xref: /openbmc/linux/drivers/dma/ste_dma40.c (revision 657c45b3)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) Ericsson AB 2007-2008
4  * Copyright (C) ST-Ericsson SA 2008-2010
5  * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
6  * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
7  */
8 
9 #include <linux/dma-mapping.h>
10 #include <linux/kernel.h>
11 #include <linux/slab.h>
12 #include <linux/export.h>
13 #include <linux/dmaengine.h>
14 #include <linux/platform_device.h>
15 #include <linux/clk.h>
16 #include <linux/delay.h>
17 #include <linux/log2.h>
18 #include <linux/pm.h>
19 #include <linux/pm_runtime.h>
20 #include <linux/err.h>
21 #include <linux/of.h>
22 #include <linux/of_address.h>
23 #include <linux/of_dma.h>
24 #include <linux/amba/bus.h>
25 #include <linux/regulator/consumer.h>
26 
27 #include "dmaengine.h"
28 #include "ste_dma40.h"
29 #include "ste_dma40_ll.h"
30 
31 /**
32  * struct stedma40_platform_data - Configuration struct for the dma device.
33  *
34  * @dev_tx: mapping between destination event line and io address
35  * @dev_rx: mapping between source event line and io address
36  * @disabled_channels: A vector, ending with -1, that marks physical channels
37  * that are for different reasons not available for the driver.
38  * @soft_lli_chans: A vector, that marks physical channels will use LLI by SW
39  * which avoids HW bug that exists in some versions of the controller.
40  * SoftLLI introduces relink overhead that could impact performace for
41  * certain use cases.
42  * @num_of_soft_lli_chans: The number of channels that needs to be configured
43  * to use SoftLLI.
44  * @use_esram_lcla: flag for mapping the lcla into esram region
45  * @num_of_memcpy_chans: The number of channels reserved for memcpy.
46  * @num_of_phy_chans: The number of physical channels implemented in HW.
47  * 0 means reading the number of channels from DMA HW but this is only valid
48  * for 'multiple of 4' channels, like 8.
49  */
50 struct stedma40_platform_data {
51 	int				 disabled_channels[STEDMA40_MAX_PHYS];
52 	int				*soft_lli_chans;
53 	int				 num_of_soft_lli_chans;
54 	bool				 use_esram_lcla;
55 	int				 num_of_memcpy_chans;
56 	int				 num_of_phy_chans;
57 };
58 
59 #define D40_NAME "dma40"
60 
61 #define D40_PHY_CHAN -1
62 
63 /* For masking out/in 2 bit channel positions */
64 #define D40_CHAN_POS(chan)  (2 * (chan / 2))
65 #define D40_CHAN_POS_MASK(chan) (0x3 << D40_CHAN_POS(chan))
66 
67 /* Maximum iterations taken before giving up suspending a channel */
68 #define D40_SUSPEND_MAX_IT 500
69 
70 /* Milliseconds */
71 #define DMA40_AUTOSUSPEND_DELAY	100
72 
73 /* Hardware requirement on LCLA alignment */
74 #define LCLA_ALIGNMENT 0x40000
75 
76 /* Max number of links per event group */
77 #define D40_LCLA_LINK_PER_EVENT_GRP 128
78 #define D40_LCLA_END D40_LCLA_LINK_PER_EVENT_GRP
79 
80 /* Max number of logical channels per physical channel */
81 #define D40_MAX_LOG_CHAN_PER_PHY 32
82 
83 /* Attempts before giving up to trying to get pages that are aligned */
84 #define MAX_LCLA_ALLOC_ATTEMPTS 256
85 
86 /* Bit markings for allocation map */
87 #define D40_ALLOC_FREE		BIT(31)
88 #define D40_ALLOC_PHY		BIT(30)
89 #define D40_ALLOC_LOG_FREE	0
90 
91 #define D40_MEMCPY_MAX_CHANS	8
92 
93 /* Reserved event lines for memcpy only. */
94 #define DB8500_DMA_MEMCPY_EV_0	51
95 #define DB8500_DMA_MEMCPY_EV_1	56
96 #define DB8500_DMA_MEMCPY_EV_2	57
97 #define DB8500_DMA_MEMCPY_EV_3	58
98 #define DB8500_DMA_MEMCPY_EV_4	59
99 #define DB8500_DMA_MEMCPY_EV_5	60
100 
101 static int dma40_memcpy_channels[] = {
102 	DB8500_DMA_MEMCPY_EV_0,
103 	DB8500_DMA_MEMCPY_EV_1,
104 	DB8500_DMA_MEMCPY_EV_2,
105 	DB8500_DMA_MEMCPY_EV_3,
106 	DB8500_DMA_MEMCPY_EV_4,
107 	DB8500_DMA_MEMCPY_EV_5,
108 };
109 
110 /* Default configuration for physical memcpy */
111 static const struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
112 	.mode = STEDMA40_MODE_PHYSICAL,
113 	.dir = DMA_MEM_TO_MEM,
114 
115 	.src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
116 	.src_info.psize = STEDMA40_PSIZE_PHY_1,
117 	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
118 
119 	.dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
120 	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
121 	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
122 };
123 
124 /* Default configuration for logical memcpy */
125 static const struct stedma40_chan_cfg dma40_memcpy_conf_log = {
126 	.mode = STEDMA40_MODE_LOGICAL,
127 	.dir = DMA_MEM_TO_MEM,
128 
129 	.src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
130 	.src_info.psize = STEDMA40_PSIZE_LOG_1,
131 	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
132 
133 	.dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
134 	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
135 	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
136 };
137 
138 /**
139  * enum d40_command - The different commands and/or statuses.
140  *
141  * @D40_DMA_STOP: DMA channel command STOP or status STOPPED,
142  * @D40_DMA_RUN: The DMA channel is RUNNING of the command RUN.
143  * @D40_DMA_SUSPEND_REQ: Request the DMA to SUSPEND as soon as possible.
144  * @D40_DMA_SUSPENDED: The DMA channel is SUSPENDED.
145  */
146 enum d40_command {
147 	D40_DMA_STOP		= 0,
148 	D40_DMA_RUN		= 1,
149 	D40_DMA_SUSPEND_REQ	= 2,
150 	D40_DMA_SUSPENDED	= 3
151 };
152 
153 /*
154  * enum d40_events - The different Event Enables for the event lines.
155  *
156  * @D40_DEACTIVATE_EVENTLINE: De-activate Event line, stopping the logical chan.
157  * @D40_ACTIVATE_EVENTLINE: Activate the Event line, to start a logical chan.
158  * @D40_SUSPEND_REQ_EVENTLINE: Requesting for suspending a event line.
159  * @D40_ROUND_EVENTLINE: Status check for event line.
160  */
161 
162 enum d40_events {
163 	D40_DEACTIVATE_EVENTLINE	= 0,
164 	D40_ACTIVATE_EVENTLINE		= 1,
165 	D40_SUSPEND_REQ_EVENTLINE	= 2,
166 	D40_ROUND_EVENTLINE		= 3
167 };
168 
169 /*
170  * These are the registers that has to be saved and later restored
171  * when the DMA hw is powered off.
172  * TODO: Add save/restore of D40_DREG_GCC on dma40 v3 or later, if that works.
173  */
174 static __maybe_unused u32 d40_backup_regs[] = {
175 	D40_DREG_LCPA,
176 	D40_DREG_LCLA,
177 	D40_DREG_PRMSE,
178 	D40_DREG_PRMSO,
179 	D40_DREG_PRMOE,
180 	D40_DREG_PRMOO,
181 };
182 
183 #define BACKUP_REGS_SZ ARRAY_SIZE(d40_backup_regs)
184 
185 /*
186  * since 9540 and 8540 has the same HW revision
187  * use v4a for 9540 or ealier
188  * use v4b for 8540 or later
189  * HW revision:
190  * DB8500ed has revision 0
191  * DB8500v1 has revision 2
192  * DB8500v2 has revision 3
193  * AP9540v1 has revision 4
194  * DB8540v1 has revision 4
195  * TODO: Check if all these registers have to be saved/restored on dma40 v4a
196  */
197 static u32 d40_backup_regs_v4a[] = {
198 	D40_DREG_PSEG1,
199 	D40_DREG_PSEG2,
200 	D40_DREG_PSEG3,
201 	D40_DREG_PSEG4,
202 	D40_DREG_PCEG1,
203 	D40_DREG_PCEG2,
204 	D40_DREG_PCEG3,
205 	D40_DREG_PCEG4,
206 	D40_DREG_RSEG1,
207 	D40_DREG_RSEG2,
208 	D40_DREG_RSEG3,
209 	D40_DREG_RSEG4,
210 	D40_DREG_RCEG1,
211 	D40_DREG_RCEG2,
212 	D40_DREG_RCEG3,
213 	D40_DREG_RCEG4,
214 };
215 
216 #define BACKUP_REGS_SZ_V4A ARRAY_SIZE(d40_backup_regs_v4a)
217 
218 static u32 d40_backup_regs_v4b[] = {
219 	D40_DREG_CPSEG1,
220 	D40_DREG_CPSEG2,
221 	D40_DREG_CPSEG3,
222 	D40_DREG_CPSEG4,
223 	D40_DREG_CPSEG5,
224 	D40_DREG_CPCEG1,
225 	D40_DREG_CPCEG2,
226 	D40_DREG_CPCEG3,
227 	D40_DREG_CPCEG4,
228 	D40_DREG_CPCEG5,
229 	D40_DREG_CRSEG1,
230 	D40_DREG_CRSEG2,
231 	D40_DREG_CRSEG3,
232 	D40_DREG_CRSEG4,
233 	D40_DREG_CRSEG5,
234 	D40_DREG_CRCEG1,
235 	D40_DREG_CRCEG2,
236 	D40_DREG_CRCEG3,
237 	D40_DREG_CRCEG4,
238 	D40_DREG_CRCEG5,
239 };
240 
241 #define BACKUP_REGS_SZ_V4B ARRAY_SIZE(d40_backup_regs_v4b)
242 
243 static __maybe_unused u32 d40_backup_regs_chan[] = {
244 	D40_CHAN_REG_SSCFG,
245 	D40_CHAN_REG_SSELT,
246 	D40_CHAN_REG_SSPTR,
247 	D40_CHAN_REG_SSLNK,
248 	D40_CHAN_REG_SDCFG,
249 	D40_CHAN_REG_SDELT,
250 	D40_CHAN_REG_SDPTR,
251 	D40_CHAN_REG_SDLNK,
252 };
253 
254 #define BACKUP_REGS_SZ_MAX ((BACKUP_REGS_SZ_V4A > BACKUP_REGS_SZ_V4B) ? \
255 			     BACKUP_REGS_SZ_V4A : BACKUP_REGS_SZ_V4B)
256 
257 /**
258  * struct d40_interrupt_lookup - lookup table for interrupt handler
259  *
260  * @src: Interrupt mask register.
261  * @clr: Interrupt clear register.
262  * @is_error: true if this is an error interrupt.
263  * @offset: start delta in the lookup_log_chans in d40_base. If equals to
264  * D40_PHY_CHAN, the lookup_phy_chans shall be used instead.
265  */
266 struct d40_interrupt_lookup {
267 	u32 src;
268 	u32 clr;
269 	bool is_error;
270 	int offset;
271 };
272 
273 
274 static struct d40_interrupt_lookup il_v4a[] = {
275 	{D40_DREG_LCTIS0, D40_DREG_LCICR0, false,  0},
276 	{D40_DREG_LCTIS1, D40_DREG_LCICR1, false, 32},
277 	{D40_DREG_LCTIS2, D40_DREG_LCICR2, false, 64},
278 	{D40_DREG_LCTIS3, D40_DREG_LCICR3, false, 96},
279 	{D40_DREG_LCEIS0, D40_DREG_LCICR0, true,   0},
280 	{D40_DREG_LCEIS1, D40_DREG_LCICR1, true,  32},
281 	{D40_DREG_LCEIS2, D40_DREG_LCICR2, true,  64},
282 	{D40_DREG_LCEIS3, D40_DREG_LCICR3, true,  96},
283 	{D40_DREG_PCTIS,  D40_DREG_PCICR,  false, D40_PHY_CHAN},
284 	{D40_DREG_PCEIS,  D40_DREG_PCICR,  true,  D40_PHY_CHAN},
285 };
286 
287 static struct d40_interrupt_lookup il_v4b[] = {
288 	{D40_DREG_CLCTIS1, D40_DREG_CLCICR1, false,  0},
289 	{D40_DREG_CLCTIS2, D40_DREG_CLCICR2, false, 32},
290 	{D40_DREG_CLCTIS3, D40_DREG_CLCICR3, false, 64},
291 	{D40_DREG_CLCTIS4, D40_DREG_CLCICR4, false, 96},
292 	{D40_DREG_CLCTIS5, D40_DREG_CLCICR5, false, 128},
293 	{D40_DREG_CLCEIS1, D40_DREG_CLCICR1, true,   0},
294 	{D40_DREG_CLCEIS2, D40_DREG_CLCICR2, true,  32},
295 	{D40_DREG_CLCEIS3, D40_DREG_CLCICR3, true,  64},
296 	{D40_DREG_CLCEIS4, D40_DREG_CLCICR4, true,  96},
297 	{D40_DREG_CLCEIS5, D40_DREG_CLCICR5, true,  128},
298 	{D40_DREG_CPCTIS,  D40_DREG_CPCICR,  false, D40_PHY_CHAN},
299 	{D40_DREG_CPCEIS,  D40_DREG_CPCICR,  true,  D40_PHY_CHAN},
300 };
301 
302 /**
303  * struct d40_reg_val - simple lookup struct
304  *
305  * @reg: The register.
306  * @val: The value that belongs to the register in reg.
307  */
308 struct d40_reg_val {
309 	unsigned int reg;
310 	unsigned int val;
311 };
312 
313 static __initdata struct d40_reg_val dma_init_reg_v4a[] = {
314 	/* Clock every part of the DMA block from start */
315 	{ .reg = D40_DREG_GCC,    .val = D40_DREG_GCC_ENABLE_ALL},
316 
317 	/* Interrupts on all logical channels */
318 	{ .reg = D40_DREG_LCMIS0, .val = 0xFFFFFFFF},
319 	{ .reg = D40_DREG_LCMIS1, .val = 0xFFFFFFFF},
320 	{ .reg = D40_DREG_LCMIS2, .val = 0xFFFFFFFF},
321 	{ .reg = D40_DREG_LCMIS3, .val = 0xFFFFFFFF},
322 	{ .reg = D40_DREG_LCICR0, .val = 0xFFFFFFFF},
323 	{ .reg = D40_DREG_LCICR1, .val = 0xFFFFFFFF},
324 	{ .reg = D40_DREG_LCICR2, .val = 0xFFFFFFFF},
325 	{ .reg = D40_DREG_LCICR3, .val = 0xFFFFFFFF},
326 	{ .reg = D40_DREG_LCTIS0, .val = 0xFFFFFFFF},
327 	{ .reg = D40_DREG_LCTIS1, .val = 0xFFFFFFFF},
328 	{ .reg = D40_DREG_LCTIS2, .val = 0xFFFFFFFF},
329 	{ .reg = D40_DREG_LCTIS3, .val = 0xFFFFFFFF}
330 };
331 static __initdata struct d40_reg_val dma_init_reg_v4b[] = {
332 	/* Clock every part of the DMA block from start */
333 	{ .reg = D40_DREG_GCC,    .val = D40_DREG_GCC_ENABLE_ALL},
334 
335 	/* Interrupts on all logical channels */
336 	{ .reg = D40_DREG_CLCMIS1, .val = 0xFFFFFFFF},
337 	{ .reg = D40_DREG_CLCMIS2, .val = 0xFFFFFFFF},
338 	{ .reg = D40_DREG_CLCMIS3, .val = 0xFFFFFFFF},
339 	{ .reg = D40_DREG_CLCMIS4, .val = 0xFFFFFFFF},
340 	{ .reg = D40_DREG_CLCMIS5, .val = 0xFFFFFFFF},
341 	{ .reg = D40_DREG_CLCICR1, .val = 0xFFFFFFFF},
342 	{ .reg = D40_DREG_CLCICR2, .val = 0xFFFFFFFF},
343 	{ .reg = D40_DREG_CLCICR3, .val = 0xFFFFFFFF},
344 	{ .reg = D40_DREG_CLCICR4, .val = 0xFFFFFFFF},
345 	{ .reg = D40_DREG_CLCICR5, .val = 0xFFFFFFFF},
346 	{ .reg = D40_DREG_CLCTIS1, .val = 0xFFFFFFFF},
347 	{ .reg = D40_DREG_CLCTIS2, .val = 0xFFFFFFFF},
348 	{ .reg = D40_DREG_CLCTIS3, .val = 0xFFFFFFFF},
349 	{ .reg = D40_DREG_CLCTIS4, .val = 0xFFFFFFFF},
350 	{ .reg = D40_DREG_CLCTIS5, .val = 0xFFFFFFFF}
351 };
352 
353 /**
354  * struct d40_lli_pool - Structure for keeping LLIs in memory
355  *
356  * @base: Pointer to memory area when the pre_alloc_lli's are not large
357  * enough, IE bigger than the most common case, 1 dst and 1 src. NULL if
358  * pre_alloc_lli is used.
359  * @dma_addr: DMA address, if mapped
360  * @size: The size in bytes of the memory at base or the size of pre_alloc_lli.
361  * @pre_alloc_lli: Pre allocated area for the most common case of transfers,
362  * one buffer to one buffer.
363  */
364 struct d40_lli_pool {
365 	void	*base;
366 	int	 size;
367 	dma_addr_t	dma_addr;
368 	/* Space for dst and src, plus an extra for padding */
369 	u8	 pre_alloc_lli[3 * sizeof(struct d40_phy_lli)];
370 };
371 
372 /**
373  * struct d40_desc - A descriptor is one DMA job.
374  *
375  * @lli_phy: LLI settings for physical channel. Both src and dst=
376  * points into the lli_pool, to base if lli_len > 1 or to pre_alloc_lli if
377  * lli_len equals one.
378  * @lli_log: Same as above but for logical channels.
379  * @lli_pool: The pool with two entries pre-allocated.
380  * @lli_len: Number of llis of current descriptor.
381  * @lli_current: Number of transferred llis.
382  * @lcla_alloc: Number of LCLA entries allocated.
383  * @txd: DMA engine struct. Used for among other things for communication
384  * during a transfer.
385  * @node: List entry.
386  * @is_in_client_list: true if the client owns this descriptor.
387  * @cyclic: true if this is a cyclic job
388  *
389  * This descriptor is used for both logical and physical transfers.
390  */
391 struct d40_desc {
392 	/* LLI physical */
393 	struct d40_phy_lli_bidir	 lli_phy;
394 	/* LLI logical */
395 	struct d40_log_lli_bidir	 lli_log;
396 
397 	struct d40_lli_pool		 lli_pool;
398 	int				 lli_len;
399 	int				 lli_current;
400 	int				 lcla_alloc;
401 
402 	struct dma_async_tx_descriptor	 txd;
403 	struct list_head		 node;
404 
405 	bool				 is_in_client_list;
406 	bool				 cyclic;
407 };
408 
409 /**
410  * struct d40_lcla_pool - LCLA pool settings and data.
411  *
412  * @base: The virtual address of LCLA. 18 bit aligned.
413  * @dma_addr: DMA address, if mapped
414  * @base_unaligned: The orignal kmalloc pointer, if kmalloc is used.
415  * This pointer is only there for clean-up on error.
416  * @pages: The number of pages needed for all physical channels.
417  * Only used later for clean-up on error
418  * @lock: Lock to protect the content in this struct.
419  * @alloc_map: big map over which LCLA entry is own by which job.
420  */
421 struct d40_lcla_pool {
422 	void		*base;
423 	dma_addr_t	dma_addr;
424 	void		*base_unaligned;
425 	int		 pages;
426 	spinlock_t	 lock;
427 	struct d40_desc	**alloc_map;
428 };
429 
430 /**
431  * struct d40_phy_res - struct for handling eventlines mapped to physical
432  * channels.
433  *
434  * @lock: A lock protection this entity.
435  * @reserved: True if used by secure world or otherwise.
436  * @num: The physical channel number of this entity.
437  * @allocated_src: Bit mapped to show which src event line's are mapped to
438  * this physical channel. Can also be free or physically allocated.
439  * @allocated_dst: Same as for src but is dst.
440  * allocated_dst and allocated_src uses the D40_ALLOC* defines as well as
441  * event line number.
442  * @use_soft_lli: To mark if the linked lists of channel are managed by SW.
443  */
444 struct d40_phy_res {
445 	spinlock_t lock;
446 	bool	   reserved;
447 	int	   num;
448 	u32	   allocated_src;
449 	u32	   allocated_dst;
450 	bool	   use_soft_lli;
451 };
452 
453 struct d40_base;
454 
455 /**
456  * struct d40_chan - Struct that describes a channel.
457  *
458  * @lock: A spinlock to protect this struct.
459  * @log_num: The logical number, if any of this channel.
460  * @pending_tx: The number of pending transfers. Used between interrupt handler
461  * and tasklet.
462  * @busy: Set to true when transfer is ongoing on this channel.
463  * @phy_chan: Pointer to physical channel which this instance runs on. If this
464  * point is NULL, then the channel is not allocated.
465  * @chan: DMA engine handle.
466  * @tasklet: Tasklet that gets scheduled from interrupt context to complete a
467  * transfer and call client callback.
468  * @client: Cliented owned descriptor list.
469  * @pending_queue: Submitted jobs, to be issued by issue_pending()
470  * @active: Active descriptor.
471  * @done: Completed jobs
472  * @queue: Queued jobs.
473  * @prepare_queue: Prepared jobs.
474  * @dma_cfg: The client configuration of this dma channel.
475  * @slave_config: DMA slave configuration.
476  * @configured: whether the dma_cfg configuration is valid
477  * @base: Pointer to the device instance struct.
478  * @src_def_cfg: Default cfg register setting for src.
479  * @dst_def_cfg: Default cfg register setting for dst.
480  * @log_def: Default logical channel settings.
481  * @lcpa: Pointer to dst and src lcpa settings.
482  * @runtime_addr: runtime configured address.
483  * @runtime_direction: runtime configured direction.
484  *
485  * This struct can either "be" a logical or a physical channel.
486  */
487 struct d40_chan {
488 	spinlock_t			 lock;
489 	int				 log_num;
490 	int				 pending_tx;
491 	bool				 busy;
492 	struct d40_phy_res		*phy_chan;
493 	struct dma_chan			 chan;
494 	struct tasklet_struct		 tasklet;
495 	struct list_head		 client;
496 	struct list_head		 pending_queue;
497 	struct list_head		 active;
498 	struct list_head		 done;
499 	struct list_head		 queue;
500 	struct list_head		 prepare_queue;
501 	struct stedma40_chan_cfg	 dma_cfg;
502 	struct dma_slave_config		 slave_config;
503 	bool				 configured;
504 	struct d40_base			*base;
505 	/* Default register configurations */
506 	u32				 src_def_cfg;
507 	u32				 dst_def_cfg;
508 	struct d40_def_lcsp		 log_def;
509 	struct d40_log_lli_full		*lcpa;
510 	/* Runtime reconfiguration */
511 	dma_addr_t			runtime_addr;
512 	enum dma_transfer_direction	runtime_direction;
513 };
514 
515 /**
516  * struct d40_gen_dmac - generic values to represent u8500/u8540 DMA
517  * controller
518  *
519  * @backup: the pointer to the registers address array for backup
520  * @backup_size: the size of the registers address array for backup
521  * @realtime_en: the realtime enable register
522  * @realtime_clear: the realtime clear register
523  * @high_prio_en: the high priority enable register
524  * @high_prio_clear: the high priority clear register
525  * @interrupt_en: the interrupt enable register
526  * @interrupt_clear: the interrupt clear register
527  * @il: the pointer to struct d40_interrupt_lookup
528  * @il_size: the size of d40_interrupt_lookup array
529  * @init_reg: the pointer to the struct d40_reg_val
530  * @init_reg_size: the size of d40_reg_val array
531  */
532 struct d40_gen_dmac {
533 	u32				*backup;
534 	u32				 backup_size;
535 	u32				 realtime_en;
536 	u32				 realtime_clear;
537 	u32				 high_prio_en;
538 	u32				 high_prio_clear;
539 	u32				 interrupt_en;
540 	u32				 interrupt_clear;
541 	struct d40_interrupt_lookup	*il;
542 	u32				 il_size;
543 	struct d40_reg_val		*init_reg;
544 	u32				 init_reg_size;
545 };
546 
547 /**
548  * struct d40_base - The big global struct, one for each probe'd instance.
549  *
550  * @interrupt_lock: Lock used to make sure one interrupt is handle a time.
551  * @execmd_lock: Lock for execute command usage since several channels share
552  * the same physical register.
553  * @dev: The device structure.
554  * @virtbase: The virtual base address of the DMA's register.
555  * @rev: silicon revision detected.
556  * @clk: Pointer to the DMA clock structure.
557  * @irq: The IRQ number.
558  * @num_memcpy_chans: The number of channels used for memcpy (mem-to-mem
559  * transfers).
560  * @num_phy_chans: The number of physical channels. Read from HW. This
561  * is the number of available channels for this driver, not counting "Secure
562  * mode" allocated physical channels.
563  * @num_log_chans: The number of logical channels. Calculated from
564  * num_phy_chans.
565  * @dma_both: dma_device channels that can do both memcpy and slave transfers.
566  * @dma_slave: dma_device channels that can do only do slave transfers.
567  * @dma_memcpy: dma_device channels that can do only do memcpy transfers.
568  * @phy_chans: Room for all possible physical channels in system.
569  * @log_chans: Room for all possible logical channels in system.
570  * @lookup_log_chans: Used to map interrupt number to logical channel. Points
571  * to log_chans entries.
572  * @lookup_phy_chans: Used to map interrupt number to physical channel. Points
573  * to phy_chans entries.
574  * @plat_data: Pointer to provided platform_data which is the driver
575  * configuration.
576  * @lcpa_regulator: Pointer to hold the regulator for the esram bank for lcla.
577  * @phy_res: Vector containing all physical channels.
578  * @lcla_pool: lcla pool settings and data.
579  * @lcpa_base: The virtual mapped address of LCPA.
580  * @phy_lcpa: The physical address of the LCPA.
581  * @lcpa_size: The size of the LCPA area.
582  * @desc_slab: cache for descriptors.
583  * @reg_val_backup: Here the values of some hardware registers are stored
584  * before the DMA is powered off. They are restored when the power is back on.
585  * @reg_val_backup_v4: Backup of registers that only exits on dma40 v3 and
586  * later
587  * @reg_val_backup_chan: Backup data for standard channel parameter registers.
588  * @regs_interrupt: Scratch space for registers during interrupt.
589  * @gcc_pwr_off_mask: Mask to maintain the channels that can be turned off.
590  * @gen_dmac: the struct for generic registers values to represent u8500/8540
591  * DMA controller
592  */
593 struct d40_base {
594 	spinlock_t			 interrupt_lock;
595 	spinlock_t			 execmd_lock;
596 	struct device			 *dev;
597 	void __iomem			 *virtbase;
598 	u8				  rev:4;
599 	struct clk			 *clk;
600 	int				  irq;
601 	int				  num_memcpy_chans;
602 	int				  num_phy_chans;
603 	int				  num_log_chans;
604 	struct dma_device		  dma_both;
605 	struct dma_device		  dma_slave;
606 	struct dma_device		  dma_memcpy;
607 	struct d40_chan			 *phy_chans;
608 	struct d40_chan			 *log_chans;
609 	struct d40_chan			**lookup_log_chans;
610 	struct d40_chan			**lookup_phy_chans;
611 	struct stedma40_platform_data	 *plat_data;
612 	struct regulator		 *lcpa_regulator;
613 	/* Physical half channels */
614 	struct d40_phy_res		 *phy_res;
615 	struct d40_lcla_pool		  lcla_pool;
616 	void				 *lcpa_base;
617 	dma_addr_t			  phy_lcpa;
618 	resource_size_t			  lcpa_size;
619 	struct kmem_cache		 *desc_slab;
620 	u32				  reg_val_backup[BACKUP_REGS_SZ];
621 	u32				  reg_val_backup_v4[BACKUP_REGS_SZ_MAX];
622 	u32				 *reg_val_backup_chan;
623 	u32				 *regs_interrupt;
624 	u16				  gcc_pwr_off_mask;
625 	struct d40_gen_dmac		  gen_dmac;
626 };
627 
628 static struct device *chan2dev(struct d40_chan *d40c)
629 {
630 	return &d40c->chan.dev->device;
631 }
632 
633 static bool chan_is_physical(struct d40_chan *chan)
634 {
635 	return chan->log_num == D40_PHY_CHAN;
636 }
637 
638 static bool chan_is_logical(struct d40_chan *chan)
639 {
640 	return !chan_is_physical(chan);
641 }
642 
643 static void __iomem *chan_base(struct d40_chan *chan)
644 {
645 	return chan->base->virtbase + D40_DREG_PCBASE +
646 	       chan->phy_chan->num * D40_DREG_PCDELTA;
647 }
648 
649 #define d40_err(dev, format, arg...)		\
650 	dev_err(dev, "[%s] " format, __func__, ## arg)
651 
652 #define chan_err(d40c, format, arg...)		\
653 	d40_err(chan2dev(d40c), format, ## arg)
654 
655 static int d40_set_runtime_config_write(struct dma_chan *chan,
656 				  struct dma_slave_config *config,
657 				  enum dma_transfer_direction direction);
658 
659 static int d40_pool_lli_alloc(struct d40_chan *d40c, struct d40_desc *d40d,
660 			      int lli_len)
661 {
662 	bool is_log = chan_is_logical(d40c);
663 	u32 align;
664 	void *base;
665 
666 	if (is_log)
667 		align = sizeof(struct d40_log_lli);
668 	else
669 		align = sizeof(struct d40_phy_lli);
670 
671 	if (lli_len == 1) {
672 		base = d40d->lli_pool.pre_alloc_lli;
673 		d40d->lli_pool.size = sizeof(d40d->lli_pool.pre_alloc_lli);
674 		d40d->lli_pool.base = NULL;
675 	} else {
676 		d40d->lli_pool.size = lli_len * 2 * align;
677 
678 		base = kmalloc(d40d->lli_pool.size + align, GFP_NOWAIT);
679 		d40d->lli_pool.base = base;
680 
681 		if (d40d->lli_pool.base == NULL)
682 			return -ENOMEM;
683 	}
684 
685 	if (is_log) {
686 		d40d->lli_log.src = PTR_ALIGN(base, align);
687 		d40d->lli_log.dst = d40d->lli_log.src + lli_len;
688 
689 		d40d->lli_pool.dma_addr = 0;
690 	} else {
691 		d40d->lli_phy.src = PTR_ALIGN(base, align);
692 		d40d->lli_phy.dst = d40d->lli_phy.src + lli_len;
693 
694 		d40d->lli_pool.dma_addr = dma_map_single(d40c->base->dev,
695 							 d40d->lli_phy.src,
696 							 d40d->lli_pool.size,
697 							 DMA_TO_DEVICE);
698 
699 		if (dma_mapping_error(d40c->base->dev,
700 				      d40d->lli_pool.dma_addr)) {
701 			kfree(d40d->lli_pool.base);
702 			d40d->lli_pool.base = NULL;
703 			d40d->lli_pool.dma_addr = 0;
704 			return -ENOMEM;
705 		}
706 	}
707 
708 	return 0;
709 }
710 
711 static void d40_pool_lli_free(struct d40_chan *d40c, struct d40_desc *d40d)
712 {
713 	if (d40d->lli_pool.dma_addr)
714 		dma_unmap_single(d40c->base->dev, d40d->lli_pool.dma_addr,
715 				 d40d->lli_pool.size, DMA_TO_DEVICE);
716 
717 	kfree(d40d->lli_pool.base);
718 	d40d->lli_pool.base = NULL;
719 	d40d->lli_pool.size = 0;
720 	d40d->lli_log.src = NULL;
721 	d40d->lli_log.dst = NULL;
722 	d40d->lli_phy.src = NULL;
723 	d40d->lli_phy.dst = NULL;
724 }
725 
726 static int d40_lcla_alloc_one(struct d40_chan *d40c,
727 			      struct d40_desc *d40d)
728 {
729 	unsigned long flags;
730 	int i;
731 	int ret = -EINVAL;
732 
733 	spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
734 
735 	/*
736 	 * Allocate both src and dst at the same time, therefore the half
737 	 * start on 1 since 0 can't be used since zero is used as end marker.
738 	 */
739 	for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) {
740 		int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i;
741 
742 		if (!d40c->base->lcla_pool.alloc_map[idx]) {
743 			d40c->base->lcla_pool.alloc_map[idx] = d40d;
744 			d40d->lcla_alloc++;
745 			ret = i;
746 			break;
747 		}
748 	}
749 
750 	spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
751 
752 	return ret;
753 }
754 
755 static int d40_lcla_free_all(struct d40_chan *d40c,
756 			     struct d40_desc *d40d)
757 {
758 	unsigned long flags;
759 	int i;
760 	int ret = -EINVAL;
761 
762 	if (chan_is_physical(d40c))
763 		return 0;
764 
765 	spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
766 
767 	for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) {
768 		int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i;
769 
770 		if (d40c->base->lcla_pool.alloc_map[idx] == d40d) {
771 			d40c->base->lcla_pool.alloc_map[idx] = NULL;
772 			d40d->lcla_alloc--;
773 			if (d40d->lcla_alloc == 0) {
774 				ret = 0;
775 				break;
776 			}
777 		}
778 	}
779 
780 	spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
781 
782 	return ret;
783 
784 }
785 
786 static void d40_desc_remove(struct d40_desc *d40d)
787 {
788 	list_del(&d40d->node);
789 }
790 
791 static struct d40_desc *d40_desc_get(struct d40_chan *d40c)
792 {
793 	struct d40_desc *desc = NULL;
794 
795 	if (!list_empty(&d40c->client)) {
796 		struct d40_desc *d;
797 		struct d40_desc *_d;
798 
799 		list_for_each_entry_safe(d, _d, &d40c->client, node) {
800 			if (async_tx_test_ack(&d->txd)) {
801 				d40_desc_remove(d);
802 				desc = d;
803 				memset(desc, 0, sizeof(*desc));
804 				break;
805 			}
806 		}
807 	}
808 
809 	if (!desc)
810 		desc = kmem_cache_zalloc(d40c->base->desc_slab, GFP_NOWAIT);
811 
812 	if (desc)
813 		INIT_LIST_HEAD(&desc->node);
814 
815 	return desc;
816 }
817 
818 static void d40_desc_free(struct d40_chan *d40c, struct d40_desc *d40d)
819 {
820 
821 	d40_pool_lli_free(d40c, d40d);
822 	d40_lcla_free_all(d40c, d40d);
823 	kmem_cache_free(d40c->base->desc_slab, d40d);
824 }
825 
826 static void d40_desc_submit(struct d40_chan *d40c, struct d40_desc *desc)
827 {
828 	list_add_tail(&desc->node, &d40c->active);
829 }
830 
831 static void d40_phy_lli_load(struct d40_chan *chan, struct d40_desc *desc)
832 {
833 	struct d40_phy_lli *lli_dst = desc->lli_phy.dst;
834 	struct d40_phy_lli *lli_src = desc->lli_phy.src;
835 	void __iomem *base = chan_base(chan);
836 
837 	writel(lli_src->reg_cfg, base + D40_CHAN_REG_SSCFG);
838 	writel(lli_src->reg_elt, base + D40_CHAN_REG_SSELT);
839 	writel(lli_src->reg_ptr, base + D40_CHAN_REG_SSPTR);
840 	writel(lli_src->reg_lnk, base + D40_CHAN_REG_SSLNK);
841 
842 	writel(lli_dst->reg_cfg, base + D40_CHAN_REG_SDCFG);
843 	writel(lli_dst->reg_elt, base + D40_CHAN_REG_SDELT);
844 	writel(lli_dst->reg_ptr, base + D40_CHAN_REG_SDPTR);
845 	writel(lli_dst->reg_lnk, base + D40_CHAN_REG_SDLNK);
846 }
847 
848 static void d40_desc_done(struct d40_chan *d40c, struct d40_desc *desc)
849 {
850 	list_add_tail(&desc->node, &d40c->done);
851 }
852 
853 static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc)
854 {
855 	struct d40_lcla_pool *pool = &chan->base->lcla_pool;
856 	struct d40_log_lli_bidir *lli = &desc->lli_log;
857 	int lli_current = desc->lli_current;
858 	int lli_len = desc->lli_len;
859 	bool cyclic = desc->cyclic;
860 	int curr_lcla = -EINVAL;
861 	int first_lcla = 0;
862 	bool use_esram_lcla = chan->base->plat_data->use_esram_lcla;
863 	bool linkback;
864 
865 	/*
866 	 * We may have partially running cyclic transfers, in case we did't get
867 	 * enough LCLA entries.
868 	 */
869 	linkback = cyclic && lli_current == 0;
870 
871 	/*
872 	 * For linkback, we need one LCLA even with only one link, because we
873 	 * can't link back to the one in LCPA space
874 	 */
875 	if (linkback || (lli_len - lli_current > 1)) {
876 		/*
877 		 * If the channel is expected to use only soft_lli don't
878 		 * allocate a lcla. This is to avoid a HW issue that exists
879 		 * in some controller during a peripheral to memory transfer
880 		 * that uses linked lists.
881 		 */
882 		if (!(chan->phy_chan->use_soft_lli &&
883 			chan->dma_cfg.dir == DMA_DEV_TO_MEM))
884 			curr_lcla = d40_lcla_alloc_one(chan, desc);
885 
886 		first_lcla = curr_lcla;
887 	}
888 
889 	/*
890 	 * For linkback, we normally load the LCPA in the loop since we need to
891 	 * link it to the second LCLA and not the first.  However, if we
892 	 * couldn't even get a first LCLA, then we have to run in LCPA and
893 	 * reload manually.
894 	 */
895 	if (!linkback || curr_lcla == -EINVAL) {
896 		unsigned int flags = 0;
897 
898 		if (curr_lcla == -EINVAL)
899 			flags |= LLI_TERM_INT;
900 
901 		d40_log_lli_lcpa_write(chan->lcpa,
902 				       &lli->dst[lli_current],
903 				       &lli->src[lli_current],
904 				       curr_lcla,
905 				       flags);
906 		lli_current++;
907 	}
908 
909 	if (curr_lcla < 0)
910 		goto set_current;
911 
912 	for (; lli_current < lli_len; lli_current++) {
913 		unsigned int lcla_offset = chan->phy_chan->num * 1024 +
914 					   8 * curr_lcla * 2;
915 		struct d40_log_lli *lcla = pool->base + lcla_offset;
916 		unsigned int flags = 0;
917 		int next_lcla;
918 
919 		if (lli_current + 1 < lli_len)
920 			next_lcla = d40_lcla_alloc_one(chan, desc);
921 		else
922 			next_lcla = linkback ? first_lcla : -EINVAL;
923 
924 		if (cyclic || next_lcla == -EINVAL)
925 			flags |= LLI_TERM_INT;
926 
927 		if (linkback && curr_lcla == first_lcla) {
928 			/* First link goes in both LCPA and LCLA */
929 			d40_log_lli_lcpa_write(chan->lcpa,
930 					       &lli->dst[lli_current],
931 					       &lli->src[lli_current],
932 					       next_lcla, flags);
933 		}
934 
935 		/*
936 		 * One unused LCLA in the cyclic case if the very first
937 		 * next_lcla fails...
938 		 */
939 		d40_log_lli_lcla_write(lcla,
940 				       &lli->dst[lli_current],
941 				       &lli->src[lli_current],
942 				       next_lcla, flags);
943 
944 		/*
945 		 * Cache maintenance is not needed if lcla is
946 		 * mapped in esram
947 		 */
948 		if (!use_esram_lcla) {
949 			dma_sync_single_range_for_device(chan->base->dev,
950 						pool->dma_addr, lcla_offset,
951 						2 * sizeof(struct d40_log_lli),
952 						DMA_TO_DEVICE);
953 		}
954 		curr_lcla = next_lcla;
955 
956 		if (curr_lcla == -EINVAL || curr_lcla == first_lcla) {
957 			lli_current++;
958 			break;
959 		}
960 	}
961  set_current:
962 	desc->lli_current = lli_current;
963 }
964 
965 static void d40_desc_load(struct d40_chan *d40c, struct d40_desc *d40d)
966 {
967 	if (chan_is_physical(d40c)) {
968 		d40_phy_lli_load(d40c, d40d);
969 		d40d->lli_current = d40d->lli_len;
970 	} else
971 		d40_log_lli_to_lcxa(d40c, d40d);
972 }
973 
974 static struct d40_desc *d40_first_active_get(struct d40_chan *d40c)
975 {
976 	return list_first_entry_or_null(&d40c->active, struct d40_desc, node);
977 }
978 
979 /* remove desc from current queue and add it to the pending_queue */
980 static void d40_desc_queue(struct d40_chan *d40c, struct d40_desc *desc)
981 {
982 	d40_desc_remove(desc);
983 	desc->is_in_client_list = false;
984 	list_add_tail(&desc->node, &d40c->pending_queue);
985 }
986 
987 static struct d40_desc *d40_first_pending(struct d40_chan *d40c)
988 {
989 	return list_first_entry_or_null(&d40c->pending_queue, struct d40_desc,
990 					node);
991 }
992 
993 static struct d40_desc *d40_first_queued(struct d40_chan *d40c)
994 {
995 	return list_first_entry_or_null(&d40c->queue, struct d40_desc, node);
996 }
997 
998 static struct d40_desc *d40_first_done(struct d40_chan *d40c)
999 {
1000 	return list_first_entry_or_null(&d40c->done, struct d40_desc, node);
1001 }
1002 
1003 static int d40_psize_2_burst_size(bool is_log, int psize)
1004 {
1005 	if (is_log) {
1006 		if (psize == STEDMA40_PSIZE_LOG_1)
1007 			return 1;
1008 	} else {
1009 		if (psize == STEDMA40_PSIZE_PHY_1)
1010 			return 1;
1011 	}
1012 
1013 	return 2 << psize;
1014 }
1015 
1016 /*
1017  * The dma only supports transmitting packages up to
1018  * STEDMA40_MAX_SEG_SIZE * data_width, where data_width is stored in Bytes.
1019  *
1020  * Calculate the total number of dma elements required to send the entire sg list.
1021  */
1022 static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2)
1023 {
1024 	int dmalen;
1025 	u32 max_w = max(data_width1, data_width2);
1026 	u32 min_w = min(data_width1, data_width2);
1027 	u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w);
1028 
1029 	if (seg_max > STEDMA40_MAX_SEG_SIZE)
1030 		seg_max -= max_w;
1031 
1032 	if (!IS_ALIGNED(size, max_w))
1033 		return -EINVAL;
1034 
1035 	if (size <= seg_max)
1036 		dmalen = 1;
1037 	else {
1038 		dmalen = size / seg_max;
1039 		if (dmalen * seg_max < size)
1040 			dmalen++;
1041 	}
1042 	return dmalen;
1043 }
1044 
1045 static int d40_sg_2_dmalen(struct scatterlist *sgl, int sg_len,
1046 			   u32 data_width1, u32 data_width2)
1047 {
1048 	struct scatterlist *sg;
1049 	int i;
1050 	int len = 0;
1051 	int ret;
1052 
1053 	for_each_sg(sgl, sg, sg_len, i) {
1054 		ret = d40_size_2_dmalen(sg_dma_len(sg),
1055 					data_width1, data_width2);
1056 		if (ret < 0)
1057 			return ret;
1058 		len += ret;
1059 	}
1060 	return len;
1061 }
1062 
1063 static int __d40_execute_command_phy(struct d40_chan *d40c,
1064 				     enum d40_command command)
1065 {
1066 	u32 status;
1067 	int i;
1068 	void __iomem *active_reg;
1069 	int ret = 0;
1070 	unsigned long flags;
1071 	u32 wmask;
1072 
1073 	if (command == D40_DMA_STOP) {
1074 		ret = __d40_execute_command_phy(d40c, D40_DMA_SUSPEND_REQ);
1075 		if (ret)
1076 			return ret;
1077 	}
1078 
1079 	spin_lock_irqsave(&d40c->base->execmd_lock, flags);
1080 
1081 	if (d40c->phy_chan->num % 2 == 0)
1082 		active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
1083 	else
1084 		active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
1085 
1086 	if (command == D40_DMA_SUSPEND_REQ) {
1087 		status = (readl(active_reg) &
1088 			  D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1089 			D40_CHAN_POS(d40c->phy_chan->num);
1090 
1091 		if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP)
1092 			goto unlock;
1093 	}
1094 
1095 	wmask = 0xffffffff & ~(D40_CHAN_POS_MASK(d40c->phy_chan->num));
1096 	writel(wmask | (command << D40_CHAN_POS(d40c->phy_chan->num)),
1097 	       active_reg);
1098 
1099 	if (command == D40_DMA_SUSPEND_REQ) {
1100 
1101 		for (i = 0 ; i < D40_SUSPEND_MAX_IT; i++) {
1102 			status = (readl(active_reg) &
1103 				  D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1104 				D40_CHAN_POS(d40c->phy_chan->num);
1105 
1106 			cpu_relax();
1107 			/*
1108 			 * Reduce the number of bus accesses while
1109 			 * waiting for the DMA to suspend.
1110 			 */
1111 			udelay(3);
1112 
1113 			if (status == D40_DMA_STOP ||
1114 			    status == D40_DMA_SUSPENDED)
1115 				break;
1116 		}
1117 
1118 		if (i == D40_SUSPEND_MAX_IT) {
1119 			chan_err(d40c,
1120 				"unable to suspend the chl %d (log: %d) status %x\n",
1121 				d40c->phy_chan->num, d40c->log_num,
1122 				status);
1123 			dump_stack();
1124 			ret = -EBUSY;
1125 		}
1126 
1127 	}
1128  unlock:
1129 	spin_unlock_irqrestore(&d40c->base->execmd_lock, flags);
1130 	return ret;
1131 }
1132 
1133 static void d40_term_all(struct d40_chan *d40c)
1134 {
1135 	struct d40_desc *d40d;
1136 	struct d40_desc *_d;
1137 
1138 	/* Release completed descriptors */
1139 	while ((d40d = d40_first_done(d40c))) {
1140 		d40_desc_remove(d40d);
1141 		d40_desc_free(d40c, d40d);
1142 	}
1143 
1144 	/* Release active descriptors */
1145 	while ((d40d = d40_first_active_get(d40c))) {
1146 		d40_desc_remove(d40d);
1147 		d40_desc_free(d40c, d40d);
1148 	}
1149 
1150 	/* Release queued descriptors waiting for transfer */
1151 	while ((d40d = d40_first_queued(d40c))) {
1152 		d40_desc_remove(d40d);
1153 		d40_desc_free(d40c, d40d);
1154 	}
1155 
1156 	/* Release pending descriptors */
1157 	while ((d40d = d40_first_pending(d40c))) {
1158 		d40_desc_remove(d40d);
1159 		d40_desc_free(d40c, d40d);
1160 	}
1161 
1162 	/* Release client owned descriptors */
1163 	if (!list_empty(&d40c->client))
1164 		list_for_each_entry_safe(d40d, _d, &d40c->client, node) {
1165 			d40_desc_remove(d40d);
1166 			d40_desc_free(d40c, d40d);
1167 		}
1168 
1169 	/* Release descriptors in prepare queue */
1170 	if (!list_empty(&d40c->prepare_queue))
1171 		list_for_each_entry_safe(d40d, _d,
1172 					 &d40c->prepare_queue, node) {
1173 			d40_desc_remove(d40d);
1174 			d40_desc_free(d40c, d40d);
1175 		}
1176 
1177 	d40c->pending_tx = 0;
1178 }
1179 
1180 static void __d40_config_set_event(struct d40_chan *d40c,
1181 				   enum d40_events event_type, u32 event,
1182 				   int reg)
1183 {
1184 	void __iomem *addr = chan_base(d40c) + reg;
1185 	int tries;
1186 	u32 status;
1187 
1188 	switch (event_type) {
1189 
1190 	case D40_DEACTIVATE_EVENTLINE:
1191 
1192 		writel((D40_DEACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event))
1193 		       | ~D40_EVENTLINE_MASK(event), addr);
1194 		break;
1195 
1196 	case D40_SUSPEND_REQ_EVENTLINE:
1197 		status = (readl(addr) & D40_EVENTLINE_MASK(event)) >>
1198 			  D40_EVENTLINE_POS(event);
1199 
1200 		if (status == D40_DEACTIVATE_EVENTLINE ||
1201 		    status == D40_SUSPEND_REQ_EVENTLINE)
1202 			break;
1203 
1204 		writel((D40_SUSPEND_REQ_EVENTLINE << D40_EVENTLINE_POS(event))
1205 		       | ~D40_EVENTLINE_MASK(event), addr);
1206 
1207 		for (tries = 0 ; tries < D40_SUSPEND_MAX_IT; tries++) {
1208 
1209 			status = (readl(addr) & D40_EVENTLINE_MASK(event)) >>
1210 				  D40_EVENTLINE_POS(event);
1211 
1212 			cpu_relax();
1213 			/*
1214 			 * Reduce the number of bus accesses while
1215 			 * waiting for the DMA to suspend.
1216 			 */
1217 			udelay(3);
1218 
1219 			if (status == D40_DEACTIVATE_EVENTLINE)
1220 				break;
1221 		}
1222 
1223 		if (tries == D40_SUSPEND_MAX_IT) {
1224 			chan_err(d40c,
1225 				"unable to stop the event_line chl %d (log: %d)"
1226 				"status %x\n", d40c->phy_chan->num,
1227 				 d40c->log_num, status);
1228 		}
1229 		break;
1230 
1231 	case D40_ACTIVATE_EVENTLINE:
1232 	/*
1233 	 * The hardware sometimes doesn't register the enable when src and dst
1234 	 * event lines are active on the same logical channel.  Retry to ensure
1235 	 * it does.  Usually only one retry is sufficient.
1236 	 */
1237 		tries = 100;
1238 		while (--tries) {
1239 			writel((D40_ACTIVATE_EVENTLINE <<
1240 				D40_EVENTLINE_POS(event)) |
1241 				~D40_EVENTLINE_MASK(event), addr);
1242 
1243 			if (readl(addr) & D40_EVENTLINE_MASK(event))
1244 				break;
1245 		}
1246 
1247 		if (tries != 99)
1248 			dev_dbg(chan2dev(d40c),
1249 				"[%s] workaround enable S%cLNK (%d tries)\n",
1250 				__func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D',
1251 				100 - tries);
1252 
1253 		WARN_ON(!tries);
1254 		break;
1255 
1256 	case D40_ROUND_EVENTLINE:
1257 		BUG();
1258 		break;
1259 
1260 	}
1261 }
1262 
1263 static void d40_config_set_event(struct d40_chan *d40c,
1264 				 enum d40_events event_type)
1265 {
1266 	u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
1267 
1268 	/* Enable event line connected to device (or memcpy) */
1269 	if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
1270 	    (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
1271 		__d40_config_set_event(d40c, event_type, event,
1272 				       D40_CHAN_REG_SSLNK);
1273 
1274 	if (d40c->dma_cfg.dir !=  DMA_DEV_TO_MEM)
1275 		__d40_config_set_event(d40c, event_type, event,
1276 				       D40_CHAN_REG_SDLNK);
1277 }
1278 
1279 static u32 d40_chan_has_events(struct d40_chan *d40c)
1280 {
1281 	void __iomem *chanbase = chan_base(d40c);
1282 	u32 val;
1283 
1284 	val = readl(chanbase + D40_CHAN_REG_SSLNK);
1285 	val |= readl(chanbase + D40_CHAN_REG_SDLNK);
1286 
1287 	return val;
1288 }
1289 
1290 static int
1291 __d40_execute_command_log(struct d40_chan *d40c, enum d40_command command)
1292 {
1293 	unsigned long flags;
1294 	int ret = 0;
1295 	u32 active_status;
1296 	void __iomem *active_reg;
1297 
1298 	if (d40c->phy_chan->num % 2 == 0)
1299 		active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
1300 	else
1301 		active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
1302 
1303 
1304 	spin_lock_irqsave(&d40c->phy_chan->lock, flags);
1305 
1306 	switch (command) {
1307 	case D40_DMA_STOP:
1308 	case D40_DMA_SUSPEND_REQ:
1309 
1310 		active_status = (readl(active_reg) &
1311 				 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1312 				 D40_CHAN_POS(d40c->phy_chan->num);
1313 
1314 		if (active_status == D40_DMA_RUN)
1315 			d40_config_set_event(d40c, D40_SUSPEND_REQ_EVENTLINE);
1316 		else
1317 			d40_config_set_event(d40c, D40_DEACTIVATE_EVENTLINE);
1318 
1319 		if (!d40_chan_has_events(d40c) && (command == D40_DMA_STOP))
1320 			ret = __d40_execute_command_phy(d40c, command);
1321 
1322 		break;
1323 
1324 	case D40_DMA_RUN:
1325 
1326 		d40_config_set_event(d40c, D40_ACTIVATE_EVENTLINE);
1327 		ret = __d40_execute_command_phy(d40c, command);
1328 		break;
1329 
1330 	case D40_DMA_SUSPENDED:
1331 		BUG();
1332 		break;
1333 	}
1334 
1335 	spin_unlock_irqrestore(&d40c->phy_chan->lock, flags);
1336 	return ret;
1337 }
1338 
1339 static int d40_channel_execute_command(struct d40_chan *d40c,
1340 				       enum d40_command command)
1341 {
1342 	if (chan_is_logical(d40c))
1343 		return __d40_execute_command_log(d40c, command);
1344 	else
1345 		return __d40_execute_command_phy(d40c, command);
1346 }
1347 
1348 static u32 d40_get_prmo(struct d40_chan *d40c)
1349 {
1350 	static const unsigned int phy_map[] = {
1351 		[STEDMA40_PCHAN_BASIC_MODE]
1352 			= D40_DREG_PRMO_PCHAN_BASIC,
1353 		[STEDMA40_PCHAN_MODULO_MODE]
1354 			= D40_DREG_PRMO_PCHAN_MODULO,
1355 		[STEDMA40_PCHAN_DOUBLE_DST_MODE]
1356 			= D40_DREG_PRMO_PCHAN_DOUBLE_DST,
1357 	};
1358 	static const unsigned int log_map[] = {
1359 		[STEDMA40_LCHAN_SRC_PHY_DST_LOG]
1360 			= D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG,
1361 		[STEDMA40_LCHAN_SRC_LOG_DST_PHY]
1362 			= D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY,
1363 		[STEDMA40_LCHAN_SRC_LOG_DST_LOG]
1364 			= D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG,
1365 	};
1366 
1367 	if (chan_is_physical(d40c))
1368 		return phy_map[d40c->dma_cfg.mode_opt];
1369 	else
1370 		return log_map[d40c->dma_cfg.mode_opt];
1371 }
1372 
1373 static void d40_config_write(struct d40_chan *d40c)
1374 {
1375 	u32 addr_base;
1376 	u32 var;
1377 
1378 	/* Odd addresses are even addresses + 4 */
1379 	addr_base = (d40c->phy_chan->num % 2) * 4;
1380 	/* Setup channel mode to logical or physical */
1381 	var = ((u32)(chan_is_logical(d40c)) + 1) <<
1382 		D40_CHAN_POS(d40c->phy_chan->num);
1383 	writel(var, d40c->base->virtbase + D40_DREG_PRMSE + addr_base);
1384 
1385 	/* Setup operational mode option register */
1386 	var = d40_get_prmo(d40c) << D40_CHAN_POS(d40c->phy_chan->num);
1387 
1388 	writel(var, d40c->base->virtbase + D40_DREG_PRMOE + addr_base);
1389 
1390 	if (chan_is_logical(d40c)) {
1391 		int lidx = (d40c->phy_chan->num << D40_SREG_ELEM_LOG_LIDX_POS)
1392 			   & D40_SREG_ELEM_LOG_LIDX_MASK;
1393 		void __iomem *chanbase = chan_base(d40c);
1394 
1395 		/* Set default config for CFG reg */
1396 		writel(d40c->src_def_cfg, chanbase + D40_CHAN_REG_SSCFG);
1397 		writel(d40c->dst_def_cfg, chanbase + D40_CHAN_REG_SDCFG);
1398 
1399 		/* Set LIDX for lcla */
1400 		writel(lidx, chanbase + D40_CHAN_REG_SSELT);
1401 		writel(lidx, chanbase + D40_CHAN_REG_SDELT);
1402 
1403 		/* Clear LNK which will be used by d40_chan_has_events() */
1404 		writel(0, chanbase + D40_CHAN_REG_SSLNK);
1405 		writel(0, chanbase + D40_CHAN_REG_SDLNK);
1406 	}
1407 }
1408 
1409 static u32 d40_residue(struct d40_chan *d40c)
1410 {
1411 	u32 num_elt;
1412 
1413 	if (chan_is_logical(d40c))
1414 		num_elt = (readl(&d40c->lcpa->lcsp2) & D40_MEM_LCSP2_ECNT_MASK)
1415 			>> D40_MEM_LCSP2_ECNT_POS;
1416 	else {
1417 		u32 val = readl(chan_base(d40c) + D40_CHAN_REG_SDELT);
1418 		num_elt = (val & D40_SREG_ELEM_PHY_ECNT_MASK)
1419 			  >> D40_SREG_ELEM_PHY_ECNT_POS;
1420 	}
1421 
1422 	return num_elt * d40c->dma_cfg.dst_info.data_width;
1423 }
1424 
1425 static bool d40_tx_is_linked(struct d40_chan *d40c)
1426 {
1427 	bool is_link;
1428 
1429 	if (chan_is_logical(d40c))
1430 		is_link = readl(&d40c->lcpa->lcsp3) &  D40_MEM_LCSP3_DLOS_MASK;
1431 	else
1432 		is_link = readl(chan_base(d40c) + D40_CHAN_REG_SDLNK)
1433 			  & D40_SREG_LNK_PHYS_LNK_MASK;
1434 
1435 	return is_link;
1436 }
1437 
1438 static int d40_pause(struct dma_chan *chan)
1439 {
1440 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
1441 	int res = 0;
1442 	unsigned long flags;
1443 
1444 	if (d40c->phy_chan == NULL) {
1445 		chan_err(d40c, "Channel is not allocated!\n");
1446 		return -EINVAL;
1447 	}
1448 
1449 	if (!d40c->busy)
1450 		return 0;
1451 
1452 	spin_lock_irqsave(&d40c->lock, flags);
1453 	pm_runtime_get_sync(d40c->base->dev);
1454 
1455 	res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
1456 
1457 	pm_runtime_mark_last_busy(d40c->base->dev);
1458 	pm_runtime_put_autosuspend(d40c->base->dev);
1459 	spin_unlock_irqrestore(&d40c->lock, flags);
1460 	return res;
1461 }
1462 
1463 static int d40_resume(struct dma_chan *chan)
1464 {
1465 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
1466 	int res = 0;
1467 	unsigned long flags;
1468 
1469 	if (d40c->phy_chan == NULL) {
1470 		chan_err(d40c, "Channel is not allocated!\n");
1471 		return -EINVAL;
1472 	}
1473 
1474 	if (!d40c->busy)
1475 		return 0;
1476 
1477 	spin_lock_irqsave(&d40c->lock, flags);
1478 	pm_runtime_get_sync(d40c->base->dev);
1479 
1480 	/* If bytes left to transfer or linked tx resume job */
1481 	if (d40_residue(d40c) || d40_tx_is_linked(d40c))
1482 		res = d40_channel_execute_command(d40c, D40_DMA_RUN);
1483 
1484 	pm_runtime_mark_last_busy(d40c->base->dev);
1485 	pm_runtime_put_autosuspend(d40c->base->dev);
1486 	spin_unlock_irqrestore(&d40c->lock, flags);
1487 	return res;
1488 }
1489 
1490 static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx)
1491 {
1492 	struct d40_chan *d40c = container_of(tx->chan,
1493 					     struct d40_chan,
1494 					     chan);
1495 	struct d40_desc *d40d = container_of(tx, struct d40_desc, txd);
1496 	unsigned long flags;
1497 	dma_cookie_t cookie;
1498 
1499 	spin_lock_irqsave(&d40c->lock, flags);
1500 	cookie = dma_cookie_assign(tx);
1501 	d40_desc_queue(d40c, d40d);
1502 	spin_unlock_irqrestore(&d40c->lock, flags);
1503 
1504 	return cookie;
1505 }
1506 
1507 static int d40_start(struct d40_chan *d40c)
1508 {
1509 	return d40_channel_execute_command(d40c, D40_DMA_RUN);
1510 }
1511 
1512 static struct d40_desc *d40_queue_start(struct d40_chan *d40c)
1513 {
1514 	struct d40_desc *d40d;
1515 	int err;
1516 
1517 	/* Start queued jobs, if any */
1518 	d40d = d40_first_queued(d40c);
1519 
1520 	if (d40d != NULL) {
1521 		if (!d40c->busy) {
1522 			d40c->busy = true;
1523 			pm_runtime_get_sync(d40c->base->dev);
1524 		}
1525 
1526 		/* Remove from queue */
1527 		d40_desc_remove(d40d);
1528 
1529 		/* Add to active queue */
1530 		d40_desc_submit(d40c, d40d);
1531 
1532 		/* Initiate DMA job */
1533 		d40_desc_load(d40c, d40d);
1534 
1535 		/* Start dma job */
1536 		err = d40_start(d40c);
1537 
1538 		if (err)
1539 			return NULL;
1540 	}
1541 
1542 	return d40d;
1543 }
1544 
1545 /* called from interrupt context */
1546 static void dma_tc_handle(struct d40_chan *d40c)
1547 {
1548 	struct d40_desc *d40d;
1549 
1550 	/* Get first active entry from list */
1551 	d40d = d40_first_active_get(d40c);
1552 
1553 	if (d40d == NULL)
1554 		return;
1555 
1556 	if (d40d->cyclic) {
1557 		/*
1558 		 * If this was a paritially loaded list, we need to reloaded
1559 		 * it, and only when the list is completed.  We need to check
1560 		 * for done because the interrupt will hit for every link, and
1561 		 * not just the last one.
1562 		 */
1563 		if (d40d->lli_current < d40d->lli_len
1564 		    && !d40_tx_is_linked(d40c)
1565 		    && !d40_residue(d40c)) {
1566 			d40_lcla_free_all(d40c, d40d);
1567 			d40_desc_load(d40c, d40d);
1568 			(void) d40_start(d40c);
1569 
1570 			if (d40d->lli_current == d40d->lli_len)
1571 				d40d->lli_current = 0;
1572 		}
1573 	} else {
1574 		d40_lcla_free_all(d40c, d40d);
1575 
1576 		if (d40d->lli_current < d40d->lli_len) {
1577 			d40_desc_load(d40c, d40d);
1578 			/* Start dma job */
1579 			(void) d40_start(d40c);
1580 			return;
1581 		}
1582 
1583 		if (d40_queue_start(d40c) == NULL) {
1584 			d40c->busy = false;
1585 
1586 			pm_runtime_mark_last_busy(d40c->base->dev);
1587 			pm_runtime_put_autosuspend(d40c->base->dev);
1588 		}
1589 
1590 		d40_desc_remove(d40d);
1591 		d40_desc_done(d40c, d40d);
1592 	}
1593 
1594 	d40c->pending_tx++;
1595 	tasklet_schedule(&d40c->tasklet);
1596 
1597 }
1598 
1599 static void dma_tasklet(struct tasklet_struct *t)
1600 {
1601 	struct d40_chan *d40c = from_tasklet(d40c, t, tasklet);
1602 	struct d40_desc *d40d;
1603 	unsigned long flags;
1604 	bool callback_active;
1605 	struct dmaengine_desc_callback cb;
1606 
1607 	spin_lock_irqsave(&d40c->lock, flags);
1608 
1609 	/* Get first entry from the done list */
1610 	d40d = d40_first_done(d40c);
1611 	if (d40d == NULL) {
1612 		/* Check if we have reached here for cyclic job */
1613 		d40d = d40_first_active_get(d40c);
1614 		if (d40d == NULL || !d40d->cyclic)
1615 			goto check_pending_tx;
1616 	}
1617 
1618 	if (!d40d->cyclic)
1619 		dma_cookie_complete(&d40d->txd);
1620 
1621 	/*
1622 	 * If terminating a channel pending_tx is set to zero.
1623 	 * This prevents any finished active jobs to return to the client.
1624 	 */
1625 	if (d40c->pending_tx == 0) {
1626 		spin_unlock_irqrestore(&d40c->lock, flags);
1627 		return;
1628 	}
1629 
1630 	/* Callback to client */
1631 	callback_active = !!(d40d->txd.flags & DMA_PREP_INTERRUPT);
1632 	dmaengine_desc_get_callback(&d40d->txd, &cb);
1633 
1634 	if (!d40d->cyclic) {
1635 		if (async_tx_test_ack(&d40d->txd)) {
1636 			d40_desc_remove(d40d);
1637 			d40_desc_free(d40c, d40d);
1638 		} else if (!d40d->is_in_client_list) {
1639 			d40_desc_remove(d40d);
1640 			d40_lcla_free_all(d40c, d40d);
1641 			list_add_tail(&d40d->node, &d40c->client);
1642 			d40d->is_in_client_list = true;
1643 		}
1644 	}
1645 
1646 	d40c->pending_tx--;
1647 
1648 	if (d40c->pending_tx)
1649 		tasklet_schedule(&d40c->tasklet);
1650 
1651 	spin_unlock_irqrestore(&d40c->lock, flags);
1652 
1653 	if (callback_active)
1654 		dmaengine_desc_callback_invoke(&cb, NULL);
1655 
1656 	return;
1657  check_pending_tx:
1658 	/* Rescue manouver if receiving double interrupts */
1659 	if (d40c->pending_tx > 0)
1660 		d40c->pending_tx--;
1661 	spin_unlock_irqrestore(&d40c->lock, flags);
1662 }
1663 
1664 static irqreturn_t d40_handle_interrupt(int irq, void *data)
1665 {
1666 	int i;
1667 	u32 idx;
1668 	u32 row;
1669 	long chan = -1;
1670 	struct d40_chan *d40c;
1671 	struct d40_base *base = data;
1672 	u32 *regs = base->regs_interrupt;
1673 	struct d40_interrupt_lookup *il = base->gen_dmac.il;
1674 	u32 il_size = base->gen_dmac.il_size;
1675 
1676 	spin_lock(&base->interrupt_lock);
1677 
1678 	/* Read interrupt status of both logical and physical channels */
1679 	for (i = 0; i < il_size; i++)
1680 		regs[i] = readl(base->virtbase + il[i].src);
1681 
1682 	for (;;) {
1683 
1684 		chan = find_next_bit((unsigned long *)regs,
1685 				     BITS_PER_LONG * il_size, chan + 1);
1686 
1687 		/* No more set bits found? */
1688 		if (chan == BITS_PER_LONG * il_size)
1689 			break;
1690 
1691 		row = chan / BITS_PER_LONG;
1692 		idx = chan & (BITS_PER_LONG - 1);
1693 
1694 		if (il[row].offset == D40_PHY_CHAN)
1695 			d40c = base->lookup_phy_chans[idx];
1696 		else
1697 			d40c = base->lookup_log_chans[il[row].offset + idx];
1698 
1699 		if (!d40c) {
1700 			/*
1701 			 * No error because this can happen if something else
1702 			 * in the system is using the channel.
1703 			 */
1704 			continue;
1705 		}
1706 
1707 		/* ACK interrupt */
1708 		writel(BIT(idx), base->virtbase + il[row].clr);
1709 
1710 		spin_lock(&d40c->lock);
1711 
1712 		if (!il[row].is_error)
1713 			dma_tc_handle(d40c);
1714 		else
1715 			d40_err(base->dev, "IRQ chan: %ld offset %d idx %d\n",
1716 				chan, il[row].offset, idx);
1717 
1718 		spin_unlock(&d40c->lock);
1719 	}
1720 
1721 	spin_unlock(&base->interrupt_lock);
1722 
1723 	return IRQ_HANDLED;
1724 }
1725 
1726 static int d40_validate_conf(struct d40_chan *d40c,
1727 			     struct stedma40_chan_cfg *conf)
1728 {
1729 	int res = 0;
1730 	bool is_log = conf->mode == STEDMA40_MODE_LOGICAL;
1731 
1732 	if (!conf->dir) {
1733 		chan_err(d40c, "Invalid direction.\n");
1734 		res = -EINVAL;
1735 	}
1736 
1737 	if ((is_log && conf->dev_type > d40c->base->num_log_chans)  ||
1738 	    (!is_log && conf->dev_type > d40c->base->num_phy_chans) ||
1739 	    (conf->dev_type < 0)) {
1740 		chan_err(d40c, "Invalid device type (%d)\n", conf->dev_type);
1741 		res = -EINVAL;
1742 	}
1743 
1744 	if (conf->dir == DMA_DEV_TO_DEV) {
1745 		/*
1746 		 * DMAC HW supports it. Will be added to this driver,
1747 		 * in case any dma client requires it.
1748 		 */
1749 		chan_err(d40c, "periph to periph not supported\n");
1750 		res = -EINVAL;
1751 	}
1752 
1753 	if (d40_psize_2_burst_size(is_log, conf->src_info.psize) *
1754 	    conf->src_info.data_width !=
1755 	    d40_psize_2_burst_size(is_log, conf->dst_info.psize) *
1756 	    conf->dst_info.data_width) {
1757 		/*
1758 		 * The DMAC hardware only supports
1759 		 * src (burst x width) == dst (burst x width)
1760 		 */
1761 
1762 		chan_err(d40c, "src (burst x width) != dst (burst x width)\n");
1763 		res = -EINVAL;
1764 	}
1765 
1766 	return res;
1767 }
1768 
1769 static bool d40_alloc_mask_set(struct d40_phy_res *phy,
1770 			       bool is_src, int log_event_line, bool is_log,
1771 			       bool *first_user)
1772 {
1773 	unsigned long flags;
1774 	spin_lock_irqsave(&phy->lock, flags);
1775 
1776 	*first_user = ((phy->allocated_src | phy->allocated_dst)
1777 			== D40_ALLOC_FREE);
1778 
1779 	if (!is_log) {
1780 		/* Physical interrupts are masked per physical full channel */
1781 		if (phy->allocated_src == D40_ALLOC_FREE &&
1782 		    phy->allocated_dst == D40_ALLOC_FREE) {
1783 			phy->allocated_dst = D40_ALLOC_PHY;
1784 			phy->allocated_src = D40_ALLOC_PHY;
1785 			goto found_unlock;
1786 		} else
1787 			goto not_found_unlock;
1788 	}
1789 
1790 	/* Logical channel */
1791 	if (is_src) {
1792 		if (phy->allocated_src == D40_ALLOC_PHY)
1793 			goto not_found_unlock;
1794 
1795 		if (phy->allocated_src == D40_ALLOC_FREE)
1796 			phy->allocated_src = D40_ALLOC_LOG_FREE;
1797 
1798 		if (!(phy->allocated_src & BIT(log_event_line))) {
1799 			phy->allocated_src |= BIT(log_event_line);
1800 			goto found_unlock;
1801 		} else
1802 			goto not_found_unlock;
1803 	} else {
1804 		if (phy->allocated_dst == D40_ALLOC_PHY)
1805 			goto not_found_unlock;
1806 
1807 		if (phy->allocated_dst == D40_ALLOC_FREE)
1808 			phy->allocated_dst = D40_ALLOC_LOG_FREE;
1809 
1810 		if (!(phy->allocated_dst & BIT(log_event_line))) {
1811 			phy->allocated_dst |= BIT(log_event_line);
1812 			goto found_unlock;
1813 		}
1814 	}
1815  not_found_unlock:
1816 	spin_unlock_irqrestore(&phy->lock, flags);
1817 	return false;
1818  found_unlock:
1819 	spin_unlock_irqrestore(&phy->lock, flags);
1820 	return true;
1821 }
1822 
1823 static bool d40_alloc_mask_free(struct d40_phy_res *phy, bool is_src,
1824 			       int log_event_line)
1825 {
1826 	unsigned long flags;
1827 	bool is_free = false;
1828 
1829 	spin_lock_irqsave(&phy->lock, flags);
1830 	if (!log_event_line) {
1831 		phy->allocated_dst = D40_ALLOC_FREE;
1832 		phy->allocated_src = D40_ALLOC_FREE;
1833 		is_free = true;
1834 		goto unlock;
1835 	}
1836 
1837 	/* Logical channel */
1838 	if (is_src) {
1839 		phy->allocated_src &= ~BIT(log_event_line);
1840 		if (phy->allocated_src == D40_ALLOC_LOG_FREE)
1841 			phy->allocated_src = D40_ALLOC_FREE;
1842 	} else {
1843 		phy->allocated_dst &= ~BIT(log_event_line);
1844 		if (phy->allocated_dst == D40_ALLOC_LOG_FREE)
1845 			phy->allocated_dst = D40_ALLOC_FREE;
1846 	}
1847 
1848 	is_free = ((phy->allocated_src | phy->allocated_dst) ==
1849 		   D40_ALLOC_FREE);
1850  unlock:
1851 	spin_unlock_irqrestore(&phy->lock, flags);
1852 
1853 	return is_free;
1854 }
1855 
1856 static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
1857 {
1858 	int dev_type = d40c->dma_cfg.dev_type;
1859 	int event_group;
1860 	int event_line;
1861 	struct d40_phy_res *phys;
1862 	int i;
1863 	int j;
1864 	int log_num;
1865 	int num_phy_chans;
1866 	bool is_src;
1867 	bool is_log = d40c->dma_cfg.mode == STEDMA40_MODE_LOGICAL;
1868 
1869 	phys = d40c->base->phy_res;
1870 	num_phy_chans = d40c->base->num_phy_chans;
1871 
1872 	if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
1873 		log_num = 2 * dev_type;
1874 		is_src = true;
1875 	} else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
1876 		   d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
1877 		/* dst event lines are used for logical memcpy */
1878 		log_num = 2 * dev_type + 1;
1879 		is_src = false;
1880 	} else
1881 		return -EINVAL;
1882 
1883 	event_group = D40_TYPE_TO_GROUP(dev_type);
1884 	event_line = D40_TYPE_TO_EVENT(dev_type);
1885 
1886 	if (!is_log) {
1887 		if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
1888 			/* Find physical half channel */
1889 			if (d40c->dma_cfg.use_fixed_channel) {
1890 				i = d40c->dma_cfg.phy_channel;
1891 				if (d40_alloc_mask_set(&phys[i], is_src,
1892 						       0, is_log,
1893 						       first_phy_user))
1894 					goto found_phy;
1895 			} else {
1896 				for (i = 0; i < num_phy_chans; i++) {
1897 					if (d40_alloc_mask_set(&phys[i], is_src,
1898 						       0, is_log,
1899 						       first_phy_user))
1900 						goto found_phy;
1901 				}
1902 			}
1903 		} else
1904 			for (j = 0; j < d40c->base->num_phy_chans; j += 8) {
1905 				int phy_num = j  + event_group * 2;
1906 				for (i = phy_num; i < phy_num + 2; i++) {
1907 					if (d40_alloc_mask_set(&phys[i],
1908 							       is_src,
1909 							       0,
1910 							       is_log,
1911 							       first_phy_user))
1912 						goto found_phy;
1913 				}
1914 			}
1915 		return -EINVAL;
1916 found_phy:
1917 		d40c->phy_chan = &phys[i];
1918 		d40c->log_num = D40_PHY_CHAN;
1919 		goto out;
1920 	}
1921 	if (dev_type == -1)
1922 		return -EINVAL;
1923 
1924 	/* Find logical channel */
1925 	for (j = 0; j < d40c->base->num_phy_chans; j += 8) {
1926 		int phy_num = j + event_group * 2;
1927 
1928 		if (d40c->dma_cfg.use_fixed_channel) {
1929 			i = d40c->dma_cfg.phy_channel;
1930 
1931 			if ((i != phy_num) && (i != phy_num + 1)) {
1932 				dev_err(chan2dev(d40c),
1933 					"invalid fixed phy channel %d\n", i);
1934 				return -EINVAL;
1935 			}
1936 
1937 			if (d40_alloc_mask_set(&phys[i], is_src, event_line,
1938 					       is_log, first_phy_user))
1939 				goto found_log;
1940 
1941 			dev_err(chan2dev(d40c),
1942 				"could not allocate fixed phy channel %d\n", i);
1943 			return -EINVAL;
1944 		}
1945 
1946 		/*
1947 		 * Spread logical channels across all available physical rather
1948 		 * than pack every logical channel at the first available phy
1949 		 * channels.
1950 		 */
1951 		if (is_src) {
1952 			for (i = phy_num; i < phy_num + 2; i++) {
1953 				if (d40_alloc_mask_set(&phys[i], is_src,
1954 						       event_line, is_log,
1955 						       first_phy_user))
1956 					goto found_log;
1957 			}
1958 		} else {
1959 			for (i = phy_num + 1; i >= phy_num; i--) {
1960 				if (d40_alloc_mask_set(&phys[i], is_src,
1961 						       event_line, is_log,
1962 						       first_phy_user))
1963 					goto found_log;
1964 			}
1965 		}
1966 	}
1967 	return -EINVAL;
1968 
1969 found_log:
1970 	d40c->phy_chan = &phys[i];
1971 	d40c->log_num = log_num;
1972 out:
1973 
1974 	if (is_log)
1975 		d40c->base->lookup_log_chans[d40c->log_num] = d40c;
1976 	else
1977 		d40c->base->lookup_phy_chans[d40c->phy_chan->num] = d40c;
1978 
1979 	return 0;
1980 
1981 }
1982 
1983 static int d40_config_memcpy(struct d40_chan *d40c)
1984 {
1985 	dma_cap_mask_t cap = d40c->chan.device->cap_mask;
1986 
1987 	if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) {
1988 		d40c->dma_cfg = dma40_memcpy_conf_log;
1989 		d40c->dma_cfg.dev_type = dma40_memcpy_channels[d40c->chan.chan_id];
1990 
1991 		d40_log_cfg(&d40c->dma_cfg,
1992 			    &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
1993 
1994 	} else if (dma_has_cap(DMA_MEMCPY, cap) &&
1995 		   dma_has_cap(DMA_SLAVE, cap)) {
1996 		d40c->dma_cfg = dma40_memcpy_conf_phy;
1997 
1998 		/* Generate interrupt at end of transfer or relink. */
1999 		d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS);
2000 
2001 		/* Generate interrupt on error. */
2002 		d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
2003 		d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
2004 
2005 	} else {
2006 		chan_err(d40c, "No memcpy\n");
2007 		return -EINVAL;
2008 	}
2009 
2010 	return 0;
2011 }
2012 
2013 static int d40_free_dma(struct d40_chan *d40c)
2014 {
2015 
2016 	int res = 0;
2017 	u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
2018 	struct d40_phy_res *phy = d40c->phy_chan;
2019 	bool is_src;
2020 
2021 	/* Terminate all queued and active transfers */
2022 	d40_term_all(d40c);
2023 
2024 	if (phy == NULL) {
2025 		chan_err(d40c, "phy == null\n");
2026 		return -EINVAL;
2027 	}
2028 
2029 	if (phy->allocated_src == D40_ALLOC_FREE &&
2030 	    phy->allocated_dst == D40_ALLOC_FREE) {
2031 		chan_err(d40c, "channel already free\n");
2032 		return -EINVAL;
2033 	}
2034 
2035 	if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
2036 	    d40c->dma_cfg.dir == DMA_MEM_TO_MEM)
2037 		is_src = false;
2038 	else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
2039 		is_src = true;
2040 	else {
2041 		chan_err(d40c, "Unknown direction\n");
2042 		return -EINVAL;
2043 	}
2044 
2045 	pm_runtime_get_sync(d40c->base->dev);
2046 	res = d40_channel_execute_command(d40c, D40_DMA_STOP);
2047 	if (res) {
2048 		chan_err(d40c, "stop failed\n");
2049 		goto mark_last_busy;
2050 	}
2051 
2052 	d40_alloc_mask_free(phy, is_src, chan_is_logical(d40c) ? event : 0);
2053 
2054 	if (chan_is_logical(d40c))
2055 		d40c->base->lookup_log_chans[d40c->log_num] = NULL;
2056 	else
2057 		d40c->base->lookup_phy_chans[phy->num] = NULL;
2058 
2059 	if (d40c->busy) {
2060 		pm_runtime_mark_last_busy(d40c->base->dev);
2061 		pm_runtime_put_autosuspend(d40c->base->dev);
2062 	}
2063 
2064 	d40c->busy = false;
2065 	d40c->phy_chan = NULL;
2066 	d40c->configured = false;
2067  mark_last_busy:
2068 	pm_runtime_mark_last_busy(d40c->base->dev);
2069 	pm_runtime_put_autosuspend(d40c->base->dev);
2070 	return res;
2071 }
2072 
2073 static bool d40_is_paused(struct d40_chan *d40c)
2074 {
2075 	void __iomem *chanbase = chan_base(d40c);
2076 	bool is_paused = false;
2077 	unsigned long flags;
2078 	void __iomem *active_reg;
2079 	u32 status;
2080 	u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
2081 
2082 	spin_lock_irqsave(&d40c->lock, flags);
2083 
2084 	if (chan_is_physical(d40c)) {
2085 		if (d40c->phy_chan->num % 2 == 0)
2086 			active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
2087 		else
2088 			active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
2089 
2090 		status = (readl(active_reg) &
2091 			  D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
2092 			D40_CHAN_POS(d40c->phy_chan->num);
2093 		if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP)
2094 			is_paused = true;
2095 		goto unlock;
2096 	}
2097 
2098 	if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
2099 	    d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
2100 		status = readl(chanbase + D40_CHAN_REG_SDLNK);
2101 	} else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
2102 		status = readl(chanbase + D40_CHAN_REG_SSLNK);
2103 	} else {
2104 		chan_err(d40c, "Unknown direction\n");
2105 		goto unlock;
2106 	}
2107 
2108 	status = (status & D40_EVENTLINE_MASK(event)) >>
2109 		D40_EVENTLINE_POS(event);
2110 
2111 	if (status != D40_DMA_RUN)
2112 		is_paused = true;
2113  unlock:
2114 	spin_unlock_irqrestore(&d40c->lock, flags);
2115 	return is_paused;
2116 
2117 }
2118 
2119 static u32 stedma40_residue(struct dma_chan *chan)
2120 {
2121 	struct d40_chan *d40c =
2122 		container_of(chan, struct d40_chan, chan);
2123 	u32 bytes_left;
2124 	unsigned long flags;
2125 
2126 	spin_lock_irqsave(&d40c->lock, flags);
2127 	bytes_left = d40_residue(d40c);
2128 	spin_unlock_irqrestore(&d40c->lock, flags);
2129 
2130 	return bytes_left;
2131 }
2132 
2133 static int
2134 d40_prep_sg_log(struct d40_chan *chan, struct d40_desc *desc,
2135 		struct scatterlist *sg_src, struct scatterlist *sg_dst,
2136 		unsigned int sg_len, dma_addr_t src_dev_addr,
2137 		dma_addr_t dst_dev_addr)
2138 {
2139 	struct stedma40_chan_cfg *cfg = &chan->dma_cfg;
2140 	struct stedma40_half_channel_info *src_info = &cfg->src_info;
2141 	struct stedma40_half_channel_info *dst_info = &cfg->dst_info;
2142 	int ret;
2143 
2144 	ret = d40_log_sg_to_lli(sg_src, sg_len,
2145 				src_dev_addr,
2146 				desc->lli_log.src,
2147 				chan->log_def.lcsp1,
2148 				src_info->data_width,
2149 				dst_info->data_width);
2150 
2151 	ret = d40_log_sg_to_lli(sg_dst, sg_len,
2152 				dst_dev_addr,
2153 				desc->lli_log.dst,
2154 				chan->log_def.lcsp3,
2155 				dst_info->data_width,
2156 				src_info->data_width);
2157 
2158 	return ret < 0 ? ret : 0;
2159 }
2160 
2161 static int
2162 d40_prep_sg_phy(struct d40_chan *chan, struct d40_desc *desc,
2163 		struct scatterlist *sg_src, struct scatterlist *sg_dst,
2164 		unsigned int sg_len, dma_addr_t src_dev_addr,
2165 		dma_addr_t dst_dev_addr)
2166 {
2167 	struct stedma40_chan_cfg *cfg = &chan->dma_cfg;
2168 	struct stedma40_half_channel_info *src_info = &cfg->src_info;
2169 	struct stedma40_half_channel_info *dst_info = &cfg->dst_info;
2170 	unsigned long flags = 0;
2171 	int ret;
2172 
2173 	if (desc->cyclic)
2174 		flags |= LLI_CYCLIC | LLI_TERM_INT;
2175 
2176 	ret = d40_phy_sg_to_lli(sg_src, sg_len, src_dev_addr,
2177 				desc->lli_phy.src,
2178 				virt_to_phys(desc->lli_phy.src),
2179 				chan->src_def_cfg,
2180 				src_info, dst_info, flags);
2181 
2182 	ret = d40_phy_sg_to_lli(sg_dst, sg_len, dst_dev_addr,
2183 				desc->lli_phy.dst,
2184 				virt_to_phys(desc->lli_phy.dst),
2185 				chan->dst_def_cfg,
2186 				dst_info, src_info, flags);
2187 
2188 	dma_sync_single_for_device(chan->base->dev, desc->lli_pool.dma_addr,
2189 				   desc->lli_pool.size, DMA_TO_DEVICE);
2190 
2191 	return ret < 0 ? ret : 0;
2192 }
2193 
2194 static struct d40_desc *
2195 d40_prep_desc(struct d40_chan *chan, struct scatterlist *sg,
2196 	      unsigned int sg_len, unsigned long dma_flags)
2197 {
2198 	struct stedma40_chan_cfg *cfg;
2199 	struct d40_desc *desc;
2200 	int ret;
2201 
2202 	desc = d40_desc_get(chan);
2203 	if (!desc)
2204 		return NULL;
2205 
2206 	cfg = &chan->dma_cfg;
2207 	desc->lli_len = d40_sg_2_dmalen(sg, sg_len, cfg->src_info.data_width,
2208 					cfg->dst_info.data_width);
2209 	if (desc->lli_len < 0) {
2210 		chan_err(chan, "Unaligned size\n");
2211 		goto free_desc;
2212 	}
2213 
2214 	ret = d40_pool_lli_alloc(chan, desc, desc->lli_len);
2215 	if (ret < 0) {
2216 		chan_err(chan, "Could not allocate lli\n");
2217 		goto free_desc;
2218 	}
2219 
2220 	desc->lli_current = 0;
2221 	desc->txd.flags = dma_flags;
2222 	desc->txd.tx_submit = d40_tx_submit;
2223 
2224 	dma_async_tx_descriptor_init(&desc->txd, &chan->chan);
2225 
2226 	return desc;
2227  free_desc:
2228 	d40_desc_free(chan, desc);
2229 	return NULL;
2230 }
2231 
2232 static struct dma_async_tx_descriptor *
2233 d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src,
2234 	    struct scatterlist *sg_dst, unsigned int sg_len,
2235 	    enum dma_transfer_direction direction, unsigned long dma_flags)
2236 {
2237 	struct d40_chan *chan = container_of(dchan, struct d40_chan, chan);
2238 	dma_addr_t src_dev_addr;
2239 	dma_addr_t dst_dev_addr;
2240 	struct d40_desc *desc;
2241 	unsigned long flags;
2242 	int ret;
2243 
2244 	if (!chan->phy_chan) {
2245 		chan_err(chan, "Cannot prepare unallocated channel\n");
2246 		return NULL;
2247 	}
2248 
2249 	d40_set_runtime_config_write(dchan, &chan->slave_config, direction);
2250 
2251 	spin_lock_irqsave(&chan->lock, flags);
2252 
2253 	desc = d40_prep_desc(chan, sg_src, sg_len, dma_flags);
2254 	if (desc == NULL)
2255 		goto unlock;
2256 
2257 	if (sg_next(&sg_src[sg_len - 1]) == sg_src)
2258 		desc->cyclic = true;
2259 
2260 	src_dev_addr = 0;
2261 	dst_dev_addr = 0;
2262 	if (direction == DMA_DEV_TO_MEM)
2263 		src_dev_addr = chan->runtime_addr;
2264 	else if (direction == DMA_MEM_TO_DEV)
2265 		dst_dev_addr = chan->runtime_addr;
2266 
2267 	if (chan_is_logical(chan))
2268 		ret = d40_prep_sg_log(chan, desc, sg_src, sg_dst,
2269 				      sg_len, src_dev_addr, dst_dev_addr);
2270 	else
2271 		ret = d40_prep_sg_phy(chan, desc, sg_src, sg_dst,
2272 				      sg_len, src_dev_addr, dst_dev_addr);
2273 
2274 	if (ret) {
2275 		chan_err(chan, "Failed to prepare %s sg job: %d\n",
2276 			 chan_is_logical(chan) ? "log" : "phy", ret);
2277 		goto free_desc;
2278 	}
2279 
2280 	/*
2281 	 * add descriptor to the prepare queue in order to be able
2282 	 * to free them later in terminate_all
2283 	 */
2284 	list_add_tail(&desc->node, &chan->prepare_queue);
2285 
2286 	spin_unlock_irqrestore(&chan->lock, flags);
2287 
2288 	return &desc->txd;
2289  free_desc:
2290 	d40_desc_free(chan, desc);
2291  unlock:
2292 	spin_unlock_irqrestore(&chan->lock, flags);
2293 	return NULL;
2294 }
2295 
2296 static bool stedma40_filter(struct dma_chan *chan, void *data)
2297 {
2298 	struct stedma40_chan_cfg *info = data;
2299 	struct d40_chan *d40c =
2300 		container_of(chan, struct d40_chan, chan);
2301 	int err;
2302 
2303 	if (data) {
2304 		err = d40_validate_conf(d40c, info);
2305 		if (!err)
2306 			d40c->dma_cfg = *info;
2307 	} else
2308 		err = d40_config_memcpy(d40c);
2309 
2310 	if (!err)
2311 		d40c->configured = true;
2312 
2313 	return err == 0;
2314 }
2315 
2316 static void __d40_set_prio_rt(struct d40_chan *d40c, int dev_type, bool src)
2317 {
2318 	bool realtime = d40c->dma_cfg.realtime;
2319 	bool highprio = d40c->dma_cfg.high_priority;
2320 	u32 rtreg;
2321 	u32 event = D40_TYPE_TO_EVENT(dev_type);
2322 	u32 group = D40_TYPE_TO_GROUP(dev_type);
2323 	u32 bit = BIT(event);
2324 	u32 prioreg;
2325 	struct d40_gen_dmac *dmac = &d40c->base->gen_dmac;
2326 
2327 	rtreg = realtime ? dmac->realtime_en : dmac->realtime_clear;
2328 	/*
2329 	 * Due to a hardware bug, in some cases a logical channel triggered by
2330 	 * a high priority destination event line can generate extra packet
2331 	 * transactions.
2332 	 *
2333 	 * The workaround is to not set the high priority level for the
2334 	 * destination event lines that trigger logical channels.
2335 	 */
2336 	if (!src && chan_is_logical(d40c))
2337 		highprio = false;
2338 
2339 	prioreg = highprio ? dmac->high_prio_en : dmac->high_prio_clear;
2340 
2341 	/* Destination event lines are stored in the upper halfword */
2342 	if (!src)
2343 		bit <<= 16;
2344 
2345 	writel(bit, d40c->base->virtbase + prioreg + group * 4);
2346 	writel(bit, d40c->base->virtbase + rtreg + group * 4);
2347 }
2348 
2349 static void d40_set_prio_realtime(struct d40_chan *d40c)
2350 {
2351 	if (d40c->base->rev < 3)
2352 		return;
2353 
2354 	if ((d40c->dma_cfg.dir ==  DMA_DEV_TO_MEM) ||
2355 	    (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
2356 		__d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true);
2357 
2358 	if ((d40c->dma_cfg.dir ==  DMA_MEM_TO_DEV) ||
2359 	    (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
2360 		__d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false);
2361 }
2362 
2363 #define D40_DT_FLAGS_MODE(flags)       ((flags >> 0) & 0x1)
2364 #define D40_DT_FLAGS_DIR(flags)        ((flags >> 1) & 0x1)
2365 #define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1)
2366 #define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1)
2367 #define D40_DT_FLAGS_HIGH_PRIO(flags)  ((flags >> 4) & 0x1)
2368 
2369 static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec,
2370 				  struct of_dma *ofdma)
2371 {
2372 	struct stedma40_chan_cfg cfg;
2373 	dma_cap_mask_t cap;
2374 	u32 flags;
2375 
2376 	memset(&cfg, 0, sizeof(struct stedma40_chan_cfg));
2377 
2378 	dma_cap_zero(cap);
2379 	dma_cap_set(DMA_SLAVE, cap);
2380 
2381 	cfg.dev_type = dma_spec->args[0];
2382 	flags = dma_spec->args[2];
2383 
2384 	switch (D40_DT_FLAGS_MODE(flags)) {
2385 	case 0: cfg.mode = STEDMA40_MODE_LOGICAL; break;
2386 	case 1: cfg.mode = STEDMA40_MODE_PHYSICAL; break;
2387 	}
2388 
2389 	switch (D40_DT_FLAGS_DIR(flags)) {
2390 	case 0:
2391 		cfg.dir = DMA_MEM_TO_DEV;
2392 		cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
2393 		break;
2394 	case 1:
2395 		cfg.dir = DMA_DEV_TO_MEM;
2396 		cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
2397 		break;
2398 	}
2399 
2400 	if (D40_DT_FLAGS_FIXED_CHAN(flags)) {
2401 		cfg.phy_channel = dma_spec->args[1];
2402 		cfg.use_fixed_channel = true;
2403 	}
2404 
2405 	if (D40_DT_FLAGS_HIGH_PRIO(flags))
2406 		cfg.high_priority = true;
2407 
2408 	return dma_request_channel(cap, stedma40_filter, &cfg);
2409 }
2410 
2411 /* DMA ENGINE functions */
2412 static int d40_alloc_chan_resources(struct dma_chan *chan)
2413 {
2414 	int err;
2415 	unsigned long flags;
2416 	struct d40_chan *d40c =
2417 		container_of(chan, struct d40_chan, chan);
2418 	bool is_free_phy;
2419 	spin_lock_irqsave(&d40c->lock, flags);
2420 
2421 	dma_cookie_init(chan);
2422 
2423 	/* If no dma configuration is set use default configuration (memcpy) */
2424 	if (!d40c->configured) {
2425 		err = d40_config_memcpy(d40c);
2426 		if (err) {
2427 			chan_err(d40c, "Failed to configure memcpy channel\n");
2428 			goto mark_last_busy;
2429 		}
2430 	}
2431 
2432 	err = d40_allocate_channel(d40c, &is_free_phy);
2433 	if (err) {
2434 		chan_err(d40c, "Failed to allocate channel\n");
2435 		d40c->configured = false;
2436 		goto mark_last_busy;
2437 	}
2438 
2439 	pm_runtime_get_sync(d40c->base->dev);
2440 
2441 	d40_set_prio_realtime(d40c);
2442 
2443 	if (chan_is_logical(d40c)) {
2444 		if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
2445 			d40c->lcpa = d40c->base->lcpa_base +
2446 				d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE;
2447 		else
2448 			d40c->lcpa = d40c->base->lcpa_base +
2449 				d40c->dma_cfg.dev_type *
2450 				D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA;
2451 
2452 		/* Unmask the Global Interrupt Mask. */
2453 		d40c->src_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS);
2454 		d40c->dst_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS);
2455 	}
2456 
2457 	dev_dbg(chan2dev(d40c), "allocated %s channel (phy %d%s)\n",
2458 		 chan_is_logical(d40c) ? "logical" : "physical",
2459 		 d40c->phy_chan->num,
2460 		 d40c->dma_cfg.use_fixed_channel ? ", fixed" : "");
2461 
2462 
2463 	/*
2464 	 * Only write channel configuration to the DMA if the physical
2465 	 * resource is free. In case of multiple logical channels
2466 	 * on the same physical resource, only the first write is necessary.
2467 	 */
2468 	if (is_free_phy)
2469 		d40_config_write(d40c);
2470  mark_last_busy:
2471 	pm_runtime_mark_last_busy(d40c->base->dev);
2472 	pm_runtime_put_autosuspend(d40c->base->dev);
2473 	spin_unlock_irqrestore(&d40c->lock, flags);
2474 	return err;
2475 }
2476 
2477 static void d40_free_chan_resources(struct dma_chan *chan)
2478 {
2479 	struct d40_chan *d40c =
2480 		container_of(chan, struct d40_chan, chan);
2481 	int err;
2482 	unsigned long flags;
2483 
2484 	if (d40c->phy_chan == NULL) {
2485 		chan_err(d40c, "Cannot free unallocated channel\n");
2486 		return;
2487 	}
2488 
2489 	spin_lock_irqsave(&d40c->lock, flags);
2490 
2491 	err = d40_free_dma(d40c);
2492 
2493 	if (err)
2494 		chan_err(d40c, "Failed to free channel\n");
2495 	spin_unlock_irqrestore(&d40c->lock, flags);
2496 }
2497 
2498 static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan,
2499 						       dma_addr_t dst,
2500 						       dma_addr_t src,
2501 						       size_t size,
2502 						       unsigned long dma_flags)
2503 {
2504 	struct scatterlist dst_sg;
2505 	struct scatterlist src_sg;
2506 
2507 	sg_init_table(&dst_sg, 1);
2508 	sg_init_table(&src_sg, 1);
2509 
2510 	sg_dma_address(&dst_sg) = dst;
2511 	sg_dma_address(&src_sg) = src;
2512 
2513 	sg_dma_len(&dst_sg) = size;
2514 	sg_dma_len(&src_sg) = size;
2515 
2516 	return d40_prep_sg(chan, &src_sg, &dst_sg, 1,
2517 			   DMA_MEM_TO_MEM, dma_flags);
2518 }
2519 
2520 static struct dma_async_tx_descriptor *
2521 d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2522 		  unsigned int sg_len, enum dma_transfer_direction direction,
2523 		  unsigned long dma_flags, void *context)
2524 {
2525 	if (!is_slave_direction(direction))
2526 		return NULL;
2527 
2528 	return d40_prep_sg(chan, sgl, sgl, sg_len, direction, dma_flags);
2529 }
2530 
2531 static struct dma_async_tx_descriptor *
2532 dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr,
2533 		     size_t buf_len, size_t period_len,
2534 		     enum dma_transfer_direction direction, unsigned long flags)
2535 {
2536 	unsigned int periods = buf_len / period_len;
2537 	struct dma_async_tx_descriptor *txd;
2538 	struct scatterlist *sg;
2539 	int i;
2540 
2541 	sg = kcalloc(periods + 1, sizeof(struct scatterlist), GFP_NOWAIT);
2542 	if (!sg)
2543 		return NULL;
2544 
2545 	for (i = 0; i < periods; i++) {
2546 		sg_dma_address(&sg[i]) = dma_addr;
2547 		sg_dma_len(&sg[i]) = period_len;
2548 		dma_addr += period_len;
2549 	}
2550 
2551 	sg_chain(sg, periods + 1, sg);
2552 
2553 	txd = d40_prep_sg(chan, sg, sg, periods, direction,
2554 			  DMA_PREP_INTERRUPT);
2555 
2556 	kfree(sg);
2557 
2558 	return txd;
2559 }
2560 
2561 static enum dma_status d40_tx_status(struct dma_chan *chan,
2562 				     dma_cookie_t cookie,
2563 				     struct dma_tx_state *txstate)
2564 {
2565 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2566 	enum dma_status ret;
2567 
2568 	if (d40c->phy_chan == NULL) {
2569 		chan_err(d40c, "Cannot read status of unallocated channel\n");
2570 		return -EINVAL;
2571 	}
2572 
2573 	ret = dma_cookie_status(chan, cookie, txstate);
2574 	if (ret != DMA_COMPLETE && txstate)
2575 		dma_set_residue(txstate, stedma40_residue(chan));
2576 
2577 	if (d40_is_paused(d40c))
2578 		ret = DMA_PAUSED;
2579 
2580 	return ret;
2581 }
2582 
2583 static void d40_issue_pending(struct dma_chan *chan)
2584 {
2585 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2586 	unsigned long flags;
2587 
2588 	if (d40c->phy_chan == NULL) {
2589 		chan_err(d40c, "Channel is not allocated!\n");
2590 		return;
2591 	}
2592 
2593 	spin_lock_irqsave(&d40c->lock, flags);
2594 
2595 	list_splice_tail_init(&d40c->pending_queue, &d40c->queue);
2596 
2597 	/* Busy means that queued jobs are already being processed */
2598 	if (!d40c->busy)
2599 		(void) d40_queue_start(d40c);
2600 
2601 	spin_unlock_irqrestore(&d40c->lock, flags);
2602 }
2603 
2604 static int d40_terminate_all(struct dma_chan *chan)
2605 {
2606 	unsigned long flags;
2607 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2608 	int ret;
2609 
2610 	if (d40c->phy_chan == NULL) {
2611 		chan_err(d40c, "Channel is not allocated!\n");
2612 		return -EINVAL;
2613 	}
2614 
2615 	spin_lock_irqsave(&d40c->lock, flags);
2616 
2617 	pm_runtime_get_sync(d40c->base->dev);
2618 	ret = d40_channel_execute_command(d40c, D40_DMA_STOP);
2619 	if (ret)
2620 		chan_err(d40c, "Failed to stop channel\n");
2621 
2622 	d40_term_all(d40c);
2623 	pm_runtime_mark_last_busy(d40c->base->dev);
2624 	pm_runtime_put_autosuspend(d40c->base->dev);
2625 	if (d40c->busy) {
2626 		pm_runtime_mark_last_busy(d40c->base->dev);
2627 		pm_runtime_put_autosuspend(d40c->base->dev);
2628 	}
2629 	d40c->busy = false;
2630 
2631 	spin_unlock_irqrestore(&d40c->lock, flags);
2632 	return 0;
2633 }
2634 
2635 static int
2636 dma40_config_to_halfchannel(struct d40_chan *d40c,
2637 			    struct stedma40_half_channel_info *info,
2638 			    u32 maxburst)
2639 {
2640 	int psize;
2641 
2642 	if (chan_is_logical(d40c)) {
2643 		if (maxburst >= 16)
2644 			psize = STEDMA40_PSIZE_LOG_16;
2645 		else if (maxburst >= 8)
2646 			psize = STEDMA40_PSIZE_LOG_8;
2647 		else if (maxburst >= 4)
2648 			psize = STEDMA40_PSIZE_LOG_4;
2649 		else
2650 			psize = STEDMA40_PSIZE_LOG_1;
2651 	} else {
2652 		if (maxburst >= 16)
2653 			psize = STEDMA40_PSIZE_PHY_16;
2654 		else if (maxburst >= 8)
2655 			psize = STEDMA40_PSIZE_PHY_8;
2656 		else if (maxburst >= 4)
2657 			psize = STEDMA40_PSIZE_PHY_4;
2658 		else
2659 			psize = STEDMA40_PSIZE_PHY_1;
2660 	}
2661 
2662 	info->psize = psize;
2663 	info->flow_ctrl = STEDMA40_NO_FLOW_CTRL;
2664 
2665 	return 0;
2666 }
2667 
2668 static int d40_set_runtime_config(struct dma_chan *chan,
2669 				  struct dma_slave_config *config)
2670 {
2671 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2672 
2673 	memcpy(&d40c->slave_config, config, sizeof(*config));
2674 
2675 	return 0;
2676 }
2677 
2678 /* Runtime reconfiguration extension */
2679 static int d40_set_runtime_config_write(struct dma_chan *chan,
2680 				  struct dma_slave_config *config,
2681 				  enum dma_transfer_direction direction)
2682 {
2683 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2684 	struct stedma40_chan_cfg *cfg = &d40c->dma_cfg;
2685 	enum dma_slave_buswidth src_addr_width, dst_addr_width;
2686 	dma_addr_t config_addr;
2687 	u32 src_maxburst, dst_maxburst;
2688 	int ret;
2689 
2690 	if (d40c->phy_chan == NULL) {
2691 		chan_err(d40c, "Channel is not allocated!\n");
2692 		return -EINVAL;
2693 	}
2694 
2695 	src_addr_width = config->src_addr_width;
2696 	src_maxburst = config->src_maxburst;
2697 	dst_addr_width = config->dst_addr_width;
2698 	dst_maxburst = config->dst_maxburst;
2699 
2700 	if (direction == DMA_DEV_TO_MEM) {
2701 		config_addr = config->src_addr;
2702 
2703 		if (cfg->dir != DMA_DEV_TO_MEM)
2704 			dev_dbg(d40c->base->dev,
2705 				"channel was not configured for peripheral "
2706 				"to memory transfer (%d) overriding\n",
2707 				cfg->dir);
2708 		cfg->dir = DMA_DEV_TO_MEM;
2709 
2710 		/* Configure the memory side */
2711 		if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
2712 			dst_addr_width = src_addr_width;
2713 		if (dst_maxburst == 0)
2714 			dst_maxburst = src_maxburst;
2715 
2716 	} else if (direction == DMA_MEM_TO_DEV) {
2717 		config_addr = config->dst_addr;
2718 
2719 		if (cfg->dir != DMA_MEM_TO_DEV)
2720 			dev_dbg(d40c->base->dev,
2721 				"channel was not configured for memory "
2722 				"to peripheral transfer (%d) overriding\n",
2723 				cfg->dir);
2724 		cfg->dir = DMA_MEM_TO_DEV;
2725 
2726 		/* Configure the memory side */
2727 		if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
2728 			src_addr_width = dst_addr_width;
2729 		if (src_maxburst == 0)
2730 			src_maxburst = dst_maxburst;
2731 	} else {
2732 		dev_err(d40c->base->dev,
2733 			"unrecognized channel direction %d\n",
2734 			direction);
2735 		return -EINVAL;
2736 	}
2737 
2738 	if (config_addr <= 0) {
2739 		dev_err(d40c->base->dev, "no address supplied\n");
2740 		return -EINVAL;
2741 	}
2742 
2743 	if (src_maxburst * src_addr_width != dst_maxburst * dst_addr_width) {
2744 		dev_err(d40c->base->dev,
2745 			"src/dst width/maxburst mismatch: %d*%d != %d*%d\n",
2746 			src_maxburst,
2747 			src_addr_width,
2748 			dst_maxburst,
2749 			dst_addr_width);
2750 		return -EINVAL;
2751 	}
2752 
2753 	if (src_maxburst > 16) {
2754 		src_maxburst = 16;
2755 		dst_maxburst = src_maxburst * src_addr_width / dst_addr_width;
2756 	} else if (dst_maxburst > 16) {
2757 		dst_maxburst = 16;
2758 		src_maxburst = dst_maxburst * dst_addr_width / src_addr_width;
2759 	}
2760 
2761 	/* Only valid widths are; 1, 2, 4 and 8. */
2762 	if (src_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
2763 	    src_addr_width >  DMA_SLAVE_BUSWIDTH_8_BYTES   ||
2764 	    dst_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
2765 	    dst_addr_width >  DMA_SLAVE_BUSWIDTH_8_BYTES   ||
2766 	    !is_power_of_2(src_addr_width) ||
2767 	    !is_power_of_2(dst_addr_width))
2768 		return -EINVAL;
2769 
2770 	cfg->src_info.data_width = src_addr_width;
2771 	cfg->dst_info.data_width = dst_addr_width;
2772 
2773 	ret = dma40_config_to_halfchannel(d40c, &cfg->src_info,
2774 					  src_maxburst);
2775 	if (ret)
2776 		return ret;
2777 
2778 	ret = dma40_config_to_halfchannel(d40c, &cfg->dst_info,
2779 					  dst_maxburst);
2780 	if (ret)
2781 		return ret;
2782 
2783 	/* Fill in register values */
2784 	if (chan_is_logical(d40c))
2785 		d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
2786 	else
2787 		d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg);
2788 
2789 	/* These settings will take precedence later */
2790 	d40c->runtime_addr = config_addr;
2791 	d40c->runtime_direction = direction;
2792 	dev_dbg(d40c->base->dev,
2793 		"configured channel %s for %s, data width %d/%d, "
2794 		"maxburst %d/%d elements, LE, no flow control\n",
2795 		dma_chan_name(chan),
2796 		(direction == DMA_DEV_TO_MEM) ? "RX" : "TX",
2797 		src_addr_width, dst_addr_width,
2798 		src_maxburst, dst_maxburst);
2799 
2800 	return 0;
2801 }
2802 
2803 /* Initialization functions */
2804 
2805 static void __init d40_chan_init(struct d40_base *base, struct dma_device *dma,
2806 				 struct d40_chan *chans, int offset,
2807 				 int num_chans)
2808 {
2809 	int i = 0;
2810 	struct d40_chan *d40c;
2811 
2812 	INIT_LIST_HEAD(&dma->channels);
2813 
2814 	for (i = offset; i < offset + num_chans; i++) {
2815 		d40c = &chans[i];
2816 		d40c->base = base;
2817 		d40c->chan.device = dma;
2818 
2819 		spin_lock_init(&d40c->lock);
2820 
2821 		d40c->log_num = D40_PHY_CHAN;
2822 
2823 		INIT_LIST_HEAD(&d40c->done);
2824 		INIT_LIST_HEAD(&d40c->active);
2825 		INIT_LIST_HEAD(&d40c->queue);
2826 		INIT_LIST_HEAD(&d40c->pending_queue);
2827 		INIT_LIST_HEAD(&d40c->client);
2828 		INIT_LIST_HEAD(&d40c->prepare_queue);
2829 
2830 		tasklet_setup(&d40c->tasklet, dma_tasklet);
2831 
2832 		list_add_tail(&d40c->chan.device_node,
2833 			      &dma->channels);
2834 	}
2835 }
2836 
2837 static void d40_ops_init(struct d40_base *base, struct dma_device *dev)
2838 {
2839 	if (dma_has_cap(DMA_SLAVE, dev->cap_mask)) {
2840 		dev->device_prep_slave_sg = d40_prep_slave_sg;
2841 		dev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
2842 	}
2843 
2844 	if (dma_has_cap(DMA_MEMCPY, dev->cap_mask)) {
2845 		dev->device_prep_dma_memcpy = d40_prep_memcpy;
2846 		dev->directions = BIT(DMA_MEM_TO_MEM);
2847 		/*
2848 		 * This controller can only access address at even
2849 		 * 32bit boundaries, i.e. 2^2
2850 		 */
2851 		dev->copy_align = DMAENGINE_ALIGN_4_BYTES;
2852 	}
2853 
2854 	if (dma_has_cap(DMA_CYCLIC, dev->cap_mask))
2855 		dev->device_prep_dma_cyclic = dma40_prep_dma_cyclic;
2856 
2857 	dev->device_alloc_chan_resources = d40_alloc_chan_resources;
2858 	dev->device_free_chan_resources = d40_free_chan_resources;
2859 	dev->device_issue_pending = d40_issue_pending;
2860 	dev->device_tx_status = d40_tx_status;
2861 	dev->device_config = d40_set_runtime_config;
2862 	dev->device_pause = d40_pause;
2863 	dev->device_resume = d40_resume;
2864 	dev->device_terminate_all = d40_terminate_all;
2865 	dev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
2866 	dev->dev = base->dev;
2867 }
2868 
2869 static int __init d40_dmaengine_init(struct d40_base *base,
2870 				     int num_reserved_chans)
2871 {
2872 	int err ;
2873 
2874 	d40_chan_init(base, &base->dma_slave, base->log_chans,
2875 		      0, base->num_log_chans);
2876 
2877 	dma_cap_zero(base->dma_slave.cap_mask);
2878 	dma_cap_set(DMA_SLAVE, base->dma_slave.cap_mask);
2879 	dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask);
2880 
2881 	d40_ops_init(base, &base->dma_slave);
2882 
2883 	err = dmaenginem_async_device_register(&base->dma_slave);
2884 
2885 	if (err) {
2886 		d40_err(base->dev, "Failed to register slave channels\n");
2887 		goto exit;
2888 	}
2889 
2890 	d40_chan_init(base, &base->dma_memcpy, base->log_chans,
2891 		      base->num_log_chans, base->num_memcpy_chans);
2892 
2893 	dma_cap_zero(base->dma_memcpy.cap_mask);
2894 	dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask);
2895 
2896 	d40_ops_init(base, &base->dma_memcpy);
2897 
2898 	err = dmaenginem_async_device_register(&base->dma_memcpy);
2899 
2900 	if (err) {
2901 		d40_err(base->dev,
2902 			"Failed to register memcpy only channels\n");
2903 		goto exit;
2904 	}
2905 
2906 	d40_chan_init(base, &base->dma_both, base->phy_chans,
2907 		      0, num_reserved_chans);
2908 
2909 	dma_cap_zero(base->dma_both.cap_mask);
2910 	dma_cap_set(DMA_SLAVE, base->dma_both.cap_mask);
2911 	dma_cap_set(DMA_MEMCPY, base->dma_both.cap_mask);
2912 	dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask);
2913 
2914 	d40_ops_init(base, &base->dma_both);
2915 	err = dmaenginem_async_device_register(&base->dma_both);
2916 
2917 	if (err) {
2918 		d40_err(base->dev,
2919 			"Failed to register logical and physical capable channels\n");
2920 		goto exit;
2921 	}
2922 	return 0;
2923  exit:
2924 	return err;
2925 }
2926 
2927 /* Suspend resume functionality */
2928 #ifdef CONFIG_PM_SLEEP
2929 static int dma40_suspend(struct device *dev)
2930 {
2931 	struct d40_base *base = dev_get_drvdata(dev);
2932 	int ret;
2933 
2934 	ret = pm_runtime_force_suspend(dev);
2935 	if (ret)
2936 		return ret;
2937 
2938 	if (base->lcpa_regulator)
2939 		ret = regulator_disable(base->lcpa_regulator);
2940 	return ret;
2941 }
2942 
2943 static int dma40_resume(struct device *dev)
2944 {
2945 	struct d40_base *base = dev_get_drvdata(dev);
2946 	int ret = 0;
2947 
2948 	if (base->lcpa_regulator) {
2949 		ret = regulator_enable(base->lcpa_regulator);
2950 		if (ret)
2951 			return ret;
2952 	}
2953 
2954 	return pm_runtime_force_resume(dev);
2955 }
2956 #endif
2957 
2958 #ifdef CONFIG_PM
2959 static void dma40_backup(void __iomem *baseaddr, u32 *backup,
2960 			 u32 *regaddr, int num, bool save)
2961 {
2962 	int i;
2963 
2964 	for (i = 0; i < num; i++) {
2965 		void __iomem *addr = baseaddr + regaddr[i];
2966 
2967 		if (save)
2968 			backup[i] = readl_relaxed(addr);
2969 		else
2970 			writel_relaxed(backup[i], addr);
2971 	}
2972 }
2973 
2974 static void d40_save_restore_registers(struct d40_base *base, bool save)
2975 {
2976 	int i;
2977 
2978 	/* Save/Restore channel specific registers */
2979 	for (i = 0; i < base->num_phy_chans; i++) {
2980 		void __iomem *addr;
2981 		int idx;
2982 
2983 		if (base->phy_res[i].reserved)
2984 			continue;
2985 
2986 		addr = base->virtbase + D40_DREG_PCBASE + i * D40_DREG_PCDELTA;
2987 		idx = i * ARRAY_SIZE(d40_backup_regs_chan);
2988 
2989 		dma40_backup(addr, &base->reg_val_backup_chan[idx],
2990 			     d40_backup_regs_chan,
2991 			     ARRAY_SIZE(d40_backup_regs_chan),
2992 			     save);
2993 	}
2994 
2995 	/* Save/Restore global registers */
2996 	dma40_backup(base->virtbase, base->reg_val_backup,
2997 		     d40_backup_regs, ARRAY_SIZE(d40_backup_regs),
2998 		     save);
2999 
3000 	/* Save/Restore registers only existing on dma40 v3 and later */
3001 	if (base->gen_dmac.backup)
3002 		dma40_backup(base->virtbase, base->reg_val_backup_v4,
3003 			     base->gen_dmac.backup,
3004 			base->gen_dmac.backup_size,
3005 			save);
3006 }
3007 
3008 static int dma40_runtime_suspend(struct device *dev)
3009 {
3010 	struct d40_base *base = dev_get_drvdata(dev);
3011 
3012 	d40_save_restore_registers(base, true);
3013 
3014 	/* Don't disable/enable clocks for v1 due to HW bugs */
3015 	if (base->rev != 1)
3016 		writel_relaxed(base->gcc_pwr_off_mask,
3017 			       base->virtbase + D40_DREG_GCC);
3018 
3019 	return 0;
3020 }
3021 
3022 static int dma40_runtime_resume(struct device *dev)
3023 {
3024 	struct d40_base *base = dev_get_drvdata(dev);
3025 
3026 	d40_save_restore_registers(base, false);
3027 
3028 	writel_relaxed(D40_DREG_GCC_ENABLE_ALL,
3029 		       base->virtbase + D40_DREG_GCC);
3030 	return 0;
3031 }
3032 #endif
3033 
3034 static const struct dev_pm_ops dma40_pm_ops = {
3035 	SET_LATE_SYSTEM_SLEEP_PM_OPS(dma40_suspend, dma40_resume)
3036 	SET_RUNTIME_PM_OPS(dma40_runtime_suspend,
3037 				dma40_runtime_resume,
3038 				NULL)
3039 };
3040 
3041 /* Initialization functions. */
3042 
3043 static int __init d40_phy_res_init(struct d40_base *base)
3044 {
3045 	int i;
3046 	int num_phy_chans_avail = 0;
3047 	u32 val[2];
3048 	int odd_even_bit = -2;
3049 	int gcc = D40_DREG_GCC_ENA;
3050 
3051 	val[0] = readl(base->virtbase + D40_DREG_PRSME);
3052 	val[1] = readl(base->virtbase + D40_DREG_PRSMO);
3053 
3054 	for (i = 0; i < base->num_phy_chans; i++) {
3055 		base->phy_res[i].num = i;
3056 		odd_even_bit += 2 * ((i % 2) == 0);
3057 		if (((val[i % 2] >> odd_even_bit) & 3) == 1) {
3058 			/* Mark security only channels as occupied */
3059 			base->phy_res[i].allocated_src = D40_ALLOC_PHY;
3060 			base->phy_res[i].allocated_dst = D40_ALLOC_PHY;
3061 			base->phy_res[i].reserved = true;
3062 			gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i),
3063 						       D40_DREG_GCC_SRC);
3064 			gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i),
3065 						       D40_DREG_GCC_DST);
3066 
3067 
3068 		} else {
3069 			base->phy_res[i].allocated_src = D40_ALLOC_FREE;
3070 			base->phy_res[i].allocated_dst = D40_ALLOC_FREE;
3071 			base->phy_res[i].reserved = false;
3072 			num_phy_chans_avail++;
3073 		}
3074 		spin_lock_init(&base->phy_res[i].lock);
3075 	}
3076 
3077 	/* Mark disabled channels as occupied */
3078 	for (i = 0; base->plat_data->disabled_channels[i] != -1; i++) {
3079 		int chan = base->plat_data->disabled_channels[i];
3080 
3081 		base->phy_res[chan].allocated_src = D40_ALLOC_PHY;
3082 		base->phy_res[chan].allocated_dst = D40_ALLOC_PHY;
3083 		base->phy_res[chan].reserved = true;
3084 		gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan),
3085 					       D40_DREG_GCC_SRC);
3086 		gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan),
3087 					       D40_DREG_GCC_DST);
3088 		num_phy_chans_avail--;
3089 	}
3090 
3091 	/* Mark soft_lli channels */
3092 	for (i = 0; i < base->plat_data->num_of_soft_lli_chans; i++) {
3093 		int chan = base->plat_data->soft_lli_chans[i];
3094 
3095 		base->phy_res[chan].use_soft_lli = true;
3096 	}
3097 
3098 	dev_info(base->dev, "%d of %d physical DMA channels available\n",
3099 		 num_phy_chans_avail, base->num_phy_chans);
3100 
3101 	/* Verify settings extended vs standard */
3102 	val[0] = readl(base->virtbase + D40_DREG_PRTYP);
3103 
3104 	for (i = 0; i < base->num_phy_chans; i++) {
3105 
3106 		if (base->phy_res[i].allocated_src == D40_ALLOC_FREE &&
3107 		    (val[0] & 0x3) != 1)
3108 			dev_info(base->dev,
3109 				 "[%s] INFO: channel %d is misconfigured (%d)\n",
3110 				 __func__, i, val[0] & 0x3);
3111 
3112 		val[0] = val[0] >> 2;
3113 	}
3114 
3115 	/*
3116 	 * To keep things simple, Enable all clocks initially.
3117 	 * The clocks will get managed later post channel allocation.
3118 	 * The clocks for the event lines on which reserved channels exists
3119 	 * are not managed here.
3120 	 */
3121 	writel(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC);
3122 	base->gcc_pwr_off_mask = gcc;
3123 
3124 	return num_phy_chans_avail;
3125 }
3126 
3127 /* Called from the registered devm action */
3128 static void d40_drop_kmem_cache_action(void *d)
3129 {
3130 	struct kmem_cache *desc_slab = d;
3131 
3132 	kmem_cache_destroy(desc_slab);
3133 }
3134 
3135 static int __init d40_hw_detect_init(struct platform_device *pdev,
3136 				     struct d40_base **retbase)
3137 {
3138 	struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev);
3139 	struct device *dev = &pdev->dev;
3140 	struct clk *clk;
3141 	void __iomem *virtbase;
3142 	struct d40_base *base;
3143 	int num_log_chans;
3144 	int num_phy_chans;
3145 	int num_memcpy_chans;
3146 	int i;
3147 	u32 pid;
3148 	u32 cid;
3149 	u8 rev;
3150 	int ret;
3151 
3152 	clk = devm_clk_get_enabled(dev, NULL);
3153 	if (IS_ERR(clk))
3154 		return PTR_ERR(clk);
3155 
3156 	/* Get IO for DMAC base address */
3157 	virtbase = devm_platform_ioremap_resource_byname(pdev, "base");
3158 	if (IS_ERR(virtbase))
3159 		return PTR_ERR(virtbase);
3160 
3161 	/* This is just a regular AMBA PrimeCell ID actually */
3162 	for (pid = 0, i = 0; i < 4; i++)
3163 		pid |= (readl(virtbase + SZ_4K - 0x20 + 4 * i)
3164 			& 255) << (i * 8);
3165 	for (cid = 0, i = 0; i < 4; i++)
3166 		cid |= (readl(virtbase + SZ_4K - 0x10 + 4 * i)
3167 			& 255) << (i * 8);
3168 
3169 	if (cid != AMBA_CID) {
3170 		d40_err(dev, "Unknown hardware! No PrimeCell ID\n");
3171 		return -EINVAL;
3172 	}
3173 	if (AMBA_MANF_BITS(pid) != AMBA_VENDOR_ST) {
3174 		d40_err(dev, "Unknown designer! Got %x wanted %x\n",
3175 			AMBA_MANF_BITS(pid),
3176 			AMBA_VENDOR_ST);
3177 		return -EINVAL;
3178 	}
3179 	/*
3180 	 * HW revision:
3181 	 * DB8500ed has revision 0
3182 	 * ? has revision 1
3183 	 * DB8500v1 has revision 2
3184 	 * DB8500v2 has revision 3
3185 	 * AP9540v1 has revision 4
3186 	 * DB8540v1 has revision 4
3187 	 */
3188 	rev = AMBA_REV_BITS(pid);
3189 	if (rev < 2) {
3190 		d40_err(dev, "hardware revision: %d is not supported", rev);
3191 		return -EINVAL;
3192 	}
3193 
3194 	/* The number of physical channels on this HW */
3195 	if (plat_data->num_of_phy_chans)
3196 		num_phy_chans = plat_data->num_of_phy_chans;
3197 	else
3198 		num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4;
3199 
3200 	/* The number of channels used for memcpy */
3201 	if (plat_data->num_of_memcpy_chans)
3202 		num_memcpy_chans = plat_data->num_of_memcpy_chans;
3203 	else
3204 		num_memcpy_chans = ARRAY_SIZE(dma40_memcpy_channels);
3205 
3206 	num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY;
3207 
3208 	dev_info(dev,
3209 		 "hardware rev: %d with %d physical and %d logical channels\n",
3210 		 rev, num_phy_chans, num_log_chans);
3211 
3212 	base = devm_kzalloc(dev,
3213 		ALIGN(sizeof(struct d40_base), 4) +
3214 		(num_phy_chans + num_log_chans + num_memcpy_chans) *
3215 		sizeof(struct d40_chan), GFP_KERNEL);
3216 
3217 	if (!base)
3218 		return -ENOMEM;
3219 
3220 	base->rev = rev;
3221 	base->clk = clk;
3222 	base->num_memcpy_chans = num_memcpy_chans;
3223 	base->num_phy_chans = num_phy_chans;
3224 	base->num_log_chans = num_log_chans;
3225 	base->virtbase = virtbase;
3226 	base->plat_data = plat_data;
3227 	base->dev = dev;
3228 	base->phy_chans = ((void *)base) + ALIGN(sizeof(struct d40_base), 4);
3229 	base->log_chans = &base->phy_chans[num_phy_chans];
3230 
3231 	if (base->plat_data->num_of_phy_chans == 14) {
3232 		base->gen_dmac.backup = d40_backup_regs_v4b;
3233 		base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4B;
3234 		base->gen_dmac.interrupt_en = D40_DREG_CPCMIS;
3235 		base->gen_dmac.interrupt_clear = D40_DREG_CPCICR;
3236 		base->gen_dmac.realtime_en = D40_DREG_CRSEG1;
3237 		base->gen_dmac.realtime_clear = D40_DREG_CRCEG1;
3238 		base->gen_dmac.high_prio_en = D40_DREG_CPSEG1;
3239 		base->gen_dmac.high_prio_clear = D40_DREG_CPCEG1;
3240 		base->gen_dmac.il = il_v4b;
3241 		base->gen_dmac.il_size = ARRAY_SIZE(il_v4b);
3242 		base->gen_dmac.init_reg = dma_init_reg_v4b;
3243 		base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4b);
3244 	} else {
3245 		if (base->rev >= 3) {
3246 			base->gen_dmac.backup = d40_backup_regs_v4a;
3247 			base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4A;
3248 		}
3249 		base->gen_dmac.interrupt_en = D40_DREG_PCMIS;
3250 		base->gen_dmac.interrupt_clear = D40_DREG_PCICR;
3251 		base->gen_dmac.realtime_en = D40_DREG_RSEG1;
3252 		base->gen_dmac.realtime_clear = D40_DREG_RCEG1;
3253 		base->gen_dmac.high_prio_en = D40_DREG_PSEG1;
3254 		base->gen_dmac.high_prio_clear = D40_DREG_PCEG1;
3255 		base->gen_dmac.il = il_v4a;
3256 		base->gen_dmac.il_size = ARRAY_SIZE(il_v4a);
3257 		base->gen_dmac.init_reg = dma_init_reg_v4a;
3258 		base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4a);
3259 	}
3260 
3261 	base->phy_res = devm_kcalloc(dev, num_phy_chans,
3262 				     sizeof(*base->phy_res),
3263 				     GFP_KERNEL);
3264 	if (!base->phy_res)
3265 		return -ENOMEM;
3266 
3267 	base->lookup_phy_chans = devm_kcalloc(dev, num_phy_chans,
3268 					      sizeof(*base->lookup_phy_chans),
3269 					      GFP_KERNEL);
3270 	if (!base->lookup_phy_chans)
3271 		return -ENOMEM;
3272 
3273 	base->lookup_log_chans = devm_kcalloc(dev, num_log_chans,
3274 					      sizeof(*base->lookup_log_chans),
3275 					      GFP_KERNEL);
3276 	if (!base->lookup_log_chans)
3277 		return -ENOMEM;
3278 
3279 	base->reg_val_backup_chan = devm_kmalloc_array(dev, base->num_phy_chans,
3280 						  sizeof(d40_backup_regs_chan),
3281 						  GFP_KERNEL);
3282 	if (!base->reg_val_backup_chan)
3283 		return -ENOMEM;
3284 
3285 	base->lcla_pool.alloc_map = devm_kcalloc(dev, num_phy_chans
3286 					    * D40_LCLA_LINK_PER_EVENT_GRP,
3287 					    sizeof(*base->lcla_pool.alloc_map),
3288 					    GFP_KERNEL);
3289 	if (!base->lcla_pool.alloc_map)
3290 		return -ENOMEM;
3291 
3292 	base->regs_interrupt = devm_kmalloc_array(dev, base->gen_dmac.il_size,
3293 					     sizeof(*base->regs_interrupt),
3294 					     GFP_KERNEL);
3295 	if (!base->regs_interrupt)
3296 		return -ENOMEM;
3297 
3298 	base->desc_slab = kmem_cache_create(D40_NAME, sizeof(struct d40_desc),
3299 					    0, SLAB_HWCACHE_ALIGN,
3300 					    NULL);
3301 	if (!base->desc_slab)
3302 		return -ENOMEM;
3303 
3304 	ret = devm_add_action_or_reset(dev, d40_drop_kmem_cache_action,
3305 				       base->desc_slab);
3306 	if (ret)
3307 		return ret;
3308 
3309 	*retbase = base;
3310 
3311 	return 0;
3312 }
3313 
3314 static void __init d40_hw_init(struct d40_base *base)
3315 {
3316 
3317 	int i;
3318 	u32 prmseo[2] = {0, 0};
3319 	u32 activeo[2] = {0xFFFFFFFF, 0xFFFFFFFF};
3320 	u32 pcmis = 0;
3321 	u32 pcicr = 0;
3322 	struct d40_reg_val *dma_init_reg = base->gen_dmac.init_reg;
3323 	u32 reg_size = base->gen_dmac.init_reg_size;
3324 
3325 	for (i = 0; i < reg_size; i++)
3326 		writel(dma_init_reg[i].val,
3327 		       base->virtbase + dma_init_reg[i].reg);
3328 
3329 	/* Configure all our dma channels to default settings */
3330 	for (i = 0; i < base->num_phy_chans; i++) {
3331 
3332 		activeo[i % 2] = activeo[i % 2] << 2;
3333 
3334 		if (base->phy_res[base->num_phy_chans - i - 1].allocated_src
3335 		    == D40_ALLOC_PHY) {
3336 			activeo[i % 2] |= 3;
3337 			continue;
3338 		}
3339 
3340 		/* Enable interrupt # */
3341 		pcmis = (pcmis << 1) | 1;
3342 
3343 		/* Clear interrupt # */
3344 		pcicr = (pcicr << 1) | 1;
3345 
3346 		/* Set channel to physical mode */
3347 		prmseo[i % 2] = prmseo[i % 2] << 2;
3348 		prmseo[i % 2] |= 1;
3349 
3350 	}
3351 
3352 	writel(prmseo[1], base->virtbase + D40_DREG_PRMSE);
3353 	writel(prmseo[0], base->virtbase + D40_DREG_PRMSO);
3354 	writel(activeo[1], base->virtbase + D40_DREG_ACTIVE);
3355 	writel(activeo[0], base->virtbase + D40_DREG_ACTIVO);
3356 
3357 	/* Write which interrupt to enable */
3358 	writel(pcmis, base->virtbase + base->gen_dmac.interrupt_en);
3359 
3360 	/* Write which interrupt to clear */
3361 	writel(pcicr, base->virtbase + base->gen_dmac.interrupt_clear);
3362 
3363 	/* These are __initdata and cannot be accessed after init */
3364 	base->gen_dmac.init_reg = NULL;
3365 	base->gen_dmac.init_reg_size = 0;
3366 }
3367 
3368 static int __init d40_lcla_allocate(struct d40_base *base)
3369 {
3370 	struct d40_lcla_pool *pool = &base->lcla_pool;
3371 	unsigned long *page_list;
3372 	int i, j;
3373 	int ret;
3374 
3375 	/*
3376 	 * This is somewhat ugly. We need 8192 bytes that are 18 bit aligned,
3377 	 * To full fill this hardware requirement without wasting 256 kb
3378 	 * we allocate pages until we get an aligned one.
3379 	 */
3380 	page_list = kmalloc_array(MAX_LCLA_ALLOC_ATTEMPTS,
3381 				  sizeof(*page_list),
3382 				  GFP_KERNEL);
3383 	if (!page_list)
3384 		return -ENOMEM;
3385 
3386 	/* Calculating how many pages that are required */
3387 	base->lcla_pool.pages = SZ_1K * base->num_phy_chans / PAGE_SIZE;
3388 
3389 	for (i = 0; i < MAX_LCLA_ALLOC_ATTEMPTS; i++) {
3390 		page_list[i] = __get_free_pages(GFP_KERNEL,
3391 						base->lcla_pool.pages);
3392 		if (!page_list[i]) {
3393 
3394 			d40_err(base->dev, "Failed to allocate %d pages.\n",
3395 				base->lcla_pool.pages);
3396 			ret = -ENOMEM;
3397 
3398 			for (j = 0; j < i; j++)
3399 				free_pages(page_list[j], base->lcla_pool.pages);
3400 			goto free_page_list;
3401 		}
3402 
3403 		if ((virt_to_phys((void *)page_list[i]) &
3404 		     (LCLA_ALIGNMENT - 1)) == 0)
3405 			break;
3406 	}
3407 
3408 	for (j = 0; j < i; j++)
3409 		free_pages(page_list[j], base->lcla_pool.pages);
3410 
3411 	if (i < MAX_LCLA_ALLOC_ATTEMPTS) {
3412 		base->lcla_pool.base = (void *)page_list[i];
3413 	} else {
3414 		/*
3415 		 * After many attempts and no succees with finding the correct
3416 		 * alignment, try with allocating a big buffer.
3417 		 */
3418 		dev_warn(base->dev,
3419 			 "[%s] Failed to get %d pages @ 18 bit align.\n",
3420 			 __func__, base->lcla_pool.pages);
3421 		base->lcla_pool.base_unaligned = kmalloc(SZ_1K *
3422 							 base->num_phy_chans +
3423 							 LCLA_ALIGNMENT,
3424 							 GFP_KERNEL);
3425 		if (!base->lcla_pool.base_unaligned) {
3426 			ret = -ENOMEM;
3427 			goto free_page_list;
3428 		}
3429 
3430 		base->lcla_pool.base = PTR_ALIGN(base->lcla_pool.base_unaligned,
3431 						 LCLA_ALIGNMENT);
3432 	}
3433 
3434 	pool->dma_addr = dma_map_single(base->dev, pool->base,
3435 					SZ_1K * base->num_phy_chans,
3436 					DMA_TO_DEVICE);
3437 	if (dma_mapping_error(base->dev, pool->dma_addr)) {
3438 		pool->dma_addr = 0;
3439 		ret = -ENOMEM;
3440 		goto free_page_list;
3441 	}
3442 
3443 	writel(virt_to_phys(base->lcla_pool.base),
3444 	       base->virtbase + D40_DREG_LCLA);
3445 	ret = 0;
3446  free_page_list:
3447 	kfree(page_list);
3448 	return ret;
3449 }
3450 
3451 static int __init d40_of_probe(struct device *dev,
3452 			       struct device_node *np)
3453 {
3454 	struct stedma40_platform_data *pdata;
3455 	int num_phy = 0, num_memcpy = 0, num_disabled = 0;
3456 	const __be32 *list;
3457 
3458 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
3459 	if (!pdata)
3460 		return -ENOMEM;
3461 
3462 	/* If absent this value will be obtained from h/w. */
3463 	of_property_read_u32(np, "dma-channels", &num_phy);
3464 	if (num_phy > 0)
3465 		pdata->num_of_phy_chans = num_phy;
3466 
3467 	list = of_get_property(np, "memcpy-channels", &num_memcpy);
3468 	num_memcpy /= sizeof(*list);
3469 
3470 	if (num_memcpy > D40_MEMCPY_MAX_CHANS || num_memcpy <= 0) {
3471 		d40_err(dev,
3472 			"Invalid number of memcpy channels specified (%d)\n",
3473 			num_memcpy);
3474 		return -EINVAL;
3475 	}
3476 	pdata->num_of_memcpy_chans = num_memcpy;
3477 
3478 	of_property_read_u32_array(np, "memcpy-channels",
3479 				   dma40_memcpy_channels,
3480 				   num_memcpy);
3481 
3482 	list = of_get_property(np, "disabled-channels", &num_disabled);
3483 	num_disabled /= sizeof(*list);
3484 
3485 	if (num_disabled >= STEDMA40_MAX_PHYS || num_disabled < 0) {
3486 		d40_err(dev,
3487 			"Invalid number of disabled channels specified (%d)\n",
3488 			num_disabled);
3489 		return -EINVAL;
3490 	}
3491 
3492 	of_property_read_u32_array(np, "disabled-channels",
3493 				   pdata->disabled_channels,
3494 				   num_disabled);
3495 	pdata->disabled_channels[num_disabled] = -1;
3496 
3497 	dev->platform_data = pdata;
3498 
3499 	return 0;
3500 }
3501 
3502 static int __init d40_probe(struct platform_device *pdev)
3503 {
3504 	struct device *dev = &pdev->dev;
3505 	struct device_node *np = pdev->dev.of_node;
3506 	struct device_node *np_lcpa;
3507 	struct d40_base *base;
3508 	struct resource *res;
3509 	struct resource res_lcpa;
3510 	int num_reserved_chans;
3511 	u32 val;
3512 	int ret;
3513 
3514 	if (d40_of_probe(dev, np)) {
3515 		ret = -ENOMEM;
3516 		goto report_failure;
3517 	}
3518 
3519 	ret = d40_hw_detect_init(pdev, &base);
3520 	if (ret)
3521 		goto report_failure;
3522 
3523 	num_reserved_chans = d40_phy_res_init(base);
3524 
3525 	platform_set_drvdata(pdev, base);
3526 
3527 	spin_lock_init(&base->interrupt_lock);
3528 	spin_lock_init(&base->execmd_lock);
3529 
3530 	/* Get IO for logical channel parameter address (LCPA) */
3531 	np_lcpa = of_parse_phandle(np, "sram", 0);
3532 	if (!np_lcpa) {
3533 		dev_err(dev, "no LCPA SRAM node\n");
3534 		ret = -EINVAL;
3535 		goto report_failure;
3536 	}
3537 	/* This is no device so read the address directly from the node */
3538 	ret = of_address_to_resource(np_lcpa, 0, &res_lcpa);
3539 	if (ret) {
3540 		dev_err(dev, "no LCPA SRAM resource\n");
3541 		goto report_failure;
3542 	}
3543 	base->lcpa_size = resource_size(&res_lcpa);
3544 	base->phy_lcpa = res_lcpa.start;
3545 	dev_info(dev, "found LCPA SRAM at %pad, size %pa\n",
3546 		 &base->phy_lcpa, &base->lcpa_size);
3547 
3548 	/* We make use of ESRAM memory for this. */
3549 	val = readl(base->virtbase + D40_DREG_LCPA);
3550 	if (base->phy_lcpa != val && val != 0) {
3551 		dev_warn(dev,
3552 			 "[%s] Mismatch LCPA dma 0x%x, def %08x\n",
3553 			 __func__, val, (u32)base->phy_lcpa);
3554 	} else
3555 		writel(base->phy_lcpa, base->virtbase + D40_DREG_LCPA);
3556 
3557 	base->lcpa_base = devm_ioremap(dev, base->phy_lcpa, base->lcpa_size);
3558 	if (!base->lcpa_base) {
3559 		ret = -ENOMEM;
3560 		d40_err(dev, "Failed to ioremap LCPA region\n");
3561 		goto report_failure;
3562 	}
3563 	/* If lcla has to be located in ESRAM we don't need to allocate */
3564 	if (base->plat_data->use_esram_lcla) {
3565 		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
3566 							"lcla_esram");
3567 		if (!res) {
3568 			ret = -ENOENT;
3569 			d40_err(dev,
3570 				"No \"lcla_esram\" memory resource\n");
3571 			goto report_failure;
3572 		}
3573 		base->lcla_pool.base = devm_ioremap(dev, res->start,
3574 						    resource_size(res));
3575 		if (!base->lcla_pool.base) {
3576 			ret = -ENOMEM;
3577 			d40_err(dev, "Failed to ioremap LCLA region\n");
3578 			goto report_failure;
3579 		}
3580 		writel(res->start, base->virtbase + D40_DREG_LCLA);
3581 
3582 	} else {
3583 		ret = d40_lcla_allocate(base);
3584 		if (ret) {
3585 			d40_err(dev, "Failed to allocate LCLA area\n");
3586 			goto destroy_cache;
3587 		}
3588 	}
3589 
3590 	spin_lock_init(&base->lcla_pool.lock);
3591 
3592 	base->irq = platform_get_irq(pdev, 0);
3593 
3594 	ret = request_irq(base->irq, d40_handle_interrupt, 0, D40_NAME, base);
3595 	if (ret) {
3596 		d40_err(dev, "No IRQ defined\n");
3597 		goto destroy_cache;
3598 	}
3599 
3600 	if (base->plat_data->use_esram_lcla) {
3601 
3602 		base->lcpa_regulator = regulator_get(base->dev, "lcla_esram");
3603 		if (IS_ERR(base->lcpa_regulator)) {
3604 			d40_err(dev, "Failed to get lcpa_regulator\n");
3605 			ret = PTR_ERR(base->lcpa_regulator);
3606 			base->lcpa_regulator = NULL;
3607 			goto destroy_cache;
3608 		}
3609 
3610 		ret = regulator_enable(base->lcpa_regulator);
3611 		if (ret) {
3612 			d40_err(dev,
3613 				"Failed to enable lcpa_regulator\n");
3614 			regulator_put(base->lcpa_regulator);
3615 			base->lcpa_regulator = NULL;
3616 			goto destroy_cache;
3617 		}
3618 	}
3619 
3620 	writel_relaxed(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC);
3621 
3622 	pm_runtime_irq_safe(base->dev);
3623 	pm_runtime_set_autosuspend_delay(base->dev, DMA40_AUTOSUSPEND_DELAY);
3624 	pm_runtime_use_autosuspend(base->dev);
3625 	pm_runtime_mark_last_busy(base->dev);
3626 	pm_runtime_set_active(base->dev);
3627 	pm_runtime_enable(base->dev);
3628 
3629 	ret = d40_dmaengine_init(base, num_reserved_chans);
3630 	if (ret)
3631 		goto destroy_cache;
3632 
3633 	ret = dma_set_max_seg_size(base->dev, STEDMA40_MAX_SEG_SIZE);
3634 	if (ret) {
3635 		d40_err(dev, "Failed to set dma max seg size\n");
3636 		goto destroy_cache;
3637 	}
3638 
3639 	d40_hw_init(base);
3640 
3641 	ret = of_dma_controller_register(np, d40_xlate, NULL);
3642 	if (ret) {
3643 		dev_err(dev,
3644 			"could not register of_dma_controller\n");
3645 		goto destroy_cache;
3646 	}
3647 
3648 	dev_info(base->dev, "initialized\n");
3649 	return 0;
3650 
3651  destroy_cache:
3652 	if (base->lcla_pool.dma_addr)
3653 		dma_unmap_single(base->dev, base->lcla_pool.dma_addr,
3654 				 SZ_1K * base->num_phy_chans,
3655 				 DMA_TO_DEVICE);
3656 
3657 	if (!base->lcla_pool.base_unaligned && base->lcla_pool.base)
3658 		free_pages((unsigned long)base->lcla_pool.base,
3659 			   base->lcla_pool.pages);
3660 
3661 	kfree(base->lcla_pool.base_unaligned);
3662 
3663 	if (base->lcpa_regulator) {
3664 		regulator_disable(base->lcpa_regulator);
3665 		regulator_put(base->lcpa_regulator);
3666 	}
3667 
3668  report_failure:
3669 	d40_err(dev, "probe failed\n");
3670 	return ret;
3671 }
3672 
3673 static const struct of_device_id d40_match[] = {
3674         { .compatible = "stericsson,dma40", },
3675         {}
3676 };
3677 
3678 static struct platform_driver d40_driver = {
3679 	.driver = {
3680 		.name  = D40_NAME,
3681 		.pm = &dma40_pm_ops,
3682 		.of_match_table = d40_match,
3683 	},
3684 };
3685 
3686 static int __init stedma40_init(void)
3687 {
3688 	return platform_driver_probe(&d40_driver, d40_probe);
3689 }
3690 subsys_initcall(stedma40_init);
3691