1 /* 2 * Copyright (c) 2010 Samsung Electronics Co., Ltd. 3 * http://www.samsung.com 4 * 5 * CPU frequency scaling for S5PC110/S5PV210 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 */ 11 12 #include <linux/types.h> 13 #include <linux/kernel.h> 14 #include <linux/init.h> 15 #include <linux/err.h> 16 #include <linux/clk.h> 17 #include <linux/io.h> 18 #include <linux/cpufreq.h> 19 #include <linux/reboot.h> 20 #include <linux/regulator/consumer.h> 21 #include <linux/suspend.h> 22 23 #include <mach/map.h> 24 #include <mach/regs-clock.h> 25 26 static struct clk *cpu_clk; 27 static struct clk *dmc0_clk; 28 static struct clk *dmc1_clk; 29 static struct cpufreq_freqs freqs; 30 static DEFINE_MUTEX(set_freq_lock); 31 32 /* APLL M,P,S values for 1G/800Mhz */ 33 #define APLL_VAL_1000 ((1 << 31) | (125 << 16) | (3 << 8) | 1) 34 #define APLL_VAL_800 ((1 << 31) | (100 << 16) | (3 << 8) | 1) 35 36 /* Use 800MHz when entering sleep mode */ 37 #define SLEEP_FREQ (800 * 1000) 38 39 /* 40 * relation has an additional symantics other than the standard of cpufreq 41 * DISALBE_FURTHER_CPUFREQ: disable further access to target 42 * ENABLE_FURTUER_CPUFREQ: enable access to target 43 */ 44 enum cpufreq_access { 45 DISABLE_FURTHER_CPUFREQ = 0x10, 46 ENABLE_FURTHER_CPUFREQ = 0x20, 47 }; 48 49 static bool no_cpufreq_access; 50 51 /* 52 * DRAM configurations to calculate refresh counter for changing 53 * frequency of memory. 54 */ 55 struct dram_conf { 56 unsigned long freq; /* HZ */ 57 unsigned long refresh; /* DRAM refresh counter * 1000 */ 58 }; 59 60 /* DRAM configuration (DMC0 and DMC1) */ 61 static struct dram_conf s5pv210_dram_conf[2]; 62 63 enum perf_level { 64 L0, L1, L2, L3, L4, 65 }; 66 67 enum s5pv210_mem_type { 68 LPDDR = 0x1, 69 LPDDR2 = 0x2, 70 DDR2 = 0x4, 71 }; 72 73 enum s5pv210_dmc_port { 74 DMC0 = 0, 75 DMC1, 76 }; 77 78 static struct cpufreq_frequency_table s5pv210_freq_table[] = { 79 {L0, 1000*1000}, 80 {L1, 800*1000}, 81 {L2, 400*1000}, 82 {L3, 200*1000}, 83 {L4, 100*1000}, 84 {0, CPUFREQ_TABLE_END}, 85 }; 86 87 static struct regulator *arm_regulator; 88 static struct regulator *int_regulator; 89 90 struct s5pv210_dvs_conf { 91 int arm_volt; /* uV */ 92 int int_volt; /* uV */ 93 }; 94 95 static const int arm_volt_max = 1350000; 96 static const int int_volt_max = 1250000; 97 98 static struct s5pv210_dvs_conf dvs_conf[] = { 99 [L0] = { 100 .arm_volt = 1250000, 101 .int_volt = 1100000, 102 }, 103 [L1] = { 104 .arm_volt = 1200000, 105 .int_volt = 1100000, 106 }, 107 [L2] = { 108 .arm_volt = 1050000, 109 .int_volt = 1100000, 110 }, 111 [L3] = { 112 .arm_volt = 950000, 113 .int_volt = 1100000, 114 }, 115 [L4] = { 116 .arm_volt = 950000, 117 .int_volt = 1000000, 118 }, 119 }; 120 121 static u32 clkdiv_val[5][11] = { 122 /* 123 * Clock divider value for following 124 * { APLL, A2M, HCLK_MSYS, PCLK_MSYS, 125 * HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS, 126 * ONEDRAM, MFC, G3D } 127 */ 128 129 /* L0 : [1000/200/100][166/83][133/66][200/200] */ 130 {0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0}, 131 132 /* L1 : [800/200/100][166/83][133/66][200/200] */ 133 {0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0}, 134 135 /* L2 : [400/200/100][166/83][133/66][200/200] */ 136 {1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, 137 138 /* L3 : [200/200/100][166/83][133/66][200/200] */ 139 {3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, 140 141 /* L4 : [100/100/100][83/83][66/66][100/100] */ 142 {7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0}, 143 }; 144 145 /* 146 * This function set DRAM refresh counter 147 * accoriding to operating frequency of DRAM 148 * ch: DMC port number 0 or 1 149 * freq: Operating frequency of DRAM(KHz) 150 */ 151 static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) 152 { 153 unsigned long tmp, tmp1; 154 void __iomem *reg = NULL; 155 156 if (ch == DMC0) { 157 reg = (S5P_VA_DMC0 + 0x30); 158 } else if (ch == DMC1) { 159 reg = (S5P_VA_DMC1 + 0x30); 160 } else { 161 printk(KERN_ERR "Cannot find DMC port\n"); 162 return; 163 } 164 165 /* Find current DRAM frequency */ 166 tmp = s5pv210_dram_conf[ch].freq; 167 168 do_div(tmp, freq); 169 170 tmp1 = s5pv210_dram_conf[ch].refresh; 171 172 do_div(tmp1, tmp); 173 174 __raw_writel(tmp1, reg); 175 } 176 177 static int s5pv210_verify_speed(struct cpufreq_policy *policy) 178 { 179 if (policy->cpu) 180 return -EINVAL; 181 182 return cpufreq_frequency_table_verify(policy, s5pv210_freq_table); 183 } 184 185 static unsigned int s5pv210_getspeed(unsigned int cpu) 186 { 187 if (cpu) 188 return 0; 189 190 return clk_get_rate(cpu_clk) / 1000; 191 } 192 193 static int s5pv210_target(struct cpufreq_policy *policy, 194 unsigned int target_freq, 195 unsigned int relation) 196 { 197 unsigned long reg; 198 unsigned int index, priv_index; 199 unsigned int pll_changing = 0; 200 unsigned int bus_speed_changing = 0; 201 int arm_volt, int_volt; 202 int ret = 0; 203 204 mutex_lock(&set_freq_lock); 205 206 if (relation & ENABLE_FURTHER_CPUFREQ) 207 no_cpufreq_access = false; 208 209 if (no_cpufreq_access) { 210 #ifdef CONFIG_PM_VERBOSE 211 pr_err("%s:%d denied access to %s as it is disabled" 212 "temporarily\n", __FILE__, __LINE__, __func__); 213 #endif 214 ret = -EINVAL; 215 goto exit; 216 } 217 218 if (relation & DISABLE_FURTHER_CPUFREQ) 219 no_cpufreq_access = true; 220 221 relation &= ~(ENABLE_FURTHER_CPUFREQ | DISABLE_FURTHER_CPUFREQ); 222 223 freqs.old = s5pv210_getspeed(0); 224 225 if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, 226 target_freq, relation, &index)) { 227 ret = -EINVAL; 228 goto exit; 229 } 230 231 freqs.new = s5pv210_freq_table[index].frequency; 232 freqs.cpu = 0; 233 234 if (freqs.new == freqs.old) 235 goto exit; 236 237 /* Finding current running level index */ 238 if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, 239 freqs.old, relation, &priv_index)) { 240 ret = -EINVAL; 241 goto exit; 242 } 243 244 arm_volt = dvs_conf[index].arm_volt; 245 int_volt = dvs_conf[index].int_volt; 246 247 if (freqs.new > freqs.old) { 248 ret = regulator_set_voltage(arm_regulator, 249 arm_volt, arm_volt_max); 250 if (ret) 251 goto exit; 252 253 ret = regulator_set_voltage(int_regulator, 254 int_volt, int_volt_max); 255 if (ret) 256 goto exit; 257 } 258 259 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); 260 261 /* Check if there need to change PLL */ 262 if ((index == L0) || (priv_index == L0)) 263 pll_changing = 1; 264 265 /* Check if there need to change System bus clock */ 266 if ((index == L4) || (priv_index == L4)) 267 bus_speed_changing = 1; 268 269 if (bus_speed_changing) { 270 /* 271 * Reconfigure DRAM refresh counter value for minimum 272 * temporary clock while changing divider. 273 * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287 274 */ 275 if (pll_changing) 276 s5pv210_set_refresh(DMC1, 83000); 277 else 278 s5pv210_set_refresh(DMC1, 100000); 279 280 s5pv210_set_refresh(DMC0, 83000); 281 } 282 283 /* 284 * APLL should be changed in this level 285 * APLL -> MPLL(for stable transition) -> APLL 286 * Some clock source's clock API are not prepared. 287 * Do not use clock API in below code. 288 */ 289 if (pll_changing) { 290 /* 291 * 1. Temporary Change divider for MFC and G3D 292 * SCLKA2M(200/1=200)->(200/4=50)Mhz 293 */ 294 reg = __raw_readl(S5P_CLK_DIV2); 295 reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); 296 reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) | 297 (3 << S5P_CLKDIV2_MFC_SHIFT); 298 __raw_writel(reg, S5P_CLK_DIV2); 299 300 /* For MFC, G3D dividing */ 301 do { 302 reg = __raw_readl(S5P_CLKDIV_STAT0); 303 } while (reg & ((1 << 16) | (1 << 17))); 304 305 /* 306 * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX 307 * (200/4=50)->(667/4=166)Mhz 308 */ 309 reg = __raw_readl(S5P_CLK_SRC2); 310 reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); 311 reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) | 312 (1 << S5P_CLKSRC2_MFC_SHIFT); 313 __raw_writel(reg, S5P_CLK_SRC2); 314 315 do { 316 reg = __raw_readl(S5P_CLKMUX_STAT1); 317 } while (reg & ((1 << 7) | (1 << 3))); 318 319 /* 320 * 3. DMC1 refresh count for 133Mhz if (index == L4) is 321 * true refresh counter is already programed in upper 322 * code. 0x287@83Mhz 323 */ 324 if (!bus_speed_changing) 325 s5pv210_set_refresh(DMC1, 133000); 326 327 /* 4. SCLKAPLL -> SCLKMPLL */ 328 reg = __raw_readl(S5P_CLK_SRC0); 329 reg &= ~(S5P_CLKSRC0_MUX200_MASK); 330 reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT); 331 __raw_writel(reg, S5P_CLK_SRC0); 332 333 do { 334 reg = __raw_readl(S5P_CLKMUX_STAT0); 335 } while (reg & (0x1 << 18)); 336 337 } 338 339 /* Change divider */ 340 reg = __raw_readl(S5P_CLK_DIV0); 341 342 reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK | 343 S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK | 344 S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK | 345 S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK); 346 347 reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) | 348 (clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) | 349 (clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) | 350 (clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) | 351 (clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) | 352 (clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) | 353 (clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) | 354 (clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT)); 355 356 __raw_writel(reg, S5P_CLK_DIV0); 357 358 do { 359 reg = __raw_readl(S5P_CLKDIV_STAT0); 360 } while (reg & 0xff); 361 362 /* ARM MCS value changed */ 363 reg = __raw_readl(S5P_ARM_MCS_CON); 364 reg &= ~0x3; 365 if (index >= L3) 366 reg |= 0x3; 367 else 368 reg |= 0x1; 369 370 __raw_writel(reg, S5P_ARM_MCS_CON); 371 372 if (pll_changing) { 373 /* 5. Set Lock time = 30us*24Mhz = 0x2cf */ 374 __raw_writel(0x2cf, S5P_APLL_LOCK); 375 376 /* 377 * 6. Turn on APLL 378 * 6-1. Set PMS values 379 * 6-2. Wait untile the PLL is locked 380 */ 381 if (index == L0) 382 __raw_writel(APLL_VAL_1000, S5P_APLL_CON); 383 else 384 __raw_writel(APLL_VAL_800, S5P_APLL_CON); 385 386 do { 387 reg = __raw_readl(S5P_APLL_CON); 388 } while (!(reg & (0x1 << 29))); 389 390 /* 391 * 7. Change souce clock from SCLKMPLL(667Mhz) 392 * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX 393 * (667/4=166)->(200/4=50)Mhz 394 */ 395 reg = __raw_readl(S5P_CLK_SRC2); 396 reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); 397 reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) | 398 (0 << S5P_CLKSRC2_MFC_SHIFT); 399 __raw_writel(reg, S5P_CLK_SRC2); 400 401 do { 402 reg = __raw_readl(S5P_CLKMUX_STAT1); 403 } while (reg & ((1 << 7) | (1 << 3))); 404 405 /* 406 * 8. Change divider for MFC and G3D 407 * (200/4=50)->(200/1=200)Mhz 408 */ 409 reg = __raw_readl(S5P_CLK_DIV2); 410 reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); 411 reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) | 412 (clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT); 413 __raw_writel(reg, S5P_CLK_DIV2); 414 415 /* For MFC, G3D dividing */ 416 do { 417 reg = __raw_readl(S5P_CLKDIV_STAT0); 418 } while (reg & ((1 << 16) | (1 << 17))); 419 420 /* 9. Change MPLL to APLL in MSYS_MUX */ 421 reg = __raw_readl(S5P_CLK_SRC0); 422 reg &= ~(S5P_CLKSRC0_MUX200_MASK); 423 reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT); 424 __raw_writel(reg, S5P_CLK_SRC0); 425 426 do { 427 reg = __raw_readl(S5P_CLKMUX_STAT0); 428 } while (reg & (0x1 << 18)); 429 430 /* 431 * 10. DMC1 refresh counter 432 * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c 433 * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618 434 */ 435 if (!bus_speed_changing) 436 s5pv210_set_refresh(DMC1, 200000); 437 } 438 439 /* 440 * L4 level need to change memory bus speed, hence onedram clock divier 441 * and memory refresh parameter should be changed 442 */ 443 if (bus_speed_changing) { 444 reg = __raw_readl(S5P_CLK_DIV6); 445 reg &= ~S5P_CLKDIV6_ONEDRAM_MASK; 446 reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT); 447 __raw_writel(reg, S5P_CLK_DIV6); 448 449 do { 450 reg = __raw_readl(S5P_CLKDIV_STAT1); 451 } while (reg & (1 << 15)); 452 453 /* Reconfigure DRAM refresh counter value */ 454 if (index != L4) { 455 /* 456 * DMC0 : 166Mhz 457 * DMC1 : 200Mhz 458 */ 459 s5pv210_set_refresh(DMC0, 166000); 460 s5pv210_set_refresh(DMC1, 200000); 461 } else { 462 /* 463 * DMC0 : 83Mhz 464 * DMC1 : 100Mhz 465 */ 466 s5pv210_set_refresh(DMC0, 83000); 467 s5pv210_set_refresh(DMC1, 100000); 468 } 469 } 470 471 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); 472 473 if (freqs.new < freqs.old) { 474 regulator_set_voltage(int_regulator, 475 int_volt, int_volt_max); 476 477 regulator_set_voltage(arm_regulator, 478 arm_volt, arm_volt_max); 479 } 480 481 printk(KERN_DEBUG "Perf changed[L%d]\n", index); 482 483 exit: 484 mutex_unlock(&set_freq_lock); 485 return ret; 486 } 487 488 #ifdef CONFIG_PM 489 static int s5pv210_cpufreq_suspend(struct cpufreq_policy *policy) 490 { 491 return 0; 492 } 493 494 static int s5pv210_cpufreq_resume(struct cpufreq_policy *policy) 495 { 496 return 0; 497 } 498 #endif 499 500 static int check_mem_type(void __iomem *dmc_reg) 501 { 502 unsigned long val; 503 504 val = __raw_readl(dmc_reg + 0x4); 505 val = (val & (0xf << 8)); 506 507 return val >> 8; 508 } 509 510 static int __init s5pv210_cpu_init(struct cpufreq_policy *policy) 511 { 512 unsigned long mem_type; 513 int ret; 514 515 cpu_clk = clk_get(NULL, "armclk"); 516 if (IS_ERR(cpu_clk)) 517 return PTR_ERR(cpu_clk); 518 519 dmc0_clk = clk_get(NULL, "sclk_dmc0"); 520 if (IS_ERR(dmc0_clk)) { 521 ret = PTR_ERR(dmc0_clk); 522 goto out_dmc0; 523 } 524 525 dmc1_clk = clk_get(NULL, "hclk_msys"); 526 if (IS_ERR(dmc1_clk)) { 527 ret = PTR_ERR(dmc1_clk); 528 goto out_dmc1; 529 } 530 531 if (policy->cpu != 0) { 532 ret = -EINVAL; 533 goto out_dmc1; 534 } 535 536 /* 537 * check_mem_type : This driver only support LPDDR & LPDDR2. 538 * other memory type is not supported. 539 */ 540 mem_type = check_mem_type(S5P_VA_DMC0); 541 542 if ((mem_type != LPDDR) && (mem_type != LPDDR2)) { 543 printk(KERN_ERR "CPUFreq doesn't support this memory type\n"); 544 ret = -EINVAL; 545 goto out_dmc1; 546 } 547 548 /* Find current refresh counter and frequency each DMC */ 549 s5pv210_dram_conf[0].refresh = (__raw_readl(S5P_VA_DMC0 + 0x30) * 1000); 550 s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk); 551 552 s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000); 553 s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk); 554 555 policy->cur = policy->min = policy->max = s5pv210_getspeed(0); 556 557 cpufreq_frequency_table_get_attr(s5pv210_freq_table, policy->cpu); 558 559 policy->cpuinfo.transition_latency = 40000; 560 561 return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table); 562 563 out_dmc1: 564 clk_put(dmc0_clk); 565 out_dmc0: 566 clk_put(cpu_clk); 567 return ret; 568 } 569 570 static int s5pv210_cpufreq_notifier_event(struct notifier_block *this, 571 unsigned long event, void *ptr) 572 { 573 int ret; 574 575 switch (event) { 576 case PM_SUSPEND_PREPARE: 577 ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, 578 DISABLE_FURTHER_CPUFREQ); 579 if (ret < 0) 580 return NOTIFY_BAD; 581 582 return NOTIFY_OK; 583 case PM_POST_RESTORE: 584 case PM_POST_SUSPEND: 585 cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, 586 ENABLE_FURTHER_CPUFREQ); 587 588 return NOTIFY_OK; 589 } 590 591 return NOTIFY_DONE; 592 } 593 594 static int s5pv210_cpufreq_reboot_notifier_event(struct notifier_block *this, 595 unsigned long event, void *ptr) 596 { 597 int ret; 598 599 ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, 600 DISABLE_FURTHER_CPUFREQ); 601 if (ret < 0) 602 return NOTIFY_BAD; 603 604 return NOTIFY_DONE; 605 } 606 607 static struct cpufreq_driver s5pv210_driver = { 608 .flags = CPUFREQ_STICKY, 609 .verify = s5pv210_verify_speed, 610 .target = s5pv210_target, 611 .get = s5pv210_getspeed, 612 .init = s5pv210_cpu_init, 613 .name = "s5pv210", 614 #ifdef CONFIG_PM 615 .suspend = s5pv210_cpufreq_suspend, 616 .resume = s5pv210_cpufreq_resume, 617 #endif 618 }; 619 620 static struct notifier_block s5pv210_cpufreq_notifier = { 621 .notifier_call = s5pv210_cpufreq_notifier_event, 622 }; 623 624 static struct notifier_block s5pv210_cpufreq_reboot_notifier = { 625 .notifier_call = s5pv210_cpufreq_reboot_notifier_event, 626 }; 627 628 static int __init s5pv210_cpufreq_init(void) 629 { 630 arm_regulator = regulator_get(NULL, "vddarm"); 631 if (IS_ERR(arm_regulator)) { 632 pr_err("failed to get regulator vddarm"); 633 return PTR_ERR(arm_regulator); 634 } 635 636 int_regulator = regulator_get(NULL, "vddint"); 637 if (IS_ERR(int_regulator)) { 638 pr_err("failed to get regulator vddint"); 639 regulator_put(arm_regulator); 640 return PTR_ERR(int_regulator); 641 } 642 643 register_pm_notifier(&s5pv210_cpufreq_notifier); 644 register_reboot_notifier(&s5pv210_cpufreq_reboot_notifier); 645 646 return cpufreq_register_driver(&s5pv210_driver); 647 } 648 649 late_initcall(s5pv210_cpufreq_init); 650