1 /* 2 * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 and 6 * only version 2 as published by the Free Software Foundation. 7 * 8 * This program is distributed in the hope that it will be useful, 9 * but WITHOUT ANY WARRANTY; without even the implied warranty of 10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 * 13 */ 14 /* 15 * QCOM BAM DMA engine driver 16 * 17 * QCOM BAM DMA blocks are distributed amongst a number of the on-chip 18 * peripherals on the MSM 8x74. The configuration of the channels are dependent 19 * on the way they are hard wired to that specific peripheral. The peripheral 20 * device tree entries specify the configuration of each channel. 21 * 22 * The DMA controller requires the use of external memory for storage of the 23 * hardware descriptors for each channel. The descriptor FIFO is accessed as a 24 * circular buffer and operations are managed according to the offset within the 25 * FIFO. After pipe/channel reset, all of the pipe registers and internal state 26 * are back to defaults. 27 * 28 * During DMA operations, we write descriptors to the FIFO, being careful to 29 * handle wrapping and then write the last FIFO offset to that channel's 30 * P_EVNT_REG register to kick off the transaction. The P_SW_OFSTS register 31 * indicates the current FIFO offset that is being processed, so there is some 32 * indication of where the hardware is currently working. 33 */ 34 35 #include <linux/kernel.h> 36 #include <linux/io.h> 37 #include <linux/init.h> 38 #include <linux/slab.h> 39 #include <linux/module.h> 40 #include <linux/interrupt.h> 41 #include <linux/dma-mapping.h> 42 #include <linux/scatterlist.h> 43 #include <linux/device.h> 44 #include <linux/platform_device.h> 45 #include <linux/of.h> 46 #include <linux/of_address.h> 47 #include <linux/of_irq.h> 48 #include <linux/of_dma.h> 49 #include <linux/circ_buf.h> 50 #include <linux/clk.h> 51 #include <linux/dmaengine.h> 52 #include <linux/pm_runtime.h> 53 54 #include "../dmaengine.h" 55 #include "../virt-dma.h" 56 57 struct bam_desc_hw { 58 __le32 addr; /* Buffer physical address */ 59 __le16 size; /* Buffer size in bytes */ 60 __le16 flags; 61 }; 62 63 #define BAM_DMA_AUTOSUSPEND_DELAY 100 64 65 #define DESC_FLAG_INT BIT(15) 66 #define DESC_FLAG_EOT BIT(14) 67 #define DESC_FLAG_EOB BIT(13) 68 #define DESC_FLAG_NWD BIT(12) 69 #define DESC_FLAG_CMD BIT(11) 70 71 struct bam_async_desc { 72 struct virt_dma_desc vd; 73 74 u32 num_desc; 75 u32 xfer_len; 76 77 /* transaction flags, EOT|EOB|NWD */ 78 u16 flags; 79 80 struct bam_desc_hw *curr_desc; 81 82 /* list node for the desc in the bam_chan list of descriptors */ 83 struct list_head desc_node; 84 enum dma_transfer_direction dir; 85 size_t length; 86 struct bam_desc_hw desc[0]; 87 }; 88 89 enum bam_reg { 90 BAM_CTRL, 91 BAM_REVISION, 92 BAM_NUM_PIPES, 93 BAM_DESC_CNT_TRSHLD, 94 BAM_IRQ_SRCS, 95 BAM_IRQ_SRCS_MSK, 96 BAM_IRQ_SRCS_UNMASKED, 97 BAM_IRQ_STTS, 98 BAM_IRQ_CLR, 99 BAM_IRQ_EN, 100 BAM_CNFG_BITS, 101 BAM_IRQ_SRCS_EE, 102 BAM_IRQ_SRCS_MSK_EE, 103 BAM_P_CTRL, 104 BAM_P_RST, 105 BAM_P_HALT, 106 BAM_P_IRQ_STTS, 107 BAM_P_IRQ_CLR, 108 BAM_P_IRQ_EN, 109 BAM_P_EVNT_DEST_ADDR, 110 BAM_P_EVNT_REG, 111 BAM_P_SW_OFSTS, 112 BAM_P_DATA_FIFO_ADDR, 113 BAM_P_DESC_FIFO_ADDR, 114 BAM_P_EVNT_GEN_TRSHLD, 115 BAM_P_FIFO_SIZES, 116 }; 117 118 struct reg_offset_data { 119 u32 base_offset; 120 unsigned int pipe_mult, evnt_mult, ee_mult; 121 }; 122 123 static const struct reg_offset_data bam_v1_3_reg_info[] = { 124 [BAM_CTRL] = { 0x0F80, 0x00, 0x00, 0x00 }, 125 [BAM_REVISION] = { 0x0F84, 0x00, 0x00, 0x00 }, 126 [BAM_NUM_PIPES] = { 0x0FBC, 0x00, 0x00, 0x00 }, 127 [BAM_DESC_CNT_TRSHLD] = { 0x0F88, 0x00, 0x00, 0x00 }, 128 [BAM_IRQ_SRCS] = { 0x0F8C, 0x00, 0x00, 0x00 }, 129 [BAM_IRQ_SRCS_MSK] = { 0x0F90, 0x00, 0x00, 0x00 }, 130 [BAM_IRQ_SRCS_UNMASKED] = { 0x0FB0, 0x00, 0x00, 0x00 }, 131 [BAM_IRQ_STTS] = { 0x0F94, 0x00, 0x00, 0x00 }, 132 [BAM_IRQ_CLR] = { 0x0F98, 0x00, 0x00, 0x00 }, 133 [BAM_IRQ_EN] = { 0x0F9C, 0x00, 0x00, 0x00 }, 134 [BAM_CNFG_BITS] = { 0x0FFC, 0x00, 0x00, 0x00 }, 135 [BAM_IRQ_SRCS_EE] = { 0x1800, 0x00, 0x00, 0x80 }, 136 [BAM_IRQ_SRCS_MSK_EE] = { 0x1804, 0x00, 0x00, 0x80 }, 137 [BAM_P_CTRL] = { 0x0000, 0x80, 0x00, 0x00 }, 138 [BAM_P_RST] = { 0x0004, 0x80, 0x00, 0x00 }, 139 [BAM_P_HALT] = { 0x0008, 0x80, 0x00, 0x00 }, 140 [BAM_P_IRQ_STTS] = { 0x0010, 0x80, 0x00, 0x00 }, 141 [BAM_P_IRQ_CLR] = { 0x0014, 0x80, 0x00, 0x00 }, 142 [BAM_P_IRQ_EN] = { 0x0018, 0x80, 0x00, 0x00 }, 143 [BAM_P_EVNT_DEST_ADDR] = { 0x102C, 0x00, 0x40, 0x00 }, 144 [BAM_P_EVNT_REG] = { 0x1018, 0x00, 0x40, 0x00 }, 145 [BAM_P_SW_OFSTS] = { 0x1000, 0x00, 0x40, 0x00 }, 146 [BAM_P_DATA_FIFO_ADDR] = { 0x1024, 0x00, 0x40, 0x00 }, 147 [BAM_P_DESC_FIFO_ADDR] = { 0x101C, 0x00, 0x40, 0x00 }, 148 [BAM_P_EVNT_GEN_TRSHLD] = { 0x1028, 0x00, 0x40, 0x00 }, 149 [BAM_P_FIFO_SIZES] = { 0x1020, 0x00, 0x40, 0x00 }, 150 }; 151 152 static const struct reg_offset_data bam_v1_4_reg_info[] = { 153 [BAM_CTRL] = { 0x0000, 0x00, 0x00, 0x00 }, 154 [BAM_REVISION] = { 0x0004, 0x00, 0x00, 0x00 }, 155 [BAM_NUM_PIPES] = { 0x003C, 0x00, 0x00, 0x00 }, 156 [BAM_DESC_CNT_TRSHLD] = { 0x0008, 0x00, 0x00, 0x00 }, 157 [BAM_IRQ_SRCS] = { 0x000C, 0x00, 0x00, 0x00 }, 158 [BAM_IRQ_SRCS_MSK] = { 0x0010, 0x00, 0x00, 0x00 }, 159 [BAM_IRQ_SRCS_UNMASKED] = { 0x0030, 0x00, 0x00, 0x00 }, 160 [BAM_IRQ_STTS] = { 0x0014, 0x00, 0x00, 0x00 }, 161 [BAM_IRQ_CLR] = { 0x0018, 0x00, 0x00, 0x00 }, 162 [BAM_IRQ_EN] = { 0x001C, 0x00, 0x00, 0x00 }, 163 [BAM_CNFG_BITS] = { 0x007C, 0x00, 0x00, 0x00 }, 164 [BAM_IRQ_SRCS_EE] = { 0x0800, 0x00, 0x00, 0x80 }, 165 [BAM_IRQ_SRCS_MSK_EE] = { 0x0804, 0x00, 0x00, 0x80 }, 166 [BAM_P_CTRL] = { 0x1000, 0x1000, 0x00, 0x00 }, 167 [BAM_P_RST] = { 0x1004, 0x1000, 0x00, 0x00 }, 168 [BAM_P_HALT] = { 0x1008, 0x1000, 0x00, 0x00 }, 169 [BAM_P_IRQ_STTS] = { 0x1010, 0x1000, 0x00, 0x00 }, 170 [BAM_P_IRQ_CLR] = { 0x1014, 0x1000, 0x00, 0x00 }, 171 [BAM_P_IRQ_EN] = { 0x1018, 0x1000, 0x00, 0x00 }, 172 [BAM_P_EVNT_DEST_ADDR] = { 0x182C, 0x00, 0x1000, 0x00 }, 173 [BAM_P_EVNT_REG] = { 0x1818, 0x00, 0x1000, 0x00 }, 174 [BAM_P_SW_OFSTS] = { 0x1800, 0x00, 0x1000, 0x00 }, 175 [BAM_P_DATA_FIFO_ADDR] = { 0x1824, 0x00, 0x1000, 0x00 }, 176 [BAM_P_DESC_FIFO_ADDR] = { 0x181C, 0x00, 0x1000, 0x00 }, 177 [BAM_P_EVNT_GEN_TRSHLD] = { 0x1828, 0x00, 0x1000, 0x00 }, 178 [BAM_P_FIFO_SIZES] = { 0x1820, 0x00, 0x1000, 0x00 }, 179 }; 180 181 static const struct reg_offset_data bam_v1_7_reg_info[] = { 182 [BAM_CTRL] = { 0x00000, 0x00, 0x00, 0x00 }, 183 [BAM_REVISION] = { 0x01000, 0x00, 0x00, 0x00 }, 184 [BAM_NUM_PIPES] = { 0x01008, 0x00, 0x00, 0x00 }, 185 [BAM_DESC_CNT_TRSHLD] = { 0x00008, 0x00, 0x00, 0x00 }, 186 [BAM_IRQ_SRCS] = { 0x03010, 0x00, 0x00, 0x00 }, 187 [BAM_IRQ_SRCS_MSK] = { 0x03014, 0x00, 0x00, 0x00 }, 188 [BAM_IRQ_SRCS_UNMASKED] = { 0x03018, 0x00, 0x00, 0x00 }, 189 [BAM_IRQ_STTS] = { 0x00014, 0x00, 0x00, 0x00 }, 190 [BAM_IRQ_CLR] = { 0x00018, 0x00, 0x00, 0x00 }, 191 [BAM_IRQ_EN] = { 0x0001C, 0x00, 0x00, 0x00 }, 192 [BAM_CNFG_BITS] = { 0x0007C, 0x00, 0x00, 0x00 }, 193 [BAM_IRQ_SRCS_EE] = { 0x03000, 0x00, 0x00, 0x1000 }, 194 [BAM_IRQ_SRCS_MSK_EE] = { 0x03004, 0x00, 0x00, 0x1000 }, 195 [BAM_P_CTRL] = { 0x13000, 0x1000, 0x00, 0x00 }, 196 [BAM_P_RST] = { 0x13004, 0x1000, 0x00, 0x00 }, 197 [BAM_P_HALT] = { 0x13008, 0x1000, 0x00, 0x00 }, 198 [BAM_P_IRQ_STTS] = { 0x13010, 0x1000, 0x00, 0x00 }, 199 [BAM_P_IRQ_CLR] = { 0x13014, 0x1000, 0x00, 0x00 }, 200 [BAM_P_IRQ_EN] = { 0x13018, 0x1000, 0x00, 0x00 }, 201 [BAM_P_EVNT_DEST_ADDR] = { 0x1382C, 0x00, 0x1000, 0x00 }, 202 [BAM_P_EVNT_REG] = { 0x13818, 0x00, 0x1000, 0x00 }, 203 [BAM_P_SW_OFSTS] = { 0x13800, 0x00, 0x1000, 0x00 }, 204 [BAM_P_DATA_FIFO_ADDR] = { 0x13824, 0x00, 0x1000, 0x00 }, 205 [BAM_P_DESC_FIFO_ADDR] = { 0x1381C, 0x00, 0x1000, 0x00 }, 206 [BAM_P_EVNT_GEN_TRSHLD] = { 0x13828, 0x00, 0x1000, 0x00 }, 207 [BAM_P_FIFO_SIZES] = { 0x13820, 0x00, 0x1000, 0x00 }, 208 }; 209 210 /* BAM CTRL */ 211 #define BAM_SW_RST BIT(0) 212 #define BAM_EN BIT(1) 213 #define BAM_EN_ACCUM BIT(4) 214 #define BAM_TESTBUS_SEL_SHIFT 5 215 #define BAM_TESTBUS_SEL_MASK 0x3F 216 #define BAM_DESC_CACHE_SEL_SHIFT 13 217 #define BAM_DESC_CACHE_SEL_MASK 0x3 218 #define BAM_CACHED_DESC_STORE BIT(15) 219 #define IBC_DISABLE BIT(16) 220 221 /* BAM REVISION */ 222 #define REVISION_SHIFT 0 223 #define REVISION_MASK 0xFF 224 #define NUM_EES_SHIFT 8 225 #define NUM_EES_MASK 0xF 226 #define CE_BUFFER_SIZE BIT(13) 227 #define AXI_ACTIVE BIT(14) 228 #define USE_VMIDMT BIT(15) 229 #define SECURED BIT(16) 230 #define BAM_HAS_NO_BYPASS BIT(17) 231 #define HIGH_FREQUENCY_BAM BIT(18) 232 #define INACTIV_TMRS_EXST BIT(19) 233 #define NUM_INACTIV_TMRS BIT(20) 234 #define DESC_CACHE_DEPTH_SHIFT 21 235 #define DESC_CACHE_DEPTH_1 (0 << DESC_CACHE_DEPTH_SHIFT) 236 #define DESC_CACHE_DEPTH_2 (1 << DESC_CACHE_DEPTH_SHIFT) 237 #define DESC_CACHE_DEPTH_3 (2 << DESC_CACHE_DEPTH_SHIFT) 238 #define DESC_CACHE_DEPTH_4 (3 << DESC_CACHE_DEPTH_SHIFT) 239 #define CMD_DESC_EN BIT(23) 240 #define INACTIV_TMR_BASE_SHIFT 24 241 #define INACTIV_TMR_BASE_MASK 0xFF 242 243 /* BAM NUM PIPES */ 244 #define BAM_NUM_PIPES_SHIFT 0 245 #define BAM_NUM_PIPES_MASK 0xFF 246 #define PERIPH_NON_PIPE_GRP_SHIFT 16 247 #define PERIPH_NON_PIP_GRP_MASK 0xFF 248 #define BAM_NON_PIPE_GRP_SHIFT 24 249 #define BAM_NON_PIPE_GRP_MASK 0xFF 250 251 /* BAM CNFG BITS */ 252 #define BAM_PIPE_CNFG BIT(2) 253 #define BAM_FULL_PIPE BIT(11) 254 #define BAM_NO_EXT_P_RST BIT(12) 255 #define BAM_IBC_DISABLE BIT(13) 256 #define BAM_SB_CLK_REQ BIT(14) 257 #define BAM_PSM_CSW_REQ BIT(15) 258 #define BAM_PSM_P_RES BIT(16) 259 #define BAM_AU_P_RES BIT(17) 260 #define BAM_SI_P_RES BIT(18) 261 #define BAM_WB_P_RES BIT(19) 262 #define BAM_WB_BLK_CSW BIT(20) 263 #define BAM_WB_CSW_ACK_IDL BIT(21) 264 #define BAM_WB_RETR_SVPNT BIT(22) 265 #define BAM_WB_DSC_AVL_P_RST BIT(23) 266 #define BAM_REG_P_EN BIT(24) 267 #define BAM_PSM_P_HD_DATA BIT(25) 268 #define BAM_AU_ACCUMED BIT(26) 269 #define BAM_CMD_ENABLE BIT(27) 270 271 #define BAM_CNFG_BITS_DEFAULT (BAM_PIPE_CNFG | \ 272 BAM_NO_EXT_P_RST | \ 273 BAM_IBC_DISABLE | \ 274 BAM_SB_CLK_REQ | \ 275 BAM_PSM_CSW_REQ | \ 276 BAM_PSM_P_RES | \ 277 BAM_AU_P_RES | \ 278 BAM_SI_P_RES | \ 279 BAM_WB_P_RES | \ 280 BAM_WB_BLK_CSW | \ 281 BAM_WB_CSW_ACK_IDL | \ 282 BAM_WB_RETR_SVPNT | \ 283 BAM_WB_DSC_AVL_P_RST | \ 284 BAM_REG_P_EN | \ 285 BAM_PSM_P_HD_DATA | \ 286 BAM_AU_ACCUMED | \ 287 BAM_CMD_ENABLE) 288 289 /* PIPE CTRL */ 290 #define P_EN BIT(1) 291 #define P_DIRECTION BIT(3) 292 #define P_SYS_STRM BIT(4) 293 #define P_SYS_MODE BIT(5) 294 #define P_AUTO_EOB BIT(6) 295 #define P_AUTO_EOB_SEL_SHIFT 7 296 #define P_AUTO_EOB_SEL_512 (0 << P_AUTO_EOB_SEL_SHIFT) 297 #define P_AUTO_EOB_SEL_256 (1 << P_AUTO_EOB_SEL_SHIFT) 298 #define P_AUTO_EOB_SEL_128 (2 << P_AUTO_EOB_SEL_SHIFT) 299 #define P_AUTO_EOB_SEL_64 (3 << P_AUTO_EOB_SEL_SHIFT) 300 #define P_PREFETCH_LIMIT_SHIFT 9 301 #define P_PREFETCH_LIMIT_32 (0 << P_PREFETCH_LIMIT_SHIFT) 302 #define P_PREFETCH_LIMIT_16 (1 << P_PREFETCH_LIMIT_SHIFT) 303 #define P_PREFETCH_LIMIT_4 (2 << P_PREFETCH_LIMIT_SHIFT) 304 #define P_WRITE_NWD BIT(11) 305 #define P_LOCK_GROUP_SHIFT 16 306 #define P_LOCK_GROUP_MASK 0x1F 307 308 /* BAM_DESC_CNT_TRSHLD */ 309 #define CNT_TRSHLD 0xffff 310 #define DEFAULT_CNT_THRSHLD 0x4 311 312 /* BAM_IRQ_SRCS */ 313 #define BAM_IRQ BIT(31) 314 #define P_IRQ 0x7fffffff 315 316 /* BAM_IRQ_SRCS_MSK */ 317 #define BAM_IRQ_MSK BAM_IRQ 318 #define P_IRQ_MSK P_IRQ 319 320 /* BAM_IRQ_STTS */ 321 #define BAM_TIMER_IRQ BIT(4) 322 #define BAM_EMPTY_IRQ BIT(3) 323 #define BAM_ERROR_IRQ BIT(2) 324 #define BAM_HRESP_ERR_IRQ BIT(1) 325 326 /* BAM_IRQ_CLR */ 327 #define BAM_TIMER_CLR BIT(4) 328 #define BAM_EMPTY_CLR BIT(3) 329 #define BAM_ERROR_CLR BIT(2) 330 #define BAM_HRESP_ERR_CLR BIT(1) 331 332 /* BAM_IRQ_EN */ 333 #define BAM_TIMER_EN BIT(4) 334 #define BAM_EMPTY_EN BIT(3) 335 #define BAM_ERROR_EN BIT(2) 336 #define BAM_HRESP_ERR_EN BIT(1) 337 338 /* BAM_P_IRQ_EN */ 339 #define P_PRCSD_DESC_EN BIT(0) 340 #define P_TIMER_EN BIT(1) 341 #define P_WAKE_EN BIT(2) 342 #define P_OUT_OF_DESC_EN BIT(3) 343 #define P_ERR_EN BIT(4) 344 #define P_TRNSFR_END_EN BIT(5) 345 #define P_DEFAULT_IRQS_EN (P_PRCSD_DESC_EN | P_ERR_EN | P_TRNSFR_END_EN) 346 347 /* BAM_P_SW_OFSTS */ 348 #define P_SW_OFSTS_MASK 0xffff 349 350 #define BAM_DESC_FIFO_SIZE SZ_32K 351 #define MAX_DESCRIPTORS (BAM_DESC_FIFO_SIZE / sizeof(struct bam_desc_hw) - 1) 352 #define BAM_FIFO_SIZE (SZ_32K - 8) 353 #define IS_BUSY(chan) (CIRC_SPACE(bchan->tail, bchan->head,\ 354 MAX_DESCRIPTORS + 1) == 0) 355 356 struct bam_chan { 357 struct virt_dma_chan vc; 358 359 struct bam_device *bdev; 360 361 /* configuration from device tree */ 362 u32 id; 363 364 /* runtime configuration */ 365 struct dma_slave_config slave; 366 367 /* fifo storage */ 368 struct bam_desc_hw *fifo_virt; 369 dma_addr_t fifo_phys; 370 371 /* fifo markers */ 372 unsigned short head; /* start of active descriptor entries */ 373 unsigned short tail; /* end of active descriptor entries */ 374 375 unsigned int initialized; /* is the channel hw initialized? */ 376 unsigned int paused; /* is the channel paused? */ 377 unsigned int reconfigure; /* new slave config? */ 378 /* list of descriptors currently processed */ 379 struct list_head desc_list; 380 381 struct list_head node; 382 }; 383 384 static inline struct bam_chan *to_bam_chan(struct dma_chan *common) 385 { 386 return container_of(common, struct bam_chan, vc.chan); 387 } 388 389 struct bam_device { 390 void __iomem *regs; 391 struct device *dev; 392 struct dma_device common; 393 struct device_dma_parameters dma_parms; 394 struct bam_chan *channels; 395 u32 num_channels; 396 u32 num_ees; 397 398 /* execution environment ID, from DT */ 399 u32 ee; 400 bool controlled_remotely; 401 402 const struct reg_offset_data *layout; 403 404 struct clk *bamclk; 405 int irq; 406 407 /* dma start transaction tasklet */ 408 struct tasklet_struct task; 409 }; 410 411 /** 412 * bam_addr - returns BAM register address 413 * @bdev: bam device 414 * @pipe: pipe instance (ignored when register doesn't have multiple instances) 415 * @reg: register enum 416 */ 417 static inline void __iomem *bam_addr(struct bam_device *bdev, u32 pipe, 418 enum bam_reg reg) 419 { 420 const struct reg_offset_data r = bdev->layout[reg]; 421 422 return bdev->regs + r.base_offset + 423 r.pipe_mult * pipe + 424 r.evnt_mult * pipe + 425 r.ee_mult * bdev->ee; 426 } 427 428 /** 429 * bam_reset_channel - Reset individual BAM DMA channel 430 * @bchan: bam channel 431 * 432 * This function resets a specific BAM channel 433 */ 434 static void bam_reset_channel(struct bam_chan *bchan) 435 { 436 struct bam_device *bdev = bchan->bdev; 437 438 lockdep_assert_held(&bchan->vc.lock); 439 440 /* reset channel */ 441 writel_relaxed(1, bam_addr(bdev, bchan->id, BAM_P_RST)); 442 writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_RST)); 443 444 /* don't allow cpu to reorder BAM register accesses done after this */ 445 wmb(); 446 447 /* make sure hw is initialized when channel is used the first time */ 448 bchan->initialized = 0; 449 } 450 451 /** 452 * bam_chan_init_hw - Initialize channel hardware 453 * @bchan: bam channel 454 * @dir: DMA transfer direction 455 * 456 * This function resets and initializes the BAM channel 457 */ 458 static void bam_chan_init_hw(struct bam_chan *bchan, 459 enum dma_transfer_direction dir) 460 { 461 struct bam_device *bdev = bchan->bdev; 462 u32 val; 463 464 /* Reset the channel to clear internal state of the FIFO */ 465 bam_reset_channel(bchan); 466 467 /* 468 * write out 8 byte aligned address. We have enough space for this 469 * because we allocated 1 more descriptor (8 bytes) than we can use 470 */ 471 writel_relaxed(ALIGN(bchan->fifo_phys, sizeof(struct bam_desc_hw)), 472 bam_addr(bdev, bchan->id, BAM_P_DESC_FIFO_ADDR)); 473 writel_relaxed(BAM_FIFO_SIZE, 474 bam_addr(bdev, bchan->id, BAM_P_FIFO_SIZES)); 475 476 /* enable the per pipe interrupts, enable EOT, ERR, and INT irqs */ 477 writel_relaxed(P_DEFAULT_IRQS_EN, 478 bam_addr(bdev, bchan->id, BAM_P_IRQ_EN)); 479 480 /* unmask the specific pipe and EE combo */ 481 val = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); 482 val |= BIT(bchan->id); 483 writel_relaxed(val, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); 484 485 /* don't allow cpu to reorder the channel enable done below */ 486 wmb(); 487 488 /* set fixed direction and mode, then enable channel */ 489 val = P_EN | P_SYS_MODE; 490 if (dir == DMA_DEV_TO_MEM) 491 val |= P_DIRECTION; 492 493 writel_relaxed(val, bam_addr(bdev, bchan->id, BAM_P_CTRL)); 494 495 bchan->initialized = 1; 496 497 /* init FIFO pointers */ 498 bchan->head = 0; 499 bchan->tail = 0; 500 } 501 502 /** 503 * bam_alloc_chan - Allocate channel resources for DMA channel. 504 * @chan: specified channel 505 * 506 * This function allocates the FIFO descriptor memory 507 */ 508 static int bam_alloc_chan(struct dma_chan *chan) 509 { 510 struct bam_chan *bchan = to_bam_chan(chan); 511 struct bam_device *bdev = bchan->bdev; 512 513 if (bchan->fifo_virt) 514 return 0; 515 516 /* allocate FIFO descriptor space, but only if necessary */ 517 bchan->fifo_virt = dma_alloc_wc(bdev->dev, BAM_DESC_FIFO_SIZE, 518 &bchan->fifo_phys, GFP_KERNEL); 519 520 if (!bchan->fifo_virt) { 521 dev_err(bdev->dev, "Failed to allocate desc fifo\n"); 522 return -ENOMEM; 523 } 524 525 return 0; 526 } 527 528 static int bam_pm_runtime_get_sync(struct device *dev) 529 { 530 if (pm_runtime_enabled(dev)) 531 return pm_runtime_get_sync(dev); 532 533 return 0; 534 } 535 536 /** 537 * bam_free_chan - Frees dma resources associated with specific channel 538 * @chan: specified channel 539 * 540 * Free the allocated fifo descriptor memory and channel resources 541 * 542 */ 543 static void bam_free_chan(struct dma_chan *chan) 544 { 545 struct bam_chan *bchan = to_bam_chan(chan); 546 struct bam_device *bdev = bchan->bdev; 547 u32 val; 548 unsigned long flags; 549 int ret; 550 551 ret = bam_pm_runtime_get_sync(bdev->dev); 552 if (ret < 0) 553 return; 554 555 vchan_free_chan_resources(to_virt_chan(chan)); 556 557 if (!list_empty(&bchan->desc_list)) { 558 dev_err(bchan->bdev->dev, "Cannot free busy channel\n"); 559 goto err; 560 } 561 562 spin_lock_irqsave(&bchan->vc.lock, flags); 563 bam_reset_channel(bchan); 564 spin_unlock_irqrestore(&bchan->vc.lock, flags); 565 566 dma_free_wc(bdev->dev, BAM_DESC_FIFO_SIZE, bchan->fifo_virt, 567 bchan->fifo_phys); 568 bchan->fifo_virt = NULL; 569 570 /* mask irq for pipe/channel */ 571 val = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); 572 val &= ~BIT(bchan->id); 573 writel_relaxed(val, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); 574 575 /* disable irq */ 576 writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_IRQ_EN)); 577 578 err: 579 pm_runtime_mark_last_busy(bdev->dev); 580 pm_runtime_put_autosuspend(bdev->dev); 581 } 582 583 /** 584 * bam_slave_config - set slave configuration for channel 585 * @chan: dma channel 586 * @cfg: slave configuration 587 * 588 * Sets slave configuration for channel 589 * 590 */ 591 static int bam_slave_config(struct dma_chan *chan, 592 struct dma_slave_config *cfg) 593 { 594 struct bam_chan *bchan = to_bam_chan(chan); 595 unsigned long flag; 596 597 spin_lock_irqsave(&bchan->vc.lock, flag); 598 memcpy(&bchan->slave, cfg, sizeof(*cfg)); 599 bchan->reconfigure = 1; 600 spin_unlock_irqrestore(&bchan->vc.lock, flag); 601 602 return 0; 603 } 604 605 /** 606 * bam_prep_slave_sg - Prep slave sg transaction 607 * 608 * @chan: dma channel 609 * @sgl: scatter gather list 610 * @sg_len: length of sg 611 * @direction: DMA transfer direction 612 * @flags: DMA flags 613 * @context: transfer context (unused) 614 */ 615 static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan, 616 struct scatterlist *sgl, unsigned int sg_len, 617 enum dma_transfer_direction direction, unsigned long flags, 618 void *context) 619 { 620 struct bam_chan *bchan = to_bam_chan(chan); 621 struct bam_device *bdev = bchan->bdev; 622 struct bam_async_desc *async_desc; 623 struct scatterlist *sg; 624 u32 i; 625 struct bam_desc_hw *desc; 626 unsigned int num_alloc = 0; 627 628 629 if (!is_slave_direction(direction)) { 630 dev_err(bdev->dev, "invalid dma direction\n"); 631 return NULL; 632 } 633 634 /* calculate number of required entries */ 635 for_each_sg(sgl, sg, sg_len, i) 636 num_alloc += DIV_ROUND_UP(sg_dma_len(sg), BAM_FIFO_SIZE); 637 638 /* allocate enough room to accomodate the number of entries */ 639 async_desc = kzalloc(sizeof(*async_desc) + 640 (num_alloc * sizeof(struct bam_desc_hw)), GFP_NOWAIT); 641 642 if (!async_desc) 643 goto err_out; 644 645 if (flags & DMA_PREP_FENCE) 646 async_desc->flags |= DESC_FLAG_NWD; 647 648 if (flags & DMA_PREP_INTERRUPT) 649 async_desc->flags |= DESC_FLAG_EOT; 650 651 async_desc->num_desc = num_alloc; 652 async_desc->curr_desc = async_desc->desc; 653 async_desc->dir = direction; 654 655 /* fill in temporary descriptors */ 656 desc = async_desc->desc; 657 for_each_sg(sgl, sg, sg_len, i) { 658 unsigned int remainder = sg_dma_len(sg); 659 unsigned int curr_offset = 0; 660 661 do { 662 if (flags & DMA_PREP_CMD) 663 desc->flags |= cpu_to_le16(DESC_FLAG_CMD); 664 665 desc->addr = cpu_to_le32(sg_dma_address(sg) + 666 curr_offset); 667 668 if (remainder > BAM_FIFO_SIZE) { 669 desc->size = cpu_to_le16(BAM_FIFO_SIZE); 670 remainder -= BAM_FIFO_SIZE; 671 curr_offset += BAM_FIFO_SIZE; 672 } else { 673 desc->size = cpu_to_le16(remainder); 674 remainder = 0; 675 } 676 677 async_desc->length += le16_to_cpu(desc->size); 678 desc++; 679 } while (remainder > 0); 680 } 681 682 return vchan_tx_prep(&bchan->vc, &async_desc->vd, flags); 683 684 err_out: 685 kfree(async_desc); 686 return NULL; 687 } 688 689 /** 690 * bam_dma_terminate_all - terminate all transactions on a channel 691 * @chan: bam dma channel 692 * 693 * Dequeues and frees all transactions 694 * No callbacks are done 695 * 696 */ 697 static int bam_dma_terminate_all(struct dma_chan *chan) 698 { 699 struct bam_chan *bchan = to_bam_chan(chan); 700 struct bam_async_desc *async_desc, *tmp; 701 unsigned long flag; 702 LIST_HEAD(head); 703 704 /* remove all transactions, including active transaction */ 705 spin_lock_irqsave(&bchan->vc.lock, flag); 706 list_for_each_entry_safe(async_desc, tmp, 707 &bchan->desc_list, desc_node) { 708 list_add(&async_desc->vd.node, &bchan->vc.desc_issued); 709 list_del(&async_desc->desc_node); 710 } 711 712 vchan_get_all_descriptors(&bchan->vc, &head); 713 spin_unlock_irqrestore(&bchan->vc.lock, flag); 714 715 vchan_dma_desc_free_list(&bchan->vc, &head); 716 717 return 0; 718 } 719 720 /** 721 * bam_pause - Pause DMA channel 722 * @chan: dma channel 723 * 724 */ 725 static int bam_pause(struct dma_chan *chan) 726 { 727 struct bam_chan *bchan = to_bam_chan(chan); 728 struct bam_device *bdev = bchan->bdev; 729 unsigned long flag; 730 int ret; 731 732 ret = bam_pm_runtime_get_sync(bdev->dev); 733 if (ret < 0) 734 return ret; 735 736 spin_lock_irqsave(&bchan->vc.lock, flag); 737 writel_relaxed(1, bam_addr(bdev, bchan->id, BAM_P_HALT)); 738 bchan->paused = 1; 739 spin_unlock_irqrestore(&bchan->vc.lock, flag); 740 pm_runtime_mark_last_busy(bdev->dev); 741 pm_runtime_put_autosuspend(bdev->dev); 742 743 return 0; 744 } 745 746 /** 747 * bam_resume - Resume DMA channel operations 748 * @chan: dma channel 749 * 750 */ 751 static int bam_resume(struct dma_chan *chan) 752 { 753 struct bam_chan *bchan = to_bam_chan(chan); 754 struct bam_device *bdev = bchan->bdev; 755 unsigned long flag; 756 int ret; 757 758 ret = bam_pm_runtime_get_sync(bdev->dev); 759 if (ret < 0) 760 return ret; 761 762 spin_lock_irqsave(&bchan->vc.lock, flag); 763 writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_HALT)); 764 bchan->paused = 0; 765 spin_unlock_irqrestore(&bchan->vc.lock, flag); 766 pm_runtime_mark_last_busy(bdev->dev); 767 pm_runtime_put_autosuspend(bdev->dev); 768 769 return 0; 770 } 771 772 /** 773 * process_channel_irqs - processes the channel interrupts 774 * @bdev: bam controller 775 * 776 * This function processes the channel interrupts 777 * 778 */ 779 static u32 process_channel_irqs(struct bam_device *bdev) 780 { 781 u32 i, srcs, pipe_stts, offset, avail; 782 unsigned long flags; 783 struct bam_async_desc *async_desc, *tmp; 784 785 srcs = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_EE)); 786 787 /* return early if no pipe/channel interrupts are present */ 788 if (!(srcs & P_IRQ)) 789 return srcs; 790 791 for (i = 0; i < bdev->num_channels; i++) { 792 struct bam_chan *bchan = &bdev->channels[i]; 793 794 if (!(srcs & BIT(i))) 795 continue; 796 797 /* clear pipe irq */ 798 pipe_stts = readl_relaxed(bam_addr(bdev, i, BAM_P_IRQ_STTS)); 799 800 writel_relaxed(pipe_stts, bam_addr(bdev, i, BAM_P_IRQ_CLR)); 801 802 spin_lock_irqsave(&bchan->vc.lock, flags); 803 804 offset = readl_relaxed(bam_addr(bdev, i, BAM_P_SW_OFSTS)) & 805 P_SW_OFSTS_MASK; 806 offset /= sizeof(struct bam_desc_hw); 807 808 /* Number of bytes available to read */ 809 avail = CIRC_CNT(offset, bchan->head, MAX_DESCRIPTORS + 1); 810 811 list_for_each_entry_safe(async_desc, tmp, 812 &bchan->desc_list, desc_node) { 813 /* Not enough data to read */ 814 if (avail < async_desc->xfer_len) 815 break; 816 817 /* manage FIFO */ 818 bchan->head += async_desc->xfer_len; 819 bchan->head %= MAX_DESCRIPTORS; 820 821 async_desc->num_desc -= async_desc->xfer_len; 822 async_desc->curr_desc += async_desc->xfer_len; 823 avail -= async_desc->xfer_len; 824 825 /* 826 * if complete, process cookie. Otherwise 827 * push back to front of desc_issued so that 828 * it gets restarted by the tasklet 829 */ 830 if (!async_desc->num_desc) { 831 vchan_cookie_complete(&async_desc->vd); 832 } else { 833 list_add(&async_desc->vd.node, 834 &bchan->vc.desc_issued); 835 } 836 list_del(&async_desc->desc_node); 837 } 838 839 spin_unlock_irqrestore(&bchan->vc.lock, flags); 840 } 841 842 return srcs; 843 } 844 845 /** 846 * bam_dma_irq - irq handler for bam controller 847 * @irq: IRQ of interrupt 848 * @data: callback data 849 * 850 * IRQ handler for the bam controller 851 */ 852 static irqreturn_t bam_dma_irq(int irq, void *data) 853 { 854 struct bam_device *bdev = data; 855 u32 clr_mask = 0, srcs = 0; 856 int ret; 857 858 srcs |= process_channel_irqs(bdev); 859 860 /* kick off tasklet to start next dma transfer */ 861 if (srcs & P_IRQ) 862 tasklet_schedule(&bdev->task); 863 864 ret = bam_pm_runtime_get_sync(bdev->dev); 865 if (ret < 0) 866 return ret; 867 868 if (srcs & BAM_IRQ) { 869 clr_mask = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_STTS)); 870 871 /* 872 * don't allow reorder of the various accesses to the BAM 873 * registers 874 */ 875 mb(); 876 877 writel_relaxed(clr_mask, bam_addr(bdev, 0, BAM_IRQ_CLR)); 878 } 879 880 pm_runtime_mark_last_busy(bdev->dev); 881 pm_runtime_put_autosuspend(bdev->dev); 882 883 return IRQ_HANDLED; 884 } 885 886 /** 887 * bam_tx_status - returns status of transaction 888 * @chan: dma channel 889 * @cookie: transaction cookie 890 * @txstate: DMA transaction state 891 * 892 * Return status of dma transaction 893 */ 894 static enum dma_status bam_tx_status(struct dma_chan *chan, dma_cookie_t cookie, 895 struct dma_tx_state *txstate) 896 { 897 struct bam_chan *bchan = to_bam_chan(chan); 898 struct bam_async_desc *async_desc; 899 struct virt_dma_desc *vd; 900 int ret; 901 size_t residue = 0; 902 unsigned int i; 903 unsigned long flags; 904 905 ret = dma_cookie_status(chan, cookie, txstate); 906 if (ret == DMA_COMPLETE) 907 return ret; 908 909 if (!txstate) 910 return bchan->paused ? DMA_PAUSED : ret; 911 912 spin_lock_irqsave(&bchan->vc.lock, flags); 913 vd = vchan_find_desc(&bchan->vc, cookie); 914 if (vd) { 915 residue = container_of(vd, struct bam_async_desc, vd)->length; 916 } else { 917 list_for_each_entry(async_desc, &bchan->desc_list, desc_node) { 918 if (async_desc->vd.tx.cookie != cookie) 919 continue; 920 921 for (i = 0; i < async_desc->num_desc; i++) 922 residue += le16_to_cpu( 923 async_desc->curr_desc[i].size); 924 } 925 } 926 927 spin_unlock_irqrestore(&bchan->vc.lock, flags); 928 929 dma_set_residue(txstate, residue); 930 931 if (ret == DMA_IN_PROGRESS && bchan->paused) 932 ret = DMA_PAUSED; 933 934 return ret; 935 } 936 937 /** 938 * bam_apply_new_config 939 * @bchan: bam dma channel 940 * @dir: DMA direction 941 */ 942 static void bam_apply_new_config(struct bam_chan *bchan, 943 enum dma_transfer_direction dir) 944 { 945 struct bam_device *bdev = bchan->bdev; 946 u32 maxburst; 947 948 if (!bdev->controlled_remotely) { 949 if (dir == DMA_DEV_TO_MEM) 950 maxburst = bchan->slave.src_maxburst; 951 else 952 maxburst = bchan->slave.dst_maxburst; 953 954 writel_relaxed(maxburst, 955 bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD)); 956 } 957 958 bchan->reconfigure = 0; 959 } 960 961 /** 962 * bam_start_dma - start next transaction 963 * @bchan: bam dma channel 964 */ 965 static void bam_start_dma(struct bam_chan *bchan) 966 { 967 struct virt_dma_desc *vd = vchan_next_desc(&bchan->vc); 968 struct bam_device *bdev = bchan->bdev; 969 struct bam_async_desc *async_desc = NULL; 970 struct bam_desc_hw *desc; 971 struct bam_desc_hw *fifo = PTR_ALIGN(bchan->fifo_virt, 972 sizeof(struct bam_desc_hw)); 973 int ret; 974 unsigned int avail; 975 struct dmaengine_desc_callback cb; 976 977 lockdep_assert_held(&bchan->vc.lock); 978 979 if (!vd) 980 return; 981 982 ret = bam_pm_runtime_get_sync(bdev->dev); 983 if (ret < 0) 984 return; 985 986 while (vd && !IS_BUSY(bchan)) { 987 list_del(&vd->node); 988 989 async_desc = container_of(vd, struct bam_async_desc, vd); 990 991 /* on first use, initialize the channel hardware */ 992 if (!bchan->initialized) 993 bam_chan_init_hw(bchan, async_desc->dir); 994 995 /* apply new slave config changes, if necessary */ 996 if (bchan->reconfigure) 997 bam_apply_new_config(bchan, async_desc->dir); 998 999 desc = async_desc->curr_desc; 1000 avail = CIRC_SPACE(bchan->tail, bchan->head, 1001 MAX_DESCRIPTORS + 1); 1002 1003 if (async_desc->num_desc > avail) 1004 async_desc->xfer_len = avail; 1005 else 1006 async_desc->xfer_len = async_desc->num_desc; 1007 1008 /* set any special flags on the last descriptor */ 1009 if (async_desc->num_desc == async_desc->xfer_len) 1010 desc[async_desc->xfer_len - 1].flags |= 1011 cpu_to_le16(async_desc->flags); 1012 1013 vd = vchan_next_desc(&bchan->vc); 1014 1015 dmaengine_desc_get_callback(&async_desc->vd.tx, &cb); 1016 1017 /* 1018 * An interrupt is generated at this desc, if 1019 * - FIFO is FULL. 1020 * - No more descriptors to add. 1021 * - If a callback completion was requested for this DESC, 1022 * In this case, BAM will deliver the completion callback 1023 * for this desc and continue processing the next desc. 1024 */ 1025 if (((avail <= async_desc->xfer_len) || !vd || 1026 dmaengine_desc_callback_valid(&cb)) && 1027 !(async_desc->flags & DESC_FLAG_EOT)) 1028 desc[async_desc->xfer_len - 1].flags |= 1029 cpu_to_le16(DESC_FLAG_INT); 1030 1031 if (bchan->tail + async_desc->xfer_len > MAX_DESCRIPTORS) { 1032 u32 partial = MAX_DESCRIPTORS - bchan->tail; 1033 1034 memcpy(&fifo[bchan->tail], desc, 1035 partial * sizeof(struct bam_desc_hw)); 1036 memcpy(fifo, &desc[partial], 1037 (async_desc->xfer_len - partial) * 1038 sizeof(struct bam_desc_hw)); 1039 } else { 1040 memcpy(&fifo[bchan->tail], desc, 1041 async_desc->xfer_len * 1042 sizeof(struct bam_desc_hw)); 1043 } 1044 1045 bchan->tail += async_desc->xfer_len; 1046 bchan->tail %= MAX_DESCRIPTORS; 1047 list_add_tail(&async_desc->desc_node, &bchan->desc_list); 1048 } 1049 1050 /* ensure descriptor writes and dma start not reordered */ 1051 wmb(); 1052 writel_relaxed(bchan->tail * sizeof(struct bam_desc_hw), 1053 bam_addr(bdev, bchan->id, BAM_P_EVNT_REG)); 1054 1055 pm_runtime_mark_last_busy(bdev->dev); 1056 pm_runtime_put_autosuspend(bdev->dev); 1057 } 1058 1059 /** 1060 * dma_tasklet - DMA IRQ tasklet 1061 * @data: tasklet argument (bam controller structure) 1062 * 1063 * Sets up next DMA operation and then processes all completed transactions 1064 */ 1065 static void dma_tasklet(unsigned long data) 1066 { 1067 struct bam_device *bdev = (struct bam_device *)data; 1068 struct bam_chan *bchan; 1069 unsigned long flags; 1070 unsigned int i; 1071 1072 /* go through the channels and kick off transactions */ 1073 for (i = 0; i < bdev->num_channels; i++) { 1074 bchan = &bdev->channels[i]; 1075 spin_lock_irqsave(&bchan->vc.lock, flags); 1076 1077 if (!list_empty(&bchan->vc.desc_issued) && !IS_BUSY(bchan)) 1078 bam_start_dma(bchan); 1079 spin_unlock_irqrestore(&bchan->vc.lock, flags); 1080 } 1081 1082 } 1083 1084 /** 1085 * bam_issue_pending - starts pending transactions 1086 * @chan: dma channel 1087 * 1088 * Calls tasklet directly which in turn starts any pending transactions 1089 */ 1090 static void bam_issue_pending(struct dma_chan *chan) 1091 { 1092 struct bam_chan *bchan = to_bam_chan(chan); 1093 unsigned long flags; 1094 1095 spin_lock_irqsave(&bchan->vc.lock, flags); 1096 1097 /* if work pending and idle, start a transaction */ 1098 if (vchan_issue_pending(&bchan->vc) && !IS_BUSY(bchan)) 1099 bam_start_dma(bchan); 1100 1101 spin_unlock_irqrestore(&bchan->vc.lock, flags); 1102 } 1103 1104 /** 1105 * bam_dma_free_desc - free descriptor memory 1106 * @vd: virtual descriptor 1107 * 1108 */ 1109 static void bam_dma_free_desc(struct virt_dma_desc *vd) 1110 { 1111 struct bam_async_desc *async_desc = container_of(vd, 1112 struct bam_async_desc, vd); 1113 1114 kfree(async_desc); 1115 } 1116 1117 static struct dma_chan *bam_dma_xlate(struct of_phandle_args *dma_spec, 1118 struct of_dma *of) 1119 { 1120 struct bam_device *bdev = container_of(of->of_dma_data, 1121 struct bam_device, common); 1122 unsigned int request; 1123 1124 if (dma_spec->args_count != 1) 1125 return NULL; 1126 1127 request = dma_spec->args[0]; 1128 if (request >= bdev->num_channels) 1129 return NULL; 1130 1131 return dma_get_slave_channel(&(bdev->channels[request].vc.chan)); 1132 } 1133 1134 /** 1135 * bam_init 1136 * @bdev: bam device 1137 * 1138 * Initialization helper for global bam registers 1139 */ 1140 static int bam_init(struct bam_device *bdev) 1141 { 1142 u32 val; 1143 1144 /* read revision and configuration information */ 1145 if (!bdev->num_ees) { 1146 val = readl_relaxed(bam_addr(bdev, 0, BAM_REVISION)); 1147 bdev->num_ees = (val >> NUM_EES_SHIFT) & NUM_EES_MASK; 1148 } 1149 1150 /* check that configured EE is within range */ 1151 if (bdev->ee >= bdev->num_ees) 1152 return -EINVAL; 1153 1154 if (!bdev->num_channels) { 1155 val = readl_relaxed(bam_addr(bdev, 0, BAM_NUM_PIPES)); 1156 bdev->num_channels = val & BAM_NUM_PIPES_MASK; 1157 } 1158 1159 if (bdev->controlled_remotely) 1160 return 0; 1161 1162 /* s/w reset bam */ 1163 /* after reset all pipes are disabled and idle */ 1164 val = readl_relaxed(bam_addr(bdev, 0, BAM_CTRL)); 1165 val |= BAM_SW_RST; 1166 writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); 1167 val &= ~BAM_SW_RST; 1168 writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); 1169 1170 /* make sure previous stores are visible before enabling BAM */ 1171 wmb(); 1172 1173 /* enable bam */ 1174 val |= BAM_EN; 1175 writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); 1176 1177 /* set descriptor threshhold, start with 4 bytes */ 1178 writel_relaxed(DEFAULT_CNT_THRSHLD, 1179 bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD)); 1180 1181 /* Enable default set of h/w workarounds, ie all except BAM_FULL_PIPE */ 1182 writel_relaxed(BAM_CNFG_BITS_DEFAULT, bam_addr(bdev, 0, BAM_CNFG_BITS)); 1183 1184 /* enable irqs for errors */ 1185 writel_relaxed(BAM_ERROR_EN | BAM_HRESP_ERR_EN, 1186 bam_addr(bdev, 0, BAM_IRQ_EN)); 1187 1188 /* unmask global bam interrupt */ 1189 writel_relaxed(BAM_IRQ_MSK, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); 1190 1191 return 0; 1192 } 1193 1194 static void bam_channel_init(struct bam_device *bdev, struct bam_chan *bchan, 1195 u32 index) 1196 { 1197 bchan->id = index; 1198 bchan->bdev = bdev; 1199 1200 vchan_init(&bchan->vc, &bdev->common); 1201 bchan->vc.desc_free = bam_dma_free_desc; 1202 INIT_LIST_HEAD(&bchan->desc_list); 1203 } 1204 1205 static const struct of_device_id bam_of_match[] = { 1206 { .compatible = "qcom,bam-v1.3.0", .data = &bam_v1_3_reg_info }, 1207 { .compatible = "qcom,bam-v1.4.0", .data = &bam_v1_4_reg_info }, 1208 { .compatible = "qcom,bam-v1.7.0", .data = &bam_v1_7_reg_info }, 1209 {} 1210 }; 1211 1212 MODULE_DEVICE_TABLE(of, bam_of_match); 1213 1214 static int bam_dma_probe(struct platform_device *pdev) 1215 { 1216 struct bam_device *bdev; 1217 const struct of_device_id *match; 1218 struct resource *iores; 1219 int ret, i; 1220 1221 bdev = devm_kzalloc(&pdev->dev, sizeof(*bdev), GFP_KERNEL); 1222 if (!bdev) 1223 return -ENOMEM; 1224 1225 bdev->dev = &pdev->dev; 1226 1227 match = of_match_node(bam_of_match, pdev->dev.of_node); 1228 if (!match) { 1229 dev_err(&pdev->dev, "Unsupported BAM module\n"); 1230 return -ENODEV; 1231 } 1232 1233 bdev->layout = match->data; 1234 1235 iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1236 bdev->regs = devm_ioremap_resource(&pdev->dev, iores); 1237 if (IS_ERR(bdev->regs)) 1238 return PTR_ERR(bdev->regs); 1239 1240 bdev->irq = platform_get_irq(pdev, 0); 1241 if (bdev->irq < 0) 1242 return bdev->irq; 1243 1244 ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &bdev->ee); 1245 if (ret) { 1246 dev_err(bdev->dev, "Execution environment unspecified\n"); 1247 return ret; 1248 } 1249 1250 bdev->controlled_remotely = of_property_read_bool(pdev->dev.of_node, 1251 "qcom,controlled-remotely"); 1252 1253 if (bdev->controlled_remotely) { 1254 ret = of_property_read_u32(pdev->dev.of_node, "num-channels", 1255 &bdev->num_channels); 1256 if (ret) 1257 dev_err(bdev->dev, "num-channels unspecified in dt\n"); 1258 1259 ret = of_property_read_u32(pdev->dev.of_node, "qcom,num-ees", 1260 &bdev->num_ees); 1261 if (ret) 1262 dev_err(bdev->dev, "num-ees unspecified in dt\n"); 1263 } 1264 1265 bdev->bamclk = devm_clk_get(bdev->dev, "bam_clk"); 1266 if (IS_ERR(bdev->bamclk)) { 1267 if (!bdev->controlled_remotely) 1268 return PTR_ERR(bdev->bamclk); 1269 1270 bdev->bamclk = NULL; 1271 } 1272 1273 ret = clk_prepare_enable(bdev->bamclk); 1274 if (ret) { 1275 dev_err(bdev->dev, "failed to prepare/enable clock\n"); 1276 return ret; 1277 } 1278 1279 ret = bam_init(bdev); 1280 if (ret) 1281 goto err_disable_clk; 1282 1283 tasklet_init(&bdev->task, dma_tasklet, (unsigned long)bdev); 1284 1285 bdev->channels = devm_kcalloc(bdev->dev, bdev->num_channels, 1286 sizeof(*bdev->channels), GFP_KERNEL); 1287 1288 if (!bdev->channels) { 1289 ret = -ENOMEM; 1290 goto err_tasklet_kill; 1291 } 1292 1293 /* allocate and initialize channels */ 1294 INIT_LIST_HEAD(&bdev->common.channels); 1295 1296 for (i = 0; i < bdev->num_channels; i++) 1297 bam_channel_init(bdev, &bdev->channels[i], i); 1298 1299 ret = devm_request_irq(bdev->dev, bdev->irq, bam_dma_irq, 1300 IRQF_TRIGGER_HIGH, "bam_dma", bdev); 1301 if (ret) 1302 goto err_bam_channel_exit; 1303 1304 /* set max dma segment size */ 1305 bdev->common.dev = bdev->dev; 1306 bdev->common.dev->dma_parms = &bdev->dma_parms; 1307 ret = dma_set_max_seg_size(bdev->common.dev, BAM_FIFO_SIZE); 1308 if (ret) { 1309 dev_err(bdev->dev, "cannot set maximum segment size\n"); 1310 goto err_bam_channel_exit; 1311 } 1312 1313 platform_set_drvdata(pdev, bdev); 1314 1315 /* set capabilities */ 1316 dma_cap_zero(bdev->common.cap_mask); 1317 dma_cap_set(DMA_SLAVE, bdev->common.cap_mask); 1318 1319 /* initialize dmaengine apis */ 1320 bdev->common.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); 1321 bdev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT; 1322 bdev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; 1323 bdev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; 1324 bdev->common.device_alloc_chan_resources = bam_alloc_chan; 1325 bdev->common.device_free_chan_resources = bam_free_chan; 1326 bdev->common.device_prep_slave_sg = bam_prep_slave_sg; 1327 bdev->common.device_config = bam_slave_config; 1328 bdev->common.device_pause = bam_pause; 1329 bdev->common.device_resume = bam_resume; 1330 bdev->common.device_terminate_all = bam_dma_terminate_all; 1331 bdev->common.device_issue_pending = bam_issue_pending; 1332 bdev->common.device_tx_status = bam_tx_status; 1333 bdev->common.dev = bdev->dev; 1334 1335 ret = dma_async_device_register(&bdev->common); 1336 if (ret) { 1337 dev_err(bdev->dev, "failed to register dma async device\n"); 1338 goto err_bam_channel_exit; 1339 } 1340 1341 ret = of_dma_controller_register(pdev->dev.of_node, bam_dma_xlate, 1342 &bdev->common); 1343 if (ret) 1344 goto err_unregister_dma; 1345 1346 if (bdev->controlled_remotely) { 1347 pm_runtime_disable(&pdev->dev); 1348 return 0; 1349 } 1350 1351 pm_runtime_irq_safe(&pdev->dev); 1352 pm_runtime_set_autosuspend_delay(&pdev->dev, BAM_DMA_AUTOSUSPEND_DELAY); 1353 pm_runtime_use_autosuspend(&pdev->dev); 1354 pm_runtime_mark_last_busy(&pdev->dev); 1355 pm_runtime_set_active(&pdev->dev); 1356 pm_runtime_enable(&pdev->dev); 1357 1358 return 0; 1359 1360 err_unregister_dma: 1361 dma_async_device_unregister(&bdev->common); 1362 err_bam_channel_exit: 1363 for (i = 0; i < bdev->num_channels; i++) 1364 tasklet_kill(&bdev->channels[i].vc.task); 1365 err_tasklet_kill: 1366 tasklet_kill(&bdev->task); 1367 err_disable_clk: 1368 clk_disable_unprepare(bdev->bamclk); 1369 1370 return ret; 1371 } 1372 1373 static int bam_dma_remove(struct platform_device *pdev) 1374 { 1375 struct bam_device *bdev = platform_get_drvdata(pdev); 1376 u32 i; 1377 1378 pm_runtime_force_suspend(&pdev->dev); 1379 1380 of_dma_controller_free(pdev->dev.of_node); 1381 dma_async_device_unregister(&bdev->common); 1382 1383 /* mask all interrupts for this execution environment */ 1384 writel_relaxed(0, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); 1385 1386 devm_free_irq(bdev->dev, bdev->irq, bdev); 1387 1388 for (i = 0; i < bdev->num_channels; i++) { 1389 bam_dma_terminate_all(&bdev->channels[i].vc.chan); 1390 tasklet_kill(&bdev->channels[i].vc.task); 1391 1392 if (!bdev->channels[i].fifo_virt) 1393 continue; 1394 1395 dma_free_wc(bdev->dev, BAM_DESC_FIFO_SIZE, 1396 bdev->channels[i].fifo_virt, 1397 bdev->channels[i].fifo_phys); 1398 } 1399 1400 tasklet_kill(&bdev->task); 1401 1402 clk_disable_unprepare(bdev->bamclk); 1403 1404 return 0; 1405 } 1406 1407 static int __maybe_unused bam_dma_runtime_suspend(struct device *dev) 1408 { 1409 struct bam_device *bdev = dev_get_drvdata(dev); 1410 1411 clk_disable(bdev->bamclk); 1412 1413 return 0; 1414 } 1415 1416 static int __maybe_unused bam_dma_runtime_resume(struct device *dev) 1417 { 1418 struct bam_device *bdev = dev_get_drvdata(dev); 1419 int ret; 1420 1421 ret = clk_enable(bdev->bamclk); 1422 if (ret < 0) { 1423 dev_err(dev, "clk_enable failed: %d\n", ret); 1424 return ret; 1425 } 1426 1427 return 0; 1428 } 1429 1430 static int __maybe_unused bam_dma_suspend(struct device *dev) 1431 { 1432 struct bam_device *bdev = dev_get_drvdata(dev); 1433 1434 if (!bdev->controlled_remotely) 1435 pm_runtime_force_suspend(dev); 1436 1437 clk_unprepare(bdev->bamclk); 1438 1439 return 0; 1440 } 1441 1442 static int __maybe_unused bam_dma_resume(struct device *dev) 1443 { 1444 struct bam_device *bdev = dev_get_drvdata(dev); 1445 int ret; 1446 1447 ret = clk_prepare(bdev->bamclk); 1448 if (ret) 1449 return ret; 1450 1451 if (!bdev->controlled_remotely) 1452 pm_runtime_force_resume(dev); 1453 1454 return 0; 1455 } 1456 1457 static const struct dev_pm_ops bam_dma_pm_ops = { 1458 SET_LATE_SYSTEM_SLEEP_PM_OPS(bam_dma_suspend, bam_dma_resume) 1459 SET_RUNTIME_PM_OPS(bam_dma_runtime_suspend, bam_dma_runtime_resume, 1460 NULL) 1461 }; 1462 1463 static struct platform_driver bam_dma_driver = { 1464 .probe = bam_dma_probe, 1465 .remove = bam_dma_remove, 1466 .driver = { 1467 .name = "bam-dma-engine", 1468 .pm = &bam_dma_pm_ops, 1469 .of_match_table = bam_of_match, 1470 }, 1471 }; 1472 1473 module_platform_driver(bam_dma_driver); 1474 1475 MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>"); 1476 MODULE_DESCRIPTION("QCOM BAM DMA engine driver"); 1477 MODULE_LICENSE("GPL v2"); 1478