xref: /openbmc/linux/drivers/cpufreq/longrun.c (revision 5497b23e)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * (C) 2002 - 2003  Dominik Brodowski <linux@brodo.de>
4  *
5  *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
6  */
7 
8 #include <linux/kernel.h>
9 #include <linux/module.h>
10 #include <linux/init.h>
11 #include <linux/cpufreq.h>
12 #include <linux/timex.h>
13 
14 #include <asm/msr.h>
15 #include <asm/processor.h>
16 #include <asm/cpu_device_id.h>
17 
18 static struct cpufreq_driver	longrun_driver;
19 
20 /**
21  * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz
22  * values into per cent values. In TMTA microcode, the following is valid:
23  * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
24  */
25 static unsigned int longrun_low_freq, longrun_high_freq;
26 
27 
28 /**
29  * longrun_get_policy - get the current LongRun policy
30  * @policy: struct cpufreq_policy where current policy is written into
31  *
32  * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS
33  * and MSR_TMTA_LONGRUN_CTRL
34  */
35 static void longrun_get_policy(struct cpufreq_policy *policy)
36 {
37 	u32 msr_lo, msr_hi;
38 
39 	rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
40 	pr_debug("longrun flags are %x - %x\n", msr_lo, msr_hi);
41 	if (msr_lo & 0x01)
42 		policy->policy = CPUFREQ_POLICY_PERFORMANCE;
43 	else
44 		policy->policy = CPUFREQ_POLICY_POWERSAVE;
45 
46 	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
47 	pr_debug("longrun ctrl is %x - %x\n", msr_lo, msr_hi);
48 	msr_lo &= 0x0000007F;
49 	msr_hi &= 0x0000007F;
50 
51 	if (longrun_high_freq <= longrun_low_freq) {
52 		/* Assume degenerate Longrun table */
53 		policy->min = policy->max = longrun_high_freq;
54 	} else {
55 		policy->min = longrun_low_freq + msr_lo *
56 			((longrun_high_freq - longrun_low_freq) / 100);
57 		policy->max = longrun_low_freq + msr_hi *
58 			((longrun_high_freq - longrun_low_freq) / 100);
59 	}
60 	policy->cpu = 0;
61 }
62 
63 
64 /**
65  * longrun_set_policy - sets a new CPUFreq policy
66  * @policy: new policy
67  *
68  * Sets a new CPUFreq policy on LongRun-capable processors. This function
69  * has to be called with cpufreq_driver locked.
70  */
71 static int longrun_set_policy(struct cpufreq_policy *policy)
72 {
73 	u32 msr_lo, msr_hi;
74 	u32 pctg_lo, pctg_hi;
75 
76 	if (!policy)
77 		return -EINVAL;
78 
79 	if (longrun_high_freq <= longrun_low_freq) {
80 		/* Assume degenerate Longrun table */
81 		pctg_lo = pctg_hi = 100;
82 	} else {
83 		pctg_lo = (policy->min - longrun_low_freq) /
84 			((longrun_high_freq - longrun_low_freq) / 100);
85 		pctg_hi = (policy->max - longrun_low_freq) /
86 			((longrun_high_freq - longrun_low_freq) / 100);
87 	}
88 
89 	if (pctg_hi > 100)
90 		pctg_hi = 100;
91 	if (pctg_lo > pctg_hi)
92 		pctg_lo = pctg_hi;
93 
94 	/* performance or economy mode */
95 	rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
96 	msr_lo &= 0xFFFFFFFE;
97 	switch (policy->policy) {
98 	case CPUFREQ_POLICY_PERFORMANCE:
99 		msr_lo |= 0x00000001;
100 		break;
101 	case CPUFREQ_POLICY_POWERSAVE:
102 		break;
103 	}
104 	wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
105 
106 	/* lower and upper boundary */
107 	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
108 	msr_lo &= 0xFFFFFF80;
109 	msr_hi &= 0xFFFFFF80;
110 	msr_lo |= pctg_lo;
111 	msr_hi |= pctg_hi;
112 	wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
113 
114 	return 0;
115 }
116 
117 
118 /**
119  * longrun_verify_poliy - verifies a new CPUFreq policy
120  * @policy: the policy to verify
121  *
122  * Validates a new CPUFreq policy. This function has to be called with
123  * cpufreq_driver locked.
124  */
125 static int longrun_verify_policy(struct cpufreq_policy_data *policy)
126 {
127 	if (!policy)
128 		return -EINVAL;
129 
130 	policy->cpu = 0;
131 	cpufreq_verify_within_cpu_limits(policy);
132 
133 	return 0;
134 }
135 
136 static unsigned int longrun_get(unsigned int cpu)
137 {
138 	u32 eax, ebx, ecx, edx;
139 
140 	if (cpu)
141 		return 0;
142 
143 	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
144 	pr_debug("cpuid eax is %u\n", eax);
145 
146 	return eax * 1000;
147 }
148 
149 /**
150  * longrun_determine_freqs - determines the lowest and highest possible core frequency
151  * @low_freq: an int to put the lowest frequency into
152  * @high_freq: an int to put the highest frequency into
153  *
154  * Determines the lowest and highest possible core frequencies on this CPU.
155  * This is necessary to calculate the performance percentage according to
156  * TMTA rules:
157  * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq)
158  */
159 static int longrun_determine_freqs(unsigned int *low_freq,
160 						      unsigned int *high_freq)
161 {
162 	u32 msr_lo, msr_hi;
163 	u32 save_lo, save_hi;
164 	u32 eax, ebx, ecx, edx;
165 	u32 try_hi;
166 	struct cpuinfo_x86 *c = &cpu_data(0);
167 
168 	if (!low_freq || !high_freq)
169 		return -EINVAL;
170 
171 	if (cpu_has(c, X86_FEATURE_LRTI)) {
172 		/* if the LongRun Table Interface is present, the
173 		 * detection is a bit easier:
174 		 * For minimum frequency, read out the maximum
175 		 * level (msr_hi), write that into "currently
176 		 * selected level", and read out the frequency.
177 		 * For maximum frequency, read out level zero.
178 		 */
179 		/* minimum */
180 		rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi);
181 		wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi);
182 		rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
183 		*low_freq = msr_lo * 1000; /* to kHz */
184 
185 		/* maximum */
186 		wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi);
187 		rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
188 		*high_freq = msr_lo * 1000; /* to kHz */
189 
190 		pr_debug("longrun table interface told %u - %u kHz\n",
191 				*low_freq, *high_freq);
192 
193 		if (*low_freq > *high_freq)
194 			*low_freq = *high_freq;
195 		return 0;
196 	}
197 
198 	/* set the upper border to the value determined during TSC init */
199 	*high_freq = (cpu_khz / 1000);
200 	*high_freq = *high_freq * 1000;
201 	pr_debug("high frequency is %u kHz\n", *high_freq);
202 
203 	/* get current borders */
204 	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
205 	save_lo = msr_lo & 0x0000007F;
206 	save_hi = msr_hi & 0x0000007F;
207 
208 	/* if current perf_pctg is larger than 90%, we need to decrease the
209 	 * upper limit to make the calculation more accurate.
210 	 */
211 	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
212 	/* try decreasing in 10% steps, some processors react only
213 	 * on some barrier values */
214 	for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) {
215 		/* set to 0 to try_hi perf_pctg */
216 		msr_lo &= 0xFFFFFF80;
217 		msr_hi &= 0xFFFFFF80;
218 		msr_hi |= try_hi;
219 		wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
220 
221 		/* read out current core MHz and current perf_pctg */
222 		cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
223 
224 		/* restore values */
225 		wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi);
226 	}
227 	pr_debug("percentage is %u %%, freq is %u MHz\n", ecx, eax);
228 
229 	/* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
230 	 * eqals
231 	 * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg)
232 	 *
233 	 * high_freq * perf_pctg is stored tempoarily into "ebx".
234 	 */
235 	ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */
236 
237 	if ((ecx > 95) || (ecx == 0) || (eax < ebx))
238 		return -EIO;
239 
240 	edx = ((eax - ebx) * 100) / (100 - ecx);
241 	*low_freq = edx * 1000; /* back to kHz */
242 
243 	pr_debug("low frequency is %u kHz\n", *low_freq);
244 
245 	if (*low_freq > *high_freq)
246 		*low_freq = *high_freq;
247 
248 	return 0;
249 }
250 
251 
252 static int longrun_cpu_init(struct cpufreq_policy *policy)
253 {
254 	int result = 0;
255 
256 	/* capability check */
257 	if (policy->cpu != 0)
258 		return -ENODEV;
259 
260 	/* detect low and high frequency */
261 	result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq);
262 	if (result)
263 		return result;
264 
265 	/* cpuinfo and default policy values */
266 	policy->cpuinfo.min_freq = longrun_low_freq;
267 	policy->cpuinfo.max_freq = longrun_high_freq;
268 	longrun_get_policy(policy);
269 
270 	return 0;
271 }
272 
273 
274 static struct cpufreq_driver longrun_driver = {
275 	.flags		= CPUFREQ_CONST_LOOPS,
276 	.verify		= longrun_verify_policy,
277 	.setpolicy	= longrun_set_policy,
278 	.get		= longrun_get,
279 	.init		= longrun_cpu_init,
280 	.name		= "longrun",
281 };
282 
283 static const struct x86_cpu_id longrun_ids[] = {
284 	X86_MATCH_VENDOR_FEATURE(TRANSMETA, X86_FEATURE_LONGRUN, NULL),
285 	{}
286 };
287 MODULE_DEVICE_TABLE(x86cpu, longrun_ids);
288 
289 /**
290  * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver
291  *
292  * Initializes the LongRun support.
293  */
294 static int __init longrun_init(void)
295 {
296 	if (!x86_match_cpu(longrun_ids))
297 		return -ENODEV;
298 	return cpufreq_register_driver(&longrun_driver);
299 }
300 
301 
302 /**
303  * longrun_exit - unregisters LongRun support
304  */
305 static void __exit longrun_exit(void)
306 {
307 	cpufreq_unregister_driver(&longrun_driver);
308 }
309 
310 
311 MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
312 MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and "
313 		"Efficeon processors.");
314 MODULE_LICENSE("GPL");
315 
316 module_init(longrun_init);
317 module_exit(longrun_exit);
318