1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> 4 * 5 * Library for common functions for Intel SpeedStep v.1 and v.2 support 6 * 7 * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* 8 */ 9 10 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 11 12 #include <linux/kernel.h> 13 #include <linux/module.h> 14 #include <linux/moduleparam.h> 15 #include <linux/init.h> 16 #include <linux/cpufreq.h> 17 18 #include <asm/msr.h> 19 #include <asm/tsc.h> 20 #include "speedstep-lib.h" 21 22 #define PFX "speedstep-lib: " 23 24 #ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK 25 static int relaxed_check; 26 #else 27 #define relaxed_check 0 28 #endif 29 30 /********************************************************************* 31 * GET PROCESSOR CORE SPEED IN KHZ * 32 *********************************************************************/ 33 34 static unsigned int pentium3_get_frequency(enum speedstep_processor processor) 35 { 36 /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ 37 static const struct { 38 unsigned int ratio; /* Frequency Multiplier (x10) */ 39 u8 bitmap; /* power on configuration bits 40 [27, 25:22] (in MSR 0x2a) */ 41 } msr_decode_mult[] = { 42 { 30, 0x01 }, 43 { 35, 0x05 }, 44 { 40, 0x02 }, 45 { 45, 0x06 }, 46 { 50, 0x00 }, 47 { 55, 0x04 }, 48 { 60, 0x0b }, 49 { 65, 0x0f }, 50 { 70, 0x09 }, 51 { 75, 0x0d }, 52 { 80, 0x0a }, 53 { 85, 0x26 }, 54 { 90, 0x20 }, 55 { 100, 0x2b }, 56 { 0, 0xff } /* error or unknown value */ 57 }; 58 59 /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */ 60 static const struct { 61 unsigned int value; /* Front Side Bus speed in MHz */ 62 u8 bitmap; /* power on configuration bits [18: 19] 63 (in MSR 0x2a) */ 64 } msr_decode_fsb[] = { 65 { 66, 0x0 }, 66 { 100, 0x2 }, 67 { 133, 0x1 }, 68 { 0, 0xff} 69 }; 70 71 u32 msr_lo, msr_tmp; 72 int i = 0, j = 0; 73 74 /* read MSR 0x2a - we only need the low 32 bits */ 75 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); 76 pr_debug("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); 77 msr_tmp = msr_lo; 78 79 /* decode the FSB */ 80 msr_tmp &= 0x00c0000; 81 msr_tmp >>= 18; 82 while (msr_tmp != msr_decode_fsb[i].bitmap) { 83 if (msr_decode_fsb[i].bitmap == 0xff) 84 return 0; 85 i++; 86 } 87 88 /* decode the multiplier */ 89 if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) { 90 pr_debug("workaround for early PIIIs\n"); 91 msr_lo &= 0x03c00000; 92 } else 93 msr_lo &= 0x0bc00000; 94 msr_lo >>= 22; 95 while (msr_lo != msr_decode_mult[j].bitmap) { 96 if (msr_decode_mult[j].bitmap == 0xff) 97 return 0; 98 j++; 99 } 100 101 pr_debug("speed is %u\n", 102 (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100)); 103 104 return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100; 105 } 106 107 108 static unsigned int pentiumM_get_frequency(void) 109 { 110 u32 msr_lo, msr_tmp; 111 112 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); 113 pr_debug("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); 114 115 /* see table B-2 of 24547212.pdf */ 116 if (msr_lo & 0x00040000) { 117 printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n", 118 msr_lo, msr_tmp); 119 return 0; 120 } 121 122 msr_tmp = (msr_lo >> 22) & 0x1f; 123 pr_debug("bits 22-26 are 0x%x, speed is %u\n", 124 msr_tmp, (msr_tmp * 100 * 1000)); 125 126 return msr_tmp * 100 * 1000; 127 } 128 129 static unsigned int pentium_core_get_frequency(void) 130 { 131 u32 fsb = 0; 132 u32 msr_lo, msr_tmp; 133 int ret; 134 135 rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp); 136 /* see table B-2 of 25366920.pdf */ 137 switch (msr_lo & 0x07) { 138 case 5: 139 fsb = 100000; 140 break; 141 case 1: 142 fsb = 133333; 143 break; 144 case 3: 145 fsb = 166667; 146 break; 147 case 2: 148 fsb = 200000; 149 break; 150 case 0: 151 fsb = 266667; 152 break; 153 case 4: 154 fsb = 333333; 155 break; 156 default: 157 pr_err("PCORE - MSR_FSB_FREQ undefined value\n"); 158 } 159 160 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); 161 pr_debug("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", 162 msr_lo, msr_tmp); 163 164 msr_tmp = (msr_lo >> 22) & 0x1f; 165 pr_debug("bits 22-26 are 0x%x, speed is %u\n", 166 msr_tmp, (msr_tmp * fsb)); 167 168 ret = (msr_tmp * fsb); 169 return ret; 170 } 171 172 173 static unsigned int pentium4_get_frequency(void) 174 { 175 struct cpuinfo_x86 *c = &boot_cpu_data; 176 u32 msr_lo, msr_hi, mult; 177 unsigned int fsb = 0; 178 unsigned int ret; 179 u8 fsb_code; 180 181 /* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency 182 * to System Bus Frequency Ratio Field in the Processor Frequency 183 * Configuration Register of the MSR. Therefore the current 184 * frequency cannot be calculated and has to be measured. 185 */ 186 if (c->x86_model < 2) 187 return cpu_khz; 188 189 rdmsr(0x2c, msr_lo, msr_hi); 190 191 pr_debug("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi); 192 193 /* decode the FSB: see IA-32 Intel (C) Architecture Software 194 * Developer's Manual, Volume 3: System Prgramming Guide, 195 * revision #12 in Table B-1: MSRs in the Pentium 4 and 196 * Intel Xeon Processors, on page B-4 and B-5. 197 */ 198 fsb_code = (msr_lo >> 16) & 0x7; 199 switch (fsb_code) { 200 case 0: 201 fsb = 100 * 1000; 202 break; 203 case 1: 204 fsb = 13333 * 10; 205 break; 206 case 2: 207 fsb = 200 * 1000; 208 break; 209 } 210 211 if (!fsb) 212 printk(KERN_DEBUG PFX "couldn't detect FSB speed. " 213 "Please send an e-mail to <linux@brodo.de>\n"); 214 215 /* Multiplier. */ 216 mult = msr_lo >> 24; 217 218 pr_debug("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", 219 fsb, mult, (fsb * mult)); 220 221 ret = (fsb * mult); 222 return ret; 223 } 224 225 226 /* Warning: may get called from smp_call_function_single. */ 227 unsigned int speedstep_get_frequency(enum speedstep_processor processor) 228 { 229 switch (processor) { 230 case SPEEDSTEP_CPU_PCORE: 231 return pentium_core_get_frequency(); 232 case SPEEDSTEP_CPU_PM: 233 return pentiumM_get_frequency(); 234 case SPEEDSTEP_CPU_P4D: 235 case SPEEDSTEP_CPU_P4M: 236 return pentium4_get_frequency(); 237 case SPEEDSTEP_CPU_PIII_T: 238 case SPEEDSTEP_CPU_PIII_C: 239 case SPEEDSTEP_CPU_PIII_C_EARLY: 240 return pentium3_get_frequency(processor); 241 default: 242 return 0; 243 }; 244 return 0; 245 } 246 EXPORT_SYMBOL_GPL(speedstep_get_frequency); 247 248 249 /********************************************************************* 250 * DETECT SPEEDSTEP-CAPABLE PROCESSOR * 251 *********************************************************************/ 252 253 /* Keep in sync with the x86_cpu_id tables in the different modules */ 254 enum speedstep_processor speedstep_detect_processor(void) 255 { 256 struct cpuinfo_x86 *c = &cpu_data(0); 257 u32 ebx, msr_lo, msr_hi; 258 259 pr_debug("x86: %x, model: %x\n", c->x86, c->x86_model); 260 261 if ((c->x86_vendor != X86_VENDOR_INTEL) || 262 ((c->x86 != 6) && (c->x86 != 0xF))) 263 return 0; 264 265 if (c->x86 == 0xF) { 266 /* Intel Mobile Pentium 4-M 267 * or Intel Mobile Pentium 4 with 533 MHz FSB */ 268 if (c->x86_model != 2) 269 return 0; 270 271 ebx = cpuid_ebx(0x00000001); 272 ebx &= 0x000000FF; 273 274 pr_debug("ebx value is %x, x86_stepping is %x\n", ebx, c->x86_stepping); 275 276 switch (c->x86_stepping) { 277 case 4: 278 /* 279 * B-stepping [M-P4-M] 280 * sample has ebx = 0x0f, production has 0x0e. 281 */ 282 if ((ebx == 0x0e) || (ebx == 0x0f)) 283 return SPEEDSTEP_CPU_P4M; 284 break; 285 case 7: 286 /* 287 * C-stepping [M-P4-M] 288 * needs to have ebx=0x0e, else it's a celeron: 289 * cf. 25130917.pdf / page 7, footnote 5 even 290 * though 25072120.pdf / page 7 doesn't say 291 * samples are only of B-stepping... 292 */ 293 if (ebx == 0x0e) 294 return SPEEDSTEP_CPU_P4M; 295 break; 296 case 9: 297 /* 298 * D-stepping [M-P4-M or M-P4/533] 299 * 300 * this is totally strange: CPUID 0x0F29 is 301 * used by M-P4-M, M-P4/533 and(!) Celeron CPUs. 302 * The latter need to be sorted out as they don't 303 * support speedstep. 304 * Celerons with CPUID 0x0F29 may have either 305 * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything 306 * specific. 307 * M-P4-Ms may have either ebx=0xe or 0xf [see above] 308 * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf] 309 * also, M-P4M HTs have ebx=0x8, too 310 * For now, they are distinguished by the model_id 311 * string 312 */ 313 if ((ebx == 0x0e) || 314 (strstr(c->x86_model_id, 315 "Mobile Intel(R) Pentium(R) 4") != NULL)) 316 return SPEEDSTEP_CPU_P4M; 317 break; 318 default: 319 break; 320 } 321 return 0; 322 } 323 324 switch (c->x86_model) { 325 case 0x0B: /* Intel PIII [Tualatin] */ 326 /* cpuid_ebx(1) is 0x04 for desktop PIII, 327 * 0x06 for mobile PIII-M */ 328 ebx = cpuid_ebx(0x00000001); 329 pr_debug("ebx is %x\n", ebx); 330 331 ebx &= 0x000000FF; 332 333 if (ebx != 0x06) 334 return 0; 335 336 /* So far all PIII-M processors support SpeedStep. See 337 * Intel's 24540640.pdf of June 2003 338 */ 339 return SPEEDSTEP_CPU_PIII_T; 340 341 case 0x08: /* Intel PIII [Coppermine] */ 342 343 /* all mobile PIII Coppermines have FSB 100 MHz 344 * ==> sort out a few desktop PIIIs. */ 345 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi); 346 pr_debug("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", 347 msr_lo, msr_hi); 348 msr_lo &= 0x00c0000; 349 if (msr_lo != 0x0080000) 350 return 0; 351 352 /* 353 * If the processor is a mobile version, 354 * platform ID has bit 50 set 355 * it has SpeedStep technology if either 356 * bit 56 or 57 is set 357 */ 358 rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi); 359 pr_debug("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", 360 msr_lo, msr_hi); 361 if ((msr_hi & (1<<18)) && 362 (relaxed_check ? 1 : (msr_hi & (3<<24)))) { 363 if (c->x86_stepping == 0x01) { 364 pr_debug("early PIII version\n"); 365 return SPEEDSTEP_CPU_PIII_C_EARLY; 366 } else 367 return SPEEDSTEP_CPU_PIII_C; 368 } 369 fallthrough; 370 default: 371 return 0; 372 } 373 } 374 EXPORT_SYMBOL_GPL(speedstep_detect_processor); 375 376 377 /********************************************************************* 378 * DETECT SPEEDSTEP SPEEDS * 379 *********************************************************************/ 380 381 unsigned int speedstep_get_freqs(enum speedstep_processor processor, 382 unsigned int *low_speed, 383 unsigned int *high_speed, 384 unsigned int *transition_latency, 385 void (*set_state) (unsigned int state)) 386 { 387 unsigned int prev_speed; 388 unsigned int ret = 0; 389 unsigned long flags; 390 ktime_t tv1, tv2; 391 392 if ((!processor) || (!low_speed) || (!high_speed) || (!set_state)) 393 return -EINVAL; 394 395 pr_debug("trying to determine both speeds\n"); 396 397 /* get current speed */ 398 prev_speed = speedstep_get_frequency(processor); 399 if (!prev_speed) 400 return -EIO; 401 402 pr_debug("previous speed is %u\n", prev_speed); 403 404 preempt_disable(); 405 local_irq_save(flags); 406 407 /* switch to low state */ 408 set_state(SPEEDSTEP_LOW); 409 *low_speed = speedstep_get_frequency(processor); 410 if (!*low_speed) { 411 ret = -EIO; 412 goto out; 413 } 414 415 pr_debug("low speed is %u\n", *low_speed); 416 417 /* start latency measurement */ 418 if (transition_latency) 419 tv1 = ktime_get(); 420 421 /* switch to high state */ 422 set_state(SPEEDSTEP_HIGH); 423 424 /* end latency measurement */ 425 if (transition_latency) 426 tv2 = ktime_get(); 427 428 *high_speed = speedstep_get_frequency(processor); 429 if (!*high_speed) { 430 ret = -EIO; 431 goto out; 432 } 433 434 pr_debug("high speed is %u\n", *high_speed); 435 436 if (*low_speed == *high_speed) { 437 ret = -ENODEV; 438 goto out; 439 } 440 441 /* switch to previous state, if necessary */ 442 if (*high_speed != prev_speed) 443 set_state(SPEEDSTEP_LOW); 444 445 if (transition_latency) { 446 *transition_latency = ktime_to_us(ktime_sub(tv2, tv1)); 447 pr_debug("transition latency is %u uSec\n", *transition_latency); 448 449 /* convert uSec to nSec and add 20% for safety reasons */ 450 *transition_latency *= 1200; 451 452 /* check if the latency measurement is too high or too low 453 * and set it to a safe value (500uSec) in that case 454 */ 455 if (*transition_latency > 10000000 || 456 *transition_latency < 50000) { 457 pr_warn("frequency transition measured seems out of range (%u nSec), falling back to a safe one of %u nSec\n", 458 *transition_latency, 500000); 459 *transition_latency = 500000; 460 } 461 } 462 463 out: 464 local_irq_restore(flags); 465 preempt_enable(); 466 467 return ret; 468 } 469 EXPORT_SYMBOL_GPL(speedstep_get_freqs); 470 471 #ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK 472 module_param(relaxed_check, int, 0444); 473 MODULE_PARM_DESC(relaxed_check, 474 "Don't do all checks for speedstep capability."); 475 #endif 476 477 MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); 478 MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers."); 479 MODULE_LICENSE("GPL"); 480