1 /** 2 * timer-ti-32k.c - OMAP2 32k Timer Support 3 * 4 * Copyright (C) 2009 Nokia Corporation 5 * 6 * Update to use new clocksource/clockevent layers 7 * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> 8 * Copyright (C) 2007 MontaVista Software, Inc. 9 * 10 * Original driver: 11 * Copyright (C) 2005 Nokia Corporation 12 * Author: Paul Mundt <paul.mundt@nokia.com> 13 * Juha Yrjölä <juha.yrjola@nokia.com> 14 * OMAP Dual-mode timer framework support by Timo Teras 15 * 16 * Some parts based off of TI's 24xx code: 17 * 18 * Copyright (C) 2004-2009 Texas Instruments, Inc. 19 * 20 * Roughly modelled after the OMAP1 MPU timer code. 21 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> 22 * 23 * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com 24 * 25 * This program is free software: you can redistribute it and/or modify 26 * it under the terms of the GNU General Public License version 2 of 27 * the License as published by the Free Software Foundation. 28 * 29 * This program is distributed in the hope that it will be useful, 30 * but WITHOUT ANY WARRANTY; without even the implied warranty of 31 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 32 * GNU General Public License for more details. 33 * 34 * You should have received a copy of the GNU General Public License 35 * along with this program. If not, see <http://www.gnu.org/licenses/>. 36 */ 37 38 #include <linux/init.h> 39 #include <linux/time.h> 40 #include <linux/sched_clock.h> 41 #include <linux/clocksource.h> 42 #include <linux/of.h> 43 #include <linux/of_address.h> 44 45 /* 46 * 32KHz clocksource ... always available, on pretty most chips except 47 * OMAP 730 and 1510. Other timers could be used as clocksources, with 48 * higher resolution in free-running counter modes (e.g. 12 MHz xtal), 49 * but systems won't necessarily want to spend resources that way. 50 */ 51 52 #define OMAP2_32KSYNCNT_REV_OFF 0x0 53 #define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) 54 #define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10 55 #define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30 56 57 struct ti_32k { 58 void __iomem *base; 59 void __iomem *counter; 60 struct clocksource cs; 61 }; 62 63 static inline struct ti_32k *to_ti_32k(struct clocksource *cs) 64 { 65 return container_of(cs, struct ti_32k, cs); 66 } 67 68 static u64 notrace ti_32k_read_cycles(struct clocksource *cs) 69 { 70 struct ti_32k *ti = to_ti_32k(cs); 71 72 return (u64)readl_relaxed(ti->counter); 73 } 74 75 static struct ti_32k ti_32k_timer = { 76 .cs = { 77 .name = "32k_counter", 78 .rating = 250, 79 .read = ti_32k_read_cycles, 80 .mask = CLOCKSOURCE_MASK(32), 81 .flags = CLOCK_SOURCE_IS_CONTINUOUS, 82 }, 83 }; 84 85 static u64 notrace omap_32k_read_sched_clock(void) 86 { 87 return ti_32k_read_cycles(&ti_32k_timer.cs); 88 } 89 90 static int __init ti_32k_timer_init(struct device_node *np) 91 { 92 int ret; 93 94 ti_32k_timer.base = of_iomap(np, 0); 95 if (!ti_32k_timer.base) { 96 pr_err("Can't ioremap 32k timer base\n"); 97 return -ENXIO; 98 } 99 100 if (!of_machine_is_compatible("ti,am43")) 101 ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP; 102 103 ti_32k_timer.counter = ti_32k_timer.base; 104 105 /* 106 * 32k sync Counter IP register offsets vary between the highlander 107 * version and the legacy ones. 108 * 109 * The 'SCHEME' bits(30-31) of the revision register is used to identify 110 * the version. 111 */ 112 if (readl_relaxed(ti_32k_timer.base + OMAP2_32KSYNCNT_REV_OFF) & 113 OMAP2_32KSYNCNT_REV_SCHEME) 114 ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_HIGH; 115 else 116 ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW; 117 118 ret = clocksource_register_hz(&ti_32k_timer.cs, 32768); 119 if (ret) { 120 pr_err("32k_counter: can't register clocksource\n"); 121 return ret; 122 } 123 124 sched_clock_register(omap_32k_read_sched_clock, 32, 32768); 125 pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n"); 126 127 return 0; 128 } 129 TIMER_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k", 130 ti_32k_timer_init); 131