xref: /openbmc/linux/drivers/cxl/mem.c (revision c4f461a1)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /* Copyright(c) 2022 Intel Corporation. All rights reserved. */
3 #include <linux/debugfs.h>
4 #include <linux/device.h>
5 #include <linux/module.h>
6 #include <linux/pci.h>
7 
8 #include "cxlmem.h"
9 #include "cxlpci.h"
10 
11 /**
12  * DOC: cxl mem
13  *
14  * CXL memory endpoint devices and switches are CXL capable devices that are
15  * participating in CXL.mem protocol. Their functionality builds on top of the
16  * CXL.io protocol that allows enumerating and configuring components via
17  * standard PCI mechanisms.
18  *
19  * The cxl_mem driver owns kicking off the enumeration of this CXL.mem
20  * capability. With the detection of a CXL capable endpoint, the driver will
21  * walk up to find the platform specific port it is connected to, and determine
22  * if there are intervening switches in the path. If there are switches, a
23  * secondary action is to enumerate those (implemented in cxl_core). Finally the
24  * cxl_mem driver adds the device it is bound to as a CXL endpoint-port for use
25  * in higher level operations.
26  */
27 
28 static void enable_suspend(void *data)
29 {
30 	cxl_mem_active_dec();
31 }
32 
33 static void remove_debugfs(void *dentry)
34 {
35 	debugfs_remove_recursive(dentry);
36 }
37 
38 static int cxl_mem_dpa_show(struct seq_file *file, void *data)
39 {
40 	struct device *dev = file->private;
41 	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
42 
43 	cxl_dpa_debug(file, cxlmd->cxlds);
44 
45 	return 0;
46 }
47 
48 static int devm_cxl_add_endpoint(struct device *host, struct cxl_memdev *cxlmd,
49 				 struct cxl_dport *parent_dport)
50 {
51 	struct cxl_port *parent_port = parent_dport->port;
52 	struct cxl_dev_state *cxlds = cxlmd->cxlds;
53 	struct cxl_port *endpoint, *iter, *down;
54 	resource_size_t component_reg_phys;
55 	int rc;
56 
57 	/*
58 	 * Now that the path to the root is established record all the
59 	 * intervening ports in the chain.
60 	 */
61 	for (iter = parent_port, down = NULL; !is_cxl_root(iter);
62 	     down = iter, iter = to_cxl_port(iter->dev.parent)) {
63 		struct cxl_ep *ep;
64 
65 		ep = cxl_ep_load(iter, cxlmd);
66 		ep->next = down;
67 	}
68 
69 	/*
70 	 * The component registers for an RCD might come from the
71 	 * host-bridge RCRB if they are not already mapped via the
72 	 * typical register locator mechanism.
73 	 */
74 	if (parent_dport->rch && cxlds->component_reg_phys == CXL_RESOURCE_NONE)
75 		component_reg_phys = cxl_rcrb_to_component(
76 			&cxlmd->dev, parent_dport->rcrb, CXL_RCRB_UPSTREAM);
77 	else
78 		component_reg_phys = cxlds->component_reg_phys;
79 	endpoint = devm_cxl_add_port(host, &cxlmd->dev, component_reg_phys,
80 				     parent_dport);
81 	if (IS_ERR(endpoint))
82 		return PTR_ERR(endpoint);
83 
84 	rc = cxl_endpoint_autoremove(cxlmd, endpoint);
85 	if (rc)
86 		return rc;
87 
88 	if (!endpoint->dev.driver) {
89 		dev_err(&cxlmd->dev, "%s failed probe\n",
90 			dev_name(&endpoint->dev));
91 		return -ENXIO;
92 	}
93 
94 	return 0;
95 }
96 
97 static int cxl_debugfs_poison_inject(void *data, u64 dpa)
98 {
99 	struct cxl_memdev *cxlmd = data;
100 
101 	return cxl_inject_poison(cxlmd, dpa);
102 }
103 
104 DEFINE_DEBUGFS_ATTRIBUTE(cxl_poison_inject_fops, NULL,
105 			 cxl_debugfs_poison_inject, "%llx\n");
106 
107 static int cxl_debugfs_poison_clear(void *data, u64 dpa)
108 {
109 	struct cxl_memdev *cxlmd = data;
110 
111 	return cxl_clear_poison(cxlmd, dpa);
112 }
113 
114 DEFINE_DEBUGFS_ATTRIBUTE(cxl_poison_clear_fops, NULL,
115 			 cxl_debugfs_poison_clear, "%llx\n");
116 
117 static int cxl_mem_probe(struct device *dev)
118 {
119 	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
120 	struct cxl_dev_state *cxlds = cxlmd->cxlds;
121 	struct device *endpoint_parent;
122 	struct cxl_port *parent_port;
123 	struct cxl_dport *dport;
124 	struct dentry *dentry;
125 	int rc;
126 
127 	if (!cxlds->media_ready)
128 		return -EBUSY;
129 
130 	/*
131 	 * Someone is trying to reattach this device after it lost its port
132 	 * connection (an endpoint port previously registered by this memdev was
133 	 * disabled). This racy check is ok because if the port is still gone,
134 	 * no harm done, and if the port hierarchy comes back it will re-trigger
135 	 * this probe. Port rescan and memdev detach work share the same
136 	 * single-threaded workqueue.
137 	 */
138 	if (work_pending(&cxlmd->detach_work))
139 		return -EBUSY;
140 
141 	dentry = cxl_debugfs_create_dir(dev_name(dev));
142 	debugfs_create_devm_seqfile(dev, "dpamem", dentry, cxl_mem_dpa_show);
143 
144 	if (test_bit(CXL_POISON_ENABLED_INJECT, cxlds->poison.enabled_cmds))
145 		debugfs_create_file("inject_poison", 0200, dentry, cxlmd,
146 				    &cxl_poison_inject_fops);
147 	if (test_bit(CXL_POISON_ENABLED_CLEAR, cxlds->poison.enabled_cmds))
148 		debugfs_create_file("clear_poison", 0200, dentry, cxlmd,
149 				    &cxl_poison_clear_fops);
150 
151 	rc = devm_add_action_or_reset(dev, remove_debugfs, dentry);
152 	if (rc)
153 		return rc;
154 
155 	rc = devm_cxl_enumerate_ports(cxlmd);
156 	if (rc)
157 		return rc;
158 
159 	parent_port = cxl_mem_find_port(cxlmd, &dport);
160 	if (!parent_port) {
161 		dev_err(dev, "CXL port topology not found\n");
162 		return -ENXIO;
163 	}
164 
165 	if (dport->rch)
166 		endpoint_parent = parent_port->uport;
167 	else
168 		endpoint_parent = &parent_port->dev;
169 
170 	device_lock(endpoint_parent);
171 	if (!endpoint_parent->driver) {
172 		dev_err(dev, "CXL port topology %s not enabled\n",
173 			dev_name(endpoint_parent));
174 		rc = -ENXIO;
175 		goto unlock;
176 	}
177 
178 	rc = devm_cxl_add_endpoint(endpoint_parent, cxlmd, dport);
179 unlock:
180 	device_unlock(endpoint_parent);
181 	put_device(&parent_port->dev);
182 	if (rc)
183 		return rc;
184 
185 	if (resource_size(&cxlds->pmem_res) && IS_ENABLED(CONFIG_CXL_PMEM)) {
186 		rc = devm_cxl_add_nvdimm(cxlmd);
187 		if (rc == -ENODEV)
188 			dev_info(dev, "PMEM disabled by platform\n");
189 		else
190 			return rc;
191 	}
192 
193 	/*
194 	 * The kernel may be operating out of CXL memory on this device,
195 	 * there is no spec defined way to determine whether this device
196 	 * preserves contents over suspend, and there is no simple way
197 	 * to arrange for the suspend image to avoid CXL memory which
198 	 * would setup a circular dependency between PCI resume and save
199 	 * state restoration.
200 	 *
201 	 * TODO: support suspend when all the regions this device is
202 	 * hosting are locked and covered by the system address map,
203 	 * i.e. platform firmware owns restoring the HDM configuration
204 	 * that it locked.
205 	 */
206 	cxl_mem_active_inc();
207 	return devm_add_action_or_reset(dev, enable_suspend, NULL);
208 }
209 
210 static ssize_t trigger_poison_list_store(struct device *dev,
211 					 struct device_attribute *attr,
212 					 const char *buf, size_t len)
213 {
214 	bool trigger;
215 	int rc;
216 
217 	if (kstrtobool(buf, &trigger) || !trigger)
218 		return -EINVAL;
219 
220 	rc = cxl_trigger_poison_list(to_cxl_memdev(dev));
221 
222 	return rc ? rc : len;
223 }
224 static DEVICE_ATTR_WO(trigger_poison_list);
225 
226 static umode_t cxl_mem_visible(struct kobject *kobj, struct attribute *a, int n)
227 {
228 	if (a == &dev_attr_trigger_poison_list.attr) {
229 		struct device *dev = kobj_to_dev(kobj);
230 
231 		if (!test_bit(CXL_POISON_ENABLED_LIST,
232 			      to_cxl_memdev(dev)->cxlds->poison.enabled_cmds))
233 			return 0;
234 	}
235 	return a->mode;
236 }
237 
238 static struct attribute *cxl_mem_attrs[] = {
239 	&dev_attr_trigger_poison_list.attr,
240 	NULL
241 };
242 
243 static struct attribute_group cxl_mem_group = {
244 	.attrs = cxl_mem_attrs,
245 	.is_visible = cxl_mem_visible,
246 };
247 
248 __ATTRIBUTE_GROUPS(cxl_mem);
249 
250 static struct cxl_driver cxl_mem_driver = {
251 	.name = "cxl_mem",
252 	.probe = cxl_mem_probe,
253 	.id = CXL_DEVICE_MEMORY_EXPANDER,
254 	.drv = {
255 		.dev_groups = cxl_mem_groups,
256 	},
257 };
258 
259 module_cxl_driver(cxl_mem_driver);
260 
261 MODULE_LICENSE("GPL v2");
262 MODULE_IMPORT_NS(CXL);
263 MODULE_ALIAS_CXL(CXL_DEVICE_MEMORY_EXPANDER);
264 /*
265  * create_endpoint() wants to validate port driver attach immediately after
266  * endpoint registration.
267  */
268 MODULE_SOFTDEP("pre: cxl_port");
269