1 /* 2 * Copyright (C) Ericsson AB 2007-2008 3 * Copyright (C) ST-Ericsson SA 2008-2010 4 * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson 5 * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson 6 * License terms: GNU General Public License (GPL) version 2 7 */ 8 9 #include <linux/dma-mapping.h> 10 #include <linux/kernel.h> 11 #include <linux/slab.h> 12 #include <linux/export.h> 13 #include <linux/dmaengine.h> 14 #include <linux/platform_device.h> 15 #include <linux/clk.h> 16 #include <linux/delay.h> 17 #include <linux/log2.h> 18 #include <linux/pm.h> 19 #include <linux/pm_runtime.h> 20 #include <linux/err.h> 21 #include <linux/of.h> 22 #include <linux/of_dma.h> 23 #include <linux/amba/bus.h> 24 #include <linux/regulator/consumer.h> 25 #include <linux/platform_data/dma-ste-dma40.h> 26 27 #include "dmaengine.h" 28 #include "ste_dma40_ll.h" 29 30 #define D40_NAME "dma40" 31 32 #define D40_PHY_CHAN -1 33 34 /* For masking out/in 2 bit channel positions */ 35 #define D40_CHAN_POS(chan) (2 * (chan / 2)) 36 #define D40_CHAN_POS_MASK(chan) (0x3 << D40_CHAN_POS(chan)) 37 38 /* Maximum iterations taken before giving up suspending a channel */ 39 #define D40_SUSPEND_MAX_IT 500 40 41 /* Milliseconds */ 42 #define DMA40_AUTOSUSPEND_DELAY 100 43 44 /* Hardware requirement on LCLA alignment */ 45 #define LCLA_ALIGNMENT 0x40000 46 47 /* Max number of links per event group */ 48 #define D40_LCLA_LINK_PER_EVENT_GRP 128 49 #define D40_LCLA_END D40_LCLA_LINK_PER_EVENT_GRP 50 51 /* Max number of logical channels per physical channel */ 52 #define D40_MAX_LOG_CHAN_PER_PHY 32 53 54 /* Attempts before giving up to trying to get pages that are aligned */ 55 #define MAX_LCLA_ALLOC_ATTEMPTS 256 56 57 /* Bit markings for allocation map */ 58 #define D40_ALLOC_FREE BIT(31) 59 #define D40_ALLOC_PHY BIT(30) 60 #define D40_ALLOC_LOG_FREE 0 61 62 #define D40_MEMCPY_MAX_CHANS 8 63 64 /* Reserved event lines for memcpy only. */ 65 #define DB8500_DMA_MEMCPY_EV_0 51 66 #define DB8500_DMA_MEMCPY_EV_1 56 67 #define DB8500_DMA_MEMCPY_EV_2 57 68 #define DB8500_DMA_MEMCPY_EV_3 58 69 #define DB8500_DMA_MEMCPY_EV_4 59 70 #define DB8500_DMA_MEMCPY_EV_5 60 71 72 static int dma40_memcpy_channels[] = { 73 DB8500_DMA_MEMCPY_EV_0, 74 DB8500_DMA_MEMCPY_EV_1, 75 DB8500_DMA_MEMCPY_EV_2, 76 DB8500_DMA_MEMCPY_EV_3, 77 DB8500_DMA_MEMCPY_EV_4, 78 DB8500_DMA_MEMCPY_EV_5, 79 }; 80 81 /* Default configuration for physcial memcpy */ 82 static const struct stedma40_chan_cfg dma40_memcpy_conf_phy = { 83 .mode = STEDMA40_MODE_PHYSICAL, 84 .dir = DMA_MEM_TO_MEM, 85 86 .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, 87 .src_info.psize = STEDMA40_PSIZE_PHY_1, 88 .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, 89 90 .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, 91 .dst_info.psize = STEDMA40_PSIZE_PHY_1, 92 .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, 93 }; 94 95 /* Default configuration for logical memcpy */ 96 static const struct stedma40_chan_cfg dma40_memcpy_conf_log = { 97 .mode = STEDMA40_MODE_LOGICAL, 98 .dir = DMA_MEM_TO_MEM, 99 100 .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, 101 .src_info.psize = STEDMA40_PSIZE_LOG_1, 102 .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, 103 104 .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, 105 .dst_info.psize = STEDMA40_PSIZE_LOG_1, 106 .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, 107 }; 108 109 /** 110 * enum 40_command - The different commands and/or statuses. 111 * 112 * @D40_DMA_STOP: DMA channel command STOP or status STOPPED, 113 * @D40_DMA_RUN: The DMA channel is RUNNING of the command RUN. 114 * @D40_DMA_SUSPEND_REQ: Request the DMA to SUSPEND as soon as possible. 115 * @D40_DMA_SUSPENDED: The DMA channel is SUSPENDED. 116 */ 117 enum d40_command { 118 D40_DMA_STOP = 0, 119 D40_DMA_RUN = 1, 120 D40_DMA_SUSPEND_REQ = 2, 121 D40_DMA_SUSPENDED = 3 122 }; 123 124 /* 125 * enum d40_events - The different Event Enables for the event lines. 126 * 127 * @D40_DEACTIVATE_EVENTLINE: De-activate Event line, stopping the logical chan. 128 * @D40_ACTIVATE_EVENTLINE: Activate the Event line, to start a logical chan. 129 * @D40_SUSPEND_REQ_EVENTLINE: Requesting for suspending a event line. 130 * @D40_ROUND_EVENTLINE: Status check for event line. 131 */ 132 133 enum d40_events { 134 D40_DEACTIVATE_EVENTLINE = 0, 135 D40_ACTIVATE_EVENTLINE = 1, 136 D40_SUSPEND_REQ_EVENTLINE = 2, 137 D40_ROUND_EVENTLINE = 3 138 }; 139 140 /* 141 * These are the registers that has to be saved and later restored 142 * when the DMA hw is powered off. 143 * TODO: Add save/restore of D40_DREG_GCC on dma40 v3 or later, if that works. 144 */ 145 static u32 d40_backup_regs[] = { 146 D40_DREG_LCPA, 147 D40_DREG_LCLA, 148 D40_DREG_PRMSE, 149 D40_DREG_PRMSO, 150 D40_DREG_PRMOE, 151 D40_DREG_PRMOO, 152 }; 153 154 #define BACKUP_REGS_SZ ARRAY_SIZE(d40_backup_regs) 155 156 /* 157 * since 9540 and 8540 has the same HW revision 158 * use v4a for 9540 or ealier 159 * use v4b for 8540 or later 160 * HW revision: 161 * DB8500ed has revision 0 162 * DB8500v1 has revision 2 163 * DB8500v2 has revision 3 164 * AP9540v1 has revision 4 165 * DB8540v1 has revision 4 166 * TODO: Check if all these registers have to be saved/restored on dma40 v4a 167 */ 168 static u32 d40_backup_regs_v4a[] = { 169 D40_DREG_PSEG1, 170 D40_DREG_PSEG2, 171 D40_DREG_PSEG3, 172 D40_DREG_PSEG4, 173 D40_DREG_PCEG1, 174 D40_DREG_PCEG2, 175 D40_DREG_PCEG3, 176 D40_DREG_PCEG4, 177 D40_DREG_RSEG1, 178 D40_DREG_RSEG2, 179 D40_DREG_RSEG3, 180 D40_DREG_RSEG4, 181 D40_DREG_RCEG1, 182 D40_DREG_RCEG2, 183 D40_DREG_RCEG3, 184 D40_DREG_RCEG4, 185 }; 186 187 #define BACKUP_REGS_SZ_V4A ARRAY_SIZE(d40_backup_regs_v4a) 188 189 static u32 d40_backup_regs_v4b[] = { 190 D40_DREG_CPSEG1, 191 D40_DREG_CPSEG2, 192 D40_DREG_CPSEG3, 193 D40_DREG_CPSEG4, 194 D40_DREG_CPSEG5, 195 D40_DREG_CPCEG1, 196 D40_DREG_CPCEG2, 197 D40_DREG_CPCEG3, 198 D40_DREG_CPCEG4, 199 D40_DREG_CPCEG5, 200 D40_DREG_CRSEG1, 201 D40_DREG_CRSEG2, 202 D40_DREG_CRSEG3, 203 D40_DREG_CRSEG4, 204 D40_DREG_CRSEG5, 205 D40_DREG_CRCEG1, 206 D40_DREG_CRCEG2, 207 D40_DREG_CRCEG3, 208 D40_DREG_CRCEG4, 209 D40_DREG_CRCEG5, 210 }; 211 212 #define BACKUP_REGS_SZ_V4B ARRAY_SIZE(d40_backup_regs_v4b) 213 214 static u32 d40_backup_regs_chan[] = { 215 D40_CHAN_REG_SSCFG, 216 D40_CHAN_REG_SSELT, 217 D40_CHAN_REG_SSPTR, 218 D40_CHAN_REG_SSLNK, 219 D40_CHAN_REG_SDCFG, 220 D40_CHAN_REG_SDELT, 221 D40_CHAN_REG_SDPTR, 222 D40_CHAN_REG_SDLNK, 223 }; 224 225 #define BACKUP_REGS_SZ_MAX ((BACKUP_REGS_SZ_V4A > BACKUP_REGS_SZ_V4B) ? \ 226 BACKUP_REGS_SZ_V4A : BACKUP_REGS_SZ_V4B) 227 228 /** 229 * struct d40_interrupt_lookup - lookup table for interrupt handler 230 * 231 * @src: Interrupt mask register. 232 * @clr: Interrupt clear register. 233 * @is_error: true if this is an error interrupt. 234 * @offset: start delta in the lookup_log_chans in d40_base. If equals to 235 * D40_PHY_CHAN, the lookup_phy_chans shall be used instead. 236 */ 237 struct d40_interrupt_lookup { 238 u32 src; 239 u32 clr; 240 bool is_error; 241 int offset; 242 }; 243 244 245 static struct d40_interrupt_lookup il_v4a[] = { 246 {D40_DREG_LCTIS0, D40_DREG_LCICR0, false, 0}, 247 {D40_DREG_LCTIS1, D40_DREG_LCICR1, false, 32}, 248 {D40_DREG_LCTIS2, D40_DREG_LCICR2, false, 64}, 249 {D40_DREG_LCTIS3, D40_DREG_LCICR3, false, 96}, 250 {D40_DREG_LCEIS0, D40_DREG_LCICR0, true, 0}, 251 {D40_DREG_LCEIS1, D40_DREG_LCICR1, true, 32}, 252 {D40_DREG_LCEIS2, D40_DREG_LCICR2, true, 64}, 253 {D40_DREG_LCEIS3, D40_DREG_LCICR3, true, 96}, 254 {D40_DREG_PCTIS, D40_DREG_PCICR, false, D40_PHY_CHAN}, 255 {D40_DREG_PCEIS, D40_DREG_PCICR, true, D40_PHY_CHAN}, 256 }; 257 258 static struct d40_interrupt_lookup il_v4b[] = { 259 {D40_DREG_CLCTIS1, D40_DREG_CLCICR1, false, 0}, 260 {D40_DREG_CLCTIS2, D40_DREG_CLCICR2, false, 32}, 261 {D40_DREG_CLCTIS3, D40_DREG_CLCICR3, false, 64}, 262 {D40_DREG_CLCTIS4, D40_DREG_CLCICR4, false, 96}, 263 {D40_DREG_CLCTIS5, D40_DREG_CLCICR5, false, 128}, 264 {D40_DREG_CLCEIS1, D40_DREG_CLCICR1, true, 0}, 265 {D40_DREG_CLCEIS2, D40_DREG_CLCICR2, true, 32}, 266 {D40_DREG_CLCEIS3, D40_DREG_CLCICR3, true, 64}, 267 {D40_DREG_CLCEIS4, D40_DREG_CLCICR4, true, 96}, 268 {D40_DREG_CLCEIS5, D40_DREG_CLCICR5, true, 128}, 269 {D40_DREG_CPCTIS, D40_DREG_CPCICR, false, D40_PHY_CHAN}, 270 {D40_DREG_CPCEIS, D40_DREG_CPCICR, true, D40_PHY_CHAN}, 271 }; 272 273 /** 274 * struct d40_reg_val - simple lookup struct 275 * 276 * @reg: The register. 277 * @val: The value that belongs to the register in reg. 278 */ 279 struct d40_reg_val { 280 unsigned int reg; 281 unsigned int val; 282 }; 283 284 static __initdata struct d40_reg_val dma_init_reg_v4a[] = { 285 /* Clock every part of the DMA block from start */ 286 { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL}, 287 288 /* Interrupts on all logical channels */ 289 { .reg = D40_DREG_LCMIS0, .val = 0xFFFFFFFF}, 290 { .reg = D40_DREG_LCMIS1, .val = 0xFFFFFFFF}, 291 { .reg = D40_DREG_LCMIS2, .val = 0xFFFFFFFF}, 292 { .reg = D40_DREG_LCMIS3, .val = 0xFFFFFFFF}, 293 { .reg = D40_DREG_LCICR0, .val = 0xFFFFFFFF}, 294 { .reg = D40_DREG_LCICR1, .val = 0xFFFFFFFF}, 295 { .reg = D40_DREG_LCICR2, .val = 0xFFFFFFFF}, 296 { .reg = D40_DREG_LCICR3, .val = 0xFFFFFFFF}, 297 { .reg = D40_DREG_LCTIS0, .val = 0xFFFFFFFF}, 298 { .reg = D40_DREG_LCTIS1, .val = 0xFFFFFFFF}, 299 { .reg = D40_DREG_LCTIS2, .val = 0xFFFFFFFF}, 300 { .reg = D40_DREG_LCTIS3, .val = 0xFFFFFFFF} 301 }; 302 static __initdata struct d40_reg_val dma_init_reg_v4b[] = { 303 /* Clock every part of the DMA block from start */ 304 { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL}, 305 306 /* Interrupts on all logical channels */ 307 { .reg = D40_DREG_CLCMIS1, .val = 0xFFFFFFFF}, 308 { .reg = D40_DREG_CLCMIS2, .val = 0xFFFFFFFF}, 309 { .reg = D40_DREG_CLCMIS3, .val = 0xFFFFFFFF}, 310 { .reg = D40_DREG_CLCMIS4, .val = 0xFFFFFFFF}, 311 { .reg = D40_DREG_CLCMIS5, .val = 0xFFFFFFFF}, 312 { .reg = D40_DREG_CLCICR1, .val = 0xFFFFFFFF}, 313 { .reg = D40_DREG_CLCICR2, .val = 0xFFFFFFFF}, 314 { .reg = D40_DREG_CLCICR3, .val = 0xFFFFFFFF}, 315 { .reg = D40_DREG_CLCICR4, .val = 0xFFFFFFFF}, 316 { .reg = D40_DREG_CLCICR5, .val = 0xFFFFFFFF}, 317 { .reg = D40_DREG_CLCTIS1, .val = 0xFFFFFFFF}, 318 { .reg = D40_DREG_CLCTIS2, .val = 0xFFFFFFFF}, 319 { .reg = D40_DREG_CLCTIS3, .val = 0xFFFFFFFF}, 320 { .reg = D40_DREG_CLCTIS4, .val = 0xFFFFFFFF}, 321 { .reg = D40_DREG_CLCTIS5, .val = 0xFFFFFFFF} 322 }; 323 324 /** 325 * struct d40_lli_pool - Structure for keeping LLIs in memory 326 * 327 * @base: Pointer to memory area when the pre_alloc_lli's are not large 328 * enough, IE bigger than the most common case, 1 dst and 1 src. NULL if 329 * pre_alloc_lli is used. 330 * @dma_addr: DMA address, if mapped 331 * @size: The size in bytes of the memory at base or the size of pre_alloc_lli. 332 * @pre_alloc_lli: Pre allocated area for the most common case of transfers, 333 * one buffer to one buffer. 334 */ 335 struct d40_lli_pool { 336 void *base; 337 int size; 338 dma_addr_t dma_addr; 339 /* Space for dst and src, plus an extra for padding */ 340 u8 pre_alloc_lli[3 * sizeof(struct d40_phy_lli)]; 341 }; 342 343 /** 344 * struct d40_desc - A descriptor is one DMA job. 345 * 346 * @lli_phy: LLI settings for physical channel. Both src and dst= 347 * points into the lli_pool, to base if lli_len > 1 or to pre_alloc_lli if 348 * lli_len equals one. 349 * @lli_log: Same as above but for logical channels. 350 * @lli_pool: The pool with two entries pre-allocated. 351 * @lli_len: Number of llis of current descriptor. 352 * @lli_current: Number of transferred llis. 353 * @lcla_alloc: Number of LCLA entries allocated. 354 * @txd: DMA engine struct. Used for among other things for communication 355 * during a transfer. 356 * @node: List entry. 357 * @is_in_client_list: true if the client owns this descriptor. 358 * @cyclic: true if this is a cyclic job 359 * 360 * This descriptor is used for both logical and physical transfers. 361 */ 362 struct d40_desc { 363 /* LLI physical */ 364 struct d40_phy_lli_bidir lli_phy; 365 /* LLI logical */ 366 struct d40_log_lli_bidir lli_log; 367 368 struct d40_lli_pool lli_pool; 369 int lli_len; 370 int lli_current; 371 int lcla_alloc; 372 373 struct dma_async_tx_descriptor txd; 374 struct list_head node; 375 376 bool is_in_client_list; 377 bool cyclic; 378 }; 379 380 /** 381 * struct d40_lcla_pool - LCLA pool settings and data. 382 * 383 * @base: The virtual address of LCLA. 18 bit aligned. 384 * @base_unaligned: The orignal kmalloc pointer, if kmalloc is used. 385 * This pointer is only there for clean-up on error. 386 * @pages: The number of pages needed for all physical channels. 387 * Only used later for clean-up on error 388 * @lock: Lock to protect the content in this struct. 389 * @alloc_map: big map over which LCLA entry is own by which job. 390 */ 391 struct d40_lcla_pool { 392 void *base; 393 dma_addr_t dma_addr; 394 void *base_unaligned; 395 int pages; 396 spinlock_t lock; 397 struct d40_desc **alloc_map; 398 }; 399 400 /** 401 * struct d40_phy_res - struct for handling eventlines mapped to physical 402 * channels. 403 * 404 * @lock: A lock protection this entity. 405 * @reserved: True if used by secure world or otherwise. 406 * @num: The physical channel number of this entity. 407 * @allocated_src: Bit mapped to show which src event line's are mapped to 408 * this physical channel. Can also be free or physically allocated. 409 * @allocated_dst: Same as for src but is dst. 410 * allocated_dst and allocated_src uses the D40_ALLOC* defines as well as 411 * event line number. 412 * @use_soft_lli: To mark if the linked lists of channel are managed by SW. 413 */ 414 struct d40_phy_res { 415 spinlock_t lock; 416 bool reserved; 417 int num; 418 u32 allocated_src; 419 u32 allocated_dst; 420 bool use_soft_lli; 421 }; 422 423 struct d40_base; 424 425 /** 426 * struct d40_chan - Struct that describes a channel. 427 * 428 * @lock: A spinlock to protect this struct. 429 * @log_num: The logical number, if any of this channel. 430 * @pending_tx: The number of pending transfers. Used between interrupt handler 431 * and tasklet. 432 * @busy: Set to true when transfer is ongoing on this channel. 433 * @phy_chan: Pointer to physical channel which this instance runs on. If this 434 * point is NULL, then the channel is not allocated. 435 * @chan: DMA engine handle. 436 * @tasklet: Tasklet that gets scheduled from interrupt context to complete a 437 * transfer and call client callback. 438 * @client: Cliented owned descriptor list. 439 * @pending_queue: Submitted jobs, to be issued by issue_pending() 440 * @active: Active descriptor. 441 * @done: Completed jobs 442 * @queue: Queued jobs. 443 * @prepare_queue: Prepared jobs. 444 * @dma_cfg: The client configuration of this dma channel. 445 * @configured: whether the dma_cfg configuration is valid 446 * @base: Pointer to the device instance struct. 447 * @src_def_cfg: Default cfg register setting for src. 448 * @dst_def_cfg: Default cfg register setting for dst. 449 * @log_def: Default logical channel settings. 450 * @lcpa: Pointer to dst and src lcpa settings. 451 * @runtime_addr: runtime configured address. 452 * @runtime_direction: runtime configured direction. 453 * 454 * This struct can either "be" a logical or a physical channel. 455 */ 456 struct d40_chan { 457 spinlock_t lock; 458 int log_num; 459 int pending_tx; 460 bool busy; 461 struct d40_phy_res *phy_chan; 462 struct dma_chan chan; 463 struct tasklet_struct tasklet; 464 struct list_head client; 465 struct list_head pending_queue; 466 struct list_head active; 467 struct list_head done; 468 struct list_head queue; 469 struct list_head prepare_queue; 470 struct stedma40_chan_cfg dma_cfg; 471 bool configured; 472 struct d40_base *base; 473 /* Default register configurations */ 474 u32 src_def_cfg; 475 u32 dst_def_cfg; 476 struct d40_def_lcsp log_def; 477 struct d40_log_lli_full *lcpa; 478 /* Runtime reconfiguration */ 479 dma_addr_t runtime_addr; 480 enum dma_transfer_direction runtime_direction; 481 }; 482 483 /** 484 * struct d40_gen_dmac - generic values to represent u8500/u8540 DMA 485 * controller 486 * 487 * @backup: the pointer to the registers address array for backup 488 * @backup_size: the size of the registers address array for backup 489 * @realtime_en: the realtime enable register 490 * @realtime_clear: the realtime clear register 491 * @high_prio_en: the high priority enable register 492 * @high_prio_clear: the high priority clear register 493 * @interrupt_en: the interrupt enable register 494 * @interrupt_clear: the interrupt clear register 495 * @il: the pointer to struct d40_interrupt_lookup 496 * @il_size: the size of d40_interrupt_lookup array 497 * @init_reg: the pointer to the struct d40_reg_val 498 * @init_reg_size: the size of d40_reg_val array 499 */ 500 struct d40_gen_dmac { 501 u32 *backup; 502 u32 backup_size; 503 u32 realtime_en; 504 u32 realtime_clear; 505 u32 high_prio_en; 506 u32 high_prio_clear; 507 u32 interrupt_en; 508 u32 interrupt_clear; 509 struct d40_interrupt_lookup *il; 510 u32 il_size; 511 struct d40_reg_val *init_reg; 512 u32 init_reg_size; 513 }; 514 515 /** 516 * struct d40_base - The big global struct, one for each probe'd instance. 517 * 518 * @interrupt_lock: Lock used to make sure one interrupt is handle a time. 519 * @execmd_lock: Lock for execute command usage since several channels share 520 * the same physical register. 521 * @dev: The device structure. 522 * @virtbase: The virtual base address of the DMA's register. 523 * @rev: silicon revision detected. 524 * @clk: Pointer to the DMA clock structure. 525 * @phy_start: Physical memory start of the DMA registers. 526 * @phy_size: Size of the DMA register map. 527 * @irq: The IRQ number. 528 * @num_memcpy_chans: The number of channels used for memcpy (mem-to-mem 529 * transfers). 530 * @num_phy_chans: The number of physical channels. Read from HW. This 531 * is the number of available channels for this driver, not counting "Secure 532 * mode" allocated physical channels. 533 * @num_log_chans: The number of logical channels. Calculated from 534 * num_phy_chans. 535 * @dma_both: dma_device channels that can do both memcpy and slave transfers. 536 * @dma_slave: dma_device channels that can do only do slave transfers. 537 * @dma_memcpy: dma_device channels that can do only do memcpy transfers. 538 * @phy_chans: Room for all possible physical channels in system. 539 * @log_chans: Room for all possible logical channels in system. 540 * @lookup_log_chans: Used to map interrupt number to logical channel. Points 541 * to log_chans entries. 542 * @lookup_phy_chans: Used to map interrupt number to physical channel. Points 543 * to phy_chans entries. 544 * @plat_data: Pointer to provided platform_data which is the driver 545 * configuration. 546 * @lcpa_regulator: Pointer to hold the regulator for the esram bank for lcla. 547 * @phy_res: Vector containing all physical channels. 548 * @lcla_pool: lcla pool settings and data. 549 * @lcpa_base: The virtual mapped address of LCPA. 550 * @phy_lcpa: The physical address of the LCPA. 551 * @lcpa_size: The size of the LCPA area. 552 * @desc_slab: cache for descriptors. 553 * @reg_val_backup: Here the values of some hardware registers are stored 554 * before the DMA is powered off. They are restored when the power is back on. 555 * @reg_val_backup_v4: Backup of registers that only exits on dma40 v3 and 556 * later 557 * @reg_val_backup_chan: Backup data for standard channel parameter registers. 558 * @gcc_pwr_off_mask: Mask to maintain the channels that can be turned off. 559 * @gen_dmac: the struct for generic registers values to represent u8500/8540 560 * DMA controller 561 */ 562 struct d40_base { 563 spinlock_t interrupt_lock; 564 spinlock_t execmd_lock; 565 struct device *dev; 566 void __iomem *virtbase; 567 u8 rev:4; 568 struct clk *clk; 569 phys_addr_t phy_start; 570 resource_size_t phy_size; 571 int irq; 572 int num_memcpy_chans; 573 int num_phy_chans; 574 int num_log_chans; 575 struct device_dma_parameters dma_parms; 576 struct dma_device dma_both; 577 struct dma_device dma_slave; 578 struct dma_device dma_memcpy; 579 struct d40_chan *phy_chans; 580 struct d40_chan *log_chans; 581 struct d40_chan **lookup_log_chans; 582 struct d40_chan **lookup_phy_chans; 583 struct stedma40_platform_data *plat_data; 584 struct regulator *lcpa_regulator; 585 /* Physical half channels */ 586 struct d40_phy_res *phy_res; 587 struct d40_lcla_pool lcla_pool; 588 void *lcpa_base; 589 dma_addr_t phy_lcpa; 590 resource_size_t lcpa_size; 591 struct kmem_cache *desc_slab; 592 u32 reg_val_backup[BACKUP_REGS_SZ]; 593 u32 reg_val_backup_v4[BACKUP_REGS_SZ_MAX]; 594 u32 *reg_val_backup_chan; 595 u16 gcc_pwr_off_mask; 596 struct d40_gen_dmac gen_dmac; 597 }; 598 599 static struct device *chan2dev(struct d40_chan *d40c) 600 { 601 return &d40c->chan.dev->device; 602 } 603 604 static bool chan_is_physical(struct d40_chan *chan) 605 { 606 return chan->log_num == D40_PHY_CHAN; 607 } 608 609 static bool chan_is_logical(struct d40_chan *chan) 610 { 611 return !chan_is_physical(chan); 612 } 613 614 static void __iomem *chan_base(struct d40_chan *chan) 615 { 616 return chan->base->virtbase + D40_DREG_PCBASE + 617 chan->phy_chan->num * D40_DREG_PCDELTA; 618 } 619 620 #define d40_err(dev, format, arg...) \ 621 dev_err(dev, "[%s] " format, __func__, ## arg) 622 623 #define chan_err(d40c, format, arg...) \ 624 d40_err(chan2dev(d40c), format, ## arg) 625 626 static int d40_pool_lli_alloc(struct d40_chan *d40c, struct d40_desc *d40d, 627 int lli_len) 628 { 629 bool is_log = chan_is_logical(d40c); 630 u32 align; 631 void *base; 632 633 if (is_log) 634 align = sizeof(struct d40_log_lli); 635 else 636 align = sizeof(struct d40_phy_lli); 637 638 if (lli_len == 1) { 639 base = d40d->lli_pool.pre_alloc_lli; 640 d40d->lli_pool.size = sizeof(d40d->lli_pool.pre_alloc_lli); 641 d40d->lli_pool.base = NULL; 642 } else { 643 d40d->lli_pool.size = lli_len * 2 * align; 644 645 base = kmalloc(d40d->lli_pool.size + align, GFP_NOWAIT); 646 d40d->lli_pool.base = base; 647 648 if (d40d->lli_pool.base == NULL) 649 return -ENOMEM; 650 } 651 652 if (is_log) { 653 d40d->lli_log.src = PTR_ALIGN(base, align); 654 d40d->lli_log.dst = d40d->lli_log.src + lli_len; 655 656 d40d->lli_pool.dma_addr = 0; 657 } else { 658 d40d->lli_phy.src = PTR_ALIGN(base, align); 659 d40d->lli_phy.dst = d40d->lli_phy.src + lli_len; 660 661 d40d->lli_pool.dma_addr = dma_map_single(d40c->base->dev, 662 d40d->lli_phy.src, 663 d40d->lli_pool.size, 664 DMA_TO_DEVICE); 665 666 if (dma_mapping_error(d40c->base->dev, 667 d40d->lli_pool.dma_addr)) { 668 kfree(d40d->lli_pool.base); 669 d40d->lli_pool.base = NULL; 670 d40d->lli_pool.dma_addr = 0; 671 return -ENOMEM; 672 } 673 } 674 675 return 0; 676 } 677 678 static void d40_pool_lli_free(struct d40_chan *d40c, struct d40_desc *d40d) 679 { 680 if (d40d->lli_pool.dma_addr) 681 dma_unmap_single(d40c->base->dev, d40d->lli_pool.dma_addr, 682 d40d->lli_pool.size, DMA_TO_DEVICE); 683 684 kfree(d40d->lli_pool.base); 685 d40d->lli_pool.base = NULL; 686 d40d->lli_pool.size = 0; 687 d40d->lli_log.src = NULL; 688 d40d->lli_log.dst = NULL; 689 d40d->lli_phy.src = NULL; 690 d40d->lli_phy.dst = NULL; 691 } 692 693 static int d40_lcla_alloc_one(struct d40_chan *d40c, 694 struct d40_desc *d40d) 695 { 696 unsigned long flags; 697 int i; 698 int ret = -EINVAL; 699 700 spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags); 701 702 /* 703 * Allocate both src and dst at the same time, therefore the half 704 * start on 1 since 0 can't be used since zero is used as end marker. 705 */ 706 for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) { 707 int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i; 708 709 if (!d40c->base->lcla_pool.alloc_map[idx]) { 710 d40c->base->lcla_pool.alloc_map[idx] = d40d; 711 d40d->lcla_alloc++; 712 ret = i; 713 break; 714 } 715 } 716 717 spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags); 718 719 return ret; 720 } 721 722 static int d40_lcla_free_all(struct d40_chan *d40c, 723 struct d40_desc *d40d) 724 { 725 unsigned long flags; 726 int i; 727 int ret = -EINVAL; 728 729 if (chan_is_physical(d40c)) 730 return 0; 731 732 spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags); 733 734 for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) { 735 int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i; 736 737 if (d40c->base->lcla_pool.alloc_map[idx] == d40d) { 738 d40c->base->lcla_pool.alloc_map[idx] = NULL; 739 d40d->lcla_alloc--; 740 if (d40d->lcla_alloc == 0) { 741 ret = 0; 742 break; 743 } 744 } 745 } 746 747 spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags); 748 749 return ret; 750 751 } 752 753 static void d40_desc_remove(struct d40_desc *d40d) 754 { 755 list_del(&d40d->node); 756 } 757 758 static struct d40_desc *d40_desc_get(struct d40_chan *d40c) 759 { 760 struct d40_desc *desc = NULL; 761 762 if (!list_empty(&d40c->client)) { 763 struct d40_desc *d; 764 struct d40_desc *_d; 765 766 list_for_each_entry_safe(d, _d, &d40c->client, node) { 767 if (async_tx_test_ack(&d->txd)) { 768 d40_desc_remove(d); 769 desc = d; 770 memset(desc, 0, sizeof(*desc)); 771 break; 772 } 773 } 774 } 775 776 if (!desc) 777 desc = kmem_cache_zalloc(d40c->base->desc_slab, GFP_NOWAIT); 778 779 if (desc) 780 INIT_LIST_HEAD(&desc->node); 781 782 return desc; 783 } 784 785 static void d40_desc_free(struct d40_chan *d40c, struct d40_desc *d40d) 786 { 787 788 d40_pool_lli_free(d40c, d40d); 789 d40_lcla_free_all(d40c, d40d); 790 kmem_cache_free(d40c->base->desc_slab, d40d); 791 } 792 793 static void d40_desc_submit(struct d40_chan *d40c, struct d40_desc *desc) 794 { 795 list_add_tail(&desc->node, &d40c->active); 796 } 797 798 static void d40_phy_lli_load(struct d40_chan *chan, struct d40_desc *desc) 799 { 800 struct d40_phy_lli *lli_dst = desc->lli_phy.dst; 801 struct d40_phy_lli *lli_src = desc->lli_phy.src; 802 void __iomem *base = chan_base(chan); 803 804 writel(lli_src->reg_cfg, base + D40_CHAN_REG_SSCFG); 805 writel(lli_src->reg_elt, base + D40_CHAN_REG_SSELT); 806 writel(lli_src->reg_ptr, base + D40_CHAN_REG_SSPTR); 807 writel(lli_src->reg_lnk, base + D40_CHAN_REG_SSLNK); 808 809 writel(lli_dst->reg_cfg, base + D40_CHAN_REG_SDCFG); 810 writel(lli_dst->reg_elt, base + D40_CHAN_REG_SDELT); 811 writel(lli_dst->reg_ptr, base + D40_CHAN_REG_SDPTR); 812 writel(lli_dst->reg_lnk, base + D40_CHAN_REG_SDLNK); 813 } 814 815 static void d40_desc_done(struct d40_chan *d40c, struct d40_desc *desc) 816 { 817 list_add_tail(&desc->node, &d40c->done); 818 } 819 820 static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc) 821 { 822 struct d40_lcla_pool *pool = &chan->base->lcla_pool; 823 struct d40_log_lli_bidir *lli = &desc->lli_log; 824 int lli_current = desc->lli_current; 825 int lli_len = desc->lli_len; 826 bool cyclic = desc->cyclic; 827 int curr_lcla = -EINVAL; 828 int first_lcla = 0; 829 bool use_esram_lcla = chan->base->plat_data->use_esram_lcla; 830 bool linkback; 831 832 /* 833 * We may have partially running cyclic transfers, in case we did't get 834 * enough LCLA entries. 835 */ 836 linkback = cyclic && lli_current == 0; 837 838 /* 839 * For linkback, we need one LCLA even with only one link, because we 840 * can't link back to the one in LCPA space 841 */ 842 if (linkback || (lli_len - lli_current > 1)) { 843 /* 844 * If the channel is expected to use only soft_lli don't 845 * allocate a lcla. This is to avoid a HW issue that exists 846 * in some controller during a peripheral to memory transfer 847 * that uses linked lists. 848 */ 849 if (!(chan->phy_chan->use_soft_lli && 850 chan->dma_cfg.dir == DMA_DEV_TO_MEM)) 851 curr_lcla = d40_lcla_alloc_one(chan, desc); 852 853 first_lcla = curr_lcla; 854 } 855 856 /* 857 * For linkback, we normally load the LCPA in the loop since we need to 858 * link it to the second LCLA and not the first. However, if we 859 * couldn't even get a first LCLA, then we have to run in LCPA and 860 * reload manually. 861 */ 862 if (!linkback || curr_lcla == -EINVAL) { 863 unsigned int flags = 0; 864 865 if (curr_lcla == -EINVAL) 866 flags |= LLI_TERM_INT; 867 868 d40_log_lli_lcpa_write(chan->lcpa, 869 &lli->dst[lli_current], 870 &lli->src[lli_current], 871 curr_lcla, 872 flags); 873 lli_current++; 874 } 875 876 if (curr_lcla < 0) 877 goto set_current; 878 879 for (; lli_current < lli_len; lli_current++) { 880 unsigned int lcla_offset = chan->phy_chan->num * 1024 + 881 8 * curr_lcla * 2; 882 struct d40_log_lli *lcla = pool->base + lcla_offset; 883 unsigned int flags = 0; 884 int next_lcla; 885 886 if (lli_current + 1 < lli_len) 887 next_lcla = d40_lcla_alloc_one(chan, desc); 888 else 889 next_lcla = linkback ? first_lcla : -EINVAL; 890 891 if (cyclic || next_lcla == -EINVAL) 892 flags |= LLI_TERM_INT; 893 894 if (linkback && curr_lcla == first_lcla) { 895 /* First link goes in both LCPA and LCLA */ 896 d40_log_lli_lcpa_write(chan->lcpa, 897 &lli->dst[lli_current], 898 &lli->src[lli_current], 899 next_lcla, flags); 900 } 901 902 /* 903 * One unused LCLA in the cyclic case if the very first 904 * next_lcla fails... 905 */ 906 d40_log_lli_lcla_write(lcla, 907 &lli->dst[lli_current], 908 &lli->src[lli_current], 909 next_lcla, flags); 910 911 /* 912 * Cache maintenance is not needed if lcla is 913 * mapped in esram 914 */ 915 if (!use_esram_lcla) { 916 dma_sync_single_range_for_device(chan->base->dev, 917 pool->dma_addr, lcla_offset, 918 2 * sizeof(struct d40_log_lli), 919 DMA_TO_DEVICE); 920 } 921 curr_lcla = next_lcla; 922 923 if (curr_lcla == -EINVAL || curr_lcla == first_lcla) { 924 lli_current++; 925 break; 926 } 927 } 928 set_current: 929 desc->lli_current = lli_current; 930 } 931 932 static void d40_desc_load(struct d40_chan *d40c, struct d40_desc *d40d) 933 { 934 if (chan_is_physical(d40c)) { 935 d40_phy_lli_load(d40c, d40d); 936 d40d->lli_current = d40d->lli_len; 937 } else 938 d40_log_lli_to_lcxa(d40c, d40d); 939 } 940 941 static struct d40_desc *d40_first_active_get(struct d40_chan *d40c) 942 { 943 return list_first_entry_or_null(&d40c->active, struct d40_desc, node); 944 } 945 946 /* remove desc from current queue and add it to the pending_queue */ 947 static void d40_desc_queue(struct d40_chan *d40c, struct d40_desc *desc) 948 { 949 d40_desc_remove(desc); 950 desc->is_in_client_list = false; 951 list_add_tail(&desc->node, &d40c->pending_queue); 952 } 953 954 static struct d40_desc *d40_first_pending(struct d40_chan *d40c) 955 { 956 return list_first_entry_or_null(&d40c->pending_queue, struct d40_desc, 957 node); 958 } 959 960 static struct d40_desc *d40_first_queued(struct d40_chan *d40c) 961 { 962 return list_first_entry_or_null(&d40c->queue, struct d40_desc, node); 963 } 964 965 static struct d40_desc *d40_first_done(struct d40_chan *d40c) 966 { 967 return list_first_entry_or_null(&d40c->done, struct d40_desc, node); 968 } 969 970 static int d40_psize_2_burst_size(bool is_log, int psize) 971 { 972 if (is_log) { 973 if (psize == STEDMA40_PSIZE_LOG_1) 974 return 1; 975 } else { 976 if (psize == STEDMA40_PSIZE_PHY_1) 977 return 1; 978 } 979 980 return 2 << psize; 981 } 982 983 /* 984 * The dma only supports transmitting packages up to 985 * STEDMA40_MAX_SEG_SIZE * data_width, where data_width is stored in Bytes. 986 * 987 * Calculate the total number of dma elements required to send the entire sg list. 988 */ 989 static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2) 990 { 991 int dmalen; 992 u32 max_w = max(data_width1, data_width2); 993 u32 min_w = min(data_width1, data_width2); 994 u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w); 995 996 if (seg_max > STEDMA40_MAX_SEG_SIZE) 997 seg_max -= max_w; 998 999 if (!IS_ALIGNED(size, max_w)) 1000 return -EINVAL; 1001 1002 if (size <= seg_max) 1003 dmalen = 1; 1004 else { 1005 dmalen = size / seg_max; 1006 if (dmalen * seg_max < size) 1007 dmalen++; 1008 } 1009 return dmalen; 1010 } 1011 1012 static int d40_sg_2_dmalen(struct scatterlist *sgl, int sg_len, 1013 u32 data_width1, u32 data_width2) 1014 { 1015 struct scatterlist *sg; 1016 int i; 1017 int len = 0; 1018 int ret; 1019 1020 for_each_sg(sgl, sg, sg_len, i) { 1021 ret = d40_size_2_dmalen(sg_dma_len(sg), 1022 data_width1, data_width2); 1023 if (ret < 0) 1024 return ret; 1025 len += ret; 1026 } 1027 return len; 1028 } 1029 1030 static int __d40_execute_command_phy(struct d40_chan *d40c, 1031 enum d40_command command) 1032 { 1033 u32 status; 1034 int i; 1035 void __iomem *active_reg; 1036 int ret = 0; 1037 unsigned long flags; 1038 u32 wmask; 1039 1040 if (command == D40_DMA_STOP) { 1041 ret = __d40_execute_command_phy(d40c, D40_DMA_SUSPEND_REQ); 1042 if (ret) 1043 return ret; 1044 } 1045 1046 spin_lock_irqsave(&d40c->base->execmd_lock, flags); 1047 1048 if (d40c->phy_chan->num % 2 == 0) 1049 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE; 1050 else 1051 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO; 1052 1053 if (command == D40_DMA_SUSPEND_REQ) { 1054 status = (readl(active_reg) & 1055 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> 1056 D40_CHAN_POS(d40c->phy_chan->num); 1057 1058 if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP) 1059 goto unlock; 1060 } 1061 1062 wmask = 0xffffffff & ~(D40_CHAN_POS_MASK(d40c->phy_chan->num)); 1063 writel(wmask | (command << D40_CHAN_POS(d40c->phy_chan->num)), 1064 active_reg); 1065 1066 if (command == D40_DMA_SUSPEND_REQ) { 1067 1068 for (i = 0 ; i < D40_SUSPEND_MAX_IT; i++) { 1069 status = (readl(active_reg) & 1070 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> 1071 D40_CHAN_POS(d40c->phy_chan->num); 1072 1073 cpu_relax(); 1074 /* 1075 * Reduce the number of bus accesses while 1076 * waiting for the DMA to suspend. 1077 */ 1078 udelay(3); 1079 1080 if (status == D40_DMA_STOP || 1081 status == D40_DMA_SUSPENDED) 1082 break; 1083 } 1084 1085 if (i == D40_SUSPEND_MAX_IT) { 1086 chan_err(d40c, 1087 "unable to suspend the chl %d (log: %d) status %x\n", 1088 d40c->phy_chan->num, d40c->log_num, 1089 status); 1090 dump_stack(); 1091 ret = -EBUSY; 1092 } 1093 1094 } 1095 unlock: 1096 spin_unlock_irqrestore(&d40c->base->execmd_lock, flags); 1097 return ret; 1098 } 1099 1100 static void d40_term_all(struct d40_chan *d40c) 1101 { 1102 struct d40_desc *d40d; 1103 struct d40_desc *_d; 1104 1105 /* Release completed descriptors */ 1106 while ((d40d = d40_first_done(d40c))) { 1107 d40_desc_remove(d40d); 1108 d40_desc_free(d40c, d40d); 1109 } 1110 1111 /* Release active descriptors */ 1112 while ((d40d = d40_first_active_get(d40c))) { 1113 d40_desc_remove(d40d); 1114 d40_desc_free(d40c, d40d); 1115 } 1116 1117 /* Release queued descriptors waiting for transfer */ 1118 while ((d40d = d40_first_queued(d40c))) { 1119 d40_desc_remove(d40d); 1120 d40_desc_free(d40c, d40d); 1121 } 1122 1123 /* Release pending descriptors */ 1124 while ((d40d = d40_first_pending(d40c))) { 1125 d40_desc_remove(d40d); 1126 d40_desc_free(d40c, d40d); 1127 } 1128 1129 /* Release client owned descriptors */ 1130 if (!list_empty(&d40c->client)) 1131 list_for_each_entry_safe(d40d, _d, &d40c->client, node) { 1132 d40_desc_remove(d40d); 1133 d40_desc_free(d40c, d40d); 1134 } 1135 1136 /* Release descriptors in prepare queue */ 1137 if (!list_empty(&d40c->prepare_queue)) 1138 list_for_each_entry_safe(d40d, _d, 1139 &d40c->prepare_queue, node) { 1140 d40_desc_remove(d40d); 1141 d40_desc_free(d40c, d40d); 1142 } 1143 1144 d40c->pending_tx = 0; 1145 } 1146 1147 static void __d40_config_set_event(struct d40_chan *d40c, 1148 enum d40_events event_type, u32 event, 1149 int reg) 1150 { 1151 void __iomem *addr = chan_base(d40c) + reg; 1152 int tries; 1153 u32 status; 1154 1155 switch (event_type) { 1156 1157 case D40_DEACTIVATE_EVENTLINE: 1158 1159 writel((D40_DEACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event)) 1160 | ~D40_EVENTLINE_MASK(event), addr); 1161 break; 1162 1163 case D40_SUSPEND_REQ_EVENTLINE: 1164 status = (readl(addr) & D40_EVENTLINE_MASK(event)) >> 1165 D40_EVENTLINE_POS(event); 1166 1167 if (status == D40_DEACTIVATE_EVENTLINE || 1168 status == D40_SUSPEND_REQ_EVENTLINE) 1169 break; 1170 1171 writel((D40_SUSPEND_REQ_EVENTLINE << D40_EVENTLINE_POS(event)) 1172 | ~D40_EVENTLINE_MASK(event), addr); 1173 1174 for (tries = 0 ; tries < D40_SUSPEND_MAX_IT; tries++) { 1175 1176 status = (readl(addr) & D40_EVENTLINE_MASK(event)) >> 1177 D40_EVENTLINE_POS(event); 1178 1179 cpu_relax(); 1180 /* 1181 * Reduce the number of bus accesses while 1182 * waiting for the DMA to suspend. 1183 */ 1184 udelay(3); 1185 1186 if (status == D40_DEACTIVATE_EVENTLINE) 1187 break; 1188 } 1189 1190 if (tries == D40_SUSPEND_MAX_IT) { 1191 chan_err(d40c, 1192 "unable to stop the event_line chl %d (log: %d)" 1193 "status %x\n", d40c->phy_chan->num, 1194 d40c->log_num, status); 1195 } 1196 break; 1197 1198 case D40_ACTIVATE_EVENTLINE: 1199 /* 1200 * The hardware sometimes doesn't register the enable when src and dst 1201 * event lines are active on the same logical channel. Retry to ensure 1202 * it does. Usually only one retry is sufficient. 1203 */ 1204 tries = 100; 1205 while (--tries) { 1206 writel((D40_ACTIVATE_EVENTLINE << 1207 D40_EVENTLINE_POS(event)) | 1208 ~D40_EVENTLINE_MASK(event), addr); 1209 1210 if (readl(addr) & D40_EVENTLINE_MASK(event)) 1211 break; 1212 } 1213 1214 if (tries != 99) 1215 dev_dbg(chan2dev(d40c), 1216 "[%s] workaround enable S%cLNK (%d tries)\n", 1217 __func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D', 1218 100 - tries); 1219 1220 WARN_ON(!tries); 1221 break; 1222 1223 case D40_ROUND_EVENTLINE: 1224 BUG(); 1225 break; 1226 1227 } 1228 } 1229 1230 static void d40_config_set_event(struct d40_chan *d40c, 1231 enum d40_events event_type) 1232 { 1233 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); 1234 1235 /* Enable event line connected to device (or memcpy) */ 1236 if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) || 1237 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) 1238 __d40_config_set_event(d40c, event_type, event, 1239 D40_CHAN_REG_SSLNK); 1240 1241 if (d40c->dma_cfg.dir != DMA_DEV_TO_MEM) 1242 __d40_config_set_event(d40c, event_type, event, 1243 D40_CHAN_REG_SDLNK); 1244 } 1245 1246 static u32 d40_chan_has_events(struct d40_chan *d40c) 1247 { 1248 void __iomem *chanbase = chan_base(d40c); 1249 u32 val; 1250 1251 val = readl(chanbase + D40_CHAN_REG_SSLNK); 1252 val |= readl(chanbase + D40_CHAN_REG_SDLNK); 1253 1254 return val; 1255 } 1256 1257 static int 1258 __d40_execute_command_log(struct d40_chan *d40c, enum d40_command command) 1259 { 1260 unsigned long flags; 1261 int ret = 0; 1262 u32 active_status; 1263 void __iomem *active_reg; 1264 1265 if (d40c->phy_chan->num % 2 == 0) 1266 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE; 1267 else 1268 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO; 1269 1270 1271 spin_lock_irqsave(&d40c->phy_chan->lock, flags); 1272 1273 switch (command) { 1274 case D40_DMA_STOP: 1275 case D40_DMA_SUSPEND_REQ: 1276 1277 active_status = (readl(active_reg) & 1278 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> 1279 D40_CHAN_POS(d40c->phy_chan->num); 1280 1281 if (active_status == D40_DMA_RUN) 1282 d40_config_set_event(d40c, D40_SUSPEND_REQ_EVENTLINE); 1283 else 1284 d40_config_set_event(d40c, D40_DEACTIVATE_EVENTLINE); 1285 1286 if (!d40_chan_has_events(d40c) && (command == D40_DMA_STOP)) 1287 ret = __d40_execute_command_phy(d40c, command); 1288 1289 break; 1290 1291 case D40_DMA_RUN: 1292 1293 d40_config_set_event(d40c, D40_ACTIVATE_EVENTLINE); 1294 ret = __d40_execute_command_phy(d40c, command); 1295 break; 1296 1297 case D40_DMA_SUSPENDED: 1298 BUG(); 1299 break; 1300 } 1301 1302 spin_unlock_irqrestore(&d40c->phy_chan->lock, flags); 1303 return ret; 1304 } 1305 1306 static int d40_channel_execute_command(struct d40_chan *d40c, 1307 enum d40_command command) 1308 { 1309 if (chan_is_logical(d40c)) 1310 return __d40_execute_command_log(d40c, command); 1311 else 1312 return __d40_execute_command_phy(d40c, command); 1313 } 1314 1315 static u32 d40_get_prmo(struct d40_chan *d40c) 1316 { 1317 static const unsigned int phy_map[] = { 1318 [STEDMA40_PCHAN_BASIC_MODE] 1319 = D40_DREG_PRMO_PCHAN_BASIC, 1320 [STEDMA40_PCHAN_MODULO_MODE] 1321 = D40_DREG_PRMO_PCHAN_MODULO, 1322 [STEDMA40_PCHAN_DOUBLE_DST_MODE] 1323 = D40_DREG_PRMO_PCHAN_DOUBLE_DST, 1324 }; 1325 static const unsigned int log_map[] = { 1326 [STEDMA40_LCHAN_SRC_PHY_DST_LOG] 1327 = D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG, 1328 [STEDMA40_LCHAN_SRC_LOG_DST_PHY] 1329 = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY, 1330 [STEDMA40_LCHAN_SRC_LOG_DST_LOG] 1331 = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG, 1332 }; 1333 1334 if (chan_is_physical(d40c)) 1335 return phy_map[d40c->dma_cfg.mode_opt]; 1336 else 1337 return log_map[d40c->dma_cfg.mode_opt]; 1338 } 1339 1340 static void d40_config_write(struct d40_chan *d40c) 1341 { 1342 u32 addr_base; 1343 u32 var; 1344 1345 /* Odd addresses are even addresses + 4 */ 1346 addr_base = (d40c->phy_chan->num % 2) * 4; 1347 /* Setup channel mode to logical or physical */ 1348 var = ((u32)(chan_is_logical(d40c)) + 1) << 1349 D40_CHAN_POS(d40c->phy_chan->num); 1350 writel(var, d40c->base->virtbase + D40_DREG_PRMSE + addr_base); 1351 1352 /* Setup operational mode option register */ 1353 var = d40_get_prmo(d40c) << D40_CHAN_POS(d40c->phy_chan->num); 1354 1355 writel(var, d40c->base->virtbase + D40_DREG_PRMOE + addr_base); 1356 1357 if (chan_is_logical(d40c)) { 1358 int lidx = (d40c->phy_chan->num << D40_SREG_ELEM_LOG_LIDX_POS) 1359 & D40_SREG_ELEM_LOG_LIDX_MASK; 1360 void __iomem *chanbase = chan_base(d40c); 1361 1362 /* Set default config for CFG reg */ 1363 writel(d40c->src_def_cfg, chanbase + D40_CHAN_REG_SSCFG); 1364 writel(d40c->dst_def_cfg, chanbase + D40_CHAN_REG_SDCFG); 1365 1366 /* Set LIDX for lcla */ 1367 writel(lidx, chanbase + D40_CHAN_REG_SSELT); 1368 writel(lidx, chanbase + D40_CHAN_REG_SDELT); 1369 1370 /* Clear LNK which will be used by d40_chan_has_events() */ 1371 writel(0, chanbase + D40_CHAN_REG_SSLNK); 1372 writel(0, chanbase + D40_CHAN_REG_SDLNK); 1373 } 1374 } 1375 1376 static u32 d40_residue(struct d40_chan *d40c) 1377 { 1378 u32 num_elt; 1379 1380 if (chan_is_logical(d40c)) 1381 num_elt = (readl(&d40c->lcpa->lcsp2) & D40_MEM_LCSP2_ECNT_MASK) 1382 >> D40_MEM_LCSP2_ECNT_POS; 1383 else { 1384 u32 val = readl(chan_base(d40c) + D40_CHAN_REG_SDELT); 1385 num_elt = (val & D40_SREG_ELEM_PHY_ECNT_MASK) 1386 >> D40_SREG_ELEM_PHY_ECNT_POS; 1387 } 1388 1389 return num_elt * d40c->dma_cfg.dst_info.data_width; 1390 } 1391 1392 static bool d40_tx_is_linked(struct d40_chan *d40c) 1393 { 1394 bool is_link; 1395 1396 if (chan_is_logical(d40c)) 1397 is_link = readl(&d40c->lcpa->lcsp3) & D40_MEM_LCSP3_DLOS_MASK; 1398 else 1399 is_link = readl(chan_base(d40c) + D40_CHAN_REG_SDLNK) 1400 & D40_SREG_LNK_PHYS_LNK_MASK; 1401 1402 return is_link; 1403 } 1404 1405 static int d40_pause(struct dma_chan *chan) 1406 { 1407 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 1408 int res = 0; 1409 unsigned long flags; 1410 1411 if (d40c->phy_chan == NULL) { 1412 chan_err(d40c, "Channel is not allocated!\n"); 1413 return -EINVAL; 1414 } 1415 1416 if (!d40c->busy) 1417 return 0; 1418 1419 spin_lock_irqsave(&d40c->lock, flags); 1420 pm_runtime_get_sync(d40c->base->dev); 1421 1422 res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); 1423 1424 pm_runtime_mark_last_busy(d40c->base->dev); 1425 pm_runtime_put_autosuspend(d40c->base->dev); 1426 spin_unlock_irqrestore(&d40c->lock, flags); 1427 return res; 1428 } 1429 1430 static int d40_resume(struct dma_chan *chan) 1431 { 1432 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 1433 int res = 0; 1434 unsigned long flags; 1435 1436 if (d40c->phy_chan == NULL) { 1437 chan_err(d40c, "Channel is not allocated!\n"); 1438 return -EINVAL; 1439 } 1440 1441 if (!d40c->busy) 1442 return 0; 1443 1444 spin_lock_irqsave(&d40c->lock, flags); 1445 pm_runtime_get_sync(d40c->base->dev); 1446 1447 /* If bytes left to transfer or linked tx resume job */ 1448 if (d40_residue(d40c) || d40_tx_is_linked(d40c)) 1449 res = d40_channel_execute_command(d40c, D40_DMA_RUN); 1450 1451 pm_runtime_mark_last_busy(d40c->base->dev); 1452 pm_runtime_put_autosuspend(d40c->base->dev); 1453 spin_unlock_irqrestore(&d40c->lock, flags); 1454 return res; 1455 } 1456 1457 static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx) 1458 { 1459 struct d40_chan *d40c = container_of(tx->chan, 1460 struct d40_chan, 1461 chan); 1462 struct d40_desc *d40d = container_of(tx, struct d40_desc, txd); 1463 unsigned long flags; 1464 dma_cookie_t cookie; 1465 1466 spin_lock_irqsave(&d40c->lock, flags); 1467 cookie = dma_cookie_assign(tx); 1468 d40_desc_queue(d40c, d40d); 1469 spin_unlock_irqrestore(&d40c->lock, flags); 1470 1471 return cookie; 1472 } 1473 1474 static int d40_start(struct d40_chan *d40c) 1475 { 1476 return d40_channel_execute_command(d40c, D40_DMA_RUN); 1477 } 1478 1479 static struct d40_desc *d40_queue_start(struct d40_chan *d40c) 1480 { 1481 struct d40_desc *d40d; 1482 int err; 1483 1484 /* Start queued jobs, if any */ 1485 d40d = d40_first_queued(d40c); 1486 1487 if (d40d != NULL) { 1488 if (!d40c->busy) { 1489 d40c->busy = true; 1490 pm_runtime_get_sync(d40c->base->dev); 1491 } 1492 1493 /* Remove from queue */ 1494 d40_desc_remove(d40d); 1495 1496 /* Add to active queue */ 1497 d40_desc_submit(d40c, d40d); 1498 1499 /* Initiate DMA job */ 1500 d40_desc_load(d40c, d40d); 1501 1502 /* Start dma job */ 1503 err = d40_start(d40c); 1504 1505 if (err) 1506 return NULL; 1507 } 1508 1509 return d40d; 1510 } 1511 1512 /* called from interrupt context */ 1513 static void dma_tc_handle(struct d40_chan *d40c) 1514 { 1515 struct d40_desc *d40d; 1516 1517 /* Get first active entry from list */ 1518 d40d = d40_first_active_get(d40c); 1519 1520 if (d40d == NULL) 1521 return; 1522 1523 if (d40d->cyclic) { 1524 /* 1525 * If this was a paritially loaded list, we need to reloaded 1526 * it, and only when the list is completed. We need to check 1527 * for done because the interrupt will hit for every link, and 1528 * not just the last one. 1529 */ 1530 if (d40d->lli_current < d40d->lli_len 1531 && !d40_tx_is_linked(d40c) 1532 && !d40_residue(d40c)) { 1533 d40_lcla_free_all(d40c, d40d); 1534 d40_desc_load(d40c, d40d); 1535 (void) d40_start(d40c); 1536 1537 if (d40d->lli_current == d40d->lli_len) 1538 d40d->lli_current = 0; 1539 } 1540 } else { 1541 d40_lcla_free_all(d40c, d40d); 1542 1543 if (d40d->lli_current < d40d->lli_len) { 1544 d40_desc_load(d40c, d40d); 1545 /* Start dma job */ 1546 (void) d40_start(d40c); 1547 return; 1548 } 1549 1550 if (d40_queue_start(d40c) == NULL) { 1551 d40c->busy = false; 1552 1553 pm_runtime_mark_last_busy(d40c->base->dev); 1554 pm_runtime_put_autosuspend(d40c->base->dev); 1555 } 1556 1557 d40_desc_remove(d40d); 1558 d40_desc_done(d40c, d40d); 1559 } 1560 1561 d40c->pending_tx++; 1562 tasklet_schedule(&d40c->tasklet); 1563 1564 } 1565 1566 static void dma_tasklet(unsigned long data) 1567 { 1568 struct d40_chan *d40c = (struct d40_chan *) data; 1569 struct d40_desc *d40d; 1570 unsigned long flags; 1571 bool callback_active; 1572 struct dmaengine_desc_callback cb; 1573 1574 spin_lock_irqsave(&d40c->lock, flags); 1575 1576 /* Get first entry from the done list */ 1577 d40d = d40_first_done(d40c); 1578 if (d40d == NULL) { 1579 /* Check if we have reached here for cyclic job */ 1580 d40d = d40_first_active_get(d40c); 1581 if (d40d == NULL || !d40d->cyclic) 1582 goto check_pending_tx; 1583 } 1584 1585 if (!d40d->cyclic) 1586 dma_cookie_complete(&d40d->txd); 1587 1588 /* 1589 * If terminating a channel pending_tx is set to zero. 1590 * This prevents any finished active jobs to return to the client. 1591 */ 1592 if (d40c->pending_tx == 0) { 1593 spin_unlock_irqrestore(&d40c->lock, flags); 1594 return; 1595 } 1596 1597 /* Callback to client */ 1598 callback_active = !!(d40d->txd.flags & DMA_PREP_INTERRUPT); 1599 dmaengine_desc_get_callback(&d40d->txd, &cb); 1600 1601 if (!d40d->cyclic) { 1602 if (async_tx_test_ack(&d40d->txd)) { 1603 d40_desc_remove(d40d); 1604 d40_desc_free(d40c, d40d); 1605 } else if (!d40d->is_in_client_list) { 1606 d40_desc_remove(d40d); 1607 d40_lcla_free_all(d40c, d40d); 1608 list_add_tail(&d40d->node, &d40c->client); 1609 d40d->is_in_client_list = true; 1610 } 1611 } 1612 1613 d40c->pending_tx--; 1614 1615 if (d40c->pending_tx) 1616 tasklet_schedule(&d40c->tasklet); 1617 1618 spin_unlock_irqrestore(&d40c->lock, flags); 1619 1620 if (callback_active) 1621 dmaengine_desc_callback_invoke(&cb, NULL); 1622 1623 return; 1624 check_pending_tx: 1625 /* Rescue manouver if receiving double interrupts */ 1626 if (d40c->pending_tx > 0) 1627 d40c->pending_tx--; 1628 spin_unlock_irqrestore(&d40c->lock, flags); 1629 } 1630 1631 static irqreturn_t d40_handle_interrupt(int irq, void *data) 1632 { 1633 int i; 1634 u32 idx; 1635 u32 row; 1636 long chan = -1; 1637 struct d40_chan *d40c; 1638 unsigned long flags; 1639 struct d40_base *base = data; 1640 u32 regs[base->gen_dmac.il_size]; 1641 struct d40_interrupt_lookup *il = base->gen_dmac.il; 1642 u32 il_size = base->gen_dmac.il_size; 1643 1644 spin_lock_irqsave(&base->interrupt_lock, flags); 1645 1646 /* Read interrupt status of both logical and physical channels */ 1647 for (i = 0; i < il_size; i++) 1648 regs[i] = readl(base->virtbase + il[i].src); 1649 1650 for (;;) { 1651 1652 chan = find_next_bit((unsigned long *)regs, 1653 BITS_PER_LONG * il_size, chan + 1); 1654 1655 /* No more set bits found? */ 1656 if (chan == BITS_PER_LONG * il_size) 1657 break; 1658 1659 row = chan / BITS_PER_LONG; 1660 idx = chan & (BITS_PER_LONG - 1); 1661 1662 if (il[row].offset == D40_PHY_CHAN) 1663 d40c = base->lookup_phy_chans[idx]; 1664 else 1665 d40c = base->lookup_log_chans[il[row].offset + idx]; 1666 1667 if (!d40c) { 1668 /* 1669 * No error because this can happen if something else 1670 * in the system is using the channel. 1671 */ 1672 continue; 1673 } 1674 1675 /* ACK interrupt */ 1676 writel(BIT(idx), base->virtbase + il[row].clr); 1677 1678 spin_lock(&d40c->lock); 1679 1680 if (!il[row].is_error) 1681 dma_tc_handle(d40c); 1682 else 1683 d40_err(base->dev, "IRQ chan: %ld offset %d idx %d\n", 1684 chan, il[row].offset, idx); 1685 1686 spin_unlock(&d40c->lock); 1687 } 1688 1689 spin_unlock_irqrestore(&base->interrupt_lock, flags); 1690 1691 return IRQ_HANDLED; 1692 } 1693 1694 static int d40_validate_conf(struct d40_chan *d40c, 1695 struct stedma40_chan_cfg *conf) 1696 { 1697 int res = 0; 1698 bool is_log = conf->mode == STEDMA40_MODE_LOGICAL; 1699 1700 if (!conf->dir) { 1701 chan_err(d40c, "Invalid direction.\n"); 1702 res = -EINVAL; 1703 } 1704 1705 if ((is_log && conf->dev_type > d40c->base->num_log_chans) || 1706 (!is_log && conf->dev_type > d40c->base->num_phy_chans) || 1707 (conf->dev_type < 0)) { 1708 chan_err(d40c, "Invalid device type (%d)\n", conf->dev_type); 1709 res = -EINVAL; 1710 } 1711 1712 if (conf->dir == DMA_DEV_TO_DEV) { 1713 /* 1714 * DMAC HW supports it. Will be added to this driver, 1715 * in case any dma client requires it. 1716 */ 1717 chan_err(d40c, "periph to periph not supported\n"); 1718 res = -EINVAL; 1719 } 1720 1721 if (d40_psize_2_burst_size(is_log, conf->src_info.psize) * 1722 conf->src_info.data_width != 1723 d40_psize_2_burst_size(is_log, conf->dst_info.psize) * 1724 conf->dst_info.data_width) { 1725 /* 1726 * The DMAC hardware only supports 1727 * src (burst x width) == dst (burst x width) 1728 */ 1729 1730 chan_err(d40c, "src (burst x width) != dst (burst x width)\n"); 1731 res = -EINVAL; 1732 } 1733 1734 return res; 1735 } 1736 1737 static bool d40_alloc_mask_set(struct d40_phy_res *phy, 1738 bool is_src, int log_event_line, bool is_log, 1739 bool *first_user) 1740 { 1741 unsigned long flags; 1742 spin_lock_irqsave(&phy->lock, flags); 1743 1744 *first_user = ((phy->allocated_src | phy->allocated_dst) 1745 == D40_ALLOC_FREE); 1746 1747 if (!is_log) { 1748 /* Physical interrupts are masked per physical full channel */ 1749 if (phy->allocated_src == D40_ALLOC_FREE && 1750 phy->allocated_dst == D40_ALLOC_FREE) { 1751 phy->allocated_dst = D40_ALLOC_PHY; 1752 phy->allocated_src = D40_ALLOC_PHY; 1753 goto found_unlock; 1754 } else 1755 goto not_found_unlock; 1756 } 1757 1758 /* Logical channel */ 1759 if (is_src) { 1760 if (phy->allocated_src == D40_ALLOC_PHY) 1761 goto not_found_unlock; 1762 1763 if (phy->allocated_src == D40_ALLOC_FREE) 1764 phy->allocated_src = D40_ALLOC_LOG_FREE; 1765 1766 if (!(phy->allocated_src & BIT(log_event_line))) { 1767 phy->allocated_src |= BIT(log_event_line); 1768 goto found_unlock; 1769 } else 1770 goto not_found_unlock; 1771 } else { 1772 if (phy->allocated_dst == D40_ALLOC_PHY) 1773 goto not_found_unlock; 1774 1775 if (phy->allocated_dst == D40_ALLOC_FREE) 1776 phy->allocated_dst = D40_ALLOC_LOG_FREE; 1777 1778 if (!(phy->allocated_dst & BIT(log_event_line))) { 1779 phy->allocated_dst |= BIT(log_event_line); 1780 goto found_unlock; 1781 } 1782 } 1783 not_found_unlock: 1784 spin_unlock_irqrestore(&phy->lock, flags); 1785 return false; 1786 found_unlock: 1787 spin_unlock_irqrestore(&phy->lock, flags); 1788 return true; 1789 } 1790 1791 static bool d40_alloc_mask_free(struct d40_phy_res *phy, bool is_src, 1792 int log_event_line) 1793 { 1794 unsigned long flags; 1795 bool is_free = false; 1796 1797 spin_lock_irqsave(&phy->lock, flags); 1798 if (!log_event_line) { 1799 phy->allocated_dst = D40_ALLOC_FREE; 1800 phy->allocated_src = D40_ALLOC_FREE; 1801 is_free = true; 1802 goto unlock; 1803 } 1804 1805 /* Logical channel */ 1806 if (is_src) { 1807 phy->allocated_src &= ~BIT(log_event_line); 1808 if (phy->allocated_src == D40_ALLOC_LOG_FREE) 1809 phy->allocated_src = D40_ALLOC_FREE; 1810 } else { 1811 phy->allocated_dst &= ~BIT(log_event_line); 1812 if (phy->allocated_dst == D40_ALLOC_LOG_FREE) 1813 phy->allocated_dst = D40_ALLOC_FREE; 1814 } 1815 1816 is_free = ((phy->allocated_src | phy->allocated_dst) == 1817 D40_ALLOC_FREE); 1818 unlock: 1819 spin_unlock_irqrestore(&phy->lock, flags); 1820 1821 return is_free; 1822 } 1823 1824 static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user) 1825 { 1826 int dev_type = d40c->dma_cfg.dev_type; 1827 int event_group; 1828 int event_line; 1829 struct d40_phy_res *phys; 1830 int i; 1831 int j; 1832 int log_num; 1833 int num_phy_chans; 1834 bool is_src; 1835 bool is_log = d40c->dma_cfg.mode == STEDMA40_MODE_LOGICAL; 1836 1837 phys = d40c->base->phy_res; 1838 num_phy_chans = d40c->base->num_phy_chans; 1839 1840 if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) { 1841 log_num = 2 * dev_type; 1842 is_src = true; 1843 } else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || 1844 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { 1845 /* dst event lines are used for logical memcpy */ 1846 log_num = 2 * dev_type + 1; 1847 is_src = false; 1848 } else 1849 return -EINVAL; 1850 1851 event_group = D40_TYPE_TO_GROUP(dev_type); 1852 event_line = D40_TYPE_TO_EVENT(dev_type); 1853 1854 if (!is_log) { 1855 if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { 1856 /* Find physical half channel */ 1857 if (d40c->dma_cfg.use_fixed_channel) { 1858 i = d40c->dma_cfg.phy_channel; 1859 if (d40_alloc_mask_set(&phys[i], is_src, 1860 0, is_log, 1861 first_phy_user)) 1862 goto found_phy; 1863 } else { 1864 for (i = 0; i < num_phy_chans; i++) { 1865 if (d40_alloc_mask_set(&phys[i], is_src, 1866 0, is_log, 1867 first_phy_user)) 1868 goto found_phy; 1869 } 1870 } 1871 } else 1872 for (j = 0; j < d40c->base->num_phy_chans; j += 8) { 1873 int phy_num = j + event_group * 2; 1874 for (i = phy_num; i < phy_num + 2; i++) { 1875 if (d40_alloc_mask_set(&phys[i], 1876 is_src, 1877 0, 1878 is_log, 1879 first_phy_user)) 1880 goto found_phy; 1881 } 1882 } 1883 return -EINVAL; 1884 found_phy: 1885 d40c->phy_chan = &phys[i]; 1886 d40c->log_num = D40_PHY_CHAN; 1887 goto out; 1888 } 1889 if (dev_type == -1) 1890 return -EINVAL; 1891 1892 /* Find logical channel */ 1893 for (j = 0; j < d40c->base->num_phy_chans; j += 8) { 1894 int phy_num = j + event_group * 2; 1895 1896 if (d40c->dma_cfg.use_fixed_channel) { 1897 i = d40c->dma_cfg.phy_channel; 1898 1899 if ((i != phy_num) && (i != phy_num + 1)) { 1900 dev_err(chan2dev(d40c), 1901 "invalid fixed phy channel %d\n", i); 1902 return -EINVAL; 1903 } 1904 1905 if (d40_alloc_mask_set(&phys[i], is_src, event_line, 1906 is_log, first_phy_user)) 1907 goto found_log; 1908 1909 dev_err(chan2dev(d40c), 1910 "could not allocate fixed phy channel %d\n", i); 1911 return -EINVAL; 1912 } 1913 1914 /* 1915 * Spread logical channels across all available physical rather 1916 * than pack every logical channel at the first available phy 1917 * channels. 1918 */ 1919 if (is_src) { 1920 for (i = phy_num; i < phy_num + 2; i++) { 1921 if (d40_alloc_mask_set(&phys[i], is_src, 1922 event_line, is_log, 1923 first_phy_user)) 1924 goto found_log; 1925 } 1926 } else { 1927 for (i = phy_num + 1; i >= phy_num; i--) { 1928 if (d40_alloc_mask_set(&phys[i], is_src, 1929 event_line, is_log, 1930 first_phy_user)) 1931 goto found_log; 1932 } 1933 } 1934 } 1935 return -EINVAL; 1936 1937 found_log: 1938 d40c->phy_chan = &phys[i]; 1939 d40c->log_num = log_num; 1940 out: 1941 1942 if (is_log) 1943 d40c->base->lookup_log_chans[d40c->log_num] = d40c; 1944 else 1945 d40c->base->lookup_phy_chans[d40c->phy_chan->num] = d40c; 1946 1947 return 0; 1948 1949 } 1950 1951 static int d40_config_memcpy(struct d40_chan *d40c) 1952 { 1953 dma_cap_mask_t cap = d40c->chan.device->cap_mask; 1954 1955 if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) { 1956 d40c->dma_cfg = dma40_memcpy_conf_log; 1957 d40c->dma_cfg.dev_type = dma40_memcpy_channels[d40c->chan.chan_id]; 1958 1959 d40_log_cfg(&d40c->dma_cfg, 1960 &d40c->log_def.lcsp1, &d40c->log_def.lcsp3); 1961 1962 } else if (dma_has_cap(DMA_MEMCPY, cap) && 1963 dma_has_cap(DMA_SLAVE, cap)) { 1964 d40c->dma_cfg = dma40_memcpy_conf_phy; 1965 1966 /* Generate interrrupt at end of transfer or relink. */ 1967 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS); 1968 1969 /* Generate interrupt on error. */ 1970 d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS); 1971 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS); 1972 1973 } else { 1974 chan_err(d40c, "No memcpy\n"); 1975 return -EINVAL; 1976 } 1977 1978 return 0; 1979 } 1980 1981 static int d40_free_dma(struct d40_chan *d40c) 1982 { 1983 1984 int res = 0; 1985 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); 1986 struct d40_phy_res *phy = d40c->phy_chan; 1987 bool is_src; 1988 1989 /* Terminate all queued and active transfers */ 1990 d40_term_all(d40c); 1991 1992 if (phy == NULL) { 1993 chan_err(d40c, "phy == null\n"); 1994 return -EINVAL; 1995 } 1996 1997 if (phy->allocated_src == D40_ALLOC_FREE && 1998 phy->allocated_dst == D40_ALLOC_FREE) { 1999 chan_err(d40c, "channel already free\n"); 2000 return -EINVAL; 2001 } 2002 2003 if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || 2004 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) 2005 is_src = false; 2006 else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) 2007 is_src = true; 2008 else { 2009 chan_err(d40c, "Unknown direction\n"); 2010 return -EINVAL; 2011 } 2012 2013 pm_runtime_get_sync(d40c->base->dev); 2014 res = d40_channel_execute_command(d40c, D40_DMA_STOP); 2015 if (res) { 2016 chan_err(d40c, "stop failed\n"); 2017 goto mark_last_busy; 2018 } 2019 2020 d40_alloc_mask_free(phy, is_src, chan_is_logical(d40c) ? event : 0); 2021 2022 if (chan_is_logical(d40c)) 2023 d40c->base->lookup_log_chans[d40c->log_num] = NULL; 2024 else 2025 d40c->base->lookup_phy_chans[phy->num] = NULL; 2026 2027 if (d40c->busy) { 2028 pm_runtime_mark_last_busy(d40c->base->dev); 2029 pm_runtime_put_autosuspend(d40c->base->dev); 2030 } 2031 2032 d40c->busy = false; 2033 d40c->phy_chan = NULL; 2034 d40c->configured = false; 2035 mark_last_busy: 2036 pm_runtime_mark_last_busy(d40c->base->dev); 2037 pm_runtime_put_autosuspend(d40c->base->dev); 2038 return res; 2039 } 2040 2041 static bool d40_is_paused(struct d40_chan *d40c) 2042 { 2043 void __iomem *chanbase = chan_base(d40c); 2044 bool is_paused = false; 2045 unsigned long flags; 2046 void __iomem *active_reg; 2047 u32 status; 2048 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); 2049 2050 spin_lock_irqsave(&d40c->lock, flags); 2051 2052 if (chan_is_physical(d40c)) { 2053 if (d40c->phy_chan->num % 2 == 0) 2054 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE; 2055 else 2056 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO; 2057 2058 status = (readl(active_reg) & 2059 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> 2060 D40_CHAN_POS(d40c->phy_chan->num); 2061 if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP) 2062 is_paused = true; 2063 goto unlock; 2064 } 2065 2066 if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || 2067 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { 2068 status = readl(chanbase + D40_CHAN_REG_SDLNK); 2069 } else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) { 2070 status = readl(chanbase + D40_CHAN_REG_SSLNK); 2071 } else { 2072 chan_err(d40c, "Unknown direction\n"); 2073 goto unlock; 2074 } 2075 2076 status = (status & D40_EVENTLINE_MASK(event)) >> 2077 D40_EVENTLINE_POS(event); 2078 2079 if (status != D40_DMA_RUN) 2080 is_paused = true; 2081 unlock: 2082 spin_unlock_irqrestore(&d40c->lock, flags); 2083 return is_paused; 2084 2085 } 2086 2087 static u32 stedma40_residue(struct dma_chan *chan) 2088 { 2089 struct d40_chan *d40c = 2090 container_of(chan, struct d40_chan, chan); 2091 u32 bytes_left; 2092 unsigned long flags; 2093 2094 spin_lock_irqsave(&d40c->lock, flags); 2095 bytes_left = d40_residue(d40c); 2096 spin_unlock_irqrestore(&d40c->lock, flags); 2097 2098 return bytes_left; 2099 } 2100 2101 static int 2102 d40_prep_sg_log(struct d40_chan *chan, struct d40_desc *desc, 2103 struct scatterlist *sg_src, struct scatterlist *sg_dst, 2104 unsigned int sg_len, dma_addr_t src_dev_addr, 2105 dma_addr_t dst_dev_addr) 2106 { 2107 struct stedma40_chan_cfg *cfg = &chan->dma_cfg; 2108 struct stedma40_half_channel_info *src_info = &cfg->src_info; 2109 struct stedma40_half_channel_info *dst_info = &cfg->dst_info; 2110 int ret; 2111 2112 ret = d40_log_sg_to_lli(sg_src, sg_len, 2113 src_dev_addr, 2114 desc->lli_log.src, 2115 chan->log_def.lcsp1, 2116 src_info->data_width, 2117 dst_info->data_width); 2118 2119 ret = d40_log_sg_to_lli(sg_dst, sg_len, 2120 dst_dev_addr, 2121 desc->lli_log.dst, 2122 chan->log_def.lcsp3, 2123 dst_info->data_width, 2124 src_info->data_width); 2125 2126 return ret < 0 ? ret : 0; 2127 } 2128 2129 static int 2130 d40_prep_sg_phy(struct d40_chan *chan, struct d40_desc *desc, 2131 struct scatterlist *sg_src, struct scatterlist *sg_dst, 2132 unsigned int sg_len, dma_addr_t src_dev_addr, 2133 dma_addr_t dst_dev_addr) 2134 { 2135 struct stedma40_chan_cfg *cfg = &chan->dma_cfg; 2136 struct stedma40_half_channel_info *src_info = &cfg->src_info; 2137 struct stedma40_half_channel_info *dst_info = &cfg->dst_info; 2138 unsigned long flags = 0; 2139 int ret; 2140 2141 if (desc->cyclic) 2142 flags |= LLI_CYCLIC | LLI_TERM_INT; 2143 2144 ret = d40_phy_sg_to_lli(sg_src, sg_len, src_dev_addr, 2145 desc->lli_phy.src, 2146 virt_to_phys(desc->lli_phy.src), 2147 chan->src_def_cfg, 2148 src_info, dst_info, flags); 2149 2150 ret = d40_phy_sg_to_lli(sg_dst, sg_len, dst_dev_addr, 2151 desc->lli_phy.dst, 2152 virt_to_phys(desc->lli_phy.dst), 2153 chan->dst_def_cfg, 2154 dst_info, src_info, flags); 2155 2156 dma_sync_single_for_device(chan->base->dev, desc->lli_pool.dma_addr, 2157 desc->lli_pool.size, DMA_TO_DEVICE); 2158 2159 return ret < 0 ? ret : 0; 2160 } 2161 2162 static struct d40_desc * 2163 d40_prep_desc(struct d40_chan *chan, struct scatterlist *sg, 2164 unsigned int sg_len, unsigned long dma_flags) 2165 { 2166 struct stedma40_chan_cfg *cfg; 2167 struct d40_desc *desc; 2168 int ret; 2169 2170 desc = d40_desc_get(chan); 2171 if (!desc) 2172 return NULL; 2173 2174 cfg = &chan->dma_cfg; 2175 desc->lli_len = d40_sg_2_dmalen(sg, sg_len, cfg->src_info.data_width, 2176 cfg->dst_info.data_width); 2177 if (desc->lli_len < 0) { 2178 chan_err(chan, "Unaligned size\n"); 2179 goto free_desc; 2180 } 2181 2182 ret = d40_pool_lli_alloc(chan, desc, desc->lli_len); 2183 if (ret < 0) { 2184 chan_err(chan, "Could not allocate lli\n"); 2185 goto free_desc; 2186 } 2187 2188 desc->lli_current = 0; 2189 desc->txd.flags = dma_flags; 2190 desc->txd.tx_submit = d40_tx_submit; 2191 2192 dma_async_tx_descriptor_init(&desc->txd, &chan->chan); 2193 2194 return desc; 2195 free_desc: 2196 d40_desc_free(chan, desc); 2197 return NULL; 2198 } 2199 2200 static struct dma_async_tx_descriptor * 2201 d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src, 2202 struct scatterlist *sg_dst, unsigned int sg_len, 2203 enum dma_transfer_direction direction, unsigned long dma_flags) 2204 { 2205 struct d40_chan *chan = container_of(dchan, struct d40_chan, chan); 2206 dma_addr_t src_dev_addr; 2207 dma_addr_t dst_dev_addr; 2208 struct d40_desc *desc; 2209 unsigned long flags; 2210 int ret; 2211 2212 if (!chan->phy_chan) { 2213 chan_err(chan, "Cannot prepare unallocated channel\n"); 2214 return NULL; 2215 } 2216 2217 spin_lock_irqsave(&chan->lock, flags); 2218 2219 desc = d40_prep_desc(chan, sg_src, sg_len, dma_flags); 2220 if (desc == NULL) 2221 goto unlock; 2222 2223 if (sg_next(&sg_src[sg_len - 1]) == sg_src) 2224 desc->cyclic = true; 2225 2226 src_dev_addr = 0; 2227 dst_dev_addr = 0; 2228 if (direction == DMA_DEV_TO_MEM) 2229 src_dev_addr = chan->runtime_addr; 2230 else if (direction == DMA_MEM_TO_DEV) 2231 dst_dev_addr = chan->runtime_addr; 2232 2233 if (chan_is_logical(chan)) 2234 ret = d40_prep_sg_log(chan, desc, sg_src, sg_dst, 2235 sg_len, src_dev_addr, dst_dev_addr); 2236 else 2237 ret = d40_prep_sg_phy(chan, desc, sg_src, sg_dst, 2238 sg_len, src_dev_addr, dst_dev_addr); 2239 2240 if (ret) { 2241 chan_err(chan, "Failed to prepare %s sg job: %d\n", 2242 chan_is_logical(chan) ? "log" : "phy", ret); 2243 goto free_desc; 2244 } 2245 2246 /* 2247 * add descriptor to the prepare queue in order to be able 2248 * to free them later in terminate_all 2249 */ 2250 list_add_tail(&desc->node, &chan->prepare_queue); 2251 2252 spin_unlock_irqrestore(&chan->lock, flags); 2253 2254 return &desc->txd; 2255 free_desc: 2256 d40_desc_free(chan, desc); 2257 unlock: 2258 spin_unlock_irqrestore(&chan->lock, flags); 2259 return NULL; 2260 } 2261 2262 bool stedma40_filter(struct dma_chan *chan, void *data) 2263 { 2264 struct stedma40_chan_cfg *info = data; 2265 struct d40_chan *d40c = 2266 container_of(chan, struct d40_chan, chan); 2267 int err; 2268 2269 if (data) { 2270 err = d40_validate_conf(d40c, info); 2271 if (!err) 2272 d40c->dma_cfg = *info; 2273 } else 2274 err = d40_config_memcpy(d40c); 2275 2276 if (!err) 2277 d40c->configured = true; 2278 2279 return err == 0; 2280 } 2281 EXPORT_SYMBOL(stedma40_filter); 2282 2283 static void __d40_set_prio_rt(struct d40_chan *d40c, int dev_type, bool src) 2284 { 2285 bool realtime = d40c->dma_cfg.realtime; 2286 bool highprio = d40c->dma_cfg.high_priority; 2287 u32 rtreg; 2288 u32 event = D40_TYPE_TO_EVENT(dev_type); 2289 u32 group = D40_TYPE_TO_GROUP(dev_type); 2290 u32 bit = BIT(event); 2291 u32 prioreg; 2292 struct d40_gen_dmac *dmac = &d40c->base->gen_dmac; 2293 2294 rtreg = realtime ? dmac->realtime_en : dmac->realtime_clear; 2295 /* 2296 * Due to a hardware bug, in some cases a logical channel triggered by 2297 * a high priority destination event line can generate extra packet 2298 * transactions. 2299 * 2300 * The workaround is to not set the high priority level for the 2301 * destination event lines that trigger logical channels. 2302 */ 2303 if (!src && chan_is_logical(d40c)) 2304 highprio = false; 2305 2306 prioreg = highprio ? dmac->high_prio_en : dmac->high_prio_clear; 2307 2308 /* Destination event lines are stored in the upper halfword */ 2309 if (!src) 2310 bit <<= 16; 2311 2312 writel(bit, d40c->base->virtbase + prioreg + group * 4); 2313 writel(bit, d40c->base->virtbase + rtreg + group * 4); 2314 } 2315 2316 static void d40_set_prio_realtime(struct d40_chan *d40c) 2317 { 2318 if (d40c->base->rev < 3) 2319 return; 2320 2321 if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) || 2322 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) 2323 __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true); 2324 2325 if ((d40c->dma_cfg.dir == DMA_MEM_TO_DEV) || 2326 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) 2327 __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false); 2328 } 2329 2330 #define D40_DT_FLAGS_MODE(flags) ((flags >> 0) & 0x1) 2331 #define D40_DT_FLAGS_DIR(flags) ((flags >> 1) & 0x1) 2332 #define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1) 2333 #define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1) 2334 #define D40_DT_FLAGS_HIGH_PRIO(flags) ((flags >> 4) & 0x1) 2335 2336 static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec, 2337 struct of_dma *ofdma) 2338 { 2339 struct stedma40_chan_cfg cfg; 2340 dma_cap_mask_t cap; 2341 u32 flags; 2342 2343 memset(&cfg, 0, sizeof(struct stedma40_chan_cfg)); 2344 2345 dma_cap_zero(cap); 2346 dma_cap_set(DMA_SLAVE, cap); 2347 2348 cfg.dev_type = dma_spec->args[0]; 2349 flags = dma_spec->args[2]; 2350 2351 switch (D40_DT_FLAGS_MODE(flags)) { 2352 case 0: cfg.mode = STEDMA40_MODE_LOGICAL; break; 2353 case 1: cfg.mode = STEDMA40_MODE_PHYSICAL; break; 2354 } 2355 2356 switch (D40_DT_FLAGS_DIR(flags)) { 2357 case 0: 2358 cfg.dir = DMA_MEM_TO_DEV; 2359 cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags); 2360 break; 2361 case 1: 2362 cfg.dir = DMA_DEV_TO_MEM; 2363 cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags); 2364 break; 2365 } 2366 2367 if (D40_DT_FLAGS_FIXED_CHAN(flags)) { 2368 cfg.phy_channel = dma_spec->args[1]; 2369 cfg.use_fixed_channel = true; 2370 } 2371 2372 if (D40_DT_FLAGS_HIGH_PRIO(flags)) 2373 cfg.high_priority = true; 2374 2375 return dma_request_channel(cap, stedma40_filter, &cfg); 2376 } 2377 2378 /* DMA ENGINE functions */ 2379 static int d40_alloc_chan_resources(struct dma_chan *chan) 2380 { 2381 int err; 2382 unsigned long flags; 2383 struct d40_chan *d40c = 2384 container_of(chan, struct d40_chan, chan); 2385 bool is_free_phy; 2386 spin_lock_irqsave(&d40c->lock, flags); 2387 2388 dma_cookie_init(chan); 2389 2390 /* If no dma configuration is set use default configuration (memcpy) */ 2391 if (!d40c->configured) { 2392 err = d40_config_memcpy(d40c); 2393 if (err) { 2394 chan_err(d40c, "Failed to configure memcpy channel\n"); 2395 goto mark_last_busy; 2396 } 2397 } 2398 2399 err = d40_allocate_channel(d40c, &is_free_phy); 2400 if (err) { 2401 chan_err(d40c, "Failed to allocate channel\n"); 2402 d40c->configured = false; 2403 goto mark_last_busy; 2404 } 2405 2406 pm_runtime_get_sync(d40c->base->dev); 2407 2408 d40_set_prio_realtime(d40c); 2409 2410 if (chan_is_logical(d40c)) { 2411 if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) 2412 d40c->lcpa = d40c->base->lcpa_base + 2413 d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE; 2414 else 2415 d40c->lcpa = d40c->base->lcpa_base + 2416 d40c->dma_cfg.dev_type * 2417 D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA; 2418 2419 /* Unmask the Global Interrupt Mask. */ 2420 d40c->src_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS); 2421 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS); 2422 } 2423 2424 dev_dbg(chan2dev(d40c), "allocated %s channel (phy %d%s)\n", 2425 chan_is_logical(d40c) ? "logical" : "physical", 2426 d40c->phy_chan->num, 2427 d40c->dma_cfg.use_fixed_channel ? ", fixed" : ""); 2428 2429 2430 /* 2431 * Only write channel configuration to the DMA if the physical 2432 * resource is free. In case of multiple logical channels 2433 * on the same physical resource, only the first write is necessary. 2434 */ 2435 if (is_free_phy) 2436 d40_config_write(d40c); 2437 mark_last_busy: 2438 pm_runtime_mark_last_busy(d40c->base->dev); 2439 pm_runtime_put_autosuspend(d40c->base->dev); 2440 spin_unlock_irqrestore(&d40c->lock, flags); 2441 return err; 2442 } 2443 2444 static void d40_free_chan_resources(struct dma_chan *chan) 2445 { 2446 struct d40_chan *d40c = 2447 container_of(chan, struct d40_chan, chan); 2448 int err; 2449 unsigned long flags; 2450 2451 if (d40c->phy_chan == NULL) { 2452 chan_err(d40c, "Cannot free unallocated channel\n"); 2453 return; 2454 } 2455 2456 spin_lock_irqsave(&d40c->lock, flags); 2457 2458 err = d40_free_dma(d40c); 2459 2460 if (err) 2461 chan_err(d40c, "Failed to free channel\n"); 2462 spin_unlock_irqrestore(&d40c->lock, flags); 2463 } 2464 2465 static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, 2466 dma_addr_t dst, 2467 dma_addr_t src, 2468 size_t size, 2469 unsigned long dma_flags) 2470 { 2471 struct scatterlist dst_sg; 2472 struct scatterlist src_sg; 2473 2474 sg_init_table(&dst_sg, 1); 2475 sg_init_table(&src_sg, 1); 2476 2477 sg_dma_address(&dst_sg) = dst; 2478 sg_dma_address(&src_sg) = src; 2479 2480 sg_dma_len(&dst_sg) = size; 2481 sg_dma_len(&src_sg) = size; 2482 2483 return d40_prep_sg(chan, &src_sg, &dst_sg, 1, 2484 DMA_MEM_TO_MEM, dma_flags); 2485 } 2486 2487 static struct dma_async_tx_descriptor * 2488 d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, 2489 unsigned int sg_len, enum dma_transfer_direction direction, 2490 unsigned long dma_flags, void *context) 2491 { 2492 if (!is_slave_direction(direction)) 2493 return NULL; 2494 2495 return d40_prep_sg(chan, sgl, sgl, sg_len, direction, dma_flags); 2496 } 2497 2498 static struct dma_async_tx_descriptor * 2499 dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr, 2500 size_t buf_len, size_t period_len, 2501 enum dma_transfer_direction direction, unsigned long flags) 2502 { 2503 unsigned int periods = buf_len / period_len; 2504 struct dma_async_tx_descriptor *txd; 2505 struct scatterlist *sg; 2506 int i; 2507 2508 sg = kcalloc(periods + 1, sizeof(struct scatterlist), GFP_NOWAIT); 2509 if (!sg) 2510 return NULL; 2511 2512 for (i = 0; i < periods; i++) { 2513 sg_dma_address(&sg[i]) = dma_addr; 2514 sg_dma_len(&sg[i]) = period_len; 2515 dma_addr += period_len; 2516 } 2517 2518 sg_chain(sg, periods + 1, sg); 2519 2520 txd = d40_prep_sg(chan, sg, sg, periods, direction, 2521 DMA_PREP_INTERRUPT); 2522 2523 kfree(sg); 2524 2525 return txd; 2526 } 2527 2528 static enum dma_status d40_tx_status(struct dma_chan *chan, 2529 dma_cookie_t cookie, 2530 struct dma_tx_state *txstate) 2531 { 2532 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 2533 enum dma_status ret; 2534 2535 if (d40c->phy_chan == NULL) { 2536 chan_err(d40c, "Cannot read status of unallocated channel\n"); 2537 return -EINVAL; 2538 } 2539 2540 ret = dma_cookie_status(chan, cookie, txstate); 2541 if (ret != DMA_COMPLETE && txstate) 2542 dma_set_residue(txstate, stedma40_residue(chan)); 2543 2544 if (d40_is_paused(d40c)) 2545 ret = DMA_PAUSED; 2546 2547 return ret; 2548 } 2549 2550 static void d40_issue_pending(struct dma_chan *chan) 2551 { 2552 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 2553 unsigned long flags; 2554 2555 if (d40c->phy_chan == NULL) { 2556 chan_err(d40c, "Channel is not allocated!\n"); 2557 return; 2558 } 2559 2560 spin_lock_irqsave(&d40c->lock, flags); 2561 2562 list_splice_tail_init(&d40c->pending_queue, &d40c->queue); 2563 2564 /* Busy means that queued jobs are already being processed */ 2565 if (!d40c->busy) 2566 (void) d40_queue_start(d40c); 2567 2568 spin_unlock_irqrestore(&d40c->lock, flags); 2569 } 2570 2571 static int d40_terminate_all(struct dma_chan *chan) 2572 { 2573 unsigned long flags; 2574 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 2575 int ret; 2576 2577 if (d40c->phy_chan == NULL) { 2578 chan_err(d40c, "Channel is not allocated!\n"); 2579 return -EINVAL; 2580 } 2581 2582 spin_lock_irqsave(&d40c->lock, flags); 2583 2584 pm_runtime_get_sync(d40c->base->dev); 2585 ret = d40_channel_execute_command(d40c, D40_DMA_STOP); 2586 if (ret) 2587 chan_err(d40c, "Failed to stop channel\n"); 2588 2589 d40_term_all(d40c); 2590 pm_runtime_mark_last_busy(d40c->base->dev); 2591 pm_runtime_put_autosuspend(d40c->base->dev); 2592 if (d40c->busy) { 2593 pm_runtime_mark_last_busy(d40c->base->dev); 2594 pm_runtime_put_autosuspend(d40c->base->dev); 2595 } 2596 d40c->busy = false; 2597 2598 spin_unlock_irqrestore(&d40c->lock, flags); 2599 return 0; 2600 } 2601 2602 static int 2603 dma40_config_to_halfchannel(struct d40_chan *d40c, 2604 struct stedma40_half_channel_info *info, 2605 u32 maxburst) 2606 { 2607 int psize; 2608 2609 if (chan_is_logical(d40c)) { 2610 if (maxburst >= 16) 2611 psize = STEDMA40_PSIZE_LOG_16; 2612 else if (maxburst >= 8) 2613 psize = STEDMA40_PSIZE_LOG_8; 2614 else if (maxburst >= 4) 2615 psize = STEDMA40_PSIZE_LOG_4; 2616 else 2617 psize = STEDMA40_PSIZE_LOG_1; 2618 } else { 2619 if (maxburst >= 16) 2620 psize = STEDMA40_PSIZE_PHY_16; 2621 else if (maxburst >= 8) 2622 psize = STEDMA40_PSIZE_PHY_8; 2623 else if (maxburst >= 4) 2624 psize = STEDMA40_PSIZE_PHY_4; 2625 else 2626 psize = STEDMA40_PSIZE_PHY_1; 2627 } 2628 2629 info->psize = psize; 2630 info->flow_ctrl = STEDMA40_NO_FLOW_CTRL; 2631 2632 return 0; 2633 } 2634 2635 /* Runtime reconfiguration extension */ 2636 static int d40_set_runtime_config(struct dma_chan *chan, 2637 struct dma_slave_config *config) 2638 { 2639 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 2640 struct stedma40_chan_cfg *cfg = &d40c->dma_cfg; 2641 enum dma_slave_buswidth src_addr_width, dst_addr_width; 2642 dma_addr_t config_addr; 2643 u32 src_maxburst, dst_maxburst; 2644 int ret; 2645 2646 if (d40c->phy_chan == NULL) { 2647 chan_err(d40c, "Channel is not allocated!\n"); 2648 return -EINVAL; 2649 } 2650 2651 src_addr_width = config->src_addr_width; 2652 src_maxburst = config->src_maxburst; 2653 dst_addr_width = config->dst_addr_width; 2654 dst_maxburst = config->dst_maxburst; 2655 2656 if (config->direction == DMA_DEV_TO_MEM) { 2657 config_addr = config->src_addr; 2658 2659 if (cfg->dir != DMA_DEV_TO_MEM) 2660 dev_dbg(d40c->base->dev, 2661 "channel was not configured for peripheral " 2662 "to memory transfer (%d) overriding\n", 2663 cfg->dir); 2664 cfg->dir = DMA_DEV_TO_MEM; 2665 2666 /* Configure the memory side */ 2667 if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) 2668 dst_addr_width = src_addr_width; 2669 if (dst_maxburst == 0) 2670 dst_maxburst = src_maxburst; 2671 2672 } else if (config->direction == DMA_MEM_TO_DEV) { 2673 config_addr = config->dst_addr; 2674 2675 if (cfg->dir != DMA_MEM_TO_DEV) 2676 dev_dbg(d40c->base->dev, 2677 "channel was not configured for memory " 2678 "to peripheral transfer (%d) overriding\n", 2679 cfg->dir); 2680 cfg->dir = DMA_MEM_TO_DEV; 2681 2682 /* Configure the memory side */ 2683 if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) 2684 src_addr_width = dst_addr_width; 2685 if (src_maxburst == 0) 2686 src_maxburst = dst_maxburst; 2687 } else { 2688 dev_err(d40c->base->dev, 2689 "unrecognized channel direction %d\n", 2690 config->direction); 2691 return -EINVAL; 2692 } 2693 2694 if (config_addr <= 0) { 2695 dev_err(d40c->base->dev, "no address supplied\n"); 2696 return -EINVAL; 2697 } 2698 2699 if (src_maxburst * src_addr_width != dst_maxburst * dst_addr_width) { 2700 dev_err(d40c->base->dev, 2701 "src/dst width/maxburst mismatch: %d*%d != %d*%d\n", 2702 src_maxburst, 2703 src_addr_width, 2704 dst_maxburst, 2705 dst_addr_width); 2706 return -EINVAL; 2707 } 2708 2709 if (src_maxburst > 16) { 2710 src_maxburst = 16; 2711 dst_maxburst = src_maxburst * src_addr_width / dst_addr_width; 2712 } else if (dst_maxburst > 16) { 2713 dst_maxburst = 16; 2714 src_maxburst = dst_maxburst * dst_addr_width / src_addr_width; 2715 } 2716 2717 /* Only valid widths are; 1, 2, 4 and 8. */ 2718 if (src_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED || 2719 src_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES || 2720 dst_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED || 2721 dst_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES || 2722 !is_power_of_2(src_addr_width) || 2723 !is_power_of_2(dst_addr_width)) 2724 return -EINVAL; 2725 2726 cfg->src_info.data_width = src_addr_width; 2727 cfg->dst_info.data_width = dst_addr_width; 2728 2729 ret = dma40_config_to_halfchannel(d40c, &cfg->src_info, 2730 src_maxburst); 2731 if (ret) 2732 return ret; 2733 2734 ret = dma40_config_to_halfchannel(d40c, &cfg->dst_info, 2735 dst_maxburst); 2736 if (ret) 2737 return ret; 2738 2739 /* Fill in register values */ 2740 if (chan_is_logical(d40c)) 2741 d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3); 2742 else 2743 d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg); 2744 2745 /* These settings will take precedence later */ 2746 d40c->runtime_addr = config_addr; 2747 d40c->runtime_direction = config->direction; 2748 dev_dbg(d40c->base->dev, 2749 "configured channel %s for %s, data width %d/%d, " 2750 "maxburst %d/%d elements, LE, no flow control\n", 2751 dma_chan_name(chan), 2752 (config->direction == DMA_DEV_TO_MEM) ? "RX" : "TX", 2753 src_addr_width, dst_addr_width, 2754 src_maxburst, dst_maxburst); 2755 2756 return 0; 2757 } 2758 2759 /* Initialization functions */ 2760 2761 static void __init d40_chan_init(struct d40_base *base, struct dma_device *dma, 2762 struct d40_chan *chans, int offset, 2763 int num_chans) 2764 { 2765 int i = 0; 2766 struct d40_chan *d40c; 2767 2768 INIT_LIST_HEAD(&dma->channels); 2769 2770 for (i = offset; i < offset + num_chans; i++) { 2771 d40c = &chans[i]; 2772 d40c->base = base; 2773 d40c->chan.device = dma; 2774 2775 spin_lock_init(&d40c->lock); 2776 2777 d40c->log_num = D40_PHY_CHAN; 2778 2779 INIT_LIST_HEAD(&d40c->done); 2780 INIT_LIST_HEAD(&d40c->active); 2781 INIT_LIST_HEAD(&d40c->queue); 2782 INIT_LIST_HEAD(&d40c->pending_queue); 2783 INIT_LIST_HEAD(&d40c->client); 2784 INIT_LIST_HEAD(&d40c->prepare_queue); 2785 2786 tasklet_init(&d40c->tasklet, dma_tasklet, 2787 (unsigned long) d40c); 2788 2789 list_add_tail(&d40c->chan.device_node, 2790 &dma->channels); 2791 } 2792 } 2793 2794 static void d40_ops_init(struct d40_base *base, struct dma_device *dev) 2795 { 2796 if (dma_has_cap(DMA_SLAVE, dev->cap_mask)) { 2797 dev->device_prep_slave_sg = d40_prep_slave_sg; 2798 dev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); 2799 } 2800 2801 if (dma_has_cap(DMA_MEMCPY, dev->cap_mask)) { 2802 dev->device_prep_dma_memcpy = d40_prep_memcpy; 2803 dev->directions = BIT(DMA_MEM_TO_MEM); 2804 /* 2805 * This controller can only access address at even 2806 * 32bit boundaries, i.e. 2^2 2807 */ 2808 dev->copy_align = DMAENGINE_ALIGN_4_BYTES; 2809 } 2810 2811 if (dma_has_cap(DMA_CYCLIC, dev->cap_mask)) 2812 dev->device_prep_dma_cyclic = dma40_prep_dma_cyclic; 2813 2814 dev->device_alloc_chan_resources = d40_alloc_chan_resources; 2815 dev->device_free_chan_resources = d40_free_chan_resources; 2816 dev->device_issue_pending = d40_issue_pending; 2817 dev->device_tx_status = d40_tx_status; 2818 dev->device_config = d40_set_runtime_config; 2819 dev->device_pause = d40_pause; 2820 dev->device_resume = d40_resume; 2821 dev->device_terminate_all = d40_terminate_all; 2822 dev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; 2823 dev->dev = base->dev; 2824 } 2825 2826 static int __init d40_dmaengine_init(struct d40_base *base, 2827 int num_reserved_chans) 2828 { 2829 int err ; 2830 2831 d40_chan_init(base, &base->dma_slave, base->log_chans, 2832 0, base->num_log_chans); 2833 2834 dma_cap_zero(base->dma_slave.cap_mask); 2835 dma_cap_set(DMA_SLAVE, base->dma_slave.cap_mask); 2836 dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask); 2837 2838 d40_ops_init(base, &base->dma_slave); 2839 2840 err = dma_async_device_register(&base->dma_slave); 2841 2842 if (err) { 2843 d40_err(base->dev, "Failed to register slave channels\n"); 2844 goto exit; 2845 } 2846 2847 d40_chan_init(base, &base->dma_memcpy, base->log_chans, 2848 base->num_log_chans, base->num_memcpy_chans); 2849 2850 dma_cap_zero(base->dma_memcpy.cap_mask); 2851 dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask); 2852 2853 d40_ops_init(base, &base->dma_memcpy); 2854 2855 err = dma_async_device_register(&base->dma_memcpy); 2856 2857 if (err) { 2858 d40_err(base->dev, 2859 "Failed to register memcpy only channels\n"); 2860 goto unregister_slave; 2861 } 2862 2863 d40_chan_init(base, &base->dma_both, base->phy_chans, 2864 0, num_reserved_chans); 2865 2866 dma_cap_zero(base->dma_both.cap_mask); 2867 dma_cap_set(DMA_SLAVE, base->dma_both.cap_mask); 2868 dma_cap_set(DMA_MEMCPY, base->dma_both.cap_mask); 2869 dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask); 2870 2871 d40_ops_init(base, &base->dma_both); 2872 err = dma_async_device_register(&base->dma_both); 2873 2874 if (err) { 2875 d40_err(base->dev, 2876 "Failed to register logical and physical capable channels\n"); 2877 goto unregister_memcpy; 2878 } 2879 return 0; 2880 unregister_memcpy: 2881 dma_async_device_unregister(&base->dma_memcpy); 2882 unregister_slave: 2883 dma_async_device_unregister(&base->dma_slave); 2884 exit: 2885 return err; 2886 } 2887 2888 /* Suspend resume functionality */ 2889 #ifdef CONFIG_PM_SLEEP 2890 static int dma40_suspend(struct device *dev) 2891 { 2892 struct platform_device *pdev = to_platform_device(dev); 2893 struct d40_base *base = platform_get_drvdata(pdev); 2894 int ret; 2895 2896 ret = pm_runtime_force_suspend(dev); 2897 if (ret) 2898 return ret; 2899 2900 if (base->lcpa_regulator) 2901 ret = regulator_disable(base->lcpa_regulator); 2902 return ret; 2903 } 2904 2905 static int dma40_resume(struct device *dev) 2906 { 2907 struct platform_device *pdev = to_platform_device(dev); 2908 struct d40_base *base = platform_get_drvdata(pdev); 2909 int ret = 0; 2910 2911 if (base->lcpa_regulator) { 2912 ret = regulator_enable(base->lcpa_regulator); 2913 if (ret) 2914 return ret; 2915 } 2916 2917 return pm_runtime_force_resume(dev); 2918 } 2919 #endif 2920 2921 #ifdef CONFIG_PM 2922 static void dma40_backup(void __iomem *baseaddr, u32 *backup, 2923 u32 *regaddr, int num, bool save) 2924 { 2925 int i; 2926 2927 for (i = 0; i < num; i++) { 2928 void __iomem *addr = baseaddr + regaddr[i]; 2929 2930 if (save) 2931 backup[i] = readl_relaxed(addr); 2932 else 2933 writel_relaxed(backup[i], addr); 2934 } 2935 } 2936 2937 static void d40_save_restore_registers(struct d40_base *base, bool save) 2938 { 2939 int i; 2940 2941 /* Save/Restore channel specific registers */ 2942 for (i = 0; i < base->num_phy_chans; i++) { 2943 void __iomem *addr; 2944 int idx; 2945 2946 if (base->phy_res[i].reserved) 2947 continue; 2948 2949 addr = base->virtbase + D40_DREG_PCBASE + i * D40_DREG_PCDELTA; 2950 idx = i * ARRAY_SIZE(d40_backup_regs_chan); 2951 2952 dma40_backup(addr, &base->reg_val_backup_chan[idx], 2953 d40_backup_regs_chan, 2954 ARRAY_SIZE(d40_backup_regs_chan), 2955 save); 2956 } 2957 2958 /* Save/Restore global registers */ 2959 dma40_backup(base->virtbase, base->reg_val_backup, 2960 d40_backup_regs, ARRAY_SIZE(d40_backup_regs), 2961 save); 2962 2963 /* Save/Restore registers only existing on dma40 v3 and later */ 2964 if (base->gen_dmac.backup) 2965 dma40_backup(base->virtbase, base->reg_val_backup_v4, 2966 base->gen_dmac.backup, 2967 base->gen_dmac.backup_size, 2968 save); 2969 } 2970 2971 static int dma40_runtime_suspend(struct device *dev) 2972 { 2973 struct platform_device *pdev = to_platform_device(dev); 2974 struct d40_base *base = platform_get_drvdata(pdev); 2975 2976 d40_save_restore_registers(base, true); 2977 2978 /* Don't disable/enable clocks for v1 due to HW bugs */ 2979 if (base->rev != 1) 2980 writel_relaxed(base->gcc_pwr_off_mask, 2981 base->virtbase + D40_DREG_GCC); 2982 2983 return 0; 2984 } 2985 2986 static int dma40_runtime_resume(struct device *dev) 2987 { 2988 struct platform_device *pdev = to_platform_device(dev); 2989 struct d40_base *base = platform_get_drvdata(pdev); 2990 2991 d40_save_restore_registers(base, false); 2992 2993 writel_relaxed(D40_DREG_GCC_ENABLE_ALL, 2994 base->virtbase + D40_DREG_GCC); 2995 return 0; 2996 } 2997 #endif 2998 2999 static const struct dev_pm_ops dma40_pm_ops = { 3000 SET_LATE_SYSTEM_SLEEP_PM_OPS(dma40_suspend, dma40_resume) 3001 SET_RUNTIME_PM_OPS(dma40_runtime_suspend, 3002 dma40_runtime_resume, 3003 NULL) 3004 }; 3005 3006 /* Initialization functions. */ 3007 3008 static int __init d40_phy_res_init(struct d40_base *base) 3009 { 3010 int i; 3011 int num_phy_chans_avail = 0; 3012 u32 val[2]; 3013 int odd_even_bit = -2; 3014 int gcc = D40_DREG_GCC_ENA; 3015 3016 val[0] = readl(base->virtbase + D40_DREG_PRSME); 3017 val[1] = readl(base->virtbase + D40_DREG_PRSMO); 3018 3019 for (i = 0; i < base->num_phy_chans; i++) { 3020 base->phy_res[i].num = i; 3021 odd_even_bit += 2 * ((i % 2) == 0); 3022 if (((val[i % 2] >> odd_even_bit) & 3) == 1) { 3023 /* Mark security only channels as occupied */ 3024 base->phy_res[i].allocated_src = D40_ALLOC_PHY; 3025 base->phy_res[i].allocated_dst = D40_ALLOC_PHY; 3026 base->phy_res[i].reserved = true; 3027 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i), 3028 D40_DREG_GCC_SRC); 3029 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i), 3030 D40_DREG_GCC_DST); 3031 3032 3033 } else { 3034 base->phy_res[i].allocated_src = D40_ALLOC_FREE; 3035 base->phy_res[i].allocated_dst = D40_ALLOC_FREE; 3036 base->phy_res[i].reserved = false; 3037 num_phy_chans_avail++; 3038 } 3039 spin_lock_init(&base->phy_res[i].lock); 3040 } 3041 3042 /* Mark disabled channels as occupied */ 3043 for (i = 0; base->plat_data->disabled_channels[i] != -1; i++) { 3044 int chan = base->plat_data->disabled_channels[i]; 3045 3046 base->phy_res[chan].allocated_src = D40_ALLOC_PHY; 3047 base->phy_res[chan].allocated_dst = D40_ALLOC_PHY; 3048 base->phy_res[chan].reserved = true; 3049 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan), 3050 D40_DREG_GCC_SRC); 3051 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan), 3052 D40_DREG_GCC_DST); 3053 num_phy_chans_avail--; 3054 } 3055 3056 /* Mark soft_lli channels */ 3057 for (i = 0; i < base->plat_data->num_of_soft_lli_chans; i++) { 3058 int chan = base->plat_data->soft_lli_chans[i]; 3059 3060 base->phy_res[chan].use_soft_lli = true; 3061 } 3062 3063 dev_info(base->dev, "%d of %d physical DMA channels available\n", 3064 num_phy_chans_avail, base->num_phy_chans); 3065 3066 /* Verify settings extended vs standard */ 3067 val[0] = readl(base->virtbase + D40_DREG_PRTYP); 3068 3069 for (i = 0; i < base->num_phy_chans; i++) { 3070 3071 if (base->phy_res[i].allocated_src == D40_ALLOC_FREE && 3072 (val[0] & 0x3) != 1) 3073 dev_info(base->dev, 3074 "[%s] INFO: channel %d is misconfigured (%d)\n", 3075 __func__, i, val[0] & 0x3); 3076 3077 val[0] = val[0] >> 2; 3078 } 3079 3080 /* 3081 * To keep things simple, Enable all clocks initially. 3082 * The clocks will get managed later post channel allocation. 3083 * The clocks for the event lines on which reserved channels exists 3084 * are not managed here. 3085 */ 3086 writel(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC); 3087 base->gcc_pwr_off_mask = gcc; 3088 3089 return num_phy_chans_avail; 3090 } 3091 3092 static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) 3093 { 3094 struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev); 3095 struct clk *clk; 3096 void __iomem *virtbase; 3097 struct resource *res; 3098 struct d40_base *base; 3099 int num_log_chans; 3100 int num_phy_chans; 3101 int num_memcpy_chans; 3102 int clk_ret = -EINVAL; 3103 int i; 3104 u32 pid; 3105 u32 cid; 3106 u8 rev; 3107 3108 clk = clk_get(&pdev->dev, NULL); 3109 if (IS_ERR(clk)) { 3110 d40_err(&pdev->dev, "No matching clock found\n"); 3111 goto check_prepare_enabled; 3112 } 3113 3114 clk_ret = clk_prepare_enable(clk); 3115 if (clk_ret) { 3116 d40_err(&pdev->dev, "Failed to prepare/enable clock\n"); 3117 goto disable_unprepare; 3118 } 3119 3120 /* Get IO for DMAC base address */ 3121 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "base"); 3122 if (!res) 3123 goto disable_unprepare; 3124 3125 if (request_mem_region(res->start, resource_size(res), 3126 D40_NAME " I/O base") == NULL) 3127 goto release_region; 3128 3129 virtbase = ioremap(res->start, resource_size(res)); 3130 if (!virtbase) 3131 goto release_region; 3132 3133 /* This is just a regular AMBA PrimeCell ID actually */ 3134 for (pid = 0, i = 0; i < 4; i++) 3135 pid |= (readl(virtbase + resource_size(res) - 0x20 + 4 * i) 3136 & 255) << (i * 8); 3137 for (cid = 0, i = 0; i < 4; i++) 3138 cid |= (readl(virtbase + resource_size(res) - 0x10 + 4 * i) 3139 & 255) << (i * 8); 3140 3141 if (cid != AMBA_CID) { 3142 d40_err(&pdev->dev, "Unknown hardware! No PrimeCell ID\n"); 3143 goto unmap_io; 3144 } 3145 if (AMBA_MANF_BITS(pid) != AMBA_VENDOR_ST) { 3146 d40_err(&pdev->dev, "Unknown designer! Got %x wanted %x\n", 3147 AMBA_MANF_BITS(pid), 3148 AMBA_VENDOR_ST); 3149 goto unmap_io; 3150 } 3151 /* 3152 * HW revision: 3153 * DB8500ed has revision 0 3154 * ? has revision 1 3155 * DB8500v1 has revision 2 3156 * DB8500v2 has revision 3 3157 * AP9540v1 has revision 4 3158 * DB8540v1 has revision 4 3159 */ 3160 rev = AMBA_REV_BITS(pid); 3161 if (rev < 2) { 3162 d40_err(&pdev->dev, "hardware revision: %d is not supported", rev); 3163 goto unmap_io; 3164 } 3165 3166 /* The number of physical channels on this HW */ 3167 if (plat_data->num_of_phy_chans) 3168 num_phy_chans = plat_data->num_of_phy_chans; 3169 else 3170 num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4; 3171 3172 /* The number of channels used for memcpy */ 3173 if (plat_data->num_of_memcpy_chans) 3174 num_memcpy_chans = plat_data->num_of_memcpy_chans; 3175 else 3176 num_memcpy_chans = ARRAY_SIZE(dma40_memcpy_channels); 3177 3178 num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY; 3179 3180 dev_info(&pdev->dev, 3181 "hardware rev: %d @ %pa with %d physical and %d logical channels\n", 3182 rev, &res->start, num_phy_chans, num_log_chans); 3183 3184 base = kzalloc(ALIGN(sizeof(struct d40_base), 4) + 3185 (num_phy_chans + num_log_chans + num_memcpy_chans) * 3186 sizeof(struct d40_chan), GFP_KERNEL); 3187 3188 if (base == NULL) 3189 goto unmap_io; 3190 3191 base->rev = rev; 3192 base->clk = clk; 3193 base->num_memcpy_chans = num_memcpy_chans; 3194 base->num_phy_chans = num_phy_chans; 3195 base->num_log_chans = num_log_chans; 3196 base->phy_start = res->start; 3197 base->phy_size = resource_size(res); 3198 base->virtbase = virtbase; 3199 base->plat_data = plat_data; 3200 base->dev = &pdev->dev; 3201 base->phy_chans = ((void *)base) + ALIGN(sizeof(struct d40_base), 4); 3202 base->log_chans = &base->phy_chans[num_phy_chans]; 3203 3204 if (base->plat_data->num_of_phy_chans == 14) { 3205 base->gen_dmac.backup = d40_backup_regs_v4b; 3206 base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4B; 3207 base->gen_dmac.interrupt_en = D40_DREG_CPCMIS; 3208 base->gen_dmac.interrupt_clear = D40_DREG_CPCICR; 3209 base->gen_dmac.realtime_en = D40_DREG_CRSEG1; 3210 base->gen_dmac.realtime_clear = D40_DREG_CRCEG1; 3211 base->gen_dmac.high_prio_en = D40_DREG_CPSEG1; 3212 base->gen_dmac.high_prio_clear = D40_DREG_CPCEG1; 3213 base->gen_dmac.il = il_v4b; 3214 base->gen_dmac.il_size = ARRAY_SIZE(il_v4b); 3215 base->gen_dmac.init_reg = dma_init_reg_v4b; 3216 base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4b); 3217 } else { 3218 if (base->rev >= 3) { 3219 base->gen_dmac.backup = d40_backup_regs_v4a; 3220 base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4A; 3221 } 3222 base->gen_dmac.interrupt_en = D40_DREG_PCMIS; 3223 base->gen_dmac.interrupt_clear = D40_DREG_PCICR; 3224 base->gen_dmac.realtime_en = D40_DREG_RSEG1; 3225 base->gen_dmac.realtime_clear = D40_DREG_RCEG1; 3226 base->gen_dmac.high_prio_en = D40_DREG_PSEG1; 3227 base->gen_dmac.high_prio_clear = D40_DREG_PCEG1; 3228 base->gen_dmac.il = il_v4a; 3229 base->gen_dmac.il_size = ARRAY_SIZE(il_v4a); 3230 base->gen_dmac.init_reg = dma_init_reg_v4a; 3231 base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4a); 3232 } 3233 3234 base->phy_res = kcalloc(num_phy_chans, 3235 sizeof(*base->phy_res), 3236 GFP_KERNEL); 3237 if (!base->phy_res) 3238 goto free_base; 3239 3240 base->lookup_phy_chans = kcalloc(num_phy_chans, 3241 sizeof(*base->lookup_phy_chans), 3242 GFP_KERNEL); 3243 if (!base->lookup_phy_chans) 3244 goto free_phy_res; 3245 3246 base->lookup_log_chans = kcalloc(num_log_chans, 3247 sizeof(*base->lookup_log_chans), 3248 GFP_KERNEL); 3249 if (!base->lookup_log_chans) 3250 goto free_phy_chans; 3251 3252 base->reg_val_backup_chan = kmalloc_array(base->num_phy_chans, 3253 sizeof(d40_backup_regs_chan), 3254 GFP_KERNEL); 3255 if (!base->reg_val_backup_chan) 3256 goto free_log_chans; 3257 3258 base->lcla_pool.alloc_map = kcalloc(num_phy_chans 3259 * D40_LCLA_LINK_PER_EVENT_GRP, 3260 sizeof(*base->lcla_pool.alloc_map), 3261 GFP_KERNEL); 3262 if (!base->lcla_pool.alloc_map) 3263 goto free_backup_chan; 3264 3265 base->desc_slab = kmem_cache_create(D40_NAME, sizeof(struct d40_desc), 3266 0, SLAB_HWCACHE_ALIGN, 3267 NULL); 3268 if (base->desc_slab == NULL) 3269 goto free_map; 3270 3271 return base; 3272 free_map: 3273 kfree(base->lcla_pool.alloc_map); 3274 free_backup_chan: 3275 kfree(base->reg_val_backup_chan); 3276 free_log_chans: 3277 kfree(base->lookup_log_chans); 3278 free_phy_chans: 3279 kfree(base->lookup_phy_chans); 3280 free_phy_res: 3281 kfree(base->phy_res); 3282 free_base: 3283 kfree(base); 3284 unmap_io: 3285 iounmap(virtbase); 3286 release_region: 3287 release_mem_region(res->start, resource_size(res)); 3288 check_prepare_enabled: 3289 if (!clk_ret) 3290 disable_unprepare: 3291 clk_disable_unprepare(clk); 3292 if (!IS_ERR(clk)) 3293 clk_put(clk); 3294 return NULL; 3295 } 3296 3297 static void __init d40_hw_init(struct d40_base *base) 3298 { 3299 3300 int i; 3301 u32 prmseo[2] = {0, 0}; 3302 u32 activeo[2] = {0xFFFFFFFF, 0xFFFFFFFF}; 3303 u32 pcmis = 0; 3304 u32 pcicr = 0; 3305 struct d40_reg_val *dma_init_reg = base->gen_dmac.init_reg; 3306 u32 reg_size = base->gen_dmac.init_reg_size; 3307 3308 for (i = 0; i < reg_size; i++) 3309 writel(dma_init_reg[i].val, 3310 base->virtbase + dma_init_reg[i].reg); 3311 3312 /* Configure all our dma channels to default settings */ 3313 for (i = 0; i < base->num_phy_chans; i++) { 3314 3315 activeo[i % 2] = activeo[i % 2] << 2; 3316 3317 if (base->phy_res[base->num_phy_chans - i - 1].allocated_src 3318 == D40_ALLOC_PHY) { 3319 activeo[i % 2] |= 3; 3320 continue; 3321 } 3322 3323 /* Enable interrupt # */ 3324 pcmis = (pcmis << 1) | 1; 3325 3326 /* Clear interrupt # */ 3327 pcicr = (pcicr << 1) | 1; 3328 3329 /* Set channel to physical mode */ 3330 prmseo[i % 2] = prmseo[i % 2] << 2; 3331 prmseo[i % 2] |= 1; 3332 3333 } 3334 3335 writel(prmseo[1], base->virtbase + D40_DREG_PRMSE); 3336 writel(prmseo[0], base->virtbase + D40_DREG_PRMSO); 3337 writel(activeo[1], base->virtbase + D40_DREG_ACTIVE); 3338 writel(activeo[0], base->virtbase + D40_DREG_ACTIVO); 3339 3340 /* Write which interrupt to enable */ 3341 writel(pcmis, base->virtbase + base->gen_dmac.interrupt_en); 3342 3343 /* Write which interrupt to clear */ 3344 writel(pcicr, base->virtbase + base->gen_dmac.interrupt_clear); 3345 3346 /* These are __initdata and cannot be accessed after init */ 3347 base->gen_dmac.init_reg = NULL; 3348 base->gen_dmac.init_reg_size = 0; 3349 } 3350 3351 static int __init d40_lcla_allocate(struct d40_base *base) 3352 { 3353 struct d40_lcla_pool *pool = &base->lcla_pool; 3354 unsigned long *page_list; 3355 int i, j; 3356 int ret; 3357 3358 /* 3359 * This is somewhat ugly. We need 8192 bytes that are 18 bit aligned, 3360 * To full fill this hardware requirement without wasting 256 kb 3361 * we allocate pages until we get an aligned one. 3362 */ 3363 page_list = kmalloc_array(MAX_LCLA_ALLOC_ATTEMPTS, 3364 sizeof(*page_list), 3365 GFP_KERNEL); 3366 if (!page_list) 3367 return -ENOMEM; 3368 3369 /* Calculating how many pages that are required */ 3370 base->lcla_pool.pages = SZ_1K * base->num_phy_chans / PAGE_SIZE; 3371 3372 for (i = 0; i < MAX_LCLA_ALLOC_ATTEMPTS; i++) { 3373 page_list[i] = __get_free_pages(GFP_KERNEL, 3374 base->lcla_pool.pages); 3375 if (!page_list[i]) { 3376 3377 d40_err(base->dev, "Failed to allocate %d pages.\n", 3378 base->lcla_pool.pages); 3379 ret = -ENOMEM; 3380 3381 for (j = 0; j < i; j++) 3382 free_pages(page_list[j], base->lcla_pool.pages); 3383 goto free_page_list; 3384 } 3385 3386 if ((virt_to_phys((void *)page_list[i]) & 3387 (LCLA_ALIGNMENT - 1)) == 0) 3388 break; 3389 } 3390 3391 for (j = 0; j < i; j++) 3392 free_pages(page_list[j], base->lcla_pool.pages); 3393 3394 if (i < MAX_LCLA_ALLOC_ATTEMPTS) { 3395 base->lcla_pool.base = (void *)page_list[i]; 3396 } else { 3397 /* 3398 * After many attempts and no succees with finding the correct 3399 * alignment, try with allocating a big buffer. 3400 */ 3401 dev_warn(base->dev, 3402 "[%s] Failed to get %d pages @ 18 bit align.\n", 3403 __func__, base->lcla_pool.pages); 3404 base->lcla_pool.base_unaligned = kmalloc(SZ_1K * 3405 base->num_phy_chans + 3406 LCLA_ALIGNMENT, 3407 GFP_KERNEL); 3408 if (!base->lcla_pool.base_unaligned) { 3409 ret = -ENOMEM; 3410 goto free_page_list; 3411 } 3412 3413 base->lcla_pool.base = PTR_ALIGN(base->lcla_pool.base_unaligned, 3414 LCLA_ALIGNMENT); 3415 } 3416 3417 pool->dma_addr = dma_map_single(base->dev, pool->base, 3418 SZ_1K * base->num_phy_chans, 3419 DMA_TO_DEVICE); 3420 if (dma_mapping_error(base->dev, pool->dma_addr)) { 3421 pool->dma_addr = 0; 3422 ret = -ENOMEM; 3423 goto free_page_list; 3424 } 3425 3426 writel(virt_to_phys(base->lcla_pool.base), 3427 base->virtbase + D40_DREG_LCLA); 3428 ret = 0; 3429 free_page_list: 3430 kfree(page_list); 3431 return ret; 3432 } 3433 3434 static int __init d40_of_probe(struct platform_device *pdev, 3435 struct device_node *np) 3436 { 3437 struct stedma40_platform_data *pdata; 3438 int num_phy = 0, num_memcpy = 0, num_disabled = 0; 3439 const __be32 *list; 3440 3441 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); 3442 if (!pdata) 3443 return -ENOMEM; 3444 3445 /* If absent this value will be obtained from h/w. */ 3446 of_property_read_u32(np, "dma-channels", &num_phy); 3447 if (num_phy > 0) 3448 pdata->num_of_phy_chans = num_phy; 3449 3450 list = of_get_property(np, "memcpy-channels", &num_memcpy); 3451 num_memcpy /= sizeof(*list); 3452 3453 if (num_memcpy > D40_MEMCPY_MAX_CHANS || num_memcpy <= 0) { 3454 d40_err(&pdev->dev, 3455 "Invalid number of memcpy channels specified (%d)\n", 3456 num_memcpy); 3457 return -EINVAL; 3458 } 3459 pdata->num_of_memcpy_chans = num_memcpy; 3460 3461 of_property_read_u32_array(np, "memcpy-channels", 3462 dma40_memcpy_channels, 3463 num_memcpy); 3464 3465 list = of_get_property(np, "disabled-channels", &num_disabled); 3466 num_disabled /= sizeof(*list); 3467 3468 if (num_disabled >= STEDMA40_MAX_PHYS || num_disabled < 0) { 3469 d40_err(&pdev->dev, 3470 "Invalid number of disabled channels specified (%d)\n", 3471 num_disabled); 3472 return -EINVAL; 3473 } 3474 3475 of_property_read_u32_array(np, "disabled-channels", 3476 pdata->disabled_channels, 3477 num_disabled); 3478 pdata->disabled_channels[num_disabled] = -1; 3479 3480 pdev->dev.platform_data = pdata; 3481 3482 return 0; 3483 } 3484 3485 static int __init d40_probe(struct platform_device *pdev) 3486 { 3487 struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev); 3488 struct device_node *np = pdev->dev.of_node; 3489 int ret = -ENOENT; 3490 struct d40_base *base; 3491 struct resource *res; 3492 int num_reserved_chans; 3493 u32 val; 3494 3495 if (!plat_data) { 3496 if (np) { 3497 if (d40_of_probe(pdev, np)) { 3498 ret = -ENOMEM; 3499 goto report_failure; 3500 } 3501 } else { 3502 d40_err(&pdev->dev, "No pdata or Device Tree provided\n"); 3503 goto report_failure; 3504 } 3505 } 3506 3507 base = d40_hw_detect_init(pdev); 3508 if (!base) 3509 goto report_failure; 3510 3511 num_reserved_chans = d40_phy_res_init(base); 3512 3513 platform_set_drvdata(pdev, base); 3514 3515 spin_lock_init(&base->interrupt_lock); 3516 spin_lock_init(&base->execmd_lock); 3517 3518 /* Get IO for logical channel parameter address */ 3519 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lcpa"); 3520 if (!res) { 3521 ret = -ENOENT; 3522 d40_err(&pdev->dev, "No \"lcpa\" memory resource\n"); 3523 goto destroy_cache; 3524 } 3525 base->lcpa_size = resource_size(res); 3526 base->phy_lcpa = res->start; 3527 3528 if (request_mem_region(res->start, resource_size(res), 3529 D40_NAME " I/O lcpa") == NULL) { 3530 ret = -EBUSY; 3531 d40_err(&pdev->dev, "Failed to request LCPA region %pR\n", res); 3532 goto destroy_cache; 3533 } 3534 3535 /* We make use of ESRAM memory for this. */ 3536 val = readl(base->virtbase + D40_DREG_LCPA); 3537 if (res->start != val && val != 0) { 3538 dev_warn(&pdev->dev, 3539 "[%s] Mismatch LCPA dma 0x%x, def %pa\n", 3540 __func__, val, &res->start); 3541 } else 3542 writel(res->start, base->virtbase + D40_DREG_LCPA); 3543 3544 base->lcpa_base = ioremap(res->start, resource_size(res)); 3545 if (!base->lcpa_base) { 3546 ret = -ENOMEM; 3547 d40_err(&pdev->dev, "Failed to ioremap LCPA region\n"); 3548 goto destroy_cache; 3549 } 3550 /* If lcla has to be located in ESRAM we don't need to allocate */ 3551 if (base->plat_data->use_esram_lcla) { 3552 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, 3553 "lcla_esram"); 3554 if (!res) { 3555 ret = -ENOENT; 3556 d40_err(&pdev->dev, 3557 "No \"lcla_esram\" memory resource\n"); 3558 goto destroy_cache; 3559 } 3560 base->lcla_pool.base = ioremap(res->start, 3561 resource_size(res)); 3562 if (!base->lcla_pool.base) { 3563 ret = -ENOMEM; 3564 d40_err(&pdev->dev, "Failed to ioremap LCLA region\n"); 3565 goto destroy_cache; 3566 } 3567 writel(res->start, base->virtbase + D40_DREG_LCLA); 3568 3569 } else { 3570 ret = d40_lcla_allocate(base); 3571 if (ret) { 3572 d40_err(&pdev->dev, "Failed to allocate LCLA area\n"); 3573 goto destroy_cache; 3574 } 3575 } 3576 3577 spin_lock_init(&base->lcla_pool.lock); 3578 3579 base->irq = platform_get_irq(pdev, 0); 3580 3581 ret = request_irq(base->irq, d40_handle_interrupt, 0, D40_NAME, base); 3582 if (ret) { 3583 d40_err(&pdev->dev, "No IRQ defined\n"); 3584 goto destroy_cache; 3585 } 3586 3587 if (base->plat_data->use_esram_lcla) { 3588 3589 base->lcpa_regulator = regulator_get(base->dev, "lcla_esram"); 3590 if (IS_ERR(base->lcpa_regulator)) { 3591 d40_err(&pdev->dev, "Failed to get lcpa_regulator\n"); 3592 ret = PTR_ERR(base->lcpa_regulator); 3593 base->lcpa_regulator = NULL; 3594 goto destroy_cache; 3595 } 3596 3597 ret = regulator_enable(base->lcpa_regulator); 3598 if (ret) { 3599 d40_err(&pdev->dev, 3600 "Failed to enable lcpa_regulator\n"); 3601 regulator_put(base->lcpa_regulator); 3602 base->lcpa_regulator = NULL; 3603 goto destroy_cache; 3604 } 3605 } 3606 3607 writel_relaxed(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC); 3608 3609 pm_runtime_irq_safe(base->dev); 3610 pm_runtime_set_autosuspend_delay(base->dev, DMA40_AUTOSUSPEND_DELAY); 3611 pm_runtime_use_autosuspend(base->dev); 3612 pm_runtime_mark_last_busy(base->dev); 3613 pm_runtime_set_active(base->dev); 3614 pm_runtime_enable(base->dev); 3615 3616 ret = d40_dmaengine_init(base, num_reserved_chans); 3617 if (ret) 3618 goto destroy_cache; 3619 3620 base->dev->dma_parms = &base->dma_parms; 3621 ret = dma_set_max_seg_size(base->dev, STEDMA40_MAX_SEG_SIZE); 3622 if (ret) { 3623 d40_err(&pdev->dev, "Failed to set dma max seg size\n"); 3624 goto destroy_cache; 3625 } 3626 3627 d40_hw_init(base); 3628 3629 if (np) { 3630 ret = of_dma_controller_register(np, d40_xlate, NULL); 3631 if (ret) 3632 dev_err(&pdev->dev, 3633 "could not register of_dma_controller\n"); 3634 } 3635 3636 dev_info(base->dev, "initialized\n"); 3637 return 0; 3638 destroy_cache: 3639 kmem_cache_destroy(base->desc_slab); 3640 if (base->virtbase) 3641 iounmap(base->virtbase); 3642 3643 if (base->lcla_pool.base && base->plat_data->use_esram_lcla) { 3644 iounmap(base->lcla_pool.base); 3645 base->lcla_pool.base = NULL; 3646 } 3647 3648 if (base->lcla_pool.dma_addr) 3649 dma_unmap_single(base->dev, base->lcla_pool.dma_addr, 3650 SZ_1K * base->num_phy_chans, 3651 DMA_TO_DEVICE); 3652 3653 if (!base->lcla_pool.base_unaligned && base->lcla_pool.base) 3654 free_pages((unsigned long)base->lcla_pool.base, 3655 base->lcla_pool.pages); 3656 3657 kfree(base->lcla_pool.base_unaligned); 3658 3659 if (base->phy_lcpa) 3660 release_mem_region(base->phy_lcpa, 3661 base->lcpa_size); 3662 if (base->phy_start) 3663 release_mem_region(base->phy_start, 3664 base->phy_size); 3665 if (base->clk) { 3666 clk_disable_unprepare(base->clk); 3667 clk_put(base->clk); 3668 } 3669 3670 if (base->lcpa_regulator) { 3671 regulator_disable(base->lcpa_regulator); 3672 regulator_put(base->lcpa_regulator); 3673 } 3674 3675 kfree(base->lcla_pool.alloc_map); 3676 kfree(base->lookup_log_chans); 3677 kfree(base->lookup_phy_chans); 3678 kfree(base->phy_res); 3679 kfree(base); 3680 report_failure: 3681 d40_err(&pdev->dev, "probe failed\n"); 3682 return ret; 3683 } 3684 3685 static const struct of_device_id d40_match[] = { 3686 { .compatible = "stericsson,dma40", }, 3687 {} 3688 }; 3689 3690 static struct platform_driver d40_driver = { 3691 .driver = { 3692 .name = D40_NAME, 3693 .pm = &dma40_pm_ops, 3694 .of_match_table = d40_match, 3695 }, 3696 }; 3697 3698 static int __init stedma40_init(void) 3699 { 3700 return platform_driver_probe(&d40_driver, d40_probe); 3701 } 3702 subsys_initcall(stedma40_init); 3703