1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Pentium 4/Xeon CPU on demand clock modulation/speed scaling 4 * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> 5 * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> 6 * (C) 2002 Arjan van de Ven <arjanv@redhat.com> 7 * (C) 2002 Tora T. Engstad 8 * All Rights Reserved 9 * 10 * The author(s) of this software shall not be held liable for damages 11 * of any nature resulting due to the use of this software. This 12 * software is provided AS-IS with no warranties. 13 * 14 * Date Errata Description 15 * 20020525 N44, O17 12.5% or 25% DC causes lockup 16 */ 17 18 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 19 20 #include <linux/kernel.h> 21 #include <linux/module.h> 22 #include <linux/init.h> 23 #include <linux/smp.h> 24 #include <linux/cpufreq.h> 25 #include <linux/cpumask.h> 26 #include <linux/timex.h> 27 28 #include <asm/processor.h> 29 #include <asm/msr.h> 30 #include <asm/timer.h> 31 #include <asm/cpu_device_id.h> 32 33 #include "speedstep-lib.h" 34 35 /* 36 * Duty Cycle (3bits), note DC_DISABLE is not specified in 37 * intel docs i just use it to mean disable 38 */ 39 enum { 40 DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT, 41 DC_64PT, DC_75PT, DC_88PT, DC_DISABLE 42 }; 43 44 #define DC_ENTRIES 8 45 46 47 static int has_N44_O17_errata[NR_CPUS]; 48 static unsigned int stock_freq; 49 static struct cpufreq_driver p4clockmod_driver; 50 static unsigned int cpufreq_p4_get(unsigned int cpu); 51 52 static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) 53 { 54 u32 l, h; 55 56 if ((newstate > DC_DISABLE) || (newstate == DC_RESV)) 57 return -EINVAL; 58 59 rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h); 60 61 if (l & 0x01) 62 pr_debug("CPU#%d currently thermal throttled\n", cpu); 63 64 if (has_N44_O17_errata[cpu] && 65 (newstate == DC_25PT || newstate == DC_DFLT)) 66 newstate = DC_38PT; 67 68 rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); 69 if (newstate == DC_DISABLE) { 70 pr_debug("CPU#%d disabling modulation\n", cpu); 71 wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h); 72 } else { 73 pr_debug("CPU#%d setting duty cycle to %d%%\n", 74 cpu, ((125 * newstate) / 10)); 75 /* bits 63 - 5 : reserved 76 * bit 4 : enable/disable 77 * bits 3-1 : duty cycle 78 * bit 0 : reserved 79 */ 80 l = (l & ~14); 81 l = l | (1<<4) | ((newstate & 0x7)<<1); 82 wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h); 83 } 84 85 return 0; 86 } 87 88 89 static struct cpufreq_frequency_table p4clockmod_table[] = { 90 {0, DC_RESV, CPUFREQ_ENTRY_INVALID}, 91 {0, DC_DFLT, 0}, 92 {0, DC_25PT, 0}, 93 {0, DC_38PT, 0}, 94 {0, DC_50PT, 0}, 95 {0, DC_64PT, 0}, 96 {0, DC_75PT, 0}, 97 {0, DC_88PT, 0}, 98 {0, DC_DISABLE, 0}, 99 {0, DC_RESV, CPUFREQ_TABLE_END}, 100 }; 101 102 103 static int cpufreq_p4_target(struct cpufreq_policy *policy, unsigned int index) 104 { 105 int i; 106 107 /* run on each logical CPU, 108 * see section 13.15.3 of IA32 Intel Architecture Software 109 * Developer's Manual, Volume 3 110 */ 111 for_each_cpu(i, policy->cpus) 112 cpufreq_p4_setdc(i, p4clockmod_table[index].driver_data); 113 114 return 0; 115 } 116 117 118 static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) 119 { 120 if (c->x86 == 0x06) { 121 if (cpu_has(c, X86_FEATURE_EST)) 122 pr_warn_once("Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.\n"); 123 switch (c->x86_model) { 124 case 0x0E: /* Core */ 125 case 0x0F: /* Core Duo */ 126 case 0x16: /* Celeron Core */ 127 case 0x1C: /* Atom */ 128 p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; 129 return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE); 130 case 0x0D: /* Pentium M (Dothan) */ 131 p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; 132 /* fall through */ 133 case 0x09: /* Pentium M (Banias) */ 134 return speedstep_get_frequency(SPEEDSTEP_CPU_PM); 135 } 136 } 137 138 if (c->x86 != 0xF) 139 return 0; 140 141 /* on P-4s, the TSC runs with constant frequency independent whether 142 * throttling is active or not. */ 143 p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; 144 145 if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) { 146 pr_warn("Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.\n"); 147 return speedstep_get_frequency(SPEEDSTEP_CPU_P4M); 148 } 149 150 return speedstep_get_frequency(SPEEDSTEP_CPU_P4D); 151 } 152 153 154 155 static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) 156 { 157 struct cpuinfo_x86 *c = &cpu_data(policy->cpu); 158 int cpuid = 0; 159 unsigned int i; 160 161 #ifdef CONFIG_SMP 162 cpumask_copy(policy->cpus, topology_sibling_cpumask(policy->cpu)); 163 #endif 164 165 /* Errata workaround */ 166 cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_stepping; 167 switch (cpuid) { 168 case 0x0f07: 169 case 0x0f0a: 170 case 0x0f11: 171 case 0x0f12: 172 has_N44_O17_errata[policy->cpu] = 1; 173 pr_debug("has errata -- disabling low frequencies\n"); 174 } 175 176 if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D && 177 c->x86_model < 2) { 178 /* switch to maximum frequency and measure result */ 179 cpufreq_p4_setdc(policy->cpu, DC_DISABLE); 180 recalibrate_cpu_khz(); 181 } 182 /* get max frequency */ 183 stock_freq = cpufreq_p4_get_frequency(c); 184 if (!stock_freq) 185 return -EINVAL; 186 187 /* table init */ 188 for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { 189 if ((i < 2) && (has_N44_O17_errata[policy->cpu])) 190 p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; 191 else 192 p4clockmod_table[i].frequency = (stock_freq * i)/8; 193 } 194 195 /* cpuinfo and default policy values */ 196 197 /* the transition latency is set to be 1 higher than the maximum 198 * transition latency of the ondemand governor */ 199 policy->cpuinfo.transition_latency = 10000001; 200 policy->freq_table = &p4clockmod_table[0]; 201 202 return 0; 203 } 204 205 206 static unsigned int cpufreq_p4_get(unsigned int cpu) 207 { 208 u32 l, h; 209 210 rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); 211 212 if (l & 0x10) { 213 l = l >> 1; 214 l &= 0x7; 215 } else 216 l = DC_DISABLE; 217 218 if (l != DC_DISABLE) 219 return stock_freq * l / 8; 220 221 return stock_freq; 222 } 223 224 static struct cpufreq_driver p4clockmod_driver = { 225 .verify = cpufreq_generic_frequency_table_verify, 226 .target_index = cpufreq_p4_target, 227 .init = cpufreq_p4_cpu_init, 228 .get = cpufreq_p4_get, 229 .name = "p4-clockmod", 230 .attr = cpufreq_generic_attr, 231 }; 232 233 static const struct x86_cpu_id cpufreq_p4_id[] = { 234 { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_ACC }, 235 {} 236 }; 237 238 /* 239 * Intentionally no MODULE_DEVICE_TABLE here: this driver should not 240 * be auto loaded. Please don't add one. 241 */ 242 243 static int __init cpufreq_p4_init(void) 244 { 245 int ret; 246 247 /* 248 * THERM_CONTROL is architectural for IA32 now, so 249 * we can rely on the capability checks 250 */ 251 if (!x86_match_cpu(cpufreq_p4_id) || !boot_cpu_has(X86_FEATURE_ACPI)) 252 return -ENODEV; 253 254 ret = cpufreq_register_driver(&p4clockmod_driver); 255 if (!ret) 256 pr_info("P4/Xeon(TM) CPU On-Demand Clock Modulation available\n"); 257 258 return ret; 259 } 260 261 262 static void __exit cpufreq_p4_exit(void) 263 { 264 cpufreq_unregister_driver(&p4clockmod_driver); 265 } 266 267 268 MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>"); 269 MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); 270 MODULE_LICENSE("GPL"); 271 272 late_initcall(cpufreq_p4_init); 273 module_exit(cpufreq_p4_exit); 274