xref: /openbmc/linux/drivers/devfreq/Kconfig (revision f519cd13)
1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig PM_DEVFREQ
3	bool "Generic Dynamic Voltage and Frequency Scaling (DVFS) support"
4	select SRCU
5	select PM_OPP
6	help
7	  A device may have a list of frequencies and voltages available.
8	  devfreq, a generic DVFS framework can be registered for a device
9	  in order to let the governor provided to devfreq choose an
10	  operating frequency based on the device driver's policy.
11
12	  Each device may have its own governor and policy. Devfreq can
13	  reevaluate the device state periodically and/or based on the
14	  notification to "nb", a notifier block, of devfreq.
15
16	  Like some CPUs with CPUfreq, a device may have multiple clocks.
17	  However, because the clock frequencies of a single device are
18	  determined by the single device's state, an instance of devfreq
19	  is attached to a single device and returns a "representative"
20	  clock frequency of the device, which is also attached
21	  to a device by 1-to-1. The device registering devfreq takes the
22	  responsibility to "interpret" the representative frequency and
23	  to set its every clock accordingly with the "target" callback
24	  given to devfreq.
25
26	  When OPP is used with the devfreq device, it is recommended to
27	  register devfreq's nb to the OPP's notifier head.  If OPP is
28	  used with the devfreq device, you may use OPP helper
29	  functions defined in devfreq.h.
30
31if PM_DEVFREQ
32
33comment "DEVFREQ Governors"
34
35config DEVFREQ_GOV_SIMPLE_ONDEMAND
36	tristate "Simple Ondemand"
37	help
38	  Chooses frequency based on the recent load on the device. Works
39	  similar as ONDEMAND governor of CPUFREQ does. A device with
40	  Simple-Ondemand should be able to provide busy/total counter
41	  values that imply the usage rate. A device may provide tuned
42	  values to the governor with data field at devfreq_add_device().
43
44config DEVFREQ_GOV_PERFORMANCE
45	tristate "Performance"
46	help
47	  Sets the frequency at the maximum available frequency.
48	  This governor always returns UINT_MAX as frequency so that
49	  the DEVFREQ framework returns the highest frequency available
50	  at any time.
51
52config DEVFREQ_GOV_POWERSAVE
53	tristate "Powersave"
54	help
55	  Sets the frequency at the minimum available frequency.
56	  This governor always returns 0 as frequency so that
57	  the DEVFREQ framework returns the lowest frequency available
58	  at any time.
59
60config DEVFREQ_GOV_USERSPACE
61	tristate "Userspace"
62	help
63	  Sets the frequency at the user specified one.
64	  This governor returns the user configured frequency if there
65	  has been an input to /sys/devices/.../power/devfreq_set_freq.
66	  Otherwise, the governor does not change the frequency
67	  given at the initialization.
68
69config DEVFREQ_GOV_PASSIVE
70	tristate "Passive"
71	help
72	  Sets the frequency based on the frequency of its parent devfreq
73	  device. This governor does not change the frequency by itself
74	  through sysfs entries. The passive governor recommends that
75	  devfreq device uses the OPP table to get the frequency/voltage.
76
77comment "DEVFREQ Drivers"
78
79config ARM_EXYNOS_BUS_DEVFREQ
80	tristate "ARM EXYNOS Generic Memory Bus DEVFREQ Driver"
81	depends on ARCH_EXYNOS || COMPILE_TEST
82	select DEVFREQ_GOV_SIMPLE_ONDEMAND
83	select DEVFREQ_GOV_PASSIVE
84	select DEVFREQ_EVENT_EXYNOS_PPMU
85	select PM_DEVFREQ_EVENT
86	help
87	  This adds the common DEVFREQ driver for Exynos Memory bus. Exynos
88	  Memory bus has one more group of memory bus (e.g, MIF and INT block).
89	  Each memory bus group could contain many memoby bus block. It reads
90	  PPMU counters of memory controllers by using DEVFREQ-event device
91	  and adjusts the operating frequencies and voltages with OPP support.
92	  This does not yet operate with optimal voltages.
93
94config ARM_TEGRA_DEVFREQ
95	tristate "NVIDIA Tegra30/114/124/210 DEVFREQ Driver"
96	depends on ARCH_TEGRA_3x_SOC || ARCH_TEGRA_114_SOC || \
97		ARCH_TEGRA_132_SOC || ARCH_TEGRA_124_SOC || \
98		ARCH_TEGRA_210_SOC || \
99		COMPILE_TEST
100	depends on COMMON_CLK
101	help
102	  This adds the DEVFREQ driver for the Tegra family of SoCs.
103	  It reads ACTMON counters of memory controllers and adjusts the
104	  operating frequencies and voltages with OPP support.
105
106config ARM_TEGRA20_DEVFREQ
107	tristate "NVIDIA Tegra20 DEVFREQ Driver"
108	depends on (TEGRA_MC && TEGRA20_EMC) || COMPILE_TEST
109	depends on COMMON_CLK
110	select DEVFREQ_GOV_SIMPLE_ONDEMAND
111	help
112	  This adds the DEVFREQ driver for the Tegra20 family of SoCs.
113	  It reads Memory Controller counters and adjusts the operating
114	  frequencies and voltages with OPP support.
115
116config ARM_RK3399_DMC_DEVFREQ
117	tristate "ARM RK3399 DMC DEVFREQ Driver"
118	depends on ARCH_ROCKCHIP
119	select DEVFREQ_EVENT_ROCKCHIP_DFI
120	select DEVFREQ_GOV_SIMPLE_ONDEMAND
121	select PM_DEVFREQ_EVENT
122	help
123          This adds the DEVFREQ driver for the RK3399 DMC(Dynamic Memory Controller).
124          It sets the frequency for the memory controller and reads the usage counts
125          from hardware.
126
127source "drivers/devfreq/event/Kconfig"
128
129endif # PM_DEVFREQ
130