1 /* 2 * (C) 2001 Dave Jones, Arjan van de ven. 3 * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> 4 * 5 * Licensed under the terms of the GNU GPL License version 2. 6 * Based upon reverse engineered information, and on Intel documentation 7 * for chipsets ICH2-M and ICH3-M. 8 * 9 * Many thanks to Ducrot Bruno for finding and fixing the last 10 * "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler 11 * for extensive testing. 12 * 13 * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* 14 */ 15 16 17 /********************************************************************* 18 * SPEEDSTEP - DEFINITIONS * 19 *********************************************************************/ 20 21 #include <linux/kernel.h> 22 #include <linux/module.h> 23 #include <linux/init.h> 24 #include <linux/cpufreq.h> 25 #include <linux/pci.h> 26 #include <linux/sched.h> 27 28 #include <asm/cpu_device_id.h> 29 30 #include "speedstep-lib.h" 31 32 33 /* speedstep_chipset: 34 * It is necessary to know which chipset is used. As accesses to 35 * this device occur at various places in this module, we need a 36 * static struct pci_dev * pointing to that device. 37 */ 38 static struct pci_dev *speedstep_chipset_dev; 39 40 41 /* speedstep_processor 42 */ 43 static enum speedstep_processor speedstep_processor; 44 45 static u32 pmbase; 46 47 /* 48 * There are only two frequency states for each processor. Values 49 * are in kHz for the time being. 50 */ 51 static struct cpufreq_frequency_table speedstep_freqs[] = { 52 {SPEEDSTEP_HIGH, 0}, 53 {SPEEDSTEP_LOW, 0}, 54 {0, CPUFREQ_TABLE_END}, 55 }; 56 57 58 /** 59 * speedstep_find_register - read the PMBASE address 60 * 61 * Returns: -ENODEV if no register could be found 62 */ 63 static int speedstep_find_register(void) 64 { 65 if (!speedstep_chipset_dev) 66 return -ENODEV; 67 68 /* get PMBASE */ 69 pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase); 70 if (!(pmbase & 0x01)) { 71 printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); 72 return -ENODEV; 73 } 74 75 pmbase &= 0xFFFFFFFE; 76 if (!pmbase) { 77 printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); 78 return -ENODEV; 79 } 80 81 pr_debug("pmbase is 0x%x\n", pmbase); 82 return 0; 83 } 84 85 /** 86 * speedstep_set_state - set the SpeedStep state 87 * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) 88 * 89 * Tries to change the SpeedStep state. Can be called from 90 * smp_call_function_single. 91 */ 92 static void speedstep_set_state(unsigned int state) 93 { 94 u8 pm2_blk; 95 u8 value; 96 unsigned long flags; 97 98 if (state > 0x1) 99 return; 100 101 /* Disable IRQs */ 102 local_irq_save(flags); 103 104 /* read state */ 105 value = inb(pmbase + 0x50); 106 107 pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); 108 109 /* write new state */ 110 value &= 0xFE; 111 value |= state; 112 113 pr_debug("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase); 114 115 /* Disable bus master arbitration */ 116 pm2_blk = inb(pmbase + 0x20); 117 pm2_blk |= 0x01; 118 outb(pm2_blk, (pmbase + 0x20)); 119 120 /* Actual transition */ 121 outb(value, (pmbase + 0x50)); 122 123 /* Restore bus master arbitration */ 124 pm2_blk &= 0xfe; 125 outb(pm2_blk, (pmbase + 0x20)); 126 127 /* check if transition was successful */ 128 value = inb(pmbase + 0x50); 129 130 /* Enable IRQs */ 131 local_irq_restore(flags); 132 133 pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); 134 135 if (state == (value & 0x1)) 136 pr_debug("change to %u MHz succeeded\n", 137 speedstep_get_frequency(speedstep_processor) / 1000); 138 else 139 printk(KERN_ERR "cpufreq: change failed - I/O error\n"); 140 141 return; 142 } 143 144 /* Wrapper for smp_call_function_single. */ 145 static void _speedstep_set_state(void *_state) 146 { 147 speedstep_set_state(*(unsigned int *)_state); 148 } 149 150 /** 151 * speedstep_activate - activate SpeedStep control in the chipset 152 * 153 * Tries to activate the SpeedStep status and control registers. 154 * Returns -EINVAL on an unsupported chipset, and zero on success. 155 */ 156 static int speedstep_activate(void) 157 { 158 u16 value = 0; 159 160 if (!speedstep_chipset_dev) 161 return -EINVAL; 162 163 pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value); 164 if (!(value & 0x08)) { 165 value |= 0x08; 166 pr_debug("activating SpeedStep (TM) registers\n"); 167 pci_write_config_word(speedstep_chipset_dev, 0x00A0, value); 168 } 169 170 return 0; 171 } 172 173 174 /** 175 * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic 176 * 177 * Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to 178 * the LPC bridge / PM module which contains all power-management 179 * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected 180 * chipset, or zero on failure. 181 */ 182 static unsigned int speedstep_detect_chipset(void) 183 { 184 speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, 185 PCI_DEVICE_ID_INTEL_82801DB_12, 186 PCI_ANY_ID, PCI_ANY_ID, 187 NULL); 188 if (speedstep_chipset_dev) 189 return 4; /* 4-M */ 190 191 speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, 192 PCI_DEVICE_ID_INTEL_82801CA_12, 193 PCI_ANY_ID, PCI_ANY_ID, 194 NULL); 195 if (speedstep_chipset_dev) 196 return 3; /* 3-M */ 197 198 199 speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, 200 PCI_DEVICE_ID_INTEL_82801BA_10, 201 PCI_ANY_ID, PCI_ANY_ID, 202 NULL); 203 if (speedstep_chipset_dev) { 204 /* speedstep.c causes lockups on Dell Inspirons 8000 and 205 * 8100 which use a pretty old revision of the 82815 206 * host bridge. Abort on these systems. 207 */ 208 static struct pci_dev *hostbridge; 209 210 hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL, 211 PCI_DEVICE_ID_INTEL_82815_MC, 212 PCI_ANY_ID, PCI_ANY_ID, 213 NULL); 214 215 if (!hostbridge) 216 return 2; /* 2-M */ 217 218 if (hostbridge->revision < 5) { 219 pr_debug("hostbridge does not support speedstep\n"); 220 speedstep_chipset_dev = NULL; 221 pci_dev_put(hostbridge); 222 return 0; 223 } 224 225 pci_dev_put(hostbridge); 226 return 2; /* 2-M */ 227 } 228 229 return 0; 230 } 231 232 static void get_freq_data(void *_speed) 233 { 234 unsigned int *speed = _speed; 235 236 *speed = speedstep_get_frequency(speedstep_processor); 237 } 238 239 static unsigned int speedstep_get(unsigned int cpu) 240 { 241 unsigned int speed; 242 243 /* You're supposed to ensure CPU is online. */ 244 if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0) 245 BUG(); 246 247 pr_debug("detected %u kHz as current frequency\n", speed); 248 return speed; 249 } 250 251 /** 252 * speedstep_target - set a new CPUFreq policy 253 * @policy: new policy 254 * @index: index of target frequency 255 * 256 * Sets a new CPUFreq policy. 257 */ 258 static int speedstep_target(struct cpufreq_policy *policy, unsigned int index) 259 { 260 unsigned int policy_cpu; 261 262 policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); 263 264 smp_call_function_single(policy_cpu, _speedstep_set_state, &index, 265 true); 266 267 return 0; 268 } 269 270 271 struct get_freqs { 272 struct cpufreq_policy *policy; 273 int ret; 274 }; 275 276 static void get_freqs_on_cpu(void *_get_freqs) 277 { 278 struct get_freqs *get_freqs = _get_freqs; 279 280 get_freqs->ret = 281 speedstep_get_freqs(speedstep_processor, 282 &speedstep_freqs[SPEEDSTEP_LOW].frequency, 283 &speedstep_freqs[SPEEDSTEP_HIGH].frequency, 284 &get_freqs->policy->cpuinfo.transition_latency, 285 &speedstep_set_state); 286 } 287 288 static int speedstep_cpu_init(struct cpufreq_policy *policy) 289 { 290 unsigned int policy_cpu; 291 struct get_freqs gf; 292 293 /* only run on CPU to be set, or on its sibling */ 294 #ifdef CONFIG_SMP 295 cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); 296 #endif 297 policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); 298 299 /* detect low and high frequency and transition latency */ 300 gf.policy = policy; 301 smp_call_function_single(policy_cpu, get_freqs_on_cpu, &gf, 1); 302 if (gf.ret) 303 return gf.ret; 304 305 return cpufreq_table_validate_and_show(policy, speedstep_freqs); 306 } 307 308 309 static struct cpufreq_driver speedstep_driver = { 310 .name = "speedstep-ich", 311 .verify = cpufreq_generic_frequency_table_verify, 312 .target_index = speedstep_target, 313 .init = speedstep_cpu_init, 314 .exit = cpufreq_generic_exit, 315 .get = speedstep_get, 316 .attr = cpufreq_generic_attr, 317 }; 318 319 static const struct x86_cpu_id ss_smi_ids[] = { 320 { X86_VENDOR_INTEL, 6, 0xb, }, 321 { X86_VENDOR_INTEL, 6, 0x8, }, 322 { X86_VENDOR_INTEL, 15, 2 }, 323 {} 324 }; 325 #if 0 326 /* Autoload or not? Do not for now. */ 327 MODULE_DEVICE_TABLE(x86cpu, ss_smi_ids); 328 #endif 329 330 /** 331 * speedstep_init - initializes the SpeedStep CPUFreq driver 332 * 333 * Initializes the SpeedStep support. Returns -ENODEV on unsupported 334 * devices, -EINVAL on problems during initiatization, and zero on 335 * success. 336 */ 337 static int __init speedstep_init(void) 338 { 339 if (!x86_match_cpu(ss_smi_ids)) 340 return -ENODEV; 341 342 /* detect processor */ 343 speedstep_processor = speedstep_detect_processor(); 344 if (!speedstep_processor) { 345 pr_debug("Intel(R) SpeedStep(TM) capable processor " 346 "not found\n"); 347 return -ENODEV; 348 } 349 350 /* detect chipset */ 351 if (!speedstep_detect_chipset()) { 352 pr_debug("Intel(R) SpeedStep(TM) for this chipset not " 353 "(yet) available.\n"); 354 return -ENODEV; 355 } 356 357 /* activate speedstep support */ 358 if (speedstep_activate()) { 359 pci_dev_put(speedstep_chipset_dev); 360 return -EINVAL; 361 } 362 363 if (speedstep_find_register()) 364 return -ENODEV; 365 366 return cpufreq_register_driver(&speedstep_driver); 367 } 368 369 370 /** 371 * speedstep_exit - unregisters SpeedStep support 372 * 373 * Unregisters SpeedStep support. 374 */ 375 static void __exit speedstep_exit(void) 376 { 377 pci_dev_put(speedstep_chipset_dev); 378 cpufreq_unregister_driver(&speedstep_driver); 379 } 380 381 382 MODULE_AUTHOR("Dave Jones <davej@redhat.com>, " 383 "Dominik Brodowski <linux@brodo.de>"); 384 MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets " 385 "with ICH-M southbridges."); 386 MODULE_LICENSE("GPL"); 387 388 module_init(speedstep_init); 389 module_exit(speedstep_exit); 390