xref: /openbmc/linux/drivers/dma/ste_dma40.c (revision 2fa5ebe3)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) Ericsson AB 2007-2008
4  * Copyright (C) ST-Ericsson SA 2008-2010
5  * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
6  * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
7  */
8 
9 #include <linux/dma-mapping.h>
10 #include <linux/kernel.h>
11 #include <linux/slab.h>
12 #include <linux/export.h>
13 #include <linux/dmaengine.h>
14 #include <linux/platform_device.h>
15 #include <linux/clk.h>
16 #include <linux/delay.h>
17 #include <linux/log2.h>
18 #include <linux/pm.h>
19 #include <linux/pm_runtime.h>
20 #include <linux/err.h>
21 #include <linux/of.h>
22 #include <linux/of_dma.h>
23 #include <linux/amba/bus.h>
24 #include <linux/regulator/consumer.h>
25 #include <linux/platform_data/dma-ste-dma40.h>
26 
27 #include "dmaengine.h"
28 #include "ste_dma40_ll.h"
29 
30 #define D40_NAME "dma40"
31 
32 #define D40_PHY_CHAN -1
33 
34 /* For masking out/in 2 bit channel positions */
35 #define D40_CHAN_POS(chan)  (2 * (chan / 2))
36 #define D40_CHAN_POS_MASK(chan) (0x3 << D40_CHAN_POS(chan))
37 
38 /* Maximum iterations taken before giving up suspending a channel */
39 #define D40_SUSPEND_MAX_IT 500
40 
41 /* Milliseconds */
42 #define DMA40_AUTOSUSPEND_DELAY	100
43 
44 /* Hardware requirement on LCLA alignment */
45 #define LCLA_ALIGNMENT 0x40000
46 
47 /* Max number of links per event group */
48 #define D40_LCLA_LINK_PER_EVENT_GRP 128
49 #define D40_LCLA_END D40_LCLA_LINK_PER_EVENT_GRP
50 
51 /* Max number of logical channels per physical channel */
52 #define D40_MAX_LOG_CHAN_PER_PHY 32
53 
54 /* Attempts before giving up to trying to get pages that are aligned */
55 #define MAX_LCLA_ALLOC_ATTEMPTS 256
56 
57 /* Bit markings for allocation map */
58 #define D40_ALLOC_FREE		BIT(31)
59 #define D40_ALLOC_PHY		BIT(30)
60 #define D40_ALLOC_LOG_FREE	0
61 
62 #define D40_MEMCPY_MAX_CHANS	8
63 
64 /* Reserved event lines for memcpy only. */
65 #define DB8500_DMA_MEMCPY_EV_0	51
66 #define DB8500_DMA_MEMCPY_EV_1	56
67 #define DB8500_DMA_MEMCPY_EV_2	57
68 #define DB8500_DMA_MEMCPY_EV_3	58
69 #define DB8500_DMA_MEMCPY_EV_4	59
70 #define DB8500_DMA_MEMCPY_EV_5	60
71 
72 static int dma40_memcpy_channels[] = {
73 	DB8500_DMA_MEMCPY_EV_0,
74 	DB8500_DMA_MEMCPY_EV_1,
75 	DB8500_DMA_MEMCPY_EV_2,
76 	DB8500_DMA_MEMCPY_EV_3,
77 	DB8500_DMA_MEMCPY_EV_4,
78 	DB8500_DMA_MEMCPY_EV_5,
79 };
80 
81 /* Default configuration for physical memcpy */
82 static const struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
83 	.mode = STEDMA40_MODE_PHYSICAL,
84 	.dir = DMA_MEM_TO_MEM,
85 
86 	.src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
87 	.src_info.psize = STEDMA40_PSIZE_PHY_1,
88 	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
89 
90 	.dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
91 	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
92 	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
93 };
94 
95 /* Default configuration for logical memcpy */
96 static const struct stedma40_chan_cfg dma40_memcpy_conf_log = {
97 	.mode = STEDMA40_MODE_LOGICAL,
98 	.dir = DMA_MEM_TO_MEM,
99 
100 	.src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
101 	.src_info.psize = STEDMA40_PSIZE_LOG_1,
102 	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
103 
104 	.dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
105 	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
106 	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
107 };
108 
109 /**
110  * enum 40_command - The different commands and/or statuses.
111  *
112  * @D40_DMA_STOP: DMA channel command STOP or status STOPPED,
113  * @D40_DMA_RUN: The DMA channel is RUNNING of the command RUN.
114  * @D40_DMA_SUSPEND_REQ: Request the DMA to SUSPEND as soon as possible.
115  * @D40_DMA_SUSPENDED: The DMA channel is SUSPENDED.
116  */
117 enum d40_command {
118 	D40_DMA_STOP		= 0,
119 	D40_DMA_RUN		= 1,
120 	D40_DMA_SUSPEND_REQ	= 2,
121 	D40_DMA_SUSPENDED	= 3
122 };
123 
124 /*
125  * enum d40_events - The different Event Enables for the event lines.
126  *
127  * @D40_DEACTIVATE_EVENTLINE: De-activate Event line, stopping the logical chan.
128  * @D40_ACTIVATE_EVENTLINE: Activate the Event line, to start a logical chan.
129  * @D40_SUSPEND_REQ_EVENTLINE: Requesting for suspending a event line.
130  * @D40_ROUND_EVENTLINE: Status check for event line.
131  */
132 
133 enum d40_events {
134 	D40_DEACTIVATE_EVENTLINE	= 0,
135 	D40_ACTIVATE_EVENTLINE		= 1,
136 	D40_SUSPEND_REQ_EVENTLINE	= 2,
137 	D40_ROUND_EVENTLINE		= 3
138 };
139 
140 /*
141  * These are the registers that has to be saved and later restored
142  * when the DMA hw is powered off.
143  * TODO: Add save/restore of D40_DREG_GCC on dma40 v3 or later, if that works.
144  */
145 static __maybe_unused u32 d40_backup_regs[] = {
146 	D40_DREG_LCPA,
147 	D40_DREG_LCLA,
148 	D40_DREG_PRMSE,
149 	D40_DREG_PRMSO,
150 	D40_DREG_PRMOE,
151 	D40_DREG_PRMOO,
152 };
153 
154 #define BACKUP_REGS_SZ ARRAY_SIZE(d40_backup_regs)
155 
156 /*
157  * since 9540 and 8540 has the same HW revision
158  * use v4a for 9540 or ealier
159  * use v4b for 8540 or later
160  * HW revision:
161  * DB8500ed has revision 0
162  * DB8500v1 has revision 2
163  * DB8500v2 has revision 3
164  * AP9540v1 has revision 4
165  * DB8540v1 has revision 4
166  * TODO: Check if all these registers have to be saved/restored on dma40 v4a
167  */
168 static u32 d40_backup_regs_v4a[] = {
169 	D40_DREG_PSEG1,
170 	D40_DREG_PSEG2,
171 	D40_DREG_PSEG3,
172 	D40_DREG_PSEG4,
173 	D40_DREG_PCEG1,
174 	D40_DREG_PCEG2,
175 	D40_DREG_PCEG3,
176 	D40_DREG_PCEG4,
177 	D40_DREG_RSEG1,
178 	D40_DREG_RSEG2,
179 	D40_DREG_RSEG3,
180 	D40_DREG_RSEG4,
181 	D40_DREG_RCEG1,
182 	D40_DREG_RCEG2,
183 	D40_DREG_RCEG3,
184 	D40_DREG_RCEG4,
185 };
186 
187 #define BACKUP_REGS_SZ_V4A ARRAY_SIZE(d40_backup_regs_v4a)
188 
189 static u32 d40_backup_regs_v4b[] = {
190 	D40_DREG_CPSEG1,
191 	D40_DREG_CPSEG2,
192 	D40_DREG_CPSEG3,
193 	D40_DREG_CPSEG4,
194 	D40_DREG_CPSEG5,
195 	D40_DREG_CPCEG1,
196 	D40_DREG_CPCEG2,
197 	D40_DREG_CPCEG3,
198 	D40_DREG_CPCEG4,
199 	D40_DREG_CPCEG5,
200 	D40_DREG_CRSEG1,
201 	D40_DREG_CRSEG2,
202 	D40_DREG_CRSEG3,
203 	D40_DREG_CRSEG4,
204 	D40_DREG_CRSEG5,
205 	D40_DREG_CRCEG1,
206 	D40_DREG_CRCEG2,
207 	D40_DREG_CRCEG3,
208 	D40_DREG_CRCEG4,
209 	D40_DREG_CRCEG5,
210 };
211 
212 #define BACKUP_REGS_SZ_V4B ARRAY_SIZE(d40_backup_regs_v4b)
213 
214 static __maybe_unused u32 d40_backup_regs_chan[] = {
215 	D40_CHAN_REG_SSCFG,
216 	D40_CHAN_REG_SSELT,
217 	D40_CHAN_REG_SSPTR,
218 	D40_CHAN_REG_SSLNK,
219 	D40_CHAN_REG_SDCFG,
220 	D40_CHAN_REG_SDELT,
221 	D40_CHAN_REG_SDPTR,
222 	D40_CHAN_REG_SDLNK,
223 };
224 
225 #define BACKUP_REGS_SZ_MAX ((BACKUP_REGS_SZ_V4A > BACKUP_REGS_SZ_V4B) ? \
226 			     BACKUP_REGS_SZ_V4A : BACKUP_REGS_SZ_V4B)
227 
228 /**
229  * struct d40_interrupt_lookup - lookup table for interrupt handler
230  *
231  * @src: Interrupt mask register.
232  * @clr: Interrupt clear register.
233  * @is_error: true if this is an error interrupt.
234  * @offset: start delta in the lookup_log_chans in d40_base. If equals to
235  * D40_PHY_CHAN, the lookup_phy_chans shall be used instead.
236  */
237 struct d40_interrupt_lookup {
238 	u32 src;
239 	u32 clr;
240 	bool is_error;
241 	int offset;
242 };
243 
244 
245 static struct d40_interrupt_lookup il_v4a[] = {
246 	{D40_DREG_LCTIS0, D40_DREG_LCICR0, false,  0},
247 	{D40_DREG_LCTIS1, D40_DREG_LCICR1, false, 32},
248 	{D40_DREG_LCTIS2, D40_DREG_LCICR2, false, 64},
249 	{D40_DREG_LCTIS3, D40_DREG_LCICR3, false, 96},
250 	{D40_DREG_LCEIS0, D40_DREG_LCICR0, true,   0},
251 	{D40_DREG_LCEIS1, D40_DREG_LCICR1, true,  32},
252 	{D40_DREG_LCEIS2, D40_DREG_LCICR2, true,  64},
253 	{D40_DREG_LCEIS3, D40_DREG_LCICR3, true,  96},
254 	{D40_DREG_PCTIS,  D40_DREG_PCICR,  false, D40_PHY_CHAN},
255 	{D40_DREG_PCEIS,  D40_DREG_PCICR,  true,  D40_PHY_CHAN},
256 };
257 
258 static struct d40_interrupt_lookup il_v4b[] = {
259 	{D40_DREG_CLCTIS1, D40_DREG_CLCICR1, false,  0},
260 	{D40_DREG_CLCTIS2, D40_DREG_CLCICR2, false, 32},
261 	{D40_DREG_CLCTIS3, D40_DREG_CLCICR3, false, 64},
262 	{D40_DREG_CLCTIS4, D40_DREG_CLCICR4, false, 96},
263 	{D40_DREG_CLCTIS5, D40_DREG_CLCICR5, false, 128},
264 	{D40_DREG_CLCEIS1, D40_DREG_CLCICR1, true,   0},
265 	{D40_DREG_CLCEIS2, D40_DREG_CLCICR2, true,  32},
266 	{D40_DREG_CLCEIS3, D40_DREG_CLCICR3, true,  64},
267 	{D40_DREG_CLCEIS4, D40_DREG_CLCICR4, true,  96},
268 	{D40_DREG_CLCEIS5, D40_DREG_CLCICR5, true,  128},
269 	{D40_DREG_CPCTIS,  D40_DREG_CPCICR,  false, D40_PHY_CHAN},
270 	{D40_DREG_CPCEIS,  D40_DREG_CPCICR,  true,  D40_PHY_CHAN},
271 };
272 
273 /**
274  * struct d40_reg_val - simple lookup struct
275  *
276  * @reg: The register.
277  * @val: The value that belongs to the register in reg.
278  */
279 struct d40_reg_val {
280 	unsigned int reg;
281 	unsigned int val;
282 };
283 
284 static __initdata struct d40_reg_val dma_init_reg_v4a[] = {
285 	/* Clock every part of the DMA block from start */
286 	{ .reg = D40_DREG_GCC,    .val = D40_DREG_GCC_ENABLE_ALL},
287 
288 	/* Interrupts on all logical channels */
289 	{ .reg = D40_DREG_LCMIS0, .val = 0xFFFFFFFF},
290 	{ .reg = D40_DREG_LCMIS1, .val = 0xFFFFFFFF},
291 	{ .reg = D40_DREG_LCMIS2, .val = 0xFFFFFFFF},
292 	{ .reg = D40_DREG_LCMIS3, .val = 0xFFFFFFFF},
293 	{ .reg = D40_DREG_LCICR0, .val = 0xFFFFFFFF},
294 	{ .reg = D40_DREG_LCICR1, .val = 0xFFFFFFFF},
295 	{ .reg = D40_DREG_LCICR2, .val = 0xFFFFFFFF},
296 	{ .reg = D40_DREG_LCICR3, .val = 0xFFFFFFFF},
297 	{ .reg = D40_DREG_LCTIS0, .val = 0xFFFFFFFF},
298 	{ .reg = D40_DREG_LCTIS1, .val = 0xFFFFFFFF},
299 	{ .reg = D40_DREG_LCTIS2, .val = 0xFFFFFFFF},
300 	{ .reg = D40_DREG_LCTIS3, .val = 0xFFFFFFFF}
301 };
302 static __initdata struct d40_reg_val dma_init_reg_v4b[] = {
303 	/* Clock every part of the DMA block from start */
304 	{ .reg = D40_DREG_GCC,    .val = D40_DREG_GCC_ENABLE_ALL},
305 
306 	/* Interrupts on all logical channels */
307 	{ .reg = D40_DREG_CLCMIS1, .val = 0xFFFFFFFF},
308 	{ .reg = D40_DREG_CLCMIS2, .val = 0xFFFFFFFF},
309 	{ .reg = D40_DREG_CLCMIS3, .val = 0xFFFFFFFF},
310 	{ .reg = D40_DREG_CLCMIS4, .val = 0xFFFFFFFF},
311 	{ .reg = D40_DREG_CLCMIS5, .val = 0xFFFFFFFF},
312 	{ .reg = D40_DREG_CLCICR1, .val = 0xFFFFFFFF},
313 	{ .reg = D40_DREG_CLCICR2, .val = 0xFFFFFFFF},
314 	{ .reg = D40_DREG_CLCICR3, .val = 0xFFFFFFFF},
315 	{ .reg = D40_DREG_CLCICR4, .val = 0xFFFFFFFF},
316 	{ .reg = D40_DREG_CLCICR5, .val = 0xFFFFFFFF},
317 	{ .reg = D40_DREG_CLCTIS1, .val = 0xFFFFFFFF},
318 	{ .reg = D40_DREG_CLCTIS2, .val = 0xFFFFFFFF},
319 	{ .reg = D40_DREG_CLCTIS3, .val = 0xFFFFFFFF},
320 	{ .reg = D40_DREG_CLCTIS4, .val = 0xFFFFFFFF},
321 	{ .reg = D40_DREG_CLCTIS5, .val = 0xFFFFFFFF}
322 };
323 
324 /**
325  * struct d40_lli_pool - Structure for keeping LLIs in memory
326  *
327  * @base: Pointer to memory area when the pre_alloc_lli's are not large
328  * enough, IE bigger than the most common case, 1 dst and 1 src. NULL if
329  * pre_alloc_lli is used.
330  * @dma_addr: DMA address, if mapped
331  * @size: The size in bytes of the memory at base or the size of pre_alloc_lli.
332  * @pre_alloc_lli: Pre allocated area for the most common case of transfers,
333  * one buffer to one buffer.
334  */
335 struct d40_lli_pool {
336 	void	*base;
337 	int	 size;
338 	dma_addr_t	dma_addr;
339 	/* Space for dst and src, plus an extra for padding */
340 	u8	 pre_alloc_lli[3 * sizeof(struct d40_phy_lli)];
341 };
342 
343 /**
344  * struct d40_desc - A descriptor is one DMA job.
345  *
346  * @lli_phy: LLI settings for physical channel. Both src and dst=
347  * points into the lli_pool, to base if lli_len > 1 or to pre_alloc_lli if
348  * lli_len equals one.
349  * @lli_log: Same as above but for logical channels.
350  * @lli_pool: The pool with two entries pre-allocated.
351  * @lli_len: Number of llis of current descriptor.
352  * @lli_current: Number of transferred llis.
353  * @lcla_alloc: Number of LCLA entries allocated.
354  * @txd: DMA engine struct. Used for among other things for communication
355  * during a transfer.
356  * @node: List entry.
357  * @is_in_client_list: true if the client owns this descriptor.
358  * @cyclic: true if this is a cyclic job
359  *
360  * This descriptor is used for both logical and physical transfers.
361  */
362 struct d40_desc {
363 	/* LLI physical */
364 	struct d40_phy_lli_bidir	 lli_phy;
365 	/* LLI logical */
366 	struct d40_log_lli_bidir	 lli_log;
367 
368 	struct d40_lli_pool		 lli_pool;
369 	int				 lli_len;
370 	int				 lli_current;
371 	int				 lcla_alloc;
372 
373 	struct dma_async_tx_descriptor	 txd;
374 	struct list_head		 node;
375 
376 	bool				 is_in_client_list;
377 	bool				 cyclic;
378 };
379 
380 /**
381  * struct d40_lcla_pool - LCLA pool settings and data.
382  *
383  * @base: The virtual address of LCLA. 18 bit aligned.
384  * @dma_addr: DMA address, if mapped
385  * @base_unaligned: The orignal kmalloc pointer, if kmalloc is used.
386  * This pointer is only there for clean-up on error.
387  * @pages: The number of pages needed for all physical channels.
388  * Only used later for clean-up on error
389  * @lock: Lock to protect the content in this struct.
390  * @alloc_map: big map over which LCLA entry is own by which job.
391  */
392 struct d40_lcla_pool {
393 	void		*base;
394 	dma_addr_t	dma_addr;
395 	void		*base_unaligned;
396 	int		 pages;
397 	spinlock_t	 lock;
398 	struct d40_desc	**alloc_map;
399 };
400 
401 /**
402  * struct d40_phy_res - struct for handling eventlines mapped to physical
403  * channels.
404  *
405  * @lock: A lock protection this entity.
406  * @reserved: True if used by secure world or otherwise.
407  * @num: The physical channel number of this entity.
408  * @allocated_src: Bit mapped to show which src event line's are mapped to
409  * this physical channel. Can also be free or physically allocated.
410  * @allocated_dst: Same as for src but is dst.
411  * allocated_dst and allocated_src uses the D40_ALLOC* defines as well as
412  * event line number.
413  * @use_soft_lli: To mark if the linked lists of channel are managed by SW.
414  */
415 struct d40_phy_res {
416 	spinlock_t lock;
417 	bool	   reserved;
418 	int	   num;
419 	u32	   allocated_src;
420 	u32	   allocated_dst;
421 	bool	   use_soft_lli;
422 };
423 
424 struct d40_base;
425 
426 /**
427  * struct d40_chan - Struct that describes a channel.
428  *
429  * @lock: A spinlock to protect this struct.
430  * @log_num: The logical number, if any of this channel.
431  * @pending_tx: The number of pending transfers. Used between interrupt handler
432  * and tasklet.
433  * @busy: Set to true when transfer is ongoing on this channel.
434  * @phy_chan: Pointer to physical channel which this instance runs on. If this
435  * point is NULL, then the channel is not allocated.
436  * @chan: DMA engine handle.
437  * @tasklet: Tasklet that gets scheduled from interrupt context to complete a
438  * transfer and call client callback.
439  * @client: Cliented owned descriptor list.
440  * @pending_queue: Submitted jobs, to be issued by issue_pending()
441  * @active: Active descriptor.
442  * @done: Completed jobs
443  * @queue: Queued jobs.
444  * @prepare_queue: Prepared jobs.
445  * @dma_cfg: The client configuration of this dma channel.
446  * @slave_config: DMA slave configuration.
447  * @configured: whether the dma_cfg configuration is valid
448  * @base: Pointer to the device instance struct.
449  * @src_def_cfg: Default cfg register setting for src.
450  * @dst_def_cfg: Default cfg register setting for dst.
451  * @log_def: Default logical channel settings.
452  * @lcpa: Pointer to dst and src lcpa settings.
453  * @runtime_addr: runtime configured address.
454  * @runtime_direction: runtime configured direction.
455  *
456  * This struct can either "be" a logical or a physical channel.
457  */
458 struct d40_chan {
459 	spinlock_t			 lock;
460 	int				 log_num;
461 	int				 pending_tx;
462 	bool				 busy;
463 	struct d40_phy_res		*phy_chan;
464 	struct dma_chan			 chan;
465 	struct tasklet_struct		 tasklet;
466 	struct list_head		 client;
467 	struct list_head		 pending_queue;
468 	struct list_head		 active;
469 	struct list_head		 done;
470 	struct list_head		 queue;
471 	struct list_head		 prepare_queue;
472 	struct stedma40_chan_cfg	 dma_cfg;
473 	struct dma_slave_config		 slave_config;
474 	bool				 configured;
475 	struct d40_base			*base;
476 	/* Default register configurations */
477 	u32				 src_def_cfg;
478 	u32				 dst_def_cfg;
479 	struct d40_def_lcsp		 log_def;
480 	struct d40_log_lli_full		*lcpa;
481 	/* Runtime reconfiguration */
482 	dma_addr_t			runtime_addr;
483 	enum dma_transfer_direction	runtime_direction;
484 };
485 
486 /**
487  * struct d40_gen_dmac - generic values to represent u8500/u8540 DMA
488  * controller
489  *
490  * @backup: the pointer to the registers address array for backup
491  * @backup_size: the size of the registers address array for backup
492  * @realtime_en: the realtime enable register
493  * @realtime_clear: the realtime clear register
494  * @high_prio_en: the high priority enable register
495  * @high_prio_clear: the high priority clear register
496  * @interrupt_en: the interrupt enable register
497  * @interrupt_clear: the interrupt clear register
498  * @il: the pointer to struct d40_interrupt_lookup
499  * @il_size: the size of d40_interrupt_lookup array
500  * @init_reg: the pointer to the struct d40_reg_val
501  * @init_reg_size: the size of d40_reg_val array
502  */
503 struct d40_gen_dmac {
504 	u32				*backup;
505 	u32				 backup_size;
506 	u32				 realtime_en;
507 	u32				 realtime_clear;
508 	u32				 high_prio_en;
509 	u32				 high_prio_clear;
510 	u32				 interrupt_en;
511 	u32				 interrupt_clear;
512 	struct d40_interrupt_lookup	*il;
513 	u32				 il_size;
514 	struct d40_reg_val		*init_reg;
515 	u32				 init_reg_size;
516 };
517 
518 /**
519  * struct d40_base - The big global struct, one for each probe'd instance.
520  *
521  * @interrupt_lock: Lock used to make sure one interrupt is handle a time.
522  * @execmd_lock: Lock for execute command usage since several channels share
523  * the same physical register.
524  * @dev: The device structure.
525  * @virtbase: The virtual base address of the DMA's register.
526  * @rev: silicon revision detected.
527  * @clk: Pointer to the DMA clock structure.
528  * @phy_start: Physical memory start of the DMA registers.
529  * @phy_size: Size of the DMA register map.
530  * @irq: The IRQ number.
531  * @num_memcpy_chans: The number of channels used for memcpy (mem-to-mem
532  * transfers).
533  * @num_phy_chans: The number of physical channels. Read from HW. This
534  * is the number of available channels for this driver, not counting "Secure
535  * mode" allocated physical channels.
536  * @num_log_chans: The number of logical channels. Calculated from
537  * num_phy_chans.
538  * @dma_both: dma_device channels that can do both memcpy and slave transfers.
539  * @dma_slave: dma_device channels that can do only do slave transfers.
540  * @dma_memcpy: dma_device channels that can do only do memcpy transfers.
541  * @phy_chans: Room for all possible physical channels in system.
542  * @log_chans: Room for all possible logical channels in system.
543  * @lookup_log_chans: Used to map interrupt number to logical channel. Points
544  * to log_chans entries.
545  * @lookup_phy_chans: Used to map interrupt number to physical channel. Points
546  * to phy_chans entries.
547  * @plat_data: Pointer to provided platform_data which is the driver
548  * configuration.
549  * @lcpa_regulator: Pointer to hold the regulator for the esram bank for lcla.
550  * @phy_res: Vector containing all physical channels.
551  * @lcla_pool: lcla pool settings and data.
552  * @lcpa_base: The virtual mapped address of LCPA.
553  * @phy_lcpa: The physical address of the LCPA.
554  * @lcpa_size: The size of the LCPA area.
555  * @desc_slab: cache for descriptors.
556  * @reg_val_backup: Here the values of some hardware registers are stored
557  * before the DMA is powered off. They are restored when the power is back on.
558  * @reg_val_backup_v4: Backup of registers that only exits on dma40 v3 and
559  * later
560  * @reg_val_backup_chan: Backup data for standard channel parameter registers.
561  * @regs_interrupt: Scratch space for registers during interrupt.
562  * @gcc_pwr_off_mask: Mask to maintain the channels that can be turned off.
563  * @gen_dmac: the struct for generic registers values to represent u8500/8540
564  * DMA controller
565  */
566 struct d40_base {
567 	spinlock_t			 interrupt_lock;
568 	spinlock_t			 execmd_lock;
569 	struct device			 *dev;
570 	void __iomem			 *virtbase;
571 	u8				  rev:4;
572 	struct clk			 *clk;
573 	phys_addr_t			  phy_start;
574 	resource_size_t			  phy_size;
575 	int				  irq;
576 	int				  num_memcpy_chans;
577 	int				  num_phy_chans;
578 	int				  num_log_chans;
579 	struct dma_device		  dma_both;
580 	struct dma_device		  dma_slave;
581 	struct dma_device		  dma_memcpy;
582 	struct d40_chan			 *phy_chans;
583 	struct d40_chan			 *log_chans;
584 	struct d40_chan			**lookup_log_chans;
585 	struct d40_chan			**lookup_phy_chans;
586 	struct stedma40_platform_data	 *plat_data;
587 	struct regulator		 *lcpa_regulator;
588 	/* Physical half channels */
589 	struct d40_phy_res		 *phy_res;
590 	struct d40_lcla_pool		  lcla_pool;
591 	void				 *lcpa_base;
592 	dma_addr_t			  phy_lcpa;
593 	resource_size_t			  lcpa_size;
594 	struct kmem_cache		 *desc_slab;
595 	u32				  reg_val_backup[BACKUP_REGS_SZ];
596 	u32				  reg_val_backup_v4[BACKUP_REGS_SZ_MAX];
597 	u32				 *reg_val_backup_chan;
598 	u32				 *regs_interrupt;
599 	u16				  gcc_pwr_off_mask;
600 	struct d40_gen_dmac		  gen_dmac;
601 };
602 
603 static struct device *chan2dev(struct d40_chan *d40c)
604 {
605 	return &d40c->chan.dev->device;
606 }
607 
608 static bool chan_is_physical(struct d40_chan *chan)
609 {
610 	return chan->log_num == D40_PHY_CHAN;
611 }
612 
613 static bool chan_is_logical(struct d40_chan *chan)
614 {
615 	return !chan_is_physical(chan);
616 }
617 
618 static void __iomem *chan_base(struct d40_chan *chan)
619 {
620 	return chan->base->virtbase + D40_DREG_PCBASE +
621 	       chan->phy_chan->num * D40_DREG_PCDELTA;
622 }
623 
624 #define d40_err(dev, format, arg...)		\
625 	dev_err(dev, "[%s] " format, __func__, ## arg)
626 
627 #define chan_err(d40c, format, arg...)		\
628 	d40_err(chan2dev(d40c), format, ## arg)
629 
630 static int d40_set_runtime_config_write(struct dma_chan *chan,
631 				  struct dma_slave_config *config,
632 				  enum dma_transfer_direction direction);
633 
634 static int d40_pool_lli_alloc(struct d40_chan *d40c, struct d40_desc *d40d,
635 			      int lli_len)
636 {
637 	bool is_log = chan_is_logical(d40c);
638 	u32 align;
639 	void *base;
640 
641 	if (is_log)
642 		align = sizeof(struct d40_log_lli);
643 	else
644 		align = sizeof(struct d40_phy_lli);
645 
646 	if (lli_len == 1) {
647 		base = d40d->lli_pool.pre_alloc_lli;
648 		d40d->lli_pool.size = sizeof(d40d->lli_pool.pre_alloc_lli);
649 		d40d->lli_pool.base = NULL;
650 	} else {
651 		d40d->lli_pool.size = lli_len * 2 * align;
652 
653 		base = kmalloc(d40d->lli_pool.size + align, GFP_NOWAIT);
654 		d40d->lli_pool.base = base;
655 
656 		if (d40d->lli_pool.base == NULL)
657 			return -ENOMEM;
658 	}
659 
660 	if (is_log) {
661 		d40d->lli_log.src = PTR_ALIGN(base, align);
662 		d40d->lli_log.dst = d40d->lli_log.src + lli_len;
663 
664 		d40d->lli_pool.dma_addr = 0;
665 	} else {
666 		d40d->lli_phy.src = PTR_ALIGN(base, align);
667 		d40d->lli_phy.dst = d40d->lli_phy.src + lli_len;
668 
669 		d40d->lli_pool.dma_addr = dma_map_single(d40c->base->dev,
670 							 d40d->lli_phy.src,
671 							 d40d->lli_pool.size,
672 							 DMA_TO_DEVICE);
673 
674 		if (dma_mapping_error(d40c->base->dev,
675 				      d40d->lli_pool.dma_addr)) {
676 			kfree(d40d->lli_pool.base);
677 			d40d->lli_pool.base = NULL;
678 			d40d->lli_pool.dma_addr = 0;
679 			return -ENOMEM;
680 		}
681 	}
682 
683 	return 0;
684 }
685 
686 static void d40_pool_lli_free(struct d40_chan *d40c, struct d40_desc *d40d)
687 {
688 	if (d40d->lli_pool.dma_addr)
689 		dma_unmap_single(d40c->base->dev, d40d->lli_pool.dma_addr,
690 				 d40d->lli_pool.size, DMA_TO_DEVICE);
691 
692 	kfree(d40d->lli_pool.base);
693 	d40d->lli_pool.base = NULL;
694 	d40d->lli_pool.size = 0;
695 	d40d->lli_log.src = NULL;
696 	d40d->lli_log.dst = NULL;
697 	d40d->lli_phy.src = NULL;
698 	d40d->lli_phy.dst = NULL;
699 }
700 
701 static int d40_lcla_alloc_one(struct d40_chan *d40c,
702 			      struct d40_desc *d40d)
703 {
704 	unsigned long flags;
705 	int i;
706 	int ret = -EINVAL;
707 
708 	spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
709 
710 	/*
711 	 * Allocate both src and dst at the same time, therefore the half
712 	 * start on 1 since 0 can't be used since zero is used as end marker.
713 	 */
714 	for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) {
715 		int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i;
716 
717 		if (!d40c->base->lcla_pool.alloc_map[idx]) {
718 			d40c->base->lcla_pool.alloc_map[idx] = d40d;
719 			d40d->lcla_alloc++;
720 			ret = i;
721 			break;
722 		}
723 	}
724 
725 	spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
726 
727 	return ret;
728 }
729 
730 static int d40_lcla_free_all(struct d40_chan *d40c,
731 			     struct d40_desc *d40d)
732 {
733 	unsigned long flags;
734 	int i;
735 	int ret = -EINVAL;
736 
737 	if (chan_is_physical(d40c))
738 		return 0;
739 
740 	spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
741 
742 	for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) {
743 		int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i;
744 
745 		if (d40c->base->lcla_pool.alloc_map[idx] == d40d) {
746 			d40c->base->lcla_pool.alloc_map[idx] = NULL;
747 			d40d->lcla_alloc--;
748 			if (d40d->lcla_alloc == 0) {
749 				ret = 0;
750 				break;
751 			}
752 		}
753 	}
754 
755 	spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
756 
757 	return ret;
758 
759 }
760 
761 static void d40_desc_remove(struct d40_desc *d40d)
762 {
763 	list_del(&d40d->node);
764 }
765 
766 static struct d40_desc *d40_desc_get(struct d40_chan *d40c)
767 {
768 	struct d40_desc *desc = NULL;
769 
770 	if (!list_empty(&d40c->client)) {
771 		struct d40_desc *d;
772 		struct d40_desc *_d;
773 
774 		list_for_each_entry_safe(d, _d, &d40c->client, node) {
775 			if (async_tx_test_ack(&d->txd)) {
776 				d40_desc_remove(d);
777 				desc = d;
778 				memset(desc, 0, sizeof(*desc));
779 				break;
780 			}
781 		}
782 	}
783 
784 	if (!desc)
785 		desc = kmem_cache_zalloc(d40c->base->desc_slab, GFP_NOWAIT);
786 
787 	if (desc)
788 		INIT_LIST_HEAD(&desc->node);
789 
790 	return desc;
791 }
792 
793 static void d40_desc_free(struct d40_chan *d40c, struct d40_desc *d40d)
794 {
795 
796 	d40_pool_lli_free(d40c, d40d);
797 	d40_lcla_free_all(d40c, d40d);
798 	kmem_cache_free(d40c->base->desc_slab, d40d);
799 }
800 
801 static void d40_desc_submit(struct d40_chan *d40c, struct d40_desc *desc)
802 {
803 	list_add_tail(&desc->node, &d40c->active);
804 }
805 
806 static void d40_phy_lli_load(struct d40_chan *chan, struct d40_desc *desc)
807 {
808 	struct d40_phy_lli *lli_dst = desc->lli_phy.dst;
809 	struct d40_phy_lli *lli_src = desc->lli_phy.src;
810 	void __iomem *base = chan_base(chan);
811 
812 	writel(lli_src->reg_cfg, base + D40_CHAN_REG_SSCFG);
813 	writel(lli_src->reg_elt, base + D40_CHAN_REG_SSELT);
814 	writel(lli_src->reg_ptr, base + D40_CHAN_REG_SSPTR);
815 	writel(lli_src->reg_lnk, base + D40_CHAN_REG_SSLNK);
816 
817 	writel(lli_dst->reg_cfg, base + D40_CHAN_REG_SDCFG);
818 	writel(lli_dst->reg_elt, base + D40_CHAN_REG_SDELT);
819 	writel(lli_dst->reg_ptr, base + D40_CHAN_REG_SDPTR);
820 	writel(lli_dst->reg_lnk, base + D40_CHAN_REG_SDLNK);
821 }
822 
823 static void d40_desc_done(struct d40_chan *d40c, struct d40_desc *desc)
824 {
825 	list_add_tail(&desc->node, &d40c->done);
826 }
827 
828 static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc)
829 {
830 	struct d40_lcla_pool *pool = &chan->base->lcla_pool;
831 	struct d40_log_lli_bidir *lli = &desc->lli_log;
832 	int lli_current = desc->lli_current;
833 	int lli_len = desc->lli_len;
834 	bool cyclic = desc->cyclic;
835 	int curr_lcla = -EINVAL;
836 	int first_lcla = 0;
837 	bool use_esram_lcla = chan->base->plat_data->use_esram_lcla;
838 	bool linkback;
839 
840 	/*
841 	 * We may have partially running cyclic transfers, in case we did't get
842 	 * enough LCLA entries.
843 	 */
844 	linkback = cyclic && lli_current == 0;
845 
846 	/*
847 	 * For linkback, we need one LCLA even with only one link, because we
848 	 * can't link back to the one in LCPA space
849 	 */
850 	if (linkback || (lli_len - lli_current > 1)) {
851 		/*
852 		 * If the channel is expected to use only soft_lli don't
853 		 * allocate a lcla. This is to avoid a HW issue that exists
854 		 * in some controller during a peripheral to memory transfer
855 		 * that uses linked lists.
856 		 */
857 		if (!(chan->phy_chan->use_soft_lli &&
858 			chan->dma_cfg.dir == DMA_DEV_TO_MEM))
859 			curr_lcla = d40_lcla_alloc_one(chan, desc);
860 
861 		first_lcla = curr_lcla;
862 	}
863 
864 	/*
865 	 * For linkback, we normally load the LCPA in the loop since we need to
866 	 * link it to the second LCLA and not the first.  However, if we
867 	 * couldn't even get a first LCLA, then we have to run in LCPA and
868 	 * reload manually.
869 	 */
870 	if (!linkback || curr_lcla == -EINVAL) {
871 		unsigned int flags = 0;
872 
873 		if (curr_lcla == -EINVAL)
874 			flags |= LLI_TERM_INT;
875 
876 		d40_log_lli_lcpa_write(chan->lcpa,
877 				       &lli->dst[lli_current],
878 				       &lli->src[lli_current],
879 				       curr_lcla,
880 				       flags);
881 		lli_current++;
882 	}
883 
884 	if (curr_lcla < 0)
885 		goto set_current;
886 
887 	for (; lli_current < lli_len; lli_current++) {
888 		unsigned int lcla_offset = chan->phy_chan->num * 1024 +
889 					   8 * curr_lcla * 2;
890 		struct d40_log_lli *lcla = pool->base + lcla_offset;
891 		unsigned int flags = 0;
892 		int next_lcla;
893 
894 		if (lli_current + 1 < lli_len)
895 			next_lcla = d40_lcla_alloc_one(chan, desc);
896 		else
897 			next_lcla = linkback ? first_lcla : -EINVAL;
898 
899 		if (cyclic || next_lcla == -EINVAL)
900 			flags |= LLI_TERM_INT;
901 
902 		if (linkback && curr_lcla == first_lcla) {
903 			/* First link goes in both LCPA and LCLA */
904 			d40_log_lli_lcpa_write(chan->lcpa,
905 					       &lli->dst[lli_current],
906 					       &lli->src[lli_current],
907 					       next_lcla, flags);
908 		}
909 
910 		/*
911 		 * One unused LCLA in the cyclic case if the very first
912 		 * next_lcla fails...
913 		 */
914 		d40_log_lli_lcla_write(lcla,
915 				       &lli->dst[lli_current],
916 				       &lli->src[lli_current],
917 				       next_lcla, flags);
918 
919 		/*
920 		 * Cache maintenance is not needed if lcla is
921 		 * mapped in esram
922 		 */
923 		if (!use_esram_lcla) {
924 			dma_sync_single_range_for_device(chan->base->dev,
925 						pool->dma_addr, lcla_offset,
926 						2 * sizeof(struct d40_log_lli),
927 						DMA_TO_DEVICE);
928 		}
929 		curr_lcla = next_lcla;
930 
931 		if (curr_lcla == -EINVAL || curr_lcla == first_lcla) {
932 			lli_current++;
933 			break;
934 		}
935 	}
936  set_current:
937 	desc->lli_current = lli_current;
938 }
939 
940 static void d40_desc_load(struct d40_chan *d40c, struct d40_desc *d40d)
941 {
942 	if (chan_is_physical(d40c)) {
943 		d40_phy_lli_load(d40c, d40d);
944 		d40d->lli_current = d40d->lli_len;
945 	} else
946 		d40_log_lli_to_lcxa(d40c, d40d);
947 }
948 
949 static struct d40_desc *d40_first_active_get(struct d40_chan *d40c)
950 {
951 	return list_first_entry_or_null(&d40c->active, struct d40_desc, node);
952 }
953 
954 /* remove desc from current queue and add it to the pending_queue */
955 static void d40_desc_queue(struct d40_chan *d40c, struct d40_desc *desc)
956 {
957 	d40_desc_remove(desc);
958 	desc->is_in_client_list = false;
959 	list_add_tail(&desc->node, &d40c->pending_queue);
960 }
961 
962 static struct d40_desc *d40_first_pending(struct d40_chan *d40c)
963 {
964 	return list_first_entry_or_null(&d40c->pending_queue, struct d40_desc,
965 					node);
966 }
967 
968 static struct d40_desc *d40_first_queued(struct d40_chan *d40c)
969 {
970 	return list_first_entry_or_null(&d40c->queue, struct d40_desc, node);
971 }
972 
973 static struct d40_desc *d40_first_done(struct d40_chan *d40c)
974 {
975 	return list_first_entry_or_null(&d40c->done, struct d40_desc, node);
976 }
977 
978 static int d40_psize_2_burst_size(bool is_log, int psize)
979 {
980 	if (is_log) {
981 		if (psize == STEDMA40_PSIZE_LOG_1)
982 			return 1;
983 	} else {
984 		if (psize == STEDMA40_PSIZE_PHY_1)
985 			return 1;
986 	}
987 
988 	return 2 << psize;
989 }
990 
991 /*
992  * The dma only supports transmitting packages up to
993  * STEDMA40_MAX_SEG_SIZE * data_width, where data_width is stored in Bytes.
994  *
995  * Calculate the total number of dma elements required to send the entire sg list.
996  */
997 static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2)
998 {
999 	int dmalen;
1000 	u32 max_w = max(data_width1, data_width2);
1001 	u32 min_w = min(data_width1, data_width2);
1002 	u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w);
1003 
1004 	if (seg_max > STEDMA40_MAX_SEG_SIZE)
1005 		seg_max -= max_w;
1006 
1007 	if (!IS_ALIGNED(size, max_w))
1008 		return -EINVAL;
1009 
1010 	if (size <= seg_max)
1011 		dmalen = 1;
1012 	else {
1013 		dmalen = size / seg_max;
1014 		if (dmalen * seg_max < size)
1015 			dmalen++;
1016 	}
1017 	return dmalen;
1018 }
1019 
1020 static int d40_sg_2_dmalen(struct scatterlist *sgl, int sg_len,
1021 			   u32 data_width1, u32 data_width2)
1022 {
1023 	struct scatterlist *sg;
1024 	int i;
1025 	int len = 0;
1026 	int ret;
1027 
1028 	for_each_sg(sgl, sg, sg_len, i) {
1029 		ret = d40_size_2_dmalen(sg_dma_len(sg),
1030 					data_width1, data_width2);
1031 		if (ret < 0)
1032 			return ret;
1033 		len += ret;
1034 	}
1035 	return len;
1036 }
1037 
1038 static int __d40_execute_command_phy(struct d40_chan *d40c,
1039 				     enum d40_command command)
1040 {
1041 	u32 status;
1042 	int i;
1043 	void __iomem *active_reg;
1044 	int ret = 0;
1045 	unsigned long flags;
1046 	u32 wmask;
1047 
1048 	if (command == D40_DMA_STOP) {
1049 		ret = __d40_execute_command_phy(d40c, D40_DMA_SUSPEND_REQ);
1050 		if (ret)
1051 			return ret;
1052 	}
1053 
1054 	spin_lock_irqsave(&d40c->base->execmd_lock, flags);
1055 
1056 	if (d40c->phy_chan->num % 2 == 0)
1057 		active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
1058 	else
1059 		active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
1060 
1061 	if (command == D40_DMA_SUSPEND_REQ) {
1062 		status = (readl(active_reg) &
1063 			  D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1064 			D40_CHAN_POS(d40c->phy_chan->num);
1065 
1066 		if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP)
1067 			goto unlock;
1068 	}
1069 
1070 	wmask = 0xffffffff & ~(D40_CHAN_POS_MASK(d40c->phy_chan->num));
1071 	writel(wmask | (command << D40_CHAN_POS(d40c->phy_chan->num)),
1072 	       active_reg);
1073 
1074 	if (command == D40_DMA_SUSPEND_REQ) {
1075 
1076 		for (i = 0 ; i < D40_SUSPEND_MAX_IT; i++) {
1077 			status = (readl(active_reg) &
1078 				  D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1079 				D40_CHAN_POS(d40c->phy_chan->num);
1080 
1081 			cpu_relax();
1082 			/*
1083 			 * Reduce the number of bus accesses while
1084 			 * waiting for the DMA to suspend.
1085 			 */
1086 			udelay(3);
1087 
1088 			if (status == D40_DMA_STOP ||
1089 			    status == D40_DMA_SUSPENDED)
1090 				break;
1091 		}
1092 
1093 		if (i == D40_SUSPEND_MAX_IT) {
1094 			chan_err(d40c,
1095 				"unable to suspend the chl %d (log: %d) status %x\n",
1096 				d40c->phy_chan->num, d40c->log_num,
1097 				status);
1098 			dump_stack();
1099 			ret = -EBUSY;
1100 		}
1101 
1102 	}
1103  unlock:
1104 	spin_unlock_irqrestore(&d40c->base->execmd_lock, flags);
1105 	return ret;
1106 }
1107 
1108 static void d40_term_all(struct d40_chan *d40c)
1109 {
1110 	struct d40_desc *d40d;
1111 	struct d40_desc *_d;
1112 
1113 	/* Release completed descriptors */
1114 	while ((d40d = d40_first_done(d40c))) {
1115 		d40_desc_remove(d40d);
1116 		d40_desc_free(d40c, d40d);
1117 	}
1118 
1119 	/* Release active descriptors */
1120 	while ((d40d = d40_first_active_get(d40c))) {
1121 		d40_desc_remove(d40d);
1122 		d40_desc_free(d40c, d40d);
1123 	}
1124 
1125 	/* Release queued descriptors waiting for transfer */
1126 	while ((d40d = d40_first_queued(d40c))) {
1127 		d40_desc_remove(d40d);
1128 		d40_desc_free(d40c, d40d);
1129 	}
1130 
1131 	/* Release pending descriptors */
1132 	while ((d40d = d40_first_pending(d40c))) {
1133 		d40_desc_remove(d40d);
1134 		d40_desc_free(d40c, d40d);
1135 	}
1136 
1137 	/* Release client owned descriptors */
1138 	if (!list_empty(&d40c->client))
1139 		list_for_each_entry_safe(d40d, _d, &d40c->client, node) {
1140 			d40_desc_remove(d40d);
1141 			d40_desc_free(d40c, d40d);
1142 		}
1143 
1144 	/* Release descriptors in prepare queue */
1145 	if (!list_empty(&d40c->prepare_queue))
1146 		list_for_each_entry_safe(d40d, _d,
1147 					 &d40c->prepare_queue, node) {
1148 			d40_desc_remove(d40d);
1149 			d40_desc_free(d40c, d40d);
1150 		}
1151 
1152 	d40c->pending_tx = 0;
1153 }
1154 
1155 static void __d40_config_set_event(struct d40_chan *d40c,
1156 				   enum d40_events event_type, u32 event,
1157 				   int reg)
1158 {
1159 	void __iomem *addr = chan_base(d40c) + reg;
1160 	int tries;
1161 	u32 status;
1162 
1163 	switch (event_type) {
1164 
1165 	case D40_DEACTIVATE_EVENTLINE:
1166 
1167 		writel((D40_DEACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event))
1168 		       | ~D40_EVENTLINE_MASK(event), addr);
1169 		break;
1170 
1171 	case D40_SUSPEND_REQ_EVENTLINE:
1172 		status = (readl(addr) & D40_EVENTLINE_MASK(event)) >>
1173 			  D40_EVENTLINE_POS(event);
1174 
1175 		if (status == D40_DEACTIVATE_EVENTLINE ||
1176 		    status == D40_SUSPEND_REQ_EVENTLINE)
1177 			break;
1178 
1179 		writel((D40_SUSPEND_REQ_EVENTLINE << D40_EVENTLINE_POS(event))
1180 		       | ~D40_EVENTLINE_MASK(event), addr);
1181 
1182 		for (tries = 0 ; tries < D40_SUSPEND_MAX_IT; tries++) {
1183 
1184 			status = (readl(addr) & D40_EVENTLINE_MASK(event)) >>
1185 				  D40_EVENTLINE_POS(event);
1186 
1187 			cpu_relax();
1188 			/*
1189 			 * Reduce the number of bus accesses while
1190 			 * waiting for the DMA to suspend.
1191 			 */
1192 			udelay(3);
1193 
1194 			if (status == D40_DEACTIVATE_EVENTLINE)
1195 				break;
1196 		}
1197 
1198 		if (tries == D40_SUSPEND_MAX_IT) {
1199 			chan_err(d40c,
1200 				"unable to stop the event_line chl %d (log: %d)"
1201 				"status %x\n", d40c->phy_chan->num,
1202 				 d40c->log_num, status);
1203 		}
1204 		break;
1205 
1206 	case D40_ACTIVATE_EVENTLINE:
1207 	/*
1208 	 * The hardware sometimes doesn't register the enable when src and dst
1209 	 * event lines are active on the same logical channel.  Retry to ensure
1210 	 * it does.  Usually only one retry is sufficient.
1211 	 */
1212 		tries = 100;
1213 		while (--tries) {
1214 			writel((D40_ACTIVATE_EVENTLINE <<
1215 				D40_EVENTLINE_POS(event)) |
1216 				~D40_EVENTLINE_MASK(event), addr);
1217 
1218 			if (readl(addr) & D40_EVENTLINE_MASK(event))
1219 				break;
1220 		}
1221 
1222 		if (tries != 99)
1223 			dev_dbg(chan2dev(d40c),
1224 				"[%s] workaround enable S%cLNK (%d tries)\n",
1225 				__func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D',
1226 				100 - tries);
1227 
1228 		WARN_ON(!tries);
1229 		break;
1230 
1231 	case D40_ROUND_EVENTLINE:
1232 		BUG();
1233 		break;
1234 
1235 	}
1236 }
1237 
1238 static void d40_config_set_event(struct d40_chan *d40c,
1239 				 enum d40_events event_type)
1240 {
1241 	u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
1242 
1243 	/* Enable event line connected to device (or memcpy) */
1244 	if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
1245 	    (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
1246 		__d40_config_set_event(d40c, event_type, event,
1247 				       D40_CHAN_REG_SSLNK);
1248 
1249 	if (d40c->dma_cfg.dir !=  DMA_DEV_TO_MEM)
1250 		__d40_config_set_event(d40c, event_type, event,
1251 				       D40_CHAN_REG_SDLNK);
1252 }
1253 
1254 static u32 d40_chan_has_events(struct d40_chan *d40c)
1255 {
1256 	void __iomem *chanbase = chan_base(d40c);
1257 	u32 val;
1258 
1259 	val = readl(chanbase + D40_CHAN_REG_SSLNK);
1260 	val |= readl(chanbase + D40_CHAN_REG_SDLNK);
1261 
1262 	return val;
1263 }
1264 
1265 static int
1266 __d40_execute_command_log(struct d40_chan *d40c, enum d40_command command)
1267 {
1268 	unsigned long flags;
1269 	int ret = 0;
1270 	u32 active_status;
1271 	void __iomem *active_reg;
1272 
1273 	if (d40c->phy_chan->num % 2 == 0)
1274 		active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
1275 	else
1276 		active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
1277 
1278 
1279 	spin_lock_irqsave(&d40c->phy_chan->lock, flags);
1280 
1281 	switch (command) {
1282 	case D40_DMA_STOP:
1283 	case D40_DMA_SUSPEND_REQ:
1284 
1285 		active_status = (readl(active_reg) &
1286 				 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1287 				 D40_CHAN_POS(d40c->phy_chan->num);
1288 
1289 		if (active_status == D40_DMA_RUN)
1290 			d40_config_set_event(d40c, D40_SUSPEND_REQ_EVENTLINE);
1291 		else
1292 			d40_config_set_event(d40c, D40_DEACTIVATE_EVENTLINE);
1293 
1294 		if (!d40_chan_has_events(d40c) && (command == D40_DMA_STOP))
1295 			ret = __d40_execute_command_phy(d40c, command);
1296 
1297 		break;
1298 
1299 	case D40_DMA_RUN:
1300 
1301 		d40_config_set_event(d40c, D40_ACTIVATE_EVENTLINE);
1302 		ret = __d40_execute_command_phy(d40c, command);
1303 		break;
1304 
1305 	case D40_DMA_SUSPENDED:
1306 		BUG();
1307 		break;
1308 	}
1309 
1310 	spin_unlock_irqrestore(&d40c->phy_chan->lock, flags);
1311 	return ret;
1312 }
1313 
1314 static int d40_channel_execute_command(struct d40_chan *d40c,
1315 				       enum d40_command command)
1316 {
1317 	if (chan_is_logical(d40c))
1318 		return __d40_execute_command_log(d40c, command);
1319 	else
1320 		return __d40_execute_command_phy(d40c, command);
1321 }
1322 
1323 static u32 d40_get_prmo(struct d40_chan *d40c)
1324 {
1325 	static const unsigned int phy_map[] = {
1326 		[STEDMA40_PCHAN_BASIC_MODE]
1327 			= D40_DREG_PRMO_PCHAN_BASIC,
1328 		[STEDMA40_PCHAN_MODULO_MODE]
1329 			= D40_DREG_PRMO_PCHAN_MODULO,
1330 		[STEDMA40_PCHAN_DOUBLE_DST_MODE]
1331 			= D40_DREG_PRMO_PCHAN_DOUBLE_DST,
1332 	};
1333 	static const unsigned int log_map[] = {
1334 		[STEDMA40_LCHAN_SRC_PHY_DST_LOG]
1335 			= D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG,
1336 		[STEDMA40_LCHAN_SRC_LOG_DST_PHY]
1337 			= D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY,
1338 		[STEDMA40_LCHAN_SRC_LOG_DST_LOG]
1339 			= D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG,
1340 	};
1341 
1342 	if (chan_is_physical(d40c))
1343 		return phy_map[d40c->dma_cfg.mode_opt];
1344 	else
1345 		return log_map[d40c->dma_cfg.mode_opt];
1346 }
1347 
1348 static void d40_config_write(struct d40_chan *d40c)
1349 {
1350 	u32 addr_base;
1351 	u32 var;
1352 
1353 	/* Odd addresses are even addresses + 4 */
1354 	addr_base = (d40c->phy_chan->num % 2) * 4;
1355 	/* Setup channel mode to logical or physical */
1356 	var = ((u32)(chan_is_logical(d40c)) + 1) <<
1357 		D40_CHAN_POS(d40c->phy_chan->num);
1358 	writel(var, d40c->base->virtbase + D40_DREG_PRMSE + addr_base);
1359 
1360 	/* Setup operational mode option register */
1361 	var = d40_get_prmo(d40c) << D40_CHAN_POS(d40c->phy_chan->num);
1362 
1363 	writel(var, d40c->base->virtbase + D40_DREG_PRMOE + addr_base);
1364 
1365 	if (chan_is_logical(d40c)) {
1366 		int lidx = (d40c->phy_chan->num << D40_SREG_ELEM_LOG_LIDX_POS)
1367 			   & D40_SREG_ELEM_LOG_LIDX_MASK;
1368 		void __iomem *chanbase = chan_base(d40c);
1369 
1370 		/* Set default config for CFG reg */
1371 		writel(d40c->src_def_cfg, chanbase + D40_CHAN_REG_SSCFG);
1372 		writel(d40c->dst_def_cfg, chanbase + D40_CHAN_REG_SDCFG);
1373 
1374 		/* Set LIDX for lcla */
1375 		writel(lidx, chanbase + D40_CHAN_REG_SSELT);
1376 		writel(lidx, chanbase + D40_CHAN_REG_SDELT);
1377 
1378 		/* Clear LNK which will be used by d40_chan_has_events() */
1379 		writel(0, chanbase + D40_CHAN_REG_SSLNK);
1380 		writel(0, chanbase + D40_CHAN_REG_SDLNK);
1381 	}
1382 }
1383 
1384 static u32 d40_residue(struct d40_chan *d40c)
1385 {
1386 	u32 num_elt;
1387 
1388 	if (chan_is_logical(d40c))
1389 		num_elt = (readl(&d40c->lcpa->lcsp2) & D40_MEM_LCSP2_ECNT_MASK)
1390 			>> D40_MEM_LCSP2_ECNT_POS;
1391 	else {
1392 		u32 val = readl(chan_base(d40c) + D40_CHAN_REG_SDELT);
1393 		num_elt = (val & D40_SREG_ELEM_PHY_ECNT_MASK)
1394 			  >> D40_SREG_ELEM_PHY_ECNT_POS;
1395 	}
1396 
1397 	return num_elt * d40c->dma_cfg.dst_info.data_width;
1398 }
1399 
1400 static bool d40_tx_is_linked(struct d40_chan *d40c)
1401 {
1402 	bool is_link;
1403 
1404 	if (chan_is_logical(d40c))
1405 		is_link = readl(&d40c->lcpa->lcsp3) &  D40_MEM_LCSP3_DLOS_MASK;
1406 	else
1407 		is_link = readl(chan_base(d40c) + D40_CHAN_REG_SDLNK)
1408 			  & D40_SREG_LNK_PHYS_LNK_MASK;
1409 
1410 	return is_link;
1411 }
1412 
1413 static int d40_pause(struct dma_chan *chan)
1414 {
1415 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
1416 	int res = 0;
1417 	unsigned long flags;
1418 
1419 	if (d40c->phy_chan == NULL) {
1420 		chan_err(d40c, "Channel is not allocated!\n");
1421 		return -EINVAL;
1422 	}
1423 
1424 	if (!d40c->busy)
1425 		return 0;
1426 
1427 	spin_lock_irqsave(&d40c->lock, flags);
1428 	pm_runtime_get_sync(d40c->base->dev);
1429 
1430 	res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
1431 
1432 	pm_runtime_mark_last_busy(d40c->base->dev);
1433 	pm_runtime_put_autosuspend(d40c->base->dev);
1434 	spin_unlock_irqrestore(&d40c->lock, flags);
1435 	return res;
1436 }
1437 
1438 static int d40_resume(struct dma_chan *chan)
1439 {
1440 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
1441 	int res = 0;
1442 	unsigned long flags;
1443 
1444 	if (d40c->phy_chan == NULL) {
1445 		chan_err(d40c, "Channel is not allocated!\n");
1446 		return -EINVAL;
1447 	}
1448 
1449 	if (!d40c->busy)
1450 		return 0;
1451 
1452 	spin_lock_irqsave(&d40c->lock, flags);
1453 	pm_runtime_get_sync(d40c->base->dev);
1454 
1455 	/* If bytes left to transfer or linked tx resume job */
1456 	if (d40_residue(d40c) || d40_tx_is_linked(d40c))
1457 		res = d40_channel_execute_command(d40c, D40_DMA_RUN);
1458 
1459 	pm_runtime_mark_last_busy(d40c->base->dev);
1460 	pm_runtime_put_autosuspend(d40c->base->dev);
1461 	spin_unlock_irqrestore(&d40c->lock, flags);
1462 	return res;
1463 }
1464 
1465 static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx)
1466 {
1467 	struct d40_chan *d40c = container_of(tx->chan,
1468 					     struct d40_chan,
1469 					     chan);
1470 	struct d40_desc *d40d = container_of(tx, struct d40_desc, txd);
1471 	unsigned long flags;
1472 	dma_cookie_t cookie;
1473 
1474 	spin_lock_irqsave(&d40c->lock, flags);
1475 	cookie = dma_cookie_assign(tx);
1476 	d40_desc_queue(d40c, d40d);
1477 	spin_unlock_irqrestore(&d40c->lock, flags);
1478 
1479 	return cookie;
1480 }
1481 
1482 static int d40_start(struct d40_chan *d40c)
1483 {
1484 	return d40_channel_execute_command(d40c, D40_DMA_RUN);
1485 }
1486 
1487 static struct d40_desc *d40_queue_start(struct d40_chan *d40c)
1488 {
1489 	struct d40_desc *d40d;
1490 	int err;
1491 
1492 	/* Start queued jobs, if any */
1493 	d40d = d40_first_queued(d40c);
1494 
1495 	if (d40d != NULL) {
1496 		if (!d40c->busy) {
1497 			d40c->busy = true;
1498 			pm_runtime_get_sync(d40c->base->dev);
1499 		}
1500 
1501 		/* Remove from queue */
1502 		d40_desc_remove(d40d);
1503 
1504 		/* Add to active queue */
1505 		d40_desc_submit(d40c, d40d);
1506 
1507 		/* Initiate DMA job */
1508 		d40_desc_load(d40c, d40d);
1509 
1510 		/* Start dma job */
1511 		err = d40_start(d40c);
1512 
1513 		if (err)
1514 			return NULL;
1515 	}
1516 
1517 	return d40d;
1518 }
1519 
1520 /* called from interrupt context */
1521 static void dma_tc_handle(struct d40_chan *d40c)
1522 {
1523 	struct d40_desc *d40d;
1524 
1525 	/* Get first active entry from list */
1526 	d40d = d40_first_active_get(d40c);
1527 
1528 	if (d40d == NULL)
1529 		return;
1530 
1531 	if (d40d->cyclic) {
1532 		/*
1533 		 * If this was a paritially loaded list, we need to reloaded
1534 		 * it, and only when the list is completed.  We need to check
1535 		 * for done because the interrupt will hit for every link, and
1536 		 * not just the last one.
1537 		 */
1538 		if (d40d->lli_current < d40d->lli_len
1539 		    && !d40_tx_is_linked(d40c)
1540 		    && !d40_residue(d40c)) {
1541 			d40_lcla_free_all(d40c, d40d);
1542 			d40_desc_load(d40c, d40d);
1543 			(void) d40_start(d40c);
1544 
1545 			if (d40d->lli_current == d40d->lli_len)
1546 				d40d->lli_current = 0;
1547 		}
1548 	} else {
1549 		d40_lcla_free_all(d40c, d40d);
1550 
1551 		if (d40d->lli_current < d40d->lli_len) {
1552 			d40_desc_load(d40c, d40d);
1553 			/* Start dma job */
1554 			(void) d40_start(d40c);
1555 			return;
1556 		}
1557 
1558 		if (d40_queue_start(d40c) == NULL) {
1559 			d40c->busy = false;
1560 
1561 			pm_runtime_mark_last_busy(d40c->base->dev);
1562 			pm_runtime_put_autosuspend(d40c->base->dev);
1563 		}
1564 
1565 		d40_desc_remove(d40d);
1566 		d40_desc_done(d40c, d40d);
1567 	}
1568 
1569 	d40c->pending_tx++;
1570 	tasklet_schedule(&d40c->tasklet);
1571 
1572 }
1573 
1574 static void dma_tasklet(struct tasklet_struct *t)
1575 {
1576 	struct d40_chan *d40c = from_tasklet(d40c, t, tasklet);
1577 	struct d40_desc *d40d;
1578 	unsigned long flags;
1579 	bool callback_active;
1580 	struct dmaengine_desc_callback cb;
1581 
1582 	spin_lock_irqsave(&d40c->lock, flags);
1583 
1584 	/* Get first entry from the done list */
1585 	d40d = d40_first_done(d40c);
1586 	if (d40d == NULL) {
1587 		/* Check if we have reached here for cyclic job */
1588 		d40d = d40_first_active_get(d40c);
1589 		if (d40d == NULL || !d40d->cyclic)
1590 			goto check_pending_tx;
1591 	}
1592 
1593 	if (!d40d->cyclic)
1594 		dma_cookie_complete(&d40d->txd);
1595 
1596 	/*
1597 	 * If terminating a channel pending_tx is set to zero.
1598 	 * This prevents any finished active jobs to return to the client.
1599 	 */
1600 	if (d40c->pending_tx == 0) {
1601 		spin_unlock_irqrestore(&d40c->lock, flags);
1602 		return;
1603 	}
1604 
1605 	/* Callback to client */
1606 	callback_active = !!(d40d->txd.flags & DMA_PREP_INTERRUPT);
1607 	dmaengine_desc_get_callback(&d40d->txd, &cb);
1608 
1609 	if (!d40d->cyclic) {
1610 		if (async_tx_test_ack(&d40d->txd)) {
1611 			d40_desc_remove(d40d);
1612 			d40_desc_free(d40c, d40d);
1613 		} else if (!d40d->is_in_client_list) {
1614 			d40_desc_remove(d40d);
1615 			d40_lcla_free_all(d40c, d40d);
1616 			list_add_tail(&d40d->node, &d40c->client);
1617 			d40d->is_in_client_list = true;
1618 		}
1619 	}
1620 
1621 	d40c->pending_tx--;
1622 
1623 	if (d40c->pending_tx)
1624 		tasklet_schedule(&d40c->tasklet);
1625 
1626 	spin_unlock_irqrestore(&d40c->lock, flags);
1627 
1628 	if (callback_active)
1629 		dmaengine_desc_callback_invoke(&cb, NULL);
1630 
1631 	return;
1632  check_pending_tx:
1633 	/* Rescue manouver if receiving double interrupts */
1634 	if (d40c->pending_tx > 0)
1635 		d40c->pending_tx--;
1636 	spin_unlock_irqrestore(&d40c->lock, flags);
1637 }
1638 
1639 static irqreturn_t d40_handle_interrupt(int irq, void *data)
1640 {
1641 	int i;
1642 	u32 idx;
1643 	u32 row;
1644 	long chan = -1;
1645 	struct d40_chan *d40c;
1646 	struct d40_base *base = data;
1647 	u32 *regs = base->regs_interrupt;
1648 	struct d40_interrupt_lookup *il = base->gen_dmac.il;
1649 	u32 il_size = base->gen_dmac.il_size;
1650 
1651 	spin_lock(&base->interrupt_lock);
1652 
1653 	/* Read interrupt status of both logical and physical channels */
1654 	for (i = 0; i < il_size; i++)
1655 		regs[i] = readl(base->virtbase + il[i].src);
1656 
1657 	for (;;) {
1658 
1659 		chan = find_next_bit((unsigned long *)regs,
1660 				     BITS_PER_LONG * il_size, chan + 1);
1661 
1662 		/* No more set bits found? */
1663 		if (chan == BITS_PER_LONG * il_size)
1664 			break;
1665 
1666 		row = chan / BITS_PER_LONG;
1667 		idx = chan & (BITS_PER_LONG - 1);
1668 
1669 		if (il[row].offset == D40_PHY_CHAN)
1670 			d40c = base->lookup_phy_chans[idx];
1671 		else
1672 			d40c = base->lookup_log_chans[il[row].offset + idx];
1673 
1674 		if (!d40c) {
1675 			/*
1676 			 * No error because this can happen if something else
1677 			 * in the system is using the channel.
1678 			 */
1679 			continue;
1680 		}
1681 
1682 		/* ACK interrupt */
1683 		writel(BIT(idx), base->virtbase + il[row].clr);
1684 
1685 		spin_lock(&d40c->lock);
1686 
1687 		if (!il[row].is_error)
1688 			dma_tc_handle(d40c);
1689 		else
1690 			d40_err(base->dev, "IRQ chan: %ld offset %d idx %d\n",
1691 				chan, il[row].offset, idx);
1692 
1693 		spin_unlock(&d40c->lock);
1694 	}
1695 
1696 	spin_unlock(&base->interrupt_lock);
1697 
1698 	return IRQ_HANDLED;
1699 }
1700 
1701 static int d40_validate_conf(struct d40_chan *d40c,
1702 			     struct stedma40_chan_cfg *conf)
1703 {
1704 	int res = 0;
1705 	bool is_log = conf->mode == STEDMA40_MODE_LOGICAL;
1706 
1707 	if (!conf->dir) {
1708 		chan_err(d40c, "Invalid direction.\n");
1709 		res = -EINVAL;
1710 	}
1711 
1712 	if ((is_log && conf->dev_type > d40c->base->num_log_chans)  ||
1713 	    (!is_log && conf->dev_type > d40c->base->num_phy_chans) ||
1714 	    (conf->dev_type < 0)) {
1715 		chan_err(d40c, "Invalid device type (%d)\n", conf->dev_type);
1716 		res = -EINVAL;
1717 	}
1718 
1719 	if (conf->dir == DMA_DEV_TO_DEV) {
1720 		/*
1721 		 * DMAC HW supports it. Will be added to this driver,
1722 		 * in case any dma client requires it.
1723 		 */
1724 		chan_err(d40c, "periph to periph not supported\n");
1725 		res = -EINVAL;
1726 	}
1727 
1728 	if (d40_psize_2_burst_size(is_log, conf->src_info.psize) *
1729 	    conf->src_info.data_width !=
1730 	    d40_psize_2_burst_size(is_log, conf->dst_info.psize) *
1731 	    conf->dst_info.data_width) {
1732 		/*
1733 		 * The DMAC hardware only supports
1734 		 * src (burst x width) == dst (burst x width)
1735 		 */
1736 
1737 		chan_err(d40c, "src (burst x width) != dst (burst x width)\n");
1738 		res = -EINVAL;
1739 	}
1740 
1741 	return res;
1742 }
1743 
1744 static bool d40_alloc_mask_set(struct d40_phy_res *phy,
1745 			       bool is_src, int log_event_line, bool is_log,
1746 			       bool *first_user)
1747 {
1748 	unsigned long flags;
1749 	spin_lock_irqsave(&phy->lock, flags);
1750 
1751 	*first_user = ((phy->allocated_src | phy->allocated_dst)
1752 			== D40_ALLOC_FREE);
1753 
1754 	if (!is_log) {
1755 		/* Physical interrupts are masked per physical full channel */
1756 		if (phy->allocated_src == D40_ALLOC_FREE &&
1757 		    phy->allocated_dst == D40_ALLOC_FREE) {
1758 			phy->allocated_dst = D40_ALLOC_PHY;
1759 			phy->allocated_src = D40_ALLOC_PHY;
1760 			goto found_unlock;
1761 		} else
1762 			goto not_found_unlock;
1763 	}
1764 
1765 	/* Logical channel */
1766 	if (is_src) {
1767 		if (phy->allocated_src == D40_ALLOC_PHY)
1768 			goto not_found_unlock;
1769 
1770 		if (phy->allocated_src == D40_ALLOC_FREE)
1771 			phy->allocated_src = D40_ALLOC_LOG_FREE;
1772 
1773 		if (!(phy->allocated_src & BIT(log_event_line))) {
1774 			phy->allocated_src |= BIT(log_event_line);
1775 			goto found_unlock;
1776 		} else
1777 			goto not_found_unlock;
1778 	} else {
1779 		if (phy->allocated_dst == D40_ALLOC_PHY)
1780 			goto not_found_unlock;
1781 
1782 		if (phy->allocated_dst == D40_ALLOC_FREE)
1783 			phy->allocated_dst = D40_ALLOC_LOG_FREE;
1784 
1785 		if (!(phy->allocated_dst & BIT(log_event_line))) {
1786 			phy->allocated_dst |= BIT(log_event_line);
1787 			goto found_unlock;
1788 		}
1789 	}
1790  not_found_unlock:
1791 	spin_unlock_irqrestore(&phy->lock, flags);
1792 	return false;
1793  found_unlock:
1794 	spin_unlock_irqrestore(&phy->lock, flags);
1795 	return true;
1796 }
1797 
1798 static bool d40_alloc_mask_free(struct d40_phy_res *phy, bool is_src,
1799 			       int log_event_line)
1800 {
1801 	unsigned long flags;
1802 	bool is_free = false;
1803 
1804 	spin_lock_irqsave(&phy->lock, flags);
1805 	if (!log_event_line) {
1806 		phy->allocated_dst = D40_ALLOC_FREE;
1807 		phy->allocated_src = D40_ALLOC_FREE;
1808 		is_free = true;
1809 		goto unlock;
1810 	}
1811 
1812 	/* Logical channel */
1813 	if (is_src) {
1814 		phy->allocated_src &= ~BIT(log_event_line);
1815 		if (phy->allocated_src == D40_ALLOC_LOG_FREE)
1816 			phy->allocated_src = D40_ALLOC_FREE;
1817 	} else {
1818 		phy->allocated_dst &= ~BIT(log_event_line);
1819 		if (phy->allocated_dst == D40_ALLOC_LOG_FREE)
1820 			phy->allocated_dst = D40_ALLOC_FREE;
1821 	}
1822 
1823 	is_free = ((phy->allocated_src | phy->allocated_dst) ==
1824 		   D40_ALLOC_FREE);
1825  unlock:
1826 	spin_unlock_irqrestore(&phy->lock, flags);
1827 
1828 	return is_free;
1829 }
1830 
1831 static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
1832 {
1833 	int dev_type = d40c->dma_cfg.dev_type;
1834 	int event_group;
1835 	int event_line;
1836 	struct d40_phy_res *phys;
1837 	int i;
1838 	int j;
1839 	int log_num;
1840 	int num_phy_chans;
1841 	bool is_src;
1842 	bool is_log = d40c->dma_cfg.mode == STEDMA40_MODE_LOGICAL;
1843 
1844 	phys = d40c->base->phy_res;
1845 	num_phy_chans = d40c->base->num_phy_chans;
1846 
1847 	if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
1848 		log_num = 2 * dev_type;
1849 		is_src = true;
1850 	} else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
1851 		   d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
1852 		/* dst event lines are used for logical memcpy */
1853 		log_num = 2 * dev_type + 1;
1854 		is_src = false;
1855 	} else
1856 		return -EINVAL;
1857 
1858 	event_group = D40_TYPE_TO_GROUP(dev_type);
1859 	event_line = D40_TYPE_TO_EVENT(dev_type);
1860 
1861 	if (!is_log) {
1862 		if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
1863 			/* Find physical half channel */
1864 			if (d40c->dma_cfg.use_fixed_channel) {
1865 				i = d40c->dma_cfg.phy_channel;
1866 				if (d40_alloc_mask_set(&phys[i], is_src,
1867 						       0, is_log,
1868 						       first_phy_user))
1869 					goto found_phy;
1870 			} else {
1871 				for (i = 0; i < num_phy_chans; i++) {
1872 					if (d40_alloc_mask_set(&phys[i], is_src,
1873 						       0, is_log,
1874 						       first_phy_user))
1875 						goto found_phy;
1876 				}
1877 			}
1878 		} else
1879 			for (j = 0; j < d40c->base->num_phy_chans; j += 8) {
1880 				int phy_num = j  + event_group * 2;
1881 				for (i = phy_num; i < phy_num + 2; i++) {
1882 					if (d40_alloc_mask_set(&phys[i],
1883 							       is_src,
1884 							       0,
1885 							       is_log,
1886 							       first_phy_user))
1887 						goto found_phy;
1888 				}
1889 			}
1890 		return -EINVAL;
1891 found_phy:
1892 		d40c->phy_chan = &phys[i];
1893 		d40c->log_num = D40_PHY_CHAN;
1894 		goto out;
1895 	}
1896 	if (dev_type == -1)
1897 		return -EINVAL;
1898 
1899 	/* Find logical channel */
1900 	for (j = 0; j < d40c->base->num_phy_chans; j += 8) {
1901 		int phy_num = j + event_group * 2;
1902 
1903 		if (d40c->dma_cfg.use_fixed_channel) {
1904 			i = d40c->dma_cfg.phy_channel;
1905 
1906 			if ((i != phy_num) && (i != phy_num + 1)) {
1907 				dev_err(chan2dev(d40c),
1908 					"invalid fixed phy channel %d\n", i);
1909 				return -EINVAL;
1910 			}
1911 
1912 			if (d40_alloc_mask_set(&phys[i], is_src, event_line,
1913 					       is_log, first_phy_user))
1914 				goto found_log;
1915 
1916 			dev_err(chan2dev(d40c),
1917 				"could not allocate fixed phy channel %d\n", i);
1918 			return -EINVAL;
1919 		}
1920 
1921 		/*
1922 		 * Spread logical channels across all available physical rather
1923 		 * than pack every logical channel at the first available phy
1924 		 * channels.
1925 		 */
1926 		if (is_src) {
1927 			for (i = phy_num; i < phy_num + 2; i++) {
1928 				if (d40_alloc_mask_set(&phys[i], is_src,
1929 						       event_line, is_log,
1930 						       first_phy_user))
1931 					goto found_log;
1932 			}
1933 		} else {
1934 			for (i = phy_num + 1; i >= phy_num; i--) {
1935 				if (d40_alloc_mask_set(&phys[i], is_src,
1936 						       event_line, is_log,
1937 						       first_phy_user))
1938 					goto found_log;
1939 			}
1940 		}
1941 	}
1942 	return -EINVAL;
1943 
1944 found_log:
1945 	d40c->phy_chan = &phys[i];
1946 	d40c->log_num = log_num;
1947 out:
1948 
1949 	if (is_log)
1950 		d40c->base->lookup_log_chans[d40c->log_num] = d40c;
1951 	else
1952 		d40c->base->lookup_phy_chans[d40c->phy_chan->num] = d40c;
1953 
1954 	return 0;
1955 
1956 }
1957 
1958 static int d40_config_memcpy(struct d40_chan *d40c)
1959 {
1960 	dma_cap_mask_t cap = d40c->chan.device->cap_mask;
1961 
1962 	if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) {
1963 		d40c->dma_cfg = dma40_memcpy_conf_log;
1964 		d40c->dma_cfg.dev_type = dma40_memcpy_channels[d40c->chan.chan_id];
1965 
1966 		d40_log_cfg(&d40c->dma_cfg,
1967 			    &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
1968 
1969 	} else if (dma_has_cap(DMA_MEMCPY, cap) &&
1970 		   dma_has_cap(DMA_SLAVE, cap)) {
1971 		d40c->dma_cfg = dma40_memcpy_conf_phy;
1972 
1973 		/* Generate interrupt at end of transfer or relink. */
1974 		d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS);
1975 
1976 		/* Generate interrupt on error. */
1977 		d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
1978 		d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
1979 
1980 	} else {
1981 		chan_err(d40c, "No memcpy\n");
1982 		return -EINVAL;
1983 	}
1984 
1985 	return 0;
1986 }
1987 
1988 static int d40_free_dma(struct d40_chan *d40c)
1989 {
1990 
1991 	int res = 0;
1992 	u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
1993 	struct d40_phy_res *phy = d40c->phy_chan;
1994 	bool is_src;
1995 
1996 	/* Terminate all queued and active transfers */
1997 	d40_term_all(d40c);
1998 
1999 	if (phy == NULL) {
2000 		chan_err(d40c, "phy == null\n");
2001 		return -EINVAL;
2002 	}
2003 
2004 	if (phy->allocated_src == D40_ALLOC_FREE &&
2005 	    phy->allocated_dst == D40_ALLOC_FREE) {
2006 		chan_err(d40c, "channel already free\n");
2007 		return -EINVAL;
2008 	}
2009 
2010 	if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
2011 	    d40c->dma_cfg.dir == DMA_MEM_TO_MEM)
2012 		is_src = false;
2013 	else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
2014 		is_src = true;
2015 	else {
2016 		chan_err(d40c, "Unknown direction\n");
2017 		return -EINVAL;
2018 	}
2019 
2020 	pm_runtime_get_sync(d40c->base->dev);
2021 	res = d40_channel_execute_command(d40c, D40_DMA_STOP);
2022 	if (res) {
2023 		chan_err(d40c, "stop failed\n");
2024 		goto mark_last_busy;
2025 	}
2026 
2027 	d40_alloc_mask_free(phy, is_src, chan_is_logical(d40c) ? event : 0);
2028 
2029 	if (chan_is_logical(d40c))
2030 		d40c->base->lookup_log_chans[d40c->log_num] = NULL;
2031 	else
2032 		d40c->base->lookup_phy_chans[phy->num] = NULL;
2033 
2034 	if (d40c->busy) {
2035 		pm_runtime_mark_last_busy(d40c->base->dev);
2036 		pm_runtime_put_autosuspend(d40c->base->dev);
2037 	}
2038 
2039 	d40c->busy = false;
2040 	d40c->phy_chan = NULL;
2041 	d40c->configured = false;
2042  mark_last_busy:
2043 	pm_runtime_mark_last_busy(d40c->base->dev);
2044 	pm_runtime_put_autosuspend(d40c->base->dev);
2045 	return res;
2046 }
2047 
2048 static bool d40_is_paused(struct d40_chan *d40c)
2049 {
2050 	void __iomem *chanbase = chan_base(d40c);
2051 	bool is_paused = false;
2052 	unsigned long flags;
2053 	void __iomem *active_reg;
2054 	u32 status;
2055 	u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
2056 
2057 	spin_lock_irqsave(&d40c->lock, flags);
2058 
2059 	if (chan_is_physical(d40c)) {
2060 		if (d40c->phy_chan->num % 2 == 0)
2061 			active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
2062 		else
2063 			active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
2064 
2065 		status = (readl(active_reg) &
2066 			  D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
2067 			D40_CHAN_POS(d40c->phy_chan->num);
2068 		if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP)
2069 			is_paused = true;
2070 		goto unlock;
2071 	}
2072 
2073 	if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
2074 	    d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
2075 		status = readl(chanbase + D40_CHAN_REG_SDLNK);
2076 	} else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
2077 		status = readl(chanbase + D40_CHAN_REG_SSLNK);
2078 	} else {
2079 		chan_err(d40c, "Unknown direction\n");
2080 		goto unlock;
2081 	}
2082 
2083 	status = (status & D40_EVENTLINE_MASK(event)) >>
2084 		D40_EVENTLINE_POS(event);
2085 
2086 	if (status != D40_DMA_RUN)
2087 		is_paused = true;
2088  unlock:
2089 	spin_unlock_irqrestore(&d40c->lock, flags);
2090 	return is_paused;
2091 
2092 }
2093 
2094 static u32 stedma40_residue(struct dma_chan *chan)
2095 {
2096 	struct d40_chan *d40c =
2097 		container_of(chan, struct d40_chan, chan);
2098 	u32 bytes_left;
2099 	unsigned long flags;
2100 
2101 	spin_lock_irqsave(&d40c->lock, flags);
2102 	bytes_left = d40_residue(d40c);
2103 	spin_unlock_irqrestore(&d40c->lock, flags);
2104 
2105 	return bytes_left;
2106 }
2107 
2108 static int
2109 d40_prep_sg_log(struct d40_chan *chan, struct d40_desc *desc,
2110 		struct scatterlist *sg_src, struct scatterlist *sg_dst,
2111 		unsigned int sg_len, dma_addr_t src_dev_addr,
2112 		dma_addr_t dst_dev_addr)
2113 {
2114 	struct stedma40_chan_cfg *cfg = &chan->dma_cfg;
2115 	struct stedma40_half_channel_info *src_info = &cfg->src_info;
2116 	struct stedma40_half_channel_info *dst_info = &cfg->dst_info;
2117 	int ret;
2118 
2119 	ret = d40_log_sg_to_lli(sg_src, sg_len,
2120 				src_dev_addr,
2121 				desc->lli_log.src,
2122 				chan->log_def.lcsp1,
2123 				src_info->data_width,
2124 				dst_info->data_width);
2125 
2126 	ret = d40_log_sg_to_lli(sg_dst, sg_len,
2127 				dst_dev_addr,
2128 				desc->lli_log.dst,
2129 				chan->log_def.lcsp3,
2130 				dst_info->data_width,
2131 				src_info->data_width);
2132 
2133 	return ret < 0 ? ret : 0;
2134 }
2135 
2136 static int
2137 d40_prep_sg_phy(struct d40_chan *chan, struct d40_desc *desc,
2138 		struct scatterlist *sg_src, struct scatterlist *sg_dst,
2139 		unsigned int sg_len, dma_addr_t src_dev_addr,
2140 		dma_addr_t dst_dev_addr)
2141 {
2142 	struct stedma40_chan_cfg *cfg = &chan->dma_cfg;
2143 	struct stedma40_half_channel_info *src_info = &cfg->src_info;
2144 	struct stedma40_half_channel_info *dst_info = &cfg->dst_info;
2145 	unsigned long flags = 0;
2146 	int ret;
2147 
2148 	if (desc->cyclic)
2149 		flags |= LLI_CYCLIC | LLI_TERM_INT;
2150 
2151 	ret = d40_phy_sg_to_lli(sg_src, sg_len, src_dev_addr,
2152 				desc->lli_phy.src,
2153 				virt_to_phys(desc->lli_phy.src),
2154 				chan->src_def_cfg,
2155 				src_info, dst_info, flags);
2156 
2157 	ret = d40_phy_sg_to_lli(sg_dst, sg_len, dst_dev_addr,
2158 				desc->lli_phy.dst,
2159 				virt_to_phys(desc->lli_phy.dst),
2160 				chan->dst_def_cfg,
2161 				dst_info, src_info, flags);
2162 
2163 	dma_sync_single_for_device(chan->base->dev, desc->lli_pool.dma_addr,
2164 				   desc->lli_pool.size, DMA_TO_DEVICE);
2165 
2166 	return ret < 0 ? ret : 0;
2167 }
2168 
2169 static struct d40_desc *
2170 d40_prep_desc(struct d40_chan *chan, struct scatterlist *sg,
2171 	      unsigned int sg_len, unsigned long dma_flags)
2172 {
2173 	struct stedma40_chan_cfg *cfg;
2174 	struct d40_desc *desc;
2175 	int ret;
2176 
2177 	desc = d40_desc_get(chan);
2178 	if (!desc)
2179 		return NULL;
2180 
2181 	cfg = &chan->dma_cfg;
2182 	desc->lli_len = d40_sg_2_dmalen(sg, sg_len, cfg->src_info.data_width,
2183 					cfg->dst_info.data_width);
2184 	if (desc->lli_len < 0) {
2185 		chan_err(chan, "Unaligned size\n");
2186 		goto free_desc;
2187 	}
2188 
2189 	ret = d40_pool_lli_alloc(chan, desc, desc->lli_len);
2190 	if (ret < 0) {
2191 		chan_err(chan, "Could not allocate lli\n");
2192 		goto free_desc;
2193 	}
2194 
2195 	desc->lli_current = 0;
2196 	desc->txd.flags = dma_flags;
2197 	desc->txd.tx_submit = d40_tx_submit;
2198 
2199 	dma_async_tx_descriptor_init(&desc->txd, &chan->chan);
2200 
2201 	return desc;
2202  free_desc:
2203 	d40_desc_free(chan, desc);
2204 	return NULL;
2205 }
2206 
2207 static struct dma_async_tx_descriptor *
2208 d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src,
2209 	    struct scatterlist *sg_dst, unsigned int sg_len,
2210 	    enum dma_transfer_direction direction, unsigned long dma_flags)
2211 {
2212 	struct d40_chan *chan = container_of(dchan, struct d40_chan, chan);
2213 	dma_addr_t src_dev_addr;
2214 	dma_addr_t dst_dev_addr;
2215 	struct d40_desc *desc;
2216 	unsigned long flags;
2217 	int ret;
2218 
2219 	if (!chan->phy_chan) {
2220 		chan_err(chan, "Cannot prepare unallocated channel\n");
2221 		return NULL;
2222 	}
2223 
2224 	d40_set_runtime_config_write(dchan, &chan->slave_config, direction);
2225 
2226 	spin_lock_irqsave(&chan->lock, flags);
2227 
2228 	desc = d40_prep_desc(chan, sg_src, sg_len, dma_flags);
2229 	if (desc == NULL)
2230 		goto unlock;
2231 
2232 	if (sg_next(&sg_src[sg_len - 1]) == sg_src)
2233 		desc->cyclic = true;
2234 
2235 	src_dev_addr = 0;
2236 	dst_dev_addr = 0;
2237 	if (direction == DMA_DEV_TO_MEM)
2238 		src_dev_addr = chan->runtime_addr;
2239 	else if (direction == DMA_MEM_TO_DEV)
2240 		dst_dev_addr = chan->runtime_addr;
2241 
2242 	if (chan_is_logical(chan))
2243 		ret = d40_prep_sg_log(chan, desc, sg_src, sg_dst,
2244 				      sg_len, src_dev_addr, dst_dev_addr);
2245 	else
2246 		ret = d40_prep_sg_phy(chan, desc, sg_src, sg_dst,
2247 				      sg_len, src_dev_addr, dst_dev_addr);
2248 
2249 	if (ret) {
2250 		chan_err(chan, "Failed to prepare %s sg job: %d\n",
2251 			 chan_is_logical(chan) ? "log" : "phy", ret);
2252 		goto free_desc;
2253 	}
2254 
2255 	/*
2256 	 * add descriptor to the prepare queue in order to be able
2257 	 * to free them later in terminate_all
2258 	 */
2259 	list_add_tail(&desc->node, &chan->prepare_queue);
2260 
2261 	spin_unlock_irqrestore(&chan->lock, flags);
2262 
2263 	return &desc->txd;
2264  free_desc:
2265 	d40_desc_free(chan, desc);
2266  unlock:
2267 	spin_unlock_irqrestore(&chan->lock, flags);
2268 	return NULL;
2269 }
2270 
2271 bool stedma40_filter(struct dma_chan *chan, void *data)
2272 {
2273 	struct stedma40_chan_cfg *info = data;
2274 	struct d40_chan *d40c =
2275 		container_of(chan, struct d40_chan, chan);
2276 	int err;
2277 
2278 	if (data) {
2279 		err = d40_validate_conf(d40c, info);
2280 		if (!err)
2281 			d40c->dma_cfg = *info;
2282 	} else
2283 		err = d40_config_memcpy(d40c);
2284 
2285 	if (!err)
2286 		d40c->configured = true;
2287 
2288 	return err == 0;
2289 }
2290 EXPORT_SYMBOL(stedma40_filter);
2291 
2292 static void __d40_set_prio_rt(struct d40_chan *d40c, int dev_type, bool src)
2293 {
2294 	bool realtime = d40c->dma_cfg.realtime;
2295 	bool highprio = d40c->dma_cfg.high_priority;
2296 	u32 rtreg;
2297 	u32 event = D40_TYPE_TO_EVENT(dev_type);
2298 	u32 group = D40_TYPE_TO_GROUP(dev_type);
2299 	u32 bit = BIT(event);
2300 	u32 prioreg;
2301 	struct d40_gen_dmac *dmac = &d40c->base->gen_dmac;
2302 
2303 	rtreg = realtime ? dmac->realtime_en : dmac->realtime_clear;
2304 	/*
2305 	 * Due to a hardware bug, in some cases a logical channel triggered by
2306 	 * a high priority destination event line can generate extra packet
2307 	 * transactions.
2308 	 *
2309 	 * The workaround is to not set the high priority level for the
2310 	 * destination event lines that trigger logical channels.
2311 	 */
2312 	if (!src && chan_is_logical(d40c))
2313 		highprio = false;
2314 
2315 	prioreg = highprio ? dmac->high_prio_en : dmac->high_prio_clear;
2316 
2317 	/* Destination event lines are stored in the upper halfword */
2318 	if (!src)
2319 		bit <<= 16;
2320 
2321 	writel(bit, d40c->base->virtbase + prioreg + group * 4);
2322 	writel(bit, d40c->base->virtbase + rtreg + group * 4);
2323 }
2324 
2325 static void d40_set_prio_realtime(struct d40_chan *d40c)
2326 {
2327 	if (d40c->base->rev < 3)
2328 		return;
2329 
2330 	if ((d40c->dma_cfg.dir ==  DMA_DEV_TO_MEM) ||
2331 	    (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
2332 		__d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true);
2333 
2334 	if ((d40c->dma_cfg.dir ==  DMA_MEM_TO_DEV) ||
2335 	    (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
2336 		__d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false);
2337 }
2338 
2339 #define D40_DT_FLAGS_MODE(flags)       ((flags >> 0) & 0x1)
2340 #define D40_DT_FLAGS_DIR(flags)        ((flags >> 1) & 0x1)
2341 #define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1)
2342 #define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1)
2343 #define D40_DT_FLAGS_HIGH_PRIO(flags)  ((flags >> 4) & 0x1)
2344 
2345 static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec,
2346 				  struct of_dma *ofdma)
2347 {
2348 	struct stedma40_chan_cfg cfg;
2349 	dma_cap_mask_t cap;
2350 	u32 flags;
2351 
2352 	memset(&cfg, 0, sizeof(struct stedma40_chan_cfg));
2353 
2354 	dma_cap_zero(cap);
2355 	dma_cap_set(DMA_SLAVE, cap);
2356 
2357 	cfg.dev_type = dma_spec->args[0];
2358 	flags = dma_spec->args[2];
2359 
2360 	switch (D40_DT_FLAGS_MODE(flags)) {
2361 	case 0: cfg.mode = STEDMA40_MODE_LOGICAL; break;
2362 	case 1: cfg.mode = STEDMA40_MODE_PHYSICAL; break;
2363 	}
2364 
2365 	switch (D40_DT_FLAGS_DIR(flags)) {
2366 	case 0:
2367 		cfg.dir = DMA_MEM_TO_DEV;
2368 		cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
2369 		break;
2370 	case 1:
2371 		cfg.dir = DMA_DEV_TO_MEM;
2372 		cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
2373 		break;
2374 	}
2375 
2376 	if (D40_DT_FLAGS_FIXED_CHAN(flags)) {
2377 		cfg.phy_channel = dma_spec->args[1];
2378 		cfg.use_fixed_channel = true;
2379 	}
2380 
2381 	if (D40_DT_FLAGS_HIGH_PRIO(flags))
2382 		cfg.high_priority = true;
2383 
2384 	return dma_request_channel(cap, stedma40_filter, &cfg);
2385 }
2386 
2387 /* DMA ENGINE functions */
2388 static int d40_alloc_chan_resources(struct dma_chan *chan)
2389 {
2390 	int err;
2391 	unsigned long flags;
2392 	struct d40_chan *d40c =
2393 		container_of(chan, struct d40_chan, chan);
2394 	bool is_free_phy;
2395 	spin_lock_irqsave(&d40c->lock, flags);
2396 
2397 	dma_cookie_init(chan);
2398 
2399 	/* If no dma configuration is set use default configuration (memcpy) */
2400 	if (!d40c->configured) {
2401 		err = d40_config_memcpy(d40c);
2402 		if (err) {
2403 			chan_err(d40c, "Failed to configure memcpy channel\n");
2404 			goto mark_last_busy;
2405 		}
2406 	}
2407 
2408 	err = d40_allocate_channel(d40c, &is_free_phy);
2409 	if (err) {
2410 		chan_err(d40c, "Failed to allocate channel\n");
2411 		d40c->configured = false;
2412 		goto mark_last_busy;
2413 	}
2414 
2415 	pm_runtime_get_sync(d40c->base->dev);
2416 
2417 	d40_set_prio_realtime(d40c);
2418 
2419 	if (chan_is_logical(d40c)) {
2420 		if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
2421 			d40c->lcpa = d40c->base->lcpa_base +
2422 				d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE;
2423 		else
2424 			d40c->lcpa = d40c->base->lcpa_base +
2425 				d40c->dma_cfg.dev_type *
2426 				D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA;
2427 
2428 		/* Unmask the Global Interrupt Mask. */
2429 		d40c->src_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS);
2430 		d40c->dst_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS);
2431 	}
2432 
2433 	dev_dbg(chan2dev(d40c), "allocated %s channel (phy %d%s)\n",
2434 		 chan_is_logical(d40c) ? "logical" : "physical",
2435 		 d40c->phy_chan->num,
2436 		 d40c->dma_cfg.use_fixed_channel ? ", fixed" : "");
2437 
2438 
2439 	/*
2440 	 * Only write channel configuration to the DMA if the physical
2441 	 * resource is free. In case of multiple logical channels
2442 	 * on the same physical resource, only the first write is necessary.
2443 	 */
2444 	if (is_free_phy)
2445 		d40_config_write(d40c);
2446  mark_last_busy:
2447 	pm_runtime_mark_last_busy(d40c->base->dev);
2448 	pm_runtime_put_autosuspend(d40c->base->dev);
2449 	spin_unlock_irqrestore(&d40c->lock, flags);
2450 	return err;
2451 }
2452 
2453 static void d40_free_chan_resources(struct dma_chan *chan)
2454 {
2455 	struct d40_chan *d40c =
2456 		container_of(chan, struct d40_chan, chan);
2457 	int err;
2458 	unsigned long flags;
2459 
2460 	if (d40c->phy_chan == NULL) {
2461 		chan_err(d40c, "Cannot free unallocated channel\n");
2462 		return;
2463 	}
2464 
2465 	spin_lock_irqsave(&d40c->lock, flags);
2466 
2467 	err = d40_free_dma(d40c);
2468 
2469 	if (err)
2470 		chan_err(d40c, "Failed to free channel\n");
2471 	spin_unlock_irqrestore(&d40c->lock, flags);
2472 }
2473 
2474 static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan,
2475 						       dma_addr_t dst,
2476 						       dma_addr_t src,
2477 						       size_t size,
2478 						       unsigned long dma_flags)
2479 {
2480 	struct scatterlist dst_sg;
2481 	struct scatterlist src_sg;
2482 
2483 	sg_init_table(&dst_sg, 1);
2484 	sg_init_table(&src_sg, 1);
2485 
2486 	sg_dma_address(&dst_sg) = dst;
2487 	sg_dma_address(&src_sg) = src;
2488 
2489 	sg_dma_len(&dst_sg) = size;
2490 	sg_dma_len(&src_sg) = size;
2491 
2492 	return d40_prep_sg(chan, &src_sg, &dst_sg, 1,
2493 			   DMA_MEM_TO_MEM, dma_flags);
2494 }
2495 
2496 static struct dma_async_tx_descriptor *
2497 d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2498 		  unsigned int sg_len, enum dma_transfer_direction direction,
2499 		  unsigned long dma_flags, void *context)
2500 {
2501 	if (!is_slave_direction(direction))
2502 		return NULL;
2503 
2504 	return d40_prep_sg(chan, sgl, sgl, sg_len, direction, dma_flags);
2505 }
2506 
2507 static struct dma_async_tx_descriptor *
2508 dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr,
2509 		     size_t buf_len, size_t period_len,
2510 		     enum dma_transfer_direction direction, unsigned long flags)
2511 {
2512 	unsigned int periods = buf_len / period_len;
2513 	struct dma_async_tx_descriptor *txd;
2514 	struct scatterlist *sg;
2515 	int i;
2516 
2517 	sg = kcalloc(periods + 1, sizeof(struct scatterlist), GFP_NOWAIT);
2518 	if (!sg)
2519 		return NULL;
2520 
2521 	for (i = 0; i < periods; i++) {
2522 		sg_dma_address(&sg[i]) = dma_addr;
2523 		sg_dma_len(&sg[i]) = period_len;
2524 		dma_addr += period_len;
2525 	}
2526 
2527 	sg_chain(sg, periods + 1, sg);
2528 
2529 	txd = d40_prep_sg(chan, sg, sg, periods, direction,
2530 			  DMA_PREP_INTERRUPT);
2531 
2532 	kfree(sg);
2533 
2534 	return txd;
2535 }
2536 
2537 static enum dma_status d40_tx_status(struct dma_chan *chan,
2538 				     dma_cookie_t cookie,
2539 				     struct dma_tx_state *txstate)
2540 {
2541 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2542 	enum dma_status ret;
2543 
2544 	if (d40c->phy_chan == NULL) {
2545 		chan_err(d40c, "Cannot read status of unallocated channel\n");
2546 		return -EINVAL;
2547 	}
2548 
2549 	ret = dma_cookie_status(chan, cookie, txstate);
2550 	if (ret != DMA_COMPLETE && txstate)
2551 		dma_set_residue(txstate, stedma40_residue(chan));
2552 
2553 	if (d40_is_paused(d40c))
2554 		ret = DMA_PAUSED;
2555 
2556 	return ret;
2557 }
2558 
2559 static void d40_issue_pending(struct dma_chan *chan)
2560 {
2561 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2562 	unsigned long flags;
2563 
2564 	if (d40c->phy_chan == NULL) {
2565 		chan_err(d40c, "Channel is not allocated!\n");
2566 		return;
2567 	}
2568 
2569 	spin_lock_irqsave(&d40c->lock, flags);
2570 
2571 	list_splice_tail_init(&d40c->pending_queue, &d40c->queue);
2572 
2573 	/* Busy means that queued jobs are already being processed */
2574 	if (!d40c->busy)
2575 		(void) d40_queue_start(d40c);
2576 
2577 	spin_unlock_irqrestore(&d40c->lock, flags);
2578 }
2579 
2580 static int d40_terminate_all(struct dma_chan *chan)
2581 {
2582 	unsigned long flags;
2583 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2584 	int ret;
2585 
2586 	if (d40c->phy_chan == NULL) {
2587 		chan_err(d40c, "Channel is not allocated!\n");
2588 		return -EINVAL;
2589 	}
2590 
2591 	spin_lock_irqsave(&d40c->lock, flags);
2592 
2593 	pm_runtime_get_sync(d40c->base->dev);
2594 	ret = d40_channel_execute_command(d40c, D40_DMA_STOP);
2595 	if (ret)
2596 		chan_err(d40c, "Failed to stop channel\n");
2597 
2598 	d40_term_all(d40c);
2599 	pm_runtime_mark_last_busy(d40c->base->dev);
2600 	pm_runtime_put_autosuspend(d40c->base->dev);
2601 	if (d40c->busy) {
2602 		pm_runtime_mark_last_busy(d40c->base->dev);
2603 		pm_runtime_put_autosuspend(d40c->base->dev);
2604 	}
2605 	d40c->busy = false;
2606 
2607 	spin_unlock_irqrestore(&d40c->lock, flags);
2608 	return 0;
2609 }
2610 
2611 static int
2612 dma40_config_to_halfchannel(struct d40_chan *d40c,
2613 			    struct stedma40_half_channel_info *info,
2614 			    u32 maxburst)
2615 {
2616 	int psize;
2617 
2618 	if (chan_is_logical(d40c)) {
2619 		if (maxburst >= 16)
2620 			psize = STEDMA40_PSIZE_LOG_16;
2621 		else if (maxburst >= 8)
2622 			psize = STEDMA40_PSIZE_LOG_8;
2623 		else if (maxburst >= 4)
2624 			psize = STEDMA40_PSIZE_LOG_4;
2625 		else
2626 			psize = STEDMA40_PSIZE_LOG_1;
2627 	} else {
2628 		if (maxburst >= 16)
2629 			psize = STEDMA40_PSIZE_PHY_16;
2630 		else if (maxburst >= 8)
2631 			psize = STEDMA40_PSIZE_PHY_8;
2632 		else if (maxburst >= 4)
2633 			psize = STEDMA40_PSIZE_PHY_4;
2634 		else
2635 			psize = STEDMA40_PSIZE_PHY_1;
2636 	}
2637 
2638 	info->psize = psize;
2639 	info->flow_ctrl = STEDMA40_NO_FLOW_CTRL;
2640 
2641 	return 0;
2642 }
2643 
2644 static int d40_set_runtime_config(struct dma_chan *chan,
2645 				  struct dma_slave_config *config)
2646 {
2647 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2648 
2649 	memcpy(&d40c->slave_config, config, sizeof(*config));
2650 
2651 	return 0;
2652 }
2653 
2654 /* Runtime reconfiguration extension */
2655 static int d40_set_runtime_config_write(struct dma_chan *chan,
2656 				  struct dma_slave_config *config,
2657 				  enum dma_transfer_direction direction)
2658 {
2659 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2660 	struct stedma40_chan_cfg *cfg = &d40c->dma_cfg;
2661 	enum dma_slave_buswidth src_addr_width, dst_addr_width;
2662 	dma_addr_t config_addr;
2663 	u32 src_maxburst, dst_maxburst;
2664 	int ret;
2665 
2666 	if (d40c->phy_chan == NULL) {
2667 		chan_err(d40c, "Channel is not allocated!\n");
2668 		return -EINVAL;
2669 	}
2670 
2671 	src_addr_width = config->src_addr_width;
2672 	src_maxburst = config->src_maxburst;
2673 	dst_addr_width = config->dst_addr_width;
2674 	dst_maxburst = config->dst_maxburst;
2675 
2676 	if (direction == DMA_DEV_TO_MEM) {
2677 		config_addr = config->src_addr;
2678 
2679 		if (cfg->dir != DMA_DEV_TO_MEM)
2680 			dev_dbg(d40c->base->dev,
2681 				"channel was not configured for peripheral "
2682 				"to memory transfer (%d) overriding\n",
2683 				cfg->dir);
2684 		cfg->dir = DMA_DEV_TO_MEM;
2685 
2686 		/* Configure the memory side */
2687 		if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
2688 			dst_addr_width = src_addr_width;
2689 		if (dst_maxburst == 0)
2690 			dst_maxburst = src_maxburst;
2691 
2692 	} else if (direction == DMA_MEM_TO_DEV) {
2693 		config_addr = config->dst_addr;
2694 
2695 		if (cfg->dir != DMA_MEM_TO_DEV)
2696 			dev_dbg(d40c->base->dev,
2697 				"channel was not configured for memory "
2698 				"to peripheral transfer (%d) overriding\n",
2699 				cfg->dir);
2700 		cfg->dir = DMA_MEM_TO_DEV;
2701 
2702 		/* Configure the memory side */
2703 		if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
2704 			src_addr_width = dst_addr_width;
2705 		if (src_maxburst == 0)
2706 			src_maxburst = dst_maxburst;
2707 	} else {
2708 		dev_err(d40c->base->dev,
2709 			"unrecognized channel direction %d\n",
2710 			direction);
2711 		return -EINVAL;
2712 	}
2713 
2714 	if (config_addr <= 0) {
2715 		dev_err(d40c->base->dev, "no address supplied\n");
2716 		return -EINVAL;
2717 	}
2718 
2719 	if (src_maxburst * src_addr_width != dst_maxburst * dst_addr_width) {
2720 		dev_err(d40c->base->dev,
2721 			"src/dst width/maxburst mismatch: %d*%d != %d*%d\n",
2722 			src_maxburst,
2723 			src_addr_width,
2724 			dst_maxburst,
2725 			dst_addr_width);
2726 		return -EINVAL;
2727 	}
2728 
2729 	if (src_maxburst > 16) {
2730 		src_maxburst = 16;
2731 		dst_maxburst = src_maxburst * src_addr_width / dst_addr_width;
2732 	} else if (dst_maxburst > 16) {
2733 		dst_maxburst = 16;
2734 		src_maxburst = dst_maxburst * dst_addr_width / src_addr_width;
2735 	}
2736 
2737 	/* Only valid widths are; 1, 2, 4 and 8. */
2738 	if (src_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
2739 	    src_addr_width >  DMA_SLAVE_BUSWIDTH_8_BYTES   ||
2740 	    dst_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
2741 	    dst_addr_width >  DMA_SLAVE_BUSWIDTH_8_BYTES   ||
2742 	    !is_power_of_2(src_addr_width) ||
2743 	    !is_power_of_2(dst_addr_width))
2744 		return -EINVAL;
2745 
2746 	cfg->src_info.data_width = src_addr_width;
2747 	cfg->dst_info.data_width = dst_addr_width;
2748 
2749 	ret = dma40_config_to_halfchannel(d40c, &cfg->src_info,
2750 					  src_maxburst);
2751 	if (ret)
2752 		return ret;
2753 
2754 	ret = dma40_config_to_halfchannel(d40c, &cfg->dst_info,
2755 					  dst_maxburst);
2756 	if (ret)
2757 		return ret;
2758 
2759 	/* Fill in register values */
2760 	if (chan_is_logical(d40c))
2761 		d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
2762 	else
2763 		d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg);
2764 
2765 	/* These settings will take precedence later */
2766 	d40c->runtime_addr = config_addr;
2767 	d40c->runtime_direction = direction;
2768 	dev_dbg(d40c->base->dev,
2769 		"configured channel %s for %s, data width %d/%d, "
2770 		"maxburst %d/%d elements, LE, no flow control\n",
2771 		dma_chan_name(chan),
2772 		(direction == DMA_DEV_TO_MEM) ? "RX" : "TX",
2773 		src_addr_width, dst_addr_width,
2774 		src_maxburst, dst_maxburst);
2775 
2776 	return 0;
2777 }
2778 
2779 /* Initialization functions */
2780 
2781 static void __init d40_chan_init(struct d40_base *base, struct dma_device *dma,
2782 				 struct d40_chan *chans, int offset,
2783 				 int num_chans)
2784 {
2785 	int i = 0;
2786 	struct d40_chan *d40c;
2787 
2788 	INIT_LIST_HEAD(&dma->channels);
2789 
2790 	for (i = offset; i < offset + num_chans; i++) {
2791 		d40c = &chans[i];
2792 		d40c->base = base;
2793 		d40c->chan.device = dma;
2794 
2795 		spin_lock_init(&d40c->lock);
2796 
2797 		d40c->log_num = D40_PHY_CHAN;
2798 
2799 		INIT_LIST_HEAD(&d40c->done);
2800 		INIT_LIST_HEAD(&d40c->active);
2801 		INIT_LIST_HEAD(&d40c->queue);
2802 		INIT_LIST_HEAD(&d40c->pending_queue);
2803 		INIT_LIST_HEAD(&d40c->client);
2804 		INIT_LIST_HEAD(&d40c->prepare_queue);
2805 
2806 		tasklet_setup(&d40c->tasklet, dma_tasklet);
2807 
2808 		list_add_tail(&d40c->chan.device_node,
2809 			      &dma->channels);
2810 	}
2811 }
2812 
2813 static void d40_ops_init(struct d40_base *base, struct dma_device *dev)
2814 {
2815 	if (dma_has_cap(DMA_SLAVE, dev->cap_mask)) {
2816 		dev->device_prep_slave_sg = d40_prep_slave_sg;
2817 		dev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
2818 	}
2819 
2820 	if (dma_has_cap(DMA_MEMCPY, dev->cap_mask)) {
2821 		dev->device_prep_dma_memcpy = d40_prep_memcpy;
2822 		dev->directions = BIT(DMA_MEM_TO_MEM);
2823 		/*
2824 		 * This controller can only access address at even
2825 		 * 32bit boundaries, i.e. 2^2
2826 		 */
2827 		dev->copy_align = DMAENGINE_ALIGN_4_BYTES;
2828 	}
2829 
2830 	if (dma_has_cap(DMA_CYCLIC, dev->cap_mask))
2831 		dev->device_prep_dma_cyclic = dma40_prep_dma_cyclic;
2832 
2833 	dev->device_alloc_chan_resources = d40_alloc_chan_resources;
2834 	dev->device_free_chan_resources = d40_free_chan_resources;
2835 	dev->device_issue_pending = d40_issue_pending;
2836 	dev->device_tx_status = d40_tx_status;
2837 	dev->device_config = d40_set_runtime_config;
2838 	dev->device_pause = d40_pause;
2839 	dev->device_resume = d40_resume;
2840 	dev->device_terminate_all = d40_terminate_all;
2841 	dev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
2842 	dev->dev = base->dev;
2843 }
2844 
2845 static int __init d40_dmaengine_init(struct d40_base *base,
2846 				     int num_reserved_chans)
2847 {
2848 	int err ;
2849 
2850 	d40_chan_init(base, &base->dma_slave, base->log_chans,
2851 		      0, base->num_log_chans);
2852 
2853 	dma_cap_zero(base->dma_slave.cap_mask);
2854 	dma_cap_set(DMA_SLAVE, base->dma_slave.cap_mask);
2855 	dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask);
2856 
2857 	d40_ops_init(base, &base->dma_slave);
2858 
2859 	err = dmaenginem_async_device_register(&base->dma_slave);
2860 
2861 	if (err) {
2862 		d40_err(base->dev, "Failed to register slave channels\n");
2863 		goto exit;
2864 	}
2865 
2866 	d40_chan_init(base, &base->dma_memcpy, base->log_chans,
2867 		      base->num_log_chans, base->num_memcpy_chans);
2868 
2869 	dma_cap_zero(base->dma_memcpy.cap_mask);
2870 	dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask);
2871 
2872 	d40_ops_init(base, &base->dma_memcpy);
2873 
2874 	err = dmaenginem_async_device_register(&base->dma_memcpy);
2875 
2876 	if (err) {
2877 		d40_err(base->dev,
2878 			"Failed to register memcpy only channels\n");
2879 		goto exit;
2880 	}
2881 
2882 	d40_chan_init(base, &base->dma_both, base->phy_chans,
2883 		      0, num_reserved_chans);
2884 
2885 	dma_cap_zero(base->dma_both.cap_mask);
2886 	dma_cap_set(DMA_SLAVE, base->dma_both.cap_mask);
2887 	dma_cap_set(DMA_MEMCPY, base->dma_both.cap_mask);
2888 	dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask);
2889 
2890 	d40_ops_init(base, &base->dma_both);
2891 	err = dmaenginem_async_device_register(&base->dma_both);
2892 
2893 	if (err) {
2894 		d40_err(base->dev,
2895 			"Failed to register logical and physical capable channels\n");
2896 		goto exit;
2897 	}
2898 	return 0;
2899  exit:
2900 	return err;
2901 }
2902 
2903 /* Suspend resume functionality */
2904 #ifdef CONFIG_PM_SLEEP
2905 static int dma40_suspend(struct device *dev)
2906 {
2907 	struct d40_base *base = dev_get_drvdata(dev);
2908 	int ret;
2909 
2910 	ret = pm_runtime_force_suspend(dev);
2911 	if (ret)
2912 		return ret;
2913 
2914 	if (base->lcpa_regulator)
2915 		ret = regulator_disable(base->lcpa_regulator);
2916 	return ret;
2917 }
2918 
2919 static int dma40_resume(struct device *dev)
2920 {
2921 	struct d40_base *base = dev_get_drvdata(dev);
2922 	int ret = 0;
2923 
2924 	if (base->lcpa_regulator) {
2925 		ret = regulator_enable(base->lcpa_regulator);
2926 		if (ret)
2927 			return ret;
2928 	}
2929 
2930 	return pm_runtime_force_resume(dev);
2931 }
2932 #endif
2933 
2934 #ifdef CONFIG_PM
2935 static void dma40_backup(void __iomem *baseaddr, u32 *backup,
2936 			 u32 *regaddr, int num, bool save)
2937 {
2938 	int i;
2939 
2940 	for (i = 0; i < num; i++) {
2941 		void __iomem *addr = baseaddr + regaddr[i];
2942 
2943 		if (save)
2944 			backup[i] = readl_relaxed(addr);
2945 		else
2946 			writel_relaxed(backup[i], addr);
2947 	}
2948 }
2949 
2950 static void d40_save_restore_registers(struct d40_base *base, bool save)
2951 {
2952 	int i;
2953 
2954 	/* Save/Restore channel specific registers */
2955 	for (i = 0; i < base->num_phy_chans; i++) {
2956 		void __iomem *addr;
2957 		int idx;
2958 
2959 		if (base->phy_res[i].reserved)
2960 			continue;
2961 
2962 		addr = base->virtbase + D40_DREG_PCBASE + i * D40_DREG_PCDELTA;
2963 		idx = i * ARRAY_SIZE(d40_backup_regs_chan);
2964 
2965 		dma40_backup(addr, &base->reg_val_backup_chan[idx],
2966 			     d40_backup_regs_chan,
2967 			     ARRAY_SIZE(d40_backup_regs_chan),
2968 			     save);
2969 	}
2970 
2971 	/* Save/Restore global registers */
2972 	dma40_backup(base->virtbase, base->reg_val_backup,
2973 		     d40_backup_regs, ARRAY_SIZE(d40_backup_regs),
2974 		     save);
2975 
2976 	/* Save/Restore registers only existing on dma40 v3 and later */
2977 	if (base->gen_dmac.backup)
2978 		dma40_backup(base->virtbase, base->reg_val_backup_v4,
2979 			     base->gen_dmac.backup,
2980 			base->gen_dmac.backup_size,
2981 			save);
2982 }
2983 
2984 static int dma40_runtime_suspend(struct device *dev)
2985 {
2986 	struct d40_base *base = dev_get_drvdata(dev);
2987 
2988 	d40_save_restore_registers(base, true);
2989 
2990 	/* Don't disable/enable clocks for v1 due to HW bugs */
2991 	if (base->rev != 1)
2992 		writel_relaxed(base->gcc_pwr_off_mask,
2993 			       base->virtbase + D40_DREG_GCC);
2994 
2995 	return 0;
2996 }
2997 
2998 static int dma40_runtime_resume(struct device *dev)
2999 {
3000 	struct d40_base *base = dev_get_drvdata(dev);
3001 
3002 	d40_save_restore_registers(base, false);
3003 
3004 	writel_relaxed(D40_DREG_GCC_ENABLE_ALL,
3005 		       base->virtbase + D40_DREG_GCC);
3006 	return 0;
3007 }
3008 #endif
3009 
3010 static const struct dev_pm_ops dma40_pm_ops = {
3011 	SET_LATE_SYSTEM_SLEEP_PM_OPS(dma40_suspend, dma40_resume)
3012 	SET_RUNTIME_PM_OPS(dma40_runtime_suspend,
3013 				dma40_runtime_resume,
3014 				NULL)
3015 };
3016 
3017 /* Initialization functions. */
3018 
3019 static int __init d40_phy_res_init(struct d40_base *base)
3020 {
3021 	int i;
3022 	int num_phy_chans_avail = 0;
3023 	u32 val[2];
3024 	int odd_even_bit = -2;
3025 	int gcc = D40_DREG_GCC_ENA;
3026 
3027 	val[0] = readl(base->virtbase + D40_DREG_PRSME);
3028 	val[1] = readl(base->virtbase + D40_DREG_PRSMO);
3029 
3030 	for (i = 0; i < base->num_phy_chans; i++) {
3031 		base->phy_res[i].num = i;
3032 		odd_even_bit += 2 * ((i % 2) == 0);
3033 		if (((val[i % 2] >> odd_even_bit) & 3) == 1) {
3034 			/* Mark security only channels as occupied */
3035 			base->phy_res[i].allocated_src = D40_ALLOC_PHY;
3036 			base->phy_res[i].allocated_dst = D40_ALLOC_PHY;
3037 			base->phy_res[i].reserved = true;
3038 			gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i),
3039 						       D40_DREG_GCC_SRC);
3040 			gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i),
3041 						       D40_DREG_GCC_DST);
3042 
3043 
3044 		} else {
3045 			base->phy_res[i].allocated_src = D40_ALLOC_FREE;
3046 			base->phy_res[i].allocated_dst = D40_ALLOC_FREE;
3047 			base->phy_res[i].reserved = false;
3048 			num_phy_chans_avail++;
3049 		}
3050 		spin_lock_init(&base->phy_res[i].lock);
3051 	}
3052 
3053 	/* Mark disabled channels as occupied */
3054 	for (i = 0; base->plat_data->disabled_channels[i] != -1; i++) {
3055 		int chan = base->plat_data->disabled_channels[i];
3056 
3057 		base->phy_res[chan].allocated_src = D40_ALLOC_PHY;
3058 		base->phy_res[chan].allocated_dst = D40_ALLOC_PHY;
3059 		base->phy_res[chan].reserved = true;
3060 		gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan),
3061 					       D40_DREG_GCC_SRC);
3062 		gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan),
3063 					       D40_DREG_GCC_DST);
3064 		num_phy_chans_avail--;
3065 	}
3066 
3067 	/* Mark soft_lli channels */
3068 	for (i = 0; i < base->plat_data->num_of_soft_lli_chans; i++) {
3069 		int chan = base->plat_data->soft_lli_chans[i];
3070 
3071 		base->phy_res[chan].use_soft_lli = true;
3072 	}
3073 
3074 	dev_info(base->dev, "%d of %d physical DMA channels available\n",
3075 		 num_phy_chans_avail, base->num_phy_chans);
3076 
3077 	/* Verify settings extended vs standard */
3078 	val[0] = readl(base->virtbase + D40_DREG_PRTYP);
3079 
3080 	for (i = 0; i < base->num_phy_chans; i++) {
3081 
3082 		if (base->phy_res[i].allocated_src == D40_ALLOC_FREE &&
3083 		    (val[0] & 0x3) != 1)
3084 			dev_info(base->dev,
3085 				 "[%s] INFO: channel %d is misconfigured (%d)\n",
3086 				 __func__, i, val[0] & 0x3);
3087 
3088 		val[0] = val[0] >> 2;
3089 	}
3090 
3091 	/*
3092 	 * To keep things simple, Enable all clocks initially.
3093 	 * The clocks will get managed later post channel allocation.
3094 	 * The clocks for the event lines on which reserved channels exists
3095 	 * are not managed here.
3096 	 */
3097 	writel(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC);
3098 	base->gcc_pwr_off_mask = gcc;
3099 
3100 	return num_phy_chans_avail;
3101 }
3102 
3103 static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
3104 {
3105 	struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev);
3106 	struct clk *clk;
3107 	void __iomem *virtbase;
3108 	struct resource *res;
3109 	struct d40_base *base;
3110 	int num_log_chans;
3111 	int num_phy_chans;
3112 	int num_memcpy_chans;
3113 	int clk_ret = -EINVAL;
3114 	int i;
3115 	u32 pid;
3116 	u32 cid;
3117 	u8 rev;
3118 
3119 	clk = clk_get(&pdev->dev, NULL);
3120 	if (IS_ERR(clk)) {
3121 		d40_err(&pdev->dev, "No matching clock found\n");
3122 		goto check_prepare_enabled;
3123 	}
3124 
3125 	clk_ret = clk_prepare_enable(clk);
3126 	if (clk_ret) {
3127 		d40_err(&pdev->dev, "Failed to prepare/enable clock\n");
3128 		goto disable_unprepare;
3129 	}
3130 
3131 	/* Get IO for DMAC base address */
3132 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "base");
3133 	if (!res)
3134 		goto disable_unprepare;
3135 
3136 	if (request_mem_region(res->start, resource_size(res),
3137 			       D40_NAME " I/O base") == NULL)
3138 		goto release_region;
3139 
3140 	virtbase = ioremap(res->start, resource_size(res));
3141 	if (!virtbase)
3142 		goto release_region;
3143 
3144 	/* This is just a regular AMBA PrimeCell ID actually */
3145 	for (pid = 0, i = 0; i < 4; i++)
3146 		pid |= (readl(virtbase + resource_size(res) - 0x20 + 4 * i)
3147 			& 255) << (i * 8);
3148 	for (cid = 0, i = 0; i < 4; i++)
3149 		cid |= (readl(virtbase + resource_size(res) - 0x10 + 4 * i)
3150 			& 255) << (i * 8);
3151 
3152 	if (cid != AMBA_CID) {
3153 		d40_err(&pdev->dev, "Unknown hardware! No PrimeCell ID\n");
3154 		goto unmap_io;
3155 	}
3156 	if (AMBA_MANF_BITS(pid) != AMBA_VENDOR_ST) {
3157 		d40_err(&pdev->dev, "Unknown designer! Got %x wanted %x\n",
3158 			AMBA_MANF_BITS(pid),
3159 			AMBA_VENDOR_ST);
3160 		goto unmap_io;
3161 	}
3162 	/*
3163 	 * HW revision:
3164 	 * DB8500ed has revision 0
3165 	 * ? has revision 1
3166 	 * DB8500v1 has revision 2
3167 	 * DB8500v2 has revision 3
3168 	 * AP9540v1 has revision 4
3169 	 * DB8540v1 has revision 4
3170 	 */
3171 	rev = AMBA_REV_BITS(pid);
3172 	if (rev < 2) {
3173 		d40_err(&pdev->dev, "hardware revision: %d is not supported", rev);
3174 		goto unmap_io;
3175 	}
3176 
3177 	/* The number of physical channels on this HW */
3178 	if (plat_data->num_of_phy_chans)
3179 		num_phy_chans = plat_data->num_of_phy_chans;
3180 	else
3181 		num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4;
3182 
3183 	/* The number of channels used for memcpy */
3184 	if (plat_data->num_of_memcpy_chans)
3185 		num_memcpy_chans = plat_data->num_of_memcpy_chans;
3186 	else
3187 		num_memcpy_chans = ARRAY_SIZE(dma40_memcpy_channels);
3188 
3189 	num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY;
3190 
3191 	dev_info(&pdev->dev,
3192 		 "hardware rev: %d @ %pa with %d physical and %d logical channels\n",
3193 		 rev, &res->start, num_phy_chans, num_log_chans);
3194 
3195 	base = kzalloc(ALIGN(sizeof(struct d40_base), 4) +
3196 		       (num_phy_chans + num_log_chans + num_memcpy_chans) *
3197 		       sizeof(struct d40_chan), GFP_KERNEL);
3198 
3199 	if (base == NULL)
3200 		goto unmap_io;
3201 
3202 	base->rev = rev;
3203 	base->clk = clk;
3204 	base->num_memcpy_chans = num_memcpy_chans;
3205 	base->num_phy_chans = num_phy_chans;
3206 	base->num_log_chans = num_log_chans;
3207 	base->phy_start = res->start;
3208 	base->phy_size = resource_size(res);
3209 	base->virtbase = virtbase;
3210 	base->plat_data = plat_data;
3211 	base->dev = &pdev->dev;
3212 	base->phy_chans = ((void *)base) + ALIGN(sizeof(struct d40_base), 4);
3213 	base->log_chans = &base->phy_chans[num_phy_chans];
3214 
3215 	if (base->plat_data->num_of_phy_chans == 14) {
3216 		base->gen_dmac.backup = d40_backup_regs_v4b;
3217 		base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4B;
3218 		base->gen_dmac.interrupt_en = D40_DREG_CPCMIS;
3219 		base->gen_dmac.interrupt_clear = D40_DREG_CPCICR;
3220 		base->gen_dmac.realtime_en = D40_DREG_CRSEG1;
3221 		base->gen_dmac.realtime_clear = D40_DREG_CRCEG1;
3222 		base->gen_dmac.high_prio_en = D40_DREG_CPSEG1;
3223 		base->gen_dmac.high_prio_clear = D40_DREG_CPCEG1;
3224 		base->gen_dmac.il = il_v4b;
3225 		base->gen_dmac.il_size = ARRAY_SIZE(il_v4b);
3226 		base->gen_dmac.init_reg = dma_init_reg_v4b;
3227 		base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4b);
3228 	} else {
3229 		if (base->rev >= 3) {
3230 			base->gen_dmac.backup = d40_backup_regs_v4a;
3231 			base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4A;
3232 		}
3233 		base->gen_dmac.interrupt_en = D40_DREG_PCMIS;
3234 		base->gen_dmac.interrupt_clear = D40_DREG_PCICR;
3235 		base->gen_dmac.realtime_en = D40_DREG_RSEG1;
3236 		base->gen_dmac.realtime_clear = D40_DREG_RCEG1;
3237 		base->gen_dmac.high_prio_en = D40_DREG_PSEG1;
3238 		base->gen_dmac.high_prio_clear = D40_DREG_PCEG1;
3239 		base->gen_dmac.il = il_v4a;
3240 		base->gen_dmac.il_size = ARRAY_SIZE(il_v4a);
3241 		base->gen_dmac.init_reg = dma_init_reg_v4a;
3242 		base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4a);
3243 	}
3244 
3245 	base->phy_res = kcalloc(num_phy_chans,
3246 				sizeof(*base->phy_res),
3247 				GFP_KERNEL);
3248 	if (!base->phy_res)
3249 		goto free_base;
3250 
3251 	base->lookup_phy_chans = kcalloc(num_phy_chans,
3252 					 sizeof(*base->lookup_phy_chans),
3253 					 GFP_KERNEL);
3254 	if (!base->lookup_phy_chans)
3255 		goto free_phy_res;
3256 
3257 	base->lookup_log_chans = kcalloc(num_log_chans,
3258 					 sizeof(*base->lookup_log_chans),
3259 					 GFP_KERNEL);
3260 	if (!base->lookup_log_chans)
3261 		goto free_phy_chans;
3262 
3263 	base->reg_val_backup_chan = kmalloc_array(base->num_phy_chans,
3264 						  sizeof(d40_backup_regs_chan),
3265 						  GFP_KERNEL);
3266 	if (!base->reg_val_backup_chan)
3267 		goto free_log_chans;
3268 
3269 	base->lcla_pool.alloc_map = kcalloc(num_phy_chans
3270 					    * D40_LCLA_LINK_PER_EVENT_GRP,
3271 					    sizeof(*base->lcla_pool.alloc_map),
3272 					    GFP_KERNEL);
3273 	if (!base->lcla_pool.alloc_map)
3274 		goto free_backup_chan;
3275 
3276 	base->regs_interrupt = kmalloc_array(base->gen_dmac.il_size,
3277 					     sizeof(*base->regs_interrupt),
3278 					     GFP_KERNEL);
3279 	if (!base->regs_interrupt)
3280 		goto free_map;
3281 
3282 	base->desc_slab = kmem_cache_create(D40_NAME, sizeof(struct d40_desc),
3283 					    0, SLAB_HWCACHE_ALIGN,
3284 					    NULL);
3285 	if (base->desc_slab == NULL)
3286 		goto free_regs;
3287 
3288 
3289 	return base;
3290  free_regs:
3291 	kfree(base->regs_interrupt);
3292  free_map:
3293 	kfree(base->lcla_pool.alloc_map);
3294  free_backup_chan:
3295 	kfree(base->reg_val_backup_chan);
3296  free_log_chans:
3297 	kfree(base->lookup_log_chans);
3298  free_phy_chans:
3299 	kfree(base->lookup_phy_chans);
3300  free_phy_res:
3301 	kfree(base->phy_res);
3302  free_base:
3303 	kfree(base);
3304  unmap_io:
3305 	iounmap(virtbase);
3306  release_region:
3307 	release_mem_region(res->start, resource_size(res));
3308  check_prepare_enabled:
3309 	if (!clk_ret)
3310  disable_unprepare:
3311 		clk_disable_unprepare(clk);
3312 	if (!IS_ERR(clk))
3313 		clk_put(clk);
3314 	return NULL;
3315 }
3316 
3317 static void __init d40_hw_init(struct d40_base *base)
3318 {
3319 
3320 	int i;
3321 	u32 prmseo[2] = {0, 0};
3322 	u32 activeo[2] = {0xFFFFFFFF, 0xFFFFFFFF};
3323 	u32 pcmis = 0;
3324 	u32 pcicr = 0;
3325 	struct d40_reg_val *dma_init_reg = base->gen_dmac.init_reg;
3326 	u32 reg_size = base->gen_dmac.init_reg_size;
3327 
3328 	for (i = 0; i < reg_size; i++)
3329 		writel(dma_init_reg[i].val,
3330 		       base->virtbase + dma_init_reg[i].reg);
3331 
3332 	/* Configure all our dma channels to default settings */
3333 	for (i = 0; i < base->num_phy_chans; i++) {
3334 
3335 		activeo[i % 2] = activeo[i % 2] << 2;
3336 
3337 		if (base->phy_res[base->num_phy_chans - i - 1].allocated_src
3338 		    == D40_ALLOC_PHY) {
3339 			activeo[i % 2] |= 3;
3340 			continue;
3341 		}
3342 
3343 		/* Enable interrupt # */
3344 		pcmis = (pcmis << 1) | 1;
3345 
3346 		/* Clear interrupt # */
3347 		pcicr = (pcicr << 1) | 1;
3348 
3349 		/* Set channel to physical mode */
3350 		prmseo[i % 2] = prmseo[i % 2] << 2;
3351 		prmseo[i % 2] |= 1;
3352 
3353 	}
3354 
3355 	writel(prmseo[1], base->virtbase + D40_DREG_PRMSE);
3356 	writel(prmseo[0], base->virtbase + D40_DREG_PRMSO);
3357 	writel(activeo[1], base->virtbase + D40_DREG_ACTIVE);
3358 	writel(activeo[0], base->virtbase + D40_DREG_ACTIVO);
3359 
3360 	/* Write which interrupt to enable */
3361 	writel(pcmis, base->virtbase + base->gen_dmac.interrupt_en);
3362 
3363 	/* Write which interrupt to clear */
3364 	writel(pcicr, base->virtbase + base->gen_dmac.interrupt_clear);
3365 
3366 	/* These are __initdata and cannot be accessed after init */
3367 	base->gen_dmac.init_reg = NULL;
3368 	base->gen_dmac.init_reg_size = 0;
3369 }
3370 
3371 static int __init d40_lcla_allocate(struct d40_base *base)
3372 {
3373 	struct d40_lcla_pool *pool = &base->lcla_pool;
3374 	unsigned long *page_list;
3375 	int i, j;
3376 	int ret;
3377 
3378 	/*
3379 	 * This is somewhat ugly. We need 8192 bytes that are 18 bit aligned,
3380 	 * To full fill this hardware requirement without wasting 256 kb
3381 	 * we allocate pages until we get an aligned one.
3382 	 */
3383 	page_list = kmalloc_array(MAX_LCLA_ALLOC_ATTEMPTS,
3384 				  sizeof(*page_list),
3385 				  GFP_KERNEL);
3386 	if (!page_list)
3387 		return -ENOMEM;
3388 
3389 	/* Calculating how many pages that are required */
3390 	base->lcla_pool.pages = SZ_1K * base->num_phy_chans / PAGE_SIZE;
3391 
3392 	for (i = 0; i < MAX_LCLA_ALLOC_ATTEMPTS; i++) {
3393 		page_list[i] = __get_free_pages(GFP_KERNEL,
3394 						base->lcla_pool.pages);
3395 		if (!page_list[i]) {
3396 
3397 			d40_err(base->dev, "Failed to allocate %d pages.\n",
3398 				base->lcla_pool.pages);
3399 			ret = -ENOMEM;
3400 
3401 			for (j = 0; j < i; j++)
3402 				free_pages(page_list[j], base->lcla_pool.pages);
3403 			goto free_page_list;
3404 		}
3405 
3406 		if ((virt_to_phys((void *)page_list[i]) &
3407 		     (LCLA_ALIGNMENT - 1)) == 0)
3408 			break;
3409 	}
3410 
3411 	for (j = 0; j < i; j++)
3412 		free_pages(page_list[j], base->lcla_pool.pages);
3413 
3414 	if (i < MAX_LCLA_ALLOC_ATTEMPTS) {
3415 		base->lcla_pool.base = (void *)page_list[i];
3416 	} else {
3417 		/*
3418 		 * After many attempts and no succees with finding the correct
3419 		 * alignment, try with allocating a big buffer.
3420 		 */
3421 		dev_warn(base->dev,
3422 			 "[%s] Failed to get %d pages @ 18 bit align.\n",
3423 			 __func__, base->lcla_pool.pages);
3424 		base->lcla_pool.base_unaligned = kmalloc(SZ_1K *
3425 							 base->num_phy_chans +
3426 							 LCLA_ALIGNMENT,
3427 							 GFP_KERNEL);
3428 		if (!base->lcla_pool.base_unaligned) {
3429 			ret = -ENOMEM;
3430 			goto free_page_list;
3431 		}
3432 
3433 		base->lcla_pool.base = PTR_ALIGN(base->lcla_pool.base_unaligned,
3434 						 LCLA_ALIGNMENT);
3435 	}
3436 
3437 	pool->dma_addr = dma_map_single(base->dev, pool->base,
3438 					SZ_1K * base->num_phy_chans,
3439 					DMA_TO_DEVICE);
3440 	if (dma_mapping_error(base->dev, pool->dma_addr)) {
3441 		pool->dma_addr = 0;
3442 		ret = -ENOMEM;
3443 		goto free_page_list;
3444 	}
3445 
3446 	writel(virt_to_phys(base->lcla_pool.base),
3447 	       base->virtbase + D40_DREG_LCLA);
3448 	ret = 0;
3449  free_page_list:
3450 	kfree(page_list);
3451 	return ret;
3452 }
3453 
3454 static int __init d40_of_probe(struct platform_device *pdev,
3455 			       struct device_node *np)
3456 {
3457 	struct stedma40_platform_data *pdata;
3458 	int num_phy = 0, num_memcpy = 0, num_disabled = 0;
3459 	const __be32 *list;
3460 
3461 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
3462 	if (!pdata)
3463 		return -ENOMEM;
3464 
3465 	/* If absent this value will be obtained from h/w. */
3466 	of_property_read_u32(np, "dma-channels", &num_phy);
3467 	if (num_phy > 0)
3468 		pdata->num_of_phy_chans = num_phy;
3469 
3470 	list = of_get_property(np, "memcpy-channels", &num_memcpy);
3471 	num_memcpy /= sizeof(*list);
3472 
3473 	if (num_memcpy > D40_MEMCPY_MAX_CHANS || num_memcpy <= 0) {
3474 		d40_err(&pdev->dev,
3475 			"Invalid number of memcpy channels specified (%d)\n",
3476 			num_memcpy);
3477 		return -EINVAL;
3478 	}
3479 	pdata->num_of_memcpy_chans = num_memcpy;
3480 
3481 	of_property_read_u32_array(np, "memcpy-channels",
3482 				   dma40_memcpy_channels,
3483 				   num_memcpy);
3484 
3485 	list = of_get_property(np, "disabled-channels", &num_disabled);
3486 	num_disabled /= sizeof(*list);
3487 
3488 	if (num_disabled >= STEDMA40_MAX_PHYS || num_disabled < 0) {
3489 		d40_err(&pdev->dev,
3490 			"Invalid number of disabled channels specified (%d)\n",
3491 			num_disabled);
3492 		return -EINVAL;
3493 	}
3494 
3495 	of_property_read_u32_array(np, "disabled-channels",
3496 				   pdata->disabled_channels,
3497 				   num_disabled);
3498 	pdata->disabled_channels[num_disabled] = -1;
3499 
3500 	pdev->dev.platform_data = pdata;
3501 
3502 	return 0;
3503 }
3504 
3505 static int __init d40_probe(struct platform_device *pdev)
3506 {
3507 	struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev);
3508 	struct device_node *np = pdev->dev.of_node;
3509 	int ret = -ENOENT;
3510 	struct d40_base *base;
3511 	struct resource *res;
3512 	int num_reserved_chans;
3513 	u32 val;
3514 
3515 	if (!plat_data) {
3516 		if (np) {
3517 			if (d40_of_probe(pdev, np)) {
3518 				ret = -ENOMEM;
3519 				goto report_failure;
3520 			}
3521 		} else {
3522 			d40_err(&pdev->dev, "No pdata or Device Tree provided\n");
3523 			goto report_failure;
3524 		}
3525 	}
3526 
3527 	base = d40_hw_detect_init(pdev);
3528 	if (!base)
3529 		goto report_failure;
3530 
3531 	num_reserved_chans = d40_phy_res_init(base);
3532 
3533 	platform_set_drvdata(pdev, base);
3534 
3535 	spin_lock_init(&base->interrupt_lock);
3536 	spin_lock_init(&base->execmd_lock);
3537 
3538 	/* Get IO for logical channel parameter address */
3539 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lcpa");
3540 	if (!res) {
3541 		ret = -ENOENT;
3542 		d40_err(&pdev->dev, "No \"lcpa\" memory resource\n");
3543 		goto destroy_cache;
3544 	}
3545 	base->lcpa_size = resource_size(res);
3546 	base->phy_lcpa = res->start;
3547 
3548 	if (request_mem_region(res->start, resource_size(res),
3549 			       D40_NAME " I/O lcpa") == NULL) {
3550 		ret = -EBUSY;
3551 		d40_err(&pdev->dev, "Failed to request LCPA region %pR\n", res);
3552 		goto destroy_cache;
3553 	}
3554 
3555 	/* We make use of ESRAM memory for this. */
3556 	val = readl(base->virtbase + D40_DREG_LCPA);
3557 	if (res->start != val && val != 0) {
3558 		dev_warn(&pdev->dev,
3559 			 "[%s] Mismatch LCPA dma 0x%x, def %pa\n",
3560 			 __func__, val, &res->start);
3561 	} else
3562 		writel(res->start, base->virtbase + D40_DREG_LCPA);
3563 
3564 	base->lcpa_base = ioremap(res->start, resource_size(res));
3565 	if (!base->lcpa_base) {
3566 		ret = -ENOMEM;
3567 		d40_err(&pdev->dev, "Failed to ioremap LCPA region\n");
3568 		goto destroy_cache;
3569 	}
3570 	/* If lcla has to be located in ESRAM we don't need to allocate */
3571 	if (base->plat_data->use_esram_lcla) {
3572 		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
3573 							"lcla_esram");
3574 		if (!res) {
3575 			ret = -ENOENT;
3576 			d40_err(&pdev->dev,
3577 				"No \"lcla_esram\" memory resource\n");
3578 			goto destroy_cache;
3579 		}
3580 		base->lcla_pool.base = ioremap(res->start,
3581 						resource_size(res));
3582 		if (!base->lcla_pool.base) {
3583 			ret = -ENOMEM;
3584 			d40_err(&pdev->dev, "Failed to ioremap LCLA region\n");
3585 			goto destroy_cache;
3586 		}
3587 		writel(res->start, base->virtbase + D40_DREG_LCLA);
3588 
3589 	} else {
3590 		ret = d40_lcla_allocate(base);
3591 		if (ret) {
3592 			d40_err(&pdev->dev, "Failed to allocate LCLA area\n");
3593 			goto destroy_cache;
3594 		}
3595 	}
3596 
3597 	spin_lock_init(&base->lcla_pool.lock);
3598 
3599 	base->irq = platform_get_irq(pdev, 0);
3600 
3601 	ret = request_irq(base->irq, d40_handle_interrupt, 0, D40_NAME, base);
3602 	if (ret) {
3603 		d40_err(&pdev->dev, "No IRQ defined\n");
3604 		goto destroy_cache;
3605 	}
3606 
3607 	if (base->plat_data->use_esram_lcla) {
3608 
3609 		base->lcpa_regulator = regulator_get(base->dev, "lcla_esram");
3610 		if (IS_ERR(base->lcpa_regulator)) {
3611 			d40_err(&pdev->dev, "Failed to get lcpa_regulator\n");
3612 			ret = PTR_ERR(base->lcpa_regulator);
3613 			base->lcpa_regulator = NULL;
3614 			goto destroy_cache;
3615 		}
3616 
3617 		ret = regulator_enable(base->lcpa_regulator);
3618 		if (ret) {
3619 			d40_err(&pdev->dev,
3620 				"Failed to enable lcpa_regulator\n");
3621 			regulator_put(base->lcpa_regulator);
3622 			base->lcpa_regulator = NULL;
3623 			goto destroy_cache;
3624 		}
3625 	}
3626 
3627 	writel_relaxed(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC);
3628 
3629 	pm_runtime_irq_safe(base->dev);
3630 	pm_runtime_set_autosuspend_delay(base->dev, DMA40_AUTOSUSPEND_DELAY);
3631 	pm_runtime_use_autosuspend(base->dev);
3632 	pm_runtime_mark_last_busy(base->dev);
3633 	pm_runtime_set_active(base->dev);
3634 	pm_runtime_enable(base->dev);
3635 
3636 	ret = d40_dmaengine_init(base, num_reserved_chans);
3637 	if (ret)
3638 		goto destroy_cache;
3639 
3640 	ret = dma_set_max_seg_size(base->dev, STEDMA40_MAX_SEG_SIZE);
3641 	if (ret) {
3642 		d40_err(&pdev->dev, "Failed to set dma max seg size\n");
3643 		goto destroy_cache;
3644 	}
3645 
3646 	d40_hw_init(base);
3647 
3648 	if (np) {
3649 		ret = of_dma_controller_register(np, d40_xlate, NULL);
3650 		if (ret)
3651 			dev_err(&pdev->dev,
3652 				"could not register of_dma_controller\n");
3653 	}
3654 
3655 	dev_info(base->dev, "initialized\n");
3656 	return 0;
3657  destroy_cache:
3658 	kmem_cache_destroy(base->desc_slab);
3659 	if (base->virtbase)
3660 		iounmap(base->virtbase);
3661 
3662 	if (base->lcla_pool.base && base->plat_data->use_esram_lcla) {
3663 		iounmap(base->lcla_pool.base);
3664 		base->lcla_pool.base = NULL;
3665 	}
3666 
3667 	if (base->lcla_pool.dma_addr)
3668 		dma_unmap_single(base->dev, base->lcla_pool.dma_addr,
3669 				 SZ_1K * base->num_phy_chans,
3670 				 DMA_TO_DEVICE);
3671 
3672 	if (!base->lcla_pool.base_unaligned && base->lcla_pool.base)
3673 		free_pages((unsigned long)base->lcla_pool.base,
3674 			   base->lcla_pool.pages);
3675 
3676 	kfree(base->lcla_pool.base_unaligned);
3677 
3678 	if (base->lcpa_base)
3679 		iounmap(base->lcpa_base);
3680 
3681 	if (base->phy_lcpa)
3682 		release_mem_region(base->phy_lcpa,
3683 				   base->lcpa_size);
3684 	if (base->phy_start)
3685 		release_mem_region(base->phy_start,
3686 				   base->phy_size);
3687 	if (base->clk) {
3688 		clk_disable_unprepare(base->clk);
3689 		clk_put(base->clk);
3690 	}
3691 
3692 	if (base->lcpa_regulator) {
3693 		regulator_disable(base->lcpa_regulator);
3694 		regulator_put(base->lcpa_regulator);
3695 	}
3696 
3697 	kfree(base->lcla_pool.alloc_map);
3698 	kfree(base->lookup_log_chans);
3699 	kfree(base->lookup_phy_chans);
3700 	kfree(base->phy_res);
3701 	kfree(base);
3702  report_failure:
3703 	d40_err(&pdev->dev, "probe failed\n");
3704 	return ret;
3705 }
3706 
3707 static const struct of_device_id d40_match[] = {
3708         { .compatible = "stericsson,dma40", },
3709         {}
3710 };
3711 
3712 static struct platform_driver d40_driver = {
3713 	.driver = {
3714 		.name  = D40_NAME,
3715 		.pm = &dma40_pm_ops,
3716 		.of_match_table = d40_match,
3717 	},
3718 };
3719 
3720 static int __init stedma40_init(void)
3721 {
3722 	return platform_driver_probe(&d40_driver, d40_probe);
3723 }
3724 subsys_initcall(stedma40_init);
3725