1 /* 2 * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> 3 * Copyright (C) 2004 John Steele Scott <toojays@toojays.net> 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License version 2 as 7 * published by the Free Software Foundation. 8 * 9 * TODO: Need a big cleanup here. Basically, we need to have different 10 * cpufreq_driver structures for the different type of HW instead of the 11 * current mess. We also need to better deal with the detection of the 12 * type of machine. 13 * 14 */ 15 16 #include <linux/module.h> 17 #include <linux/types.h> 18 #include <linux/errno.h> 19 #include <linux/kernel.h> 20 #include <linux/delay.h> 21 #include <linux/sched.h> 22 #include <linux/adb.h> 23 #include <linux/pmu.h> 24 #include <linux/cpufreq.h> 25 #include <linux/init.h> 26 #include <linux/device.h> 27 #include <linux/hardirq.h> 28 #include <linux/of_device.h> 29 #include <asm/prom.h> 30 #include <asm/machdep.h> 31 #include <asm/irq.h> 32 #include <asm/pmac_feature.h> 33 #include <asm/mmu_context.h> 34 #include <asm/sections.h> 35 #include <asm/cputable.h> 36 #include <asm/time.h> 37 #include <asm/mpic.h> 38 #include <asm/keylargo.h> 39 #include <asm/switch_to.h> 40 41 /* WARNING !!! This will cause calibrate_delay() to be called, 42 * but this is an __init function ! So you MUST go edit 43 * init/main.c to make it non-init before enabling DEBUG_FREQ 44 */ 45 #undef DEBUG_FREQ 46 47 extern void low_choose_7447a_dfs(int dfs); 48 extern void low_choose_750fx_pll(int pll); 49 extern void low_sleep_handler(void); 50 51 /* 52 * Currently, PowerMac cpufreq supports only high & low frequencies 53 * that are set by the firmware 54 */ 55 static unsigned int low_freq; 56 static unsigned int hi_freq; 57 static unsigned int cur_freq; 58 static unsigned int sleep_freq; 59 static unsigned long transition_latency; 60 61 /* 62 * Different models uses different mechanisms to switch the frequency 63 */ 64 static int (*set_speed_proc)(int low_speed); 65 static unsigned int (*get_speed_proc)(void); 66 67 /* 68 * Some definitions used by the various speedprocs 69 */ 70 static u32 voltage_gpio; 71 static u32 frequency_gpio; 72 static u32 slew_done_gpio; 73 static int no_schedule; 74 static int has_cpu_l2lve; 75 static int is_pmu_based; 76 77 /* There are only two frequency states for each processor. Values 78 * are in kHz for the time being. 79 */ 80 #define CPUFREQ_HIGH 0 81 #define CPUFREQ_LOW 1 82 83 static struct cpufreq_frequency_table pmac_cpu_freqs[] = { 84 {0, CPUFREQ_HIGH, 0}, 85 {0, CPUFREQ_LOW, 0}, 86 {0, 0, CPUFREQ_TABLE_END}, 87 }; 88 89 static inline void local_delay(unsigned long ms) 90 { 91 if (no_schedule) 92 mdelay(ms); 93 else 94 msleep(ms); 95 } 96 97 #ifdef DEBUG_FREQ 98 static inline void debug_calc_bogomips(void) 99 { 100 /* This will cause a recalc of bogomips and display the 101 * result. We backup/restore the value to avoid affecting the 102 * core cpufreq framework's own calculation. 103 */ 104 unsigned long save_lpj = loops_per_jiffy; 105 calibrate_delay(); 106 loops_per_jiffy = save_lpj; 107 } 108 #endif /* DEBUG_FREQ */ 109 110 /* Switch CPU speed under 750FX CPU control 111 */ 112 static int cpu_750fx_cpu_speed(int low_speed) 113 { 114 u32 hid2; 115 116 if (low_speed == 0) { 117 /* ramping up, set voltage first */ 118 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); 119 /* Make sure we sleep for at least 1ms */ 120 local_delay(10); 121 122 /* tweak L2 for high voltage */ 123 if (has_cpu_l2lve) { 124 hid2 = mfspr(SPRN_HID2); 125 hid2 &= ~0x2000; 126 mtspr(SPRN_HID2, hid2); 127 } 128 } 129 #ifdef CONFIG_6xx 130 low_choose_750fx_pll(low_speed); 131 #endif 132 if (low_speed == 1) { 133 /* tweak L2 for low voltage */ 134 if (has_cpu_l2lve) { 135 hid2 = mfspr(SPRN_HID2); 136 hid2 |= 0x2000; 137 mtspr(SPRN_HID2, hid2); 138 } 139 140 /* ramping down, set voltage last */ 141 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); 142 local_delay(10); 143 } 144 145 return 0; 146 } 147 148 static unsigned int cpu_750fx_get_cpu_speed(void) 149 { 150 if (mfspr(SPRN_HID1) & HID1_PS) 151 return low_freq; 152 else 153 return hi_freq; 154 } 155 156 /* Switch CPU speed using DFS */ 157 static int dfs_set_cpu_speed(int low_speed) 158 { 159 if (low_speed == 0) { 160 /* ramping up, set voltage first */ 161 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); 162 /* Make sure we sleep for at least 1ms */ 163 local_delay(1); 164 } 165 166 /* set frequency */ 167 #ifdef CONFIG_6xx 168 low_choose_7447a_dfs(low_speed); 169 #endif 170 udelay(100); 171 172 if (low_speed == 1) { 173 /* ramping down, set voltage last */ 174 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); 175 local_delay(1); 176 } 177 178 return 0; 179 } 180 181 static unsigned int dfs_get_cpu_speed(void) 182 { 183 if (mfspr(SPRN_HID1) & HID1_DFS) 184 return low_freq; 185 else 186 return hi_freq; 187 } 188 189 190 /* Switch CPU speed using slewing GPIOs 191 */ 192 static int gpios_set_cpu_speed(int low_speed) 193 { 194 int gpio, timeout = 0; 195 196 /* If ramping up, set voltage first */ 197 if (low_speed == 0) { 198 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); 199 /* Delay is way too big but it's ok, we schedule */ 200 local_delay(10); 201 } 202 203 /* Set frequency */ 204 gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); 205 if (low_speed == ((gpio & 0x01) == 0)) 206 goto skip; 207 208 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, 209 low_speed ? 0x04 : 0x05); 210 udelay(200); 211 do { 212 if (++timeout > 100) 213 break; 214 local_delay(1); 215 gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); 216 } while((gpio & 0x02) == 0); 217 skip: 218 /* If ramping down, set voltage last */ 219 if (low_speed == 1) { 220 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); 221 /* Delay is way too big but it's ok, we schedule */ 222 local_delay(10); 223 } 224 225 #ifdef DEBUG_FREQ 226 debug_calc_bogomips(); 227 #endif 228 229 return 0; 230 } 231 232 /* Switch CPU speed under PMU control 233 */ 234 static int pmu_set_cpu_speed(int low_speed) 235 { 236 struct adb_request req; 237 unsigned long save_l2cr; 238 unsigned long save_l3cr; 239 unsigned int pic_prio; 240 unsigned long flags; 241 242 preempt_disable(); 243 244 #ifdef DEBUG_FREQ 245 printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); 246 #endif 247 pmu_suspend(); 248 249 /* Disable all interrupt sources on openpic */ 250 pic_prio = mpic_cpu_get_priority(); 251 mpic_cpu_set_priority(0xf); 252 253 /* Make sure the decrementer won't interrupt us */ 254 asm volatile("mtdec %0" : : "r" (0x7fffffff)); 255 /* Make sure any pending DEC interrupt occurring while we did 256 * the above didn't re-enable the DEC */ 257 mb(); 258 asm volatile("mtdec %0" : : "r" (0x7fffffff)); 259 260 /* We can now disable MSR_EE */ 261 local_irq_save(flags); 262 263 /* Giveup the FPU & vec */ 264 enable_kernel_fp(); 265 266 #ifdef CONFIG_ALTIVEC 267 if (cpu_has_feature(CPU_FTR_ALTIVEC)) 268 enable_kernel_altivec(); 269 #endif /* CONFIG_ALTIVEC */ 270 271 /* Save & disable L2 and L3 caches */ 272 save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ 273 save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ 274 275 /* Send the new speed command. My assumption is that this command 276 * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep 277 */ 278 pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); 279 while (!req.complete) 280 pmu_poll(); 281 282 /* Prepare the northbridge for the speed transition */ 283 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); 284 285 /* Call low level code to backup CPU state and recover from 286 * hardware reset 287 */ 288 low_sleep_handler(); 289 290 /* Restore the northbridge */ 291 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); 292 293 /* Restore L2 cache */ 294 if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) 295 _set_L2CR(save_l2cr); 296 /* Restore L3 cache */ 297 if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) 298 _set_L3CR(save_l3cr); 299 300 /* Restore userland MMU context */ 301 switch_mmu_context(NULL, current->active_mm); 302 303 #ifdef DEBUG_FREQ 304 printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); 305 #endif 306 307 /* Restore low level PMU operations */ 308 pmu_unlock(); 309 310 /* 311 * Restore decrementer; we'll take a decrementer interrupt 312 * as soon as interrupts are re-enabled and the generic 313 * clockevents code will reprogram it with the right value. 314 */ 315 set_dec(1); 316 317 /* Restore interrupts */ 318 mpic_cpu_set_priority(pic_prio); 319 320 /* Let interrupts flow again ... */ 321 local_irq_restore(flags); 322 323 #ifdef DEBUG_FREQ 324 debug_calc_bogomips(); 325 #endif 326 327 pmu_resume(); 328 329 preempt_enable(); 330 331 return 0; 332 } 333 334 static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode) 335 { 336 unsigned long l3cr; 337 static unsigned long prev_l3cr; 338 339 if (speed_mode == CPUFREQ_LOW && 340 cpu_has_feature(CPU_FTR_L3CR)) { 341 l3cr = _get_L3CR(); 342 if (l3cr & L3CR_L3E) { 343 prev_l3cr = l3cr; 344 _set_L3CR(0); 345 } 346 } 347 set_speed_proc(speed_mode == CPUFREQ_LOW); 348 if (speed_mode == CPUFREQ_HIGH && 349 cpu_has_feature(CPU_FTR_L3CR)) { 350 l3cr = _get_L3CR(); 351 if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) 352 _set_L3CR(prev_l3cr); 353 } 354 cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; 355 356 return 0; 357 } 358 359 static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) 360 { 361 return cur_freq; 362 } 363 364 static int pmac_cpufreq_target( struct cpufreq_policy *policy, 365 unsigned int index) 366 { 367 int rc; 368 369 rc = do_set_cpu_speed(policy, index); 370 371 ppc_proc_freq = cur_freq * 1000ul; 372 return rc; 373 } 374 375 static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) 376 { 377 return cpufreq_generic_init(policy, pmac_cpu_freqs, transition_latency); 378 } 379 380 static u32 read_gpio(struct device_node *np) 381 { 382 const u32 *reg = of_get_property(np, "reg", NULL); 383 u32 offset; 384 385 if (reg == NULL) 386 return 0; 387 /* That works for all keylargos but shall be fixed properly 388 * some day... The problem is that it seems we can't rely 389 * on the "reg" property of the GPIO nodes, they are either 390 * relative to the base of KeyLargo or to the base of the 391 * GPIO space, and the device-tree doesn't help. 392 */ 393 offset = *reg; 394 if (offset < KEYLARGO_GPIO_LEVELS0) 395 offset += KEYLARGO_GPIO_LEVELS0; 396 return offset; 397 } 398 399 static int pmac_cpufreq_suspend(struct cpufreq_policy *policy) 400 { 401 /* Ok, this could be made a bit smarter, but let's be robust for now. We 402 * always force a speed change to high speed before sleep, to make sure 403 * we have appropriate voltage and/or bus speed for the wakeup process, 404 * and to make sure our loops_per_jiffies are "good enough", that is will 405 * not cause too short delays if we sleep in low speed and wake in high 406 * speed.. 407 */ 408 no_schedule = 1; 409 sleep_freq = cur_freq; 410 if (cur_freq == low_freq && !is_pmu_based) 411 do_set_cpu_speed(policy, CPUFREQ_HIGH); 412 return 0; 413 } 414 415 static int pmac_cpufreq_resume(struct cpufreq_policy *policy) 416 { 417 /* If we resume, first check if we have a get() function */ 418 if (get_speed_proc) 419 cur_freq = get_speed_proc(); 420 else 421 cur_freq = 0; 422 423 /* We don't, hrm... we don't really know our speed here, best 424 * is that we force a switch to whatever it was, which is 425 * probably high speed due to our suspend() routine 426 */ 427 do_set_cpu_speed(policy, sleep_freq == low_freq ? 428 CPUFREQ_LOW : CPUFREQ_HIGH); 429 430 ppc_proc_freq = cur_freq * 1000ul; 431 432 no_schedule = 0; 433 return 0; 434 } 435 436 static struct cpufreq_driver pmac_cpufreq_driver = { 437 .verify = cpufreq_generic_frequency_table_verify, 438 .target_index = pmac_cpufreq_target, 439 .get = pmac_cpufreq_get_speed, 440 .init = pmac_cpufreq_cpu_init, 441 .suspend = pmac_cpufreq_suspend, 442 .resume = pmac_cpufreq_resume, 443 .flags = CPUFREQ_PM_NO_WARN, 444 .attr = cpufreq_generic_attr, 445 .name = "powermac", 446 }; 447 448 449 static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) 450 { 451 struct device_node *volt_gpio_np = of_find_node_by_name(NULL, 452 "voltage-gpio"); 453 struct device_node *freq_gpio_np = of_find_node_by_name(NULL, 454 "frequency-gpio"); 455 struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, 456 "slewing-done"); 457 const u32 *value; 458 459 /* 460 * Check to see if it's GPIO driven or PMU only 461 * 462 * The way we extract the GPIO address is slightly hackish, but it 463 * works well enough for now. We need to abstract the whole GPIO 464 * stuff sooner or later anyway 465 */ 466 467 if (volt_gpio_np) 468 voltage_gpio = read_gpio(volt_gpio_np); 469 if (freq_gpio_np) 470 frequency_gpio = read_gpio(freq_gpio_np); 471 if (slew_done_gpio_np) 472 slew_done_gpio = read_gpio(slew_done_gpio_np); 473 474 /* If we use the frequency GPIOs, calculate the min/max speeds based 475 * on the bus frequencies 476 */ 477 if (frequency_gpio && slew_done_gpio) { 478 int lenp, rc; 479 const u32 *freqs, *ratio; 480 481 freqs = of_get_property(cpunode, "bus-frequencies", &lenp); 482 lenp /= sizeof(u32); 483 if (freqs == NULL || lenp != 2) { 484 printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); 485 return 1; 486 } 487 ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", 488 NULL); 489 if (ratio == NULL) { 490 printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); 491 return 1; 492 } 493 494 /* Get the min/max bus frequencies */ 495 low_freq = min(freqs[0], freqs[1]); 496 hi_freq = max(freqs[0], freqs[1]); 497 498 /* Grrrr.. It _seems_ that the device-tree is lying on the low bus 499 * frequency, it claims it to be around 84Mhz on some models while 500 * it appears to be approx. 101Mhz on all. Let's hack around here... 501 * fortunately, we don't need to be too precise 502 */ 503 if (low_freq < 98000000) 504 low_freq = 101000000; 505 506 /* Convert those to CPU core clocks */ 507 low_freq = (low_freq * (*ratio)) / 2000; 508 hi_freq = (hi_freq * (*ratio)) / 2000; 509 510 /* Now we get the frequencies, we read the GPIO to see what is out current 511 * speed 512 */ 513 rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); 514 cur_freq = (rc & 0x01) ? hi_freq : low_freq; 515 516 set_speed_proc = gpios_set_cpu_speed; 517 return 1; 518 } 519 520 /* If we use the PMU, look for the min & max frequencies in the 521 * device-tree 522 */ 523 value = of_get_property(cpunode, "min-clock-frequency", NULL); 524 if (!value) 525 return 1; 526 low_freq = (*value) / 1000; 527 /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree 528 * here */ 529 if (low_freq < 100000) 530 low_freq *= 10; 531 532 value = of_get_property(cpunode, "max-clock-frequency", NULL); 533 if (!value) 534 return 1; 535 hi_freq = (*value) / 1000; 536 set_speed_proc = pmu_set_cpu_speed; 537 is_pmu_based = 1; 538 539 return 0; 540 } 541 542 static int pmac_cpufreq_init_7447A(struct device_node *cpunode) 543 { 544 struct device_node *volt_gpio_np; 545 546 if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) 547 return 1; 548 549 volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); 550 if (volt_gpio_np) 551 voltage_gpio = read_gpio(volt_gpio_np); 552 if (!voltage_gpio){ 553 printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); 554 return 1; 555 } 556 557 /* OF only reports the high frequency */ 558 hi_freq = cur_freq; 559 low_freq = cur_freq/2; 560 561 /* Read actual frequency from CPU */ 562 cur_freq = dfs_get_cpu_speed(); 563 set_speed_proc = dfs_set_cpu_speed; 564 get_speed_proc = dfs_get_cpu_speed; 565 566 return 0; 567 } 568 569 static int pmac_cpufreq_init_750FX(struct device_node *cpunode) 570 { 571 struct device_node *volt_gpio_np; 572 u32 pvr; 573 const u32 *value; 574 575 if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) 576 return 1; 577 578 hi_freq = cur_freq; 579 value = of_get_property(cpunode, "reduced-clock-frequency", NULL); 580 if (!value) 581 return 1; 582 low_freq = (*value) / 1000; 583 584 volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); 585 if (volt_gpio_np) 586 voltage_gpio = read_gpio(volt_gpio_np); 587 588 pvr = mfspr(SPRN_PVR); 589 has_cpu_l2lve = !((pvr & 0xf00) == 0x100); 590 591 set_speed_proc = cpu_750fx_cpu_speed; 592 get_speed_proc = cpu_750fx_get_cpu_speed; 593 cur_freq = cpu_750fx_get_cpu_speed(); 594 595 return 0; 596 } 597 598 /* Currently, we support the following machines: 599 * 600 * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) 601 * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) 602 * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) 603 * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) 604 * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) 605 * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) 606 * - Recent MacRISC3 laptops 607 * - All new machines with 7447A CPUs 608 */ 609 static int __init pmac_cpufreq_setup(void) 610 { 611 struct device_node *cpunode; 612 const u32 *value; 613 614 if (strstr(boot_command_line, "nocpufreq")) 615 return 0; 616 617 /* Get first CPU node */ 618 cpunode = of_cpu_device_node_get(0); 619 if (!cpunode) 620 goto out; 621 622 /* Get current cpu clock freq */ 623 value = of_get_property(cpunode, "clock-frequency", NULL); 624 if (!value) 625 goto out; 626 cur_freq = (*value) / 1000; 627 transition_latency = CPUFREQ_ETERNAL; 628 629 /* Check for 7447A based MacRISC3 */ 630 if (of_machine_is_compatible("MacRISC3") && 631 of_get_property(cpunode, "dynamic-power-step", NULL) && 632 PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { 633 pmac_cpufreq_init_7447A(cpunode); 634 transition_latency = 8000000; 635 /* Check for other MacRISC3 machines */ 636 } else if (of_machine_is_compatible("PowerBook3,4") || 637 of_machine_is_compatible("PowerBook3,5") || 638 of_machine_is_compatible("MacRISC3")) { 639 pmac_cpufreq_init_MacRISC3(cpunode); 640 /* Else check for iBook2 500/600 */ 641 } else if (of_machine_is_compatible("PowerBook4,1")) { 642 hi_freq = cur_freq; 643 low_freq = 400000; 644 set_speed_proc = pmu_set_cpu_speed; 645 is_pmu_based = 1; 646 } 647 /* Else check for TiPb 550 */ 648 else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { 649 hi_freq = cur_freq; 650 low_freq = 500000; 651 set_speed_proc = pmu_set_cpu_speed; 652 is_pmu_based = 1; 653 } 654 /* Else check for TiPb 400 & 500 */ 655 else if (of_machine_is_compatible("PowerBook3,2")) { 656 /* We only know about the 400 MHz and the 500Mhz model 657 * they both have 300 MHz as low frequency 658 */ 659 if (cur_freq < 350000 || cur_freq > 550000) 660 goto out; 661 hi_freq = cur_freq; 662 low_freq = 300000; 663 set_speed_proc = pmu_set_cpu_speed; 664 is_pmu_based = 1; 665 } 666 /* Else check for 750FX */ 667 else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) 668 pmac_cpufreq_init_750FX(cpunode); 669 out: 670 of_node_put(cpunode); 671 if (set_speed_proc == NULL) 672 return -ENODEV; 673 674 pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; 675 pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; 676 ppc_proc_freq = cur_freq * 1000ul; 677 678 printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); 679 printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", 680 low_freq/1000, hi_freq/1000, cur_freq/1000); 681 682 return cpufreq_register_driver(&pmac_cpufreq_driver); 683 } 684 685 module_init(pmac_cpufreq_setup); 686 687