1 // SPDX-License-Identifier: GPL-2.0-only 2 /** 3 * Routines supporting the Power 7+ Nest Accelerators driver 4 * 5 * Copyright (C) 2011-2012 International Business Machines Inc. 6 * 7 * Author: Kent Yoder <yoder1@us.ibm.com> 8 */ 9 10 #include <crypto/internal/aead.h> 11 #include <crypto/internal/hash.h> 12 #include <crypto/aes.h> 13 #include <crypto/sha2.h> 14 #include <crypto/algapi.h> 15 #include <crypto/scatterwalk.h> 16 #include <linux/module.h> 17 #include <linux/moduleparam.h> 18 #include <linux/types.h> 19 #include <linux/mm.h> 20 #include <linux/scatterlist.h> 21 #include <linux/device.h> 22 #include <linux/of.h> 23 #include <asm/hvcall.h> 24 #include <asm/vio.h> 25 26 #include "nx_csbcpb.h" 27 #include "nx.h" 28 29 30 /** 31 * nx_hcall_sync - make an H_COP_OP hcall for the passed in op structure 32 * 33 * @nx_ctx: the crypto context handle 34 * @op: PFO operation struct to pass in 35 * @may_sleep: flag indicating the request can sleep 36 * 37 * Make the hcall, retrying while the hardware is busy. If we cannot yield 38 * the thread, limit the number of retries to 10 here. 39 */ 40 int nx_hcall_sync(struct nx_crypto_ctx *nx_ctx, 41 struct vio_pfo_op *op, 42 u32 may_sleep) 43 { 44 int rc, retries = 10; 45 struct vio_dev *viodev = nx_driver.viodev; 46 47 atomic_inc(&(nx_ctx->stats->sync_ops)); 48 49 do { 50 rc = vio_h_cop_sync(viodev, op); 51 } while (rc == -EBUSY && !may_sleep && retries--); 52 53 if (rc) { 54 dev_dbg(&viodev->dev, "vio_h_cop_sync failed: rc: %d " 55 "hcall rc: %ld\n", rc, op->hcall_err); 56 atomic_inc(&(nx_ctx->stats->errors)); 57 atomic_set(&(nx_ctx->stats->last_error), op->hcall_err); 58 atomic_set(&(nx_ctx->stats->last_error_pid), current->pid); 59 } 60 61 return rc; 62 } 63 64 /** 65 * nx_build_sg_list - build an NX scatter list describing a single buffer 66 * 67 * @sg_head: pointer to the first scatter list element to build 68 * @start_addr: pointer to the linear buffer 69 * @len: length of the data at @start_addr 70 * @sgmax: the largest number of scatter list elements we're allowed to create 71 * 72 * This function will start writing nx_sg elements at @sg_head and keep 73 * writing them until all of the data from @start_addr is described or 74 * until sgmax elements have been written. Scatter list elements will be 75 * created such that none of the elements describes a buffer that crosses a 4K 76 * boundary. 77 */ 78 struct nx_sg *nx_build_sg_list(struct nx_sg *sg_head, 79 u8 *start_addr, 80 unsigned int *len, 81 u32 sgmax) 82 { 83 unsigned int sg_len = 0; 84 struct nx_sg *sg; 85 u64 sg_addr = (u64)start_addr; 86 u64 end_addr; 87 88 /* determine the start and end for this address range - slightly 89 * different if this is in VMALLOC_REGION */ 90 if (is_vmalloc_addr(start_addr)) 91 sg_addr = page_to_phys(vmalloc_to_page(start_addr)) 92 + offset_in_page(sg_addr); 93 else 94 sg_addr = __pa(sg_addr); 95 96 end_addr = sg_addr + *len; 97 98 /* each iteration will write one struct nx_sg element and add the 99 * length of data described by that element to sg_len. Once @len bytes 100 * have been described (or @sgmax elements have been written), the 101 * loop ends. min_t is used to ensure @end_addr falls on the same page 102 * as sg_addr, if not, we need to create another nx_sg element for the 103 * data on the next page. 104 * 105 * Also when using vmalloc'ed data, every time that a system page 106 * boundary is crossed the physical address needs to be re-calculated. 107 */ 108 for (sg = sg_head; sg_len < *len; sg++) { 109 u64 next_page; 110 111 sg->addr = sg_addr; 112 sg_addr = min_t(u64, NX_PAGE_NUM(sg_addr + NX_PAGE_SIZE), 113 end_addr); 114 115 next_page = (sg->addr & PAGE_MASK) + PAGE_SIZE; 116 sg->len = min_t(u64, sg_addr, next_page) - sg->addr; 117 sg_len += sg->len; 118 119 if (sg_addr >= next_page && 120 is_vmalloc_addr(start_addr + sg_len)) { 121 sg_addr = page_to_phys(vmalloc_to_page( 122 start_addr + sg_len)); 123 end_addr = sg_addr + *len - sg_len; 124 } 125 126 if ((sg - sg_head) == sgmax) { 127 pr_err("nx: scatter/gather list overflow, pid: %d\n", 128 current->pid); 129 sg++; 130 break; 131 } 132 } 133 *len = sg_len; 134 135 /* return the moved sg_head pointer */ 136 return sg; 137 } 138 139 /** 140 * nx_walk_and_build - walk a linux scatterlist and build an nx scatterlist 141 * 142 * @nx_dst: pointer to the first nx_sg element to write 143 * @sglen: max number of nx_sg entries we're allowed to write 144 * @sg_src: pointer to the source linux scatterlist to walk 145 * @start: number of bytes to fast-forward past at the beginning of @sg_src 146 * @src_len: number of bytes to walk in @sg_src 147 */ 148 struct nx_sg *nx_walk_and_build(struct nx_sg *nx_dst, 149 unsigned int sglen, 150 struct scatterlist *sg_src, 151 unsigned int start, 152 unsigned int *src_len) 153 { 154 struct scatter_walk walk; 155 struct nx_sg *nx_sg = nx_dst; 156 unsigned int n, offset = 0, len = *src_len; 157 char *dst; 158 159 /* we need to fast forward through @start bytes first */ 160 for (;;) { 161 scatterwalk_start(&walk, sg_src); 162 163 if (start < offset + sg_src->length) 164 break; 165 166 offset += sg_src->length; 167 sg_src = sg_next(sg_src); 168 } 169 170 /* start - offset is the number of bytes to advance in the scatterlist 171 * element we're currently looking at */ 172 scatterwalk_advance(&walk, start - offset); 173 174 while (len && (nx_sg - nx_dst) < sglen) { 175 n = scatterwalk_clamp(&walk, len); 176 if (!n) { 177 /* In cases where we have scatterlist chain sg_next 178 * handles with it properly */ 179 scatterwalk_start(&walk, sg_next(walk.sg)); 180 n = scatterwalk_clamp(&walk, len); 181 } 182 dst = scatterwalk_map(&walk); 183 184 nx_sg = nx_build_sg_list(nx_sg, dst, &n, sglen - (nx_sg - nx_dst)); 185 len -= n; 186 187 scatterwalk_unmap(dst); 188 scatterwalk_advance(&walk, n); 189 scatterwalk_done(&walk, SCATTERWALK_FROM_SG, len); 190 } 191 /* update to_process */ 192 *src_len -= len; 193 194 /* return the moved destination pointer */ 195 return nx_sg; 196 } 197 198 /** 199 * trim_sg_list - ensures the bound in sg list. 200 * @sg: sg list head 201 * @end: sg lisg end 202 * @delta: is the amount we need to crop in order to bound the list. 203 * 204 */ 205 static long int trim_sg_list(struct nx_sg *sg, 206 struct nx_sg *end, 207 unsigned int delta, 208 unsigned int *nbytes) 209 { 210 long int oplen; 211 long int data_back; 212 unsigned int is_delta = delta; 213 214 while (delta && end > sg) { 215 struct nx_sg *last = end - 1; 216 217 if (last->len > delta) { 218 last->len -= delta; 219 delta = 0; 220 } else { 221 end--; 222 delta -= last->len; 223 } 224 } 225 226 /* There are cases where we need to crop list in order to make it 227 * a block size multiple, but we also need to align data. In order to 228 * that we need to calculate how much we need to put back to be 229 * processed 230 */ 231 oplen = (sg - end) * sizeof(struct nx_sg); 232 if (is_delta) { 233 data_back = (abs(oplen) / AES_BLOCK_SIZE) * sg->len; 234 data_back = *nbytes - (data_back & ~(AES_BLOCK_SIZE - 1)); 235 *nbytes -= data_back; 236 } 237 238 return oplen; 239 } 240 241 /** 242 * nx_build_sg_lists - walk the input scatterlists and build arrays of NX 243 * scatterlists based on them. 244 * 245 * @nx_ctx: NX crypto context for the lists we're building 246 * @iv: iv data, if the algorithm requires it 247 * @dst: destination scatterlist 248 * @src: source scatterlist 249 * @nbytes: length of data described in the scatterlists 250 * @offset: number of bytes to fast-forward past at the beginning of 251 * scatterlists. 252 * @oiv: destination for the iv data, if the algorithm requires it 253 * 254 * This is common code shared by all the AES algorithms. It uses the crypto 255 * scatterlist walk routines to traverse input and output scatterlists, building 256 * corresponding NX scatterlists 257 */ 258 int nx_build_sg_lists(struct nx_crypto_ctx *nx_ctx, 259 const u8 *iv, 260 struct scatterlist *dst, 261 struct scatterlist *src, 262 unsigned int *nbytes, 263 unsigned int offset, 264 u8 *oiv) 265 { 266 unsigned int delta = 0; 267 unsigned int total = *nbytes; 268 struct nx_sg *nx_insg = nx_ctx->in_sg; 269 struct nx_sg *nx_outsg = nx_ctx->out_sg; 270 unsigned int max_sg_len; 271 272 max_sg_len = min_t(u64, nx_ctx->ap->sglen, 273 nx_driver.of.max_sg_len/sizeof(struct nx_sg)); 274 max_sg_len = min_t(u64, max_sg_len, 275 nx_ctx->ap->databytelen/NX_PAGE_SIZE); 276 277 if (oiv) 278 memcpy(oiv, iv, AES_BLOCK_SIZE); 279 280 *nbytes = min_t(u64, *nbytes, nx_ctx->ap->databytelen); 281 282 nx_outsg = nx_walk_and_build(nx_outsg, max_sg_len, dst, 283 offset, nbytes); 284 nx_insg = nx_walk_and_build(nx_insg, max_sg_len, src, 285 offset, nbytes); 286 287 if (*nbytes < total) 288 delta = *nbytes - (*nbytes & ~(AES_BLOCK_SIZE - 1)); 289 290 /* these lengths should be negative, which will indicate to phyp that 291 * the input and output parameters are scatterlists, not linear 292 * buffers */ 293 nx_ctx->op.inlen = trim_sg_list(nx_ctx->in_sg, nx_insg, delta, nbytes); 294 nx_ctx->op.outlen = trim_sg_list(nx_ctx->out_sg, nx_outsg, delta, nbytes); 295 296 return 0; 297 } 298 299 /** 300 * nx_ctx_init - initialize an nx_ctx's vio_pfo_op struct 301 * 302 * @nx_ctx: the nx context to initialize 303 * @function: the function code for the op 304 */ 305 void nx_ctx_init(struct nx_crypto_ctx *nx_ctx, unsigned int function) 306 { 307 spin_lock_init(&nx_ctx->lock); 308 memset(nx_ctx->kmem, 0, nx_ctx->kmem_len); 309 nx_ctx->csbcpb->csb.valid |= NX_CSB_VALID_BIT; 310 311 nx_ctx->op.flags = function; 312 nx_ctx->op.csbcpb = __pa(nx_ctx->csbcpb); 313 nx_ctx->op.in = __pa(nx_ctx->in_sg); 314 nx_ctx->op.out = __pa(nx_ctx->out_sg); 315 316 if (nx_ctx->csbcpb_aead) { 317 nx_ctx->csbcpb_aead->csb.valid |= NX_CSB_VALID_BIT; 318 319 nx_ctx->op_aead.flags = function; 320 nx_ctx->op_aead.csbcpb = __pa(nx_ctx->csbcpb_aead); 321 nx_ctx->op_aead.in = __pa(nx_ctx->in_sg); 322 nx_ctx->op_aead.out = __pa(nx_ctx->out_sg); 323 } 324 } 325 326 static void nx_of_update_status(struct device *dev, 327 struct property *p, 328 struct nx_of *props) 329 { 330 if (!strncmp(p->value, "okay", p->length)) { 331 props->status = NX_WAITING; 332 props->flags |= NX_OF_FLAG_STATUS_SET; 333 } else { 334 dev_info(dev, "%s: status '%s' is not 'okay'\n", __func__, 335 (char *)p->value); 336 } 337 } 338 339 static void nx_of_update_sglen(struct device *dev, 340 struct property *p, 341 struct nx_of *props) 342 { 343 if (p->length != sizeof(props->max_sg_len)) { 344 dev_err(dev, "%s: unexpected format for " 345 "ibm,max-sg-len property\n", __func__); 346 dev_dbg(dev, "%s: ibm,max-sg-len is %d bytes " 347 "long, expected %zd bytes\n", __func__, 348 p->length, sizeof(props->max_sg_len)); 349 return; 350 } 351 352 props->max_sg_len = *(u32 *)p->value; 353 props->flags |= NX_OF_FLAG_MAXSGLEN_SET; 354 } 355 356 static void nx_of_update_msc(struct device *dev, 357 struct property *p, 358 struct nx_of *props) 359 { 360 struct msc_triplet *trip; 361 struct max_sync_cop *msc; 362 unsigned int bytes_so_far, i, lenp; 363 364 msc = (struct max_sync_cop *)p->value; 365 lenp = p->length; 366 367 /* You can't tell if the data read in for this property is sane by its 368 * size alone. This is because there are sizes embedded in the data 369 * structure. The best we can do is check lengths as we parse and bail 370 * as soon as a length error is detected. */ 371 bytes_so_far = 0; 372 373 while ((bytes_so_far + sizeof(struct max_sync_cop)) <= lenp) { 374 bytes_so_far += sizeof(struct max_sync_cop); 375 376 trip = msc->trip; 377 378 for (i = 0; 379 ((bytes_so_far + sizeof(struct msc_triplet)) <= lenp) && 380 i < msc->triplets; 381 i++) { 382 if (msc->fc >= NX_MAX_FC || msc->mode >= NX_MAX_MODE) { 383 dev_err(dev, "unknown function code/mode " 384 "combo: %d/%d (ignored)\n", msc->fc, 385 msc->mode); 386 goto next_loop; 387 } 388 389 if (!trip->sglen || trip->databytelen < NX_PAGE_SIZE) { 390 dev_warn(dev, "bogus sglen/databytelen: " 391 "%u/%u (ignored)\n", trip->sglen, 392 trip->databytelen); 393 goto next_loop; 394 } 395 396 switch (trip->keybitlen) { 397 case 128: 398 case 160: 399 props->ap[msc->fc][msc->mode][0].databytelen = 400 trip->databytelen; 401 props->ap[msc->fc][msc->mode][0].sglen = 402 trip->sglen; 403 break; 404 case 192: 405 props->ap[msc->fc][msc->mode][1].databytelen = 406 trip->databytelen; 407 props->ap[msc->fc][msc->mode][1].sglen = 408 trip->sglen; 409 break; 410 case 256: 411 if (msc->fc == NX_FC_AES) { 412 props->ap[msc->fc][msc->mode][2]. 413 databytelen = trip->databytelen; 414 props->ap[msc->fc][msc->mode][2].sglen = 415 trip->sglen; 416 } else if (msc->fc == NX_FC_AES_HMAC || 417 msc->fc == NX_FC_SHA) { 418 props->ap[msc->fc][msc->mode][1]. 419 databytelen = trip->databytelen; 420 props->ap[msc->fc][msc->mode][1].sglen = 421 trip->sglen; 422 } else { 423 dev_warn(dev, "unknown function " 424 "code/key bit len combo" 425 ": (%u/256)\n", msc->fc); 426 } 427 break; 428 case 512: 429 props->ap[msc->fc][msc->mode][2].databytelen = 430 trip->databytelen; 431 props->ap[msc->fc][msc->mode][2].sglen = 432 trip->sglen; 433 break; 434 default: 435 dev_warn(dev, "unknown function code/key bit " 436 "len combo: (%u/%u)\n", msc->fc, 437 trip->keybitlen); 438 break; 439 } 440 next_loop: 441 bytes_so_far += sizeof(struct msc_triplet); 442 trip++; 443 } 444 445 msc = (struct max_sync_cop *)trip; 446 } 447 448 props->flags |= NX_OF_FLAG_MAXSYNCCOP_SET; 449 } 450 451 /** 452 * nx_of_init - read openFirmware values from the device tree 453 * 454 * @dev: device handle 455 * @props: pointer to struct to hold the properties values 456 * 457 * Called once at driver probe time, this function will read out the 458 * openFirmware properties we use at runtime. If all the OF properties are 459 * acceptable, when we exit this function props->flags will indicate that 460 * we're ready to register our crypto algorithms. 461 */ 462 static void nx_of_init(struct device *dev, struct nx_of *props) 463 { 464 struct device_node *base_node = dev->of_node; 465 struct property *p; 466 467 p = of_find_property(base_node, "status", NULL); 468 if (!p) 469 dev_info(dev, "%s: property 'status' not found\n", __func__); 470 else 471 nx_of_update_status(dev, p, props); 472 473 p = of_find_property(base_node, "ibm,max-sg-len", NULL); 474 if (!p) 475 dev_info(dev, "%s: property 'ibm,max-sg-len' not found\n", 476 __func__); 477 else 478 nx_of_update_sglen(dev, p, props); 479 480 p = of_find_property(base_node, "ibm,max-sync-cop", NULL); 481 if (!p) 482 dev_info(dev, "%s: property 'ibm,max-sync-cop' not found\n", 483 __func__); 484 else 485 nx_of_update_msc(dev, p, props); 486 } 487 488 static bool nx_check_prop(struct device *dev, u32 fc, u32 mode, int slot) 489 { 490 struct alg_props *props = &nx_driver.of.ap[fc][mode][slot]; 491 492 if (!props->sglen || props->databytelen < NX_PAGE_SIZE) { 493 if (dev) 494 dev_warn(dev, "bogus sglen/databytelen for %u/%u/%u: " 495 "%u/%u (ignored)\n", fc, mode, slot, 496 props->sglen, props->databytelen); 497 return false; 498 } 499 500 return true; 501 } 502 503 static bool nx_check_props(struct device *dev, u32 fc, u32 mode) 504 { 505 int i; 506 507 for (i = 0; i < 3; i++) 508 if (!nx_check_prop(dev, fc, mode, i)) 509 return false; 510 511 return true; 512 } 513 514 static int nx_register_skcipher(struct skcipher_alg *alg, u32 fc, u32 mode) 515 { 516 return nx_check_props(&nx_driver.viodev->dev, fc, mode) ? 517 crypto_register_skcipher(alg) : 0; 518 } 519 520 static int nx_register_aead(struct aead_alg *alg, u32 fc, u32 mode) 521 { 522 return nx_check_props(&nx_driver.viodev->dev, fc, mode) ? 523 crypto_register_aead(alg) : 0; 524 } 525 526 static int nx_register_shash(struct shash_alg *alg, u32 fc, u32 mode, int slot) 527 { 528 return (slot >= 0 ? nx_check_prop(&nx_driver.viodev->dev, 529 fc, mode, slot) : 530 nx_check_props(&nx_driver.viodev->dev, fc, mode)) ? 531 crypto_register_shash(alg) : 0; 532 } 533 534 static void nx_unregister_skcipher(struct skcipher_alg *alg, u32 fc, u32 mode) 535 { 536 if (nx_check_props(NULL, fc, mode)) 537 crypto_unregister_skcipher(alg); 538 } 539 540 static void nx_unregister_aead(struct aead_alg *alg, u32 fc, u32 mode) 541 { 542 if (nx_check_props(NULL, fc, mode)) 543 crypto_unregister_aead(alg); 544 } 545 546 static void nx_unregister_shash(struct shash_alg *alg, u32 fc, u32 mode, 547 int slot) 548 { 549 if (slot >= 0 ? nx_check_prop(NULL, fc, mode, slot) : 550 nx_check_props(NULL, fc, mode)) 551 crypto_unregister_shash(alg); 552 } 553 554 /** 555 * nx_register_algs - register algorithms with the crypto API 556 * 557 * Called from nx_probe() 558 * 559 * If all OF properties are in an acceptable state, the driver flags will 560 * indicate that we're ready and we'll create our debugfs files and register 561 * out crypto algorithms. 562 */ 563 static int nx_register_algs(void) 564 { 565 int rc = -1; 566 567 if (nx_driver.of.flags != NX_OF_FLAG_MASK_READY) 568 goto out; 569 570 memset(&nx_driver.stats, 0, sizeof(struct nx_stats)); 571 572 NX_DEBUGFS_INIT(&nx_driver); 573 574 nx_driver.of.status = NX_OKAY; 575 576 rc = nx_register_skcipher(&nx_ecb_aes_alg, NX_FC_AES, NX_MODE_AES_ECB); 577 if (rc) 578 goto out; 579 580 rc = nx_register_skcipher(&nx_cbc_aes_alg, NX_FC_AES, NX_MODE_AES_CBC); 581 if (rc) 582 goto out_unreg_ecb; 583 584 rc = nx_register_skcipher(&nx_ctr3686_aes_alg, NX_FC_AES, 585 NX_MODE_AES_CTR); 586 if (rc) 587 goto out_unreg_cbc; 588 589 rc = nx_register_aead(&nx_gcm_aes_alg, NX_FC_AES, NX_MODE_AES_GCM); 590 if (rc) 591 goto out_unreg_ctr3686; 592 593 rc = nx_register_aead(&nx_gcm4106_aes_alg, NX_FC_AES, NX_MODE_AES_GCM); 594 if (rc) 595 goto out_unreg_gcm; 596 597 rc = nx_register_aead(&nx_ccm_aes_alg, NX_FC_AES, NX_MODE_AES_CCM); 598 if (rc) 599 goto out_unreg_gcm4106; 600 601 rc = nx_register_aead(&nx_ccm4309_aes_alg, NX_FC_AES, NX_MODE_AES_CCM); 602 if (rc) 603 goto out_unreg_ccm; 604 605 rc = nx_register_shash(&nx_shash_sha256_alg, NX_FC_SHA, NX_MODE_SHA, 606 NX_PROPS_SHA256); 607 if (rc) 608 goto out_unreg_ccm4309; 609 610 rc = nx_register_shash(&nx_shash_sha512_alg, NX_FC_SHA, NX_MODE_SHA, 611 NX_PROPS_SHA512); 612 if (rc) 613 goto out_unreg_s256; 614 615 rc = nx_register_shash(&nx_shash_aes_xcbc_alg, 616 NX_FC_AES, NX_MODE_AES_XCBC_MAC, -1); 617 if (rc) 618 goto out_unreg_s512; 619 620 goto out; 621 622 out_unreg_s512: 623 nx_unregister_shash(&nx_shash_sha512_alg, NX_FC_SHA, NX_MODE_SHA, 624 NX_PROPS_SHA512); 625 out_unreg_s256: 626 nx_unregister_shash(&nx_shash_sha256_alg, NX_FC_SHA, NX_MODE_SHA, 627 NX_PROPS_SHA256); 628 out_unreg_ccm4309: 629 nx_unregister_aead(&nx_ccm4309_aes_alg, NX_FC_AES, NX_MODE_AES_CCM); 630 out_unreg_ccm: 631 nx_unregister_aead(&nx_ccm_aes_alg, NX_FC_AES, NX_MODE_AES_CCM); 632 out_unreg_gcm4106: 633 nx_unregister_aead(&nx_gcm4106_aes_alg, NX_FC_AES, NX_MODE_AES_GCM); 634 out_unreg_gcm: 635 nx_unregister_aead(&nx_gcm_aes_alg, NX_FC_AES, NX_MODE_AES_GCM); 636 out_unreg_ctr3686: 637 nx_unregister_skcipher(&nx_ctr3686_aes_alg, NX_FC_AES, NX_MODE_AES_CTR); 638 out_unreg_cbc: 639 nx_unregister_skcipher(&nx_cbc_aes_alg, NX_FC_AES, NX_MODE_AES_CBC); 640 out_unreg_ecb: 641 nx_unregister_skcipher(&nx_ecb_aes_alg, NX_FC_AES, NX_MODE_AES_ECB); 642 out: 643 return rc; 644 } 645 646 /** 647 * nx_crypto_ctx_init - create and initialize a crypto api context 648 * 649 * @nx_ctx: the crypto api context 650 * @fc: function code for the context 651 * @mode: the function code specific mode for this context 652 */ 653 static int nx_crypto_ctx_init(struct nx_crypto_ctx *nx_ctx, u32 fc, u32 mode) 654 { 655 if (nx_driver.of.status != NX_OKAY) { 656 pr_err("Attempt to initialize NX crypto context while device " 657 "is not available!\n"); 658 return -ENODEV; 659 } 660 661 /* we need an extra page for csbcpb_aead for these modes */ 662 if (mode == NX_MODE_AES_GCM || mode == NX_MODE_AES_CCM) 663 nx_ctx->kmem_len = (5 * NX_PAGE_SIZE) + 664 sizeof(struct nx_csbcpb); 665 else 666 nx_ctx->kmem_len = (4 * NX_PAGE_SIZE) + 667 sizeof(struct nx_csbcpb); 668 669 nx_ctx->kmem = kmalloc(nx_ctx->kmem_len, GFP_KERNEL); 670 if (!nx_ctx->kmem) 671 return -ENOMEM; 672 673 /* the csbcpb and scatterlists must be 4K aligned pages */ 674 nx_ctx->csbcpb = (struct nx_csbcpb *)(round_up((u64)nx_ctx->kmem, 675 (u64)NX_PAGE_SIZE)); 676 nx_ctx->in_sg = (struct nx_sg *)((u8 *)nx_ctx->csbcpb + NX_PAGE_SIZE); 677 nx_ctx->out_sg = (struct nx_sg *)((u8 *)nx_ctx->in_sg + NX_PAGE_SIZE); 678 679 if (mode == NX_MODE_AES_GCM || mode == NX_MODE_AES_CCM) 680 nx_ctx->csbcpb_aead = 681 (struct nx_csbcpb *)((u8 *)nx_ctx->out_sg + 682 NX_PAGE_SIZE); 683 684 /* give each context a pointer to global stats and their OF 685 * properties */ 686 nx_ctx->stats = &nx_driver.stats; 687 memcpy(nx_ctx->props, nx_driver.of.ap[fc][mode], 688 sizeof(struct alg_props) * 3); 689 690 return 0; 691 } 692 693 /* entry points from the crypto tfm initializers */ 694 int nx_crypto_ctx_aes_ccm_init(struct crypto_aead *tfm) 695 { 696 crypto_aead_set_reqsize(tfm, sizeof(struct nx_ccm_rctx)); 697 return nx_crypto_ctx_init(crypto_aead_ctx(tfm), NX_FC_AES, 698 NX_MODE_AES_CCM); 699 } 700 701 int nx_crypto_ctx_aes_gcm_init(struct crypto_aead *tfm) 702 { 703 crypto_aead_set_reqsize(tfm, sizeof(struct nx_gcm_rctx)); 704 return nx_crypto_ctx_init(crypto_aead_ctx(tfm), NX_FC_AES, 705 NX_MODE_AES_GCM); 706 } 707 708 int nx_crypto_ctx_aes_ctr_init(struct crypto_skcipher *tfm) 709 { 710 return nx_crypto_ctx_init(crypto_skcipher_ctx(tfm), NX_FC_AES, 711 NX_MODE_AES_CTR); 712 } 713 714 int nx_crypto_ctx_aes_cbc_init(struct crypto_skcipher *tfm) 715 { 716 return nx_crypto_ctx_init(crypto_skcipher_ctx(tfm), NX_FC_AES, 717 NX_MODE_AES_CBC); 718 } 719 720 int nx_crypto_ctx_aes_ecb_init(struct crypto_skcipher *tfm) 721 { 722 return nx_crypto_ctx_init(crypto_skcipher_ctx(tfm), NX_FC_AES, 723 NX_MODE_AES_ECB); 724 } 725 726 int nx_crypto_ctx_sha_init(struct crypto_tfm *tfm) 727 { 728 return nx_crypto_ctx_init(crypto_tfm_ctx(tfm), NX_FC_SHA, NX_MODE_SHA); 729 } 730 731 int nx_crypto_ctx_aes_xcbc_init(struct crypto_tfm *tfm) 732 { 733 return nx_crypto_ctx_init(crypto_tfm_ctx(tfm), NX_FC_AES, 734 NX_MODE_AES_XCBC_MAC); 735 } 736 737 /** 738 * nx_crypto_ctx_exit - destroy a crypto api context 739 * 740 * @tfm: the crypto transform pointer for the context 741 * 742 * As crypto API contexts are destroyed, this exit hook is called to free the 743 * memory associated with it. 744 */ 745 void nx_crypto_ctx_exit(struct crypto_tfm *tfm) 746 { 747 struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(tfm); 748 749 kfree_sensitive(nx_ctx->kmem); 750 nx_ctx->csbcpb = NULL; 751 nx_ctx->csbcpb_aead = NULL; 752 nx_ctx->in_sg = NULL; 753 nx_ctx->out_sg = NULL; 754 } 755 756 void nx_crypto_ctx_skcipher_exit(struct crypto_skcipher *tfm) 757 { 758 nx_crypto_ctx_exit(crypto_skcipher_ctx(tfm)); 759 } 760 761 void nx_crypto_ctx_aead_exit(struct crypto_aead *tfm) 762 { 763 struct nx_crypto_ctx *nx_ctx = crypto_aead_ctx(tfm); 764 765 kfree_sensitive(nx_ctx->kmem); 766 } 767 768 static int nx_probe(struct vio_dev *viodev, const struct vio_device_id *id) 769 { 770 dev_dbg(&viodev->dev, "driver probed: %s resource id: 0x%x\n", 771 viodev->name, viodev->resource_id); 772 773 if (nx_driver.viodev) { 774 dev_err(&viodev->dev, "%s: Attempt to register more than one " 775 "instance of the hardware\n", __func__); 776 return -EINVAL; 777 } 778 779 nx_driver.viodev = viodev; 780 781 nx_of_init(&viodev->dev, &nx_driver.of); 782 783 return nx_register_algs(); 784 } 785 786 static int nx_remove(struct vio_dev *viodev) 787 { 788 dev_dbg(&viodev->dev, "entering nx_remove for UA 0x%x\n", 789 viodev->unit_address); 790 791 if (nx_driver.of.status == NX_OKAY) { 792 NX_DEBUGFS_FINI(&nx_driver); 793 794 nx_unregister_shash(&nx_shash_aes_xcbc_alg, 795 NX_FC_AES, NX_MODE_AES_XCBC_MAC, -1); 796 nx_unregister_shash(&nx_shash_sha512_alg, 797 NX_FC_SHA, NX_MODE_SHA, NX_PROPS_SHA256); 798 nx_unregister_shash(&nx_shash_sha256_alg, 799 NX_FC_SHA, NX_MODE_SHA, NX_PROPS_SHA512); 800 nx_unregister_aead(&nx_ccm4309_aes_alg, 801 NX_FC_AES, NX_MODE_AES_CCM); 802 nx_unregister_aead(&nx_ccm_aes_alg, NX_FC_AES, NX_MODE_AES_CCM); 803 nx_unregister_aead(&nx_gcm4106_aes_alg, 804 NX_FC_AES, NX_MODE_AES_GCM); 805 nx_unregister_aead(&nx_gcm_aes_alg, 806 NX_FC_AES, NX_MODE_AES_GCM); 807 nx_unregister_skcipher(&nx_ctr3686_aes_alg, 808 NX_FC_AES, NX_MODE_AES_CTR); 809 nx_unregister_skcipher(&nx_cbc_aes_alg, NX_FC_AES, 810 NX_MODE_AES_CBC); 811 nx_unregister_skcipher(&nx_ecb_aes_alg, NX_FC_AES, 812 NX_MODE_AES_ECB); 813 } 814 815 return 0; 816 } 817 818 819 /* module wide initialization/cleanup */ 820 static int __init nx_init(void) 821 { 822 return vio_register_driver(&nx_driver.viodriver); 823 } 824 825 static void __exit nx_fini(void) 826 { 827 vio_unregister_driver(&nx_driver.viodriver); 828 } 829 830 static const struct vio_device_id nx_crypto_driver_ids[] = { 831 { "ibm,sym-encryption-v1", "ibm,sym-encryption" }, 832 { "", "" } 833 }; 834 MODULE_DEVICE_TABLE(vio, nx_crypto_driver_ids); 835 836 /* driver state structure */ 837 struct nx_crypto_driver nx_driver = { 838 .viodriver = { 839 .id_table = nx_crypto_driver_ids, 840 .probe = nx_probe, 841 .remove = nx_remove, 842 .name = NX_NAME, 843 }, 844 }; 845 846 module_init(nx_init); 847 module_exit(nx_fini); 848 849 MODULE_AUTHOR("Kent Yoder <yoder1@us.ibm.com>"); 850 MODULE_DESCRIPTION(NX_STRING); 851 MODULE_LICENSE("GPL"); 852 MODULE_VERSION(NX_VERSION); 853