1 // SPDX-License-Identifier: GPL-2.0-only
2 /**
3  * timer-ti-32k.c - OMAP2 32k Timer Support
4  *
5  * Copyright (C) 2009 Nokia Corporation
6  *
7  * Update to use new clocksource/clockevent layers
8  * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
9  * Copyright (C) 2007 MontaVista Software, Inc.
10  *
11  * Original driver:
12  * Copyright (C) 2005 Nokia Corporation
13  * Author: Paul Mundt <paul.mundt@nokia.com>
14  *         Juha Yrjölä <juha.yrjola@nokia.com>
15  * OMAP Dual-mode timer framework support by Timo Teras
16  *
17  * Some parts based off of TI's 24xx code:
18  *
19  * Copyright (C) 2004-2009 Texas Instruments, Inc.
20  *
21  * Roughly modelled after the OMAP1 MPU timer code.
22  * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
23  *
24  * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
25  */
26 
27 #include <linux/clk.h>
28 #include <linux/init.h>
29 #include <linux/time.h>
30 #include <linux/sched_clock.h>
31 #include <linux/clocksource.h>
32 #include <linux/of.h>
33 #include <linux/of_address.h>
34 
35 /*
36  * 32KHz clocksource ... always available, on pretty most chips except
37  * OMAP 730 and 1510.  Other timers could be used as clocksources, with
38  * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
39  * but systems won't necessarily want to spend resources that way.
40  */
41 
42 #define OMAP2_32KSYNCNT_REV_OFF		0x0
43 #define OMAP2_32KSYNCNT_REV_SCHEME	(0x3 << 30)
44 #define OMAP2_32KSYNCNT_CR_OFF_LOW	0x10
45 #define OMAP2_32KSYNCNT_CR_OFF_HIGH	0x30
46 
47 struct ti_32k {
48 	void __iomem		*base;
49 	void __iomem		*counter;
50 	struct clocksource	cs;
51 };
52 
53 static inline struct ti_32k *to_ti_32k(struct clocksource *cs)
54 {
55 	return container_of(cs, struct ti_32k, cs);
56 }
57 
58 static u64 notrace ti_32k_read_cycles(struct clocksource *cs)
59 {
60 	struct ti_32k *ti = to_ti_32k(cs);
61 
62 	return (u64)readl_relaxed(ti->counter);
63 }
64 
65 static struct ti_32k ti_32k_timer = {
66 	.cs = {
67 		.name		= "32k_counter",
68 		.rating		= 250,
69 		.read		= ti_32k_read_cycles,
70 		.mask		= CLOCKSOURCE_MASK(32),
71 		.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
72 	},
73 };
74 
75 static u64 notrace omap_32k_read_sched_clock(void)
76 {
77 	return ti_32k_read_cycles(&ti_32k_timer.cs);
78 }
79 
80 static void __init ti_32k_timer_enable_clock(struct device_node *np,
81 					     const char *name)
82 {
83 	struct clk *clock;
84 	int error;
85 
86 	clock = of_clk_get_by_name(np->parent, name);
87 	if (IS_ERR(clock)) {
88 		/* Only some SoCs have a separate interface clock */
89 		if (PTR_ERR(clock) == -EINVAL && !strncmp("ick", name, 3))
90 			return;
91 
92 		pr_warn("%s: could not get clock %s %li\n",
93 			__func__, name, PTR_ERR(clock));
94 		return;
95 	}
96 
97 	error = clk_prepare_enable(clock);
98 	if (error) {
99 		pr_warn("%s: could not enable %s: %i\n",
100 			__func__, name, error);
101 		return;
102 	}
103 }
104 
105 static void __init ti_32k_timer_module_init(struct device_node *np,
106 					    void __iomem *base)
107 {
108 	void __iomem *sysc = base + 4;
109 
110 	if (!of_device_is_compatible(np->parent, "ti,sysc"))
111 		return;
112 
113 	ti_32k_timer_enable_clock(np, "fck");
114 	ti_32k_timer_enable_clock(np, "ick");
115 
116 	/*
117 	 * Force idle module as wkup domain is active with MPU.
118 	 * No need to tag the module disabled for ti-sysc probe.
119 	 */
120 	writel_relaxed(0, sysc);
121 }
122 
123 static int __init ti_32k_timer_init(struct device_node *np)
124 {
125 	int ret;
126 
127 	ti_32k_timer.base = of_iomap(np, 0);
128 	if (!ti_32k_timer.base) {
129 		pr_err("Can't ioremap 32k timer base\n");
130 		return -ENXIO;
131 	}
132 
133 	if (!of_machine_is_compatible("ti,am43"))
134 		ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
135 
136 	ti_32k_timer.counter = ti_32k_timer.base;
137 	ti_32k_timer_module_init(np, ti_32k_timer.base);
138 
139 	/*
140 	 * 32k sync Counter IP register offsets vary between the highlander
141 	 * version and the legacy ones.
142 	 *
143 	 * The 'SCHEME' bits(30-31) of the revision register is used to identify
144 	 * the version.
145 	 */
146 	if (readl_relaxed(ti_32k_timer.base + OMAP2_32KSYNCNT_REV_OFF) &
147 			OMAP2_32KSYNCNT_REV_SCHEME)
148 		ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_HIGH;
149 	else
150 		ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW;
151 
152 	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
153 
154 	ret = clocksource_register_hz(&ti_32k_timer.cs, 32768);
155 	if (ret) {
156 		pr_err("32k_counter: can't register clocksource\n");
157 		return ret;
158 	}
159 
160 	sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
161 
162 	return 0;
163 }
164 TIMER_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k",
165 		ti_32k_timer_init);
166