xref: /openbmc/linux/drivers/cpufreq/elanfreq.c (revision 6197e5b7)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *	elanfreq:	cpufreq driver for the AMD ELAN family
4  *
5  *	(c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
6  *
7  *	Parts of this code are (c) Sven Geggus <sven@geggus.net>
8  *
9  *      All Rights Reserved.
10  *
11  *	2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
12  */
13 
14 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
15 
16 #include <linux/kernel.h>
17 #include <linux/module.h>
18 #include <linux/init.h>
19 
20 #include <linux/delay.h>
21 #include <linux/cpufreq.h>
22 
23 #include <asm/cpu_device_id.h>
24 #include <asm/msr.h>
25 #include <linux/timex.h>
26 #include <linux/io.h>
27 
28 #define REG_CSCIR 0x22		/* Chip Setup and Control Index Register    */
29 #define REG_CSCDR 0x23		/* Chip Setup and Control Data  Register    */
30 
31 /* Module parameter */
32 static int max_freq;
33 
34 struct s_elan_multiplier {
35 	int clock;		/* frequency in kHz                         */
36 	int val40h;		/* PMU Force Mode register                  */
37 	int val80h;		/* CPU Clock Speed Register                 */
38 };
39 
40 /*
41  * It is important that the frequencies
42  * are listed in ascending order here!
43  */
44 static struct s_elan_multiplier elan_multiplier[] = {
45 	{1000,	0x02,	0x18},
46 	{2000,	0x02,	0x10},
47 	{4000,	0x02,	0x08},
48 	{8000,	0x00,	0x00},
49 	{16000,	0x00,	0x02},
50 	{33000,	0x00,	0x04},
51 	{66000,	0x01,	0x04},
52 	{99000,	0x01,	0x05}
53 };
54 
55 static struct cpufreq_frequency_table elanfreq_table[] = {
56 	{0, 0,	1000},
57 	{0, 1,	2000},
58 	{0, 2,	4000},
59 	{0, 3,	8000},
60 	{0, 4,	16000},
61 	{0, 5,	33000},
62 	{0, 6,	66000},
63 	{0, 7,	99000},
64 	{0, 0,	CPUFREQ_TABLE_END},
65 };
66 
67 
68 /**
69  *	elanfreq_get_cpu_frequency: determine current cpu speed
70  *
71  *	Finds out at which frequency the CPU of the Elan SOC runs
72  *	at the moment. Frequencies from 1 to 33 MHz are generated
73  *	the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
74  *	and have the rest of the chip running with 33 MHz.
75  */
76 
77 static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
78 {
79 	u8 clockspeed_reg;    /* Clock Speed Register */
80 
81 	local_irq_disable();
82 	outb_p(0x80, REG_CSCIR);
83 	clockspeed_reg = inb_p(REG_CSCDR);
84 	local_irq_enable();
85 
86 	if ((clockspeed_reg & 0xE0) == 0xE0)
87 		return 0;
88 
89 	/* Are we in CPU clock multiplied mode (66/99 MHz)? */
90 	if ((clockspeed_reg & 0xE0) == 0xC0) {
91 		if ((clockspeed_reg & 0x01) == 0)
92 			return 66000;
93 		else
94 			return 99000;
95 	}
96 
97 	/* 33 MHz is not 32 MHz... */
98 	if ((clockspeed_reg & 0xE0) == 0xA0)
99 		return 33000;
100 
101 	return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000;
102 }
103 
104 
105 static int elanfreq_target(struct cpufreq_policy *policy,
106 			    unsigned int state)
107 {
108 	/*
109 	 * Access to the Elan's internal registers is indexed via
110 	 * 0x22: Chip Setup & Control Register Index Register (CSCI)
111 	 * 0x23: Chip Setup & Control Register Data  Register (CSCD)
112 	 *
113 	 */
114 
115 	/*
116 	 * 0x40 is the Power Management Unit's Force Mode Register.
117 	 * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
118 	 */
119 
120 	local_irq_disable();
121 	outb_p(0x40, REG_CSCIR);		/* Disable hyperspeed mode */
122 	outb_p(0x00, REG_CSCDR);
123 	local_irq_enable();		/* wait till internal pipelines and */
124 	udelay(1000);			/* buffers have cleaned up          */
125 
126 	local_irq_disable();
127 
128 	/* now, set the CPU clock speed register (0x80) */
129 	outb_p(0x80, REG_CSCIR);
130 	outb_p(elan_multiplier[state].val80h, REG_CSCDR);
131 
132 	/* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
133 	outb_p(0x40, REG_CSCIR);
134 	outb_p(elan_multiplier[state].val40h, REG_CSCDR);
135 	udelay(10000);
136 	local_irq_enable();
137 
138 	return 0;
139 }
140 /*
141  *	Module init and exit code
142  */
143 
144 static int elanfreq_cpu_init(struct cpufreq_policy *policy)
145 {
146 	struct cpuinfo_x86 *c = &cpu_data(0);
147 	struct cpufreq_frequency_table *pos;
148 
149 	/* capability check */
150 	if ((c->x86_vendor != X86_VENDOR_AMD) ||
151 	    (c->x86 != 4) || (c->x86_model != 10))
152 		return -ENODEV;
153 
154 	/* max freq */
155 	if (!max_freq)
156 		max_freq = elanfreq_get_cpu_frequency(0);
157 
158 	/* table init */
159 	cpufreq_for_each_entry(pos, elanfreq_table)
160 		if (pos->frequency > max_freq)
161 			pos->frequency = CPUFREQ_ENTRY_INVALID;
162 
163 	policy->freq_table = elanfreq_table;
164 	return 0;
165 }
166 
167 
168 #ifndef MODULE
169 /**
170  * elanfreq_setup - elanfreq command line parameter parsing
171  *
172  * elanfreq command line parameter.  Use:
173  *  elanfreq=66000
174  * to set the maximum CPU frequency to 66 MHz. Note that in
175  * case you do not give this boot parameter, the maximum
176  * frequency will fall back to _current_ CPU frequency which
177  * might be lower. If you build this as a module, use the
178  * max_freq module parameter instead.
179  */
180 static int __init elanfreq_setup(char *str)
181 {
182 	max_freq = simple_strtoul(str, &str, 0);
183 	pr_warn("You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
184 	return 1;
185 }
186 __setup("elanfreq=", elanfreq_setup);
187 #endif
188 
189 
190 static struct cpufreq_driver elanfreq_driver = {
191 	.get		= elanfreq_get_cpu_frequency,
192 	.flags		= CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
193 	.verify		= cpufreq_generic_frequency_table_verify,
194 	.target_index	= elanfreq_target,
195 	.init		= elanfreq_cpu_init,
196 	.name		= "elanfreq",
197 	.attr		= cpufreq_generic_attr,
198 };
199 
200 static const struct x86_cpu_id elan_id[] = {
201 	X86_MATCH_VENDOR_FAM_MODEL(AMD, 4, 10, NULL),
202 	{}
203 };
204 MODULE_DEVICE_TABLE(x86cpu, elan_id);
205 
206 static int __init elanfreq_init(void)
207 {
208 	if (!x86_match_cpu(elan_id))
209 		return -ENODEV;
210 	return cpufreq_register_driver(&elanfreq_driver);
211 }
212 
213 
214 static void __exit elanfreq_exit(void)
215 {
216 	cpufreq_unregister_driver(&elanfreq_driver);
217 }
218 
219 
220 module_param(max_freq, int, 0444);
221 
222 MODULE_LICENSE("GPL");
223 MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, "
224 		"Sven Geggus <sven@geggus.net>");
225 MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
226 
227 module_init(elanfreq_init);
228 module_exit(elanfreq_exit);
229