1 /* 2 * BCM2835 DMA engine support 3 * 4 * This driver only supports cyclic DMA transfers 5 * as needed for the I2S module. 6 * 7 * Author: Florian Meier <florian.meier@koalo.de> 8 * Copyright 2013 9 * 10 * Based on 11 * OMAP DMAengine support by Russell King 12 * 13 * BCM2708 DMA Driver 14 * Copyright (C) 2010 Broadcom 15 * 16 * Raspberry Pi PCM I2S ALSA Driver 17 * Copyright (c) by Phil Poole 2013 18 * 19 * MARVELL MMP Peripheral DMA Driver 20 * Copyright 2012 Marvell International Ltd. 21 * 22 * This program is free software; you can redistribute it and/or modify 23 * it under the terms of the GNU General Public License as published by 24 * the Free Software Foundation; either version 2 of the License, or 25 * (at your option) any later version. 26 * 27 * This program is distributed in the hope that it will be useful, 28 * but WITHOUT ANY WARRANTY; without even the implied warranty of 29 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 30 * GNU General Public License for more details. 31 */ 32 #include <linux/dmaengine.h> 33 #include <linux/dma-mapping.h> 34 #include <linux/dmapool.h> 35 #include <linux/err.h> 36 #include <linux/init.h> 37 #include <linux/interrupt.h> 38 #include <linux/list.h> 39 #include <linux/module.h> 40 #include <linux/platform_device.h> 41 #include <linux/slab.h> 42 #include <linux/io.h> 43 #include <linux/spinlock.h> 44 #include <linux/of.h> 45 #include <linux/of_dma.h> 46 47 #include "virt-dma.h" 48 49 #define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14 50 #define BCM2835_DMA_CHAN_NAME_SIZE 8 51 52 struct bcm2835_dmadev { 53 struct dma_device ddev; 54 spinlock_t lock; 55 void __iomem *base; 56 struct device_dma_parameters dma_parms; 57 }; 58 59 struct bcm2835_dma_cb { 60 uint32_t info; 61 uint32_t src; 62 uint32_t dst; 63 uint32_t length; 64 uint32_t stride; 65 uint32_t next; 66 uint32_t pad[2]; 67 }; 68 69 struct bcm2835_cb_entry { 70 struct bcm2835_dma_cb *cb; 71 dma_addr_t paddr; 72 }; 73 74 struct bcm2835_chan { 75 struct virt_dma_chan vc; 76 struct list_head node; 77 78 struct dma_slave_config cfg; 79 unsigned int dreq; 80 81 int ch; 82 struct bcm2835_desc *desc; 83 struct dma_pool *cb_pool; 84 85 void __iomem *chan_base; 86 int irq_number; 87 unsigned int irq_flags; 88 89 bool is_lite_channel; 90 }; 91 92 struct bcm2835_desc { 93 struct bcm2835_chan *c; 94 struct virt_dma_desc vd; 95 enum dma_transfer_direction dir; 96 97 unsigned int frames; 98 size_t size; 99 100 bool cyclic; 101 102 struct bcm2835_cb_entry cb_list[]; 103 }; 104 105 #define BCM2835_DMA_CS 0x00 106 #define BCM2835_DMA_ADDR 0x04 107 #define BCM2835_DMA_TI 0x08 108 #define BCM2835_DMA_SOURCE_AD 0x0c 109 #define BCM2835_DMA_DEST_AD 0x10 110 #define BCM2835_DMA_LEN 0x14 111 #define BCM2835_DMA_STRIDE 0x18 112 #define BCM2835_DMA_NEXTCB 0x1c 113 #define BCM2835_DMA_DEBUG 0x20 114 115 /* DMA CS Control and Status bits */ 116 #define BCM2835_DMA_ACTIVE BIT(0) /* activate the DMA */ 117 #define BCM2835_DMA_END BIT(1) /* current CB has ended */ 118 #define BCM2835_DMA_INT BIT(2) /* interrupt status */ 119 #define BCM2835_DMA_DREQ BIT(3) /* DREQ state */ 120 #define BCM2835_DMA_ISPAUSED BIT(4) /* Pause requested or not active */ 121 #define BCM2835_DMA_ISHELD BIT(5) /* Is held by DREQ flow control */ 122 #define BCM2835_DMA_WAITING_FOR_WRITES BIT(6) /* waiting for last 123 * AXI-write to ack 124 */ 125 #define BCM2835_DMA_ERR BIT(8) 126 #define BCM2835_DMA_PRIORITY(x) ((x & 15) << 16) /* AXI priority */ 127 #define BCM2835_DMA_PANIC_PRIORITY(x) ((x & 15) << 20) /* panic priority */ 128 /* current value of TI.BCM2835_DMA_WAIT_RESP */ 129 #define BCM2835_DMA_WAIT_FOR_WRITES BIT(28) 130 #define BCM2835_DMA_DIS_DEBUG BIT(29) /* disable debug pause signal */ 131 #define BCM2835_DMA_ABORT BIT(30) /* Stop current CB, go to next, WO */ 132 #define BCM2835_DMA_RESET BIT(31) /* WO, self clearing */ 133 134 /* Transfer information bits - also bcm2835_cb.info field */ 135 #define BCM2835_DMA_INT_EN BIT(0) 136 #define BCM2835_DMA_TDMODE BIT(1) /* 2D-Mode */ 137 #define BCM2835_DMA_WAIT_RESP BIT(3) /* wait for AXI-write to be acked */ 138 #define BCM2835_DMA_D_INC BIT(4) 139 #define BCM2835_DMA_D_WIDTH BIT(5) /* 128bit writes if set */ 140 #define BCM2835_DMA_D_DREQ BIT(6) /* enable DREQ for destination */ 141 #define BCM2835_DMA_D_IGNORE BIT(7) /* ignore destination writes */ 142 #define BCM2835_DMA_S_INC BIT(8) 143 #define BCM2835_DMA_S_WIDTH BIT(9) /* 128bit writes if set */ 144 #define BCM2835_DMA_S_DREQ BIT(10) /* enable SREQ for source */ 145 #define BCM2835_DMA_S_IGNORE BIT(11) /* ignore source reads - read 0 */ 146 #define BCM2835_DMA_BURST_LENGTH(x) ((x & 15) << 12) 147 #define BCM2835_DMA_PER_MAP(x) ((x & 31) << 16) /* REQ source */ 148 #define BCM2835_DMA_WAIT(x) ((x & 31) << 21) /* add DMA-wait cycles */ 149 #define BCM2835_DMA_NO_WIDE_BURSTS BIT(26) /* no 2 beat write bursts */ 150 151 /* debug register bits */ 152 #define BCM2835_DMA_DEBUG_LAST_NOT_SET_ERR BIT(0) 153 #define BCM2835_DMA_DEBUG_FIFO_ERR BIT(1) 154 #define BCM2835_DMA_DEBUG_READ_ERR BIT(2) 155 #define BCM2835_DMA_DEBUG_OUTSTANDING_WRITES_SHIFT 4 156 #define BCM2835_DMA_DEBUG_OUTSTANDING_WRITES_BITS 4 157 #define BCM2835_DMA_DEBUG_ID_SHIFT 16 158 #define BCM2835_DMA_DEBUG_ID_BITS 9 159 #define BCM2835_DMA_DEBUG_STATE_SHIFT 16 160 #define BCM2835_DMA_DEBUG_STATE_BITS 9 161 #define BCM2835_DMA_DEBUG_VERSION_SHIFT 25 162 #define BCM2835_DMA_DEBUG_VERSION_BITS 3 163 #define BCM2835_DMA_DEBUG_LITE BIT(28) 164 165 /* shared registers for all dma channels */ 166 #define BCM2835_DMA_INT_STATUS 0xfe0 167 #define BCM2835_DMA_ENABLE 0xff0 168 169 #define BCM2835_DMA_DATA_TYPE_S8 1 170 #define BCM2835_DMA_DATA_TYPE_S16 2 171 #define BCM2835_DMA_DATA_TYPE_S32 4 172 #define BCM2835_DMA_DATA_TYPE_S128 16 173 174 /* Valid only for channels 0 - 14, 15 has its own base address */ 175 #define BCM2835_DMA_CHAN(n) ((n) << 8) /* Base address */ 176 #define BCM2835_DMA_CHANIO(base, n) ((base) + BCM2835_DMA_CHAN(n)) 177 178 /* the max dma length for different channels */ 179 #define MAX_DMA_LEN SZ_1G 180 #define MAX_LITE_DMA_LEN (SZ_64K - 4) 181 182 static inline size_t bcm2835_dma_max_frame_length(struct bcm2835_chan *c) 183 { 184 /* lite and normal channels have different max frame length */ 185 return c->is_lite_channel ? MAX_LITE_DMA_LEN : MAX_DMA_LEN; 186 } 187 188 /* how many frames of max_len size do we need to transfer len bytes */ 189 static inline size_t bcm2835_dma_frames_for_length(size_t len, 190 size_t max_len) 191 { 192 return DIV_ROUND_UP(len, max_len); 193 } 194 195 static inline struct bcm2835_dmadev *to_bcm2835_dma_dev(struct dma_device *d) 196 { 197 return container_of(d, struct bcm2835_dmadev, ddev); 198 } 199 200 static inline struct bcm2835_chan *to_bcm2835_dma_chan(struct dma_chan *c) 201 { 202 return container_of(c, struct bcm2835_chan, vc.chan); 203 } 204 205 static inline struct bcm2835_desc *to_bcm2835_dma_desc( 206 struct dma_async_tx_descriptor *t) 207 { 208 return container_of(t, struct bcm2835_desc, vd.tx); 209 } 210 211 static void bcm2835_dma_free_cb_chain(struct bcm2835_desc *desc) 212 { 213 size_t i; 214 215 for (i = 0; i < desc->frames; i++) 216 dma_pool_free(desc->c->cb_pool, desc->cb_list[i].cb, 217 desc->cb_list[i].paddr); 218 219 kfree(desc); 220 } 221 222 static void bcm2835_dma_desc_free(struct virt_dma_desc *vd) 223 { 224 bcm2835_dma_free_cb_chain( 225 container_of(vd, struct bcm2835_desc, vd)); 226 } 227 228 static void bcm2835_dma_create_cb_set_length( 229 struct bcm2835_chan *chan, 230 struct bcm2835_dma_cb *control_block, 231 size_t len, 232 size_t period_len, 233 size_t *total_len, 234 u32 finalextrainfo) 235 { 236 size_t max_len = bcm2835_dma_max_frame_length(chan); 237 238 /* set the length taking lite-channel limitations into account */ 239 control_block->length = min_t(u32, len, max_len); 240 241 /* finished if we have no period_length */ 242 if (!period_len) 243 return; 244 245 /* 246 * period_len means: that we need to generate 247 * transfers that are terminating at every 248 * multiple of period_len - this is typically 249 * used to set the interrupt flag in info 250 * which is required during cyclic transfers 251 */ 252 253 /* have we filled in period_length yet? */ 254 if (*total_len + control_block->length < period_len) 255 return; 256 257 /* calculate the length that remains to reach period_length */ 258 control_block->length = period_len - *total_len; 259 260 /* reset total_length for next period */ 261 *total_len = 0; 262 263 /* add extrainfo bits in info */ 264 control_block->info |= finalextrainfo; 265 } 266 267 static inline size_t bcm2835_dma_count_frames_for_sg( 268 struct bcm2835_chan *c, 269 struct scatterlist *sgl, 270 unsigned int sg_len) 271 { 272 size_t frames = 0; 273 struct scatterlist *sgent; 274 unsigned int i; 275 size_t plength = bcm2835_dma_max_frame_length(c); 276 277 for_each_sg(sgl, sgent, sg_len, i) 278 frames += bcm2835_dma_frames_for_length( 279 sg_dma_len(sgent), plength); 280 281 return frames; 282 } 283 284 /** 285 * bcm2835_dma_create_cb_chain - create a control block and fills data in 286 * 287 * @chan: the @dma_chan for which we run this 288 * @direction: the direction in which we transfer 289 * @cyclic: it is a cyclic transfer 290 * @info: the default info bits to apply per controlblock 291 * @frames: number of controlblocks to allocate 292 * @src: the src address to assign (if the S_INC bit is set 293 * in @info, then it gets incremented) 294 * @dst: the dst address to assign (if the D_INC bit is set 295 * in @info, then it gets incremented) 296 * @buf_len: the full buffer length (may also be 0) 297 * @period_len: the period length when to apply @finalextrainfo 298 * in addition to the last transfer 299 * this will also break some control-blocks early 300 * @finalextrainfo: additional bits in last controlblock 301 * (or when period_len is reached in case of cyclic) 302 * @gfp: the GFP flag to use for allocation 303 */ 304 static struct bcm2835_desc *bcm2835_dma_create_cb_chain( 305 struct dma_chan *chan, enum dma_transfer_direction direction, 306 bool cyclic, u32 info, u32 finalextrainfo, size_t frames, 307 dma_addr_t src, dma_addr_t dst, size_t buf_len, 308 size_t period_len, gfp_t gfp) 309 { 310 struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); 311 size_t len = buf_len, total_len; 312 size_t frame; 313 struct bcm2835_desc *d; 314 struct bcm2835_cb_entry *cb_entry; 315 struct bcm2835_dma_cb *control_block; 316 317 if (!frames) 318 return NULL; 319 320 /* allocate and setup the descriptor. */ 321 d = kzalloc(sizeof(*d) + frames * sizeof(struct bcm2835_cb_entry), 322 gfp); 323 if (!d) 324 return NULL; 325 326 d->c = c; 327 d->dir = direction; 328 d->cyclic = cyclic; 329 330 /* 331 * Iterate over all frames, create a control block 332 * for each frame and link them together. 333 */ 334 for (frame = 0, total_len = 0; frame < frames; d->frames++, frame++) { 335 cb_entry = &d->cb_list[frame]; 336 cb_entry->cb = dma_pool_alloc(c->cb_pool, gfp, 337 &cb_entry->paddr); 338 if (!cb_entry->cb) 339 goto error_cb; 340 341 /* fill in the control block */ 342 control_block = cb_entry->cb; 343 control_block->info = info; 344 control_block->src = src; 345 control_block->dst = dst; 346 control_block->stride = 0; 347 control_block->next = 0; 348 /* set up length in control_block if requested */ 349 if (buf_len) { 350 /* calculate length honoring period_length */ 351 bcm2835_dma_create_cb_set_length( 352 c, control_block, 353 len, period_len, &total_len, 354 cyclic ? finalextrainfo : 0); 355 356 /* calculate new remaining length */ 357 len -= control_block->length; 358 } 359 360 /* link this the last controlblock */ 361 if (frame) 362 d->cb_list[frame - 1].cb->next = cb_entry->paddr; 363 364 /* update src and dst and length */ 365 if (src && (info & BCM2835_DMA_S_INC)) 366 src += control_block->length; 367 if (dst && (info & BCM2835_DMA_D_INC)) 368 dst += control_block->length; 369 370 /* Length of total transfer */ 371 d->size += control_block->length; 372 } 373 374 /* the last frame requires extra flags */ 375 d->cb_list[d->frames - 1].cb->info |= finalextrainfo; 376 377 /* detect a size missmatch */ 378 if (buf_len && (d->size != buf_len)) 379 goto error_cb; 380 381 return d; 382 error_cb: 383 bcm2835_dma_free_cb_chain(d); 384 385 return NULL; 386 } 387 388 static void bcm2835_dma_fill_cb_chain_with_sg( 389 struct dma_chan *chan, 390 enum dma_transfer_direction direction, 391 struct bcm2835_cb_entry *cb, 392 struct scatterlist *sgl, 393 unsigned int sg_len) 394 { 395 struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); 396 size_t len, max_len; 397 unsigned int i; 398 dma_addr_t addr; 399 struct scatterlist *sgent; 400 401 max_len = bcm2835_dma_max_frame_length(c); 402 for_each_sg(sgl, sgent, sg_len, i) { 403 for (addr = sg_dma_address(sgent), len = sg_dma_len(sgent); 404 len > 0; 405 addr += cb->cb->length, len -= cb->cb->length, cb++) { 406 if (direction == DMA_DEV_TO_MEM) 407 cb->cb->dst = addr; 408 else 409 cb->cb->src = addr; 410 cb->cb->length = min(len, max_len); 411 } 412 } 413 } 414 415 static int bcm2835_dma_abort(void __iomem *chan_base) 416 { 417 unsigned long cs; 418 long int timeout = 10000; 419 420 cs = readl(chan_base + BCM2835_DMA_CS); 421 if (!(cs & BCM2835_DMA_ACTIVE)) 422 return 0; 423 424 /* Write 0 to the active bit - Pause the DMA */ 425 writel(0, chan_base + BCM2835_DMA_CS); 426 427 /* Wait for any current AXI transfer to complete */ 428 while ((cs & BCM2835_DMA_ISPAUSED) && --timeout) { 429 cpu_relax(); 430 cs = readl(chan_base + BCM2835_DMA_CS); 431 } 432 433 /* We'll un-pause when we set of our next DMA */ 434 if (!timeout) 435 return -ETIMEDOUT; 436 437 if (!(cs & BCM2835_DMA_ACTIVE)) 438 return 0; 439 440 /* Terminate the control block chain */ 441 writel(0, chan_base + BCM2835_DMA_NEXTCB); 442 443 /* Abort the whole DMA */ 444 writel(BCM2835_DMA_ABORT | BCM2835_DMA_ACTIVE, 445 chan_base + BCM2835_DMA_CS); 446 447 return 0; 448 } 449 450 static void bcm2835_dma_start_desc(struct bcm2835_chan *c) 451 { 452 struct virt_dma_desc *vd = vchan_next_desc(&c->vc); 453 struct bcm2835_desc *d; 454 455 if (!vd) { 456 c->desc = NULL; 457 return; 458 } 459 460 list_del(&vd->node); 461 462 c->desc = d = to_bcm2835_dma_desc(&vd->tx); 463 464 writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR); 465 writel(BCM2835_DMA_ACTIVE, c->chan_base + BCM2835_DMA_CS); 466 } 467 468 static irqreturn_t bcm2835_dma_callback(int irq, void *data) 469 { 470 struct bcm2835_chan *c = data; 471 struct bcm2835_desc *d; 472 unsigned long flags; 473 474 /* check the shared interrupt */ 475 if (c->irq_flags & IRQF_SHARED) { 476 /* check if the interrupt is enabled */ 477 flags = readl(c->chan_base + BCM2835_DMA_CS); 478 /* if not set then we are not the reason for the irq */ 479 if (!(flags & BCM2835_DMA_INT)) 480 return IRQ_NONE; 481 } 482 483 spin_lock_irqsave(&c->vc.lock, flags); 484 485 /* Acknowledge interrupt */ 486 writel(BCM2835_DMA_INT, c->chan_base + BCM2835_DMA_CS); 487 488 d = c->desc; 489 490 if (d) { 491 if (d->cyclic) { 492 /* call the cyclic callback */ 493 vchan_cyclic_callback(&d->vd); 494 495 /* Keep the DMA engine running */ 496 writel(BCM2835_DMA_ACTIVE, 497 c->chan_base + BCM2835_DMA_CS); 498 } else { 499 vchan_cookie_complete(&c->desc->vd); 500 bcm2835_dma_start_desc(c); 501 } 502 } 503 504 spin_unlock_irqrestore(&c->vc.lock, flags); 505 506 return IRQ_HANDLED; 507 } 508 509 static int bcm2835_dma_alloc_chan_resources(struct dma_chan *chan) 510 { 511 struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); 512 struct device *dev = c->vc.chan.device->dev; 513 514 dev_dbg(dev, "Allocating DMA channel %d\n", c->ch); 515 516 c->cb_pool = dma_pool_create(dev_name(dev), dev, 517 sizeof(struct bcm2835_dma_cb), 0, 0); 518 if (!c->cb_pool) { 519 dev_err(dev, "unable to allocate descriptor pool\n"); 520 return -ENOMEM; 521 } 522 523 return request_irq(c->irq_number, bcm2835_dma_callback, 524 c->irq_flags, "DMA IRQ", c); 525 } 526 527 static void bcm2835_dma_free_chan_resources(struct dma_chan *chan) 528 { 529 struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); 530 531 vchan_free_chan_resources(&c->vc); 532 free_irq(c->irq_number, c); 533 dma_pool_destroy(c->cb_pool); 534 535 dev_dbg(c->vc.chan.device->dev, "Freeing DMA channel %u\n", c->ch); 536 } 537 538 static size_t bcm2835_dma_desc_size(struct bcm2835_desc *d) 539 { 540 return d->size; 541 } 542 543 static size_t bcm2835_dma_desc_size_pos(struct bcm2835_desc *d, dma_addr_t addr) 544 { 545 unsigned int i; 546 size_t size; 547 548 for (size = i = 0; i < d->frames; i++) { 549 struct bcm2835_dma_cb *control_block = d->cb_list[i].cb; 550 size_t this_size = control_block->length; 551 dma_addr_t dma; 552 553 if (d->dir == DMA_DEV_TO_MEM) 554 dma = control_block->dst; 555 else 556 dma = control_block->src; 557 558 if (size) 559 size += this_size; 560 else if (addr >= dma && addr < dma + this_size) 561 size += dma + this_size - addr; 562 } 563 564 return size; 565 } 566 567 static enum dma_status bcm2835_dma_tx_status(struct dma_chan *chan, 568 dma_cookie_t cookie, struct dma_tx_state *txstate) 569 { 570 struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); 571 struct virt_dma_desc *vd; 572 enum dma_status ret; 573 unsigned long flags; 574 575 ret = dma_cookie_status(chan, cookie, txstate); 576 if (ret == DMA_COMPLETE || !txstate) 577 return ret; 578 579 spin_lock_irqsave(&c->vc.lock, flags); 580 vd = vchan_find_desc(&c->vc, cookie); 581 if (vd) { 582 txstate->residue = 583 bcm2835_dma_desc_size(to_bcm2835_dma_desc(&vd->tx)); 584 } else if (c->desc && c->desc->vd.tx.cookie == cookie) { 585 struct bcm2835_desc *d = c->desc; 586 dma_addr_t pos; 587 588 if (d->dir == DMA_MEM_TO_DEV) 589 pos = readl(c->chan_base + BCM2835_DMA_SOURCE_AD); 590 else if (d->dir == DMA_DEV_TO_MEM) 591 pos = readl(c->chan_base + BCM2835_DMA_DEST_AD); 592 else 593 pos = 0; 594 595 txstate->residue = bcm2835_dma_desc_size_pos(d, pos); 596 } else { 597 txstate->residue = 0; 598 } 599 600 spin_unlock_irqrestore(&c->vc.lock, flags); 601 602 return ret; 603 } 604 605 static void bcm2835_dma_issue_pending(struct dma_chan *chan) 606 { 607 struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); 608 unsigned long flags; 609 610 spin_lock_irqsave(&c->vc.lock, flags); 611 if (vchan_issue_pending(&c->vc) && !c->desc) 612 bcm2835_dma_start_desc(c); 613 614 spin_unlock_irqrestore(&c->vc.lock, flags); 615 } 616 617 static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_memcpy( 618 struct dma_chan *chan, dma_addr_t dst, dma_addr_t src, 619 size_t len, unsigned long flags) 620 { 621 struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); 622 struct bcm2835_desc *d; 623 u32 info = BCM2835_DMA_D_INC | BCM2835_DMA_S_INC; 624 u32 extra = BCM2835_DMA_INT_EN | BCM2835_DMA_WAIT_RESP; 625 size_t max_len = bcm2835_dma_max_frame_length(c); 626 size_t frames; 627 628 /* if src, dst or len is not given return with an error */ 629 if (!src || !dst || !len) 630 return NULL; 631 632 /* calculate number of frames */ 633 frames = bcm2835_dma_frames_for_length(len, max_len); 634 635 /* allocate the CB chain - this also fills in the pointers */ 636 d = bcm2835_dma_create_cb_chain(chan, DMA_MEM_TO_MEM, false, 637 info, extra, frames, 638 src, dst, len, 0, GFP_KERNEL); 639 if (!d) 640 return NULL; 641 642 return vchan_tx_prep(&c->vc, &d->vd, flags); 643 } 644 645 static struct dma_async_tx_descriptor *bcm2835_dma_prep_slave_sg( 646 struct dma_chan *chan, 647 struct scatterlist *sgl, unsigned int sg_len, 648 enum dma_transfer_direction direction, 649 unsigned long flags, void *context) 650 { 651 struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); 652 struct bcm2835_desc *d; 653 dma_addr_t src = 0, dst = 0; 654 u32 info = BCM2835_DMA_WAIT_RESP; 655 u32 extra = BCM2835_DMA_INT_EN; 656 size_t frames; 657 658 if (!is_slave_direction(direction)) { 659 dev_err(chan->device->dev, 660 "%s: bad direction?\n", __func__); 661 return NULL; 662 } 663 664 if (c->dreq != 0) 665 info |= BCM2835_DMA_PER_MAP(c->dreq); 666 667 if (direction == DMA_DEV_TO_MEM) { 668 if (c->cfg.src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) 669 return NULL; 670 src = c->cfg.src_addr; 671 info |= BCM2835_DMA_S_DREQ | BCM2835_DMA_D_INC; 672 } else { 673 if (c->cfg.dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) 674 return NULL; 675 dst = c->cfg.dst_addr; 676 info |= BCM2835_DMA_D_DREQ | BCM2835_DMA_S_INC; 677 } 678 679 /* count frames in sg list */ 680 frames = bcm2835_dma_count_frames_for_sg(c, sgl, sg_len); 681 682 /* allocate the CB chain */ 683 d = bcm2835_dma_create_cb_chain(chan, direction, false, 684 info, extra, 685 frames, src, dst, 0, 0, 686 GFP_KERNEL); 687 if (!d) 688 return NULL; 689 690 /* fill in frames with scatterlist pointers */ 691 bcm2835_dma_fill_cb_chain_with_sg(chan, direction, d->cb_list, 692 sgl, sg_len); 693 694 return vchan_tx_prep(&c->vc, &d->vd, flags); 695 } 696 697 static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic( 698 struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, 699 size_t period_len, enum dma_transfer_direction direction, 700 unsigned long flags) 701 { 702 struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); 703 struct bcm2835_desc *d; 704 dma_addr_t src, dst; 705 u32 info = BCM2835_DMA_WAIT_RESP; 706 u32 extra = BCM2835_DMA_INT_EN; 707 size_t max_len = bcm2835_dma_max_frame_length(c); 708 size_t frames; 709 710 /* Grab configuration */ 711 if (!is_slave_direction(direction)) { 712 dev_err(chan->device->dev, "%s: bad direction?\n", __func__); 713 return NULL; 714 } 715 716 if (!buf_len) { 717 dev_err(chan->device->dev, 718 "%s: bad buffer length (= 0)\n", __func__); 719 return NULL; 720 } 721 722 /* 723 * warn if buf_len is not a multiple of period_len - this may leed 724 * to unexpected latencies for interrupts and thus audiable clicks 725 */ 726 if (buf_len % period_len) 727 dev_warn_once(chan->device->dev, 728 "%s: buffer_length (%zd) is not a multiple of period_len (%zd)\n", 729 __func__, buf_len, period_len); 730 731 /* Setup DREQ channel */ 732 if (c->dreq != 0) 733 info |= BCM2835_DMA_PER_MAP(c->dreq); 734 735 if (direction == DMA_DEV_TO_MEM) { 736 if (c->cfg.src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) 737 return NULL; 738 src = c->cfg.src_addr; 739 dst = buf_addr; 740 info |= BCM2835_DMA_S_DREQ | BCM2835_DMA_D_INC; 741 } else { 742 if (c->cfg.dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) 743 return NULL; 744 dst = c->cfg.dst_addr; 745 src = buf_addr; 746 info |= BCM2835_DMA_D_DREQ | BCM2835_DMA_S_INC; 747 } 748 749 /* calculate number of frames */ 750 frames = /* number of periods */ 751 DIV_ROUND_UP(buf_len, period_len) * 752 /* number of frames per period */ 753 bcm2835_dma_frames_for_length(period_len, max_len); 754 755 /* 756 * allocate the CB chain 757 * note that we need to use GFP_NOWAIT, as the ALSA i2s dmaengine 758 * implementation calls prep_dma_cyclic with interrupts disabled. 759 */ 760 d = bcm2835_dma_create_cb_chain(chan, direction, true, 761 info, extra, 762 frames, src, dst, buf_len, 763 period_len, GFP_NOWAIT); 764 if (!d) 765 return NULL; 766 767 /* wrap around into a loop */ 768 d->cb_list[d->frames - 1].cb->next = d->cb_list[0].paddr; 769 770 return vchan_tx_prep(&c->vc, &d->vd, flags); 771 } 772 773 static int bcm2835_dma_slave_config(struct dma_chan *chan, 774 struct dma_slave_config *cfg) 775 { 776 struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); 777 778 if ((cfg->direction == DMA_DEV_TO_MEM && 779 cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) || 780 (cfg->direction == DMA_MEM_TO_DEV && 781 cfg->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) || 782 !is_slave_direction(cfg->direction)) { 783 return -EINVAL; 784 } 785 786 c->cfg = *cfg; 787 788 return 0; 789 } 790 791 static int bcm2835_dma_terminate_all(struct dma_chan *chan) 792 { 793 struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); 794 struct bcm2835_dmadev *d = to_bcm2835_dma_dev(c->vc.chan.device); 795 unsigned long flags; 796 int timeout = 10000; 797 LIST_HEAD(head); 798 799 spin_lock_irqsave(&c->vc.lock, flags); 800 801 /* Prevent this channel being scheduled */ 802 spin_lock(&d->lock); 803 list_del_init(&c->node); 804 spin_unlock(&d->lock); 805 806 /* 807 * Stop DMA activity: we assume the callback will not be called 808 * after bcm_dma_abort() returns (even if it does, it will see 809 * c->desc is NULL and exit.) 810 */ 811 if (c->desc) { 812 bcm2835_dma_desc_free(&c->desc->vd); 813 c->desc = NULL; 814 bcm2835_dma_abort(c->chan_base); 815 816 /* Wait for stopping */ 817 while (--timeout) { 818 if (!(readl(c->chan_base + BCM2835_DMA_CS) & 819 BCM2835_DMA_ACTIVE)) 820 break; 821 822 cpu_relax(); 823 } 824 825 if (!timeout) 826 dev_err(d->ddev.dev, "DMA transfer could not be terminated\n"); 827 } 828 829 vchan_get_all_descriptors(&c->vc, &head); 830 spin_unlock_irqrestore(&c->vc.lock, flags); 831 vchan_dma_desc_free_list(&c->vc, &head); 832 833 return 0; 834 } 835 836 static int bcm2835_dma_chan_init(struct bcm2835_dmadev *d, int chan_id, 837 int irq, unsigned int irq_flags) 838 { 839 struct bcm2835_chan *c; 840 841 c = devm_kzalloc(d->ddev.dev, sizeof(*c), GFP_KERNEL); 842 if (!c) 843 return -ENOMEM; 844 845 c->vc.desc_free = bcm2835_dma_desc_free; 846 vchan_init(&c->vc, &d->ddev); 847 INIT_LIST_HEAD(&c->node); 848 849 c->chan_base = BCM2835_DMA_CHANIO(d->base, chan_id); 850 c->ch = chan_id; 851 c->irq_number = irq; 852 c->irq_flags = irq_flags; 853 854 /* check in DEBUG register if this is a LITE channel */ 855 if (readl(c->chan_base + BCM2835_DMA_DEBUG) & 856 BCM2835_DMA_DEBUG_LITE) 857 c->is_lite_channel = true; 858 859 return 0; 860 } 861 862 static void bcm2835_dma_free(struct bcm2835_dmadev *od) 863 { 864 struct bcm2835_chan *c, *next; 865 866 list_for_each_entry_safe(c, next, &od->ddev.channels, 867 vc.chan.device_node) { 868 list_del(&c->vc.chan.device_node); 869 tasklet_kill(&c->vc.task); 870 } 871 } 872 873 static const struct of_device_id bcm2835_dma_of_match[] = { 874 { .compatible = "brcm,bcm2835-dma", }, 875 {}, 876 }; 877 MODULE_DEVICE_TABLE(of, bcm2835_dma_of_match); 878 879 static struct dma_chan *bcm2835_dma_xlate(struct of_phandle_args *spec, 880 struct of_dma *ofdma) 881 { 882 struct bcm2835_dmadev *d = ofdma->of_dma_data; 883 struct dma_chan *chan; 884 885 chan = dma_get_any_slave_channel(&d->ddev); 886 if (!chan) 887 return NULL; 888 889 /* Set DREQ from param */ 890 to_bcm2835_dma_chan(chan)->dreq = spec->args[0]; 891 892 return chan; 893 } 894 895 static int bcm2835_dma_probe(struct platform_device *pdev) 896 { 897 struct bcm2835_dmadev *od; 898 struct resource *res; 899 void __iomem *base; 900 int rc; 901 int i, j; 902 int irq[BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED + 1]; 903 int irq_flags; 904 uint32_t chans_available; 905 char chan_name[BCM2835_DMA_CHAN_NAME_SIZE]; 906 907 if (!pdev->dev.dma_mask) 908 pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; 909 910 rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); 911 if (rc) 912 return rc; 913 914 od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL); 915 if (!od) 916 return -ENOMEM; 917 918 pdev->dev.dma_parms = &od->dma_parms; 919 dma_set_max_seg_size(&pdev->dev, 0x3FFFFFFF); 920 921 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 922 base = devm_ioremap_resource(&pdev->dev, res); 923 if (IS_ERR(base)) 924 return PTR_ERR(base); 925 926 od->base = base; 927 928 dma_cap_set(DMA_SLAVE, od->ddev.cap_mask); 929 dma_cap_set(DMA_PRIVATE, od->ddev.cap_mask); 930 dma_cap_set(DMA_CYCLIC, od->ddev.cap_mask); 931 dma_cap_set(DMA_SLAVE, od->ddev.cap_mask); 932 dma_cap_set(DMA_MEMCPY, od->ddev.cap_mask); 933 od->ddev.device_alloc_chan_resources = bcm2835_dma_alloc_chan_resources; 934 od->ddev.device_free_chan_resources = bcm2835_dma_free_chan_resources; 935 od->ddev.device_tx_status = bcm2835_dma_tx_status; 936 od->ddev.device_issue_pending = bcm2835_dma_issue_pending; 937 od->ddev.device_prep_dma_cyclic = bcm2835_dma_prep_dma_cyclic; 938 od->ddev.device_prep_slave_sg = bcm2835_dma_prep_slave_sg; 939 od->ddev.device_prep_dma_memcpy = bcm2835_dma_prep_dma_memcpy; 940 od->ddev.device_config = bcm2835_dma_slave_config; 941 od->ddev.device_terminate_all = bcm2835_dma_terminate_all; 942 od->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); 943 od->ddev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); 944 od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV) | 945 BIT(DMA_MEM_TO_MEM); 946 od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; 947 od->ddev.dev = &pdev->dev; 948 INIT_LIST_HEAD(&od->ddev.channels); 949 spin_lock_init(&od->lock); 950 951 platform_set_drvdata(pdev, od); 952 953 /* Request DMA channel mask from device tree */ 954 if (of_property_read_u32(pdev->dev.of_node, 955 "brcm,dma-channel-mask", 956 &chans_available)) { 957 dev_err(&pdev->dev, "Failed to get channel mask\n"); 958 rc = -EINVAL; 959 goto err_no_dma; 960 } 961 962 /* get irqs for each channel that we support */ 963 for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) { 964 /* skip masked out channels */ 965 if (!(chans_available & (1 << i))) { 966 irq[i] = -1; 967 continue; 968 } 969 970 /* get the named irq */ 971 snprintf(chan_name, sizeof(chan_name), "dma%i", i); 972 irq[i] = platform_get_irq_byname(pdev, chan_name); 973 if (irq[i] >= 0) 974 continue; 975 976 /* legacy device tree case handling */ 977 dev_warn_once(&pdev->dev, 978 "missing interrupt-names property in device tree - legacy interpretation is used\n"); 979 /* 980 * in case of channel >= 11 981 * use the 11th interrupt and that is shared 982 */ 983 irq[i] = platform_get_irq(pdev, i < 11 ? i : 11); 984 } 985 986 /* get irqs for each channel */ 987 for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) { 988 /* skip channels without irq */ 989 if (irq[i] < 0) 990 continue; 991 992 /* check if there are other channels that also use this irq */ 993 irq_flags = 0; 994 for (j = 0; j <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; j++) 995 if ((i != j) && (irq[j] == irq[i])) { 996 irq_flags = IRQF_SHARED; 997 break; 998 } 999 1000 /* initialize the channel */ 1001 rc = bcm2835_dma_chan_init(od, i, irq[i], irq_flags); 1002 if (rc) 1003 goto err_no_dma; 1004 } 1005 1006 dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", i); 1007 1008 /* Device-tree DMA controller registration */ 1009 rc = of_dma_controller_register(pdev->dev.of_node, 1010 bcm2835_dma_xlate, od); 1011 if (rc) { 1012 dev_err(&pdev->dev, "Failed to register DMA controller\n"); 1013 goto err_no_dma; 1014 } 1015 1016 rc = dma_async_device_register(&od->ddev); 1017 if (rc) { 1018 dev_err(&pdev->dev, 1019 "Failed to register slave DMA engine device: %d\n", rc); 1020 goto err_no_dma; 1021 } 1022 1023 dev_dbg(&pdev->dev, "Load BCM2835 DMA engine driver\n"); 1024 1025 return 0; 1026 1027 err_no_dma: 1028 bcm2835_dma_free(od); 1029 return rc; 1030 } 1031 1032 static int bcm2835_dma_remove(struct platform_device *pdev) 1033 { 1034 struct bcm2835_dmadev *od = platform_get_drvdata(pdev); 1035 1036 dma_async_device_unregister(&od->ddev); 1037 bcm2835_dma_free(od); 1038 1039 return 0; 1040 } 1041 1042 static struct platform_driver bcm2835_dma_driver = { 1043 .probe = bcm2835_dma_probe, 1044 .remove = bcm2835_dma_remove, 1045 .driver = { 1046 .name = "bcm2835-dma", 1047 .of_match_table = of_match_ptr(bcm2835_dma_of_match), 1048 }, 1049 }; 1050 1051 module_platform_driver(bcm2835_dma_driver); 1052 1053 MODULE_ALIAS("platform:bcm2835-dma"); 1054 MODULE_DESCRIPTION("BCM2835 DMA engine driver"); 1055 MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>"); 1056 MODULE_LICENSE("GPL v2"); 1057