1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * TI CPUFreq/OPP hw-supported driver 4 * 5 * Copyright (C) 2016-2017 Texas Instruments, Inc. 6 * Dave Gerlach <d-gerlach@ti.com> 7 */ 8 9 #include <linux/cpu.h> 10 #include <linux/io.h> 11 #include <linux/mfd/syscon.h> 12 #include <linux/module.h> 13 #include <linux/init.h> 14 #include <linux/of.h> 15 #include <linux/platform_device.h> 16 #include <linux/pm_opp.h> 17 #include <linux/regmap.h> 18 #include <linux/slab.h> 19 20 #define REVISION_MASK 0xF 21 #define REVISION_SHIFT 28 22 23 #define AM33XX_800M_ARM_MPU_MAX_FREQ 0x1E2F 24 #define AM43XX_600M_ARM_MPU_MAX_FREQ 0xFFA 25 26 #define DRA7_EFUSE_HAS_OD_MPU_OPP 11 27 #define DRA7_EFUSE_HAS_HIGH_MPU_OPP 15 28 #define DRA76_EFUSE_HAS_PLUS_MPU_OPP 18 29 #define DRA7_EFUSE_HAS_ALL_MPU_OPP 23 30 #define DRA76_EFUSE_HAS_ALL_MPU_OPP 24 31 32 #define DRA7_EFUSE_NOM_MPU_OPP BIT(0) 33 #define DRA7_EFUSE_OD_MPU_OPP BIT(1) 34 #define DRA7_EFUSE_HIGH_MPU_OPP BIT(2) 35 #define DRA76_EFUSE_PLUS_MPU_OPP BIT(3) 36 37 #define OMAP3_CONTROL_DEVICE_STATUS 0x4800244C 38 #define OMAP3_CONTROL_IDCODE 0x4830A204 39 #define OMAP34xx_ProdID_SKUID 0x4830A20C 40 #define OMAP3_SYSCON_BASE (0x48000000 + 0x2000 + 0x270) 41 42 #define AM625_EFUSE_K_MPU_OPP 11 43 #define AM625_EFUSE_S_MPU_OPP 19 44 #define AM625_EFUSE_T_MPU_OPP 20 45 46 #define AM625_SUPPORT_K_MPU_OPP BIT(0) 47 #define AM625_SUPPORT_S_MPU_OPP BIT(1) 48 #define AM625_SUPPORT_T_MPU_OPP BIT(2) 49 50 #define VERSION_COUNT 2 51 52 struct ti_cpufreq_data; 53 54 struct ti_cpufreq_soc_data { 55 const char * const *reg_names; 56 unsigned long (*efuse_xlate)(struct ti_cpufreq_data *opp_data, 57 unsigned long efuse); 58 unsigned long efuse_fallback; 59 unsigned long efuse_offset; 60 unsigned long efuse_mask; 61 unsigned long efuse_shift; 62 unsigned long rev_offset; 63 bool multi_regulator; 64 }; 65 66 struct ti_cpufreq_data { 67 struct device *cpu_dev; 68 struct device_node *opp_node; 69 struct regmap *syscon; 70 const struct ti_cpufreq_soc_data *soc_data; 71 }; 72 73 static unsigned long amx3_efuse_xlate(struct ti_cpufreq_data *opp_data, 74 unsigned long efuse) 75 { 76 if (!efuse) 77 efuse = opp_data->soc_data->efuse_fallback; 78 /* AM335x and AM437x use "OPP disable" bits, so invert */ 79 return ~efuse; 80 } 81 82 static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data, 83 unsigned long efuse) 84 { 85 unsigned long calculated_efuse = DRA7_EFUSE_NOM_MPU_OPP; 86 87 /* 88 * The efuse on dra7 and am57 parts contains a specific 89 * value indicating the highest available OPP. 90 */ 91 92 switch (efuse) { 93 case DRA76_EFUSE_HAS_PLUS_MPU_OPP: 94 case DRA76_EFUSE_HAS_ALL_MPU_OPP: 95 calculated_efuse |= DRA76_EFUSE_PLUS_MPU_OPP; 96 fallthrough; 97 case DRA7_EFUSE_HAS_ALL_MPU_OPP: 98 case DRA7_EFUSE_HAS_HIGH_MPU_OPP: 99 calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP; 100 fallthrough; 101 case DRA7_EFUSE_HAS_OD_MPU_OPP: 102 calculated_efuse |= DRA7_EFUSE_OD_MPU_OPP; 103 } 104 105 return calculated_efuse; 106 } 107 108 static unsigned long omap3_efuse_xlate(struct ti_cpufreq_data *opp_data, 109 unsigned long efuse) 110 { 111 /* OPP enable bit ("Speed Binned") */ 112 return BIT(efuse); 113 } 114 115 static unsigned long am625_efuse_xlate(struct ti_cpufreq_data *opp_data, 116 unsigned long efuse) 117 { 118 unsigned long calculated_efuse = AM625_SUPPORT_K_MPU_OPP; 119 120 switch (efuse) { 121 case AM625_EFUSE_T_MPU_OPP: 122 calculated_efuse |= AM625_SUPPORT_T_MPU_OPP; 123 fallthrough; 124 case AM625_EFUSE_S_MPU_OPP: 125 calculated_efuse |= AM625_SUPPORT_S_MPU_OPP; 126 fallthrough; 127 case AM625_EFUSE_K_MPU_OPP: 128 calculated_efuse |= AM625_SUPPORT_K_MPU_OPP; 129 } 130 131 return calculated_efuse; 132 } 133 134 static struct ti_cpufreq_soc_data am3x_soc_data = { 135 .efuse_xlate = amx3_efuse_xlate, 136 .efuse_fallback = AM33XX_800M_ARM_MPU_MAX_FREQ, 137 .efuse_offset = 0x07fc, 138 .efuse_mask = 0x1fff, 139 .rev_offset = 0x600, 140 .multi_regulator = false, 141 }; 142 143 static struct ti_cpufreq_soc_data am4x_soc_data = { 144 .efuse_xlate = amx3_efuse_xlate, 145 .efuse_fallback = AM43XX_600M_ARM_MPU_MAX_FREQ, 146 .efuse_offset = 0x0610, 147 .efuse_mask = 0x3f, 148 .rev_offset = 0x600, 149 .multi_regulator = false, 150 }; 151 152 static struct ti_cpufreq_soc_data dra7_soc_data = { 153 .efuse_xlate = dra7_efuse_xlate, 154 .efuse_offset = 0x020c, 155 .efuse_mask = 0xf80000, 156 .efuse_shift = 19, 157 .rev_offset = 0x204, 158 .multi_regulator = true, 159 }; 160 161 /* 162 * OMAP35x TRM (SPRUF98K): 163 * CONTROL_IDCODE (0x4830 A204) describes Silicon revisions. 164 * Control OMAP Status Register 15:0 (Address 0x4800 244C) 165 * to separate between omap3503, omap3515, omap3525, omap3530 166 * and feature presence. 167 * There are encodings for versions limited to 400/266MHz 168 * but we ignore. 169 * Not clear if this also holds for omap34xx. 170 * some eFuse values e.g. CONTROL_FUSE_OPP1_VDD1 171 * are stored in the SYSCON register range 172 * Register 0x4830A20C [ProdID.SKUID] [0:3] 173 * 0x0 for normal 600/430MHz device. 174 * 0x8 for 720/520MHz device. 175 * Not clear what omap34xx value is. 176 */ 177 178 static struct ti_cpufreq_soc_data omap34xx_soc_data = { 179 .efuse_xlate = omap3_efuse_xlate, 180 .efuse_offset = OMAP34xx_ProdID_SKUID - OMAP3_SYSCON_BASE, 181 .efuse_shift = 3, 182 .efuse_mask = BIT(3), 183 .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE, 184 .multi_regulator = false, 185 }; 186 187 /* 188 * AM/DM37x TRM (SPRUGN4M) 189 * CONTROL_IDCODE (0x4830 A204) describes Silicon revisions. 190 * Control Device Status Register 15:0 (Address 0x4800 244C) 191 * to separate between am3703, am3715, dm3725, dm3730 192 * and feature presence. 193 * Speed Binned = Bit 9 194 * 0 800/600 MHz 195 * 1 1000/800 MHz 196 * some eFuse values e.g. CONTROL_FUSE_OPP 1G_VDD1 197 * are stored in the SYSCON register range. 198 * There is no 0x4830A20C [ProdID.SKUID] register (exists but 199 * seems to always read as 0). 200 */ 201 202 static const char * const omap3_reg_names[] = {"cpu0", "vbb", NULL}; 203 204 static struct ti_cpufreq_soc_data omap36xx_soc_data = { 205 .reg_names = omap3_reg_names, 206 .efuse_xlate = omap3_efuse_xlate, 207 .efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE, 208 .efuse_shift = 9, 209 .efuse_mask = BIT(9), 210 .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE, 211 .multi_regulator = true, 212 }; 213 214 /* 215 * AM3517 is quite similar to AM/DM37x except that it has no 216 * high speed grade eFuse and no abb ldo 217 */ 218 219 static struct ti_cpufreq_soc_data am3517_soc_data = { 220 .efuse_xlate = omap3_efuse_xlate, 221 .efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE, 222 .efuse_shift = 0, 223 .efuse_mask = 0, 224 .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE, 225 .multi_regulator = false, 226 }; 227 228 static struct ti_cpufreq_soc_data am625_soc_data = { 229 .efuse_xlate = am625_efuse_xlate, 230 .efuse_offset = 0x0018, 231 .efuse_mask = 0x07c0, 232 .efuse_shift = 0x6, 233 .rev_offset = 0x0014, 234 .multi_regulator = false, 235 }; 236 237 /** 238 * ti_cpufreq_get_efuse() - Parse and return efuse value present on SoC 239 * @opp_data: pointer to ti_cpufreq_data context 240 * @efuse_value: Set to the value parsed from efuse 241 * 242 * Returns error code if efuse not read properly. 243 */ 244 static int ti_cpufreq_get_efuse(struct ti_cpufreq_data *opp_data, 245 u32 *efuse_value) 246 { 247 struct device *dev = opp_data->cpu_dev; 248 u32 efuse; 249 int ret; 250 251 ret = regmap_read(opp_data->syscon, opp_data->soc_data->efuse_offset, 252 &efuse); 253 if (ret == -EIO) { 254 /* not a syscon register! */ 255 void __iomem *regs = ioremap(OMAP3_SYSCON_BASE + 256 opp_data->soc_data->efuse_offset, 4); 257 258 if (!regs) 259 return -ENOMEM; 260 efuse = readl(regs); 261 iounmap(regs); 262 } 263 else if (ret) { 264 dev_err(dev, 265 "Failed to read the efuse value from syscon: %d\n", 266 ret); 267 return ret; 268 } 269 270 efuse = (efuse & opp_data->soc_data->efuse_mask); 271 efuse >>= opp_data->soc_data->efuse_shift; 272 273 *efuse_value = opp_data->soc_data->efuse_xlate(opp_data, efuse); 274 275 return 0; 276 } 277 278 /** 279 * ti_cpufreq_get_rev() - Parse and return rev value present on SoC 280 * @opp_data: pointer to ti_cpufreq_data context 281 * @revision_value: Set to the value parsed from revision register 282 * 283 * Returns error code if revision not read properly. 284 */ 285 static int ti_cpufreq_get_rev(struct ti_cpufreq_data *opp_data, 286 u32 *revision_value) 287 { 288 struct device *dev = opp_data->cpu_dev; 289 u32 revision; 290 int ret; 291 292 ret = regmap_read(opp_data->syscon, opp_data->soc_data->rev_offset, 293 &revision); 294 if (ret == -EIO) { 295 /* not a syscon register! */ 296 void __iomem *regs = ioremap(OMAP3_SYSCON_BASE + 297 opp_data->soc_data->rev_offset, 4); 298 299 if (!regs) 300 return -ENOMEM; 301 revision = readl(regs); 302 iounmap(regs); 303 } 304 else if (ret) { 305 dev_err(dev, 306 "Failed to read the revision number from syscon: %d\n", 307 ret); 308 return ret; 309 } 310 311 *revision_value = BIT((revision >> REVISION_SHIFT) & REVISION_MASK); 312 313 return 0; 314 } 315 316 static int ti_cpufreq_setup_syscon_register(struct ti_cpufreq_data *opp_data) 317 { 318 struct device *dev = opp_data->cpu_dev; 319 struct device_node *np = opp_data->opp_node; 320 321 opp_data->syscon = syscon_regmap_lookup_by_phandle(np, 322 "syscon"); 323 if (IS_ERR(opp_data->syscon)) { 324 dev_err(dev, 325 "\"syscon\" is missing, cannot use OPPv2 table.\n"); 326 return PTR_ERR(opp_data->syscon); 327 } 328 329 return 0; 330 } 331 332 static const struct of_device_id ti_cpufreq_of_match[] = { 333 { .compatible = "ti,am33xx", .data = &am3x_soc_data, }, 334 { .compatible = "ti,am3517", .data = &am3517_soc_data, }, 335 { .compatible = "ti,am43", .data = &am4x_soc_data, }, 336 { .compatible = "ti,dra7", .data = &dra7_soc_data }, 337 { .compatible = "ti,omap34xx", .data = &omap34xx_soc_data, }, 338 { .compatible = "ti,omap36xx", .data = &omap36xx_soc_data, }, 339 { .compatible = "ti,am625", .data = &am625_soc_data, }, 340 { .compatible = "ti,am62a7", .data = &am625_soc_data, }, 341 /* legacy */ 342 { .compatible = "ti,omap3430", .data = &omap34xx_soc_data, }, 343 { .compatible = "ti,omap3630", .data = &omap36xx_soc_data, }, 344 {}, 345 }; 346 347 static const struct of_device_id *ti_cpufreq_match_node(void) 348 { 349 struct device_node *np; 350 const struct of_device_id *match; 351 352 np = of_find_node_by_path("/"); 353 match = of_match_node(ti_cpufreq_of_match, np); 354 of_node_put(np); 355 356 return match; 357 } 358 359 static int ti_cpufreq_probe(struct platform_device *pdev) 360 { 361 u32 version[VERSION_COUNT]; 362 const struct of_device_id *match; 363 struct ti_cpufreq_data *opp_data; 364 const char * const default_reg_names[] = {"vdd", "vbb", NULL}; 365 int ret; 366 struct dev_pm_opp_config config = { 367 .supported_hw = version, 368 .supported_hw_count = ARRAY_SIZE(version), 369 }; 370 371 match = dev_get_platdata(&pdev->dev); 372 if (!match) 373 return -ENODEV; 374 375 opp_data = devm_kzalloc(&pdev->dev, sizeof(*opp_data), GFP_KERNEL); 376 if (!opp_data) 377 return -ENOMEM; 378 379 opp_data->soc_data = match->data; 380 381 opp_data->cpu_dev = get_cpu_device(0); 382 if (!opp_data->cpu_dev) { 383 pr_err("%s: Failed to get device for CPU0\n", __func__); 384 return -ENODEV; 385 } 386 387 opp_data->opp_node = dev_pm_opp_of_get_opp_desc_node(opp_data->cpu_dev); 388 if (!opp_data->opp_node) { 389 dev_info(opp_data->cpu_dev, 390 "OPP-v2 not supported, cpufreq-dt will attempt to use legacy tables.\n"); 391 goto register_cpufreq_dt; 392 } 393 394 ret = ti_cpufreq_setup_syscon_register(opp_data); 395 if (ret) 396 goto fail_put_node; 397 398 /* 399 * OPPs determine whether or not they are supported based on 400 * two metrics: 401 * 0 - SoC Revision 402 * 1 - eFuse value 403 */ 404 ret = ti_cpufreq_get_rev(opp_data, &version[0]); 405 if (ret) 406 goto fail_put_node; 407 408 ret = ti_cpufreq_get_efuse(opp_data, &version[1]); 409 if (ret) 410 goto fail_put_node; 411 412 if (opp_data->soc_data->multi_regulator) { 413 if (opp_data->soc_data->reg_names) 414 config.regulator_names = opp_data->soc_data->reg_names; 415 else 416 config.regulator_names = default_reg_names; 417 } 418 419 ret = dev_pm_opp_set_config(opp_data->cpu_dev, &config); 420 if (ret < 0) { 421 dev_err(opp_data->cpu_dev, "Failed to set OPP config\n"); 422 goto fail_put_node; 423 } 424 425 of_node_put(opp_data->opp_node); 426 427 register_cpufreq_dt: 428 platform_device_register_simple("cpufreq-dt", -1, NULL, 0); 429 430 return 0; 431 432 fail_put_node: 433 of_node_put(opp_data->opp_node); 434 435 return ret; 436 } 437 438 static int __init ti_cpufreq_init(void) 439 { 440 const struct of_device_id *match; 441 442 /* Check to ensure we are on a compatible platform */ 443 match = ti_cpufreq_match_node(); 444 if (match) 445 platform_device_register_data(NULL, "ti-cpufreq", -1, match, 446 sizeof(*match)); 447 448 return 0; 449 } 450 module_init(ti_cpufreq_init); 451 452 static struct platform_driver ti_cpufreq_driver = { 453 .probe = ti_cpufreq_probe, 454 .driver = { 455 .name = "ti-cpufreq", 456 }, 457 }; 458 builtin_platform_driver(ti_cpufreq_driver); 459 460 MODULE_DESCRIPTION("TI CPUFreq/OPP hw-supported driver"); 461 MODULE_AUTHOR("Dave Gerlach <d-gerlach@ti.com>"); 462 MODULE_LICENSE("GPL v2"); 463