xref: /openbmc/linux/drivers/crypto/bcm/spum.h (revision 151f4e2b)
1 /*
2  * Copyright 2016 Broadcom
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License, version 2, as
6  * published by the Free Software Foundation (the "GPL").
7  *
8  * This program is distributed in the hope that it will be useful, but
9  * WITHOUT ANY WARRANTY; without even the implied warranty of
10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
11  * General Public License version 2 (GPLv2) for more details.
12  *
13  * You should have received a copy of the GNU General Public License
14  * version 2 (GPLv2) along with this source code.
15  */
16 
17 /*
18  * This file contains SPU message definitions specific to SPU-M.
19  */
20 
21 #ifndef _SPUM_H_
22 #define _SPUM_H_
23 
24 #define SPU_CRYPTO_OPERATION_GENERIC	0x1
25 
26 /* Length of STATUS field in tx and rx packets */
27 #define SPU_TX_STATUS_LEN  4
28 
29 /* SPU-M error codes */
30 #define SPU_STATUS_MASK                 0x0000FF00
31 #define SPU_STATUS_SUCCESS              0x00000000
32 #define SPU_STATUS_INVALID_ICV          0x00000100
33 
34 #define SPU_STATUS_ERROR_FLAG           0x00020000
35 
36 /* Request message. MH + EMH + BDESC + BD header */
37 #define SPU_REQ_FIXED_LEN 24
38 
39 /*
40  * Max length of a SPU message header. Used to allocate a buffer where
41  * the SPU message header is constructed. Can be used for either a SPU-M
42  * header or a SPU2 header.
43  * For SPU-M, sum of the following:
44  *    MH - 4 bytes
45  *    EMH - 4
46  *    SCTX - 3 +
47  *      max auth key len - 64
48  *      max cipher key len - 264 (RC4)
49  *      max IV len - 16
50  *    BDESC - 12
51  *    BD header - 4
52  * Total:  371
53  *
54  * For SPU2, FMD_SIZE (32) plus lengths of hash and cipher keys,
55  * hash and cipher IVs. If SPU2 does not support RC4, then
56  */
57 #define SPU_HEADER_ALLOC_LEN  (SPU_REQ_FIXED_LEN + MAX_KEY_SIZE + \
58 				MAX_KEY_SIZE + MAX_IV_SIZE)
59 
60 /*
61  * Response message header length. Normally MH, EMH, BD header, but when
62  * BD_SUPPRESS is used for hash requests, there is no BD header.
63  */
64 #define SPU_RESP_HDR_LEN 12
65 #define SPU_HASH_RESP_HDR_LEN 8
66 
67 /*
68  * Max value that can be represented in the Payload Length field of the BD
69  * header. This is a 16-bit field.
70  */
71 #define SPUM_NS2_MAX_PAYLOAD  (BIT(16) - 1)
72 
73 /*
74  * NSP SPU is limited to ~9KB because of FA2 FIFO size limitations;
75  * Set MAX_PAYLOAD to 8k to allow for addition of header, digest, etc.
76  * and stay within limitation.
77  */
78 
79 #define SPUM_NSP_MAX_PAYLOAD	8192
80 
81 /* Buffer Descriptor Header [BDESC]. SPU in big-endian mode. */
82 struct BDESC_HEADER {
83 	u16 offset_mac;		/* word 0 [31-16] */
84 	u16 length_mac;		/* word 0 [15-0]  */
85 	u16 offset_crypto;	/* word 1 [31-16] */
86 	u16 length_crypto;	/* word 1 [15-0]  */
87 	u16 offset_icv;		/* word 2 [31-16] */
88 	u16 offset_iv;		/* word 2 [15-0]  */
89 };
90 
91 /* Buffer Data Header [BD]. SPU in big-endian mode. */
92 struct BD_HEADER {
93 	u16 size;
94 	u16 prev_length;
95 };
96 
97 /* Command Context Header. SPU-M in big endian mode. */
98 struct MHEADER {
99 	u8 flags;	/* [31:24] */
100 	u8 op_code;	/* [23:16] */
101 	u16 reserved;	/* [15:0] */
102 };
103 
104 /* MH header flags bits */
105 #define MH_SUPDT_PRES   BIT(0)
106 #define MH_HASH_PRES    BIT(2)
107 #define MH_BD_PRES      BIT(3)
108 #define MH_MFM_PRES     BIT(4)
109 #define MH_BDESC_PRES   BIT(5)
110 #define MH_SCTX_PRES	BIT(7)
111 
112 /* SCTX word 0 bit offsets and fields masks */
113 #define SCTX_SIZE               0x000000FF
114 
115 /* SCTX word 1 bit shifts and field masks */
116 #define  UPDT_OFST              0x000000FF   /* offset of SCTX updateable fld */
117 #define  HASH_TYPE              0x00000300   /* hash alg operation type */
118 #define  HASH_TYPE_SHIFT                 8
119 #define  HASH_MODE              0x00001C00   /* one of spu2_hash_mode */
120 #define  HASH_MODE_SHIFT                10
121 #define  HASH_ALG               0x0000E000   /* hash algorithm */
122 #define  HASH_ALG_SHIFT                 13
123 #define  CIPHER_TYPE            0x00030000   /* encryption operation type */
124 #define  CIPHER_TYPE_SHIFT              16
125 #define  CIPHER_MODE            0x001C0000   /* encryption mode */
126 #define  CIPHER_MODE_SHIFT              18
127 #define  CIPHER_ALG             0x00E00000   /* encryption algo */
128 #define  CIPHER_ALG_SHIFT               21
129 #define  ICV_IS_512                BIT(27)
130 #define  ICV_IS_512_SHIFT		27
131 #define  CIPHER_ORDER               BIT(30)
132 #define  CIPHER_ORDER_SHIFT             30
133 #define  CIPHER_INBOUND             BIT(31)
134 #define  CIPHER_INBOUND_SHIFT           31
135 
136 /* SCTX word 2 bit shifts and field masks */
137 #define  EXP_IV_SIZE                   0x7
138 #define  IV_OFFSET                   BIT(3)
139 #define  IV_OFFSET_SHIFT                 3
140 #define  GEN_IV                      BIT(5)
141 #define  GEN_IV_SHIFT                    5
142 #define  EXPLICIT_IV                 BIT(6)
143 #define  EXPLICIT_IV_SHIFT               6
144 #define  SCTX_IV                     BIT(7)
145 #define  SCTX_IV_SHIFT                   7
146 #define  ICV_SIZE                   0x0F00
147 #define  ICV_SIZE_SHIFT                  8
148 #define  CHECK_ICV                  BIT(12)
149 #define  CHECK_ICV_SHIFT                12
150 #define  INSERT_ICV                 BIT(13)
151 #define  INSERT_ICV_SHIFT               13
152 #define  BD_SUPPRESS                BIT(19)
153 #define  BD_SUPPRESS_SHIFT              19
154 
155 /* Generic Mode Security Context Structure [SCTX] */
156 struct SCTX {
157 /* word 0: protocol flags */
158 	u32 proto_flags;
159 
160 /* word 1: cipher flags */
161 	u32 cipher_flags;
162 
163 /* word 2: Extended cipher flags */
164 	u32 ecf;
165 
166 };
167 
168 struct SPUHEADER {
169 	struct MHEADER mh;
170 	u32 emh;
171 	struct SCTX sa;
172 };
173 
174 #endif /* _SPUM_H_ */
175