1 /* 2 * elanfreq: cpufreq driver for the AMD ELAN family 3 * 4 * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de> 5 * 6 * Parts of this code are (c) Sven Geggus <sven@geggus.net> 7 * 8 * All Rights Reserved. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License 12 * as published by the Free Software Foundation; either version 13 * 2 of the License, or (at your option) any later version. 14 * 15 * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel 16 * 17 */ 18 19 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 20 21 #include <linux/kernel.h> 22 #include <linux/module.h> 23 #include <linux/init.h> 24 25 #include <linux/delay.h> 26 #include <linux/cpufreq.h> 27 28 #include <asm/cpu_device_id.h> 29 #include <asm/msr.h> 30 #include <linux/timex.h> 31 #include <linux/io.h> 32 33 #define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ 34 #define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */ 35 36 /* Module parameter */ 37 static int max_freq; 38 39 struct s_elan_multiplier { 40 int clock; /* frequency in kHz */ 41 int val40h; /* PMU Force Mode register */ 42 int val80h; /* CPU Clock Speed Register */ 43 }; 44 45 /* 46 * It is important that the frequencies 47 * are listed in ascending order here! 48 */ 49 static struct s_elan_multiplier elan_multiplier[] = { 50 {1000, 0x02, 0x18}, 51 {2000, 0x02, 0x10}, 52 {4000, 0x02, 0x08}, 53 {8000, 0x00, 0x00}, 54 {16000, 0x00, 0x02}, 55 {33000, 0x00, 0x04}, 56 {66000, 0x01, 0x04}, 57 {99000, 0x01, 0x05} 58 }; 59 60 static struct cpufreq_frequency_table elanfreq_table[] = { 61 {0, 0, 1000}, 62 {0, 1, 2000}, 63 {0, 2, 4000}, 64 {0, 3, 8000}, 65 {0, 4, 16000}, 66 {0, 5, 33000}, 67 {0, 6, 66000}, 68 {0, 7, 99000}, 69 {0, 0, CPUFREQ_TABLE_END}, 70 }; 71 72 73 /** 74 * elanfreq_get_cpu_frequency: determine current cpu speed 75 * 76 * Finds out at which frequency the CPU of the Elan SOC runs 77 * at the moment. Frequencies from 1 to 33 MHz are generated 78 * the normal way, 66 and 99 MHz are called "Hyperspeed Mode" 79 * and have the rest of the chip running with 33 MHz. 80 */ 81 82 static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) 83 { 84 u8 clockspeed_reg; /* Clock Speed Register */ 85 86 local_irq_disable(); 87 outb_p(0x80, REG_CSCIR); 88 clockspeed_reg = inb_p(REG_CSCDR); 89 local_irq_enable(); 90 91 if ((clockspeed_reg & 0xE0) == 0xE0) 92 return 0; 93 94 /* Are we in CPU clock multiplied mode (66/99 MHz)? */ 95 if ((clockspeed_reg & 0xE0) == 0xC0) { 96 if ((clockspeed_reg & 0x01) == 0) 97 return 66000; 98 else 99 return 99000; 100 } 101 102 /* 33 MHz is not 32 MHz... */ 103 if ((clockspeed_reg & 0xE0) == 0xA0) 104 return 33000; 105 106 return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000; 107 } 108 109 110 static int elanfreq_target(struct cpufreq_policy *policy, 111 unsigned int state) 112 { 113 /* 114 * Access to the Elan's internal registers is indexed via 115 * 0x22: Chip Setup & Control Register Index Register (CSCI) 116 * 0x23: Chip Setup & Control Register Data Register (CSCD) 117 * 118 */ 119 120 /* 121 * 0x40 is the Power Management Unit's Force Mode Register. 122 * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency) 123 */ 124 125 local_irq_disable(); 126 outb_p(0x40, REG_CSCIR); /* Disable hyperspeed mode */ 127 outb_p(0x00, REG_CSCDR); 128 local_irq_enable(); /* wait till internal pipelines and */ 129 udelay(1000); /* buffers have cleaned up */ 130 131 local_irq_disable(); 132 133 /* now, set the CPU clock speed register (0x80) */ 134 outb_p(0x80, REG_CSCIR); 135 outb_p(elan_multiplier[state].val80h, REG_CSCDR); 136 137 /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */ 138 outb_p(0x40, REG_CSCIR); 139 outb_p(elan_multiplier[state].val40h, REG_CSCDR); 140 udelay(10000); 141 local_irq_enable(); 142 143 return 0; 144 } 145 /* 146 * Module init and exit code 147 */ 148 149 static int elanfreq_cpu_init(struct cpufreq_policy *policy) 150 { 151 struct cpuinfo_x86 *c = &cpu_data(0); 152 struct cpufreq_frequency_table *pos; 153 154 /* capability check */ 155 if ((c->x86_vendor != X86_VENDOR_AMD) || 156 (c->x86 != 4) || (c->x86_model != 10)) 157 return -ENODEV; 158 159 /* max freq */ 160 if (!max_freq) 161 max_freq = elanfreq_get_cpu_frequency(0); 162 163 /* table init */ 164 cpufreq_for_each_entry(pos, elanfreq_table) 165 if (pos->frequency > max_freq) 166 pos->frequency = CPUFREQ_ENTRY_INVALID; 167 168 return cpufreq_table_validate_and_show(policy, elanfreq_table); 169 } 170 171 172 #ifndef MODULE 173 /** 174 * elanfreq_setup - elanfreq command line parameter parsing 175 * 176 * elanfreq command line parameter. Use: 177 * elanfreq=66000 178 * to set the maximum CPU frequency to 66 MHz. Note that in 179 * case you do not give this boot parameter, the maximum 180 * frequency will fall back to _current_ CPU frequency which 181 * might be lower. If you build this as a module, use the 182 * max_freq module parameter instead. 183 */ 184 static int __init elanfreq_setup(char *str) 185 { 186 max_freq = simple_strtoul(str, &str, 0); 187 pr_warn("You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n"); 188 return 1; 189 } 190 __setup("elanfreq=", elanfreq_setup); 191 #endif 192 193 194 static struct cpufreq_driver elanfreq_driver = { 195 .get = elanfreq_get_cpu_frequency, 196 .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, 197 .verify = cpufreq_generic_frequency_table_verify, 198 .target_index = elanfreq_target, 199 .init = elanfreq_cpu_init, 200 .name = "elanfreq", 201 .attr = cpufreq_generic_attr, 202 }; 203 204 static const struct x86_cpu_id elan_id[] = { 205 { X86_VENDOR_AMD, 4, 10, }, 206 {} 207 }; 208 MODULE_DEVICE_TABLE(x86cpu, elan_id); 209 210 static int __init elanfreq_init(void) 211 { 212 if (!x86_match_cpu(elan_id)) 213 return -ENODEV; 214 return cpufreq_register_driver(&elanfreq_driver); 215 } 216 217 218 static void __exit elanfreq_exit(void) 219 { 220 cpufreq_unregister_driver(&elanfreq_driver); 221 } 222 223 224 module_param(max_freq, int, 0444); 225 226 MODULE_LICENSE("GPL"); 227 MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, " 228 "Sven Geggus <sven@geggus.net>"); 229 MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs"); 230 231 module_init(elanfreq_init); 232 module_exit(elanfreq_exit); 233