1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (c) 2018, The Linux Foundation. All rights reserved. 4 */ 5 6 #include <linux/bitfield.h> 7 #include <linux/clk-provider.h> 8 #include <linux/cpufreq.h> 9 #include <linux/init.h> 10 #include <linux/interconnect.h> 11 #include <linux/interrupt.h> 12 #include <linux/kernel.h> 13 #include <linux/module.h> 14 #include <linux/of_address.h> 15 #include <linux/of_platform.h> 16 #include <linux/pm_opp.h> 17 #include <linux/pm_qos.h> 18 #include <linux/slab.h> 19 #include <linux/spinlock.h> 20 #include <linux/units.h> 21 22 #define LUT_MAX_ENTRIES 40U 23 #define LUT_SRC GENMASK(31, 30) 24 #define LUT_L_VAL GENMASK(7, 0) 25 #define LUT_CORE_COUNT GENMASK(18, 16) 26 #define LUT_VOLT GENMASK(11, 0) 27 #define CLK_HW_DIV 2 28 #define LUT_TURBO_IND 1 29 30 #define GT_IRQ_STATUS BIT(2) 31 32 struct qcom_cpufreq_soc_data { 33 u32 reg_enable; 34 u32 reg_domain_state; 35 u32 reg_dcvs_ctrl; 36 u32 reg_freq_lut; 37 u32 reg_volt_lut; 38 u32 reg_intr_clr; 39 u32 reg_current_vote; 40 u32 reg_perf_state; 41 u8 lut_row_size; 42 }; 43 44 struct qcom_cpufreq_data { 45 void __iomem *base; 46 struct resource *res; 47 48 /* 49 * Mutex to synchronize between de-init sequence and re-starting LMh 50 * polling/interrupts 51 */ 52 struct mutex throttle_lock; 53 int throttle_irq; 54 char irq_name[15]; 55 bool cancel_throttle; 56 struct delayed_work throttle_work; 57 struct cpufreq_policy *policy; 58 struct clk_hw cpu_clk; 59 60 bool per_core_dcvs; 61 62 struct freq_qos_request throttle_freq_req; 63 }; 64 65 static struct { 66 struct qcom_cpufreq_data *data; 67 const struct qcom_cpufreq_soc_data *soc_data; 68 } qcom_cpufreq; 69 70 static unsigned long cpu_hw_rate, xo_rate; 71 static bool icc_scaling_enabled; 72 73 static int qcom_cpufreq_set_bw(struct cpufreq_policy *policy, 74 unsigned long freq_khz) 75 { 76 unsigned long freq_hz = freq_khz * 1000; 77 struct dev_pm_opp *opp; 78 struct device *dev; 79 int ret; 80 81 dev = get_cpu_device(policy->cpu); 82 if (!dev) 83 return -ENODEV; 84 85 opp = dev_pm_opp_find_freq_exact(dev, freq_hz, true); 86 if (IS_ERR(opp)) 87 return PTR_ERR(opp); 88 89 ret = dev_pm_opp_set_opp(dev, opp); 90 dev_pm_opp_put(opp); 91 return ret; 92 } 93 94 static int qcom_cpufreq_update_opp(struct device *cpu_dev, 95 unsigned long freq_khz, 96 unsigned long volt) 97 { 98 unsigned long freq_hz = freq_khz * 1000; 99 int ret; 100 101 /* Skip voltage update if the opp table is not available */ 102 if (!icc_scaling_enabled) 103 return dev_pm_opp_add(cpu_dev, freq_hz, volt); 104 105 ret = dev_pm_opp_adjust_voltage(cpu_dev, freq_hz, volt, volt, volt); 106 if (ret) { 107 dev_err(cpu_dev, "Voltage update failed freq=%ld\n", freq_khz); 108 return ret; 109 } 110 111 return dev_pm_opp_enable(cpu_dev, freq_hz); 112 } 113 114 static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy, 115 unsigned int index) 116 { 117 struct qcom_cpufreq_data *data = policy->driver_data; 118 const struct qcom_cpufreq_soc_data *soc_data = qcom_cpufreq.soc_data; 119 unsigned long freq = policy->freq_table[index].frequency; 120 unsigned int i; 121 122 writel_relaxed(index, data->base + soc_data->reg_perf_state); 123 124 if (data->per_core_dcvs) 125 for (i = 1; i < cpumask_weight(policy->related_cpus); i++) 126 writel_relaxed(index, data->base + soc_data->reg_perf_state + i * 4); 127 128 if (icc_scaling_enabled) 129 qcom_cpufreq_set_bw(policy, freq); 130 131 return 0; 132 } 133 134 static unsigned long qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data) 135 { 136 unsigned int lval; 137 138 if (qcom_cpufreq.soc_data->reg_current_vote) 139 lval = readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_current_vote) & 0x3ff; 140 else 141 lval = readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_domain_state) & 0xff; 142 143 return lval * xo_rate; 144 } 145 146 /* Get the current frequency of the CPU (after throttling) */ 147 static unsigned int qcom_cpufreq_hw_get(unsigned int cpu) 148 { 149 struct qcom_cpufreq_data *data; 150 struct cpufreq_policy *policy; 151 152 policy = cpufreq_cpu_get_raw(cpu); 153 if (!policy) 154 return 0; 155 156 data = policy->driver_data; 157 158 return qcom_lmh_get_throttle_freq(data) / HZ_PER_KHZ; 159 } 160 161 /* Get the frequency requested by the cpufreq core for the CPU */ 162 static unsigned int qcom_cpufreq_get_freq(unsigned int cpu) 163 { 164 struct qcom_cpufreq_data *data; 165 const struct qcom_cpufreq_soc_data *soc_data; 166 struct cpufreq_policy *policy; 167 unsigned int index; 168 169 policy = cpufreq_cpu_get_raw(cpu); 170 if (!policy) 171 return 0; 172 173 data = policy->driver_data; 174 soc_data = qcom_cpufreq.soc_data; 175 176 index = readl_relaxed(data->base + soc_data->reg_perf_state); 177 index = min(index, LUT_MAX_ENTRIES - 1); 178 179 return policy->freq_table[index].frequency; 180 } 181 182 static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, 183 unsigned int target_freq) 184 { 185 struct qcom_cpufreq_data *data = policy->driver_data; 186 const struct qcom_cpufreq_soc_data *soc_data = qcom_cpufreq.soc_data; 187 unsigned int index; 188 unsigned int i; 189 190 index = policy->cached_resolved_idx; 191 writel_relaxed(index, data->base + soc_data->reg_perf_state); 192 193 if (data->per_core_dcvs) 194 for (i = 1; i < cpumask_weight(policy->related_cpus); i++) 195 writel_relaxed(index, data->base + soc_data->reg_perf_state + i * 4); 196 197 return policy->freq_table[index].frequency; 198 } 199 200 static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, 201 struct cpufreq_policy *policy) 202 { 203 u32 data, src, lval, i, core_count, prev_freq = 0, freq; 204 u32 volt; 205 struct cpufreq_frequency_table *table; 206 struct dev_pm_opp *opp; 207 unsigned long rate; 208 int ret; 209 struct qcom_cpufreq_data *drv_data = policy->driver_data; 210 const struct qcom_cpufreq_soc_data *soc_data = qcom_cpufreq.soc_data; 211 212 table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL); 213 if (!table) 214 return -ENOMEM; 215 216 ret = dev_pm_opp_of_add_table(cpu_dev); 217 if (!ret) { 218 /* Disable all opps and cross-validate against LUT later */ 219 icc_scaling_enabled = true; 220 for (rate = 0; ; rate++) { 221 opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate); 222 if (IS_ERR(opp)) 223 break; 224 225 dev_pm_opp_put(opp); 226 dev_pm_opp_disable(cpu_dev, rate); 227 } 228 } else if (ret != -ENODEV) { 229 dev_err(cpu_dev, "Invalid opp table in device tree\n"); 230 kfree(table); 231 return ret; 232 } else { 233 policy->fast_switch_possible = true; 234 icc_scaling_enabled = false; 235 } 236 237 for (i = 0; i < LUT_MAX_ENTRIES; i++) { 238 data = readl_relaxed(drv_data->base + soc_data->reg_freq_lut + 239 i * soc_data->lut_row_size); 240 src = FIELD_GET(LUT_SRC, data); 241 lval = FIELD_GET(LUT_L_VAL, data); 242 core_count = FIELD_GET(LUT_CORE_COUNT, data); 243 244 data = readl_relaxed(drv_data->base + soc_data->reg_volt_lut + 245 i * soc_data->lut_row_size); 246 volt = FIELD_GET(LUT_VOLT, data) * 1000; 247 248 if (src) 249 freq = xo_rate * lval / 1000; 250 else 251 freq = cpu_hw_rate / 1000; 252 253 if (freq != prev_freq && core_count != LUT_TURBO_IND) { 254 if (!qcom_cpufreq_update_opp(cpu_dev, freq, volt)) { 255 table[i].frequency = freq; 256 dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i, 257 freq, core_count); 258 } else { 259 dev_warn(cpu_dev, "failed to update OPP for freq=%d\n", freq); 260 table[i].frequency = CPUFREQ_ENTRY_INVALID; 261 } 262 263 } else if (core_count == LUT_TURBO_IND) { 264 table[i].frequency = CPUFREQ_ENTRY_INVALID; 265 } 266 267 /* 268 * Two of the same frequencies with the same core counts means 269 * end of table 270 */ 271 if (i > 0 && prev_freq == freq) { 272 struct cpufreq_frequency_table *prev = &table[i - 1]; 273 274 /* 275 * Only treat the last frequency that might be a boost 276 * as the boost frequency 277 */ 278 if (prev->frequency == CPUFREQ_ENTRY_INVALID) { 279 if (!qcom_cpufreq_update_opp(cpu_dev, prev_freq, volt)) { 280 prev->frequency = prev_freq; 281 prev->flags = CPUFREQ_BOOST_FREQ; 282 } else { 283 dev_warn(cpu_dev, "failed to update OPP for freq=%d\n", 284 freq); 285 } 286 } 287 288 break; 289 } 290 291 prev_freq = freq; 292 } 293 294 table[i].frequency = CPUFREQ_TABLE_END; 295 policy->freq_table = table; 296 dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); 297 298 return 0; 299 } 300 301 static void qcom_get_related_cpus(int index, struct cpumask *m) 302 { 303 struct device_node *cpu_np; 304 struct of_phandle_args args; 305 int cpu, ret; 306 307 for_each_possible_cpu(cpu) { 308 cpu_np = of_cpu_device_node_get(cpu); 309 if (!cpu_np) 310 continue; 311 312 ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain", 313 "#freq-domain-cells", 0, 314 &args); 315 of_node_put(cpu_np); 316 if (ret < 0) 317 continue; 318 319 if (index == args.args[0]) 320 cpumask_set_cpu(cpu, m); 321 } 322 } 323 324 static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data) 325 { 326 struct cpufreq_policy *policy = data->policy; 327 int cpu = cpumask_first(policy->related_cpus); 328 struct device *dev = get_cpu_device(cpu); 329 unsigned long freq_hz, throttled_freq; 330 struct dev_pm_opp *opp; 331 332 /* 333 * Get the h/w throttled frequency, normalize it using the 334 * registered opp table and use it to calculate thermal pressure. 335 */ 336 freq_hz = qcom_lmh_get_throttle_freq(data); 337 338 opp = dev_pm_opp_find_freq_floor(dev, &freq_hz); 339 if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE) 340 opp = dev_pm_opp_find_freq_ceil(dev, &freq_hz); 341 342 if (IS_ERR(opp)) { 343 dev_warn(dev, "Can't find the OPP for throttling: %pe!\n", opp); 344 } else { 345 dev_pm_opp_put(opp); 346 } 347 348 throttled_freq = freq_hz / HZ_PER_KHZ; 349 350 freq_qos_update_request(&data->throttle_freq_req, throttled_freq); 351 352 /* Update thermal pressure (the boost frequencies are accepted) */ 353 arch_update_thermal_pressure(policy->related_cpus, throttled_freq); 354 355 /* 356 * In the unlikely case policy is unregistered do not enable 357 * polling or h/w interrupt 358 */ 359 mutex_lock(&data->throttle_lock); 360 if (data->cancel_throttle) 361 goto out; 362 363 /* 364 * If h/w throttled frequency is higher than what cpufreq has requested 365 * for, then stop polling and switch back to interrupt mechanism. 366 */ 367 if (throttled_freq >= qcom_cpufreq_get_freq(cpu)) 368 enable_irq(data->throttle_irq); 369 else 370 mod_delayed_work(system_highpri_wq, &data->throttle_work, 371 msecs_to_jiffies(10)); 372 373 out: 374 mutex_unlock(&data->throttle_lock); 375 } 376 377 static void qcom_lmh_dcvs_poll(struct work_struct *work) 378 { 379 struct qcom_cpufreq_data *data; 380 381 data = container_of(work, struct qcom_cpufreq_data, throttle_work.work); 382 qcom_lmh_dcvs_notify(data); 383 } 384 385 static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data) 386 { 387 struct qcom_cpufreq_data *c_data = data; 388 389 /* Disable interrupt and enable polling */ 390 disable_irq_nosync(c_data->throttle_irq); 391 schedule_delayed_work(&c_data->throttle_work, 0); 392 393 if (qcom_cpufreq.soc_data->reg_intr_clr) 394 writel_relaxed(GT_IRQ_STATUS, 395 c_data->base + qcom_cpufreq.soc_data->reg_intr_clr); 396 397 return IRQ_HANDLED; 398 } 399 400 static const struct qcom_cpufreq_soc_data qcom_soc_data = { 401 .reg_enable = 0x0, 402 .reg_dcvs_ctrl = 0xbc, 403 .reg_freq_lut = 0x110, 404 .reg_volt_lut = 0x114, 405 .reg_current_vote = 0x704, 406 .reg_perf_state = 0x920, 407 .lut_row_size = 32, 408 }; 409 410 static const struct qcom_cpufreq_soc_data epss_soc_data = { 411 .reg_enable = 0x0, 412 .reg_domain_state = 0x20, 413 .reg_dcvs_ctrl = 0xb0, 414 .reg_freq_lut = 0x100, 415 .reg_volt_lut = 0x200, 416 .reg_intr_clr = 0x308, 417 .reg_perf_state = 0x320, 418 .lut_row_size = 4, 419 }; 420 421 static const struct of_device_id qcom_cpufreq_hw_match[] = { 422 { .compatible = "qcom,cpufreq-hw", .data = &qcom_soc_data }, 423 { .compatible = "qcom,cpufreq-epss", .data = &epss_soc_data }, 424 {} 425 }; 426 MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match); 427 428 static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index) 429 { 430 struct qcom_cpufreq_data *data = policy->driver_data; 431 struct platform_device *pdev = cpufreq_get_driver_data(); 432 int ret; 433 434 /* 435 * Look for LMh interrupt. If no interrupt line is specified / 436 * if there is an error, allow cpufreq to be enabled as usual. 437 */ 438 data->throttle_irq = platform_get_irq_optional(pdev, index); 439 if (data->throttle_irq == -ENXIO) 440 return 0; 441 if (data->throttle_irq < 0) 442 return data->throttle_irq; 443 444 ret = freq_qos_add_request(&policy->constraints, 445 &data->throttle_freq_req, FREQ_QOS_MAX, 446 FREQ_QOS_MAX_DEFAULT_VALUE); 447 if (ret < 0) { 448 dev_err(&pdev->dev, "Failed to add freq constraint (%d)\n", ret); 449 return ret; 450 } 451 452 data->cancel_throttle = false; 453 data->policy = policy; 454 455 mutex_init(&data->throttle_lock); 456 INIT_DEFERRABLE_WORK(&data->throttle_work, qcom_lmh_dcvs_poll); 457 458 snprintf(data->irq_name, sizeof(data->irq_name), "dcvsh-irq-%u", policy->cpu); 459 ret = request_threaded_irq(data->throttle_irq, NULL, qcom_lmh_dcvs_handle_irq, 460 IRQF_ONESHOT | IRQF_NO_AUTOEN, data->irq_name, data); 461 if (ret) { 462 dev_err(&pdev->dev, "Error registering %s: %d\n", data->irq_name, ret); 463 return 0; 464 } 465 466 ret = irq_set_affinity_and_hint(data->throttle_irq, policy->cpus); 467 if (ret) 468 dev_err(&pdev->dev, "Failed to set CPU affinity of %s[%d]\n", 469 data->irq_name, data->throttle_irq); 470 471 return 0; 472 } 473 474 static int qcom_cpufreq_hw_cpu_online(struct cpufreq_policy *policy) 475 { 476 struct qcom_cpufreq_data *data = policy->driver_data; 477 struct platform_device *pdev = cpufreq_get_driver_data(); 478 int ret; 479 480 if (data->throttle_irq <= 0) 481 return 0; 482 483 mutex_lock(&data->throttle_lock); 484 data->cancel_throttle = false; 485 mutex_unlock(&data->throttle_lock); 486 487 ret = irq_set_affinity_and_hint(data->throttle_irq, policy->cpus); 488 if (ret) 489 dev_err(&pdev->dev, "Failed to set CPU affinity of %s[%d]\n", 490 data->irq_name, data->throttle_irq); 491 492 return ret; 493 } 494 495 static int qcom_cpufreq_hw_cpu_offline(struct cpufreq_policy *policy) 496 { 497 struct qcom_cpufreq_data *data = policy->driver_data; 498 499 if (data->throttle_irq <= 0) 500 return 0; 501 502 mutex_lock(&data->throttle_lock); 503 data->cancel_throttle = true; 504 mutex_unlock(&data->throttle_lock); 505 506 cancel_delayed_work_sync(&data->throttle_work); 507 irq_set_affinity_and_hint(data->throttle_irq, NULL); 508 disable_irq_nosync(data->throttle_irq); 509 510 return 0; 511 } 512 513 static void qcom_cpufreq_hw_lmh_exit(struct qcom_cpufreq_data *data) 514 { 515 if (data->throttle_irq <= 0) 516 return; 517 518 freq_qos_remove_request(&data->throttle_freq_req); 519 free_irq(data->throttle_irq, data); 520 } 521 522 static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) 523 { 524 struct platform_device *pdev = cpufreq_get_driver_data(); 525 struct device *dev = &pdev->dev; 526 struct of_phandle_args args; 527 struct device_node *cpu_np; 528 struct device *cpu_dev; 529 struct qcom_cpufreq_data *data; 530 int ret, index; 531 532 cpu_dev = get_cpu_device(policy->cpu); 533 if (!cpu_dev) { 534 pr_err("%s: failed to get cpu%d device\n", __func__, 535 policy->cpu); 536 return -ENODEV; 537 } 538 539 cpu_np = of_cpu_device_node_get(policy->cpu); 540 if (!cpu_np) 541 return -EINVAL; 542 543 ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain", 544 "#freq-domain-cells", 0, &args); 545 of_node_put(cpu_np); 546 if (ret) 547 return ret; 548 549 index = args.args[0]; 550 data = &qcom_cpufreq.data[index]; 551 552 /* HW should be in enabled state to proceed */ 553 if (!(readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_enable) & 0x1)) { 554 dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index); 555 return -ENODEV; 556 } 557 558 if (readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_dcvs_ctrl) & 0x1) 559 data->per_core_dcvs = true; 560 561 qcom_get_related_cpus(index, policy->cpus); 562 563 policy->driver_data = data; 564 policy->dvfs_possible_from_any_cpu = true; 565 566 ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy); 567 if (ret) { 568 dev_err(dev, "Domain-%d failed to read LUT\n", index); 569 return ret; 570 } 571 572 ret = dev_pm_opp_get_opp_count(cpu_dev); 573 if (ret <= 0) { 574 dev_err(cpu_dev, "Failed to add OPPs\n"); 575 return -ENODEV; 576 } 577 578 if (policy_has_boost_freq(policy)) { 579 ret = cpufreq_enable_boost_support(); 580 if (ret) 581 dev_warn(cpu_dev, "failed to enable boost: %d\n", ret); 582 } 583 584 return qcom_cpufreq_hw_lmh_init(policy, index); 585 } 586 587 static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy) 588 { 589 struct device *cpu_dev = get_cpu_device(policy->cpu); 590 struct qcom_cpufreq_data *data = policy->driver_data; 591 struct resource *res = data->res; 592 void __iomem *base = data->base; 593 594 dev_pm_opp_remove_all_dynamic(cpu_dev); 595 dev_pm_opp_of_cpumask_remove_table(policy->related_cpus); 596 qcom_cpufreq_hw_lmh_exit(data); 597 kfree(policy->freq_table); 598 kfree(data); 599 iounmap(base); 600 release_mem_region(res->start, resource_size(res)); 601 602 return 0; 603 } 604 605 static void qcom_cpufreq_ready(struct cpufreq_policy *policy) 606 { 607 struct qcom_cpufreq_data *data = policy->driver_data; 608 609 if (data->throttle_irq >= 0) 610 enable_irq(data->throttle_irq); 611 } 612 613 static struct freq_attr *qcom_cpufreq_hw_attr[] = { 614 &cpufreq_freq_attr_scaling_available_freqs, 615 &cpufreq_freq_attr_scaling_boost_freqs, 616 NULL 617 }; 618 619 static struct cpufreq_driver cpufreq_qcom_hw_driver = { 620 .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | 621 CPUFREQ_HAVE_GOVERNOR_PER_POLICY | 622 CPUFREQ_IS_COOLING_DEV, 623 .verify = cpufreq_generic_frequency_table_verify, 624 .target_index = qcom_cpufreq_hw_target_index, 625 .get = qcom_cpufreq_hw_get, 626 .init = qcom_cpufreq_hw_cpu_init, 627 .exit = qcom_cpufreq_hw_cpu_exit, 628 .online = qcom_cpufreq_hw_cpu_online, 629 .offline = qcom_cpufreq_hw_cpu_offline, 630 .register_em = cpufreq_register_em_with_opp, 631 .fast_switch = qcom_cpufreq_hw_fast_switch, 632 .name = "qcom-cpufreq-hw", 633 .attr = qcom_cpufreq_hw_attr, 634 .ready = qcom_cpufreq_ready, 635 }; 636 637 static unsigned long qcom_cpufreq_hw_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) 638 { 639 struct qcom_cpufreq_data *data = container_of(hw, struct qcom_cpufreq_data, cpu_clk); 640 641 return qcom_lmh_get_throttle_freq(data); 642 } 643 644 static const struct clk_ops qcom_cpufreq_hw_clk_ops = { 645 .recalc_rate = qcom_cpufreq_hw_recalc_rate, 646 }; 647 648 static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev) 649 { 650 struct clk_hw_onecell_data *clk_data; 651 struct device *dev = &pdev->dev; 652 struct device_node *soc_node; 653 struct device *cpu_dev; 654 struct clk *clk; 655 int ret, i, num_domains, reg_sz; 656 657 clk = clk_get(dev, "xo"); 658 if (IS_ERR(clk)) 659 return PTR_ERR(clk); 660 661 xo_rate = clk_get_rate(clk); 662 clk_put(clk); 663 664 clk = clk_get(dev, "alternate"); 665 if (IS_ERR(clk)) 666 return PTR_ERR(clk); 667 668 cpu_hw_rate = clk_get_rate(clk) / CLK_HW_DIV; 669 clk_put(clk); 670 671 cpufreq_qcom_hw_driver.driver_data = pdev; 672 673 /* Check for optional interconnect paths on CPU0 */ 674 cpu_dev = get_cpu_device(0); 675 if (!cpu_dev) 676 return -EPROBE_DEFER; 677 678 ret = dev_pm_opp_of_find_icc_paths(cpu_dev, NULL); 679 if (ret) 680 return ret; 681 682 /* Allocate qcom_cpufreq_data based on the available frequency domains in DT */ 683 soc_node = of_get_parent(dev->of_node); 684 if (!soc_node) 685 return -EINVAL; 686 687 ret = of_property_read_u32(soc_node, "#address-cells", ®_sz); 688 if (ret) 689 goto of_exit; 690 691 ret = of_property_read_u32(soc_node, "#size-cells", &i); 692 if (ret) 693 goto of_exit; 694 695 reg_sz += i; 696 697 num_domains = of_property_count_elems_of_size(dev->of_node, "reg", sizeof(u32) * reg_sz); 698 if (num_domains <= 0) 699 return num_domains; 700 701 qcom_cpufreq.data = devm_kzalloc(dev, sizeof(struct qcom_cpufreq_data) * num_domains, 702 GFP_KERNEL); 703 if (!qcom_cpufreq.data) 704 return -ENOMEM; 705 706 qcom_cpufreq.soc_data = of_device_get_match_data(dev); 707 708 clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, num_domains), GFP_KERNEL); 709 if (!clk_data) 710 return -ENOMEM; 711 712 clk_data->num = num_domains; 713 714 for (i = 0; i < num_domains; i++) { 715 struct qcom_cpufreq_data *data = &qcom_cpufreq.data[i]; 716 struct clk_init_data clk_init = {}; 717 struct resource *res; 718 void __iomem *base; 719 720 base = devm_platform_get_and_ioremap_resource(pdev, i, &res); 721 if (IS_ERR(base)) { 722 dev_err(dev, "Failed to map resource %pR\n", res); 723 return PTR_ERR(base); 724 } 725 726 data->base = base; 727 data->res = res; 728 729 /* Register CPU clock for each frequency domain */ 730 clk_init.name = kasprintf(GFP_KERNEL, "qcom_cpufreq%d", i); 731 if (!clk_init.name) 732 return -ENOMEM; 733 734 clk_init.flags = CLK_GET_RATE_NOCACHE; 735 clk_init.ops = &qcom_cpufreq_hw_clk_ops; 736 data->cpu_clk.init = &clk_init; 737 738 ret = devm_clk_hw_register(dev, &data->cpu_clk); 739 if (ret < 0) { 740 dev_err(dev, "Failed to register clock %d: %d\n", i, ret); 741 kfree(clk_init.name); 742 return ret; 743 } 744 745 clk_data->hws[i] = &data->cpu_clk; 746 kfree(clk_init.name); 747 } 748 749 ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data); 750 if (ret < 0) { 751 dev_err(dev, "Failed to add clock provider\n"); 752 return ret; 753 } 754 755 ret = cpufreq_register_driver(&cpufreq_qcom_hw_driver); 756 if (ret) 757 dev_err(dev, "CPUFreq HW driver failed to register\n"); 758 else 759 dev_dbg(dev, "QCOM CPUFreq HW driver initialized\n"); 760 761 of_exit: 762 of_node_put(soc_node); 763 764 return ret; 765 } 766 767 static int qcom_cpufreq_hw_driver_remove(struct platform_device *pdev) 768 { 769 return cpufreq_unregister_driver(&cpufreq_qcom_hw_driver); 770 } 771 772 static struct platform_driver qcom_cpufreq_hw_driver = { 773 .probe = qcom_cpufreq_hw_driver_probe, 774 .remove = qcom_cpufreq_hw_driver_remove, 775 .driver = { 776 .name = "qcom-cpufreq-hw", 777 .of_match_table = qcom_cpufreq_hw_match, 778 }, 779 }; 780 781 static int __init qcom_cpufreq_hw_init(void) 782 { 783 return platform_driver_register(&qcom_cpufreq_hw_driver); 784 } 785 postcore_initcall(qcom_cpufreq_hw_init); 786 787 static void __exit qcom_cpufreq_hw_exit(void) 788 { 789 platform_driver_unregister(&qcom_cpufreq_hw_driver); 790 } 791 module_exit(qcom_cpufreq_hw_exit); 792 793 MODULE_DESCRIPTION("QCOM CPUFREQ HW Driver"); 794 MODULE_LICENSE("GPL v2"); 795