xref: /openbmc/linux/drivers/dma/fsl_raid.h (revision e2c75e76)
1 /*
2  * drivers/dma/fsl_raid.h
3  *
4  * Freescale RAID Engine device driver
5  *
6  * Author:
7  *	Harninder Rai <harninder.rai@freescale.com>
8  *	Naveen Burmi <naveenburmi@freescale.com>
9  *
10  * Rewrite:
11  *	Xuelin Shi <xuelin.shi@freescale.com>
12 
13  * Copyright (c) 2010-2012 Freescale Semiconductor, Inc.
14  *
15  * Redistribution and use in source and binary forms, with or without
16  * modification, are permitted provided that the following conditions are met:
17  *     * Redistributions of source code must retain the above copyright
18  *       notice, this list of conditions and the following disclaimer.
19  *     * Redistributions in binary form must reproduce the above copyright
20  *       notice, this list of conditions and the following disclaimer in the
21  *       documentation and/or other materials provided with the distribution.
22  *     * Neither the name of Freescale Semiconductor nor the
23  *       names of its contributors may be used to endorse or promote products
24  *       derived from this software without specific prior written permission.
25  *
26  * ALTERNATIVELY, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") as published by the Free Software
28  * Foundation, either version 2 of that License or (at your option) any
29  * later version.
30  *
31  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
32  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
33  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
34  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
35  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
36  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
37  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
38  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
39  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
40  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
41  *
42  */
43 
44 #define FSL_RE_MAX_CHANS		4
45 #define FSL_RE_DPAA_MODE		BIT(30)
46 #define FSL_RE_NON_DPAA_MODE		BIT(31)
47 #define FSL_RE_GFM_POLY			0x1d000000
48 #define FSL_RE_ADD_JOB(x)		((x) << 16)
49 #define FSL_RE_RMVD_JOB(x)		((x) << 16)
50 #define FSL_RE_CFG1_CBSI		0x08000000
51 #define FSL_RE_CFG1_CBS0		0x00080000
52 #define FSL_RE_SLOT_FULL_SHIFT		8
53 #define FSL_RE_SLOT_FULL(x)		((x) >> FSL_RE_SLOT_FULL_SHIFT)
54 #define FSL_RE_SLOT_AVAIL_SHIFT		8
55 #define FSL_RE_SLOT_AVAIL(x)		((x) >> FSL_RE_SLOT_AVAIL_SHIFT)
56 #define FSL_RE_PQ_OPCODE		0x1B
57 #define FSL_RE_XOR_OPCODE		0x1A
58 #define FSL_RE_MOVE_OPCODE		0x8
59 #define FSL_RE_FRAME_ALIGN		16
60 #define FSL_RE_BLOCK_SIZE		0x3 /* 4096 bytes */
61 #define FSL_RE_CACHEABLE_IO		0x0
62 #define FSL_RE_BUFFER_OUTPUT		0x0
63 #define FSL_RE_INTR_ON_ERROR		0x1
64 #define FSL_RE_DATA_DEP			0x1
65 #define FSL_RE_ENABLE_DPI		0x0
66 #define FSL_RE_RING_SIZE		0x400
67 #define FSL_RE_RING_SIZE_MASK		(FSL_RE_RING_SIZE - 1)
68 #define FSL_RE_RING_SIZE_SHIFT		8
69 #define FSL_RE_ADDR_BIT_SHIFT		4
70 #define FSL_RE_ADDR_BIT_MASK		(BIT(FSL_RE_ADDR_BIT_SHIFT) - 1)
71 #define FSL_RE_ERROR			0x40000000
72 #define FSL_RE_INTR			0x80000000
73 #define FSL_RE_CLR_INTR			0x80000000
74 #define FSL_RE_PAUSE			0x80000000
75 #define FSL_RE_ENABLE			0x80000000
76 #define FSL_RE_REG_LIODN_MASK		0x00000FFF
77 
78 #define FSL_RE_CDB_OPCODE_MASK		0xF8000000
79 #define FSL_RE_CDB_OPCODE_SHIFT		27
80 #define FSL_RE_CDB_EXCLEN_MASK		0x03000000
81 #define FSL_RE_CDB_EXCLEN_SHIFT		24
82 #define FSL_RE_CDB_EXCLQ1_MASK		0x00F00000
83 #define FSL_RE_CDB_EXCLQ1_SHIFT		20
84 #define FSL_RE_CDB_EXCLQ2_MASK		0x000F0000
85 #define FSL_RE_CDB_EXCLQ2_SHIFT		16
86 #define FSL_RE_CDB_BLKSIZE_MASK		0x0000C000
87 #define FSL_RE_CDB_BLKSIZE_SHIFT	14
88 #define FSL_RE_CDB_CACHE_MASK		0x00003000
89 #define FSL_RE_CDB_CACHE_SHIFT		12
90 #define FSL_RE_CDB_BUFFER_MASK		0x00000800
91 #define FSL_RE_CDB_BUFFER_SHIFT		11
92 #define FSL_RE_CDB_ERROR_MASK		0x00000400
93 #define FSL_RE_CDB_ERROR_SHIFT		10
94 #define FSL_RE_CDB_NRCS_MASK		0x0000003C
95 #define FSL_RE_CDB_NRCS_SHIFT		6
96 #define FSL_RE_CDB_DEPEND_MASK		0x00000008
97 #define FSL_RE_CDB_DEPEND_SHIFT		3
98 #define FSL_RE_CDB_DPI_MASK		0x00000004
99 #define FSL_RE_CDB_DPI_SHIFT		2
100 
101 /*
102  * the largest cf block is 19*sizeof(struct cmpnd_frame), which is 304 bytes.
103  * here 19 = 1(cdb)+2(dest)+16(src), align to 64bytes, that is 320 bytes.
104  * the largest cdb block: struct pq_cdb which is 180 bytes, adding to cf block
105  * 320+180=500, align to 64bytes, that is 512 bytes.
106  */
107 #define FSL_RE_CF_DESC_SIZE		320
108 #define FSL_RE_CF_CDB_SIZE		512
109 #define FSL_RE_CF_CDB_ALIGN		64
110 
111 struct fsl_re_ctrl {
112 	/* General Configuration Registers */
113 	__be32 global_config;	/* Global Configuration Register */
114 	u8     rsvd1[4];
115 	__be32 galois_field_config; /* Galois Field Configuration Register */
116 	u8     rsvd2[4];
117 	__be32 jq_wrr_config;   /* WRR Configuration register */
118 	u8     rsvd3[4];
119 	__be32 crc_config;	/* CRC Configuration register */
120 	u8     rsvd4[228];
121 	__be32 system_reset;	/* System Reset Register */
122 	u8     rsvd5[252];
123 	__be32 global_status;	/* Global Status Register */
124 	u8     rsvd6[832];
125 	__be32 re_liodn_base;	/* LIODN Base Register */
126 	u8     rsvd7[1712];
127 	__be32 re_version_id;	/* Version ID register of RE */
128 	__be32 re_version_id_2; /* Version ID 2 register of RE */
129 	u8     rsvd8[512];
130 	__be32 host_config;	/* Host I/F Configuration Register */
131 };
132 
133 struct fsl_re_chan_cfg {
134 	/* Registers for JR interface */
135 	__be32 jr_config_0;	/* Job Queue Configuration 0 Register */
136 	__be32 jr_config_1;	/* Job Queue Configuration 1 Register */
137 	__be32 jr_interrupt_status; /* Job Queue Interrupt Status Register */
138 	u8     rsvd1[4];
139 	__be32 jr_command;	/* Job Queue Command Register */
140 	u8     rsvd2[4];
141 	__be32 jr_status;	/* Job Queue Status Register */
142 	u8     rsvd3[228];
143 
144 	/* Input Ring */
145 	__be32 inbring_base_h;	/* Inbound Ring Base Address Register - High */
146 	__be32 inbring_base_l;	/* Inbound Ring Base Address Register - Low */
147 	__be32 inbring_size;	/* Inbound Ring Size Register */
148 	u8     rsvd4[4];
149 	__be32 inbring_slot_avail; /* Inbound Ring Slot Available Register */
150 	u8     rsvd5[4];
151 	__be32 inbring_add_job;	/* Inbound Ring Add Job Register */
152 	u8     rsvd6[4];
153 	__be32 inbring_cnsmr_indx; /* Inbound Ring Consumer Index Register */
154 	u8     rsvd7[220];
155 
156 	/* Output Ring */
157 	__be32 oubring_base_h;	/* Outbound Ring Base Address Register - High */
158 	__be32 oubring_base_l;	/* Outbound Ring Base Address Register - Low */
159 	__be32 oubring_size;	/* Outbound Ring Size Register */
160 	u8     rsvd8[4];
161 	__be32 oubring_job_rmvd; /* Outbound Ring Job Removed Register */
162 	u8     rsvd9[4];
163 	__be32 oubring_slot_full; /* Outbound Ring Slot Full Register */
164 	u8     rsvd10[4];
165 	__be32 oubring_prdcr_indx; /* Outbound Ring Producer Index */
166 };
167 
168 /*
169  * Command Descriptor Block (CDB) for unicast move command.
170  * In RAID Engine terms, memcpy is done through move command
171  */
172 struct fsl_re_move_cdb {
173 	__be32 cdb32;
174 };
175 
176 /* Data protection/integrity related fields */
177 #define FSL_RE_DPI_APPS_MASK		0xC0000000
178 #define FSL_RE_DPI_APPS_SHIFT		30
179 #define FSL_RE_DPI_REF_MASK		0x30000000
180 #define FSL_RE_DPI_REF_SHIFT		28
181 #define FSL_RE_DPI_GUARD_MASK		0x0C000000
182 #define FSL_RE_DPI_GUARD_SHIFT		26
183 #define FSL_RE_DPI_ATTR_MASK		0x03000000
184 #define FSL_RE_DPI_ATTR_SHIFT		24
185 #define FSL_RE_DPI_META_MASK		0x0000FFFF
186 
187 struct fsl_re_dpi {
188 	__be32 dpi32;
189 	__be32 ref;
190 };
191 
192 /*
193  * CDB for GenQ command. In RAID Engine terminology, XOR is
194  * done through this command
195  */
196 struct fsl_re_xor_cdb {
197 	__be32 cdb32;
198 	u8 gfm[16];
199 	struct fsl_re_dpi dpi_dest_spec;
200 	struct fsl_re_dpi dpi_src_spec[16];
201 };
202 
203 /* CDB for no-op command */
204 struct fsl_re_noop_cdb {
205 	__be32 cdb32;
206 };
207 
208 /*
209  * CDB for GenQQ command. In RAID Engine terminology, P/Q is
210  * done through this command
211  */
212 struct fsl_re_pq_cdb {
213 	__be32 cdb32;
214 	u8 gfm_q1[16];
215 	u8 gfm_q2[16];
216 	struct fsl_re_dpi dpi_dest_spec[2];
217 	struct fsl_re_dpi dpi_src_spec[16];
218 };
219 
220 /* Compound frame */
221 #define FSL_RE_CF_ADDR_HIGH_MASK	0x000000FF
222 #define FSL_RE_CF_EXT_MASK		0x80000000
223 #define FSL_RE_CF_EXT_SHIFT		31
224 #define FSL_RE_CF_FINAL_MASK		0x40000000
225 #define FSL_RE_CF_FINAL_SHIFT		30
226 #define FSL_RE_CF_LENGTH_MASK		0x000FFFFF
227 #define FSL_RE_CF_BPID_MASK		0x00FF0000
228 #define FSL_RE_CF_BPID_SHIFT		16
229 #define FSL_RE_CF_OFFSET_MASK		0x00001FFF
230 
231 struct fsl_re_cmpnd_frame {
232 	__be32 addr_high;
233 	__be32 addr_low;
234 	__be32 efrl32;
235 	__be32 rbro32;
236 };
237 
238 /* Frame descriptor */
239 #define FSL_RE_HWDESC_LIODN_MASK	0x3F000000
240 #define FSL_RE_HWDESC_LIODN_SHIFT	24
241 #define FSL_RE_HWDESC_BPID_MASK		0x00FF0000
242 #define FSL_RE_HWDESC_BPID_SHIFT	16
243 #define FSL_RE_HWDESC_ELIODN_MASK	0x0000F000
244 #define FSL_RE_HWDESC_ELIODN_SHIFT	12
245 #define FSL_RE_HWDESC_FMT_SHIFT		29
246 #define FSL_RE_HWDESC_FMT_MASK		(0x3 << FSL_RE_HWDESC_FMT_SHIFT)
247 
248 struct fsl_re_hw_desc {
249 	__be32 lbea32;
250 	__be32 addr_low;
251 	__be32 fmt32;
252 	__be32 status;
253 };
254 
255 /* Raid Engine device private data */
256 struct fsl_re_drv_private {
257 	u8 total_chans;
258 	struct dma_device dma_dev;
259 	struct fsl_re_ctrl *re_regs;
260 	struct fsl_re_chan *re_jrs[FSL_RE_MAX_CHANS];
261 	struct dma_pool *cf_desc_pool;
262 	struct dma_pool *hw_desc_pool;
263 };
264 
265 /* Per job ring data structure */
266 struct fsl_re_chan {
267 	char name[16];
268 	spinlock_t desc_lock; /* queue lock */
269 	struct list_head ack_q;  /* wait to acked queue */
270 	struct list_head active_q; /* already issued on hw, not completed */
271 	struct list_head submit_q;
272 	struct list_head free_q; /* alloc available queue */
273 	struct device *dev;
274 	struct fsl_re_drv_private *re_dev;
275 	struct dma_chan chan;
276 	struct fsl_re_chan_cfg *jrregs;
277 	int irq;
278 	struct tasklet_struct irqtask;
279 	u32 alloc_count;
280 
281 	/* hw descriptor ring for inbound queue*/
282 	dma_addr_t inb_phys_addr;
283 	struct fsl_re_hw_desc *inb_ring_virt_addr;
284 	u32 inb_count;
285 
286 	/* hw descriptor ring for outbound queue */
287 	dma_addr_t oub_phys_addr;
288 	struct fsl_re_hw_desc *oub_ring_virt_addr;
289 	u32 oub_count;
290 };
291 
292 /* Async transaction descriptor */
293 struct fsl_re_desc {
294 	struct dma_async_tx_descriptor async_tx;
295 	struct list_head node;
296 	struct fsl_re_hw_desc hwdesc;
297 	struct fsl_re_chan *re_chan;
298 
299 	/* hwdesc will point to cf_addr */
300 	void *cf_addr;
301 	dma_addr_t cf_paddr;
302 
303 	void *cdb_addr;
304 	dma_addr_t cdb_paddr;
305 	int status;
306 };
307