1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * sun4i-ss-hash.c - hardware cryptographic accelerator for Allwinner A20 SoC 4 * 5 * Copyright (C) 2013-2015 Corentin LABBE <clabbe.montjoie@gmail.com> 6 * 7 * This file add support for MD5 and SHA1. 8 * 9 * You could find the datasheet in Documentation/arm/sunxi.rst 10 */ 11 #include "sun4i-ss.h" 12 #include <asm/unaligned.h> 13 #include <linux/scatterlist.h> 14 15 /* This is a totally arbitrary value */ 16 #define SS_TIMEOUT 100 17 18 int sun4i_hash_crainit(struct crypto_tfm *tfm) 19 { 20 struct sun4i_tfm_ctx *op = crypto_tfm_ctx(tfm); 21 struct ahash_alg *alg = __crypto_ahash_alg(tfm->__crt_alg); 22 struct sun4i_ss_alg_template *algt; 23 int err; 24 25 memset(op, 0, sizeof(struct sun4i_tfm_ctx)); 26 27 algt = container_of(alg, struct sun4i_ss_alg_template, alg.hash); 28 op->ss = algt->ss; 29 30 err = pm_runtime_get_sync(op->ss->dev); 31 if (err < 0) 32 return err; 33 34 crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), 35 sizeof(struct sun4i_req_ctx)); 36 return 0; 37 } 38 39 void sun4i_hash_craexit(struct crypto_tfm *tfm) 40 { 41 struct sun4i_tfm_ctx *op = crypto_tfm_ctx(tfm); 42 43 pm_runtime_put(op->ss->dev); 44 } 45 46 /* sun4i_hash_init: initialize request context */ 47 int sun4i_hash_init(struct ahash_request *areq) 48 { 49 struct sun4i_req_ctx *op = ahash_request_ctx(areq); 50 struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); 51 struct ahash_alg *alg = __crypto_ahash_alg(tfm->base.__crt_alg); 52 struct sun4i_ss_alg_template *algt; 53 54 memset(op, 0, sizeof(struct sun4i_req_ctx)); 55 56 algt = container_of(alg, struct sun4i_ss_alg_template, alg.hash); 57 op->mode = algt->mode; 58 59 return 0; 60 } 61 62 int sun4i_hash_export_md5(struct ahash_request *areq, void *out) 63 { 64 struct sun4i_req_ctx *op = ahash_request_ctx(areq); 65 struct md5_state *octx = out; 66 int i; 67 68 octx->byte_count = op->byte_count + op->len; 69 70 memcpy(octx->block, op->buf, op->len); 71 72 if (op->byte_count) { 73 for (i = 0; i < 4; i++) 74 octx->hash[i] = op->hash[i]; 75 } else { 76 octx->hash[0] = SHA1_H0; 77 octx->hash[1] = SHA1_H1; 78 octx->hash[2] = SHA1_H2; 79 octx->hash[3] = SHA1_H3; 80 } 81 82 return 0; 83 } 84 85 int sun4i_hash_import_md5(struct ahash_request *areq, const void *in) 86 { 87 struct sun4i_req_ctx *op = ahash_request_ctx(areq); 88 const struct md5_state *ictx = in; 89 int i; 90 91 sun4i_hash_init(areq); 92 93 op->byte_count = ictx->byte_count & ~0x3F; 94 op->len = ictx->byte_count & 0x3F; 95 96 memcpy(op->buf, ictx->block, op->len); 97 98 for (i = 0; i < 4; i++) 99 op->hash[i] = ictx->hash[i]; 100 101 return 0; 102 } 103 104 int sun4i_hash_export_sha1(struct ahash_request *areq, void *out) 105 { 106 struct sun4i_req_ctx *op = ahash_request_ctx(areq); 107 struct sha1_state *octx = out; 108 int i; 109 110 octx->count = op->byte_count + op->len; 111 112 memcpy(octx->buffer, op->buf, op->len); 113 114 if (op->byte_count) { 115 for (i = 0; i < 5; i++) 116 octx->state[i] = op->hash[i]; 117 } else { 118 octx->state[0] = SHA1_H0; 119 octx->state[1] = SHA1_H1; 120 octx->state[2] = SHA1_H2; 121 octx->state[3] = SHA1_H3; 122 octx->state[4] = SHA1_H4; 123 } 124 125 return 0; 126 } 127 128 int sun4i_hash_import_sha1(struct ahash_request *areq, const void *in) 129 { 130 struct sun4i_req_ctx *op = ahash_request_ctx(areq); 131 const struct sha1_state *ictx = in; 132 int i; 133 134 sun4i_hash_init(areq); 135 136 op->byte_count = ictx->count & ~0x3F; 137 op->len = ictx->count & 0x3F; 138 139 memcpy(op->buf, ictx->buffer, op->len); 140 141 for (i = 0; i < 5; i++) 142 op->hash[i] = ictx->state[i]; 143 144 return 0; 145 } 146 147 #define SS_HASH_UPDATE 1 148 #define SS_HASH_FINAL 2 149 150 /* 151 * sun4i_hash_update: update hash engine 152 * 153 * Could be used for both SHA1 and MD5 154 * Write data by step of 32bits and put then in the SS. 155 * 156 * Since we cannot leave partial data and hash state in the engine, 157 * we need to get the hash state at the end of this function. 158 * We can get the hash state every 64 bytes 159 * 160 * So the first work is to get the number of bytes to write to SS modulo 64 161 * The extra bytes will go to a temporary buffer op->buf storing op->len bytes 162 * 163 * So at the begin of update() 164 * if op->len + areq->nbytes < 64 165 * => all data will be written to wait buffer (op->buf) and end=0 166 * if not, write all data from op->buf to the device and position end to 167 * complete to 64bytes 168 * 169 * example 1: 170 * update1 60o => op->len=60 171 * update2 60o => need one more word to have 64 bytes 172 * end=4 173 * so write all data from op->buf and one word of SGs 174 * write remaining data in op->buf 175 * final state op->len=56 176 */ 177 static int sun4i_hash(struct ahash_request *areq) 178 { 179 /* 180 * i is the total bytes read from SGs, to be compared to areq->nbytes 181 * i is important because we cannot rely on SG length since the sum of 182 * SG->length could be greater than areq->nbytes 183 * 184 * end is the position when we need to stop writing to the device, 185 * to be compared to i 186 * 187 * in_i: advancement in the current SG 188 */ 189 unsigned int i = 0, end, fill, min_fill, nwait, nbw = 0, j = 0, todo; 190 unsigned int in_i = 0; 191 u32 spaces, rx_cnt = SS_RX_DEFAULT, bf[32] = {0}, v, ivmode = 0; 192 struct sun4i_req_ctx *op = ahash_request_ctx(areq); 193 struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); 194 struct ahash_alg *alg = __crypto_ahash_alg(tfm->base.__crt_alg); 195 struct sun4i_tfm_ctx *tfmctx = crypto_ahash_ctx(tfm); 196 struct sun4i_ss_ctx *ss = tfmctx->ss; 197 struct sun4i_ss_alg_template *algt; 198 struct scatterlist *in_sg = areq->src; 199 struct sg_mapping_iter mi; 200 int in_r, err = 0; 201 size_t copied = 0; 202 u32 wb = 0; 203 204 dev_dbg(ss->dev, "%s %s bc=%llu len=%u mode=%x wl=%u h0=%0x", 205 __func__, crypto_tfm_alg_name(areq->base.tfm), 206 op->byte_count, areq->nbytes, op->mode, 207 op->len, op->hash[0]); 208 209 if (unlikely(!areq->nbytes) && !(op->flags & SS_HASH_FINAL)) 210 return 0; 211 212 /* protect against overflow */ 213 if (unlikely(areq->nbytes > UINT_MAX - op->len)) { 214 dev_err(ss->dev, "Cannot process too large request\n"); 215 return -EINVAL; 216 } 217 218 if (op->len + areq->nbytes < 64 && !(op->flags & SS_HASH_FINAL)) { 219 /* linearize data to op->buf */ 220 copied = sg_pcopy_to_buffer(areq->src, sg_nents(areq->src), 221 op->buf + op->len, areq->nbytes, 0); 222 op->len += copied; 223 return 0; 224 } 225 226 spin_lock_bh(&ss->slock); 227 228 /* 229 * if some data have been processed before, 230 * we need to restore the partial hash state 231 */ 232 if (op->byte_count) { 233 ivmode = SS_IV_ARBITRARY; 234 for (i = 0; i < crypto_ahash_digestsize(tfm) / 4; i++) 235 writel(op->hash[i], ss->base + SS_IV0 + i * 4); 236 } 237 /* Enable the device */ 238 writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL); 239 240 if (!(op->flags & SS_HASH_UPDATE)) 241 goto hash_final; 242 243 /* start of handling data */ 244 if (!(op->flags & SS_HASH_FINAL)) { 245 end = ((areq->nbytes + op->len) / 64) * 64 - op->len; 246 247 if (end > areq->nbytes || areq->nbytes - end > 63) { 248 dev_err(ss->dev, "ERROR: Bound error %u %u\n", 249 end, areq->nbytes); 250 err = -EINVAL; 251 goto release_ss; 252 } 253 } else { 254 /* Since we have the flag final, we can go up to modulo 4 */ 255 if (areq->nbytes < 4) 256 end = 0; 257 else 258 end = ((areq->nbytes + op->len) / 4) * 4 - op->len; 259 } 260 261 /* TODO if SGlen % 4 and !op->len then DMA */ 262 i = 1; 263 while (in_sg && i == 1) { 264 if (in_sg->length % 4) 265 i = 0; 266 in_sg = sg_next(in_sg); 267 } 268 if (i == 1 && !op->len && areq->nbytes) 269 dev_dbg(ss->dev, "We can DMA\n"); 270 271 i = 0; 272 sg_miter_start(&mi, areq->src, sg_nents(areq->src), 273 SG_MITER_FROM_SG | SG_MITER_ATOMIC); 274 sg_miter_next(&mi); 275 in_i = 0; 276 277 do { 278 /* 279 * we need to linearize in two case: 280 * - the buffer is already used 281 * - the SG does not have enough byte remaining ( < 4) 282 */ 283 if (op->len || (mi.length - in_i) < 4) { 284 /* 285 * if we have entered here we have two reason to stop 286 * - the buffer is full 287 * - reach the end 288 */ 289 while (op->len < 64 && i < end) { 290 /* how many bytes we can read from current SG */ 291 in_r = min(end - i, 64 - op->len); 292 in_r = min_t(size_t, mi.length - in_i, in_r); 293 memcpy(op->buf + op->len, mi.addr + in_i, in_r); 294 op->len += in_r; 295 i += in_r; 296 in_i += in_r; 297 if (in_i == mi.length) { 298 sg_miter_next(&mi); 299 in_i = 0; 300 } 301 } 302 if (op->len > 3 && !(op->len % 4)) { 303 /* write buf to the device */ 304 writesl(ss->base + SS_RXFIFO, op->buf, 305 op->len / 4); 306 op->byte_count += op->len; 307 op->len = 0; 308 } 309 } 310 if (mi.length - in_i > 3 && i < end) { 311 /* how many bytes we can read from current SG */ 312 in_r = min_t(size_t, mi.length - in_i, areq->nbytes - i); 313 in_r = min_t(size_t, ((mi.length - in_i) / 4) * 4, in_r); 314 /* how many bytes we can write in the device*/ 315 todo = min3((u32)(end - i) / 4, rx_cnt, (u32)in_r / 4); 316 writesl(ss->base + SS_RXFIFO, mi.addr + in_i, todo); 317 op->byte_count += todo * 4; 318 i += todo * 4; 319 in_i += todo * 4; 320 rx_cnt -= todo; 321 if (!rx_cnt) { 322 spaces = readl(ss->base + SS_FCSR); 323 rx_cnt = SS_RXFIFO_SPACES(spaces); 324 } 325 if (in_i == mi.length) { 326 sg_miter_next(&mi); 327 in_i = 0; 328 } 329 } 330 } while (i < end); 331 332 /* 333 * Now we have written to the device all that we can, 334 * store the remaining bytes in op->buf 335 */ 336 if ((areq->nbytes - i) < 64) { 337 while (i < areq->nbytes && in_i < mi.length && op->len < 64) { 338 /* how many bytes we can read from current SG */ 339 in_r = min(areq->nbytes - i, 64 - op->len); 340 in_r = min_t(size_t, mi.length - in_i, in_r); 341 memcpy(op->buf + op->len, mi.addr + in_i, in_r); 342 op->len += in_r; 343 i += in_r; 344 in_i += in_r; 345 if (in_i == mi.length) { 346 sg_miter_next(&mi); 347 in_i = 0; 348 } 349 } 350 } 351 352 sg_miter_stop(&mi); 353 354 /* 355 * End of data process 356 * Now if we have the flag final go to finalize part 357 * If not, store the partial hash 358 */ 359 if (op->flags & SS_HASH_FINAL) 360 goto hash_final; 361 362 writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL); 363 i = 0; 364 do { 365 v = readl(ss->base + SS_CTL); 366 i++; 367 } while (i < SS_TIMEOUT && (v & SS_DATA_END)); 368 if (unlikely(i >= SS_TIMEOUT)) { 369 dev_err_ratelimited(ss->dev, 370 "ERROR: hash end timeout %d>%d ctl=%x len=%u\n", 371 i, SS_TIMEOUT, v, areq->nbytes); 372 err = -EIO; 373 goto release_ss; 374 } 375 376 /* 377 * The datasheet isn't very clear about when to retrieve the digest. The 378 * bit SS_DATA_END is cleared when the engine has processed the data and 379 * when the digest is computed *but* it doesn't mean the digest is 380 * available in the digest registers. Hence the delay to be sure we can 381 * read it. 382 */ 383 ndelay(1); 384 385 for (i = 0; i < crypto_ahash_digestsize(tfm) / 4; i++) 386 op->hash[i] = readl(ss->base + SS_MD0 + i * 4); 387 388 goto release_ss; 389 390 /* 391 * hash_final: finalize hashing operation 392 * 393 * If we have some remaining bytes, we write them. 394 * Then ask the SS for finalizing the hashing operation 395 * 396 * I do not check RX FIFO size in this function since the size is 32 397 * after each enabling and this function neither write more than 32 words. 398 * If we come from the update part, we cannot have more than 399 * 3 remaining bytes to write and SS is fast enough to not care about it. 400 */ 401 402 hash_final: 403 if (IS_ENABLED(CONFIG_CRYPTO_DEV_SUN4I_SS_DEBUG)) { 404 algt = container_of(alg, struct sun4i_ss_alg_template, alg.hash); 405 algt->stat_req++; 406 } 407 408 /* write the remaining words of the wait buffer */ 409 if (op->len) { 410 nwait = op->len / 4; 411 if (nwait) { 412 writesl(ss->base + SS_RXFIFO, op->buf, nwait); 413 op->byte_count += 4 * nwait; 414 } 415 416 nbw = op->len - 4 * nwait; 417 if (nbw) { 418 wb = le32_to_cpup((__le32 *)(op->buf + nwait * 4)); 419 wb &= GENMASK((nbw * 8) - 1, 0); 420 421 op->byte_count += nbw; 422 } 423 } 424 425 /* write the remaining bytes of the nbw buffer */ 426 wb |= ((1 << 7) << (nbw * 8)); 427 ((__le32 *)bf)[j++] = cpu_to_le32(wb); 428 429 /* 430 * number of space to pad to obtain 64o minus 8(size) minus 4 (final 1) 431 * I take the operations from other MD5/SHA1 implementations 432 */ 433 434 /* last block size */ 435 fill = 64 - (op->byte_count % 64); 436 min_fill = 2 * sizeof(u32) + (nbw ? 0 : sizeof(u32)); 437 438 /* if we can't fill all data, jump to the next 64 block */ 439 if (fill < min_fill) 440 fill += 64; 441 442 j += (fill - min_fill) / sizeof(u32); 443 444 /* write the length of data */ 445 if (op->mode == SS_OP_SHA1) { 446 __be64 *bits = (__be64 *)&bf[j]; 447 *bits = cpu_to_be64(op->byte_count << 3); 448 j += 2; 449 } else { 450 __le64 *bits = (__le64 *)&bf[j]; 451 *bits = cpu_to_le64(op->byte_count << 3); 452 j += 2; 453 } 454 writesl(ss->base + SS_RXFIFO, bf, j); 455 456 /* Tell the SS to stop the hashing */ 457 writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL); 458 459 /* 460 * Wait for SS to finish the hash. 461 * The timeout could happen only in case of bad overclocking 462 * or driver bug. 463 */ 464 i = 0; 465 do { 466 v = readl(ss->base + SS_CTL); 467 i++; 468 } while (i < SS_TIMEOUT && (v & SS_DATA_END)); 469 if (unlikely(i >= SS_TIMEOUT)) { 470 dev_err_ratelimited(ss->dev, 471 "ERROR: hash end timeout %d>%d ctl=%x len=%u\n", 472 i, SS_TIMEOUT, v, areq->nbytes); 473 err = -EIO; 474 goto release_ss; 475 } 476 477 /* 478 * The datasheet isn't very clear about when to retrieve the digest. The 479 * bit SS_DATA_END is cleared when the engine has processed the data and 480 * when the digest is computed *but* it doesn't mean the digest is 481 * available in the digest registers. Hence the delay to be sure we can 482 * read it. 483 */ 484 ndelay(1); 485 486 /* Get the hash from the device */ 487 if (op->mode == SS_OP_SHA1) { 488 for (i = 0; i < 5; i++) { 489 v = readl(ss->base + SS_MD0 + i * 4); 490 if (ss->variant->sha1_in_be) 491 put_unaligned_le32(v, areq->result + i * 4); 492 else 493 put_unaligned_be32(v, areq->result + i * 4); 494 } 495 } else { 496 for (i = 0; i < 4; i++) { 497 v = readl(ss->base + SS_MD0 + i * 4); 498 put_unaligned_le32(v, areq->result + i * 4); 499 } 500 } 501 502 release_ss: 503 writel(0, ss->base + SS_CTL); 504 spin_unlock_bh(&ss->slock); 505 return err; 506 } 507 508 int sun4i_hash_final(struct ahash_request *areq) 509 { 510 struct sun4i_req_ctx *op = ahash_request_ctx(areq); 511 512 op->flags = SS_HASH_FINAL; 513 return sun4i_hash(areq); 514 } 515 516 int sun4i_hash_update(struct ahash_request *areq) 517 { 518 struct sun4i_req_ctx *op = ahash_request_ctx(areq); 519 520 op->flags = SS_HASH_UPDATE; 521 return sun4i_hash(areq); 522 } 523 524 /* sun4i_hash_finup: finalize hashing operation after an update */ 525 int sun4i_hash_finup(struct ahash_request *areq) 526 { 527 struct sun4i_req_ctx *op = ahash_request_ctx(areq); 528 529 op->flags = SS_HASH_UPDATE | SS_HASH_FINAL; 530 return sun4i_hash(areq); 531 } 532 533 /* combo of init/update/final functions */ 534 int sun4i_hash_digest(struct ahash_request *areq) 535 { 536 int err; 537 struct sun4i_req_ctx *op = ahash_request_ctx(areq); 538 539 err = sun4i_hash_init(areq); 540 if (err) 541 return err; 542 543 op->flags = SS_HASH_UPDATE | SS_HASH_FINAL; 544 return sun4i_hash(areq); 545 } 546