1 /*
2  *	kirkwood_freq.c: cpufreq driver for the Marvell kirkwood
3  *
4  *	Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
5  *
6  *	This program is free software; you can redistribute it and/or
7  *	modify it under the terms of the GNU General Public License
8  *	as published by the Free Software Foundation; either version
9  *	2 of the License, or (at your option) any later version.
10  */
11 
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/clk.h>
15 #include <linux/clk-provider.h>
16 #include <linux/cpufreq.h>
17 #include <linux/of_device.h>
18 #include <linux/platform_device.h>
19 #include <linux/io.h>
20 #include <asm/proc-fns.h>
21 
22 #define CPU_SW_INT_BLK BIT(28)
23 
24 static struct priv
25 {
26 	struct clk *cpu_clk;
27 	struct clk *ddr_clk;
28 	struct clk *powersave_clk;
29 	struct device *dev;
30 	void __iomem *base;
31 } priv;
32 
33 #define STATE_CPU_FREQ 0x01
34 #define STATE_DDR_FREQ 0x02
35 
36 /*
37  * Kirkwood can swap the clock to the CPU between two clocks:
38  *
39  * - cpu clk
40  * - ddr clk
41  *
42  * The frequencies are set at runtime before registering this *
43  * table.
44  */
45 static struct cpufreq_frequency_table kirkwood_freq_table[] = {
46 	{STATE_CPU_FREQ,	0}, /* CPU uses cpuclk */
47 	{STATE_DDR_FREQ,	0}, /* CPU uses ddrclk */
48 	{0,			CPUFREQ_TABLE_END},
49 };
50 
51 static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu)
52 {
53 	if (__clk_is_enabled(priv.powersave_clk))
54 		return kirkwood_freq_table[1].frequency;
55 	return kirkwood_freq_table[0].frequency;
56 }
57 
58 static int kirkwood_cpufreq_target(struct cpufreq_policy *policy,
59 			    unsigned int index)
60 {
61 	unsigned int state = kirkwood_freq_table[index].driver_data;
62 	unsigned long reg;
63 
64 	local_irq_disable();
65 
66 	/* Disable interrupts to the CPU */
67 	reg = readl_relaxed(priv.base);
68 	reg |= CPU_SW_INT_BLK;
69 	writel_relaxed(reg, priv.base);
70 
71 	switch (state) {
72 	case STATE_CPU_FREQ:
73 		clk_disable(priv.powersave_clk);
74 		break;
75 	case STATE_DDR_FREQ:
76 		clk_enable(priv.powersave_clk);
77 		break;
78 	}
79 
80 	/* Wait-for-Interrupt, while the hardware changes frequency */
81 	cpu_do_idle();
82 
83 	/* Enable interrupts to the CPU */
84 	reg = readl_relaxed(priv.base);
85 	reg &= ~CPU_SW_INT_BLK;
86 	writel_relaxed(reg, priv.base);
87 
88 	local_irq_enable();
89 
90 	return 0;
91 }
92 
93 /* Module init and exit code */
94 static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy)
95 {
96 	return cpufreq_generic_init(policy, kirkwood_freq_table, 5000);
97 }
98 
99 static struct cpufreq_driver kirkwood_cpufreq_driver = {
100 	.get	= kirkwood_cpufreq_get_cpu_frequency,
101 	.verify	= cpufreq_generic_frequency_table_verify,
102 	.target_index = kirkwood_cpufreq_target,
103 	.init	= kirkwood_cpufreq_cpu_init,
104 	.exit	= cpufreq_generic_exit,
105 	.name	= "kirkwood-cpufreq",
106 	.attr	= cpufreq_generic_attr,
107 };
108 
109 static int kirkwood_cpufreq_probe(struct platform_device *pdev)
110 {
111 	struct device_node *np;
112 	struct resource *res;
113 	int err;
114 
115 	priv.dev = &pdev->dev;
116 
117 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
118 	priv.base = devm_ioremap_resource(&pdev->dev, res);
119 	if (IS_ERR(priv.base))
120 		return PTR_ERR(priv.base);
121 
122 	np = of_cpu_device_node_get(0);
123 	if (!np) {
124 		dev_err(&pdev->dev, "failed to get cpu device node\n");
125 		return -ENODEV;
126 	}
127 
128 	priv.cpu_clk = of_clk_get_by_name(np, "cpu_clk");
129 	if (IS_ERR(priv.cpu_clk)) {
130 		dev_err(priv.dev, "Unable to get cpuclk");
131 		return PTR_ERR(priv.cpu_clk);
132 	}
133 
134 	clk_prepare_enable(priv.cpu_clk);
135 	kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000;
136 
137 	priv.ddr_clk = of_clk_get_by_name(np, "ddrclk");
138 	if (IS_ERR(priv.ddr_clk)) {
139 		dev_err(priv.dev, "Unable to get ddrclk");
140 		err = PTR_ERR(priv.ddr_clk);
141 		goto out_cpu;
142 	}
143 
144 	clk_prepare_enable(priv.ddr_clk);
145 	kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000;
146 
147 	priv.powersave_clk = of_clk_get_by_name(np, "powersave");
148 	if (IS_ERR(priv.powersave_clk)) {
149 		dev_err(priv.dev, "Unable to get powersave");
150 		err = PTR_ERR(priv.powersave_clk);
151 		goto out_ddr;
152 	}
153 	clk_prepare(priv.powersave_clk);
154 
155 	of_node_put(np);
156 	np = NULL;
157 
158 	err = cpufreq_register_driver(&kirkwood_cpufreq_driver);
159 	if (!err)
160 		return 0;
161 
162 	dev_err(priv.dev, "Failed to register cpufreq driver");
163 
164 	clk_disable_unprepare(priv.powersave_clk);
165 out_ddr:
166 	clk_disable_unprepare(priv.ddr_clk);
167 out_cpu:
168 	clk_disable_unprepare(priv.cpu_clk);
169 	of_node_put(np);
170 
171 	return err;
172 }
173 
174 static int kirkwood_cpufreq_remove(struct platform_device *pdev)
175 {
176 	cpufreq_unregister_driver(&kirkwood_cpufreq_driver);
177 
178 	clk_disable_unprepare(priv.powersave_clk);
179 	clk_disable_unprepare(priv.ddr_clk);
180 	clk_disable_unprepare(priv.cpu_clk);
181 
182 	return 0;
183 }
184 
185 static struct platform_driver kirkwood_cpufreq_platform_driver = {
186 	.probe = kirkwood_cpufreq_probe,
187 	.remove = kirkwood_cpufreq_remove,
188 	.driver = {
189 		.name = "kirkwood-cpufreq",
190 		.owner = THIS_MODULE,
191 	},
192 };
193 
194 module_platform_driver(kirkwood_cpufreq_platform_driver);
195 
196 MODULE_LICENSE("GPL v2");
197 MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch");
198 MODULE_DESCRIPTION("cpufreq driver for Marvell's kirkwood CPU");
199 MODULE_ALIAS("platform:kirkwood-cpufreq");
200