xref: /openbmc/linux/drivers/cxl/core/pci.c (revision 7fc96d71)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /* Copyright(c) 2021 Intel Corporation. All rights reserved. */
3 #include <linux/io-64-nonatomic-lo-hi.h>
4 #include <linux/device.h>
5 #include <linux/delay.h>
6 #include <linux/pci.h>
7 #include <cxlpci.h>
8 #include <cxlmem.h>
9 #include <cxl.h>
10 #include "core.h"
11 
12 /**
13  * DOC: cxl core pci
14  *
15  * Compute Express Link protocols are layered on top of PCIe. CXL core provides
16  * a set of helpers for CXL interactions which occur via PCIe.
17  */
18 
19 static unsigned short media_ready_timeout = 60;
20 module_param(media_ready_timeout, ushort, 0644);
21 MODULE_PARM_DESC(media_ready_timeout, "seconds to wait for media ready");
22 
23 struct cxl_walk_context {
24 	struct pci_bus *bus;
25 	struct cxl_port *port;
26 	int type;
27 	int error;
28 	int count;
29 };
30 
31 static int match_add_dports(struct pci_dev *pdev, void *data)
32 {
33 	struct cxl_walk_context *ctx = data;
34 	struct cxl_port *port = ctx->port;
35 	int type = pci_pcie_type(pdev);
36 	struct cxl_register_map map;
37 	struct cxl_dport *dport;
38 	u32 lnkcap, port_num;
39 	int rc;
40 
41 	if (pdev->bus != ctx->bus)
42 		return 0;
43 	if (!pci_is_pcie(pdev))
44 		return 0;
45 	if (type != ctx->type)
46 		return 0;
47 	if (pci_read_config_dword(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCAP,
48 				  &lnkcap))
49 		return 0;
50 
51 	rc = cxl_find_regblock(pdev, CXL_REGLOC_RBI_COMPONENT, &map);
52 	if (rc)
53 		dev_dbg(&port->dev, "failed to find component registers\n");
54 
55 	port_num = FIELD_GET(PCI_EXP_LNKCAP_PN, lnkcap);
56 	dport = devm_cxl_add_dport(port, &pdev->dev, port_num,
57 				   cxl_regmap_to_base(pdev, &map));
58 	if (IS_ERR(dport)) {
59 		ctx->error = PTR_ERR(dport);
60 		return PTR_ERR(dport);
61 	}
62 	ctx->count++;
63 
64 	dev_dbg(&port->dev, "add dport%d: %s\n", port_num, dev_name(&pdev->dev));
65 
66 	return 0;
67 }
68 
69 /**
70  * devm_cxl_port_enumerate_dports - enumerate downstream ports of the upstream port
71  * @port: cxl_port whose ->uport is the upstream of dports to be enumerated
72  *
73  * Returns a positive number of dports enumerated or a negative error
74  * code.
75  */
76 int devm_cxl_port_enumerate_dports(struct cxl_port *port)
77 {
78 	struct pci_bus *bus = cxl_port_to_pci_bus(port);
79 	struct cxl_walk_context ctx;
80 	int type;
81 
82 	if (!bus)
83 		return -ENXIO;
84 
85 	if (pci_is_root_bus(bus))
86 		type = PCI_EXP_TYPE_ROOT_PORT;
87 	else
88 		type = PCI_EXP_TYPE_DOWNSTREAM;
89 
90 	ctx = (struct cxl_walk_context) {
91 		.port = port,
92 		.bus = bus,
93 		.type = type,
94 	};
95 	pci_walk_bus(bus, match_add_dports, &ctx);
96 
97 	if (ctx.count == 0)
98 		return -ENODEV;
99 	if (ctx.error)
100 		return ctx.error;
101 	return ctx.count;
102 }
103 EXPORT_SYMBOL_NS_GPL(devm_cxl_port_enumerate_dports, CXL);
104 
105 /*
106  * Wait up to @media_ready_timeout for the device to report memory
107  * active.
108  */
109 int cxl_await_media_ready(struct cxl_dev_state *cxlds)
110 {
111 	struct pci_dev *pdev = to_pci_dev(cxlds->dev);
112 	int d = cxlds->cxl_dvsec;
113 	bool active = false;
114 	u64 md_status;
115 	int rc, i;
116 
117 	for (i = media_ready_timeout; i; i--) {
118 		u32 temp;
119 
120 		rc = pci_read_config_dword(
121 			pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(0), &temp);
122 		if (rc)
123 			return rc;
124 
125 		active = FIELD_GET(CXL_DVSEC_MEM_ACTIVE, temp);
126 		if (active)
127 			break;
128 		msleep(1000);
129 	}
130 
131 	if (!active) {
132 		dev_err(&pdev->dev,
133 			"timeout awaiting memory active after %d seconds\n",
134 			media_ready_timeout);
135 		return -ETIMEDOUT;
136 	}
137 
138 	md_status = readq(cxlds->regs.memdev + CXLMDEV_STATUS_OFFSET);
139 	if (!CXLMDEV_READY(md_status))
140 		return -EIO;
141 
142 	return 0;
143 }
144 EXPORT_SYMBOL_NS_GPL(cxl_await_media_ready, CXL);
145 
146 static int wait_for_valid(struct cxl_dev_state *cxlds)
147 {
148 	struct pci_dev *pdev = to_pci_dev(cxlds->dev);
149 	int d = cxlds->cxl_dvsec, rc;
150 	u32 val;
151 
152 	/*
153 	 * Memory_Info_Valid: When set, indicates that the CXL Range 1 Size high
154 	 * and Size Low registers are valid. Must be set within 1 second of
155 	 * deassertion of reset to CXL device. Likely it is already set by the
156 	 * time this runs, but otherwise give a 1.5 second timeout in case of
157 	 * clock skew.
158 	 */
159 	rc = pci_read_config_dword(pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(0), &val);
160 	if (rc)
161 		return rc;
162 
163 	if (val & CXL_DVSEC_MEM_INFO_VALID)
164 		return 0;
165 
166 	msleep(1500);
167 
168 	rc = pci_read_config_dword(pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(0), &val);
169 	if (rc)
170 		return rc;
171 
172 	if (val & CXL_DVSEC_MEM_INFO_VALID)
173 		return 0;
174 
175 	return -ETIMEDOUT;
176 }
177 
178 static int cxl_set_mem_enable(struct cxl_dev_state *cxlds, u16 val)
179 {
180 	struct pci_dev *pdev = to_pci_dev(cxlds->dev);
181 	int d = cxlds->cxl_dvsec;
182 	u16 ctrl;
183 	int rc;
184 
185 	rc = pci_read_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, &ctrl);
186 	if (rc < 0)
187 		return rc;
188 
189 	if ((ctrl & CXL_DVSEC_MEM_ENABLE) == val)
190 		return 1;
191 	ctrl &= ~CXL_DVSEC_MEM_ENABLE;
192 	ctrl |= val;
193 
194 	rc = pci_write_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, ctrl);
195 	if (rc < 0)
196 		return rc;
197 
198 	return 0;
199 }
200 
201 static void clear_mem_enable(void *cxlds)
202 {
203 	cxl_set_mem_enable(cxlds, 0);
204 }
205 
206 static int devm_cxl_enable_mem(struct device *host, struct cxl_dev_state *cxlds)
207 {
208 	int rc;
209 
210 	rc = cxl_set_mem_enable(cxlds, CXL_DVSEC_MEM_ENABLE);
211 	if (rc < 0)
212 		return rc;
213 	if (rc > 0)
214 		return 0;
215 	return devm_add_action_or_reset(host, clear_mem_enable, cxlds);
216 }
217 
218 static bool range_contains(struct range *r1, struct range *r2)
219 {
220 	return r1->start <= r2->start && r1->end >= r2->end;
221 }
222 
223 /* require dvsec ranges to be covered by a locked platform window */
224 static int dvsec_range_allowed(struct device *dev, void *arg)
225 {
226 	struct range *dev_range = arg;
227 	struct cxl_decoder *cxld;
228 	struct range root_range;
229 
230 	if (!is_root_decoder(dev))
231 		return 0;
232 
233 	cxld = to_cxl_decoder(dev);
234 
235 	if (!(cxld->flags & CXL_DECODER_F_LOCK))
236 		return 0;
237 	if (!(cxld->flags & CXL_DECODER_F_RAM))
238 		return 0;
239 
240 	root_range = (struct range) {
241 		.start = cxld->platform_res.start,
242 		.end = cxld->platform_res.end,
243 	};
244 
245 	return range_contains(&root_range, dev_range);
246 }
247 
248 static void disable_hdm(void *_cxlhdm)
249 {
250 	u32 global_ctrl;
251 	struct cxl_hdm *cxlhdm = _cxlhdm;
252 	void __iomem *hdm = cxlhdm->regs.hdm_decoder;
253 
254 	global_ctrl = readl(hdm + CXL_HDM_DECODER_CTRL_OFFSET);
255 	writel(global_ctrl & ~CXL_HDM_DECODER_ENABLE,
256 	       hdm + CXL_HDM_DECODER_CTRL_OFFSET);
257 }
258 
259 static int devm_cxl_enable_hdm(struct device *host, struct cxl_hdm *cxlhdm)
260 {
261 	void __iomem *hdm = cxlhdm->regs.hdm_decoder;
262 	u32 global_ctrl;
263 
264 	global_ctrl = readl(hdm + CXL_HDM_DECODER_CTRL_OFFSET);
265 	writel(global_ctrl | CXL_HDM_DECODER_ENABLE,
266 	       hdm + CXL_HDM_DECODER_CTRL_OFFSET);
267 
268 	return devm_add_action_or_reset(host, disable_hdm, cxlhdm);
269 }
270 
271 static bool __cxl_hdm_decode_init(struct cxl_dev_state *cxlds,
272 				  struct cxl_hdm *cxlhdm,
273 				  struct cxl_endpoint_dvsec_info *info)
274 {
275 	void __iomem *hdm = cxlhdm->regs.hdm_decoder;
276 	struct cxl_port *port = cxlhdm->port;
277 	struct device *dev = cxlds->dev;
278 	struct cxl_port *root;
279 	int i, rc, allowed;
280 	u32 global_ctrl;
281 
282 	global_ctrl = readl(hdm + CXL_HDM_DECODER_CTRL_OFFSET);
283 
284 	/*
285 	 * If the HDM Decoder Capability is already enabled then assume
286 	 * that some other agent like platform firmware set it up.
287 	 */
288 	if (global_ctrl & CXL_HDM_DECODER_ENABLE) {
289 		rc = devm_cxl_enable_mem(&port->dev, cxlds);
290 		if (rc)
291 			return false;
292 		return true;
293 	}
294 
295 	root = to_cxl_port(port->dev.parent);
296 	while (!is_cxl_root(root) && is_cxl_port(root->dev.parent))
297 		root = to_cxl_port(root->dev.parent);
298 	if (!is_cxl_root(root)) {
299 		dev_err(dev, "Failed to acquire root port for HDM enable\n");
300 		return false;
301 	}
302 
303 	for (i = 0, allowed = 0; info->mem_enabled && i < info->ranges; i++) {
304 		struct device *cxld_dev;
305 
306 		cxld_dev = device_find_child(&root->dev, &info->dvsec_range[i],
307 					     dvsec_range_allowed);
308 		if (!cxld_dev) {
309 			dev_dbg(dev, "DVSEC Range%d denied by platform\n", i);
310 			continue;
311 		}
312 		dev_dbg(dev, "DVSEC Range%d allowed by platform\n", i);
313 		put_device(cxld_dev);
314 		allowed++;
315 	}
316 
317 	if (!allowed) {
318 		cxl_set_mem_enable(cxlds, 0);
319 		info->mem_enabled = 0;
320 	}
321 
322 	/*
323 	 * Per CXL 2.0 Section 8.1.3.8.3 and 8.1.3.8.4 DVSEC CXL Range 1 Base
324 	 * [High,Low] when HDM operation is enabled the range register values
325 	 * are ignored by the device, but the spec also recommends matching the
326 	 * DVSEC Range 1,2 to HDM Decoder Range 0,1. So, non-zero info->ranges
327 	 * are expected even though Linux does not require or maintain that
328 	 * match. If at least one DVSEC range is enabled and allowed, skip HDM
329 	 * Decoder Capability Enable.
330 	 */
331 	if (info->mem_enabled)
332 		return false;
333 
334 	rc = devm_cxl_enable_hdm(&port->dev, cxlhdm);
335 	if (rc)
336 		return false;
337 
338 	rc = devm_cxl_enable_mem(&port->dev, cxlds);
339 	if (rc)
340 		return false;
341 
342 	return true;
343 }
344 
345 /**
346  * cxl_hdm_decode_init() - Setup HDM decoding for the endpoint
347  * @cxlds: Device state
348  * @cxlhdm: Mapped HDM decoder Capability
349  *
350  * Try to enable the endpoint's HDM Decoder Capability
351  */
352 int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm)
353 {
354 	struct pci_dev *pdev = to_pci_dev(cxlds->dev);
355 	struct cxl_endpoint_dvsec_info info = { 0 };
356 	int hdm_count, rc, i, ranges = 0;
357 	struct device *dev = &pdev->dev;
358 	int d = cxlds->cxl_dvsec;
359 	u16 cap, ctrl;
360 
361 	if (!d) {
362 		dev_dbg(dev, "No DVSEC Capability\n");
363 		return -ENXIO;
364 	}
365 
366 	rc = pci_read_config_word(pdev, d + CXL_DVSEC_CAP_OFFSET, &cap);
367 	if (rc)
368 		return rc;
369 
370 	rc = pci_read_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, &ctrl);
371 	if (rc)
372 		return rc;
373 
374 	if (!(cap & CXL_DVSEC_MEM_CAPABLE)) {
375 		dev_dbg(dev, "Not MEM Capable\n");
376 		return -ENXIO;
377 	}
378 
379 	/*
380 	 * It is not allowed by spec for MEM.capable to be set and have 0 legacy
381 	 * HDM decoders (values > 2 are also undefined as of CXL 2.0). As this
382 	 * driver is for a spec defined class code which must be CXL.mem
383 	 * capable, there is no point in continuing to enable CXL.mem.
384 	 */
385 	hdm_count = FIELD_GET(CXL_DVSEC_HDM_COUNT_MASK, cap);
386 	if (!hdm_count || hdm_count > 2)
387 		return -EINVAL;
388 
389 	rc = wait_for_valid(cxlds);
390 	if (rc) {
391 		dev_dbg(dev, "Failure awaiting MEM_INFO_VALID (%d)\n", rc);
392 		return rc;
393 	}
394 
395 	/*
396 	 * The current DVSEC values are moot if the memory capability is
397 	 * disabled, and they will remain moot after the HDM Decoder
398 	 * capability is enabled.
399 	 */
400 	info.mem_enabled = FIELD_GET(CXL_DVSEC_MEM_ENABLE, ctrl);
401 	if (!info.mem_enabled)
402 		goto hdm_init;
403 
404 	for (i = 0; i < hdm_count; i++) {
405 		u64 base, size;
406 		u32 temp;
407 
408 		rc = pci_read_config_dword(
409 			pdev, d + CXL_DVSEC_RANGE_SIZE_HIGH(i), &temp);
410 		if (rc)
411 			return rc;
412 
413 		size = (u64)temp << 32;
414 
415 		rc = pci_read_config_dword(
416 			pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(i), &temp);
417 		if (rc)
418 			return rc;
419 
420 		size |= temp & CXL_DVSEC_MEM_SIZE_LOW_MASK;
421 
422 		rc = pci_read_config_dword(
423 			pdev, d + CXL_DVSEC_RANGE_BASE_HIGH(i), &temp);
424 		if (rc)
425 			return rc;
426 
427 		base = (u64)temp << 32;
428 
429 		rc = pci_read_config_dword(
430 			pdev, d + CXL_DVSEC_RANGE_BASE_LOW(i), &temp);
431 		if (rc)
432 			return rc;
433 
434 		base |= temp & CXL_DVSEC_MEM_BASE_LOW_MASK;
435 
436 		info.dvsec_range[i] = (struct range) {
437 			.start = base,
438 			.end = base + size - 1
439 		};
440 
441 		if (size)
442 			ranges++;
443 	}
444 
445 	info.ranges = ranges;
446 
447 	/*
448 	 * If DVSEC ranges are being used instead of HDM decoder registers there
449 	 * is no use in trying to manage those.
450 	 */
451 hdm_init:
452 	if (!__cxl_hdm_decode_init(cxlds, cxlhdm, &info)) {
453 		dev_err(dev,
454 			"Legacy range registers configuration prevents HDM operation.\n");
455 		return -EBUSY;
456 	}
457 
458 	return 0;
459 }
460 EXPORT_SYMBOL_NS_GPL(cxl_hdm_decode_init, CXL);
461