xref: /openbmc/linux/drivers/dma/ptdma/ptdma.h (revision f959325e)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * AMD Passthru DMA device driver
4  * -- Based on the CCP driver
5  *
6  * Copyright (C) 2016,2021 Advanced Micro Devices, Inc.
7  *
8  * Author: Sanjay R Mehta <sanju.mehta@amd.com>
9  * Author: Tom Lendacky <thomas.lendacky@amd.com>
10  * Author: Gary R Hook <gary.hook@amd.com>
11  */
12 
13 #ifndef __PT_DEV_H__
14 #define __PT_DEV_H__
15 
16 #include <linux/device.h>
17 #include <linux/dmaengine.h>
18 #include <linux/pci.h>
19 #include <linux/spinlock.h>
20 #include <linux/mutex.h>
21 #include <linux/list.h>
22 #include <linux/wait.h>
23 #include <linux/dmapool.h>
24 
25 #include "../virt-dma.h"
26 
27 #define MAX_PT_NAME_LEN			16
28 #define MAX_DMAPOOL_NAME_LEN		32
29 
30 #define MAX_HW_QUEUES			1
31 #define MAX_CMD_QLEN			100
32 
33 #define PT_ENGINE_PASSTHRU		5
34 
35 /* Register Mappings */
36 #define IRQ_MASK_REG			0x040
37 #define IRQ_STATUS_REG			0x200
38 
39 #define CMD_Q_ERROR(__qs)		((__qs) & 0x0000003f)
40 
41 #define CMD_QUEUE_PRIO_OFFSET		0x00
42 #define CMD_REQID_CONFIG_OFFSET		0x04
43 #define CMD_TIMEOUT_OFFSET		0x08
44 #define CMD_PT_VERSION			0x10
45 
46 #define CMD_Q_CONTROL_BASE		0x0000
47 #define CMD_Q_TAIL_LO_BASE		0x0004
48 #define CMD_Q_HEAD_LO_BASE		0x0008
49 #define CMD_Q_INT_ENABLE_BASE		0x000C
50 #define CMD_Q_INTERRUPT_STATUS_BASE	0x0010
51 
52 #define CMD_Q_STATUS_BASE		0x0100
53 #define CMD_Q_INT_STATUS_BASE		0x0104
54 #define CMD_Q_DMA_STATUS_BASE		0x0108
55 #define CMD_Q_DMA_READ_STATUS_BASE	0x010C
56 #define CMD_Q_DMA_WRITE_STATUS_BASE	0x0110
57 #define CMD_Q_ABORT_BASE		0x0114
58 #define CMD_Q_AX_CACHE_BASE		0x0118
59 
60 #define CMD_CONFIG_OFFSET		0x1120
61 #define CMD_CLK_GATE_CTL_OFFSET		0x6004
62 
63 #define CMD_DESC_DW0_VAL		0x500012
64 
65 /* Address offset for virtual queue registers */
66 #define CMD_Q_STATUS_INCR		0x1000
67 
68 /* Bit masks */
69 #define CMD_CONFIG_REQID		0
70 #define CMD_TIMEOUT_DISABLE		0
71 #define CMD_CLK_DYN_GATING_DIS		0
72 #define CMD_CLK_SW_GATE_MODE		0
73 #define CMD_CLK_GATE_CTL		0
74 #define CMD_QUEUE_PRIO			GENMASK(2, 1)
75 #define CMD_CONFIG_VHB_EN		BIT(0)
76 #define CMD_CLK_DYN_GATING_EN		BIT(0)
77 #define CMD_CLK_HW_GATE_MODE		BIT(0)
78 #define CMD_CLK_GATE_ON_DELAY		BIT(12)
79 #define CMD_CLK_GATE_OFF_DELAY		BIT(12)
80 
81 #define CMD_CLK_GATE_CONFIG		(CMD_CLK_GATE_CTL | \
82 					CMD_CLK_HW_GATE_MODE | \
83 					CMD_CLK_GATE_ON_DELAY | \
84 					CMD_CLK_DYN_GATING_EN | \
85 					CMD_CLK_GATE_OFF_DELAY)
86 
87 #define CMD_Q_LEN			32
88 #define CMD_Q_RUN			BIT(0)
89 #define CMD_Q_HALT			BIT(1)
90 #define CMD_Q_MEM_LOCATION		BIT(2)
91 #define CMD_Q_SIZE_MASK			GENMASK(4, 0)
92 #define CMD_Q_SIZE			GENMASK(7, 3)
93 #define CMD_Q_SHIFT			GENMASK(1, 0)
94 #define QUEUE_SIZE_VAL			((ffs(CMD_Q_LEN) - 2) & \
95 								  CMD_Q_SIZE_MASK)
96 #define Q_PTR_MASK			(2 << (QUEUE_SIZE_VAL + 5) - 1)
97 #define Q_DESC_SIZE			sizeof(struct ptdma_desc)
98 #define Q_SIZE(n)			(CMD_Q_LEN * (n))
99 
100 #define INT_COMPLETION			BIT(0)
101 #define INT_ERROR			BIT(1)
102 #define INT_QUEUE_STOPPED		BIT(2)
103 #define INT_EMPTY_QUEUE			BIT(3)
104 #define SUPPORTED_INTERRUPTS		(INT_COMPLETION | INT_ERROR)
105 
106 /****** Local Storage Block ******/
107 #define LSB_START			0
108 #define LSB_END				127
109 #define LSB_COUNT			(LSB_END - LSB_START + 1)
110 
111 #define PT_DMAPOOL_MAX_SIZE		64
112 #define PT_DMAPOOL_ALIGN		BIT(5)
113 
114 #define PT_PASSTHRU_BLOCKSIZE		512
115 
116 struct pt_device;
117 
118 struct pt_tasklet_data {
119 	struct completion completion;
120 	struct pt_cmd *cmd;
121 };
122 
123 /*
124  * struct pt_passthru_engine - pass-through operation
125  *   without performing DMA mapping
126  * @mask: mask to be applied to data
127  * @mask_len: length in bytes of mask
128  * @src_dma: data to be used for this operation
129  * @dst_dma: data produced by this operation
130  * @src_len: length in bytes of data used for this operation
131  *
132  * Variables required to be set when calling pt_enqueue_cmd():
133  *   - bit_mod, byte_swap, src, dst, src_len
134  *   - mask, mask_len if bit_mod is not PT_PASSTHRU_BITWISE_NOOP
135  */
136 struct pt_passthru_engine {
137 	dma_addr_t mask;
138 	u32 mask_len;		/* In bytes */
139 
140 	dma_addr_t src_dma, dst_dma;
141 	u64 src_len;		/* In bytes */
142 };
143 
144 /*
145  * struct pt_cmd - PTDMA operation request
146  * @entry: list element
147  * @work: work element used for callbacks
148  * @pt: PT device to be run on
149  * @ret: operation return code
150  * @flags: cmd processing flags
151  * @engine: PTDMA operation to perform (passthru)
152  * @engine_error: PT engine return code
153  * @passthru: engine specific structures, refer to specific engine struct below
154  * @callback: operation completion callback function
155  * @data: parameter value to be supplied to the callback function
156  *
157  * Variables required to be set when calling pt_enqueue_cmd():
158  *   - engine, callback
159  *   - See the operation structures below for what is required for each
160  *     operation.
161  */
162 struct pt_cmd {
163 	struct list_head entry;
164 	struct work_struct work;
165 	struct pt_device *pt;
166 	int ret;
167 	u32 engine;
168 	u32 engine_error;
169 	struct pt_passthru_engine passthru;
170 	/* Completion callback support */
171 	void (*pt_cmd_callback)(void *data, int err);
172 	void *data;
173 };
174 
175 struct pt_dma_desc {
176 	struct virt_dma_desc vd;
177 	struct pt_device *pt;
178 	enum dma_status status;
179 	size_t len;
180 	bool issued_to_hw;
181 	struct pt_cmd pt_cmd;
182 };
183 
184 struct pt_dma_chan {
185 	struct virt_dma_chan vc;
186 	struct pt_device *pt;
187 };
188 
189 struct pt_cmd_queue {
190 	struct pt_device *pt;
191 
192 	/* Queue dma pool */
193 	struct dma_pool *dma_pool;
194 
195 	/* Queue base address (not neccessarily aligned)*/
196 	struct ptdma_desc *qbase;
197 
198 	/* Aligned queue start address (per requirement) */
199 	spinlock_t q_lock ____cacheline_aligned;
200 	unsigned int qidx;
201 
202 	unsigned int qsize;
203 	dma_addr_t qbase_dma;
204 	dma_addr_t qdma_tail;
205 
206 	unsigned int active;
207 	unsigned int suspended;
208 
209 	/* Interrupt flag */
210 	bool int_en;
211 
212 	/* Register addresses for queue */
213 	void __iomem *reg_control;
214 	u32 qcontrol; /* Cached control register */
215 
216 	/* Status values from job */
217 	u32 int_status;
218 	u32 q_status;
219 	u32 q_int_status;
220 	u32 cmd_error;
221 	/* Queue Statistics */
222 	unsigned long total_pt_ops;
223 } ____cacheline_aligned;
224 
225 struct pt_device {
226 	struct list_head entry;
227 
228 	unsigned int ord;
229 	char name[MAX_PT_NAME_LEN];
230 
231 	struct device *dev;
232 
233 	/* Bus specific device information */
234 	struct pt_msix *pt_msix;
235 
236 	struct pt_dev_vdata *dev_vdata;
237 
238 	unsigned int pt_irq;
239 
240 	/* I/O area used for device communication */
241 	void __iomem *io_regs;
242 
243 	spinlock_t cmd_lock ____cacheline_aligned;
244 	unsigned int cmd_count;
245 	struct list_head cmd;
246 
247 	/*
248 	 * The command queue. This represent the queue available on the
249 	 * PTDMA that are available for processing cmds
250 	 */
251 	struct pt_cmd_queue cmd_q;
252 
253 	/* Support for the DMA Engine capabilities */
254 	struct dma_device dma_dev;
255 	struct pt_dma_chan *pt_dma_chan;
256 	struct kmem_cache *dma_cmd_cache;
257 	struct kmem_cache *dma_desc_cache;
258 
259 	wait_queue_head_t lsb_queue;
260 
261 	/* Device Statistics */
262 	unsigned long total_interrupts;
263 
264 	struct pt_tasklet_data tdata;
265 };
266 
267 /*
268  * descriptor for PTDMA commands
269  * 8 32-bit words:
270  * word 0: function; engine; control bits
271  * word 1: length of source data
272  * word 2: low 32 bits of source pointer
273  * word 3: upper 16 bits of source pointer; source memory type
274  * word 4: low 32 bits of destination pointer
275  * word 5: upper 16 bits of destination pointer; destination memory type
276  * word 6: reserved 32 bits
277  * word 7: reserved 32 bits
278  */
279 
280 #define DWORD0_SOC	BIT(0)
281 #define DWORD0_IOC	BIT(1)
282 
283 struct dword3 {
284 	unsigned int  src_hi:16;
285 	unsigned int  src_mem:2;
286 	unsigned int  lsb_cxt_id:8;
287 	unsigned int  rsvd1:5;
288 	unsigned int  fixed:1;
289 };
290 
291 struct dword5 {
292 	unsigned int  dst_hi:16;
293 	unsigned int  dst_mem:2;
294 	unsigned int  rsvd1:13;
295 	unsigned int  fixed:1;
296 };
297 
298 struct ptdma_desc {
299 	u32 dw0;
300 	u32 length;
301 	u32 src_lo;
302 	struct dword3 dw3;
303 	u32 dst_lo;
304 	struct dword5 dw5;
305 	__le32 rsvd1;
306 	__le32 rsvd2;
307 };
308 
309 /* Structure to hold PT device data */
310 struct pt_dev_vdata {
311 	const unsigned int bar;
312 };
313 
314 int pt_dmaengine_register(struct pt_device *pt);
315 void pt_dmaengine_unregister(struct pt_device *pt);
316 
317 void ptdma_debugfs_setup(struct pt_device *pt);
318 int pt_core_init(struct pt_device *pt);
319 void pt_core_destroy(struct pt_device *pt);
320 
321 int pt_core_perform_passthru(struct pt_cmd_queue *cmd_q,
322 			     struct pt_passthru_engine *pt_engine);
323 
324 void pt_check_status_trans(struct pt_device *pt, struct pt_cmd_queue *cmd_q);
325 void pt_start_queue(struct pt_cmd_queue *cmd_q);
326 void pt_stop_queue(struct pt_cmd_queue *cmd_q);
327 
328 static inline void pt_core_disable_queue_interrupts(struct pt_device *pt)
329 {
330 	iowrite32(0, pt->cmd_q.reg_control + 0x000C);
331 }
332 
333 static inline void pt_core_enable_queue_interrupts(struct pt_device *pt)
334 {
335 	iowrite32(SUPPORTED_INTERRUPTS, pt->cmd_q.reg_control + 0x000C);
336 }
337 #endif
338