP_MASK		(0x1 << D40_MEM_LCSP3_DTCP_POS)
112 
113 
114 /* Standard channel parameter register offsets */
115 #define D40_CHAN_REG_SSCFG	0x00
116 #define D40_CHAN_REG_SSELT	0x04
117 #define D40_CHAN_REG_SSPTR	0x08
118 #define D40_CHAN_REG_SSLNK	0x0C
119 #define D40_CHAN_REG_SDCFG	0x10
120 #define D40_CHAN_REG_SDELT	0x14
121 #define D40_CHAN_REG_SDPTR	0x18
122 #define D40_CHAN_REG_SDLNK	0x1C
123 
124 /* DMA Register Offsets */
125 #define D40_DREG_GCC		0x000
126 #define D40_DREG_GCC_ENA	0x1
127 /* This assumes that there are only 4 event groups */
128 #define D40_DREG_GCC_ENABLE_ALL	0xff01
129 #define D40_DREG_GCC_EVTGRP_POS 8
130 #define D40_DREG_GCC_SRC 0
131 #define D40_DREG_GCC_DST 1
132 #define D40_DREG_GCC_EVTGRP_ENA(x, y) \
133 	(1 << (D40_DREG_GCC_EVTGRP_POS + 2 * x + y))
134 
135 #define D40_DREG_PRTYP		0x004
136 #define D40_DREG_PRSME		0x008
137 #define D40_DREG_PRSMO		0x00C
138 #define D40_DREG_PRMSE		0x010
139 #define D40_DREG_PRMSO		0x014
140 #define D40_DREG_PRMOE		0x018
141 #define D40_DREG_PRMOO		0x01C
142 #define D40_DREG_PRMO_PCHAN_BASIC		0x1
143 #define D40_DREG_PRMO_PCHAN_MODULO		0x2
144 #define D40_DREG_PRMO_PCHAN_DOUBLE_DST		0x3
145 #define D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG	0x1
146 #define D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY	0x2
147 #define D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG	0x3
148 
149 #define D40_DREG_LCPA		0x020
150 #define D40_DREG_LCLA		0x024
151 #define D40_DREG_ACTIVE		0x050
152 #define D40_DREG_ACTIVO		0x054
153 #define D40_DREG_FSEB1		0x058
154 #define D40_DREG_FSEB2		0x05C
155 #define D40_DREG_PCMIS		0x060
156 #define D40_DREG_PCICR		0x064
157 #define D40_DREG_PCTIS		0x068
158 #define D40_DREG_PCEIS		0x06C
159 #define D40_DREG_LCMIS0		0x080
160 #define D40_DREG_LCMIS1		0x084
161 #define D40_DREG_LCMIS2		0x088
162 #define D40_DREG_LCMIS3		0x08C
163 #define D40_DREG_LCICR0		0x090
164 #define D40_DREG_LCICR1		0x094
165 #define D40_DREG_LCICR2		0x098
166 #define D40_DREG_LCICR3		0x09C
167 #define D40_DREG_LCTIS0		0x0A0
168 #define D40_DREG_LCTIS1		0x0A4
169 #define D40_DREG_LCTIS2		0x0A8
170 #define D40_DREG_LCTIS3		0x0AC
171 #define D40_DREG_LCEIS0		0x0B0
172 #define D40_DREG_LCEIS1		0x0B4
173 #define D40_DREG_LCEIS2		0x0B8
174 #define D40_DREG_LCEIS3		0x0BC
175 #define D40_DREG_PSEG1		0x110
176 #define D40_DREG_PSEG2		0x114
177 #define D40_DREG_PSEG3		0x118
178 #define D40_DREG_PSEG4		0x11C
179 #define D40_DREG_PCEG1		0x120
180 #define D40_DREG_PCEG2		0x124
181 #define D40_DREG_PCEG3		0x128
182 #define D40_DREG_PCEG4		0x12C
183 #define D40_DREG_RSEG1		0x130
184 #define D40_DREG_RSEG2		0x134
185 #define D40_DREG_RSEG3		0x138
186 #define D40_DREG_RSEG4		0x13C
187 #define D40_DREG_RCEG1		0x140
188 #define D40_DREG_RCEG2		0x144
189 #define D40_DREG_RCEG3		0x148
190 #define D40_DREG_RCEG4		0x14C
191 #define D40_DREG_STFU		0xFC8
192 #define D40_DREG_ICFG		0xFCC
193 #define D40_DREG_PERIPHID0	0xFE0
194 #define D40_DREG_PERIPHID1	0xFE4
195 #define D40_DREG_PERIPHID2	0xFE8
196 #define D40_DREG_PERIPHID3	0xFEC
197 #define D40_DREG_CELLID0	0xFF0
198 #define D40_DREG_CELLID1	0xFF4
199 #define D40_DREG_CELLID2	0xFF8
200 #define D40_DREG_CELLID3	0xFFC
201 
202 /* LLI related structures */
203 
204 /**
205  * struct d40_phy_lli - The basic configration register for each physical
206  * channel.
207  *
208  * @reg_cfg: The configuration register.
209  * @reg_elt: The element register.
210  * @reg_ptr: The pointer register.
211  * @reg_lnk: The link register.
212  *
213  * These registers are set up for both physical and logical transfers
214  * Note that the bit in each register means differently in logical and
215  * physical(standard) mode.
216  *
217  * This struct must be 16 bytes aligned, and only contain physical registers
218  * since it will be directly accessed by the DMA.
219  */
220 struct d40_phy_lli {
221 	u32 reg_cfg;
222 	u32 reg_elt;
223 	u32 reg_ptr;
224 	u32 reg_lnk;
225 };
226 
227 /**
228  * struct d40_phy_lli_bidir - struct for a transfer.
229  *
230  * @src: Register settings for src channel.
231  * @dst: Register settings for dst channel.
232  *
233  * All DMA transfers have a source and a destination.
234  */
235 
236 struct d40_phy_lli_bidir {
237 	struct d40_phy_lli	*src;
238 	struct d40_phy_lli	*dst;
239 };
240 
241 
242 /**
243  * struct d40_log_lli - logical lli configuration
244  *
245  * @lcsp02: Either maps to register lcsp0 if src or lcsp2 if dst.
246  * @lcsp13: Either maps to register lcsp1 if src or lcsp3 if dst.
247  *
248  * This struct must be 8 bytes aligned since it will be accessed directy by
249  * the DMA. Never add any none hw mapped registers to this struct.
250  */
251 
252 struct d40_log_lli {
253 	u32 lcsp02;
254 	u32 lcsp13;
255 };
256 
257 /**
258  * struct d40_log_lli_bidir - For both src and dst
259  *
260  * @src: pointer to src lli configuration.
261  * @dst: pointer to dst lli configuration.
262  *
263  * You always have a src and a dst when doing DMA transfers.
264  */
265 
266 struct d40_log_lli_bidir {
267 	struct d40_log_lli *src;
268 	struct d40_log_lli *dst;
269 };
270 
271 /**
272  * struct d40_log_lli_full - LCPA layout
273  *
274  * @lcsp0: Logical Channel Standard Param 0 - Src.
275  * @lcsp1: Logical Channel Standard Param 1 - Src.
276  * @lcsp2: Logical Channel Standard Param 2 - Dst.
277  * @lcsp3: Logical Channel Standard Param 3 - Dst.
278  *
279  * This struct maps to LCPA physical memory layout. Must map to
280  * the hw.
281  */
282 struct d40_log_lli_full {
283 	u32 lcsp0;
284 	u32 lcsp1;
285 	u32 lcsp2;
286 	u32 lcsp3;
287 };
288 
289 /**
290  * struct d40_def_lcsp - Default LCSP1 and LCSP3 settings
291  *
292  * @lcsp3: The default configuration for dst.
293  * @lcsp1: The default configuration for src.
294  */
295 struct d40_def_lcsp {
296 	u32 lcsp3;
297 	u32 lcsp1;
298 };
299 
300 /* Physical channels */
301 
302 enum d40_lli_flags {
303 	LLI_ADDR_INC	= 1 << 0,
304 	LLI_TERM_INT	= 1 << 1,
305 	LLI_CYCLIC	= 1 << 2,
306 	LLI_LAST_LINK	= 1 << 3,
307 };
308 
309 void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
310 		 u32 *src_cfg,
311 		 u32 *dst_cfg,
312 		 bool is_log);
313 
314 void d40_log_cfg(struct stedma40_chan_cfg *cfg,
315 		 u32 *lcsp1,
316 		 u32 *lcsp2);
317 
318 int d40_phy_sg_to_lli(struct scatterlist *sg,
319 		      int sg_len,
320 		      dma_addr_t target,
321 		      struct d40_phy_lli *lli,
322 		      dma_addr_t lli_phys,
323 		      u32 reg_cfg,
324 		      struct stedma40_half_channel_info *info,
325 		      struct stedma40_half_channel_info *otherinfo,
326 		      unsigned long flags);
327 
328 /* Logical channels */
329 
330 int d40_log_sg_to_lli(struct scatterlist *sg,
331 		      int sg_len,
332 		      dma_addr_t dev_addr,
333 		      struct d40_log_lli *lli_sg,
334 		      u32 lcsp13, /* src or dst*/
335 		      u32 data_width1, u32 data_width2);
336 
337 void d40_log_lli_lcpa_write(struct d40_log_lli_full *lcpa,
338 			    struct d40_log_lli *lli_dst,
339 			    struct d40_log_lli *lli_src,
340 			    int next, unsigned int flags);
341 
342 void d40_log_lli_lcla_write(struct d40_log_lli *lcla,
343 			    struct d40_log_lli *lli_dst,
344 			    struct d40_log_lli *lli_src,
345 			    int next, unsigned int flags);
346 
347 #endif /* STE_DMA40_LLI_H */
348