1 /* 2 * Pentium 4/Xeon CPU on demand clock modulation/speed scaling 3 * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> 4 * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> 5 * (C) 2002 Arjan van de Ven <arjanv@redhat.com> 6 * (C) 2002 Tora T. Engstad 7 * All Rights Reserved 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * as published by the Free Software Foundation; either version 12 * 2 of the License, or (at your option) any later version. 13 * 14 * The author(s) of this software shall not be held liable for damages 15 * of any nature resulting due to the use of this software. This 16 * software is provided AS-IS with no warranties. 17 * 18 * Date Errata Description 19 * 20020525 N44, O17 12.5% or 25% DC causes lockup 20 * 21 */ 22 23 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 24 25 #include <linux/kernel.h> 26 #include <linux/module.h> 27 #include <linux/init.h> 28 #include <linux/smp.h> 29 #include <linux/cpufreq.h> 30 #include <linux/cpumask.h> 31 #include <linux/timex.h> 32 33 #include <asm/processor.h> 34 #include <asm/msr.h> 35 #include <asm/timer.h> 36 #include <asm/cpu_device_id.h> 37 38 #include "speedstep-lib.h" 39 40 /* 41 * Duty Cycle (3bits), note DC_DISABLE is not specified in 42 * intel docs i just use it to mean disable 43 */ 44 enum { 45 DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT, 46 DC_64PT, DC_75PT, DC_88PT, DC_DISABLE 47 }; 48 49 #define DC_ENTRIES 8 50 51 52 static int has_N44_O17_errata[NR_CPUS]; 53 static unsigned int stock_freq; 54 static struct cpufreq_driver p4clockmod_driver; 55 static unsigned int cpufreq_p4_get(unsigned int cpu); 56 57 static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) 58 { 59 u32 l, h; 60 61 if ((newstate > DC_DISABLE) || (newstate == DC_RESV)) 62 return -EINVAL; 63 64 rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h); 65 66 if (l & 0x01) 67 pr_debug("CPU#%d currently thermal throttled\n", cpu); 68 69 if (has_N44_O17_errata[cpu] && 70 (newstate == DC_25PT || newstate == DC_DFLT)) 71 newstate = DC_38PT; 72 73 rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); 74 if (newstate == DC_DISABLE) { 75 pr_debug("CPU#%d disabling modulation\n", cpu); 76 wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h); 77 } else { 78 pr_debug("CPU#%d setting duty cycle to %d%%\n", 79 cpu, ((125 * newstate) / 10)); 80 /* bits 63 - 5 : reserved 81 * bit 4 : enable/disable 82 * bits 3-1 : duty cycle 83 * bit 0 : reserved 84 */ 85 l = (l & ~14); 86 l = l | (1<<4) | ((newstate & 0x7)<<1); 87 wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h); 88 } 89 90 return 0; 91 } 92 93 94 static struct cpufreq_frequency_table p4clockmod_table[] = { 95 {0, DC_RESV, CPUFREQ_ENTRY_INVALID}, 96 {0, DC_DFLT, 0}, 97 {0, DC_25PT, 0}, 98 {0, DC_38PT, 0}, 99 {0, DC_50PT, 0}, 100 {0, DC_64PT, 0}, 101 {0, DC_75PT, 0}, 102 {0, DC_88PT, 0}, 103 {0, DC_DISABLE, 0}, 104 {0, DC_RESV, CPUFREQ_TABLE_END}, 105 }; 106 107 108 static int cpufreq_p4_target(struct cpufreq_policy *policy, unsigned int index) 109 { 110 int i; 111 112 /* run on each logical CPU, 113 * see section 13.15.3 of IA32 Intel Architecture Software 114 * Developer's Manual, Volume 3 115 */ 116 for_each_cpu(i, policy->cpus) 117 cpufreq_p4_setdc(i, p4clockmod_table[index].driver_data); 118 119 return 0; 120 } 121 122 123 static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) 124 { 125 if (c->x86 == 0x06) { 126 if (cpu_has(c, X86_FEATURE_EST)) 127 pr_warn_once("Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.\n"); 128 switch (c->x86_model) { 129 case 0x0E: /* Core */ 130 case 0x0F: /* Core Duo */ 131 case 0x16: /* Celeron Core */ 132 case 0x1C: /* Atom */ 133 p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; 134 return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE); 135 case 0x0D: /* Pentium M (Dothan) */ 136 p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; 137 /* fall through */ 138 case 0x09: /* Pentium M (Banias) */ 139 return speedstep_get_frequency(SPEEDSTEP_CPU_PM); 140 } 141 } 142 143 if (c->x86 != 0xF) 144 return 0; 145 146 /* on P-4s, the TSC runs with constant frequency independent whether 147 * throttling is active or not. */ 148 p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; 149 150 if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) { 151 pr_warn("Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.\n"); 152 return speedstep_get_frequency(SPEEDSTEP_CPU_P4M); 153 } 154 155 return speedstep_get_frequency(SPEEDSTEP_CPU_P4D); 156 } 157 158 159 160 static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) 161 { 162 struct cpuinfo_x86 *c = &cpu_data(policy->cpu); 163 int cpuid = 0; 164 unsigned int i; 165 166 #ifdef CONFIG_SMP 167 cpumask_copy(policy->cpus, topology_sibling_cpumask(policy->cpu)); 168 #endif 169 170 /* Errata workaround */ 171 cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_stepping; 172 switch (cpuid) { 173 case 0x0f07: 174 case 0x0f0a: 175 case 0x0f11: 176 case 0x0f12: 177 has_N44_O17_errata[policy->cpu] = 1; 178 pr_debug("has errata -- disabling low frequencies\n"); 179 } 180 181 if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D && 182 c->x86_model < 2) { 183 /* switch to maximum frequency and measure result */ 184 cpufreq_p4_setdc(policy->cpu, DC_DISABLE); 185 recalibrate_cpu_khz(); 186 } 187 /* get max frequency */ 188 stock_freq = cpufreq_p4_get_frequency(c); 189 if (!stock_freq) 190 return -EINVAL; 191 192 /* table init */ 193 for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { 194 if ((i < 2) && (has_N44_O17_errata[policy->cpu])) 195 p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; 196 else 197 p4clockmod_table[i].frequency = (stock_freq * i)/8; 198 } 199 200 /* cpuinfo and default policy values */ 201 202 /* the transition latency is set to be 1 higher than the maximum 203 * transition latency of the ondemand governor */ 204 policy->cpuinfo.transition_latency = 10000001; 205 policy->freq_table = &p4clockmod_table[0]; 206 207 return 0; 208 } 209 210 211 static unsigned int cpufreq_p4_get(unsigned int cpu) 212 { 213 u32 l, h; 214 215 rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); 216 217 if (l & 0x10) { 218 l = l >> 1; 219 l &= 0x7; 220 } else 221 l = DC_DISABLE; 222 223 if (l != DC_DISABLE) 224 return stock_freq * l / 8; 225 226 return stock_freq; 227 } 228 229 static struct cpufreq_driver p4clockmod_driver = { 230 .verify = cpufreq_generic_frequency_table_verify, 231 .target_index = cpufreq_p4_target, 232 .init = cpufreq_p4_cpu_init, 233 .get = cpufreq_p4_get, 234 .name = "p4-clockmod", 235 .attr = cpufreq_generic_attr, 236 }; 237 238 static const struct x86_cpu_id cpufreq_p4_id[] = { 239 { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_ACC }, 240 {} 241 }; 242 243 /* 244 * Intentionally no MODULE_DEVICE_TABLE here: this driver should not 245 * be auto loaded. Please don't add one. 246 */ 247 248 static int __init cpufreq_p4_init(void) 249 { 250 int ret; 251 252 /* 253 * THERM_CONTROL is architectural for IA32 now, so 254 * we can rely on the capability checks 255 */ 256 if (!x86_match_cpu(cpufreq_p4_id) || !boot_cpu_has(X86_FEATURE_ACPI)) 257 return -ENODEV; 258 259 ret = cpufreq_register_driver(&p4clockmod_driver); 260 if (!ret) 261 pr_info("P4/Xeon(TM) CPU On-Demand Clock Modulation available\n"); 262 263 return ret; 264 } 265 266 267 static void __exit cpufreq_p4_exit(void) 268 { 269 cpufreq_unregister_driver(&p4clockmod_driver); 270 } 271 272 273 MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>"); 274 MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); 275 MODULE_LICENSE("GPL"); 276 277 late_initcall(cpufreq_p4_init); 278 module_exit(cpufreq_p4_exit); 279