xref: /openbmc/linux/drivers/dma/hsu/pci.c (revision 8bd1369b)
1 /*
2  * PCI driver for the High Speed UART DMA
3  *
4  * Copyright (C) 2015 Intel Corporation
5  * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
6  *
7  * Partially based on the bits found in drivers/tty/serial/mfd.c.
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  */
13 
14 #include <linux/bitops.h>
15 #include <linux/device.h>
16 #include <linux/module.h>
17 #include <linux/pci.h>
18 
19 #include "hsu.h"
20 
21 #define HSU_PCI_DMASR		0x00
22 #define HSU_PCI_DMAISR		0x04
23 
24 #define HSU_PCI_CHAN_OFFSET	0x100
25 
26 #define PCI_DEVICE_ID_INTEL_MFLD_HSU_DMA	0x081e
27 #define PCI_DEVICE_ID_INTEL_MRFLD_HSU_DMA	0x1192
28 
29 static irqreturn_t hsu_pci_irq(int irq, void *dev)
30 {
31 	struct hsu_dma_chip *chip = dev;
32 	struct pci_dev *pdev = to_pci_dev(chip->dev);
33 	u32 dmaisr;
34 	u32 status;
35 	unsigned short i;
36 	int ret = 0;
37 	int err;
38 
39 	/*
40 	 * On Intel Tangier B0 and Anniedale the interrupt line, disregarding
41 	 * to have different numbers, is shared between HSU DMA and UART IPs.
42 	 * Thus on such SoCs we are expecting that IRQ handler is called in
43 	 * UART driver only.
44 	 */
45 	if (pdev->device == PCI_DEVICE_ID_INTEL_MRFLD_HSU_DMA)
46 		return IRQ_HANDLED;
47 
48 	dmaisr = readl(chip->regs + HSU_PCI_DMAISR);
49 	for (i = 0; i < chip->hsu->nr_channels; i++) {
50 		if (dmaisr & 0x1) {
51 			err = hsu_dma_get_status(chip, i, &status);
52 			if (err > 0)
53 				ret |= 1;
54 			else if (err == 0)
55 				ret |= hsu_dma_do_irq(chip, i, status);
56 		}
57 		dmaisr >>= 1;
58 	}
59 
60 	return IRQ_RETVAL(ret);
61 }
62 
63 static int hsu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
64 {
65 	struct hsu_dma_chip *chip;
66 	int ret;
67 
68 	ret = pcim_enable_device(pdev);
69 	if (ret)
70 		return ret;
71 
72 	ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
73 	if (ret) {
74 		dev_err(&pdev->dev, "I/O memory remapping failed\n");
75 		return ret;
76 	}
77 
78 	pci_set_master(pdev);
79 	pci_try_set_mwi(pdev);
80 
81 	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
82 	if (ret)
83 		return ret;
84 
85 	ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
86 	if (ret)
87 		return ret;
88 
89 	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
90 	if (!chip)
91 		return -ENOMEM;
92 
93 	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
94 	if (ret < 0)
95 		return ret;
96 
97 	chip->dev = &pdev->dev;
98 	chip->regs = pcim_iomap_table(pdev)[0];
99 	chip->length = pci_resource_len(pdev, 0);
100 	chip->offset = HSU_PCI_CHAN_OFFSET;
101 	chip->irq = pci_irq_vector(pdev, 0);
102 
103 	ret = hsu_dma_probe(chip);
104 	if (ret)
105 		return ret;
106 
107 	ret = request_irq(chip->irq, hsu_pci_irq, 0, "hsu_dma_pci", chip);
108 	if (ret)
109 		goto err_register_irq;
110 
111 	pci_set_drvdata(pdev, chip);
112 
113 	return 0;
114 
115 err_register_irq:
116 	hsu_dma_remove(chip);
117 	return ret;
118 }
119 
120 static void hsu_pci_remove(struct pci_dev *pdev)
121 {
122 	struct hsu_dma_chip *chip = pci_get_drvdata(pdev);
123 
124 	free_irq(chip->irq, chip);
125 	hsu_dma_remove(chip);
126 }
127 
128 static const struct pci_device_id hsu_pci_id_table[] = {
129 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MFLD_HSU_DMA), 0 },
130 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD_HSU_DMA), 0 },
131 	{ }
132 };
133 MODULE_DEVICE_TABLE(pci, hsu_pci_id_table);
134 
135 static struct pci_driver hsu_pci_driver = {
136 	.name		= "hsu_dma_pci",
137 	.id_table	= hsu_pci_id_table,
138 	.probe		= hsu_pci_probe,
139 	.remove		= hsu_pci_remove,
140 };
141 
142 module_pci_driver(hsu_pci_driver);
143 
144 MODULE_LICENSE("GPL v2");
145 MODULE_DESCRIPTION("High Speed UART DMA PCI driver");
146 MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
147