xref: /openbmc/linux/drivers/crypto/caam/dpseci.h (revision da1d9caf)
1 /* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
2 /*
3  * Copyright 2013-2016 Freescale Semiconductor Inc.
4  * Copyright 2017-2018 NXP
5  */
6 #ifndef _DPSECI_H_
7 #define _DPSECI_H_
8 
9 /*
10  * Data Path SEC Interface API
11  * Contains initialization APIs and runtime control APIs for DPSECI
12  */
13 
14 struct fsl_mc_io;
15 
16 /**
17  * General DPSECI macros
18  */
19 
20 /**
21  * Maximum number of Tx/Rx queues per DPSECI object
22  */
23 #define DPSECI_MAX_QUEUE_NUM		16
24 
25 /**
26  * All queues considered; see dpseci_set_rx_queue()
27  */
28 #define DPSECI_ALL_QUEUES	(u8)(-1)
29 
30 int dpseci_open(struct fsl_mc_io *mc_io, u32 cmd_flags, int dpseci_id,
31 		u16 *token);
32 
33 int dpseci_close(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
34 
35 /**
36  * Enable the Congestion Group support
37  */
38 #define DPSECI_OPT_HAS_CG		0x000020
39 
40 /**
41  * struct dpseci_cfg - Structure representing DPSECI configuration
42  * @options: Any combination of the following flags:
43  *		DPSECI_OPT_HAS_CG
44  * @num_tx_queues: num of queues towards the SEC
45  * @num_rx_queues: num of queues back from the SEC
46  * @priorities: Priorities for the SEC hardware processing;
47  *		each place in the array is the priority of the tx queue
48  *		towards the SEC;
49  *		valid priorities are configured with values 1-8;
50  */
51 struct dpseci_cfg {
52 	u32 options;
53 	u8 num_tx_queues;
54 	u8 num_rx_queues;
55 	u8 priorities[DPSECI_MAX_QUEUE_NUM];
56 };
57 
58 int dpseci_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
59 
60 int dpseci_disable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
61 
62 int dpseci_reset(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
63 
64 int dpseci_is_enabled(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
65 		      int *en);
66 
67 /**
68  * struct dpseci_attr - Structure representing DPSECI attributes
69  * @id: DPSECI object ID
70  * @num_tx_queues: number of queues towards the SEC
71  * @num_rx_queues: number of queues back from the SEC
72  * @options: any combination of the following flags:
73  *		DPSECI_OPT_HAS_CG
74  */
75 struct dpseci_attr {
76 	int id;
77 	u8 num_tx_queues;
78 	u8 num_rx_queues;
79 	u32 options;
80 };
81 
82 int dpseci_get_attributes(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
83 			  struct dpseci_attr *attr);
84 
85 /**
86  * enum dpseci_dest - DPSECI destination types
87  * @DPSECI_DEST_NONE: Unassigned destination; The queue is set in parked mode
88  *	and does not generate FQDAN notifications; user is expected to dequeue
89  *	from the queue based on polling or other user-defined method
90  * @DPSECI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN
91  *	notifications to the specified DPIO; user is expected to dequeue from
92  *	the queue only after notification is received
93  * @DPSECI_DEST_DPCON: The queue is set in schedule mode and does not generate
94  *	FQDAN notifications, but is connected to the specified DPCON object;
95  *	user is expected to dequeue from the DPCON channel
96  */
97 enum dpseci_dest {
98 	DPSECI_DEST_NONE = 0,
99 	DPSECI_DEST_DPIO,
100 	DPSECI_DEST_DPCON
101 };
102 
103 /**
104  * struct dpseci_dest_cfg - Structure representing DPSECI destination parameters
105  * @dest_type: Destination type
106  * @dest_id: Either DPIO ID or DPCON ID, depending on the destination type
107  * @priority: Priority selection within the DPIO or DPCON channel; valid values
108  *	are 0-1 or 0-7, depending on the number of priorities in that channel;
109  *	not relevant for 'DPSECI_DEST_NONE' option
110  */
111 struct dpseci_dest_cfg {
112 	enum dpseci_dest dest_type;
113 	int dest_id;
114 	u8 priority;
115 };
116 
117 /**
118  * DPSECI queue modification options
119  */
120 
121 /**
122  * Select to modify the user's context associated with the queue
123  */
124 #define DPSECI_QUEUE_OPT_USER_CTX		0x00000001
125 
126 /**
127  * Select to modify the queue's destination
128  */
129 #define DPSECI_QUEUE_OPT_DEST			0x00000002
130 
131 /**
132  * Select to modify the queue's order preservation
133  */
134 #define DPSECI_QUEUE_OPT_ORDER_PRESERVATION	0x00000004
135 
136 /**
137  * struct dpseci_rx_queue_cfg - DPSECI RX queue configuration
138  * @options: Flags representing the suggested modifications to the queue;
139  *	Use any combination of 'DPSECI_QUEUE_OPT_<X>' flags
140  * @order_preservation_en: order preservation configuration for the rx queue
141  * valid only if 'DPSECI_QUEUE_OPT_ORDER_PRESERVATION' is contained in 'options'
142  * @user_ctx: User context value provided in the frame descriptor of each
143  *	dequeued frame;	valid only if 'DPSECI_QUEUE_OPT_USER_CTX' is contained
144  *	in 'options'
145  * @dest_cfg: Queue destination parameters; valid only if
146  *	'DPSECI_QUEUE_OPT_DEST' is contained in 'options'
147  */
148 struct dpseci_rx_queue_cfg {
149 	u32 options;
150 	int order_preservation_en;
151 	u64 user_ctx;
152 	struct dpseci_dest_cfg dest_cfg;
153 };
154 
155 int dpseci_set_rx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
156 			u8 queue, const struct dpseci_rx_queue_cfg *cfg);
157 
158 /**
159  * struct dpseci_rx_queue_attr - Structure representing attributes of Rx queues
160  * @user_ctx: User context value provided in the frame descriptor of each
161  *	dequeued frame
162  * @order_preservation_en: Status of the order preservation configuration on the
163  *	queue
164  * @dest_cfg: Queue destination configuration
165  * @fqid: Virtual FQID value to be used for dequeue operations
166  */
167 struct dpseci_rx_queue_attr {
168 	u64 user_ctx;
169 	int order_preservation_en;
170 	struct dpseci_dest_cfg dest_cfg;
171 	u32 fqid;
172 };
173 
174 int dpseci_get_rx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
175 			u8 queue, struct dpseci_rx_queue_attr *attr);
176 
177 /**
178  * struct dpseci_tx_queue_attr - Structure representing attributes of Tx queues
179  * @fqid: Virtual FQID to be used for sending frames to SEC hardware
180  * @priority: SEC hardware processing priority for the queue
181  */
182 struct dpseci_tx_queue_attr {
183 	u32 fqid;
184 	u8 priority;
185 };
186 
187 int dpseci_get_tx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
188 			u8 queue, struct dpseci_tx_queue_attr *attr);
189 
190 /**
191  * struct dpseci_sec_attr - Structure representing attributes of the SEC
192  *	hardware accelerator
193  * @ip_id: ID for SEC
194  * @major_rev: Major revision number for SEC
195  * @minor_rev: Minor revision number for SEC
196  * @era: SEC Era
197  * @deco_num: The number of copies of the DECO that are implemented in this
198  *	version of SEC
199  * @zuc_auth_acc_num: The number of copies of ZUCA that are implemented in this
200  *	version of SEC
201  * @zuc_enc_acc_num: The number of copies of ZUCE that are implemented in this
202  *	version of SEC
203  * @snow_f8_acc_num: The number of copies of the SNOW-f8 module that are
204  *	implemented in this version of SEC
205  * @snow_f9_acc_num: The number of copies of the SNOW-f9 module that are
206  *	implemented in this version of SEC
207  * @crc_acc_num: The number of copies of the CRC module that are implemented in
208  *	this version of SEC
209  * @pk_acc_num:  The number of copies of the Public Key module that are
210  *	implemented in this version of SEC
211  * @kasumi_acc_num: The number of copies of the Kasumi module that are
212  *	implemented in this version of SEC
213  * @rng_acc_num: The number of copies of the Random Number Generator that are
214  *	implemented in this version of SEC
215  * @md_acc_num: The number of copies of the MDHA (Hashing module) that are
216  *	implemented in this version of SEC
217  * @arc4_acc_num: The number of copies of the ARC4 module that are implemented
218  *	in this version of SEC
219  * @des_acc_num: The number of copies of the DES module that are implemented in
220  *	this version of SEC
221  * @aes_acc_num: The number of copies of the AES module that are implemented in
222  *	this version of SEC
223  * @ccha_acc_num: The number of copies of the ChaCha20 module that are
224  *	implemented in this version of SEC.
225  * @ptha_acc_num: The number of copies of the Poly1305 module that are
226  *	implemented in this version of SEC.
227  **/
228 struct dpseci_sec_attr {
229 	u16 ip_id;
230 	u8 major_rev;
231 	u8 minor_rev;
232 	u8 era;
233 	u8 deco_num;
234 	u8 zuc_auth_acc_num;
235 	u8 zuc_enc_acc_num;
236 	u8 snow_f8_acc_num;
237 	u8 snow_f9_acc_num;
238 	u8 crc_acc_num;
239 	u8 pk_acc_num;
240 	u8 kasumi_acc_num;
241 	u8 rng_acc_num;
242 	u8 md_acc_num;
243 	u8 arc4_acc_num;
244 	u8 des_acc_num;
245 	u8 aes_acc_num;
246 	u8 ccha_acc_num;
247 	u8 ptha_acc_num;
248 };
249 
250 int dpseci_get_sec_attr(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
251 			struct dpseci_sec_attr *attr);
252 
253 int dpseci_get_api_version(struct fsl_mc_io *mc_io, u32 cmd_flags,
254 			   u16 *major_ver, u16 *minor_ver);
255 
256 /**
257  * enum dpseci_congestion_unit - DPSECI congestion units
258  * @DPSECI_CONGESTION_UNIT_BYTES: bytes units
259  * @DPSECI_CONGESTION_UNIT_FRAMES: frames units
260  */
261 enum dpseci_congestion_unit {
262 	DPSECI_CONGESTION_UNIT_BYTES = 0,
263 	DPSECI_CONGESTION_UNIT_FRAMES
264 };
265 
266 /**
267  * CSCN message is written to message_iova once entering a
268  * congestion state (see 'threshold_entry')
269  */
270 #define DPSECI_CGN_MODE_WRITE_MEM_ON_ENTER		0x00000001
271 
272 /**
273  * CSCN message is written to message_iova once exiting a
274  * congestion state (see 'threshold_exit')
275  */
276 #define DPSECI_CGN_MODE_WRITE_MEM_ON_EXIT		0x00000002
277 
278 /**
279  * CSCN write will attempt to allocate into a cache (coherent write);
280  * valid only if 'DPSECI_CGN_MODE_WRITE_MEM_<X>' is selected
281  */
282 #define DPSECI_CGN_MODE_COHERENT_WRITE			0x00000004
283 
284 /**
285  * if 'dpseci_dest_cfg.dest_type != DPSECI_DEST_NONE' CSCN message is sent to
286  * DPIO/DPCON's WQ channel once entering a congestion state
287  * (see 'threshold_entry')
288  */
289 #define DPSECI_CGN_MODE_NOTIFY_DEST_ON_ENTER		0x00000008
290 
291 /**
292  * if 'dpseci_dest_cfg.dest_type != DPSECI_DEST_NONE' CSCN message is sent to
293  * DPIO/DPCON's WQ channel once exiting a congestion state
294  * (see 'threshold_exit')
295  */
296 #define DPSECI_CGN_MODE_NOTIFY_DEST_ON_EXIT		0x00000010
297 
298 /**
299  * if 'dpseci_dest_cfg.dest_type != DPSECI_DEST_NONE' when the CSCN is written
300  * to the sw-portal's DQRR, the DQRI interrupt is asserted immediately
301  * (if enabled)
302  */
303 #define DPSECI_CGN_MODE_INTR_COALESCING_DISABLED	0x00000020
304 
305 /**
306  * struct dpseci_congestion_notification_cfg - congestion notification
307  *	configuration
308  * @units: units type
309  * @threshold_entry: above this threshold we enter a congestion state.
310  *	set it to '0' to disable it
311  * @threshold_exit: below this threshold we exit the congestion state.
312  * @message_ctx: The context that will be part of the CSCN message
313  * @message_iova: I/O virtual address (must be in DMA-able memory),
314  *	must be 16B aligned;
315  * @dest_cfg: CSCN can be send to either DPIO or DPCON WQ channel
316  * @notification_mode: Mask of available options; use 'DPSECI_CGN_MODE_<X>'
317  *	values
318  */
319 struct dpseci_congestion_notification_cfg {
320 	enum dpseci_congestion_unit units;
321 	u32 threshold_entry;
322 	u32 threshold_exit;
323 	u64 message_ctx;
324 	u64 message_iova;
325 	struct dpseci_dest_cfg dest_cfg;
326 	u16 notification_mode;
327 };
328 
329 int dpseci_set_congestion_notification(struct fsl_mc_io *mc_io, u32 cmd_flags,
330 	u16 token, const struct dpseci_congestion_notification_cfg *cfg);
331 
332 int dpseci_get_congestion_notification(struct fsl_mc_io *mc_io, u32 cmd_flags,
333 	u16 token, struct dpseci_congestion_notification_cfg *cfg);
334 
335 #endif /* _DPSECI_H_ */
336