1 /*
2  * Keystone broadcast clock-event
3  *
4  * Copyright 2013 Texas Instruments, Inc.
5  *
6  * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  *
12  */
13 
14 #include <linux/clk.h>
15 #include <linux/clockchips.h>
16 #include <linux/clocksource.h>
17 #include <linux/interrupt.h>
18 #include <linux/of_address.h>
19 #include <linux/of_irq.h>
20 
21 #define TIMER_NAME			"timer-keystone"
22 
23 /* Timer register offsets */
24 #define TIM12				0x10
25 #define TIM34				0x14
26 #define PRD12				0x18
27 #define PRD34				0x1c
28 #define TCR				0x20
29 #define TGCR				0x24
30 #define INTCTLSTAT			0x44
31 
32 /* Timer register bitfields */
33 #define TCR_ENAMODE_MASK		0xC0
34 #define TCR_ENAMODE_ONESHOT_MASK	0x40
35 #define TCR_ENAMODE_PERIODIC_MASK	0x80
36 
37 #define TGCR_TIM_UNRESET_MASK		0x03
38 #define INTCTLSTAT_ENINT_MASK		0x01
39 
40 /**
41  * struct keystone_timer: holds timer's data
42  * @base: timer memory base address
43  * @hz_period: cycles per HZ period
44  * @event_dev: event device based on timer
45  */
46 static struct keystone_timer {
47 	void __iomem *base;
48 	unsigned long hz_period;
49 	struct clock_event_device event_dev;
50 } timer;
51 
52 static inline u32 keystone_timer_readl(unsigned long rg)
53 {
54 	return readl_relaxed(timer.base + rg);
55 }
56 
57 static inline void keystone_timer_writel(u32 val, unsigned long rg)
58 {
59 	writel_relaxed(val, timer.base + rg);
60 }
61 
62 /**
63  * keystone_timer_barrier: write memory barrier
64  * use explicit barrier to avoid using readl/writel non relaxed function
65  * variants, because in our case non relaxed variants hide the true places
66  * where barrier is needed.
67  */
68 static inline void keystone_timer_barrier(void)
69 {
70 	__iowmb();
71 }
72 
73 /**
74  * keystone_timer_config: configures timer to work in oneshot/periodic modes.
75  * @ mask: mask of the mode to configure
76  * @ period: cycles number to configure for
77  */
78 static int keystone_timer_config(u64 period, int mask)
79 {
80 	u32 tcr;
81 	u32 off;
82 
83 	tcr = keystone_timer_readl(TCR);
84 	off = tcr & ~(TCR_ENAMODE_MASK);
85 
86 	/* set enable mode */
87 	tcr |= mask;
88 
89 	/* disable timer */
90 	keystone_timer_writel(off, TCR);
91 	/* here we have to be sure the timer has been disabled */
92 	keystone_timer_barrier();
93 
94 	/* reset counter to zero, set new period */
95 	keystone_timer_writel(0, TIM12);
96 	keystone_timer_writel(0, TIM34);
97 	keystone_timer_writel(period & 0xffffffff, PRD12);
98 	keystone_timer_writel(period >> 32, PRD34);
99 
100 	/*
101 	 * enable timer
102 	 * here we have to be sure that CNTLO, CNTHI, PRDLO, PRDHI registers
103 	 * have been written.
104 	 */
105 	keystone_timer_barrier();
106 	keystone_timer_writel(tcr, TCR);
107 	return 0;
108 }
109 
110 static void keystone_timer_disable(void)
111 {
112 	u32 tcr;
113 
114 	tcr = keystone_timer_readl(TCR);
115 
116 	/* disable timer */
117 	tcr &= ~(TCR_ENAMODE_MASK);
118 	keystone_timer_writel(tcr, TCR);
119 }
120 
121 static irqreturn_t keystone_timer_interrupt(int irq, void *dev_id)
122 {
123 	struct clock_event_device *evt = dev_id;
124 
125 	evt->event_handler(evt);
126 	return IRQ_HANDLED;
127 }
128 
129 static int keystone_set_next_event(unsigned long cycles,
130 				  struct clock_event_device *evt)
131 {
132 	return keystone_timer_config(cycles, TCR_ENAMODE_ONESHOT_MASK);
133 }
134 
135 static int keystone_shutdown(struct clock_event_device *evt)
136 {
137 	keystone_timer_disable();
138 	return 0;
139 }
140 
141 static int keystone_set_periodic(struct clock_event_device *evt)
142 {
143 	keystone_timer_config(timer.hz_period, TCR_ENAMODE_PERIODIC_MASK);
144 	return 0;
145 }
146 
147 static void __init keystone_timer_init(struct device_node *np)
148 {
149 	struct clock_event_device *event_dev = &timer.event_dev;
150 	unsigned long rate;
151 	struct clk *clk;
152 	int irq, error;
153 
154 	irq  = irq_of_parse_and_map(np, 0);
155 	if (irq == NO_IRQ) {
156 		pr_err("%s: failed to map interrupts\n", __func__);
157 		return;
158 	}
159 
160 	timer.base = of_iomap(np, 0);
161 	if (!timer.base) {
162 		pr_err("%s: failed to map registers\n", __func__);
163 		return;
164 	}
165 
166 	clk = of_clk_get(np, 0);
167 	if (IS_ERR(clk)) {
168 		pr_err("%s: failed to get clock\n", __func__);
169 		iounmap(timer.base);
170 		return;
171 	}
172 
173 	error = clk_prepare_enable(clk);
174 	if (error) {
175 		pr_err("%s: failed to enable clock\n", __func__);
176 		goto err;
177 	}
178 
179 	rate = clk_get_rate(clk);
180 
181 	/* disable, use internal clock source */
182 	keystone_timer_writel(0, TCR);
183 	/* here we have to be sure the timer has been disabled */
184 	keystone_timer_barrier();
185 
186 	/* reset timer as 64-bit, no pre-scaler, plus features are disabled */
187 	keystone_timer_writel(0, TGCR);
188 
189 	/* unreset timer */
190 	keystone_timer_writel(TGCR_TIM_UNRESET_MASK, TGCR);
191 
192 	/* init counter to zero */
193 	keystone_timer_writel(0, TIM12);
194 	keystone_timer_writel(0, TIM34);
195 
196 	timer.hz_period = DIV_ROUND_UP(rate, HZ);
197 
198 	/* enable timer interrupts */
199 	keystone_timer_writel(INTCTLSTAT_ENINT_MASK, INTCTLSTAT);
200 
201 	error = request_irq(irq, keystone_timer_interrupt, IRQF_TIMER,
202 			    TIMER_NAME, event_dev);
203 	if (error) {
204 		pr_err("%s: failed to setup irq\n", __func__);
205 		goto err;
206 	}
207 
208 	/* setup clockevent */
209 	event_dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
210 	event_dev->set_next_event = keystone_set_next_event;
211 	event_dev->set_state_shutdown = keystone_shutdown;
212 	event_dev->set_state_periodic = keystone_set_periodic;
213 	event_dev->set_state_oneshot = keystone_shutdown;
214 	event_dev->cpumask = cpu_all_mask;
215 	event_dev->owner = THIS_MODULE;
216 	event_dev->name = TIMER_NAME;
217 	event_dev->irq = irq;
218 
219 	clockevents_config_and_register(event_dev, rate, 1, ULONG_MAX);
220 
221 	pr_info("keystone timer clock @%lu Hz\n", rate);
222 	return;
223 err:
224 	clk_put(clk);
225 	iounmap(timer.base);
226 }
227 
228 CLOCKSOURCE_OF_DECLARE(keystone_timer, "ti,keystone-timer",
229 					keystone_timer_init);
230