1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) Ericsson AB 2007-2008 4 * Copyright (C) ST-Ericsson SA 2008-2010 5 * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson 6 * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson 7 */ 8 9 #include <linux/dma-mapping.h> 10 #include <linux/kernel.h> 11 #include <linux/slab.h> 12 #include <linux/export.h> 13 #include <linux/dmaengine.h> 14 #include <linux/platform_device.h> 15 #include <linux/clk.h> 16 #include <linux/delay.h> 17 #include <linux/log2.h> 18 #include <linux/pm.h> 19 #include <linux/pm_runtime.h> 20 #include <linux/err.h> 21 #include <linux/of.h> 22 #include <linux/of_dma.h> 23 #include <linux/amba/bus.h> 24 #include <linux/regulator/consumer.h> 25 #include <linux/platform_data/dma-ste-dma40.h> 26 27 #include "dmaengine.h" 28 #include "ste_dma40_ll.h" 29 30 #define D40_NAME "dma40" 31 32 #define D40_PHY_CHAN -1 33 34 /* For masking out/in 2 bit channel positions */ 35 #define D40_CHAN_POS(chan) (2 * (chan / 2)) 36 #define D40_CHAN_POS_MASK(chan) (0x3 << D40_CHAN_POS(chan)) 37 38 /* Maximum iterations taken before giving up suspending a channel */ 39 #define D40_SUSPEND_MAX_IT 500 40 41 /* Milliseconds */ 42 #define DMA40_AUTOSUSPEND_DELAY 100 43 44 /* Hardware requirement on LCLA alignment */ 45 #define LCLA_ALIGNMENT 0x40000 46 47 /* Max number of links per event group */ 48 #define D40_LCLA_LINK_PER_EVENT_GRP 128 49 #define D40_LCLA_END D40_LCLA_LINK_PER_EVENT_GRP 50 51 /* Max number of logical channels per physical channel */ 52 #define D40_MAX_LOG_CHAN_PER_PHY 32 53 54 /* Attempts before giving up to trying to get pages that are aligned */ 55 #define MAX_LCLA_ALLOC_ATTEMPTS 256 56 57 /* Bit markings for allocation map */ 58 #define D40_ALLOC_FREE BIT(31) 59 #define D40_ALLOC_PHY BIT(30) 60 #define D40_ALLOC_LOG_FREE 0 61 62 #define D40_MEMCPY_MAX_CHANS 8 63 64 /* Reserved event lines for memcpy only. */ 65 #define DB8500_DMA_MEMCPY_EV_0 51 66 #define DB8500_DMA_MEMCPY_EV_1 56 67 #define DB8500_DMA_MEMCPY_EV_2 57 68 #define DB8500_DMA_MEMCPY_EV_3 58 69 #define DB8500_DMA_MEMCPY_EV_4 59 70 #define DB8500_DMA_MEMCPY_EV_5 60 71 72 static int dma40_memcpy_channels[] = { 73 DB8500_DMA_MEMCPY_EV_0, 74 DB8500_DMA_MEMCPY_EV_1, 75 DB8500_DMA_MEMCPY_EV_2, 76 DB8500_DMA_MEMCPY_EV_3, 77 DB8500_DMA_MEMCPY_EV_4, 78 DB8500_DMA_MEMCPY_EV_5, 79 }; 80 81 /* Default configuration for physcial memcpy */ 82 static const struct stedma40_chan_cfg dma40_memcpy_conf_phy = { 83 .mode = STEDMA40_MODE_PHYSICAL, 84 .dir = DMA_MEM_TO_MEM, 85 86 .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, 87 .src_info.psize = STEDMA40_PSIZE_PHY_1, 88 .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, 89 90 .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, 91 .dst_info.psize = STEDMA40_PSIZE_PHY_1, 92 .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, 93 }; 94 95 /* Default configuration for logical memcpy */ 96 static const struct stedma40_chan_cfg dma40_memcpy_conf_log = { 97 .mode = STEDMA40_MODE_LOGICAL, 98 .dir = DMA_MEM_TO_MEM, 99 100 .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, 101 .src_info.psize = STEDMA40_PSIZE_LOG_1, 102 .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, 103 104 .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, 105 .dst_info.psize = STEDMA40_PSIZE_LOG_1, 106 .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, 107 }; 108 109 /** 110 * enum 40_command - The different commands and/or statuses. 111 * 112 * @D40_DMA_STOP: DMA channel command STOP or status STOPPED, 113 * @D40_DMA_RUN: The DMA channel is RUNNING of the command RUN. 114 * @D40_DMA_SUSPEND_REQ: Request the DMA to SUSPEND as soon as possible. 115 * @D40_DMA_SUSPENDED: The DMA channel is SUSPENDED. 116 */ 117 enum d40_command { 118 D40_DMA_STOP = 0, 119 D40_DMA_RUN = 1, 120 D40_DMA_SUSPEND_REQ = 2, 121 D40_DMA_SUSPENDED = 3 122 }; 123 124 /* 125 * enum d40_events - The different Event Enables for the event lines. 126 * 127 * @D40_DEACTIVATE_EVENTLINE: De-activate Event line, stopping the logical chan. 128 * @D40_ACTIVATE_EVENTLINE: Activate the Event line, to start a logical chan. 129 * @D40_SUSPEND_REQ_EVENTLINE: Requesting for suspending a event line. 130 * @D40_ROUND_EVENTLINE: Status check for event line. 131 */ 132 133 enum d40_events { 134 D40_DEACTIVATE_EVENTLINE = 0, 135 D40_ACTIVATE_EVENTLINE = 1, 136 D40_SUSPEND_REQ_EVENTLINE = 2, 137 D40_ROUND_EVENTLINE = 3 138 }; 139 140 /* 141 * These are the registers that has to be saved and later restored 142 * when the DMA hw is powered off. 143 * TODO: Add save/restore of D40_DREG_GCC on dma40 v3 or later, if that works. 144 */ 145 static u32 d40_backup_regs[] = { 146 D40_DREG_LCPA, 147 D40_DREG_LCLA, 148 D40_DREG_PRMSE, 149 D40_DREG_PRMSO, 150 D40_DREG_PRMOE, 151 D40_DREG_PRMOO, 152 }; 153 154 #define BACKUP_REGS_SZ ARRAY_SIZE(d40_backup_regs) 155 156 /* 157 * since 9540 and 8540 has the same HW revision 158 * use v4a for 9540 or ealier 159 * use v4b for 8540 or later 160 * HW revision: 161 * DB8500ed has revision 0 162 * DB8500v1 has revision 2 163 * DB8500v2 has revision 3 164 * AP9540v1 has revision 4 165 * DB8540v1 has revision 4 166 * TODO: Check if all these registers have to be saved/restored on dma40 v4a 167 */ 168 static u32 d40_backup_regs_v4a[] = { 169 D40_DREG_PSEG1, 170 D40_DREG_PSEG2, 171 D40_DREG_PSEG3, 172 D40_DREG_PSEG4, 173 D40_DREG_PCEG1, 174 D40_DREG_PCEG2, 175 D40_DREG_PCEG3, 176 D40_DREG_PCEG4, 177 D40_DREG_RSEG1, 178 D40_DREG_RSEG2, 179 D40_DREG_RSEG3, 180 D40_DREG_RSEG4, 181 D40_DREG_RCEG1, 182 D40_DREG_RCEG2, 183 D40_DREG_RCEG3, 184 D40_DREG_RCEG4, 185 }; 186 187 #define BACKUP_REGS_SZ_V4A ARRAY_SIZE(d40_backup_regs_v4a) 188 189 static u32 d40_backup_regs_v4b[] = { 190 D40_DREG_CPSEG1, 191 D40_DREG_CPSEG2, 192 D40_DREG_CPSEG3, 193 D40_DREG_CPSEG4, 194 D40_DREG_CPSEG5, 195 D40_DREG_CPCEG1, 196 D40_DREG_CPCEG2, 197 D40_DREG_CPCEG3, 198 D40_DREG_CPCEG4, 199 D40_DREG_CPCEG5, 200 D40_DREG_CRSEG1, 201 D40_DREG_CRSEG2, 202 D40_DREG_CRSEG3, 203 D40_DREG_CRSEG4, 204 D40_DREG_CRSEG5, 205 D40_DREG_CRCEG1, 206 D40_DREG_CRCEG2, 207 D40_DREG_CRCEG3, 208 D40_DREG_CRCEG4, 209 D40_DREG_CRCEG5, 210 }; 211 212 #define BACKUP_REGS_SZ_V4B ARRAY_SIZE(d40_backup_regs_v4b) 213 214 static u32 d40_backup_regs_chan[] = { 215 D40_CHAN_REG_SSCFG, 216 D40_CHAN_REG_SSELT, 217 D40_CHAN_REG_SSPTR, 218 D40_CHAN_REG_SSLNK, 219 D40_CHAN_REG_SDCFG, 220 D40_CHAN_REG_SDELT, 221 D40_CHAN_REG_SDPTR, 222 D40_CHAN_REG_SDLNK, 223 }; 224 225 #define BACKUP_REGS_SZ_MAX ((BACKUP_REGS_SZ_V4A > BACKUP_REGS_SZ_V4B) ? \ 226 BACKUP_REGS_SZ_V4A : BACKUP_REGS_SZ_V4B) 227 228 /** 229 * struct d40_interrupt_lookup - lookup table for interrupt handler 230 * 231 * @src: Interrupt mask register. 232 * @clr: Interrupt clear register. 233 * @is_error: true if this is an error interrupt. 234 * @offset: start delta in the lookup_log_chans in d40_base. If equals to 235 * D40_PHY_CHAN, the lookup_phy_chans shall be used instead. 236 */ 237 struct d40_interrupt_lookup { 238 u32 src; 239 u32 clr; 240 bool is_error; 241 int offset; 242 }; 243 244 245 static struct d40_interrupt_lookup il_v4a[] = { 246 {D40_DREG_LCTIS0, D40_DREG_LCICR0, false, 0}, 247 {D40_DREG_LCTIS1, D40_DREG_LCICR1, false, 32}, 248 {D40_DREG_LCTIS2, D40_DREG_LCICR2, false, 64}, 249 {D40_DREG_LCTIS3, D40_DREG_LCICR3, false, 96}, 250 {D40_DREG_LCEIS0, D40_DREG_LCICR0, true, 0}, 251 {D40_DREG_LCEIS1, D40_DREG_LCICR1, true, 32}, 252 {D40_DREG_LCEIS2, D40_DREG_LCICR2, true, 64}, 253 {D40_DREG_LCEIS3, D40_DREG_LCICR3, true, 96}, 254 {D40_DREG_PCTIS, D40_DREG_PCICR, false, D40_PHY_CHAN}, 255 {D40_DREG_PCEIS, D40_DREG_PCICR, true, D40_PHY_CHAN}, 256 }; 257 258 static struct d40_interrupt_lookup il_v4b[] = { 259 {D40_DREG_CLCTIS1, D40_DREG_CLCICR1, false, 0}, 260 {D40_DREG_CLCTIS2, D40_DREG_CLCICR2, false, 32}, 261 {D40_DREG_CLCTIS3, D40_DREG_CLCICR3, false, 64}, 262 {D40_DREG_CLCTIS4, D40_DREG_CLCICR4, false, 96}, 263 {D40_DREG_CLCTIS5, D40_DREG_CLCICR5, false, 128}, 264 {D40_DREG_CLCEIS1, D40_DREG_CLCICR1, true, 0}, 265 {D40_DREG_CLCEIS2, D40_DREG_CLCICR2, true, 32}, 266 {D40_DREG_CLCEIS3, D40_DREG_CLCICR3, true, 64}, 267 {D40_DREG_CLCEIS4, D40_DREG_CLCICR4, true, 96}, 268 {D40_DREG_CLCEIS5, D40_DREG_CLCICR5, true, 128}, 269 {D40_DREG_CPCTIS, D40_DREG_CPCICR, false, D40_PHY_CHAN}, 270 {D40_DREG_CPCEIS, D40_DREG_CPCICR, true, D40_PHY_CHAN}, 271 }; 272 273 /** 274 * struct d40_reg_val - simple lookup struct 275 * 276 * @reg: The register. 277 * @val: The value that belongs to the register in reg. 278 */ 279 struct d40_reg_val { 280 unsigned int reg; 281 unsigned int val; 282 }; 283 284 static __initdata struct d40_reg_val dma_init_reg_v4a[] = { 285 /* Clock every part of the DMA block from start */ 286 { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL}, 287 288 /* Interrupts on all logical channels */ 289 { .reg = D40_DREG_LCMIS0, .val = 0xFFFFFFFF}, 290 { .reg = D40_DREG_LCMIS1, .val = 0xFFFFFFFF}, 291 { .reg = D40_DREG_LCMIS2, .val = 0xFFFFFFFF}, 292 { .reg = D40_DREG_LCMIS3, .val = 0xFFFFFFFF}, 293 { .reg = D40_DREG_LCICR0, .val = 0xFFFFFFFF}, 294 { .reg = D40_DREG_LCICR1, .val = 0xFFFFFFFF}, 295 { .reg = D40_DREG_LCICR2, .val = 0xFFFFFFFF}, 296 { .reg = D40_DREG_LCICR3, .val = 0xFFFFFFFF}, 297 { .reg = D40_DREG_LCTIS0, .val = 0xFFFFFFFF}, 298 { .reg = D40_DREG_LCTIS1, .val = 0xFFFFFFFF}, 299 { .reg = D40_DREG_LCTIS2, .val = 0xFFFFFFFF}, 300 { .reg = D40_DREG_LCTIS3, .val = 0xFFFFFFFF} 301 }; 302 static __initdata struct d40_reg_val dma_init_reg_v4b[] = { 303 /* Clock every part of the DMA block from start */ 304 { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL}, 305 306 /* Interrupts on all logical channels */ 307 { .reg = D40_DREG_CLCMIS1, .val = 0xFFFFFFFF}, 308 { .reg = D40_DREG_CLCMIS2, .val = 0xFFFFFFFF}, 309 { .reg = D40_DREG_CLCMIS3, .val = 0xFFFFFFFF}, 310 { .reg = D40_DREG_CLCMIS4, .val = 0xFFFFFFFF}, 311 { .reg = D40_DREG_CLCMIS5, .val = 0xFFFFFFFF}, 312 { .reg = D40_DREG_CLCICR1, .val = 0xFFFFFFFF}, 313 { .reg = D40_DREG_CLCICR2, .val = 0xFFFFFFFF}, 314 { .reg = D40_DREG_CLCICR3, .val = 0xFFFFFFFF}, 315 { .reg = D40_DREG_CLCICR4, .val = 0xFFFFFFFF}, 316 { .reg = D40_DREG_CLCICR5, .val = 0xFFFFFFFF}, 317 { .reg = D40_DREG_CLCTIS1, .val = 0xFFFFFFFF}, 318 { .reg = D40_DREG_CLCTIS2, .val = 0xFFFFFFFF}, 319 { .reg = D40_DREG_CLCTIS3, .val = 0xFFFFFFFF}, 320 { .reg = D40_DREG_CLCTIS4, .val = 0xFFFFFFFF}, 321 { .reg = D40_DREG_CLCTIS5, .val = 0xFFFFFFFF} 322 }; 323 324 /** 325 * struct d40_lli_pool - Structure for keeping LLIs in memory 326 * 327 * @base: Pointer to memory area when the pre_alloc_lli's are not large 328 * enough, IE bigger than the most common case, 1 dst and 1 src. NULL if 329 * pre_alloc_lli is used. 330 * @dma_addr: DMA address, if mapped 331 * @size: The size in bytes of the memory at base or the size of pre_alloc_lli. 332 * @pre_alloc_lli: Pre allocated area for the most common case of transfers, 333 * one buffer to one buffer. 334 */ 335 struct d40_lli_pool { 336 void *base; 337 int size; 338 dma_addr_t dma_addr; 339 /* Space for dst and src, plus an extra for padding */ 340 u8 pre_alloc_lli[3 * sizeof(struct d40_phy_lli)]; 341 }; 342 343 /** 344 * struct d40_desc - A descriptor is one DMA job. 345 * 346 * @lli_phy: LLI settings for physical channel. Both src and dst= 347 * points into the lli_pool, to base if lli_len > 1 or to pre_alloc_lli if 348 * lli_len equals one. 349 * @lli_log: Same as above but for logical channels. 350 * @lli_pool: The pool with two entries pre-allocated. 351 * @lli_len: Number of llis of current descriptor. 352 * @lli_current: Number of transferred llis. 353 * @lcla_alloc: Number of LCLA entries allocated. 354 * @txd: DMA engine struct. Used for among other things for communication 355 * during a transfer. 356 * @node: List entry. 357 * @is_in_client_list: true if the client owns this descriptor. 358 * @cyclic: true if this is a cyclic job 359 * 360 * This descriptor is used for both logical and physical transfers. 361 */ 362 struct d40_desc { 363 /* LLI physical */ 364 struct d40_phy_lli_bidir lli_phy; 365 /* LLI logical */ 366 struct d40_log_lli_bidir lli_log; 367 368 struct d40_lli_pool lli_pool; 369 int lli_len; 370 int lli_current; 371 int lcla_alloc; 372 373 struct dma_async_tx_descriptor txd; 374 struct list_head node; 375 376 bool is_in_client_list; 377 bool cyclic; 378 }; 379 380 /** 381 * struct d40_lcla_pool - LCLA pool settings and data. 382 * 383 * @base: The virtual address of LCLA. 18 bit aligned. 384 * @base_unaligned: The orignal kmalloc pointer, if kmalloc is used. 385 * This pointer is only there for clean-up on error. 386 * @pages: The number of pages needed for all physical channels. 387 * Only used later for clean-up on error 388 * @lock: Lock to protect the content in this struct. 389 * @alloc_map: big map over which LCLA entry is own by which job. 390 */ 391 struct d40_lcla_pool { 392 void *base; 393 dma_addr_t dma_addr; 394 void *base_unaligned; 395 int pages; 396 spinlock_t lock; 397 struct d40_desc **alloc_map; 398 }; 399 400 /** 401 * struct d40_phy_res - struct for handling eventlines mapped to physical 402 * channels. 403 * 404 * @lock: A lock protection this entity. 405 * @reserved: True if used by secure world or otherwise. 406 * @num: The physical channel number of this entity. 407 * @allocated_src: Bit mapped to show which src event line's are mapped to 408 * this physical channel. Can also be free or physically allocated. 409 * @allocated_dst: Same as for src but is dst. 410 * allocated_dst and allocated_src uses the D40_ALLOC* defines as well as 411 * event line number. 412 * @use_soft_lli: To mark if the linked lists of channel are managed by SW. 413 */ 414 struct d40_phy_res { 415 spinlock_t lock; 416 bool reserved; 417 int num; 418 u32 allocated_src; 419 u32 allocated_dst; 420 bool use_soft_lli; 421 }; 422 423 struct d40_base; 424 425 /** 426 * struct d40_chan - Struct that describes a channel. 427 * 428 * @lock: A spinlock to protect this struct. 429 * @log_num: The logical number, if any of this channel. 430 * @pending_tx: The number of pending transfers. Used between interrupt handler 431 * and tasklet. 432 * @busy: Set to true when transfer is ongoing on this channel. 433 * @phy_chan: Pointer to physical channel which this instance runs on. If this 434 * point is NULL, then the channel is not allocated. 435 * @chan: DMA engine handle. 436 * @tasklet: Tasklet that gets scheduled from interrupt context to complete a 437 * transfer and call client callback. 438 * @client: Cliented owned descriptor list. 439 * @pending_queue: Submitted jobs, to be issued by issue_pending() 440 * @active: Active descriptor. 441 * @done: Completed jobs 442 * @queue: Queued jobs. 443 * @prepare_queue: Prepared jobs. 444 * @dma_cfg: The client configuration of this dma channel. 445 * @slave_config: DMA slave configuration. 446 * @configured: whether the dma_cfg configuration is valid 447 * @base: Pointer to the device instance struct. 448 * @src_def_cfg: Default cfg register setting for src. 449 * @dst_def_cfg: Default cfg register setting for dst. 450 * @log_def: Default logical channel settings. 451 * @lcpa: Pointer to dst and src lcpa settings. 452 * @runtime_addr: runtime configured address. 453 * @runtime_direction: runtime configured direction. 454 * 455 * This struct can either "be" a logical or a physical channel. 456 */ 457 struct d40_chan { 458 spinlock_t lock; 459 int log_num; 460 int pending_tx; 461 bool busy; 462 struct d40_phy_res *phy_chan; 463 struct dma_chan chan; 464 struct tasklet_struct tasklet; 465 struct list_head client; 466 struct list_head pending_queue; 467 struct list_head active; 468 struct list_head done; 469 struct list_head queue; 470 struct list_head prepare_queue; 471 struct stedma40_chan_cfg dma_cfg; 472 struct dma_slave_config slave_config; 473 bool configured; 474 struct d40_base *base; 475 /* Default register configurations */ 476 u32 src_def_cfg; 477 u32 dst_def_cfg; 478 struct d40_def_lcsp log_def; 479 struct d40_log_lli_full *lcpa; 480 /* Runtime reconfiguration */ 481 dma_addr_t runtime_addr; 482 enum dma_transfer_direction runtime_direction; 483 }; 484 485 /** 486 * struct d40_gen_dmac - generic values to represent u8500/u8540 DMA 487 * controller 488 * 489 * @backup: the pointer to the registers address array for backup 490 * @backup_size: the size of the registers address array for backup 491 * @realtime_en: the realtime enable register 492 * @realtime_clear: the realtime clear register 493 * @high_prio_en: the high priority enable register 494 * @high_prio_clear: the high priority clear register 495 * @interrupt_en: the interrupt enable register 496 * @interrupt_clear: the interrupt clear register 497 * @il: the pointer to struct d40_interrupt_lookup 498 * @il_size: the size of d40_interrupt_lookup array 499 * @init_reg: the pointer to the struct d40_reg_val 500 * @init_reg_size: the size of d40_reg_val array 501 */ 502 struct d40_gen_dmac { 503 u32 *backup; 504 u32 backup_size; 505 u32 realtime_en; 506 u32 realtime_clear; 507 u32 high_prio_en; 508 u32 high_prio_clear; 509 u32 interrupt_en; 510 u32 interrupt_clear; 511 struct d40_interrupt_lookup *il; 512 u32 il_size; 513 struct d40_reg_val *init_reg; 514 u32 init_reg_size; 515 }; 516 517 /** 518 * struct d40_base - The big global struct, one for each probe'd instance. 519 * 520 * @interrupt_lock: Lock used to make sure one interrupt is handle a time. 521 * @execmd_lock: Lock for execute command usage since several channels share 522 * the same physical register. 523 * @dev: The device structure. 524 * @virtbase: The virtual base address of the DMA's register. 525 * @rev: silicon revision detected. 526 * @clk: Pointer to the DMA clock structure. 527 * @phy_start: Physical memory start of the DMA registers. 528 * @phy_size: Size of the DMA register map. 529 * @irq: The IRQ number. 530 * @num_memcpy_chans: The number of channels used for memcpy (mem-to-mem 531 * transfers). 532 * @num_phy_chans: The number of physical channels. Read from HW. This 533 * is the number of available channels for this driver, not counting "Secure 534 * mode" allocated physical channels. 535 * @num_log_chans: The number of logical channels. Calculated from 536 * num_phy_chans. 537 * @dma_both: dma_device channels that can do both memcpy and slave transfers. 538 * @dma_slave: dma_device channels that can do only do slave transfers. 539 * @dma_memcpy: dma_device channels that can do only do memcpy transfers. 540 * @phy_chans: Room for all possible physical channels in system. 541 * @log_chans: Room for all possible logical channels in system. 542 * @lookup_log_chans: Used to map interrupt number to logical channel. Points 543 * to log_chans entries. 544 * @lookup_phy_chans: Used to map interrupt number to physical channel. Points 545 * to phy_chans entries. 546 * @plat_data: Pointer to provided platform_data which is the driver 547 * configuration. 548 * @lcpa_regulator: Pointer to hold the regulator for the esram bank for lcla. 549 * @phy_res: Vector containing all physical channels. 550 * @lcla_pool: lcla pool settings and data. 551 * @lcpa_base: The virtual mapped address of LCPA. 552 * @phy_lcpa: The physical address of the LCPA. 553 * @lcpa_size: The size of the LCPA area. 554 * @desc_slab: cache for descriptors. 555 * @reg_val_backup: Here the values of some hardware registers are stored 556 * before the DMA is powered off. They are restored when the power is back on. 557 * @reg_val_backup_v4: Backup of registers that only exits on dma40 v3 and 558 * later 559 * @reg_val_backup_chan: Backup data for standard channel parameter registers. 560 * @regs_interrupt: Scratch space for registers during interrupt. 561 * @gcc_pwr_off_mask: Mask to maintain the channels that can be turned off. 562 * @gen_dmac: the struct for generic registers values to represent u8500/8540 563 * DMA controller 564 */ 565 struct d40_base { 566 spinlock_t interrupt_lock; 567 spinlock_t execmd_lock; 568 struct device *dev; 569 void __iomem *virtbase; 570 u8 rev:4; 571 struct clk *clk; 572 phys_addr_t phy_start; 573 resource_size_t phy_size; 574 int irq; 575 int num_memcpy_chans; 576 int num_phy_chans; 577 int num_log_chans; 578 struct device_dma_parameters dma_parms; 579 struct dma_device dma_both; 580 struct dma_device dma_slave; 581 struct dma_device dma_memcpy; 582 struct d40_chan *phy_chans; 583 struct d40_chan *log_chans; 584 struct d40_chan **lookup_log_chans; 585 struct d40_chan **lookup_phy_chans; 586 struct stedma40_platform_data *plat_data; 587 struct regulator *lcpa_regulator; 588 /* Physical half channels */ 589 struct d40_phy_res *phy_res; 590 struct d40_lcla_pool lcla_pool; 591 void *lcpa_base; 592 dma_addr_t phy_lcpa; 593 resource_size_t lcpa_size; 594 struct kmem_cache *desc_slab; 595 u32 reg_val_backup[BACKUP_REGS_SZ]; 596 u32 reg_val_backup_v4[BACKUP_REGS_SZ_MAX]; 597 u32 *reg_val_backup_chan; 598 u32 *regs_interrupt; 599 u16 gcc_pwr_off_mask; 600 struct d40_gen_dmac gen_dmac; 601 }; 602 603 static struct device *chan2dev(struct d40_chan *d40c) 604 { 605 return &d40c->chan.dev->device; 606 } 607 608 static bool chan_is_physical(struct d40_chan *chan) 609 { 610 return chan->log_num == D40_PHY_CHAN; 611 } 612 613 static bool chan_is_logical(struct d40_chan *chan) 614 { 615 return !chan_is_physical(chan); 616 } 617 618 static void __iomem *chan_base(struct d40_chan *chan) 619 { 620 return chan->base->virtbase + D40_DREG_PCBASE + 621 chan->phy_chan->num * D40_DREG_PCDELTA; 622 } 623 624 #define d40_err(dev, format, arg...) \ 625 dev_err(dev, "[%s] " format, __func__, ## arg) 626 627 #define chan_err(d40c, format, arg...) \ 628 d40_err(chan2dev(d40c), format, ## arg) 629 630 static int d40_set_runtime_config_write(struct dma_chan *chan, 631 struct dma_slave_config *config, 632 enum dma_transfer_direction direction); 633 634 static int d40_pool_lli_alloc(struct d40_chan *d40c, struct d40_desc *d40d, 635 int lli_len) 636 { 637 bool is_log = chan_is_logical(d40c); 638 u32 align; 639 void *base; 640 641 if (is_log) 642 align = sizeof(struct d40_log_lli); 643 else 644 align = sizeof(struct d40_phy_lli); 645 646 if (lli_len == 1) { 647 base = d40d->lli_pool.pre_alloc_lli; 648 d40d->lli_pool.size = sizeof(d40d->lli_pool.pre_alloc_lli); 649 d40d->lli_pool.base = NULL; 650 } else { 651 d40d->lli_pool.size = lli_len * 2 * align; 652 653 base = kmalloc(d40d->lli_pool.size + align, GFP_NOWAIT); 654 d40d->lli_pool.base = base; 655 656 if (d40d->lli_pool.base == NULL) 657 return -ENOMEM; 658 } 659 660 if (is_log) { 661 d40d->lli_log.src = PTR_ALIGN(base, align); 662 d40d->lli_log.dst = d40d->lli_log.src + lli_len; 663 664 d40d->lli_pool.dma_addr = 0; 665 } else { 666 d40d->lli_phy.src = PTR_ALIGN(base, align); 667 d40d->lli_phy.dst = d40d->lli_phy.src + lli_len; 668 669 d40d->lli_pool.dma_addr = dma_map_single(d40c->base->dev, 670 d40d->lli_phy.src, 671 d40d->lli_pool.size, 672 DMA_TO_DEVICE); 673 674 if (dma_mapping_error(d40c->base->dev, 675 d40d->lli_pool.dma_addr)) { 676 kfree(d40d->lli_pool.base); 677 d40d->lli_pool.base = NULL; 678 d40d->lli_pool.dma_addr = 0; 679 return -ENOMEM; 680 } 681 } 682 683 return 0; 684 } 685 686 static void d40_pool_lli_free(struct d40_chan *d40c, struct d40_desc *d40d) 687 { 688 if (d40d->lli_pool.dma_addr) 689 dma_unmap_single(d40c->base->dev, d40d->lli_pool.dma_addr, 690 d40d->lli_pool.size, DMA_TO_DEVICE); 691 692 kfree(d40d->lli_pool.base); 693 d40d->lli_pool.base = NULL; 694 d40d->lli_pool.size = 0; 695 d40d->lli_log.src = NULL; 696 d40d->lli_log.dst = NULL; 697 d40d->lli_phy.src = NULL; 698 d40d->lli_phy.dst = NULL; 699 } 700 701 static int d40_lcla_alloc_one(struct d40_chan *d40c, 702 struct d40_desc *d40d) 703 { 704 unsigned long flags; 705 int i; 706 int ret = -EINVAL; 707 708 spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags); 709 710 /* 711 * Allocate both src and dst at the same time, therefore the half 712 * start on 1 since 0 can't be used since zero is used as end marker. 713 */ 714 for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) { 715 int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i; 716 717 if (!d40c->base->lcla_pool.alloc_map[idx]) { 718 d40c->base->lcla_pool.alloc_map[idx] = d40d; 719 d40d->lcla_alloc++; 720 ret = i; 721 break; 722 } 723 } 724 725 spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags); 726 727 return ret; 728 } 729 730 static int d40_lcla_free_all(struct d40_chan *d40c, 731 struct d40_desc *d40d) 732 { 733 unsigned long flags; 734 int i; 735 int ret = -EINVAL; 736 737 if (chan_is_physical(d40c)) 738 return 0; 739 740 spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags); 741 742 for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) { 743 int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i; 744 745 if (d40c->base->lcla_pool.alloc_map[idx] == d40d) { 746 d40c->base->lcla_pool.alloc_map[idx] = NULL; 747 d40d->lcla_alloc--; 748 if (d40d->lcla_alloc == 0) { 749 ret = 0; 750 break; 751 } 752 } 753 } 754 755 spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags); 756 757 return ret; 758 759 } 760 761 static void d40_desc_remove(struct d40_desc *d40d) 762 { 763 list_del(&d40d->node); 764 } 765 766 static struct d40_desc *d40_desc_get(struct d40_chan *d40c) 767 { 768 struct d40_desc *desc = NULL; 769 770 if (!list_empty(&d40c->client)) { 771 struct d40_desc *d; 772 struct d40_desc *_d; 773 774 list_for_each_entry_safe(d, _d, &d40c->client, node) { 775 if (async_tx_test_ack(&d->txd)) { 776 d40_desc_remove(d); 777 desc = d; 778 memset(desc, 0, sizeof(*desc)); 779 break; 780 } 781 } 782 } 783 784 if (!desc) 785 desc = kmem_cache_zalloc(d40c->base->desc_slab, GFP_NOWAIT); 786 787 if (desc) 788 INIT_LIST_HEAD(&desc->node); 789 790 return desc; 791 } 792 793 static void d40_desc_free(struct d40_chan *d40c, struct d40_desc *d40d) 794 { 795 796 d40_pool_lli_free(d40c, d40d); 797 d40_lcla_free_all(d40c, d40d); 798 kmem_cache_free(d40c->base->desc_slab, d40d); 799 } 800 801 static void d40_desc_submit(struct d40_chan *d40c, struct d40_desc *desc) 802 { 803 list_add_tail(&desc->node, &d40c->active); 804 } 805 806 static void d40_phy_lli_load(struct d40_chan *chan, struct d40_desc *desc) 807 { 808 struct d40_phy_lli *lli_dst = desc->lli_phy.dst; 809 struct d40_phy_lli *lli_src = desc->lli_phy.src; 810 void __iomem *base = chan_base(chan); 811 812 writel(lli_src->reg_cfg, base + D40_CHAN_REG_SSCFG); 813 writel(lli_src->reg_elt, base + D40_CHAN_REG_SSELT); 814 writel(lli_src->reg_ptr, base + D40_CHAN_REG_SSPTR); 815 writel(lli_src->reg_lnk, base + D40_CHAN_REG_SSLNK); 816 817 writel(lli_dst->reg_cfg, base + D40_CHAN_REG_SDCFG); 818 writel(lli_dst->reg_elt, base + D40_CHAN_REG_SDELT); 819 writel(lli_dst->reg_ptr, base + D40_CHAN_REG_SDPTR); 820 writel(lli_dst->reg_lnk, base + D40_CHAN_REG_SDLNK); 821 } 822 823 static void d40_desc_done(struct d40_chan *d40c, struct d40_desc *desc) 824 { 825 list_add_tail(&desc->node, &d40c->done); 826 } 827 828 static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc) 829 { 830 struct d40_lcla_pool *pool = &chan->base->lcla_pool; 831 struct d40_log_lli_bidir *lli = &desc->lli_log; 832 int lli_current = desc->lli_current; 833 int lli_len = desc->lli_len; 834 bool cyclic = desc->cyclic; 835 int curr_lcla = -EINVAL; 836 int first_lcla = 0; 837 bool use_esram_lcla = chan->base->plat_data->use_esram_lcla; 838 bool linkback; 839 840 /* 841 * We may have partially running cyclic transfers, in case we did't get 842 * enough LCLA entries. 843 */ 844 linkback = cyclic && lli_current == 0; 845 846 /* 847 * For linkback, we need one LCLA even with only one link, because we 848 * can't link back to the one in LCPA space 849 */ 850 if (linkback || (lli_len - lli_current > 1)) { 851 /* 852 * If the channel is expected to use only soft_lli don't 853 * allocate a lcla. This is to avoid a HW issue that exists 854 * in some controller during a peripheral to memory transfer 855 * that uses linked lists. 856 */ 857 if (!(chan->phy_chan->use_soft_lli && 858 chan->dma_cfg.dir == DMA_DEV_TO_MEM)) 859 curr_lcla = d40_lcla_alloc_one(chan, desc); 860 861 first_lcla = curr_lcla; 862 } 863 864 /* 865 * For linkback, we normally load the LCPA in the loop since we need to 866 * link it to the second LCLA and not the first. However, if we 867 * couldn't even get a first LCLA, then we have to run in LCPA and 868 * reload manually. 869 */ 870 if (!linkback || curr_lcla == -EINVAL) { 871 unsigned int flags = 0; 872 873 if (curr_lcla == -EINVAL) 874 flags |= LLI_TERM_INT; 875 876 d40_log_lli_lcpa_write(chan->lcpa, 877 &lli->dst[lli_current], 878 &lli->src[lli_current], 879 curr_lcla, 880 flags); 881 lli_current++; 882 } 883 884 if (curr_lcla < 0) 885 goto set_current; 886 887 for (; lli_current < lli_len; lli_current++) { 888 unsigned int lcla_offset = chan->phy_chan->num * 1024 + 889 8 * curr_lcla * 2; 890 struct d40_log_lli *lcla = pool->base + lcla_offset; 891 unsigned int flags = 0; 892 int next_lcla; 893 894 if (lli_current + 1 < lli_len) 895 next_lcla = d40_lcla_alloc_one(chan, desc); 896 else 897 next_lcla = linkback ? first_lcla : -EINVAL; 898 899 if (cyclic || next_lcla == -EINVAL) 900 flags |= LLI_TERM_INT; 901 902 if (linkback && curr_lcla == first_lcla) { 903 /* First link goes in both LCPA and LCLA */ 904 d40_log_lli_lcpa_write(chan->lcpa, 905 &lli->dst[lli_current], 906 &lli->src[lli_current], 907 next_lcla, flags); 908 } 909 910 /* 911 * One unused LCLA in the cyclic case if the very first 912 * next_lcla fails... 913 */ 914 d40_log_lli_lcla_write(lcla, 915 &lli->dst[lli_current], 916 &lli->src[lli_current], 917 next_lcla, flags); 918 919 /* 920 * Cache maintenance is not needed if lcla is 921 * mapped in esram 922 */ 923 if (!use_esram_lcla) { 924 dma_sync_single_range_for_device(chan->base->dev, 925 pool->dma_addr, lcla_offset, 926 2 * sizeof(struct d40_log_lli), 927 DMA_TO_DEVICE); 928 } 929 curr_lcla = next_lcla; 930 931 if (curr_lcla == -EINVAL || curr_lcla == first_lcla) { 932 lli_current++; 933 break; 934 } 935 } 936 set_current: 937 desc->lli_current = lli_current; 938 } 939 940 static void d40_desc_load(struct d40_chan *d40c, struct d40_desc *d40d) 941 { 942 if (chan_is_physical(d40c)) { 943 d40_phy_lli_load(d40c, d40d); 944 d40d->lli_current = d40d->lli_len; 945 } else 946 d40_log_lli_to_lcxa(d40c, d40d); 947 } 948 949 static struct d40_desc *d40_first_active_get(struct d40_chan *d40c) 950 { 951 return list_first_entry_or_null(&d40c->active, struct d40_desc, node); 952 } 953 954 /* remove desc from current queue and add it to the pending_queue */ 955 static void d40_desc_queue(struct d40_chan *d40c, struct d40_desc *desc) 956 { 957 d40_desc_remove(desc); 958 desc->is_in_client_list = false; 959 list_add_tail(&desc->node, &d40c->pending_queue); 960 } 961 962 static struct d40_desc *d40_first_pending(struct d40_chan *d40c) 963 { 964 return list_first_entry_or_null(&d40c->pending_queue, struct d40_desc, 965 node); 966 } 967 968 static struct d40_desc *d40_first_queued(struct d40_chan *d40c) 969 { 970 return list_first_entry_or_null(&d40c->queue, struct d40_desc, node); 971 } 972 973 static struct d40_desc *d40_first_done(struct d40_chan *d40c) 974 { 975 return list_first_entry_or_null(&d40c->done, struct d40_desc, node); 976 } 977 978 static int d40_psize_2_burst_size(bool is_log, int psize) 979 { 980 if (is_log) { 981 if (psize == STEDMA40_PSIZE_LOG_1) 982 return 1; 983 } else { 984 if (psize == STEDMA40_PSIZE_PHY_1) 985 return 1; 986 } 987 988 return 2 << psize; 989 } 990 991 /* 992 * The dma only supports transmitting packages up to 993 * STEDMA40_MAX_SEG_SIZE * data_width, where data_width is stored in Bytes. 994 * 995 * Calculate the total number of dma elements required to send the entire sg list. 996 */ 997 static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2) 998 { 999 int dmalen; 1000 u32 max_w = max(data_width1, data_width2); 1001 u32 min_w = min(data_width1, data_width2); 1002 u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w); 1003 1004 if (seg_max > STEDMA40_MAX_SEG_SIZE) 1005 seg_max -= max_w; 1006 1007 if (!IS_ALIGNED(size, max_w)) 1008 return -EINVAL; 1009 1010 if (size <= seg_max) 1011 dmalen = 1; 1012 else { 1013 dmalen = size / seg_max; 1014 if (dmalen * seg_max < size) 1015 dmalen++; 1016 } 1017 return dmalen; 1018 } 1019 1020 static int d40_sg_2_dmalen(struct scatterlist *sgl, int sg_len, 1021 u32 data_width1, u32 data_width2) 1022 { 1023 struct scatterlist *sg; 1024 int i; 1025 int len = 0; 1026 int ret; 1027 1028 for_each_sg(sgl, sg, sg_len, i) { 1029 ret = d40_size_2_dmalen(sg_dma_len(sg), 1030 data_width1, data_width2); 1031 if (ret < 0) 1032 return ret; 1033 len += ret; 1034 } 1035 return len; 1036 } 1037 1038 static int __d40_execute_command_phy(struct d40_chan *d40c, 1039 enum d40_command command) 1040 { 1041 u32 status; 1042 int i; 1043 void __iomem *active_reg; 1044 int ret = 0; 1045 unsigned long flags; 1046 u32 wmask; 1047 1048 if (command == D40_DMA_STOP) { 1049 ret = __d40_execute_command_phy(d40c, D40_DMA_SUSPEND_REQ); 1050 if (ret) 1051 return ret; 1052 } 1053 1054 spin_lock_irqsave(&d40c->base->execmd_lock, flags); 1055 1056 if (d40c->phy_chan->num % 2 == 0) 1057 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE; 1058 else 1059 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO; 1060 1061 if (command == D40_DMA_SUSPEND_REQ) { 1062 status = (readl(active_reg) & 1063 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> 1064 D40_CHAN_POS(d40c->phy_chan->num); 1065 1066 if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP) 1067 goto unlock; 1068 } 1069 1070 wmask = 0xffffffff & ~(D40_CHAN_POS_MASK(d40c->phy_chan->num)); 1071 writel(wmask | (command << D40_CHAN_POS(d40c->phy_chan->num)), 1072 active_reg); 1073 1074 if (command == D40_DMA_SUSPEND_REQ) { 1075 1076 for (i = 0 ; i < D40_SUSPEND_MAX_IT; i++) { 1077 status = (readl(active_reg) & 1078 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> 1079 D40_CHAN_POS(d40c->phy_chan->num); 1080 1081 cpu_relax(); 1082 /* 1083 * Reduce the number of bus accesses while 1084 * waiting for the DMA to suspend. 1085 */ 1086 udelay(3); 1087 1088 if (status == D40_DMA_STOP || 1089 status == D40_DMA_SUSPENDED) 1090 break; 1091 } 1092 1093 if (i == D40_SUSPEND_MAX_IT) { 1094 chan_err(d40c, 1095 "unable to suspend the chl %d (log: %d) status %x\n", 1096 d40c->phy_chan->num, d40c->log_num, 1097 status); 1098 dump_stack(); 1099 ret = -EBUSY; 1100 } 1101 1102 } 1103 unlock: 1104 spin_unlock_irqrestore(&d40c->base->execmd_lock, flags); 1105 return ret; 1106 } 1107 1108 static void d40_term_all(struct d40_chan *d40c) 1109 { 1110 struct d40_desc *d40d; 1111 struct d40_desc *_d; 1112 1113 /* Release completed descriptors */ 1114 while ((d40d = d40_first_done(d40c))) { 1115 d40_desc_remove(d40d); 1116 d40_desc_free(d40c, d40d); 1117 } 1118 1119 /* Release active descriptors */ 1120 while ((d40d = d40_first_active_get(d40c))) { 1121 d40_desc_remove(d40d); 1122 d40_desc_free(d40c, d40d); 1123 } 1124 1125 /* Release queued descriptors waiting for transfer */ 1126 while ((d40d = d40_first_queued(d40c))) { 1127 d40_desc_remove(d40d); 1128 d40_desc_free(d40c, d40d); 1129 } 1130 1131 /* Release pending descriptors */ 1132 while ((d40d = d40_first_pending(d40c))) { 1133 d40_desc_remove(d40d); 1134 d40_desc_free(d40c, d40d); 1135 } 1136 1137 /* Release client owned descriptors */ 1138 if (!list_empty(&d40c->client)) 1139 list_for_each_entry_safe(d40d, _d, &d40c->client, node) { 1140 d40_desc_remove(d40d); 1141 d40_desc_free(d40c, d40d); 1142 } 1143 1144 /* Release descriptors in prepare queue */ 1145 if (!list_empty(&d40c->prepare_queue)) 1146 list_for_each_entry_safe(d40d, _d, 1147 &d40c->prepare_queue, node) { 1148 d40_desc_remove(d40d); 1149 d40_desc_free(d40c, d40d); 1150 } 1151 1152 d40c->pending_tx = 0; 1153 } 1154 1155 static void __d40_config_set_event(struct d40_chan *d40c, 1156 enum d40_events event_type, u32 event, 1157 int reg) 1158 { 1159 void __iomem *addr = chan_base(d40c) + reg; 1160 int tries; 1161 u32 status; 1162 1163 switch (event_type) { 1164 1165 case D40_DEACTIVATE_EVENTLINE: 1166 1167 writel((D40_DEACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event)) 1168 | ~D40_EVENTLINE_MASK(event), addr); 1169 break; 1170 1171 case D40_SUSPEND_REQ_EVENTLINE: 1172 status = (readl(addr) & D40_EVENTLINE_MASK(event)) >> 1173 D40_EVENTLINE_POS(event); 1174 1175 if (status == D40_DEACTIVATE_EVENTLINE || 1176 status == D40_SUSPEND_REQ_EVENTLINE) 1177 break; 1178 1179 writel((D40_SUSPEND_REQ_EVENTLINE << D40_EVENTLINE_POS(event)) 1180 | ~D40_EVENTLINE_MASK(event), addr); 1181 1182 for (tries = 0 ; tries < D40_SUSPEND_MAX_IT; tries++) { 1183 1184 status = (readl(addr) & D40_EVENTLINE_MASK(event)) >> 1185 D40_EVENTLINE_POS(event); 1186 1187 cpu_relax(); 1188 /* 1189 * Reduce the number of bus accesses while 1190 * waiting for the DMA to suspend. 1191 */ 1192 udelay(3); 1193 1194 if (status == D40_DEACTIVATE_EVENTLINE) 1195 break; 1196 } 1197 1198 if (tries == D40_SUSPEND_MAX_IT) { 1199 chan_err(d40c, 1200 "unable to stop the event_line chl %d (log: %d)" 1201 "status %x\n", d40c->phy_chan->num, 1202 d40c->log_num, status); 1203 } 1204 break; 1205 1206 case D40_ACTIVATE_EVENTLINE: 1207 /* 1208 * The hardware sometimes doesn't register the enable when src and dst 1209 * event lines are active on the same logical channel. Retry to ensure 1210 * it does. Usually only one retry is sufficient. 1211 */ 1212 tries = 100; 1213 while (--tries) { 1214 writel((D40_ACTIVATE_EVENTLINE << 1215 D40_EVENTLINE_POS(event)) | 1216 ~D40_EVENTLINE_MASK(event), addr); 1217 1218 if (readl(addr) & D40_EVENTLINE_MASK(event)) 1219 break; 1220 } 1221 1222 if (tries != 99) 1223 dev_dbg(chan2dev(d40c), 1224 "[%s] workaround enable S%cLNK (%d tries)\n", 1225 __func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D', 1226 100 - tries); 1227 1228 WARN_ON(!tries); 1229 break; 1230 1231 case D40_ROUND_EVENTLINE: 1232 BUG(); 1233 break; 1234 1235 } 1236 } 1237 1238 static void d40_config_set_event(struct d40_chan *d40c, 1239 enum d40_events event_type) 1240 { 1241 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); 1242 1243 /* Enable event line connected to device (or memcpy) */ 1244 if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) || 1245 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) 1246 __d40_config_set_event(d40c, event_type, event, 1247 D40_CHAN_REG_SSLNK); 1248 1249 if (d40c->dma_cfg.dir != DMA_DEV_TO_MEM) 1250 __d40_config_set_event(d40c, event_type, event, 1251 D40_CHAN_REG_SDLNK); 1252 } 1253 1254 static u32 d40_chan_has_events(struct d40_chan *d40c) 1255 { 1256 void __iomem *chanbase = chan_base(d40c); 1257 u32 val; 1258 1259 val = readl(chanbase + D40_CHAN_REG_SSLNK); 1260 val |= readl(chanbase + D40_CHAN_REG_SDLNK); 1261 1262 return val; 1263 } 1264 1265 static int 1266 __d40_execute_command_log(struct d40_chan *d40c, enum d40_command command) 1267 { 1268 unsigned long flags; 1269 int ret = 0; 1270 u32 active_status; 1271 void __iomem *active_reg; 1272 1273 if (d40c->phy_chan->num % 2 == 0) 1274 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE; 1275 else 1276 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO; 1277 1278 1279 spin_lock_irqsave(&d40c->phy_chan->lock, flags); 1280 1281 switch (command) { 1282 case D40_DMA_STOP: 1283 case D40_DMA_SUSPEND_REQ: 1284 1285 active_status = (readl(active_reg) & 1286 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> 1287 D40_CHAN_POS(d40c->phy_chan->num); 1288 1289 if (active_status == D40_DMA_RUN) 1290 d40_config_set_event(d40c, D40_SUSPEND_REQ_EVENTLINE); 1291 else 1292 d40_config_set_event(d40c, D40_DEACTIVATE_EVENTLINE); 1293 1294 if (!d40_chan_has_events(d40c) && (command == D40_DMA_STOP)) 1295 ret = __d40_execute_command_phy(d40c, command); 1296 1297 break; 1298 1299 case D40_DMA_RUN: 1300 1301 d40_config_set_event(d40c, D40_ACTIVATE_EVENTLINE); 1302 ret = __d40_execute_command_phy(d40c, command); 1303 break; 1304 1305 case D40_DMA_SUSPENDED: 1306 BUG(); 1307 break; 1308 } 1309 1310 spin_unlock_irqrestore(&d40c->phy_chan->lock, flags); 1311 return ret; 1312 } 1313 1314 static int d40_channel_execute_command(struct d40_chan *d40c, 1315 enum d40_command command) 1316 { 1317 if (chan_is_logical(d40c)) 1318 return __d40_execute_command_log(d40c, command); 1319 else 1320 return __d40_execute_command_phy(d40c, command); 1321 } 1322 1323 static u32 d40_get_prmo(struct d40_chan *d40c) 1324 { 1325 static const unsigned int phy_map[] = { 1326 [STEDMA40_PCHAN_BASIC_MODE] 1327 = D40_DREG_PRMO_PCHAN_BASIC, 1328 [STEDMA40_PCHAN_MODULO_MODE] 1329 = D40_DREG_PRMO_PCHAN_MODULO, 1330 [STEDMA40_PCHAN_DOUBLE_DST_MODE] 1331 = D40_DREG_PRMO_PCHAN_DOUBLE_DST, 1332 }; 1333 static const unsigned int log_map[] = { 1334 [STEDMA40_LCHAN_SRC_PHY_DST_LOG] 1335 = D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG, 1336 [STEDMA40_LCHAN_SRC_LOG_DST_PHY] 1337 = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY, 1338 [STEDMA40_LCHAN_SRC_LOG_DST_LOG] 1339 = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG, 1340 }; 1341 1342 if (chan_is_physical(d40c)) 1343 return phy_map[d40c->dma_cfg.mode_opt]; 1344 else 1345 return log_map[d40c->dma_cfg.mode_opt]; 1346 } 1347 1348 static void d40_config_write(struct d40_chan *d40c) 1349 { 1350 u32 addr_base; 1351 u32 var; 1352 1353 /* Odd addresses are even addresses + 4 */ 1354 addr_base = (d40c->phy_chan->num % 2) * 4; 1355 /* Setup channel mode to logical or physical */ 1356 var = ((u32)(chan_is_logical(d40c)) + 1) << 1357 D40_CHAN_POS(d40c->phy_chan->num); 1358 writel(var, d40c->base->virtbase + D40_DREG_PRMSE + addr_base); 1359 1360 /* Setup operational mode option register */ 1361 var = d40_get_prmo(d40c) << D40_CHAN_POS(d40c->phy_chan->num); 1362 1363 writel(var, d40c->base->virtbase + D40_DREG_PRMOE + addr_base); 1364 1365 if (chan_is_logical(d40c)) { 1366 int lidx = (d40c->phy_chan->num << D40_SREG_ELEM_LOG_LIDX_POS) 1367 & D40_SREG_ELEM_LOG_LIDX_MASK; 1368 void __iomem *chanbase = chan_base(d40c); 1369 1370 /* Set default config for CFG reg */ 1371 writel(d40c->src_def_cfg, chanbase + D40_CHAN_REG_SSCFG); 1372 writel(d40c->dst_def_cfg, chanbase + D40_CHAN_REG_SDCFG); 1373 1374 /* Set LIDX for lcla */ 1375 writel(lidx, chanbase + D40_CHAN_REG_SSELT); 1376 writel(lidx, chanbase + D40_CHAN_REG_SDELT); 1377 1378 /* Clear LNK which will be used by d40_chan_has_events() */ 1379 writel(0, chanbase + D40_CHAN_REG_SSLNK); 1380 writel(0, chanbase + D40_CHAN_REG_SDLNK); 1381 } 1382 } 1383 1384 static u32 d40_residue(struct d40_chan *d40c) 1385 { 1386 u32 num_elt; 1387 1388 if (chan_is_logical(d40c)) 1389 num_elt = (readl(&d40c->lcpa->lcsp2) & D40_MEM_LCSP2_ECNT_MASK) 1390 >> D40_MEM_LCSP2_ECNT_POS; 1391 else { 1392 u32 val = readl(chan_base(d40c) + D40_CHAN_REG_SDELT); 1393 num_elt = (val & D40_SREG_ELEM_PHY_ECNT_MASK) 1394 >> D40_SREG_ELEM_PHY_ECNT_POS; 1395 } 1396 1397 return num_elt * d40c->dma_cfg.dst_info.data_width; 1398 } 1399 1400 static bool d40_tx_is_linked(struct d40_chan *d40c) 1401 { 1402 bool is_link; 1403 1404 if (chan_is_logical(d40c)) 1405 is_link = readl(&d40c->lcpa->lcsp3) & D40_MEM_LCSP3_DLOS_MASK; 1406 else 1407 is_link = readl(chan_base(d40c) + D40_CHAN_REG_SDLNK) 1408 & D40_SREG_LNK_PHYS_LNK_MASK; 1409 1410 return is_link; 1411 } 1412 1413 static int d40_pause(struct dma_chan *chan) 1414 { 1415 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 1416 int res = 0; 1417 unsigned long flags; 1418 1419 if (d40c->phy_chan == NULL) { 1420 chan_err(d40c, "Channel is not allocated!\n"); 1421 return -EINVAL; 1422 } 1423 1424 if (!d40c->busy) 1425 return 0; 1426 1427 spin_lock_irqsave(&d40c->lock, flags); 1428 pm_runtime_get_sync(d40c->base->dev); 1429 1430 res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); 1431 1432 pm_runtime_mark_last_busy(d40c->base->dev); 1433 pm_runtime_put_autosuspend(d40c->base->dev); 1434 spin_unlock_irqrestore(&d40c->lock, flags); 1435 return res; 1436 } 1437 1438 static int d40_resume(struct dma_chan *chan) 1439 { 1440 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 1441 int res = 0; 1442 unsigned long flags; 1443 1444 if (d40c->phy_chan == NULL) { 1445 chan_err(d40c, "Channel is not allocated!\n"); 1446 return -EINVAL; 1447 } 1448 1449 if (!d40c->busy) 1450 return 0; 1451 1452 spin_lock_irqsave(&d40c->lock, flags); 1453 pm_runtime_get_sync(d40c->base->dev); 1454 1455 /* If bytes left to transfer or linked tx resume job */ 1456 if (d40_residue(d40c) || d40_tx_is_linked(d40c)) 1457 res = d40_channel_execute_command(d40c, D40_DMA_RUN); 1458 1459 pm_runtime_mark_last_busy(d40c->base->dev); 1460 pm_runtime_put_autosuspend(d40c->base->dev); 1461 spin_unlock_irqrestore(&d40c->lock, flags); 1462 return res; 1463 } 1464 1465 static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx) 1466 { 1467 struct d40_chan *d40c = container_of(tx->chan, 1468 struct d40_chan, 1469 chan); 1470 struct d40_desc *d40d = container_of(tx, struct d40_desc, txd); 1471 unsigned long flags; 1472 dma_cookie_t cookie; 1473 1474 spin_lock_irqsave(&d40c->lock, flags); 1475 cookie = dma_cookie_assign(tx); 1476 d40_desc_queue(d40c, d40d); 1477 spin_unlock_irqrestore(&d40c->lock, flags); 1478 1479 return cookie; 1480 } 1481 1482 static int d40_start(struct d40_chan *d40c) 1483 { 1484 return d40_channel_execute_command(d40c, D40_DMA_RUN); 1485 } 1486 1487 static struct d40_desc *d40_queue_start(struct d40_chan *d40c) 1488 { 1489 struct d40_desc *d40d; 1490 int err; 1491 1492 /* Start queued jobs, if any */ 1493 d40d = d40_first_queued(d40c); 1494 1495 if (d40d != NULL) { 1496 if (!d40c->busy) { 1497 d40c->busy = true; 1498 pm_runtime_get_sync(d40c->base->dev); 1499 } 1500 1501 /* Remove from queue */ 1502 d40_desc_remove(d40d); 1503 1504 /* Add to active queue */ 1505 d40_desc_submit(d40c, d40d); 1506 1507 /* Initiate DMA job */ 1508 d40_desc_load(d40c, d40d); 1509 1510 /* Start dma job */ 1511 err = d40_start(d40c); 1512 1513 if (err) 1514 return NULL; 1515 } 1516 1517 return d40d; 1518 } 1519 1520 /* called from interrupt context */ 1521 static void dma_tc_handle(struct d40_chan *d40c) 1522 { 1523 struct d40_desc *d40d; 1524 1525 /* Get first active entry from list */ 1526 d40d = d40_first_active_get(d40c); 1527 1528 if (d40d == NULL) 1529 return; 1530 1531 if (d40d->cyclic) { 1532 /* 1533 * If this was a paritially loaded list, we need to reloaded 1534 * it, and only when the list is completed. We need to check 1535 * for done because the interrupt will hit for every link, and 1536 * not just the last one. 1537 */ 1538 if (d40d->lli_current < d40d->lli_len 1539 && !d40_tx_is_linked(d40c) 1540 && !d40_residue(d40c)) { 1541 d40_lcla_free_all(d40c, d40d); 1542 d40_desc_load(d40c, d40d); 1543 (void) d40_start(d40c); 1544 1545 if (d40d->lli_current == d40d->lli_len) 1546 d40d->lli_current = 0; 1547 } 1548 } else { 1549 d40_lcla_free_all(d40c, d40d); 1550 1551 if (d40d->lli_current < d40d->lli_len) { 1552 d40_desc_load(d40c, d40d); 1553 /* Start dma job */ 1554 (void) d40_start(d40c); 1555 return; 1556 } 1557 1558 if (d40_queue_start(d40c) == NULL) { 1559 d40c->busy = false; 1560 1561 pm_runtime_mark_last_busy(d40c->base->dev); 1562 pm_runtime_put_autosuspend(d40c->base->dev); 1563 } 1564 1565 d40_desc_remove(d40d); 1566 d40_desc_done(d40c, d40d); 1567 } 1568 1569 d40c->pending_tx++; 1570 tasklet_schedule(&d40c->tasklet); 1571 1572 } 1573 1574 static void dma_tasklet(unsigned long data) 1575 { 1576 struct d40_chan *d40c = (struct d40_chan *) data; 1577 struct d40_desc *d40d; 1578 unsigned long flags; 1579 bool callback_active; 1580 struct dmaengine_desc_callback cb; 1581 1582 spin_lock_irqsave(&d40c->lock, flags); 1583 1584 /* Get first entry from the done list */ 1585 d40d = d40_first_done(d40c); 1586 if (d40d == NULL) { 1587 /* Check if we have reached here for cyclic job */ 1588 d40d = d40_first_active_get(d40c); 1589 if (d40d == NULL || !d40d->cyclic) 1590 goto check_pending_tx; 1591 } 1592 1593 if (!d40d->cyclic) 1594 dma_cookie_complete(&d40d->txd); 1595 1596 /* 1597 * If terminating a channel pending_tx is set to zero. 1598 * This prevents any finished active jobs to return to the client. 1599 */ 1600 if (d40c->pending_tx == 0) { 1601 spin_unlock_irqrestore(&d40c->lock, flags); 1602 return; 1603 } 1604 1605 /* Callback to client */ 1606 callback_active = !!(d40d->txd.flags & DMA_PREP_INTERRUPT); 1607 dmaengine_desc_get_callback(&d40d->txd, &cb); 1608 1609 if (!d40d->cyclic) { 1610 if (async_tx_test_ack(&d40d->txd)) { 1611 d40_desc_remove(d40d); 1612 d40_desc_free(d40c, d40d); 1613 } else if (!d40d->is_in_client_list) { 1614 d40_desc_remove(d40d); 1615 d40_lcla_free_all(d40c, d40d); 1616 list_add_tail(&d40d->node, &d40c->client); 1617 d40d->is_in_client_list = true; 1618 } 1619 } 1620 1621 d40c->pending_tx--; 1622 1623 if (d40c->pending_tx) 1624 tasklet_schedule(&d40c->tasklet); 1625 1626 spin_unlock_irqrestore(&d40c->lock, flags); 1627 1628 if (callback_active) 1629 dmaengine_desc_callback_invoke(&cb, NULL); 1630 1631 return; 1632 check_pending_tx: 1633 /* Rescue manouver if receiving double interrupts */ 1634 if (d40c->pending_tx > 0) 1635 d40c->pending_tx--; 1636 spin_unlock_irqrestore(&d40c->lock, flags); 1637 } 1638 1639 static irqreturn_t d40_handle_interrupt(int irq, void *data) 1640 { 1641 int i; 1642 u32 idx; 1643 u32 row; 1644 long chan = -1; 1645 struct d40_chan *d40c; 1646 unsigned long flags; 1647 struct d40_base *base = data; 1648 u32 *regs = base->regs_interrupt; 1649 struct d40_interrupt_lookup *il = base->gen_dmac.il; 1650 u32 il_size = base->gen_dmac.il_size; 1651 1652 spin_lock_irqsave(&base->interrupt_lock, flags); 1653 1654 /* Read interrupt status of both logical and physical channels */ 1655 for (i = 0; i < il_size; i++) 1656 regs[i] = readl(base->virtbase + il[i].src); 1657 1658 for (;;) { 1659 1660 chan = find_next_bit((unsigned long *)regs, 1661 BITS_PER_LONG * il_size, chan + 1); 1662 1663 /* No more set bits found? */ 1664 if (chan == BITS_PER_LONG * il_size) 1665 break; 1666 1667 row = chan / BITS_PER_LONG; 1668 idx = chan & (BITS_PER_LONG - 1); 1669 1670 if (il[row].offset == D40_PHY_CHAN) 1671 d40c = base->lookup_phy_chans[idx]; 1672 else 1673 d40c = base->lookup_log_chans[il[row].offset + idx]; 1674 1675 if (!d40c) { 1676 /* 1677 * No error because this can happen if something else 1678 * in the system is using the channel. 1679 */ 1680 continue; 1681 } 1682 1683 /* ACK interrupt */ 1684 writel(BIT(idx), base->virtbase + il[row].clr); 1685 1686 spin_lock(&d40c->lock); 1687 1688 if (!il[row].is_error) 1689 dma_tc_handle(d40c); 1690 else 1691 d40_err(base->dev, "IRQ chan: %ld offset %d idx %d\n", 1692 chan, il[row].offset, idx); 1693 1694 spin_unlock(&d40c->lock); 1695 } 1696 1697 spin_unlock_irqrestore(&base->interrupt_lock, flags); 1698 1699 return IRQ_HANDLED; 1700 } 1701 1702 static int d40_validate_conf(struct d40_chan *d40c, 1703 struct stedma40_chan_cfg *conf) 1704 { 1705 int res = 0; 1706 bool is_log = conf->mode == STEDMA40_MODE_LOGICAL; 1707 1708 if (!conf->dir) { 1709 chan_err(d40c, "Invalid direction.\n"); 1710 res = -EINVAL; 1711 } 1712 1713 if ((is_log && conf->dev_type > d40c->base->num_log_chans) || 1714 (!is_log && conf->dev_type > d40c->base->num_phy_chans) || 1715 (conf->dev_type < 0)) { 1716 chan_err(d40c, "Invalid device type (%d)\n", conf->dev_type); 1717 res = -EINVAL; 1718 } 1719 1720 if (conf->dir == DMA_DEV_TO_DEV) { 1721 /* 1722 * DMAC HW supports it. Will be added to this driver, 1723 * in case any dma client requires it. 1724 */ 1725 chan_err(d40c, "periph to periph not supported\n"); 1726 res = -EINVAL; 1727 } 1728 1729 if (d40_psize_2_burst_size(is_log, conf->src_info.psize) * 1730 conf->src_info.data_width != 1731 d40_psize_2_burst_size(is_log, conf->dst_info.psize) * 1732 conf->dst_info.data_width) { 1733 /* 1734 * The DMAC hardware only supports 1735 * src (burst x width) == dst (burst x width) 1736 */ 1737 1738 chan_err(d40c, "src (burst x width) != dst (burst x width)\n"); 1739 res = -EINVAL; 1740 } 1741 1742 return res; 1743 } 1744 1745 static bool d40_alloc_mask_set(struct d40_phy_res *phy, 1746 bool is_src, int log_event_line, bool is_log, 1747 bool *first_user) 1748 { 1749 unsigned long flags; 1750 spin_lock_irqsave(&phy->lock, flags); 1751 1752 *first_user = ((phy->allocated_src | phy->allocated_dst) 1753 == D40_ALLOC_FREE); 1754 1755 if (!is_log) { 1756 /* Physical interrupts are masked per physical full channel */ 1757 if (phy->allocated_src == D40_ALLOC_FREE && 1758 phy->allocated_dst == D40_ALLOC_FREE) { 1759 phy->allocated_dst = D40_ALLOC_PHY; 1760 phy->allocated_src = D40_ALLOC_PHY; 1761 goto found_unlock; 1762 } else 1763 goto not_found_unlock; 1764 } 1765 1766 /* Logical channel */ 1767 if (is_src) { 1768 if (phy->allocated_src == D40_ALLOC_PHY) 1769 goto not_found_unlock; 1770 1771 if (phy->allocated_src == D40_ALLOC_FREE) 1772 phy->allocated_src = D40_ALLOC_LOG_FREE; 1773 1774 if (!(phy->allocated_src & BIT(log_event_line))) { 1775 phy->allocated_src |= BIT(log_event_line); 1776 goto found_unlock; 1777 } else 1778 goto not_found_unlock; 1779 } else { 1780 if (phy->allocated_dst == D40_ALLOC_PHY) 1781 goto not_found_unlock; 1782 1783 if (phy->allocated_dst == D40_ALLOC_FREE) 1784 phy->allocated_dst = D40_ALLOC_LOG_FREE; 1785 1786 if (!(phy->allocated_dst & BIT(log_event_line))) { 1787 phy->allocated_dst |= BIT(log_event_line); 1788 goto found_unlock; 1789 } 1790 } 1791 not_found_unlock: 1792 spin_unlock_irqrestore(&phy->lock, flags); 1793 return false; 1794 found_unlock: 1795 spin_unlock_irqrestore(&phy->lock, flags); 1796 return true; 1797 } 1798 1799 static bool d40_alloc_mask_free(struct d40_phy_res *phy, bool is_src, 1800 int log_event_line) 1801 { 1802 unsigned long flags; 1803 bool is_free = false; 1804 1805 spin_lock_irqsave(&phy->lock, flags); 1806 if (!log_event_line) { 1807 phy->allocated_dst = D40_ALLOC_FREE; 1808 phy->allocated_src = D40_ALLOC_FREE; 1809 is_free = true; 1810 goto unlock; 1811 } 1812 1813 /* Logical channel */ 1814 if (is_src) { 1815 phy->allocated_src &= ~BIT(log_event_line); 1816 if (phy->allocated_src == D40_ALLOC_LOG_FREE) 1817 phy->allocated_src = D40_ALLOC_FREE; 1818 } else { 1819 phy->allocated_dst &= ~BIT(log_event_line); 1820 if (phy->allocated_dst == D40_ALLOC_LOG_FREE) 1821 phy->allocated_dst = D40_ALLOC_FREE; 1822 } 1823 1824 is_free = ((phy->allocated_src | phy->allocated_dst) == 1825 D40_ALLOC_FREE); 1826 unlock: 1827 spin_unlock_irqrestore(&phy->lock, flags); 1828 1829 return is_free; 1830 } 1831 1832 static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user) 1833 { 1834 int dev_type = d40c->dma_cfg.dev_type; 1835 int event_group; 1836 int event_line; 1837 struct d40_phy_res *phys; 1838 int i; 1839 int j; 1840 int log_num; 1841 int num_phy_chans; 1842 bool is_src; 1843 bool is_log = d40c->dma_cfg.mode == STEDMA40_MODE_LOGICAL; 1844 1845 phys = d40c->base->phy_res; 1846 num_phy_chans = d40c->base->num_phy_chans; 1847 1848 if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) { 1849 log_num = 2 * dev_type; 1850 is_src = true; 1851 } else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || 1852 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { 1853 /* dst event lines are used for logical memcpy */ 1854 log_num = 2 * dev_type + 1; 1855 is_src = false; 1856 } else 1857 return -EINVAL; 1858 1859 event_group = D40_TYPE_TO_GROUP(dev_type); 1860 event_line = D40_TYPE_TO_EVENT(dev_type); 1861 1862 if (!is_log) { 1863 if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { 1864 /* Find physical half channel */ 1865 if (d40c->dma_cfg.use_fixed_channel) { 1866 i = d40c->dma_cfg.phy_channel; 1867 if (d40_alloc_mask_set(&phys[i], is_src, 1868 0, is_log, 1869 first_phy_user)) 1870 goto found_phy; 1871 } else { 1872 for (i = 0; i < num_phy_chans; i++) { 1873 if (d40_alloc_mask_set(&phys[i], is_src, 1874 0, is_log, 1875 first_phy_user)) 1876 goto found_phy; 1877 } 1878 } 1879 } else 1880 for (j = 0; j < d40c->base->num_phy_chans; j += 8) { 1881 int phy_num = j + event_group * 2; 1882 for (i = phy_num; i < phy_num + 2; i++) { 1883 if (d40_alloc_mask_set(&phys[i], 1884 is_src, 1885 0, 1886 is_log, 1887 first_phy_user)) 1888 goto found_phy; 1889 } 1890 } 1891 return -EINVAL; 1892 found_phy: 1893 d40c->phy_chan = &phys[i]; 1894 d40c->log_num = D40_PHY_CHAN; 1895 goto out; 1896 } 1897 if (dev_type == -1) 1898 return -EINVAL; 1899 1900 /* Find logical channel */ 1901 for (j = 0; j < d40c->base->num_phy_chans; j += 8) { 1902 int phy_num = j + event_group * 2; 1903 1904 if (d40c->dma_cfg.use_fixed_channel) { 1905 i = d40c->dma_cfg.phy_channel; 1906 1907 if ((i != phy_num) && (i != phy_num + 1)) { 1908 dev_err(chan2dev(d40c), 1909 "invalid fixed phy channel %d\n", i); 1910 return -EINVAL; 1911 } 1912 1913 if (d40_alloc_mask_set(&phys[i], is_src, event_line, 1914 is_log, first_phy_user)) 1915 goto found_log; 1916 1917 dev_err(chan2dev(d40c), 1918 "could not allocate fixed phy channel %d\n", i); 1919 return -EINVAL; 1920 } 1921 1922 /* 1923 * Spread logical channels across all available physical rather 1924 * than pack every logical channel at the first available phy 1925 * channels. 1926 */ 1927 if (is_src) { 1928 for (i = phy_num; i < phy_num + 2; i++) { 1929 if (d40_alloc_mask_set(&phys[i], is_src, 1930 event_line, is_log, 1931 first_phy_user)) 1932 goto found_log; 1933 } 1934 } else { 1935 for (i = phy_num + 1; i >= phy_num; i--) { 1936 if (d40_alloc_mask_set(&phys[i], is_src, 1937 event_line, is_log, 1938 first_phy_user)) 1939 goto found_log; 1940 } 1941 } 1942 } 1943 return -EINVAL; 1944 1945 found_log: 1946 d40c->phy_chan = &phys[i]; 1947 d40c->log_num = log_num; 1948 out: 1949 1950 if (is_log) 1951 d40c->base->lookup_log_chans[d40c->log_num] = d40c; 1952 else 1953 d40c->base->lookup_phy_chans[d40c->phy_chan->num] = d40c; 1954 1955 return 0; 1956 1957 } 1958 1959 static int d40_config_memcpy(struct d40_chan *d40c) 1960 { 1961 dma_cap_mask_t cap = d40c->chan.device->cap_mask; 1962 1963 if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) { 1964 d40c->dma_cfg = dma40_memcpy_conf_log; 1965 d40c->dma_cfg.dev_type = dma40_memcpy_channels[d40c->chan.chan_id]; 1966 1967 d40_log_cfg(&d40c->dma_cfg, 1968 &d40c->log_def.lcsp1, &d40c->log_def.lcsp3); 1969 1970 } else if (dma_has_cap(DMA_MEMCPY, cap) && 1971 dma_has_cap(DMA_SLAVE, cap)) { 1972 d40c->dma_cfg = dma40_memcpy_conf_phy; 1973 1974 /* Generate interrrupt at end of transfer or relink. */ 1975 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS); 1976 1977 /* Generate interrupt on error. */ 1978 d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS); 1979 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS); 1980 1981 } else { 1982 chan_err(d40c, "No memcpy\n"); 1983 return -EINVAL; 1984 } 1985 1986 return 0; 1987 } 1988 1989 static int d40_free_dma(struct d40_chan *d40c) 1990 { 1991 1992 int res = 0; 1993 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); 1994 struct d40_phy_res *phy = d40c->phy_chan; 1995 bool is_src; 1996 1997 /* Terminate all queued and active transfers */ 1998 d40_term_all(d40c); 1999 2000 if (phy == NULL) { 2001 chan_err(d40c, "phy == null\n"); 2002 return -EINVAL; 2003 } 2004 2005 if (phy->allocated_src == D40_ALLOC_FREE && 2006 phy->allocated_dst == D40_ALLOC_FREE) { 2007 chan_err(d40c, "channel already free\n"); 2008 return -EINVAL; 2009 } 2010 2011 if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || 2012 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) 2013 is_src = false; 2014 else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) 2015 is_src = true; 2016 else { 2017 chan_err(d40c, "Unknown direction\n"); 2018 return -EINVAL; 2019 } 2020 2021 pm_runtime_get_sync(d40c->base->dev); 2022 res = d40_channel_execute_command(d40c, D40_DMA_STOP); 2023 if (res) { 2024 chan_err(d40c, "stop failed\n"); 2025 goto mark_last_busy; 2026 } 2027 2028 d40_alloc_mask_free(phy, is_src, chan_is_logical(d40c) ? event : 0); 2029 2030 if (chan_is_logical(d40c)) 2031 d40c->base->lookup_log_chans[d40c->log_num] = NULL; 2032 else 2033 d40c->base->lookup_phy_chans[phy->num] = NULL; 2034 2035 if (d40c->busy) { 2036 pm_runtime_mark_last_busy(d40c->base->dev); 2037 pm_runtime_put_autosuspend(d40c->base->dev); 2038 } 2039 2040 d40c->busy = false; 2041 d40c->phy_chan = NULL; 2042 d40c->configured = false; 2043 mark_last_busy: 2044 pm_runtime_mark_last_busy(d40c->base->dev); 2045 pm_runtime_put_autosuspend(d40c->base->dev); 2046 return res; 2047 } 2048 2049 static bool d40_is_paused(struct d40_chan *d40c) 2050 { 2051 void __iomem *chanbase = chan_base(d40c); 2052 bool is_paused = false; 2053 unsigned long flags; 2054 void __iomem *active_reg; 2055 u32 status; 2056 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); 2057 2058 spin_lock_irqsave(&d40c->lock, flags); 2059 2060 if (chan_is_physical(d40c)) { 2061 if (d40c->phy_chan->num % 2 == 0) 2062 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE; 2063 else 2064 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO; 2065 2066 status = (readl(active_reg) & 2067 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> 2068 D40_CHAN_POS(d40c->phy_chan->num); 2069 if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP) 2070 is_paused = true; 2071 goto unlock; 2072 } 2073 2074 if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || 2075 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { 2076 status = readl(chanbase + D40_CHAN_REG_SDLNK); 2077 } else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) { 2078 status = readl(chanbase + D40_CHAN_REG_SSLNK); 2079 } else { 2080 chan_err(d40c, "Unknown direction\n"); 2081 goto unlock; 2082 } 2083 2084 status = (status & D40_EVENTLINE_MASK(event)) >> 2085 D40_EVENTLINE_POS(event); 2086 2087 if (status != D40_DMA_RUN) 2088 is_paused = true; 2089 unlock: 2090 spin_unlock_irqrestore(&d40c->lock, flags); 2091 return is_paused; 2092 2093 } 2094 2095 static u32 stedma40_residue(struct dma_chan *chan) 2096 { 2097 struct d40_chan *d40c = 2098 container_of(chan, struct d40_chan, chan); 2099 u32 bytes_left; 2100 unsigned long flags; 2101 2102 spin_lock_irqsave(&d40c->lock, flags); 2103 bytes_left = d40_residue(d40c); 2104 spin_unlock_irqrestore(&d40c->lock, flags); 2105 2106 return bytes_left; 2107 } 2108 2109 static int 2110 d40_prep_sg_log(struct d40_chan *chan, struct d40_desc *desc, 2111 struct scatterlist *sg_src, struct scatterlist *sg_dst, 2112 unsigned int sg_len, dma_addr_t src_dev_addr, 2113 dma_addr_t dst_dev_addr) 2114 { 2115 struct stedma40_chan_cfg *cfg = &chan->dma_cfg; 2116 struct stedma40_half_channel_info *src_info = &cfg->src_info; 2117 struct stedma40_half_channel_info *dst_info = &cfg->dst_info; 2118 int ret; 2119 2120 ret = d40_log_sg_to_lli(sg_src, sg_len, 2121 src_dev_addr, 2122 desc->lli_log.src, 2123 chan->log_def.lcsp1, 2124 src_info->data_width, 2125 dst_info->data_width); 2126 2127 ret = d40_log_sg_to_lli(sg_dst, sg_len, 2128 dst_dev_addr, 2129 desc->lli_log.dst, 2130 chan->log_def.lcsp3, 2131 dst_info->data_width, 2132 src_info->data_width); 2133 2134 return ret < 0 ? ret : 0; 2135 } 2136 2137 static int 2138 d40_prep_sg_phy(struct d40_chan *chan, struct d40_desc *desc, 2139 struct scatterlist *sg_src, struct scatterlist *sg_dst, 2140 unsigned int sg_len, dma_addr_t src_dev_addr, 2141 dma_addr_t dst_dev_addr) 2142 { 2143 struct stedma40_chan_cfg *cfg = &chan->dma_cfg; 2144 struct stedma40_half_channel_info *src_info = &cfg->src_info; 2145 struct stedma40_half_channel_info *dst_info = &cfg->dst_info; 2146 unsigned long flags = 0; 2147 int ret; 2148 2149 if (desc->cyclic) 2150 flags |= LLI_CYCLIC | LLI_TERM_INT; 2151 2152 ret = d40_phy_sg_to_lli(sg_src, sg_len, src_dev_addr, 2153 desc->lli_phy.src, 2154 virt_to_phys(desc->lli_phy.src), 2155 chan->src_def_cfg, 2156 src_info, dst_info, flags); 2157 2158 ret = d40_phy_sg_to_lli(sg_dst, sg_len, dst_dev_addr, 2159 desc->lli_phy.dst, 2160 virt_to_phys(desc->lli_phy.dst), 2161 chan->dst_def_cfg, 2162 dst_info, src_info, flags); 2163 2164 dma_sync_single_for_device(chan->base->dev, desc->lli_pool.dma_addr, 2165 desc->lli_pool.size, DMA_TO_DEVICE); 2166 2167 return ret < 0 ? ret : 0; 2168 } 2169 2170 static struct d40_desc * 2171 d40_prep_desc(struct d40_chan *chan, struct scatterlist *sg, 2172 unsigned int sg_len, unsigned long dma_flags) 2173 { 2174 struct stedma40_chan_cfg *cfg; 2175 struct d40_desc *desc; 2176 int ret; 2177 2178 desc = d40_desc_get(chan); 2179 if (!desc) 2180 return NULL; 2181 2182 cfg = &chan->dma_cfg; 2183 desc->lli_len = d40_sg_2_dmalen(sg, sg_len, cfg->src_info.data_width, 2184 cfg->dst_info.data_width); 2185 if (desc->lli_len < 0) { 2186 chan_err(chan, "Unaligned size\n"); 2187 goto free_desc; 2188 } 2189 2190 ret = d40_pool_lli_alloc(chan, desc, desc->lli_len); 2191 if (ret < 0) { 2192 chan_err(chan, "Could not allocate lli\n"); 2193 goto free_desc; 2194 } 2195 2196 desc->lli_current = 0; 2197 desc->txd.flags = dma_flags; 2198 desc->txd.tx_submit = d40_tx_submit; 2199 2200 dma_async_tx_descriptor_init(&desc->txd, &chan->chan); 2201 2202 return desc; 2203 free_desc: 2204 d40_desc_free(chan, desc); 2205 return NULL; 2206 } 2207 2208 static struct dma_async_tx_descriptor * 2209 d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src, 2210 struct scatterlist *sg_dst, unsigned int sg_len, 2211 enum dma_transfer_direction direction, unsigned long dma_flags) 2212 { 2213 struct d40_chan *chan = container_of(dchan, struct d40_chan, chan); 2214 dma_addr_t src_dev_addr; 2215 dma_addr_t dst_dev_addr; 2216 struct d40_desc *desc; 2217 unsigned long flags; 2218 int ret; 2219 2220 if (!chan->phy_chan) { 2221 chan_err(chan, "Cannot prepare unallocated channel\n"); 2222 return NULL; 2223 } 2224 2225 d40_set_runtime_config_write(dchan, &chan->slave_config, direction); 2226 2227 spin_lock_irqsave(&chan->lock, flags); 2228 2229 desc = d40_prep_desc(chan, sg_src, sg_len, dma_flags); 2230 if (desc == NULL) 2231 goto unlock; 2232 2233 if (sg_next(&sg_src[sg_len - 1]) == sg_src) 2234 desc->cyclic = true; 2235 2236 src_dev_addr = 0; 2237 dst_dev_addr = 0; 2238 if (direction == DMA_DEV_TO_MEM) 2239 src_dev_addr = chan->runtime_addr; 2240 else if (direction == DMA_MEM_TO_DEV) 2241 dst_dev_addr = chan->runtime_addr; 2242 2243 if (chan_is_logical(chan)) 2244 ret = d40_prep_sg_log(chan, desc, sg_src, sg_dst, 2245 sg_len, src_dev_addr, dst_dev_addr); 2246 else 2247 ret = d40_prep_sg_phy(chan, desc, sg_src, sg_dst, 2248 sg_len, src_dev_addr, dst_dev_addr); 2249 2250 if (ret) { 2251 chan_err(chan, "Failed to prepare %s sg job: %d\n", 2252 chan_is_logical(chan) ? "log" : "phy", ret); 2253 goto free_desc; 2254 } 2255 2256 /* 2257 * add descriptor to the prepare queue in order to be able 2258 * to free them later in terminate_all 2259 */ 2260 list_add_tail(&desc->node, &chan->prepare_queue); 2261 2262 spin_unlock_irqrestore(&chan->lock, flags); 2263 2264 return &desc->txd; 2265 free_desc: 2266 d40_desc_free(chan, desc); 2267 unlock: 2268 spin_unlock_irqrestore(&chan->lock, flags); 2269 return NULL; 2270 } 2271 2272 bool stedma40_filter(struct dma_chan *chan, void *data) 2273 { 2274 struct stedma40_chan_cfg *info = data; 2275 struct d40_chan *d40c = 2276 container_of(chan, struct d40_chan, chan); 2277 int err; 2278 2279 if (data) { 2280 err = d40_validate_conf(d40c, info); 2281 if (!err) 2282 d40c->dma_cfg = *info; 2283 } else 2284 err = d40_config_memcpy(d40c); 2285 2286 if (!err) 2287 d40c->configured = true; 2288 2289 return err == 0; 2290 } 2291 EXPORT_SYMBOL(stedma40_filter); 2292 2293 static void __d40_set_prio_rt(struct d40_chan *d40c, int dev_type, bool src) 2294 { 2295 bool realtime = d40c->dma_cfg.realtime; 2296 bool highprio = d40c->dma_cfg.high_priority; 2297 u32 rtreg; 2298 u32 event = D40_TYPE_TO_EVENT(dev_type); 2299 u32 group = D40_TYPE_TO_GROUP(dev_type); 2300 u32 bit = BIT(event); 2301 u32 prioreg; 2302 struct d40_gen_dmac *dmac = &d40c->base->gen_dmac; 2303 2304 rtreg = realtime ? dmac->realtime_en : dmac->realtime_clear; 2305 /* 2306 * Due to a hardware bug, in some cases a logical channel triggered by 2307 * a high priority destination event line can generate extra packet 2308 * transactions. 2309 * 2310 * The workaround is to not set the high priority level for the 2311 * destination event lines that trigger logical channels. 2312 */ 2313 if (!src && chan_is_logical(d40c)) 2314 highprio = false; 2315 2316 prioreg = highprio ? dmac->high_prio_en : dmac->high_prio_clear; 2317 2318 /* Destination event lines are stored in the upper halfword */ 2319 if (!src) 2320 bit <<= 16; 2321 2322 writel(bit, d40c->base->virtbase + prioreg + group * 4); 2323 writel(bit, d40c->base->virtbase + rtreg + group * 4); 2324 } 2325 2326 static void d40_set_prio_realtime(struct d40_chan *d40c) 2327 { 2328 if (d40c->base->rev < 3) 2329 return; 2330 2331 if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) || 2332 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) 2333 __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true); 2334 2335 if ((d40c->dma_cfg.dir == DMA_MEM_TO_DEV) || 2336 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) 2337 __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false); 2338 } 2339 2340 #define D40_DT_FLAGS_MODE(flags) ((flags >> 0) & 0x1) 2341 #define D40_DT_FLAGS_DIR(flags) ((flags >> 1) & 0x1) 2342 #define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1) 2343 #define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1) 2344 #define D40_DT_FLAGS_HIGH_PRIO(flags) ((flags >> 4) & 0x1) 2345 2346 static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec, 2347 struct of_dma *ofdma) 2348 { 2349 struct stedma40_chan_cfg cfg; 2350 dma_cap_mask_t cap; 2351 u32 flags; 2352 2353 memset(&cfg, 0, sizeof(struct stedma40_chan_cfg)); 2354 2355 dma_cap_zero(cap); 2356 dma_cap_set(DMA_SLAVE, cap); 2357 2358 cfg.dev_type = dma_spec->args[0]; 2359 flags = dma_spec->args[2]; 2360 2361 switch (D40_DT_FLAGS_MODE(flags)) { 2362 case 0: cfg.mode = STEDMA40_MODE_LOGICAL; break; 2363 case 1: cfg.mode = STEDMA40_MODE_PHYSICAL; break; 2364 } 2365 2366 switch (D40_DT_FLAGS_DIR(flags)) { 2367 case 0: 2368 cfg.dir = DMA_MEM_TO_DEV; 2369 cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags); 2370 break; 2371 case 1: 2372 cfg.dir = DMA_DEV_TO_MEM; 2373 cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags); 2374 break; 2375 } 2376 2377 if (D40_DT_FLAGS_FIXED_CHAN(flags)) { 2378 cfg.phy_channel = dma_spec->args[1]; 2379 cfg.use_fixed_channel = true; 2380 } 2381 2382 if (D40_DT_FLAGS_HIGH_PRIO(flags)) 2383 cfg.high_priority = true; 2384 2385 return dma_request_channel(cap, stedma40_filter, &cfg); 2386 } 2387 2388 /* DMA ENGINE functions */ 2389 static int d40_alloc_chan_resources(struct dma_chan *chan) 2390 { 2391 int err; 2392 unsigned long flags; 2393 struct d40_chan *d40c = 2394 container_of(chan, struct d40_chan, chan); 2395 bool is_free_phy; 2396 spin_lock_irqsave(&d40c->lock, flags); 2397 2398 dma_cookie_init(chan); 2399 2400 /* If no dma configuration is set use default configuration (memcpy) */ 2401 if (!d40c->configured) { 2402 err = d40_config_memcpy(d40c); 2403 if (err) { 2404 chan_err(d40c, "Failed to configure memcpy channel\n"); 2405 goto mark_last_busy; 2406 } 2407 } 2408 2409 err = d40_allocate_channel(d40c, &is_free_phy); 2410 if (err) { 2411 chan_err(d40c, "Failed to allocate channel\n"); 2412 d40c->configured = false; 2413 goto mark_last_busy; 2414 } 2415 2416 pm_runtime_get_sync(d40c->base->dev); 2417 2418 d40_set_prio_realtime(d40c); 2419 2420 if (chan_is_logical(d40c)) { 2421 if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) 2422 d40c->lcpa = d40c->base->lcpa_base + 2423 d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE; 2424 else 2425 d40c->lcpa = d40c->base->lcpa_base + 2426 d40c->dma_cfg.dev_type * 2427 D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA; 2428 2429 /* Unmask the Global Interrupt Mask. */ 2430 d40c->src_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS); 2431 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS); 2432 } 2433 2434 dev_dbg(chan2dev(d40c), "allocated %s channel (phy %d%s)\n", 2435 chan_is_logical(d40c) ? "logical" : "physical", 2436 d40c->phy_chan->num, 2437 d40c->dma_cfg.use_fixed_channel ? ", fixed" : ""); 2438 2439 2440 /* 2441 * Only write channel configuration to the DMA if the physical 2442 * resource is free. In case of multiple logical channels 2443 * on the same physical resource, only the first write is necessary. 2444 */ 2445 if (is_free_phy) 2446 d40_config_write(d40c); 2447 mark_last_busy: 2448 pm_runtime_mark_last_busy(d40c->base->dev); 2449 pm_runtime_put_autosuspend(d40c->base->dev); 2450 spin_unlock_irqrestore(&d40c->lock, flags); 2451 return err; 2452 } 2453 2454 static void d40_free_chan_resources(struct dma_chan *chan) 2455 { 2456 struct d40_chan *d40c = 2457 container_of(chan, struct d40_chan, chan); 2458 int err; 2459 unsigned long flags; 2460 2461 if (d40c->phy_chan == NULL) { 2462 chan_err(d40c, "Cannot free unallocated channel\n"); 2463 return; 2464 } 2465 2466 spin_lock_irqsave(&d40c->lock, flags); 2467 2468 err = d40_free_dma(d40c); 2469 2470 if (err) 2471 chan_err(d40c, "Failed to free channel\n"); 2472 spin_unlock_irqrestore(&d40c->lock, flags); 2473 } 2474 2475 static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, 2476 dma_addr_t dst, 2477 dma_addr_t src, 2478 size_t size, 2479 unsigned long dma_flags) 2480 { 2481 struct scatterlist dst_sg; 2482 struct scatterlist src_sg; 2483 2484 sg_init_table(&dst_sg, 1); 2485 sg_init_table(&src_sg, 1); 2486 2487 sg_dma_address(&dst_sg) = dst; 2488 sg_dma_address(&src_sg) = src; 2489 2490 sg_dma_len(&dst_sg) = size; 2491 sg_dma_len(&src_sg) = size; 2492 2493 return d40_prep_sg(chan, &src_sg, &dst_sg, 1, 2494 DMA_MEM_TO_MEM, dma_flags); 2495 } 2496 2497 static struct dma_async_tx_descriptor * 2498 d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, 2499 unsigned int sg_len, enum dma_transfer_direction direction, 2500 unsigned long dma_flags, void *context) 2501 { 2502 if (!is_slave_direction(direction)) 2503 return NULL; 2504 2505 return d40_prep_sg(chan, sgl, sgl, sg_len, direction, dma_flags); 2506 } 2507 2508 static struct dma_async_tx_descriptor * 2509 dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr, 2510 size_t buf_len, size_t period_len, 2511 enum dma_transfer_direction direction, unsigned long flags) 2512 { 2513 unsigned int periods = buf_len / period_len; 2514 struct dma_async_tx_descriptor *txd; 2515 struct scatterlist *sg; 2516 int i; 2517 2518 sg = kcalloc(periods + 1, sizeof(struct scatterlist), GFP_NOWAIT); 2519 if (!sg) 2520 return NULL; 2521 2522 for (i = 0; i < periods; i++) { 2523 sg_dma_address(&sg[i]) = dma_addr; 2524 sg_dma_len(&sg[i]) = period_len; 2525 dma_addr += period_len; 2526 } 2527 2528 sg_chain(sg, periods + 1, sg); 2529 2530 txd = d40_prep_sg(chan, sg, sg, periods, direction, 2531 DMA_PREP_INTERRUPT); 2532 2533 kfree(sg); 2534 2535 return txd; 2536 } 2537 2538 static enum dma_status d40_tx_status(struct dma_chan *chan, 2539 dma_cookie_t cookie, 2540 struct dma_tx_state *txstate) 2541 { 2542 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 2543 enum dma_status ret; 2544 2545 if (d40c->phy_chan == NULL) { 2546 chan_err(d40c, "Cannot read status of unallocated channel\n"); 2547 return -EINVAL; 2548 } 2549 2550 ret = dma_cookie_status(chan, cookie, txstate); 2551 if (ret != DMA_COMPLETE && txstate) 2552 dma_set_residue(txstate, stedma40_residue(chan)); 2553 2554 if (d40_is_paused(d40c)) 2555 ret = DMA_PAUSED; 2556 2557 return ret; 2558 } 2559 2560 static void d40_issue_pending(struct dma_chan *chan) 2561 { 2562 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 2563 unsigned long flags; 2564 2565 if (d40c->phy_chan == NULL) { 2566 chan_err(d40c, "Channel is not allocated!\n"); 2567 return; 2568 } 2569 2570 spin_lock_irqsave(&d40c->lock, flags); 2571 2572 list_splice_tail_init(&d40c->pending_queue, &d40c->queue); 2573 2574 /* Busy means that queued jobs are already being processed */ 2575 if (!d40c->busy) 2576 (void) d40_queue_start(d40c); 2577 2578 spin_unlock_irqrestore(&d40c->lock, flags); 2579 } 2580 2581 static int d40_terminate_all(struct dma_chan *chan) 2582 { 2583 unsigned long flags; 2584 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 2585 int ret; 2586 2587 if (d40c->phy_chan == NULL) { 2588 chan_err(d40c, "Channel is not allocated!\n"); 2589 return -EINVAL; 2590 } 2591 2592 spin_lock_irqsave(&d40c->lock, flags); 2593 2594 pm_runtime_get_sync(d40c->base->dev); 2595 ret = d40_channel_execute_command(d40c, D40_DMA_STOP); 2596 if (ret) 2597 chan_err(d40c, "Failed to stop channel\n"); 2598 2599 d40_term_all(d40c); 2600 pm_runtime_mark_last_busy(d40c->base->dev); 2601 pm_runtime_put_autosuspend(d40c->base->dev); 2602 if (d40c->busy) { 2603 pm_runtime_mark_last_busy(d40c->base->dev); 2604 pm_runtime_put_autosuspend(d40c->base->dev); 2605 } 2606 d40c->busy = false; 2607 2608 spin_unlock_irqrestore(&d40c->lock, flags); 2609 return 0; 2610 } 2611 2612 static int 2613 dma40_config_to_halfchannel(struct d40_chan *d40c, 2614 struct stedma40_half_channel_info *info, 2615 u32 maxburst) 2616 { 2617 int psize; 2618 2619 if (chan_is_logical(d40c)) { 2620 if (maxburst >= 16) 2621 psize = STEDMA40_PSIZE_LOG_16; 2622 else if (maxburst >= 8) 2623 psize = STEDMA40_PSIZE_LOG_8; 2624 else if (maxburst >= 4) 2625 psize = STEDMA40_PSIZE_LOG_4; 2626 else 2627 psize = STEDMA40_PSIZE_LOG_1; 2628 } else { 2629 if (maxburst >= 16) 2630 psize = STEDMA40_PSIZE_PHY_16; 2631 else if (maxburst >= 8) 2632 psize = STEDMA40_PSIZE_PHY_8; 2633 else if (maxburst >= 4) 2634 psize = STEDMA40_PSIZE_PHY_4; 2635 else 2636 psize = STEDMA40_PSIZE_PHY_1; 2637 } 2638 2639 info->psize = psize; 2640 info->flow_ctrl = STEDMA40_NO_FLOW_CTRL; 2641 2642 return 0; 2643 } 2644 2645 static int d40_set_runtime_config(struct dma_chan *chan, 2646 struct dma_slave_config *config) 2647 { 2648 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 2649 2650 memcpy(&d40c->slave_config, config, sizeof(*config)); 2651 2652 return 0; 2653 } 2654 2655 /* Runtime reconfiguration extension */ 2656 static int d40_set_runtime_config_write(struct dma_chan *chan, 2657 struct dma_slave_config *config, 2658 enum dma_transfer_direction direction) 2659 { 2660 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); 2661 struct stedma40_chan_cfg *cfg = &d40c->dma_cfg; 2662 enum dma_slave_buswidth src_addr_width, dst_addr_width; 2663 dma_addr_t config_addr; 2664 u32 src_maxburst, dst_maxburst; 2665 int ret; 2666 2667 if (d40c->phy_chan == NULL) { 2668 chan_err(d40c, "Channel is not allocated!\n"); 2669 return -EINVAL; 2670 } 2671 2672 src_addr_width = config->src_addr_width; 2673 src_maxburst = config->src_maxburst; 2674 dst_addr_width = config->dst_addr_width; 2675 dst_maxburst = config->dst_maxburst; 2676 2677 if (direction == DMA_DEV_TO_MEM) { 2678 config_addr = config->src_addr; 2679 2680 if (cfg->dir != DMA_DEV_TO_MEM) 2681 dev_dbg(d40c->base->dev, 2682 "channel was not configured for peripheral " 2683 "to memory transfer (%d) overriding\n", 2684 cfg->dir); 2685 cfg->dir = DMA_DEV_TO_MEM; 2686 2687 /* Configure the memory side */ 2688 if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) 2689 dst_addr_width = src_addr_width; 2690 if (dst_maxburst == 0) 2691 dst_maxburst = src_maxburst; 2692 2693 } else if (direction == DMA_MEM_TO_DEV) { 2694 config_addr = config->dst_addr; 2695 2696 if (cfg->dir != DMA_MEM_TO_DEV) 2697 dev_dbg(d40c->base->dev, 2698 "channel was not configured for memory " 2699 "to peripheral transfer (%d) overriding\n", 2700 cfg->dir); 2701 cfg->dir = DMA_MEM_TO_DEV; 2702 2703 /* Configure the memory side */ 2704 if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) 2705 src_addr_width = dst_addr_width; 2706 if (src_maxburst == 0) 2707 src_maxburst = dst_maxburst; 2708 } else { 2709 dev_err(d40c->base->dev, 2710 "unrecognized channel direction %d\n", 2711 direction); 2712 return -EINVAL; 2713 } 2714 2715 if (config_addr <= 0) { 2716 dev_err(d40c->base->dev, "no address supplied\n"); 2717 return -EINVAL; 2718 } 2719 2720 if (src_maxburst * src_addr_width != dst_maxburst * dst_addr_width) { 2721 dev_err(d40c->base->dev, 2722 "src/dst width/maxburst mismatch: %d*%d != %d*%d\n", 2723 src_maxburst, 2724 src_addr_width, 2725 dst_maxburst, 2726 dst_addr_width); 2727 return -EINVAL; 2728 } 2729 2730 if (src_maxburst > 16) { 2731 src_maxburst = 16; 2732 dst_maxburst = src_maxburst * src_addr_width / dst_addr_width; 2733 } else if (dst_maxburst > 16) { 2734 dst_maxburst = 16; 2735 src_maxburst = dst_maxburst * dst_addr_width / src_addr_width; 2736 } 2737 2738 /* Only valid widths are; 1, 2, 4 and 8. */ 2739 if (src_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED || 2740 src_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES || 2741 dst_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED || 2742 dst_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES || 2743 !is_power_of_2(src_addr_width) || 2744 !is_power_of_2(dst_addr_width)) 2745 return -EINVAL; 2746 2747 cfg->src_info.data_width = src_addr_width; 2748 cfg->dst_info.data_width = dst_addr_width; 2749 2750 ret = dma40_config_to_halfchannel(d40c, &cfg->src_info, 2751 src_maxburst); 2752 if (ret) 2753 return ret; 2754 2755 ret = dma40_config_to_halfchannel(d40c, &cfg->dst_info, 2756 dst_maxburst); 2757 if (ret) 2758 return ret; 2759 2760 /* Fill in register values */ 2761 if (chan_is_logical(d40c)) 2762 d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3); 2763 else 2764 d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg); 2765 2766 /* These settings will take precedence later */ 2767 d40c->runtime_addr = config_addr; 2768 d40c->runtime_direction = direction; 2769 dev_dbg(d40c->base->dev, 2770 "configured channel %s for %s, data width %d/%d, " 2771 "maxburst %d/%d elements, LE, no flow control\n", 2772 dma_chan_name(chan), 2773 (direction == DMA_DEV_TO_MEM) ? "RX" : "TX", 2774 src_addr_width, dst_addr_width, 2775 src_maxburst, dst_maxburst); 2776 2777 return 0; 2778 } 2779 2780 /* Initialization functions */ 2781 2782 static void __init d40_chan_init(struct d40_base *base, struct dma_device *dma, 2783 struct d40_chan *chans, int offset, 2784 int num_chans) 2785 { 2786 int i = 0; 2787 struct d40_chan *d40c; 2788 2789 INIT_LIST_HEAD(&dma->channels); 2790 2791 for (i = offset; i < offset + num_chans; i++) { 2792 d40c = &chans[i]; 2793 d40c->base = base; 2794 d40c->chan.device = dma; 2795 2796 spin_lock_init(&d40c->lock); 2797 2798 d40c->log_num = D40_PHY_CHAN; 2799 2800 INIT_LIST_HEAD(&d40c->done); 2801 INIT_LIST_HEAD(&d40c->active); 2802 INIT_LIST_HEAD(&d40c->queue); 2803 INIT_LIST_HEAD(&d40c->pending_queue); 2804 INIT_LIST_HEAD(&d40c->client); 2805 INIT_LIST_HEAD(&d40c->prepare_queue); 2806 2807 tasklet_init(&d40c->tasklet, dma_tasklet, 2808 (unsigned long) d40c); 2809 2810 list_add_tail(&d40c->chan.device_node, 2811 &dma->channels); 2812 } 2813 } 2814 2815 static void d40_ops_init(struct d40_base *base, struct dma_device *dev) 2816 { 2817 if (dma_has_cap(DMA_SLAVE, dev->cap_mask)) { 2818 dev->device_prep_slave_sg = d40_prep_slave_sg; 2819 dev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); 2820 } 2821 2822 if (dma_has_cap(DMA_MEMCPY, dev->cap_mask)) { 2823 dev->device_prep_dma_memcpy = d40_prep_memcpy; 2824 dev->directions = BIT(DMA_MEM_TO_MEM); 2825 /* 2826 * This controller can only access address at even 2827 * 32bit boundaries, i.e. 2^2 2828 */ 2829 dev->copy_align = DMAENGINE_ALIGN_4_BYTES; 2830 } 2831 2832 if (dma_has_cap(DMA_CYCLIC, dev->cap_mask)) 2833 dev->device_prep_dma_cyclic = dma40_prep_dma_cyclic; 2834 2835 dev->device_alloc_chan_resources = d40_alloc_chan_resources; 2836 dev->device_free_chan_resources = d40_free_chan_resources; 2837 dev->device_issue_pending = d40_issue_pending; 2838 dev->device_tx_status = d40_tx_status; 2839 dev->device_config = d40_set_runtime_config; 2840 dev->device_pause = d40_pause; 2841 dev->device_resume = d40_resume; 2842 dev->device_terminate_all = d40_terminate_all; 2843 dev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; 2844 dev->dev = base->dev; 2845 } 2846 2847 static int __init d40_dmaengine_init(struct d40_base *base, 2848 int num_reserved_chans) 2849 { 2850 int err ; 2851 2852 d40_chan_init(base, &base->dma_slave, base->log_chans, 2853 0, base->num_log_chans); 2854 2855 dma_cap_zero(base->dma_slave.cap_mask); 2856 dma_cap_set(DMA_SLAVE, base->dma_slave.cap_mask); 2857 dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask); 2858 2859 d40_ops_init(base, &base->dma_slave); 2860 2861 err = dmaenginem_async_device_register(&base->dma_slave); 2862 2863 if (err) { 2864 d40_err(base->dev, "Failed to register slave channels\n"); 2865 goto exit; 2866 } 2867 2868 d40_chan_init(base, &base->dma_memcpy, base->log_chans, 2869 base->num_log_chans, base->num_memcpy_chans); 2870 2871 dma_cap_zero(base->dma_memcpy.cap_mask); 2872 dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask); 2873 2874 d40_ops_init(base, &base->dma_memcpy); 2875 2876 err = dmaenginem_async_device_register(&base->dma_memcpy); 2877 2878 if (err) { 2879 d40_err(base->dev, 2880 "Failed to register memcpy only channels\n"); 2881 goto exit; 2882 } 2883 2884 d40_chan_init(base, &base->dma_both, base->phy_chans, 2885 0, num_reserved_chans); 2886 2887 dma_cap_zero(base->dma_both.cap_mask); 2888 dma_cap_set(DMA_SLAVE, base->dma_both.cap_mask); 2889 dma_cap_set(DMA_MEMCPY, base->dma_both.cap_mask); 2890 dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask); 2891 2892 d40_ops_init(base, &base->dma_both); 2893 err = dmaenginem_async_device_register(&base->dma_both); 2894 2895 if (err) { 2896 d40_err(base->dev, 2897 "Failed to register logical and physical capable channels\n"); 2898 goto exit; 2899 } 2900 return 0; 2901 exit: 2902 return err; 2903 } 2904 2905 /* Suspend resume functionality */ 2906 #ifdef CONFIG_PM_SLEEP 2907 static int dma40_suspend(struct device *dev) 2908 { 2909 struct d40_base *base = dev_get_drvdata(dev); 2910 int ret; 2911 2912 ret = pm_runtime_force_suspend(dev); 2913 if (ret) 2914 return ret; 2915 2916 if (base->lcpa_regulator) 2917 ret = regulator_disable(base->lcpa_regulator); 2918 return ret; 2919 } 2920 2921 static int dma40_resume(struct device *dev) 2922 { 2923 struct d40_base *base = dev_get_drvdata(dev); 2924 int ret = 0; 2925 2926 if (base->lcpa_regulator) { 2927 ret = regulator_enable(base->lcpa_regulator); 2928 if (ret) 2929 return ret; 2930 } 2931 2932 return pm_runtime_force_resume(dev); 2933 } 2934 #endif 2935 2936 #ifdef CONFIG_PM 2937 static void dma40_backup(void __iomem *baseaddr, u32 *backup, 2938 u32 *regaddr, int num, bool save) 2939 { 2940 int i; 2941 2942 for (i = 0; i < num; i++) { 2943 void __iomem *addr = baseaddr + regaddr[i]; 2944 2945 if (save) 2946 backup[i] = readl_relaxed(addr); 2947 else 2948 writel_relaxed(backup[i], addr); 2949 } 2950 } 2951 2952 static void d40_save_restore_registers(struct d40_base *base, bool save) 2953 { 2954 int i; 2955 2956 /* Save/Restore channel specific registers */ 2957 for (i = 0; i < base->num_phy_chans; i++) { 2958 void __iomem *addr; 2959 int idx; 2960 2961 if (base->phy_res[i].reserved) 2962 continue; 2963 2964 addr = base->virtbase + D40_DREG_PCBASE + i * D40_DREG_PCDELTA; 2965 idx = i * ARRAY_SIZE(d40_backup_regs_chan); 2966 2967 dma40_backup(addr, &base->reg_val_backup_chan[idx], 2968 d40_backup_regs_chan, 2969 ARRAY_SIZE(d40_backup_regs_chan), 2970 save); 2971 } 2972 2973 /* Save/Restore global registers */ 2974 dma40_backup(base->virtbase, base->reg_val_backup, 2975 d40_backup_regs, ARRAY_SIZE(d40_backup_regs), 2976 save); 2977 2978 /* Save/Restore registers only existing on dma40 v3 and later */ 2979 if (base->gen_dmac.backup) 2980 dma40_backup(base->virtbase, base->reg_val_backup_v4, 2981 base->gen_dmac.backup, 2982 base->gen_dmac.backup_size, 2983 save); 2984 } 2985 2986 static int dma40_runtime_suspend(struct device *dev) 2987 { 2988 struct d40_base *base = dev_get_drvdata(dev); 2989 2990 d40_save_restore_registers(base, true); 2991 2992 /* Don't disable/enable clocks for v1 due to HW bugs */ 2993 if (base->rev != 1) 2994 writel_relaxed(base->gcc_pwr_off_mask, 2995 base->virtbase + D40_DREG_GCC); 2996 2997 return 0; 2998 } 2999 3000 static int dma40_runtime_resume(struct device *dev) 3001 { 3002 struct d40_base *base = dev_get_drvdata(dev); 3003 3004 d40_save_restore_registers(base, false); 3005 3006 writel_relaxed(D40_DREG_GCC_ENABLE_ALL, 3007 base->virtbase + D40_DREG_GCC); 3008 return 0; 3009 } 3010 #endif 3011 3012 static const struct dev_pm_ops dma40_pm_ops = { 3013 SET_LATE_SYSTEM_SLEEP_PM_OPS(dma40_suspend, dma40_resume) 3014 SET_RUNTIME_PM_OPS(dma40_runtime_suspend, 3015 dma40_runtime_resume, 3016 NULL) 3017 }; 3018 3019 /* Initialization functions. */ 3020 3021 static int __init d40_phy_res_init(struct d40_base *base) 3022 { 3023 int i; 3024 int num_phy_chans_avail = 0; 3025 u32 val[2]; 3026 int odd_even_bit = -2; 3027 int gcc = D40_DREG_GCC_ENA; 3028 3029 val[0] = readl(base->virtbase + D40_DREG_PRSME); 3030 val[1] = readl(base->virtbase + D40_DREG_PRSMO); 3031 3032 for (i = 0; i < base->num_phy_chans; i++) { 3033 base->phy_res[i].num = i; 3034 odd_even_bit += 2 * ((i % 2) == 0); 3035 if (((val[i % 2] >> odd_even_bit) & 3) == 1) { 3036 /* Mark security only channels as occupied */ 3037 base->phy_res[i].allocated_src = D40_ALLOC_PHY; 3038 base->phy_res[i].allocated_dst = D40_ALLOC_PHY; 3039 base->phy_res[i].reserved = true; 3040 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i), 3041 D40_DREG_GCC_SRC); 3042 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i), 3043 D40_DREG_GCC_DST); 3044 3045 3046 } else { 3047 base->phy_res[i].allocated_src = D40_ALLOC_FREE; 3048 base->phy_res[i].allocated_dst = D40_ALLOC_FREE; 3049 base->phy_res[i].reserved = false; 3050 num_phy_chans_avail++; 3051 } 3052 spin_lock_init(&base->phy_res[i].lock); 3053 } 3054 3055 /* Mark disabled channels as occupied */ 3056 for (i = 0; base->plat_data->disabled_channels[i] != -1; i++) { 3057 int chan = base->plat_data->disabled_channels[i]; 3058 3059 base->phy_res[chan].allocated_src = D40_ALLOC_PHY; 3060 base->phy_res[chan].allocated_dst = D40_ALLOC_PHY; 3061 base->phy_res[chan].reserved = true; 3062 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan), 3063 D40_DREG_GCC_SRC); 3064 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan), 3065 D40_DREG_GCC_DST); 3066 num_phy_chans_avail--; 3067 } 3068 3069 /* Mark soft_lli channels */ 3070 for (i = 0; i < base->plat_data->num_of_soft_lli_chans; i++) { 3071 int chan = base->plat_data->soft_lli_chans[i]; 3072 3073 base->phy_res[chan].use_soft_lli = true; 3074 } 3075 3076 dev_info(base->dev, "%d of %d physical DMA channels available\n", 3077 num_phy_chans_avail, base->num_phy_chans); 3078 3079 /* Verify settings extended vs standard */ 3080 val[0] = readl(base->virtbase + D40_DREG_PRTYP); 3081 3082 for (i = 0; i < base->num_phy_chans; i++) { 3083 3084 if (base->phy_res[i].allocated_src == D40_ALLOC_FREE && 3085 (val[0] & 0x3) != 1) 3086 dev_info(base->dev, 3087 "[%s] INFO: channel %d is misconfigured (%d)\n", 3088 __func__, i, val[0] & 0x3); 3089 3090 val[0] = val[0] >> 2; 3091 } 3092 3093 /* 3094 * To keep things simple, Enable all clocks initially. 3095 * The clocks will get managed later post channel allocation. 3096 * The clocks for the event lines on which reserved channels exists 3097 * are not managed here. 3098 */ 3099 writel(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC); 3100 base->gcc_pwr_off_mask = gcc; 3101 3102 return num_phy_chans_avail; 3103 } 3104 3105 static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) 3106 { 3107 struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev); 3108 struct clk *clk; 3109 void __iomem *virtbase; 3110 struct resource *res; 3111 struct d40_base *base; 3112 int num_log_chans; 3113 int num_phy_chans; 3114 int num_memcpy_chans; 3115 int clk_ret = -EINVAL; 3116 int i; 3117 u32 pid; 3118 u32 cid; 3119 u8 rev; 3120 3121 clk = clk_get(&pdev->dev, NULL); 3122 if (IS_ERR(clk)) { 3123 d40_err(&pdev->dev, "No matching clock found\n"); 3124 goto check_prepare_enabled; 3125 } 3126 3127 clk_ret = clk_prepare_enable(clk); 3128 if (clk_ret) { 3129 d40_err(&pdev->dev, "Failed to prepare/enable clock\n"); 3130 goto disable_unprepare; 3131 } 3132 3133 /* Get IO for DMAC base address */ 3134 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "base"); 3135 if (!res) 3136 goto disable_unprepare; 3137 3138 if (request_mem_region(res->start, resource_size(res), 3139 D40_NAME " I/O base") == NULL) 3140 goto release_region; 3141 3142 virtbase = ioremap(res->start, resource_size(res)); 3143 if (!virtbase) 3144 goto release_region; 3145 3146 /* This is just a regular AMBA PrimeCell ID actually */ 3147 for (pid = 0, i = 0; i < 4; i++) 3148 pid |= (readl(virtbase + resource_size(res) - 0x20 + 4 * i) 3149 & 255) << (i * 8); 3150 for (cid = 0, i = 0; i < 4; i++) 3151 cid |= (readl(virtbase + resource_size(res) - 0x10 + 4 * i) 3152 & 255) << (i * 8); 3153 3154 if (cid != AMBA_CID) { 3155 d40_err(&pdev->dev, "Unknown hardware! No PrimeCell ID\n"); 3156 goto unmap_io; 3157 } 3158 if (AMBA_MANF_BITS(pid) != AMBA_VENDOR_ST) { 3159 d40_err(&pdev->dev, "Unknown designer! Got %x wanted %x\n", 3160 AMBA_MANF_BITS(pid), 3161 AMBA_VENDOR_ST); 3162 goto unmap_io; 3163 } 3164 /* 3165 * HW revision: 3166 * DB8500ed has revision 0 3167 * ? has revision 1 3168 * DB8500v1 has revision 2 3169 * DB8500v2 has revision 3 3170 * AP9540v1 has revision 4 3171 * DB8540v1 has revision 4 3172 */ 3173 rev = AMBA_REV_BITS(pid); 3174 if (rev < 2) { 3175 d40_err(&pdev->dev, "hardware revision: %d is not supported", rev); 3176 goto unmap_io; 3177 } 3178 3179 /* The number of physical channels on this HW */ 3180 if (plat_data->num_of_phy_chans) 3181 num_phy_chans = plat_data->num_of_phy_chans; 3182 else 3183 num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4; 3184 3185 /* The number of channels used for memcpy */ 3186 if (plat_data->num_of_memcpy_chans) 3187 num_memcpy_chans = plat_data->num_of_memcpy_chans; 3188 else 3189 num_memcpy_chans = ARRAY_SIZE(dma40_memcpy_channels); 3190 3191 num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY; 3192 3193 dev_info(&pdev->dev, 3194 "hardware rev: %d @ %pa with %d physical and %d logical channels\n", 3195 rev, &res->start, num_phy_chans, num_log_chans); 3196 3197 base = kzalloc(ALIGN(sizeof(struct d40_base), 4) + 3198 (num_phy_chans + num_log_chans + num_memcpy_chans) * 3199 sizeof(struct d40_chan), GFP_KERNEL); 3200 3201 if (base == NULL) 3202 goto unmap_io; 3203 3204 base->rev = rev; 3205 base->clk = clk; 3206 base->num_memcpy_chans = num_memcpy_chans; 3207 base->num_phy_chans = num_phy_chans; 3208 base->num_log_chans = num_log_chans; 3209 base->phy_start = res->start; 3210 base->phy_size = resource_size(res); 3211 base->virtbase = virtbase; 3212 base->plat_data = plat_data; 3213 base->dev = &pdev->dev; 3214 base->phy_chans = ((void *)base) + ALIGN(sizeof(struct d40_base), 4); 3215 base->log_chans = &base->phy_chans[num_phy_chans]; 3216 3217 if (base->plat_data->num_of_phy_chans == 14) { 3218 base->gen_dmac.backup = d40_backup_regs_v4b; 3219 base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4B; 3220 base->gen_dmac.interrupt_en = D40_DREG_CPCMIS; 3221 base->gen_dmac.interrupt_clear = D40_DREG_CPCICR; 3222 base->gen_dmac.realtime_en = D40_DREG_CRSEG1; 3223 base->gen_dmac.realtime_clear = D40_DREG_CRCEG1; 3224 base->gen_dmac.high_prio_en = D40_DREG_CPSEG1; 3225 base->gen_dmac.high_prio_clear = D40_DREG_CPCEG1; 3226 base->gen_dmac.il = il_v4b; 3227 base->gen_dmac.il_size = ARRAY_SIZE(il_v4b); 3228 base->gen_dmac.init_reg = dma_init_reg_v4b; 3229 base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4b); 3230 } else { 3231 if (base->rev >= 3) { 3232 base->gen_dmac.backup = d40_backup_regs_v4a; 3233 base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4A; 3234 } 3235 base->gen_dmac.interrupt_en = D40_DREG_PCMIS; 3236 base->gen_dmac.interrupt_clear = D40_DREG_PCICR; 3237 base->gen_dmac.realtime_en = D40_DREG_RSEG1; 3238 base->gen_dmac.realtime_clear = D40_DREG_RCEG1; 3239 base->gen_dmac.high_prio_en = D40_DREG_PSEG1; 3240 base->gen_dmac.high_prio_clear = D40_DREG_PCEG1; 3241 base->gen_dmac.il = il_v4a; 3242 base->gen_dmac.il_size = ARRAY_SIZE(il_v4a); 3243 base->gen_dmac.init_reg = dma_init_reg_v4a; 3244 base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4a); 3245 } 3246 3247 base->phy_res = kcalloc(num_phy_chans, 3248 sizeof(*base->phy_res), 3249 GFP_KERNEL); 3250 if (!base->phy_res) 3251 goto free_base; 3252 3253 base->lookup_phy_chans = kcalloc(num_phy_chans, 3254 sizeof(*base->lookup_phy_chans), 3255 GFP_KERNEL); 3256 if (!base->lookup_phy_chans) 3257 goto free_phy_res; 3258 3259 base->lookup_log_chans = kcalloc(num_log_chans, 3260 sizeof(*base->lookup_log_chans), 3261 GFP_KERNEL); 3262 if (!base->lookup_log_chans) 3263 goto free_phy_chans; 3264 3265 base->reg_val_backup_chan = kmalloc_array(base->num_phy_chans, 3266 sizeof(d40_backup_regs_chan), 3267 GFP_KERNEL); 3268 if (!base->reg_val_backup_chan) 3269 goto free_log_chans; 3270 3271 base->lcla_pool.alloc_map = kcalloc(num_phy_chans 3272 * D40_LCLA_LINK_PER_EVENT_GRP, 3273 sizeof(*base->lcla_pool.alloc_map), 3274 GFP_KERNEL); 3275 if (!base->lcla_pool.alloc_map) 3276 goto free_backup_chan; 3277 3278 base->regs_interrupt = kmalloc_array(base->gen_dmac.il_size, 3279 sizeof(*base->regs_interrupt), 3280 GFP_KERNEL); 3281 if (!base->regs_interrupt) 3282 goto free_map; 3283 3284 base->desc_slab = kmem_cache_create(D40_NAME, sizeof(struct d40_desc), 3285 0, SLAB_HWCACHE_ALIGN, 3286 NULL); 3287 if (base->desc_slab == NULL) 3288 goto free_regs; 3289 3290 3291 return base; 3292 free_regs: 3293 kfree(base->regs_interrupt); 3294 free_map: 3295 kfree(base->lcla_pool.alloc_map); 3296 free_backup_chan: 3297 kfree(base->reg_val_backup_chan); 3298 free_log_chans: 3299 kfree(base->lookup_log_chans); 3300 free_phy_chans: 3301 kfree(base->lookup_phy_chans); 3302 free_phy_res: 3303 kfree(base->phy_res); 3304 free_base: 3305 kfree(base); 3306 unmap_io: 3307 iounmap(virtbase); 3308 release_region: 3309 release_mem_region(res->start, resource_size(res)); 3310 check_prepare_enabled: 3311 if (!clk_ret) 3312 disable_unprepare: 3313 clk_disable_unprepare(clk); 3314 if (!IS_ERR(clk)) 3315 clk_put(clk); 3316 return NULL; 3317 } 3318 3319 static void __init d40_hw_init(struct d40_base *base) 3320 { 3321 3322 int i; 3323 u32 prmseo[2] = {0, 0}; 3324 u32 activeo[2] = {0xFFFFFFFF, 0xFFFFFFFF}; 3325 u32 pcmis = 0; 3326 u32 pcicr = 0; 3327 struct d40_reg_val *dma_init_reg = base->gen_dmac.init_reg; 3328 u32 reg_size = base->gen_dmac.init_reg_size; 3329 3330 for (i = 0; i < reg_size; i++) 3331 writel(dma_init_reg[i].val, 3332 base->virtbase + dma_init_reg[i].reg); 3333 3334 /* Configure all our dma channels to default settings */ 3335 for (i = 0; i < base->num_phy_chans; i++) { 3336 3337 activeo[i % 2] = activeo[i % 2] << 2; 3338 3339 if (base->phy_res[base->num_phy_chans - i - 1].allocated_src 3340 == D40_ALLOC_PHY) { 3341 activeo[i % 2] |= 3; 3342 continue; 3343 } 3344 3345 /* Enable interrupt # */ 3346 pcmis = (pcmis << 1) | 1; 3347 3348 /* Clear interrupt # */ 3349 pcicr = (pcicr << 1) | 1; 3350 3351 /* Set channel to physical mode */ 3352 prmseo[i % 2] = prmseo[i % 2] << 2; 3353 prmseo[i % 2] |= 1; 3354 3355 } 3356 3357 writel(prmseo[1], base->virtbase + D40_DREG_PRMSE); 3358 writel(prmseo[0], base->virtbase + D40_DREG_PRMSO); 3359 writel(activeo[1], base->virtbase + D40_DREG_ACTIVE); 3360 writel(activeo[0], base->virtbase + D40_DREG_ACTIVO); 3361 3362 /* Write which interrupt to enable */ 3363 writel(pcmis, base->virtbase + base->gen_dmac.interrupt_en); 3364 3365 /* Write which interrupt to clear */ 3366 writel(pcicr, base->virtbase + base->gen_dmac.interrupt_clear); 3367 3368 /* These are __initdata and cannot be accessed after init */ 3369 base->gen_dmac.init_reg = NULL; 3370 base->gen_dmac.init_reg_size = 0; 3371 } 3372 3373 static int __init d40_lcla_allocate(struct d40_base *base) 3374 { 3375 struct d40_lcla_pool *pool = &base->lcla_pool; 3376 unsigned long *page_list; 3377 int i, j; 3378 int ret; 3379 3380 /* 3381 * This is somewhat ugly. We need 8192 bytes that are 18 bit aligned, 3382 * To full fill this hardware requirement without wasting 256 kb 3383 * we allocate pages until we get an aligned one. 3384 */ 3385 page_list = kmalloc_array(MAX_LCLA_ALLOC_ATTEMPTS, 3386 sizeof(*page_list), 3387 GFP_KERNEL); 3388 if (!page_list) 3389 return -ENOMEM; 3390 3391 /* Calculating how many pages that are required */ 3392 base->lcla_pool.pages = SZ_1K * base->num_phy_chans / PAGE_SIZE; 3393 3394 for (i = 0; i < MAX_LCLA_ALLOC_ATTEMPTS; i++) { 3395 page_list[i] = __get_free_pages(GFP_KERNEL, 3396 base->lcla_pool.pages); 3397 if (!page_list[i]) { 3398 3399 d40_err(base->dev, "Failed to allocate %d pages.\n", 3400 base->lcla_pool.pages); 3401 ret = -ENOMEM; 3402 3403 for (j = 0; j < i; j++) 3404 free_pages(page_list[j], base->lcla_pool.pages); 3405 goto free_page_list; 3406 } 3407 3408 if ((virt_to_phys((void *)page_list[i]) & 3409 (LCLA_ALIGNMENT - 1)) == 0) 3410 break; 3411 } 3412 3413 for (j = 0; j < i; j++) 3414 free_pages(page_list[j], base->lcla_pool.pages); 3415 3416 if (i < MAX_LCLA_ALLOC_ATTEMPTS) { 3417 base->lcla_pool.base = (void *)page_list[i]; 3418 } else { 3419 /* 3420 * After many attempts and no succees with finding the correct 3421 * alignment, try with allocating a big buffer. 3422 */ 3423 dev_warn(base->dev, 3424 "[%s] Failed to get %d pages @ 18 bit align.\n", 3425 __func__, base->lcla_pool.pages); 3426 base->lcla_pool.base_unaligned = kmalloc(SZ_1K * 3427 base->num_phy_chans + 3428 LCLA_ALIGNMENT, 3429 GFP_KERNEL); 3430 if (!base->lcla_pool.base_unaligned) { 3431 ret = -ENOMEM; 3432 goto free_page_list; 3433 } 3434 3435 base->lcla_pool.base = PTR_ALIGN(base->lcla_pool.base_unaligned, 3436 LCLA_ALIGNMENT); 3437 } 3438 3439 pool->dma_addr = dma_map_single(base->dev, pool->base, 3440 SZ_1K * base->num_phy_chans, 3441 DMA_TO_DEVICE); 3442 if (dma_mapping_error(base->dev, pool->dma_addr)) { 3443 pool->dma_addr = 0; 3444 ret = -ENOMEM; 3445 goto free_page_list; 3446 } 3447 3448 writel(virt_to_phys(base->lcla_pool.base), 3449 base->virtbase + D40_DREG_LCLA); 3450 ret = 0; 3451 free_page_list: 3452 kfree(page_list); 3453 return ret; 3454 } 3455 3456 static int __init d40_of_probe(struct platform_device *pdev, 3457 struct device_node *np) 3458 { 3459 struct stedma40_platform_data *pdata; 3460 int num_phy = 0, num_memcpy = 0, num_disabled = 0; 3461 const __be32 *list; 3462 3463 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); 3464 if (!pdata) 3465 return -ENOMEM; 3466 3467 /* If absent this value will be obtained from h/w. */ 3468 of_property_read_u32(np, "dma-channels", &num_phy); 3469 if (num_phy > 0) 3470 pdata->num_of_phy_chans = num_phy; 3471 3472 list = of_get_property(np, "memcpy-channels", &num_memcpy); 3473 num_memcpy /= sizeof(*list); 3474 3475 if (num_memcpy > D40_MEMCPY_MAX_CHANS || num_memcpy <= 0) { 3476 d40_err(&pdev->dev, 3477 "Invalid number of memcpy channels specified (%d)\n", 3478 num_memcpy); 3479 return -EINVAL; 3480 } 3481 pdata->num_of_memcpy_chans = num_memcpy; 3482 3483 of_property_read_u32_array(np, "memcpy-channels", 3484 dma40_memcpy_channels, 3485 num_memcpy); 3486 3487 list = of_get_property(np, "disabled-channels", &num_disabled); 3488 num_disabled /= sizeof(*list); 3489 3490 if (num_disabled >= STEDMA40_MAX_PHYS || num_disabled < 0) { 3491 d40_err(&pdev->dev, 3492 "Invalid number of disabled channels specified (%d)\n", 3493 num_disabled); 3494 return -EINVAL; 3495 } 3496 3497 of_property_read_u32_array(np, "disabled-channels", 3498 pdata->disabled_channels, 3499 num_disabled); 3500 pdata->disabled_channels[num_disabled] = -1; 3501 3502 pdev->dev.platform_data = pdata; 3503 3504 return 0; 3505 } 3506 3507 static int __init d40_probe(struct platform_device *pdev) 3508 { 3509 struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev); 3510 struct device_node *np = pdev->dev.of_node; 3511 int ret = -ENOENT; 3512 struct d40_base *base; 3513 struct resource *res; 3514 int num_reserved_chans; 3515 u32 val; 3516 3517 if (!plat_data) { 3518 if (np) { 3519 if (d40_of_probe(pdev, np)) { 3520 ret = -ENOMEM; 3521 goto report_failure; 3522 } 3523 } else { 3524 d40_err(&pdev->dev, "No pdata or Device Tree provided\n"); 3525 goto report_failure; 3526 } 3527 } 3528 3529 base = d40_hw_detect_init(pdev); 3530 if (!base) 3531 goto report_failure; 3532 3533 num_reserved_chans = d40_phy_res_init(base); 3534 3535 platform_set_drvdata(pdev, base); 3536 3537 spin_lock_init(&base->interrupt_lock); 3538 spin_lock_init(&base->execmd_lock); 3539 3540 /* Get IO for logical channel parameter address */ 3541 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lcpa"); 3542 if (!res) { 3543 ret = -ENOENT; 3544 d40_err(&pdev->dev, "No \"lcpa\" memory resource\n"); 3545 goto destroy_cache; 3546 } 3547 base->lcpa_size = resource_size(res); 3548 base->phy_lcpa = res->start; 3549 3550 if (request_mem_region(res->start, resource_size(res), 3551 D40_NAME " I/O lcpa") == NULL) { 3552 ret = -EBUSY; 3553 d40_err(&pdev->dev, "Failed to request LCPA region %pR\n", res); 3554 goto destroy_cache; 3555 } 3556 3557 /* We make use of ESRAM memory for this. */ 3558 val = readl(base->virtbase + D40_DREG_LCPA); 3559 if (res->start != val && val != 0) { 3560 dev_warn(&pdev->dev, 3561 "[%s] Mismatch LCPA dma 0x%x, def %pa\n", 3562 __func__, val, &res->start); 3563 } else 3564 writel(res->start, base->virtbase + D40_DREG_LCPA); 3565 3566 base->lcpa_base = ioremap(res->start, resource_size(res)); 3567 if (!base->lcpa_base) { 3568 ret = -ENOMEM; 3569 d40_err(&pdev->dev, "Failed to ioremap LCPA region\n"); 3570 goto destroy_cache; 3571 } 3572 /* If lcla has to be located in ESRAM we don't need to allocate */ 3573 if (base->plat_data->use_esram_lcla) { 3574 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, 3575 "lcla_esram"); 3576 if (!res) { 3577 ret = -ENOENT; 3578 d40_err(&pdev->dev, 3579 "No \"lcla_esram\" memory resource\n"); 3580 goto destroy_cache; 3581 } 3582 base->lcla_pool.base = ioremap(res->start, 3583 resource_size(res)); 3584 if (!base->lcla_pool.base) { 3585 ret = -ENOMEM; 3586 d40_err(&pdev->dev, "Failed to ioremap LCLA region\n"); 3587 goto destroy_cache; 3588 } 3589 writel(res->start, base->virtbase + D40_DREG_LCLA); 3590 3591 } else { 3592 ret = d40_lcla_allocate(base); 3593 if (ret) { 3594 d40_err(&pdev->dev, "Failed to allocate LCLA area\n"); 3595 goto destroy_cache; 3596 } 3597 } 3598 3599 spin_lock_init(&base->lcla_pool.lock); 3600 3601 base->irq = platform_get_irq(pdev, 0); 3602 3603 ret = request_irq(base->irq, d40_handle_interrupt, 0, D40_NAME, base); 3604 if (ret) { 3605 d40_err(&pdev->dev, "No IRQ defined\n"); 3606 goto destroy_cache; 3607 } 3608 3609 if (base->plat_data->use_esram_lcla) { 3610 3611 base->lcpa_regulator = regulator_get(base->dev, "lcla_esram"); 3612 if (IS_ERR(base->lcpa_regulator)) { 3613 d40_err(&pdev->dev, "Failed to get lcpa_regulator\n"); 3614 ret = PTR_ERR(base->lcpa_regulator); 3615 base->lcpa_regulator = NULL; 3616 goto destroy_cache; 3617 } 3618 3619 ret = regulator_enable(base->lcpa_regulator); 3620 if (ret) { 3621 d40_err(&pdev->dev, 3622 "Failed to enable lcpa_regulator\n"); 3623 regulator_put(base->lcpa_regulator); 3624 base->lcpa_regulator = NULL; 3625 goto destroy_cache; 3626 } 3627 } 3628 3629 writel_relaxed(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC); 3630 3631 pm_runtime_irq_safe(base->dev); 3632 pm_runtime_set_autosuspend_delay(base->dev, DMA40_AUTOSUSPEND_DELAY); 3633 pm_runtime_use_autosuspend(base->dev); 3634 pm_runtime_mark_last_busy(base->dev); 3635 pm_runtime_set_active(base->dev); 3636 pm_runtime_enable(base->dev); 3637 3638 ret = d40_dmaengine_init(base, num_reserved_chans); 3639 if (ret) 3640 goto destroy_cache; 3641 3642 base->dev->dma_parms = &base->dma_parms; 3643 ret = dma_set_max_seg_size(base->dev, STEDMA40_MAX_SEG_SIZE); 3644 if (ret) { 3645 d40_err(&pdev->dev, "Failed to set dma max seg size\n"); 3646 goto destroy_cache; 3647 } 3648 3649 d40_hw_init(base); 3650 3651 if (np) { 3652 ret = of_dma_controller_register(np, d40_xlate, NULL); 3653 if (ret) 3654 dev_err(&pdev->dev, 3655 "could not register of_dma_controller\n"); 3656 } 3657 3658 dev_info(base->dev, "initialized\n"); 3659 return 0; 3660 destroy_cache: 3661 kmem_cache_destroy(base->desc_slab); 3662 if (base->virtbase) 3663 iounmap(base->virtbase); 3664 3665 if (base->lcla_pool.base && base->plat_data->use_esram_lcla) { 3666 iounmap(base->lcla_pool.base); 3667 base->lcla_pool.base = NULL; 3668 } 3669 3670 if (base->lcla_pool.dma_addr) 3671 dma_unmap_single(base->dev, base->lcla_pool.dma_addr, 3672 SZ_1K * base->num_phy_chans, 3673 DMA_TO_DEVICE); 3674 3675 if (!base->lcla_pool.base_unaligned && base->lcla_pool.base) 3676 free_pages((unsigned long)base->lcla_pool.base, 3677 base->lcla_pool.pages); 3678 3679 kfree(base->lcla_pool.base_unaligned); 3680 3681 if (base->phy_lcpa) 3682 release_mem_region(base->phy_lcpa, 3683 base->lcpa_size); 3684 if (base->phy_start) 3685 release_mem_region(base->phy_start, 3686 base->phy_size); 3687 if (base->clk) { 3688 clk_disable_unprepare(base->clk); 3689 clk_put(base->clk); 3690 } 3691 3692 if (base->lcpa_regulator) { 3693 regulator_disable(base->lcpa_regulator); 3694 regulator_put(base->lcpa_regulator); 3695 } 3696 3697 kfree(base->lcla_pool.alloc_map); 3698 kfree(base->lookup_log_chans); 3699 kfree(base->lookup_phy_chans); 3700 kfree(base->phy_res); 3701 kfree(base); 3702 report_failure: 3703 d40_err(&pdev->dev, "probe failed\n"); 3704 return ret; 3705 } 3706 3707 static const struct of_device_id d40_match[] = { 3708 { .compatible = "stericsson,dma40", }, 3709 {} 3710 }; 3711 3712 static struct platform_driver d40_driver = { 3713 .driver = { 3714 .name = D40_NAME, 3715 .pm = &dma40_pm_ops, 3716 .of_match_table = d40_match, 3717 }, 3718 }; 3719 3720 static int __init stedma40_init(void) 3721 { 3722 return platform_driver_probe(&d40_driver, d40_probe); 3723 } 3724 subsys_initcall(stedma40_init); 3725