1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  Copyright (C) 2011 Dmitry Eremin-Solenikov
4  *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
5  *  and                       Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
6  *
7  * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
8  * that is iMac G5 and latest single CPU desktop.
9  */
10 
11 #undef DEBUG
12 
13 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
14 
15 #include <linux/module.h>
16 #include <linux/types.h>
17 #include <linux/errno.h>
18 #include <linux/kernel.h>
19 #include <linux/delay.h>
20 #include <linux/sched.h>
21 #include <linux/cpufreq.h>
22 #include <linux/init.h>
23 #include <linux/completion.h>
24 #include <linux/mutex.h>
25 #include <linux/time.h>
26 #include <linux/of.h>
27 
28 #define DBG(fmt...) pr_debug(fmt)
29 
30 /* see 970FX user manual */
31 
32 #define SCOM_PCR 0x0aa001			/* PCR scom addr */
33 
34 #define PCR_HILO_SELECT		0x80000000U	/* 1 = PCR, 0 = PCRH */
35 #define PCR_SPEED_FULL		0x00000000U	/* 1:1 speed value */
36 #define PCR_SPEED_HALF		0x00020000U	/* 1:2 speed value */
37 #define PCR_SPEED_QUARTER	0x00040000U	/* 1:4 speed value */
38 #define PCR_SPEED_MASK		0x000e0000U	/* speed mask */
39 #define PCR_SPEED_SHIFT		17
40 #define PCR_FREQ_REQ_VALID	0x00010000U	/* freq request valid */
41 #define PCR_VOLT_REQ_VALID	0x00008000U	/* volt request valid */
42 #define PCR_TARGET_TIME_MASK	0x00006000U	/* target time */
43 #define PCR_STATLAT_MASK	0x00001f00U	/* STATLAT value */
44 #define PCR_SNOOPLAT_MASK	0x000000f0U	/* SNOOPLAT value */
45 #define PCR_SNOOPACC_MASK	0x0000000fU	/* SNOOPACC value */
46 
47 #define SCOM_PSR 0x408001			/* PSR scom addr */
48 /* warning: PSR is a 64 bits register */
49 #define PSR_CMD_RECEIVED	0x2000000000000000U   /* command received */
50 #define PSR_CMD_COMPLETED	0x1000000000000000U   /* command completed */
51 #define PSR_CUR_SPEED_MASK	0x0300000000000000U   /* current speed */
52 #define PSR_CUR_SPEED_SHIFT	(56)
53 
54 /*
55  * The G5 only supports two frequencies (Quarter speed is not supported)
56  */
57 #define CPUFREQ_HIGH                  0
58 #define CPUFREQ_LOW                   1
59 
60 static struct cpufreq_frequency_table maple_cpu_freqs[] = {
61 	{0, CPUFREQ_HIGH,		0},
62 	{0, CPUFREQ_LOW,		0},
63 	{0, 0,				CPUFREQ_TABLE_END},
64 };
65 
66 /* Power mode data is an array of the 32 bits PCR values to use for
67  * the various frequencies, retrieved from the device-tree
68  */
69 static int maple_pmode_cur;
70 
71 static const u32 *maple_pmode_data;
72 static int maple_pmode_max;
73 
74 /*
75  * SCOM based frequency switching for 970FX rev3
76  */
77 static int maple_scom_switch_freq(int speed_mode)
78 {
79 	unsigned long flags;
80 	int to;
81 
82 	local_irq_save(flags);
83 
84 	/* Clear PCR high */
85 	scom970_write(SCOM_PCR, 0);
86 	/* Clear PCR low */
87 	scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
88 	/* Set PCR low */
89 	scom970_write(SCOM_PCR, PCR_HILO_SELECT |
90 		      maple_pmode_data[speed_mode]);
91 
92 	/* Wait for completion */
93 	for (to = 0; to < 10; to++) {
94 		unsigned long psr = scom970_read(SCOM_PSR);
95 
96 		if ((psr & PSR_CMD_RECEIVED) == 0 &&
97 		    (((psr >> PSR_CUR_SPEED_SHIFT) ^
98 		      (maple_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
99 		    == 0)
100 			break;
101 		if (psr & PSR_CMD_COMPLETED)
102 			break;
103 		udelay(100);
104 	}
105 
106 	local_irq_restore(flags);
107 
108 	maple_pmode_cur = speed_mode;
109 	ppc_proc_freq = maple_cpu_freqs[speed_mode].frequency * 1000ul;
110 
111 	return 0;
112 }
113 
114 static int maple_scom_query_freq(void)
115 {
116 	unsigned long psr = scom970_read(SCOM_PSR);
117 	int i;
118 
119 	for (i = 0; i <= maple_pmode_max; i++)
120 		if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
121 		      (maple_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
122 			break;
123 	return i;
124 }
125 
126 /*
127  * Common interface to the cpufreq core
128  */
129 
130 static int maple_cpufreq_target(struct cpufreq_policy *policy,
131 	unsigned int index)
132 {
133 	return maple_scom_switch_freq(index);
134 }
135 
136 static unsigned int maple_cpufreq_get_speed(unsigned int cpu)
137 {
138 	return maple_cpu_freqs[maple_pmode_cur].frequency;
139 }
140 
141 static int maple_cpufreq_cpu_init(struct cpufreq_policy *policy)
142 {
143 	cpufreq_generic_init(policy, maple_cpu_freqs, 12000);
144 	return 0;
145 }
146 
147 static struct cpufreq_driver maple_cpufreq_driver = {
148 	.name		= "maple",
149 	.flags		= CPUFREQ_CONST_LOOPS,
150 	.init		= maple_cpufreq_cpu_init,
151 	.verify		= cpufreq_generic_frequency_table_verify,
152 	.target_index	= maple_cpufreq_target,
153 	.get		= maple_cpufreq_get_speed,
154 	.attr		= cpufreq_generic_attr,
155 };
156 
157 static int __init maple_cpufreq_init(void)
158 {
159 	struct device_node *cpunode;
160 	unsigned int psize;
161 	unsigned long max_freq;
162 	const u32 *valp;
163 	u32 pvr_hi;
164 	int rc = -ENODEV;
165 
166 	/*
167 	 * Behave here like powermac driver which checks machine compatibility
168 	 * to ease merging of two drivers in future.
169 	 */
170 	if (!of_machine_is_compatible("Momentum,Maple") &&
171 	    !of_machine_is_compatible("Momentum,Apache"))
172 		return 0;
173 
174 	/* Get first CPU node */
175 	cpunode = of_cpu_device_node_get(0);
176 	if (cpunode == NULL) {
177 		pr_err("Can't find any CPU 0 node\n");
178 		goto bail_noprops;
179 	}
180 
181 	/* Check 970FX for now */
182 	/* we actually don't care on which CPU to access PVR */
183 	pvr_hi = PVR_VER(mfspr(SPRN_PVR));
184 	if (pvr_hi != 0x3c && pvr_hi != 0x44) {
185 		pr_err("Unsupported CPU version (%x)\n", pvr_hi);
186 		goto bail_noprops;
187 	}
188 
189 	/* Look for the powertune data in the device-tree */
190 	/*
191 	 * On Maple this property is provided by PIBS in dual-processor config,
192 	 * not provided by PIBS in CPU0 config and also not provided by SLOF,
193 	 * so YMMV
194 	 */
195 	maple_pmode_data = of_get_property(cpunode, "power-mode-data", &psize);
196 	if (!maple_pmode_data) {
197 		DBG("No power-mode-data !\n");
198 		goto bail_noprops;
199 	}
200 	maple_pmode_max = psize / sizeof(u32) - 1;
201 
202 	/*
203 	 * From what I see, clock-frequency is always the maximal frequency.
204 	 * The current driver can not slew sysclk yet, so we really only deal
205 	 * with powertune steps for now. We also only implement full freq and
206 	 * half freq in this version. So far, I haven't yet seen a machine
207 	 * supporting anything else.
208 	 */
209 	valp = of_get_property(cpunode, "clock-frequency", NULL);
210 	if (!valp)
211 		goto bail_noprops;
212 	max_freq = (*valp)/1000;
213 	maple_cpu_freqs[0].frequency = max_freq;
214 	maple_cpu_freqs[1].frequency = max_freq/2;
215 
216 	/* Force apply current frequency to make sure everything is in
217 	 * sync (voltage is right for example). Firmware may leave us with
218 	 * a strange setting ...
219 	 */
220 	msleep(10);
221 	maple_pmode_cur = -1;
222 	maple_scom_switch_freq(maple_scom_query_freq());
223 
224 	pr_info("Registering Maple CPU frequency driver\n");
225 	pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
226 		maple_cpu_freqs[1].frequency/1000,
227 		maple_cpu_freqs[0].frequency/1000,
228 		maple_cpu_freqs[maple_pmode_cur].frequency/1000);
229 
230 	rc = cpufreq_register_driver(&maple_cpufreq_driver);
231 
232 bail_noprops:
233 	of_node_put(cpunode);
234 
235 	return rc;
236 }
237 
238 module_init(maple_cpufreq_init);
239 
240 
241 MODULE_LICENSE("GPL");
242